diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 55571ae..599d8bf 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -503,7 +503,7 @@
 
 	switch ( action ) {
 	case ACTION_READ_STATUS:
-		US_DEBUGP("   isd200_action(READ_STATUS)\n");
+		usb_stor_dbg(us, "   isd200_action(READ_STATUS)\n");
 		ata.generic.ActionSelect = ACTION_SELECT_0|ACTION_SELECT_2;
 		ata.generic.RegisterSelect =
 		  REG_CYLINDER_LOW | REG_CYLINDER_HIGH |
@@ -512,7 +512,7 @@
 		break;
 
 	case ACTION_ENUM:
-		US_DEBUGP("   isd200_action(ENUM,0x%02x)\n",value);
+		usb_stor_dbg(us, "   isd200_action(ENUM,0x%02x)\n", value);
 		ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
 					   ACTION_SELECT_3|ACTION_SELECT_4|
 					   ACTION_SELECT_5;
@@ -522,7 +522,7 @@
 		break;
 
 	case ACTION_RESET:
-		US_DEBUGP("   isd200_action(RESET)\n");
+		usb_stor_dbg(us, "   isd200_action(RESET)\n");
 		ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
 					   ACTION_SELECT_3|ACTION_SELECT_4;
 		ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
@@ -531,7 +531,7 @@
 		break;
 
 	case ACTION_REENABLE:
-		US_DEBUGP("   isd200_action(REENABLE)\n");
+		usb_stor_dbg(us, "   isd200_action(REENABLE)\n");
 		ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
 					   ACTION_SELECT_3|ACTION_SELECT_4;
 		ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
@@ -540,7 +540,7 @@
 		break;
 
 	case ACTION_SOFT_RESET:
-		US_DEBUGP("   isd200_action(SOFT_RESET)\n");
+		usb_stor_dbg(us, "   isd200_action(SOFT_RESET)\n");
 		ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_5;
 		ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND;
 		ata.write.DeviceHeadByte = info->DeviceHead;
@@ -549,7 +549,7 @@
 		break;
 
 	case ACTION_IDENTIFY:
-		US_DEBUGP("   isd200_action(IDENTIFY)\n");
+		usb_stor_dbg(us, "   isd200_action(IDENTIFY)\n");
 		ata.generic.RegisterSelect = REG_COMMAND;
 		ata.write.CommandByte = ATA_CMD_ID_ATA;
 		isd200_set_srb(info, DMA_FROM_DEVICE, info->id,
@@ -557,7 +557,7 @@
 		break;
 
 	default:
-		US_DEBUGP("Error: Undefined action %d\n",action);
+		usb_stor_dbg(us, "Error: Undefined action %d\n", action);
 		return ISD200_ERROR;
 	}
 
@@ -567,7 +567,8 @@
 	if (status == USB_STOR_TRANSPORT_GOOD)
 		status = ISD200_GOOD;
 	else {
-		US_DEBUGP("   isd200_action(0x%02x) error: %d\n",action,status);
+		usb_stor_dbg(us, "   isd200_action(0x%02x) error: %d\n",
+			     action, status);
 		status = ISD200_ERROR;
 		/* need to reset device here */
 	}
@@ -589,17 +590,17 @@
 	int retStatus = ISD200_GOOD;
 	int transferStatus;
 
-	US_DEBUGP("Entering isd200_IssueATAReadRegs\n");
+	usb_stor_dbg(us, "Entering isd200_IssueATAReadRegs\n");
 
 	transferStatus = isd200_action( us, ACTION_READ_STATUS,
 				    info->RegsBuf, sizeof(info->ATARegs) );
 	if (transferStatus != ISD200_TRANSPORT_GOOD) {
-		US_DEBUGP("   Error reading ATA registers\n");
+		usb_stor_dbg(us, "   Error reading ATA registers\n");
 		retStatus = ISD200_ERROR;
 	} else {
 		memcpy(info->ATARegs, info->RegsBuf, sizeof(info->ATARegs));
-		US_DEBUGP("   Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n",
-			  info->ATARegs[ATA_REG_ERROR_OFFSET]);
+		usb_stor_dbg(us, "   Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n",
+			     info->ATARegs[ATA_REG_ERROR_OFFSET]);
 	}
 
 	return retStatus;
@@ -629,7 +630,7 @@
 	 * short-circuit all other processing
 	 */
 	if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
-		US_DEBUGP("-- command was aborted\n");
+		usb_stor_dbg(us, "-- command was aborted\n");
 		goto Handle_Abort;
 	}
 
@@ -641,23 +642,23 @@
 		break;
 
 	case USB_STOR_TRANSPORT_NO_SENSE:
-		US_DEBUGP("-- transport indicates protocol failure\n");
+		usb_stor_dbg(us, "-- transport indicates protocol failure\n");
 		srb->result = SAM_STAT_CHECK_CONDITION;
 		return;
 
 	case USB_STOR_TRANSPORT_FAILED:
-		US_DEBUGP("-- transport indicates command failure\n");
+		usb_stor_dbg(us, "-- transport indicates command failure\n");
 		need_auto_sense = 1;
 		break;
 
 	case USB_STOR_TRANSPORT_ERROR:
-		US_DEBUGP("-- transport indicates transport error\n");
+		usb_stor_dbg(us, "-- transport indicates transport error\n");
 		srb->result = DID_ERROR << 16;
 		/* Need reset here */
 		return;
     
 	default:
-		US_DEBUGP("-- transport indicates unknown error\n");   
+		usb_stor_dbg(us, "-- transport indicates unknown error\n");
 		srb->result = DID_ERROR << 16;
 		/* Need reset here */
 		return;
@@ -669,14 +670,14 @@
 	      (srb->cmnd[0] == MODE_SENSE) ||
 	      (srb->cmnd[0] == LOG_SENSE) ||
 	      (srb->cmnd[0] == MODE_SENSE_10))) {
-		US_DEBUGP("-- unexpectedly short transfer\n");
+		usb_stor_dbg(us, "-- unexpectedly short transfer\n");
 		need_auto_sense = 1;
 	}
 
 	if (need_auto_sense) {
 		result = isd200_read_regs(us);
 		if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
-			US_DEBUGP("-- auto-sense aborted\n");
+			usb_stor_dbg(us, "-- auto-sense aborted\n");
 			goto Handle_Abort;
 		}
 		if (result == ISD200_GOOD) {
@@ -710,40 +711,40 @@
 }
 
 #ifdef CONFIG_USB_STORAGE_DEBUG
-static void isd200_log_config( struct isd200_info* info )
+static void isd200_log_config(struct us_data *us, struct isd200_info *info)
 {
-	US_DEBUGP("      Event Notification: 0x%x\n", 
-		  info->ConfigData.EventNotification);
-	US_DEBUGP("      External Clock: 0x%x\n", 
-		  info->ConfigData.ExternalClock);
-	US_DEBUGP("      ATA Init Timeout: 0x%x\n", 
-		  info->ConfigData.ATAInitTimeout);
-	US_DEBUGP("      ATAPI Command Block Size: 0x%x\n", 
-		  (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6);
-	US_DEBUGP("      Master/Slave Selection: 0x%x\n", 
-		  info->ConfigData.ATAConfig & ATACFG_MASTER);
-	US_DEBUGP("      ATAPI Reset: 0x%x\n",
-		  info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET);
-	US_DEBUGP("      ATA Timing: 0x%x\n",
-		  info->ConfigData.ATAConfig & ATACFG_TIMING);
-	US_DEBUGP("      ATA Major Command: 0x%x\n", 
-		  info->ConfigData.ATAMajorCommand);
-	US_DEBUGP("      ATA Minor Command: 0x%x\n", 
-		  info->ConfigData.ATAMinorCommand);
-	US_DEBUGP("      Init Status: 0x%x\n", 
-		  info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS);
-	US_DEBUGP("      Config Descriptor 2: 0x%x\n", 
-		  info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2);
-	US_DEBUGP("      Skip Device Boot: 0x%x\n",
-		  info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT);
-	US_DEBUGP("      ATA 3 State Supsend: 0x%x\n",
-		  info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND);
-	US_DEBUGP("      Descriptor Override: 0x%x\n", 
-		  info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE);
-	US_DEBUGP("      Last LUN Identifier: 0x%x\n",
-		  info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN);
-	US_DEBUGP("      SRST Enable: 0x%x\n", 
-		  info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST);
+	usb_stor_dbg(us, "      Event Notification: 0x%x\n",
+		     info->ConfigData.EventNotification);
+	usb_stor_dbg(us, "      External Clock: 0x%x\n",
+		     info->ConfigData.ExternalClock);
+	usb_stor_dbg(us, "      ATA Init Timeout: 0x%x\n",
+		     info->ConfigData.ATAInitTimeout);
+	usb_stor_dbg(us, "      ATAPI Command Block Size: 0x%x\n",
+		     (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6);
+	usb_stor_dbg(us, "      Master/Slave Selection: 0x%x\n",
+		     info->ConfigData.ATAConfig & ATACFG_MASTER);
+	usb_stor_dbg(us, "      ATAPI Reset: 0x%x\n",
+		     info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET);
+	usb_stor_dbg(us, "      ATA Timing: 0x%x\n",
+		     info->ConfigData.ATAConfig & ATACFG_TIMING);
+	usb_stor_dbg(us, "      ATA Major Command: 0x%x\n",
+		     info->ConfigData.ATAMajorCommand);
+	usb_stor_dbg(us, "      ATA Minor Command: 0x%x\n",
+		     info->ConfigData.ATAMinorCommand);
+	usb_stor_dbg(us, "      Init Status: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS);
+	usb_stor_dbg(us, "      Config Descriptor 2: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2);
+	usb_stor_dbg(us, "      Skip Device Boot: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT);
+	usb_stor_dbg(us, "      ATA 3 State Supsend: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND);
+	usb_stor_dbg(us, "      Descriptor Override: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE);
+	usb_stor_dbg(us, "      Last LUN Identifier: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN);
+	usb_stor_dbg(us, "      SRST Enable: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST);
 }
 #endif
 
@@ -762,9 +763,9 @@
 	int result;
 
 #ifdef CONFIG_USB_STORAGE_DEBUG
-	US_DEBUGP("Entering isd200_write_config\n");
-	US_DEBUGP("   Writing the following ISD200 Config Data:\n");
-	isd200_log_config(info);
+	usb_stor_dbg(us, "Entering isd200_write_config\n");
+	usb_stor_dbg(us, "   Writing the following ISD200 Config Data:\n");
+	isd200_log_config(us, info);
 #endif
 
 	/* let's send the command via the control pipe */
@@ -779,13 +780,13 @@
 		sizeof(info->ConfigData));
 
 	if (result >= 0) {
-		US_DEBUGP("   ISD200 Config Data was written successfully\n");
+		usb_stor_dbg(us, "   ISD200 Config Data was written successfully\n");
 	} else {
-		US_DEBUGP("   Request to write ISD200 Config Data failed!\n");
+		usb_stor_dbg(us, "   Request to write ISD200 Config Data failed!\n");
 		retStatus = ISD200_ERROR;
 	}
 
-	US_DEBUGP("Leaving isd200_write_config %08X\n", retStatus);
+	usb_stor_dbg(us, "Leaving isd200_write_config %08X\n", retStatus);
 	return retStatus;
 }
 
@@ -804,7 +805,7 @@
 	int retStatus = ISD200_GOOD;
 	int result;
 
-	US_DEBUGP("Entering isd200_read_config\n");
+	usb_stor_dbg(us, "Entering isd200_read_config\n");
 
 	/* read the configuration information from ISD200.  Use this to */
 	/* determine what the special ATA CDB bytes are.		*/
@@ -821,16 +822,16 @@
 
 
 	if (result >= 0) {
-		US_DEBUGP("   Retrieved the following ISD200 Config Data:\n");
+		usb_stor_dbg(us, "   Retrieved the following ISD200 Config Data:\n");
 #ifdef CONFIG_USB_STORAGE_DEBUG
-		isd200_log_config(info);
+		isd200_log_config(us, info);
 #endif
 	} else {
-		US_DEBUGP("   Request to get ISD200 Config Data failed!\n");
+		usb_stor_dbg(us, "   Request to get ISD200 Config Data failed!\n");
 		retStatus = ISD200_ERROR;
 	}
 
-	US_DEBUGP("Leaving isd200_read_config %08X\n", retStatus);
+	usb_stor_dbg(us, "Leaving isd200_read_config %08X\n", retStatus);
 	return retStatus;
 }
 
@@ -848,15 +849,15 @@
 	int retStatus = ISD200_GOOD;
 	int transferStatus;
 
-	US_DEBUGP("Entering isd200_atapi_soft_reset\n");
+	usb_stor_dbg(us, "Entering isd200_atapi_soft_reset\n");
 
 	transferStatus = isd200_action( us, ACTION_SOFT_RESET, NULL, 0 );
 	if (transferStatus != ISD200_TRANSPORT_GOOD) {
-		US_DEBUGP("   Error issuing Atapi Soft Reset\n");
+		usb_stor_dbg(us, "   Error issuing Atapi Soft Reset\n");
 		retStatus = ISD200_ERROR;
 	}
 
-	US_DEBUGP("Leaving isd200_atapi_soft_reset %08X\n", retStatus);
+	usb_stor_dbg(us, "Leaving isd200_atapi_soft_reset %08X\n", retStatus);
 	return retStatus;
 }
 
@@ -874,13 +875,13 @@
 	int retStatus = ISD200_GOOD;
 	int transferStatus;
 
-	US_DEBUGP("Entering isd200_SRST\n");
+	usb_stor_dbg(us, "Entering isd200_SRST\n");
 
 	transferStatus = isd200_action( us, ACTION_RESET, NULL, 0 );
 
 	/* check to see if this request failed */
 	if (transferStatus != ISD200_TRANSPORT_GOOD) {
-		US_DEBUGP("   Error issuing SRST\n");
+		usb_stor_dbg(us, "   Error issuing SRST\n");
 		retStatus = ISD200_ERROR;
 	} else {
 		/* delay 10ms to give the drive a chance to see it */
@@ -888,7 +889,7 @@
 
 		transferStatus = isd200_action( us, ACTION_REENABLE, NULL, 0 );
 		if (transferStatus != ISD200_TRANSPORT_GOOD) {
-			US_DEBUGP("   Error taking drive out of reset\n");
+			usb_stor_dbg(us, "   Error taking drive out of reset\n");
 			retStatus = ISD200_ERROR;
 		} else {
 			/* delay 50ms to give the drive a chance to recover after SRST */
@@ -896,7 +897,7 @@
 		}
 	}
 
-	US_DEBUGP("Leaving isd200_srst %08X\n", retStatus);
+	usb_stor_dbg(us, "Leaving isd200_srst %08X\n", retStatus);
 	return retStatus;
 }
 
@@ -938,13 +939,13 @@
 
 		if (!detect) {
 			if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) {
-				US_DEBUGP("   %s status is still BSY, try again...\n",
-					  master_slave == ATA_ADDRESS_DEVHEAD_STD ?
-					  "Master" : "Slave");
+				usb_stor_dbg(us, "   %s status is still BSY, try again...\n",
+					     master_slave == ATA_ADDRESS_DEVHEAD_STD ?
+					     "Master" : "Slave");
 			} else {
-				US_DEBUGP("   %s status !BSY, continue with next operation\n",
-					  master_slave == ATA_ADDRESS_DEVHEAD_STD ?
-					  "Master" : "Slave");
+				usb_stor_dbg(us, "   %s status !BSY, continue with next operation\n",
+					     master_slave == ATA_ADDRESS_DEVHEAD_STD ?
+					     "Master" : "Slave");
 				break;
 			}
 		}
@@ -953,11 +954,11 @@
 		/* ATA_ERR (workaround for Archos CD-ROM) */
 		else if (regs[ATA_REG_STATUS_OFFSET] &
 			 (ATA_BUSY | ATA_DF | ATA_ERR)) {
-			US_DEBUGP("   Status indicates it is not ready, try again...\n");
+			usb_stor_dbg(us, "   Status indicates it is not ready, try again...\n");
 		}
 		/* check for DRDY, ATA devices set DRDY after SRST */
 		else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) {
-			US_DEBUGP("   Identified ATA device\n");
+			usb_stor_dbg(us, "   Identified ATA device\n");
 			info->DeviceFlags |= DF_ATA_DEVICE;
 			info->DeviceHead = master_slave;
 			break;
@@ -978,27 +979,27 @@
 			*/
 			if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) &&
 			    !recheckAsMaster) {
-				US_DEBUGP("   Identified ATAPI device as slave.  Rechecking again as master\n");
+				usb_stor_dbg(us, "   Identified ATAPI device as slave.  Rechecking again as master\n");
 				recheckAsMaster = 1;
 				master_slave = ATA_ADDRESS_DEVHEAD_STD;
 			} else {
-				US_DEBUGP("   Identified ATAPI device\n");
+				usb_stor_dbg(us, "   Identified ATAPI device\n");
 				info->DeviceHead = master_slave;
 			      
 				status = isd200_atapi_soft_reset(us);
 				break;
 			}
 		} else {
- 			US_DEBUGP("   Not ATA, not ATAPI. Weird.\n");
+			usb_stor_dbg(us, "   Not ATA, not ATAPI - Weird\n");
 			break;
 		}
 
 		/* check for timeout on this request */
 		if (time_after_eq(jiffies, endTime)) {
 			if (!detect)
-				US_DEBUGP("   BSY check timeout, just continue with next operation...\n");
+				usb_stor_dbg(us, "   BSY check timeout, just continue with next operation...\n");
 			else
-				US_DEBUGP("   Device detect timeout!\n");
+				usb_stor_dbg(us, "   Device detect timeout!\n");
 			break;
 		}
 	}
@@ -1020,7 +1021,7 @@
 	struct isd200_info *info = (struct isd200_info *)us->extra;
 	int retStatus = ISD200_GOOD;
 
-	US_DEBUGP("Entering isd200_manual_enum\n");
+	usb_stor_dbg(us, "Entering isd200_manual_enum\n");
 
 	retStatus = isd200_read_config(us);
 	if (retStatus == ISD200_GOOD) {
@@ -1039,14 +1040,15 @@
 
 		isslave = (info->DeviceHead & ATA_ADDRESS_DEVHEAD_SLAVE) ? 1 : 0;
 		if (!(info->ConfigData.ATAConfig & ATACFG_MASTER)) {
-			US_DEBUGP("   Setting Master/Slave selection to %d\n", isslave);
+			usb_stor_dbg(us, "   Setting Master/Slave selection to %d\n",
+				     isslave);
 			info->ConfigData.ATAConfig &= 0x3f;
 			info->ConfigData.ATAConfig |= (isslave<<6);
 			retStatus = isd200_write_config(us);
 		}
 	}
 
-	US_DEBUGP("Leaving isd200_manual_enum %08X\n", retStatus);
+	usb_stor_dbg(us, "Leaving isd200_manual_enum %08X\n", retStatus);
 	return(retStatus);
 }
 
@@ -1064,35 +1066,35 @@
 #endif
 }
 
-static void isd200_dump_driveid(u16 *id)
+static void isd200_dump_driveid(struct us_data *us, u16 *id)
 {
-	US_DEBUGP("   Identify Data Structure:\n");
-	US_DEBUGP("      config = 0x%x\n",	  id[ATA_ID_CONFIG]);
-	US_DEBUGP("      cyls = 0x%x\n",	  id[ATA_ID_CYLS]);
-	US_DEBUGP("      heads = 0x%x\n",	  id[ATA_ID_HEADS]);
-	US_DEBUGP("      track_bytes = 0x%x\n",	  id[4]);
-	US_DEBUGP("      sector_bytes = 0x%x\n",  id[5]);
-	US_DEBUGP("      sectors = 0x%x\n",	  id[ATA_ID_SECTORS]);
-	US_DEBUGP("      serial_no[0] = 0x%x\n",  *(char *)&id[ATA_ID_SERNO]);
-	US_DEBUGP("      buf_type = 0x%x\n",	  id[20]);
-	US_DEBUGP("      buf_size = 0x%x\n",	  id[ATA_ID_BUF_SIZE]);
-	US_DEBUGP("      ecc_bytes = 0x%x\n",	  id[22]);
-	US_DEBUGP("      fw_rev[0] = 0x%x\n",	  *(char *)&id[ATA_ID_FW_REV]);
-	US_DEBUGP("      model[0] = 0x%x\n",	  *(char *)&id[ATA_ID_PROD]);
-	US_DEBUGP("      max_multsect = 0x%x\n",  id[ATA_ID_MAX_MULTSECT] & 0xff);
-	US_DEBUGP("      dword_io = 0x%x\n",	  id[ATA_ID_DWORD_IO]);
-	US_DEBUGP("      capability = 0x%x\n",	  id[ATA_ID_CAPABILITY] >> 8);
-	US_DEBUGP("      tPIO = 0x%x\n",	  id[ATA_ID_OLD_PIO_MODES] >> 8);
-	US_DEBUGP("      tDMA = 0x%x\n",	  id[ATA_ID_OLD_DMA_MODES] >> 8);
-	US_DEBUGP("      field_valid = 0x%x\n",	  id[ATA_ID_FIELD_VALID]);
-	US_DEBUGP("      cur_cyls = 0x%x\n",	  id[ATA_ID_CUR_CYLS]);
-	US_DEBUGP("      cur_heads = 0x%x\n",	  id[ATA_ID_CUR_HEADS]);
-	US_DEBUGP("      cur_sectors = 0x%x\n",	  id[ATA_ID_CUR_SECTORS]);
-	US_DEBUGP("      cur_capacity = 0x%x\n",  ata_id_u32(id, 57));
-	US_DEBUGP("      multsect = 0x%x\n",	  id[ATA_ID_MULTSECT] & 0xff);
-	US_DEBUGP("      lba_capacity = 0x%x\n",  ata_id_u32(id, ATA_ID_LBA_CAPACITY));
-	US_DEBUGP("      command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]);
-	US_DEBUGP("      command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]);
+	usb_stor_dbg(us, "   Identify Data Structure:\n");
+	usb_stor_dbg(us, "      config = 0x%x\n",	id[ATA_ID_CONFIG]);
+	usb_stor_dbg(us, "      cyls = 0x%x\n",		id[ATA_ID_CYLS]);
+	usb_stor_dbg(us, "      heads = 0x%x\n",	id[ATA_ID_HEADS]);
+	usb_stor_dbg(us, "      track_bytes = 0x%x\n",	id[4]);
+	usb_stor_dbg(us, "      sector_bytes = 0x%x\n", id[5]);
+	usb_stor_dbg(us, "      sectors = 0x%x\n",	id[ATA_ID_SECTORS]);
+	usb_stor_dbg(us, "      serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]);
+	usb_stor_dbg(us, "      buf_type = 0x%x\n",	id[20]);
+	usb_stor_dbg(us, "      buf_size = 0x%x\n",	id[ATA_ID_BUF_SIZE]);
+	usb_stor_dbg(us, "      ecc_bytes = 0x%x\n",	id[22]);
+	usb_stor_dbg(us, "      fw_rev[0] = 0x%x\n",	*(char *)&id[ATA_ID_FW_REV]);
+	usb_stor_dbg(us, "      model[0] = 0x%x\n",	*(char *)&id[ATA_ID_PROD]);
+	usb_stor_dbg(us, "      max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff);
+	usb_stor_dbg(us, "      dword_io = 0x%x\n",	id[ATA_ID_DWORD_IO]);
+	usb_stor_dbg(us, "      capability = 0x%x\n",	id[ATA_ID_CAPABILITY] >> 8);
+	usb_stor_dbg(us, "      tPIO = 0x%x\n",	  id[ATA_ID_OLD_PIO_MODES] >> 8);
+	usb_stor_dbg(us, "      tDMA = 0x%x\n",	  id[ATA_ID_OLD_DMA_MODES] >> 8);
+	usb_stor_dbg(us, "      field_valid = 0x%x\n",	id[ATA_ID_FIELD_VALID]);
+	usb_stor_dbg(us, "      cur_cyls = 0x%x\n",	id[ATA_ID_CUR_CYLS]);
+	usb_stor_dbg(us, "      cur_heads = 0x%x\n",	id[ATA_ID_CUR_HEADS]);
+	usb_stor_dbg(us, "      cur_sectors = 0x%x\n",	id[ATA_ID_CUR_SECTORS]);
+	usb_stor_dbg(us, "      cur_capacity = 0x%x\n", ata_id_u32(id, 57));
+	usb_stor_dbg(us, "      multsect = 0x%x\n",	id[ATA_ID_MULTSECT] & 0xff);
+	usb_stor_dbg(us, "      lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY));
+	usb_stor_dbg(us, "      command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]);
+	usb_stor_dbg(us, "      command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]);
 }
 
 /**************************************************************************
@@ -1109,7 +1111,7 @@
 	int retStatus = ISD200_GOOD;
 	u16 *id = info->id;
 
-	US_DEBUGP("Entering isd200_get_inquiry_data\n");
+	usb_stor_dbg(us, "Entering isd200_get_inquiry_data\n");
 
 	/* set default to Master */
 	info->DeviceHead = ATA_ADDRESS_DEVHEAD_STD;
@@ -1127,7 +1129,7 @@
 							id, ATA_ID_WORDS * 2);
 			if (transferStatus != ISD200_TRANSPORT_GOOD) {
 				/* Error issuing ATA Command Identify */
-				US_DEBUGP("   Error issuing ATA Command Identify\n");
+				usb_stor_dbg(us, "   Error issuing ATA Command Identify\n");
 				retStatus = ISD200_ERROR;
 			} else {
 				/* ATA Command Identify successful */
@@ -1136,7 +1138,7 @@
 				__u16 *dest;
 
 				isd200_fix_driveid(id);
-				isd200_dump_driveid(id);
+				isd200_dump_driveid(us, id);
 
 				memset(&info->InquiryData, 0, sizeof(info->InquiryData));
 
@@ -1170,7 +1172,7 @@
 
 				/* determine if it supports Media Status Notification */
 				if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) {
-					US_DEBUGP("   Device supports Media Status Notification\n");
+					usb_stor_dbg(us, "   Device supports Media Status Notification\n");
 
 					/* Indicate that it is enabled, even though it is not
 					 * This allows the lock/unlock of the media to work
@@ -1190,7 +1192,8 @@
 			us->protocol_name = "Transparent SCSI";
 			us->proto_handler = usb_stor_transparent_scsi_command;
 
-			US_DEBUGP("Protocol changed to: %s\n", us->protocol_name);
+			usb_stor_dbg(us, "Protocol changed to: %s\n",
+				     us->protocol_name);
 	    
 			/* Free driver structure */	    
 			us->extra_destructor(info);
@@ -1200,7 +1203,7 @@
 		}
 	}
 
-	US_DEBUGP("Leaving isd200_get_inquiry_data %08X\n", retStatus);
+	usb_stor_dbg(us, "Leaving isd200_get_inquiry_data %08X\n", retStatus);
 
 	return(retStatus);
 }
@@ -1231,7 +1234,7 @@
 	/* SCSI Command */
 	switch (srb->cmnd[0]) {
 	case INQUIRY:
-		US_DEBUGP("   ATA OUT - INQUIRY\n");
+		usb_stor_dbg(us, "   ATA OUT - INQUIRY\n");
 
 		/* copy InquiryData */
 		usb_stor_set_xfer_buf((unsigned char *) &info->InquiryData,
@@ -1241,7 +1244,7 @@
 		break;
 
 	case MODE_SENSE:
-		US_DEBUGP("   ATA OUT - SCSIOP_MODE_SENSE\n");
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_MODE_SENSE\n");
 
 		/* Initialize the return buffer */
 		usb_stor_set_xfer_buf(senseData, sizeof(senseData), srb);
@@ -1255,14 +1258,14 @@
 			ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
 			isd200_srb_set_bufflen(srb, 0);
 		} else {
-			US_DEBUGP("   Media Status not supported, just report okay\n");
+			usb_stor_dbg(us, "   Media Status not supported, just report okay\n");
 			srb->result = SAM_STAT_GOOD;
 			sendToTransport = 0;
 		}
 		break;
 
 	case TEST_UNIT_READY:
-		US_DEBUGP("   ATA OUT - SCSIOP_TEST_UNIT_READY\n");
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_TEST_UNIT_READY\n");
 
 		if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED)
 		{
@@ -1273,7 +1276,7 @@
 			ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
 			isd200_srb_set_bufflen(srb, 0);
 		} else {
-			US_DEBUGP("   Media Status not supported, just report okay\n");
+			usb_stor_dbg(us, "   Media Status not supported, just report okay\n");
 			srb->result = SAM_STAT_GOOD;
 			sendToTransport = 0;
 		}
@@ -1284,7 +1287,7 @@
 		unsigned long capacity;
 		struct read_capacity_data readCapacityData;
 
-		US_DEBUGP("   ATA OUT - SCSIOP_READ_CAPACITY\n");
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_READ_CAPACITY\n");
 
 		if (ata_id_has_lba(id))
 			capacity = ata_id_u32(id, ATA_ID_LBA_CAPACITY) - 1;
@@ -1303,7 +1306,7 @@
 	break;
 
 	case READ_10:
-		US_DEBUGP("   ATA OUT - SCSIOP_READ\n");
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_READ\n");
 
 		lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]);
 		blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8];
@@ -1335,7 +1338,7 @@
 		break;
 
 	case WRITE_10:
-		US_DEBUGP("   ATA OUT - SCSIOP_WRITE\n");
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_WRITE\n");
 
 		lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]);
 		blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8];
@@ -1367,10 +1370,11 @@
 		break;
 
 	case ALLOW_MEDIUM_REMOVAL:
-		US_DEBUGP("   ATA OUT - SCSIOP_MEDIUM_REMOVAL\n");
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_MEDIUM_REMOVAL\n");
 
 		if (info->DeviceFlags & DF_REMOVABLE_MEDIA) {
-			US_DEBUGP("   srb->cmnd[4] = 0x%X\n", srb->cmnd[4]);
+			usb_stor_dbg(us, "   srb->cmnd[4] = 0x%X\n",
+				     srb->cmnd[4]);
 	    
 			ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
 			ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
@@ -1380,25 +1384,25 @@
 				ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
 			isd200_srb_set_bufflen(srb, 0);
 		} else {
-			US_DEBUGP("   Not removeable media, just report okay\n");
+			usb_stor_dbg(us, "   Not removeable media, just report okay\n");
 			srb->result = SAM_STAT_GOOD;
 			sendToTransport = 0;
 		}
 		break;
 
 	case START_STOP:    
-		US_DEBUGP("   ATA OUT - SCSIOP_START_STOP_UNIT\n");
-		US_DEBUGP("   srb->cmnd[4] = 0x%X\n", srb->cmnd[4]);
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_START_STOP_UNIT\n");
+		usb_stor_dbg(us, "   srb->cmnd[4] = 0x%X\n", srb->cmnd[4]);
 
 		if ((srb->cmnd[4] & 0x3) == 0x2) {
-			US_DEBUGP("   Media Eject\n");
+			usb_stor_dbg(us, "   Media Eject\n");
 			ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
 			ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
 			ataCdb->generic.TransferBlockSize = 0;
 			ataCdb->generic.RegisterSelect = REG_COMMAND;
 			ataCdb->write.CommandByte = ATA_COMMAND_MEDIA_EJECT;
 		} else if ((srb->cmnd[4] & 0x3) == 0x1) {
-			US_DEBUGP("   Get Media Status\n");
+			usb_stor_dbg(us, "   Get Media Status\n");
 			ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
 			ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
 			ataCdb->generic.TransferBlockSize = 1;
@@ -1406,14 +1410,15 @@
 			ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
 			isd200_srb_set_bufflen(srb, 0);
 		} else {
-			US_DEBUGP("   Nothing to do, just report okay\n");
+			usb_stor_dbg(us, "   Nothing to do, just report okay\n");
 			srb->result = SAM_STAT_GOOD;
 			sendToTransport = 0;
 		}
 		break;
 
 	default:
-		US_DEBUGP("Unsupported SCSI command - 0x%X\n", srb->cmnd[0]);
+		usb_stor_dbg(us, "Unsupported SCSI command - 0x%X\n",
+			     srb->cmnd[0]);
 		srb->result = DID_ERROR << 16;
 		sendToTransport = 0;
 		break;
@@ -1470,8 +1475,7 @@
 	if (retStatus == ISD200_GOOD) {
 		us->extra = info;
 		us->extra_destructor = isd200_free_info_ptrs;
-	} else
-		US_DEBUGP("ERROR - kmalloc failure\n");
+	}
 
 	return retStatus;
 }
@@ -1482,19 +1486,19 @@
 
 static int isd200_Initialization(struct us_data *us)
 {
-	US_DEBUGP("ISD200 Initialization...\n");
+	usb_stor_dbg(us, "ISD200 Initialization...\n");
 
 	/* Initialize ISD200 info struct */
 
 	if (isd200_init_info(us) == ISD200_ERROR) {
-		US_DEBUGP("ERROR Initializing ISD200 Info struct\n");
+		usb_stor_dbg(us, "ERROR Initializing ISD200 Info struct\n");
 	} else {
 		/* Get device specific data */
 
 		if (isd200_get_inquiry_data(us) != ISD200_GOOD)
-			US_DEBUGP("ISD200 Initialization Failure\n");
+			usb_stor_dbg(us, "ISD200 Initialization Failure\n");
 		else
-			US_DEBUGP("ISD200 Initialization complete\n");
+			usb_stor_dbg(us, "ISD200 Initialization complete\n");
 	}
 
 	return 0;
@@ -1519,7 +1523,7 @@
 	/* Make sure driver was initialized */
 
 	if (us->extra == NULL)
-		US_DEBUGP("ERROR Driver not initialized\n");
+		usb_stor_dbg(us, "ERROR Driver not initialized\n");
 
 	scsi_set_resid(srb, 0);
 	/* scsi_bufflen might change in protocol translation to ata */