mlxsw: spectrum: Introduce port splitting
Allow a user to split or unsplit a port using the newly introduced
devlink ops.
Once split, the original netdev is destroyed and 2 or 4 others are
created, according to user configuration. The new ports are like any
other port, with the sole difference of supporting a lower maximum
speed. When unsplit, the reverse process takes place.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 926019e..53487d3 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -321,6 +321,22 @@
return 0;
}
+static int mlxsw_sp_port_module_map(struct mlxsw_sp *mlxsw_sp, u8 local_port,
+ u8 module, u8 width, u8 lane)
+{
+ char pmlp_pl[MLXSW_REG_PMLP_LEN];
+ int i;
+
+ mlxsw_reg_pmlp_pack(pmlp_pl, local_port);
+ mlxsw_reg_pmlp_width_set(pmlp_pl, width);
+ for (i = 0; i < width; i++) {
+ mlxsw_reg_pmlp_module_set(pmlp_pl, i, module);
+ mlxsw_reg_pmlp_tx_lane_set(pmlp_pl, i, lane + i); /* Rx & Tx */
+ }
+
+ return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(pmlp), pmlp_pl);
+}
+
static int mlxsw_sp_port_module_unmap(struct mlxsw_sp *mlxsw_sp, u8 local_port)
{
char pmlp_pl[MLXSW_REG_PMLP_LEN];
@@ -1284,6 +1300,18 @@
return ptys_proto;
}
+static u32 mlxsw_sp_to_ptys_upper_speed(u32 upper_speed)
+{
+ u32 ptys_proto = 0;
+ int i;
+
+ for (i = 0; i < MLXSW_SP_PORT_LINK_MODE_LEN; i++) {
+ if (mlxsw_sp_port_link_mode[i].speed <= upper_speed)
+ ptys_proto |= mlxsw_sp_port_link_mode[i].mask;
+ }
+ return ptys_proto;
+}
+
static int mlxsw_sp_port_set_settings(struct net_device *dev,
struct ethtool_cmd *cmd)
{
@@ -1360,7 +1388,22 @@
.set_settings = mlxsw_sp_port_set_settings,
};
-static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port)
+static int
+mlxsw_sp_port_speed_by_width_set(struct mlxsw_sp_port *mlxsw_sp_port, u8 width)
+{
+ struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
+ u32 upper_speed = MLXSW_SP_PORT_BASE_SPEED * width;
+ char ptys_pl[MLXSW_REG_PTYS_LEN];
+ u32 eth_proto_admin;
+
+ eth_proto_admin = mlxsw_sp_to_ptys_upper_speed(upper_speed);
+ mlxsw_reg_ptys_pack(ptys_pl, mlxsw_sp_port->local_port,
+ eth_proto_admin);
+ return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ptys), ptys_pl);
+}
+
+static int __mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
+ bool split, u8 module, u8 width)
{
struct devlink *devlink = priv_to_devlink(mlxsw_sp->core);
struct mlxsw_sp_port *mlxsw_sp_port;
@@ -1376,6 +1419,7 @@
mlxsw_sp_port->dev = dev;
mlxsw_sp_port->mlxsw_sp = mlxsw_sp;
mlxsw_sp_port->local_port = local_port;
+ mlxsw_sp_port->split = split;
bytes = DIV_ROUND_UP(VLAN_N_VID, BITS_PER_BYTE);
mlxsw_sp_port->active_vlans = kzalloc(bytes, GFP_KERNEL);
if (!mlxsw_sp_port->active_vlans) {
@@ -1417,6 +1461,8 @@
dev->hard_header_len += MLXSW_TXHDR_LEN;
devlink_port = &mlxsw_sp_port->devlink_port;
+ if (mlxsw_sp_port->split)
+ devlink_port_split_set(devlink_port, module);
err = devlink_port_register(devlink, devlink_port, local_port);
if (err) {
dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to register devlink port\n",
@@ -1438,6 +1484,13 @@
goto err_port_swid_set;
}
+ err = mlxsw_sp_port_speed_by_width_set(mlxsw_sp_port, width);
+ if (err) {
+ dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to enable speeds\n",
+ mlxsw_sp_port->local_port);
+ goto err_port_speed_by_width_set;
+ }
+
err = mlxsw_sp_port_mtu_set(mlxsw_sp_port, ETH_DATA_LEN);
if (err) {
dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to set MTU\n",
@@ -1479,6 +1532,7 @@
err_port_buffers_init:
err_port_admin_status_set:
err_port_mtu_set:
+err_port_speed_by_width_set:
err_port_swid_set:
err_port_system_port_mapping_set:
devlink_port_unregister(&mlxsw_sp_port->devlink_port);
@@ -1494,6 +1548,28 @@
return err;
}
+static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
+ bool split, u8 module, u8 width, u8 lane)
+{
+ int err;
+
+ err = mlxsw_sp_port_module_map(mlxsw_sp, local_port, module, width,
+ lane);
+ if (err)
+ return err;
+
+ err = __mlxsw_sp_port_create(mlxsw_sp, local_port, split, module,
+ width);
+ if (err)
+ goto err_port_create;
+
+ return 0;
+
+err_port_create:
+ mlxsw_sp_port_module_unmap(mlxsw_sp, local_port);
+ return err;
+}
+
static void mlxsw_sp_port_vports_fini(struct mlxsw_sp_port *mlxsw_sp_port)
{
struct net_device *dev = mlxsw_sp_port->dev;
@@ -1562,7 +1638,7 @@
if (!width)
continue;
mlxsw_sp->port_to_module[i] = module;
- err = mlxsw_sp_port_create(mlxsw_sp, i);
+ err = __mlxsw_sp_port_create(mlxsw_sp, i, false, module, width);
if (err)
goto err_port_create;
}
@@ -1576,6 +1652,137 @@
return err;
}
+static u8 mlxsw_sp_cluster_base_port_get(u8 local_port)
+{
+ u8 offset = (local_port - 1) % MLXSW_SP_PORTS_PER_CLUSTER_MAX;
+
+ return local_port - offset;
+}
+
+static int mlxsw_sp_port_split(void *priv, u8 local_port, unsigned int count)
+{
+ struct mlxsw_sp *mlxsw_sp = priv;
+ struct mlxsw_sp_port *mlxsw_sp_port;
+ u8 width = MLXSW_PORT_MODULE_MAX_WIDTH / count;
+ u8 module, cur_width, base_port;
+ int i;
+ int err;
+
+ mlxsw_sp_port = mlxsw_sp->ports[local_port];
+ if (!mlxsw_sp_port) {
+ dev_err(mlxsw_sp->bus_info->dev, "Port number \"%d\" does not exist\n",
+ local_port);
+ return -EINVAL;
+ }
+
+ if (count != 2 && count != 4) {
+ netdev_err(mlxsw_sp_port->dev, "Port can only be split into 2 or 4 ports\n");
+ return -EINVAL;
+ }
+
+ err = mlxsw_sp_port_module_info_get(mlxsw_sp, local_port, &module,
+ &cur_width);
+ if (err) {
+ netdev_err(mlxsw_sp_port->dev, "Failed to get port's width\n");
+ return err;
+ }
+
+ if (cur_width != MLXSW_PORT_MODULE_MAX_WIDTH) {
+ netdev_err(mlxsw_sp_port->dev, "Port cannot be split further\n");
+ return -EINVAL;
+ }
+
+ /* Make sure we have enough slave (even) ports for the split. */
+ if (count == 2) {
+ base_port = local_port;
+ if (mlxsw_sp->ports[base_port + 1]) {
+ netdev_err(mlxsw_sp_port->dev, "Invalid split configuration\n");
+ return -EINVAL;
+ }
+ } else {
+ base_port = mlxsw_sp_cluster_base_port_get(local_port);
+ if (mlxsw_sp->ports[base_port + 1] ||
+ mlxsw_sp->ports[base_port + 3]) {
+ netdev_err(mlxsw_sp_port->dev, "Invalid split configuration\n");
+ return -EINVAL;
+ }
+ }
+
+ for (i = 0; i < count; i++)
+ mlxsw_sp_port_remove(mlxsw_sp, base_port + i);
+
+ for (i = 0; i < count; i++) {
+ err = mlxsw_sp_port_create(mlxsw_sp, base_port + i, true,
+ module, width, i * width);
+ if (err) {
+ dev_err(mlxsw_sp->bus_info->dev, "Failed to create split port\n");
+ goto err_port_create;
+ }
+ }
+
+ return 0;
+
+err_port_create:
+ for (i--; i >= 0; i--)
+ mlxsw_sp_port_remove(mlxsw_sp, base_port + i);
+ for (i = 0; i < count / 2; i++) {
+ module = mlxsw_sp->port_to_module[base_port + i * 2];
+ mlxsw_sp_port_create(mlxsw_sp, base_port + i * 2, false,
+ module, MLXSW_PORT_MODULE_MAX_WIDTH, 0);
+ }
+ return err;
+}
+
+static int mlxsw_sp_port_unsplit(void *priv, u8 local_port)
+{
+ struct mlxsw_sp *mlxsw_sp = priv;
+ struct mlxsw_sp_port *mlxsw_sp_port;
+ u8 module, cur_width, base_port;
+ unsigned int count;
+ int i;
+ int err;
+
+ mlxsw_sp_port = mlxsw_sp->ports[local_port];
+ if (!mlxsw_sp_port) {
+ dev_err(mlxsw_sp->bus_info->dev, "Port number \"%d\" does not exist\n",
+ local_port);
+ return -EINVAL;
+ }
+
+ if (!mlxsw_sp_port->split) {
+ netdev_err(mlxsw_sp_port->dev, "Port wasn't split\n");
+ return -EINVAL;
+ }
+
+ err = mlxsw_sp_port_module_info_get(mlxsw_sp, local_port, &module,
+ &cur_width);
+ if (err) {
+ netdev_err(mlxsw_sp_port->dev, "Failed to get port's width\n");
+ return err;
+ }
+ count = cur_width == 1 ? 4 : 2;
+
+ base_port = mlxsw_sp_cluster_base_port_get(local_port);
+
+ /* Determine which ports to remove. */
+ if (count == 2 && local_port >= base_port + 2)
+ base_port = base_port + 2;
+
+ for (i = 0; i < count; i++)
+ mlxsw_sp_port_remove(mlxsw_sp, base_port + i);
+
+ for (i = 0; i < count / 2; i++) {
+ module = mlxsw_sp->port_to_module[base_port + i * 2];
+ err = mlxsw_sp_port_create(mlxsw_sp, base_port + i * 2, false,
+ module, MLXSW_PORT_MODULE_MAX_WIDTH,
+ 0);
+ if (err)
+ dev_err(mlxsw_sp->bus_info->dev, "Failed to reinstantiate port\n");
+ }
+
+ return 0;
+}
+
static void mlxsw_sp_pude_event_func(const struct mlxsw_reg_info *reg,
char *pude_pl, void *priv)
{
@@ -1999,6 +2206,8 @@
.priv_size = sizeof(struct mlxsw_sp),
.init = mlxsw_sp_init,
.fini = mlxsw_sp_fini,
+ .port_split = mlxsw_sp_port_split,
+ .port_unsplit = mlxsw_sp_port_unsplit,
.txhdr_construct = mlxsw_sp_txhdr_construct,
.txhdr_len = MLXSW_TXHDR_LEN,
.profile = &mlxsw_sp_config_profile,