spi: spi-omap2-mcspi.c: fix coding style
This patch fixes some indentation errors.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index b610f52..31f6e84 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1020,7 +1020,7 @@
}
static int omap2_mcspi_transfer_one_message(struct spi_master *master,
- struct spi_message *m)
+ struct spi_message *m)
{
struct omap2_mcspi *mcspi;
struct spi_transfer *t;
@@ -1041,7 +1041,7 @@
|| (len && !(rx_buf || tx_buf))
|| (t->bits_per_word &&
( t->bits_per_word < 4
- || t->bits_per_word > 32))) {
+ || t->bits_per_word > 32))) {
dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
t->speed_hz,
len,
@@ -1052,8 +1052,8 @@
}
if (t->speed_hz && t->speed_hz < (OMAP2_MCSPI_MAX_FREQ >> 15)) {
dev_dbg(mcspi->dev, "speed_hz %d below minimum %d Hz\n",
- t->speed_hz,
- OMAP2_MCSPI_MAX_FREQ >> 15);
+ t->speed_hz,
+ OMAP2_MCSPI_MAX_FREQ >> 15);
return -EINVAL;
}
@@ -1099,7 +1099,7 @@
return ret;
mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
- OMAP2_MCSPI_WAKEUPENABLE_WKEN);
+ OMAP2_MCSPI_WAKEUPENABLE_WKEN);
ctx->wakeupenable = OMAP2_MCSPI_WAKEUPENABLE_WKEN;
omap2_mcspi_set_master_mode(master);
@@ -1228,7 +1228,7 @@
sprintf(dma_ch_name, "rx%d", i);
dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
- dma_ch_name);
+ dma_ch_name);
if (!dma_res) {
dev_dbg(&pdev->dev, "cannot get DMA RX channel\n");
status = -ENODEV;
@@ -1238,7 +1238,7 @@
mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start;
sprintf(dma_ch_name, "tx%d", i);
dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
- dma_ch_name);
+ dma_ch_name);
if (!dma_res) {
dev_dbg(&pdev->dev, "cannot get DMA TX channel\n");
status = -ENODEV;
@@ -1254,7 +1254,7 @@
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl))
dev_warn(&pdev->dev,
- "pins are not configured from the driver\n");
+ "pins are not configured from the driver\n");
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);