Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes
Merge "at91: fixes for v3.18 #1" from Nicholas Ferre:
First AT91 fixes for 3.18:
- one more MAINTAINERS entry for the SSC driver
- a fix for the newly introduced power/reset driver
- a fix on at91sam9263 USB due to PLLB misconfiguration
* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: at91/dt: sam9263: fix PLLB frequencies
power: reset: at91-reset: fix power down register
MAINTAINERS: add atmel ssc driver maintainer entry
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 24036c4..ce2ef5b 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -30,7 +30,6 @@
/* kHz uV */
666667 1000000
333334 1000000
- 222223 1000000
>;
};
@@ -65,7 +64,7 @@
interrupt-parent = <&intc>;
ranges;
- adc@f8007100 {
+ adc: adc@f8007100 {
compatible = "xlnx,zynq-xadc-1.00.a";
reg = <0xf8007100 0x20>;
interrupts = <0 7 4>;
@@ -137,7 +136,7 @@
<0xF8F00100 0x100>;
};
- L2: cache-controller {
+ L2: cache-controller@f8f02000 {
compatible = "arm,pl310-cache";
reg = <0xF8F02000 0x1000>;
arm,data-latency = <3 2 2>;
@@ -146,10 +145,10 @@
cache-level = <2>;
};
- memory-controller@f8006000 {
+ mc: memory-controller@f8006000 {
compatible = "xlnx,zynq-ddrc-a05";
reg = <0xf8006000 0x1000>;
- } ;
+ };
uart0: serial@e0000000 {
compatible = "xlnx,xuartps", "cdns,uart-r1p8";
@@ -195,7 +194,7 @@
gem0: ethernet@e000b000 {
compatible = "cdns,gem";
- reg = <0xe000b000 0x4000>;
+ reg = <0xe000b000 0x1000>;
status = "disabled";
interrupts = <0 22 4>;
clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
@@ -206,7 +205,7 @@
gem1: ethernet@e000c000 {
compatible = "cdns,gem";
- reg = <0xe000c000 0x4000>;
+ reg = <0xe000c000 0x1000>;
status = "disabled";
interrupts = <0 45 4>;
clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
@@ -315,5 +314,16 @@
reg = <0xf8f00600 0x20>;
clocks = <&clkc 4>;
};
+
+ watchdog0: watchdog@f8005000 {
+ clocks = <&clkc 45>;
+ compatible = "xlnx,zynq-wdt-r1p2";
+ device_type = "watchdog";
+ interrupt-parent = <&intc>;
+ interrupts = <0 9 1>;
+ reg = <0xf8005000 0x1000>;
+ reset = <0>;
+ timeout-sec = <10>;
+ };
};
};
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 491b7d5..709ecc9 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -353,6 +353,7 @@
CONFIG_MMC_SUNXI=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 8470453..f7ac037 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -76,6 +76,7 @@
CONFIG_SUNXI_WATCHDOG=y
CONFIG_MFD_AXP20X=y
CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y