V4L/DVB (3653h): Move usb v4l docs into Documentation/video4linux
- Move documentation for usb v4l devices from
Documentation/usb to Documentation/video4linux.
- Removed trailing whitespace.
- Update Kconfig help text links to reflect the new file locations.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/Documentation/video4linux/stv680.txt b/Documentation/video4linux/stv680.txt
new file mode 100644
index 0000000..4f8946f
--- /dev/null
+++ b/Documentation/video4linux/stv680.txt
@@ -0,0 +1,53 @@
+Linux driver for STV0680 based USB cameras
+
+Copyright, 2001, Kevin Sisson
+
+
+INTRODUCTION:
+
+STMicroelectronics produces the STV0680B chip, which comes in two
+types, -001 and -003. The -003 version allows the recording and downloading
+of sound clips from the camera, and allows a flash attachment. Otherwise,
+it uses the same commands as the -001 version. Both versions support a
+variety of SDRAM sizes and sensors, allowing for a maximum of 26 VGA or 20
+CIF pictures. The STV0680 supports either a serial or a usb interface, and
+video is possible through the usb interface.
+
+The following cameras are known to work with this driver, although any
+camera with Vendor/Product codes of 0553/0202 should work:
+
+Aiptek Pencam (various models)
+Nisis QuickPix 2
+Radio Shack 'Kid's digital camera' (#60-1207)
+At least one Trust Spycam model
+Several other European brand models
+
+WHAT YOU NEED:
+
+- USB support
+- VIDEO4LINUX support
+
+More information about USB support for linux can be found at:
+http://www.linux-usb.org
+
+
+MODULE OPTIONS:
+
+When the driver is compiled as a module, you can set a "swapRGB=1"
+option, if necessary, for those applications that require it
+(such as xawtv). However, the driver should detect and set this
+automatically, so this option should not normally be used.
+
+
+KNOWN PROBLEMS:
+
+The driver seems to work better with the usb-ohci than the usb-uhci host
+controller driver.
+
+HELP:
+
+The latest info on this driver can be found at:
+http://personal.clt.bellsouth.net/~kjsisson or at
+http://stv0680-usb.sourceforge.net
+
+Any questions to me can be send to: kjsisson@bellsouth.net
\ No newline at end of file