extcon: max77693: Fix bug of wrong pointer when platform data is not used
This patch fix wrong pointer of platform data. If each machine set
platform data for h/w path or delay time of workqueue, this driver
happen kernel panic related to null pointer.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index b70e381..fea1062 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -1045,7 +1045,6 @@
{
struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev);
- struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
struct max77693_muic_info *info;
int delay_jiffies;
int ret;
@@ -1145,44 +1144,63 @@
goto err_irq;
}
- /* Initialize MUIC register by using platform data */
- for (i = 0 ; i < muic_pdata->num_init_data ; i++) {
- enum max77693_irq_source irq_src = MAX77693_IRQ_GROUP_NR;
+ if (pdata->muic_data) {
+ struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
- max77693_write_reg(info->max77693->regmap_muic,
- muic_pdata->init_data[i].addr,
- muic_pdata->init_data[i].data);
+ /* Initialize MUIC register by using platform data */
+ for (i = 0 ; i < muic_pdata->num_init_data ; i++) {
+ enum max77693_irq_source irq_src
+ = MAX77693_IRQ_GROUP_NR;
- switch (muic_pdata->init_data[i].addr) {
- case MAX77693_MUIC_REG_INTMASK1:
- irq_src = MUIC_INT1;
- break;
- case MAX77693_MUIC_REG_INTMASK2:
- irq_src = MUIC_INT2;
- break;
- case MAX77693_MUIC_REG_INTMASK3:
- irq_src = MUIC_INT3;
- break;
+ max77693_write_reg(info->max77693->regmap_muic,
+ muic_pdata->init_data[i].addr,
+ muic_pdata->init_data[i].data);
+
+ switch (muic_pdata->init_data[i].addr) {
+ case MAX77693_MUIC_REG_INTMASK1:
+ irq_src = MUIC_INT1;
+ break;
+ case MAX77693_MUIC_REG_INTMASK2:
+ irq_src = MUIC_INT2;
+ break;
+ case MAX77693_MUIC_REG_INTMASK3:
+ irq_src = MUIC_INT3;
+ break;
+ }
+
+ if (irq_src < MAX77693_IRQ_GROUP_NR)
+ info->max77693->irq_masks_cur[irq_src]
+ = muic_pdata->init_data[i].data;
}
- if (irq_src < MAX77693_IRQ_GROUP_NR)
- info->max77693->irq_masks_cur[irq_src]
- = muic_pdata->init_data[i].data;
- }
+ /*
+ * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+ * h/w path of COMP2/COMN1 on CONTROL1 register.
+ */
+ if (muic_pdata->path_uart)
+ info->path_uart = muic_pdata->path_uart;
+ else
+ info->path_uart = CONTROL1_SW_UART;
- /*
- * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
- * h/w path of COMP2/COMN1 on CONTROL1 register.
- */
- if (muic_pdata->path_uart)
- info->path_uart = muic_pdata->path_uart;
- else
- info->path_uart = CONTROL1_SW_UART;
+ if (muic_pdata->path_usb)
+ info->path_usb = muic_pdata->path_usb;
+ else
+ info->path_usb = CONTROL1_SW_USB;
- if (muic_pdata->path_usb)
- info->path_usb = muic_pdata->path_usb;
- else
+ /*
+ * Default delay time for detecting cable state
+ * after certain time.
+ */
+ if (muic_pdata->detcable_delay_ms)
+ delay_jiffies =
+ msecs_to_jiffies(muic_pdata->detcable_delay_ms);
+ else
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ } else {
info->path_usb = CONTROL1_SW_USB;
+ info->path_uart = CONTROL1_SW_UART;
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ }
/* Set initial path for UART */
max77693_muic_set_path(info, info->path_uart, true);
@@ -1208,10 +1226,6 @@
* driver should notify cable state to upper layer.
*/
INIT_DELAYED_WORK(&info->wq_detcable, max77693_muic_detect_cable_wq);
- if (muic_pdata->detcable_delay_ms)
- delay_jiffies = msecs_to_jiffies(muic_pdata->detcable_delay_ms);
- else
- delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
schedule_delayed_work(&info->wq_detcable, delay_jiffies);
return ret;