blob: f6bf107d581e44ed479b5cecbf32325109945000 [file] [log] [blame]
/* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "sdm845-pmic-overlay.dtsi"
#include "sdm845-pinctrl-overlay.dtsi"
#include "sda845-svr-pinctrl-overlay.dtsi"
#include "sdm845-camera-sensor-svr.dtsi"
#include <dt-bindings/clock/mdss-10nm-pll-clk.h>
&qupv3_se10_i2c {
#include "smb1355.dtsi"
};
&vendor {
bluetooth: bt_wcn3990 {
compatible = "qca,wcn3990";
qca,bt-vdd-io-supply = <&pm8998_s3>;
qca,bt-vdd-xtal-supply = <&pm8998_s5>;
qca,bt-vdd-core-supply = <&pm8998_l7>;
qca,bt-vdd-pa-supply = <&pm8998_l17>;
qca,bt-vdd-ldo-supply = <&pm8998_l25>;
qca,bt-vdd-io-voltage-level = <1352000 1352000>;
qca,bt-vdd-xtal-voltage-level = <2040000 2040000>;
qca,bt-vdd-core-voltage-level = <1800000 1800000>;
qca,bt-vdd-pa-voltage-level = <1304000 1304000>;
qca,bt-vdd-ldo-voltage-level = <3312000 3312000>;
qca,bt-vdd-io-current-level = <1>; /* LPM/PFM */
qca,bt-vdd-xtal-current-level = <1>; /* LPM/PFM */
qca,bt-vdd-core-current-level = <1>; /* LPM/PFM */
qca,bt-vdd-pa-current-level = <1>; /* LPM/PFM */
qca,bt-vdd-ldo-current-level = <1>; /* LPM/PFM */
};
svr_batterydata: qcom,battery-data {
qcom,batt-id-range-pct = <15>;
#include "fg-gen3-batterydata-demo-3600mah.dtsi"
};
};
&pmi8998_pdphy {
vbus-supply = <&smb2_vbus>;
};
&qupv3_se6_4uart {
status = "ok";
};
&pmi8998_fg {
qcom,battery-data = <&svr_batterydata>;
qcom,fg-bmd-en-delay-ms = <300>;
};
&pmi8998_charger {
qcom,battery-data = <&svr_batterydata>;
qcom,sw-jeita-enable;
};
&qupv3_se10_i2c {
status = "ok";
};
&smb1355_charger_0 {
status = "ok";
qcom,disable-ctm;
};
&smb1355_charger_1 {
status = "ok";
qcom,disable-ctm;
};
&soc {
qcom,qbt1000 {
status = "disabled";
};
gpio_keys {
compatible = "gpio-keys";
label = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_vol_up_default
&key_home_default
&key_cam_focus_default>;
vol_up {
label = "volume_up";
gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <115>;
gpio-key,wakeup;
debounce-interval = <15>;
linux,can-disable;
};
home {
label = "home"; /* BACK Key*/
gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <158>;
gpio-key,wakeup;
debounce-interval = <15>;
linux,can-disable;
};
key_cam_focus {
label = "Confirm"; /* Confirm Key*/
gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <28>;
gpio-key,wakeup;
debounce-interval = <15>;
linux,can-disable;
};
};
dsi_panel_pwr_supply_amoled: dsi_panel_pwr_supply_amoled {
#address-cells = <1>;
#size-cells = <0>;
qcom,panel-supply-entry@0 {
reg = <0>;
qcom,supply-name = "vddio";
qcom,supply-min-voltage = <1880000>;
qcom,supply-max-voltage = <1880000>;
qcom,supply-enable-load = <62000>;
qcom,supply-disable-load = <80>;
qcom,supply-post-on-sleep = <20>;
};
qcom,panel-supply-entry@1 {
reg = <1>;
qcom,supply-name = "lab";
qcom,supply-min-voltage = <4600000>;
qcom,supply-max-voltage = <6000000>;
qcom,supply-enable-load = <100000>;
qcom,supply-disable-load = <100>;
};
qcom,panel-supply-entry@2 {
reg = <2>;
qcom,supply-name = "ibb";
qcom,supply-min-voltage = <4600000>;
qcom,supply-max-voltage = <6000000>;
qcom,supply-enable-load = <100000>;
qcom,supply-disable-load = <100>;
qcom,supply-post-on-sleep = <20>;
};
qcom,panel-supply-entry@3 {
reg = <3>;
qcom,supply-name = "oled-vdda";
qcom,supply-min-voltage = <3312000>;
qcom,supply-max-voltage = <3312000>;
qcom,supply-enable-load = <857000>;
qcom,supply-disable-load = <0>;
qcom,supply-post-on-sleep = <0>;
};
};
};
&sde_rscc {
status = "disabled";
};
&mdss_dsi0 {
oled-vdda-supply = <&pm8998_l22>;
};
&mdss_dsi1 {
oled-vdda-supply = <&pm8998_l22>;
};
&pmi8998_wled {
status = "ok";
qcom,disp-type-amoled;
qcom,avdd-target-voltage-mv = <7600>;
};
&labibb {
status = "ok";
qcom,qpnp-labibb-mode = "amoled";
qcom,swire-control;
};
&ibb_regulator {
status = "ok";
qcom,qpnp-ibb-init-amoled-voltage = <4600000>;
qcom,qpnp-ibb-discharge-resistor = <300>;
};
&lab_regulator {
status = "ok";
qcom,qpnp-lab-init-amoled-voltage = <4600000>;
};
&mdss_mdp {
connectors = <&sde_wb &sde_dp>;
};
&dsi_dual_test_cmd {
qcom,mdss-dsi-t-clk-post = <0x0e>;
qcom,mdss-dsi-t-clk-pre = <0x35>;
qcom,mdss-dsi-display-timings {
timing@0{
qcom,mdss-dsi-panel-phy-timings =
[00 24 09 09 26 24 09 09 06 03 04 00];
qcom,display-topology = <2 0 2>,
<2 0 2>;
qcom,default-topology-index = <0>;
};
};
};
&dsi_dual_test_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_amoled>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <255>;
qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
qcom,platform-reset-gpio = <&tlmm 6 0>;
qcom,platform-te-gpio = <&tlmm 10 0>;
};
&dsi_dual_test_cmd_display {
qcom,dsi-display-active;
};
&snd_934x {
qcom,msm-mbhc-hphl-swh = <0>;
};
&pmi8998_haptics {
qcom,vmax-mv = <2400>;
qcom,lra-auto-mode;
status = "okay";
};
&qupv3_se9_2uart {
status = "ok";
};
&mdss_mdp {
#cooling-cells = <2>;
};
&pm8998_l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,init-voltage = <1800000>;
};
&pm8998_l15 {
regulator-min-microvolt = <1504000>;
regulator-max-microvolt = <1504000>;
qcom,init-voltage = <1504000>;
};
&pm8998_l16 {
regulator-min-microvolt = <3312000>;
regulator-max-microvolt = <3312000>;
qcom,init-voltage = <3312000>;
};
&pm8998_l19 {
regulator-min-microvolt = <3104000>;
regulator-max-microvolt = <3104000>;
qcom,init-voltage = <3104000>;
};
&ufsphy_mem {
compatible = "qcom,ufs-phy-qmp-v3";
vdda-phy-supply = <&pm8998_l1>; /* 0.88v */
vdda-pll-supply = <&pm8998_l26>; /* 1.2v */
vdda-phy-max-microamp = <62900>;
vdda-pll-max-microamp = <18300>;
status = "ok";
};
&ufshc_mem {
vdd-hba-supply = <&ufs_phy_gdsc>;
vdd-hba-fixed-regulator;
vcc-supply = <&pm8998_l20>;
vcc-voltage-level = <2950000 2960000>;
vccq2-supply = <&pm8998_s4>;
vcc-max-microamp = <600000>;
vccq2-max-microamp = <600000>;
qcom,vddp-ref-clk-supply = <&pm8998_l2>;
qcom,vddp-ref-clk-max-microamp = <100>;
status = "ok";
};
&sdhc_2 {
vdd-supply = <&pm8998_l21>;
qcom,vdd-voltage-level = <2950000 2960000>;
qcom,vdd-current-level = <200 800000>;
vdd-io-supply = <&pm8998_l13>;
qcom,vdd-io-voltage-level = <1808000 2960000>;
qcom,vdd-io-current-level = <200 22000>;
pinctrl-names = "active", "sleep", "ds_400KHz",
"ds_50MHz", "ds_100MHz", "ds_200MHz";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &storage_cd>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &storage_cd>;
pinctrl-2 = <&sdc2_clk_ds_400KHz
&sdc2_cmd_ds_400KHz &sdc2_data_ds_400KHz>;
pinctrl-3 = <&sdc2_clk_ds_50MHz
&sdc2_cmd_ds_50MHz &sdc2_data_ds_50MHz>;
pinctrl-4 = <&sdc2_clk_ds_100MHz
&sdc2_cmd_ds_100MHz &sdc2_data_ds_100MHz>;
pinctrl-5 = <&sdc2_clk_ds_200MHz
&sdc2_cmd_ds_200MHz &sdc2_data_ds_200MHz>;
cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
status = "ok";
};
&pmi8998_switch1 {
pinctrl-names = "led_enable", "led_disable";
pinctrl-0 = <&flash_led3_front_en>;
pinctrl-1 = <&flash_led3_front_dis>;
};
&pmi8998_switch2 {
pinctrl-names = "led_enable", "led_disable";
pinctrl-0 = <&flash_led3_iris_en>;
pinctrl-1 = <&flash_led3_iris_dis>;
};
&vendor {
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
vbus-gpio = <&pmi8998_gpios 8 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb2_vbus_det_default>;
};
};
&adsp_mem {
size = <0 0x12c00000>;
};
&qupv3_se9_2uart {
status = "ok";
};
&qupv3_se8_spi {
status = "ok";
};
&qupv3_se10_i2c {
status = "ok";
};
&qupv3_se6_4uart {
status = "ok";
};
&usb1 {
status = "okay";
extcon = <&extcon_usb1>;
};
&qusb_phy1 {
status = "okay";
};
&ext_5v_boost {
status = "ok";
};
&usb_qmp_phy {
status = "okay";
};
&pm8998_vadc {
chan@83 {
label = "vph_pwr";
reg = <0x83>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <1>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
chan@85 {
label = "vcoin";
reg = <0x85>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <1>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
chan@4c {
label = "xo_therm";
reg = <0x4c>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <4>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
chan@4d {
label = "msm_therm";
reg = <0x4d>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
chan@4f {
label = "pa_therm1";
reg = <0x4f>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
chan@51 {
label = "quiet_therm";
reg = <0x51>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
};
&pm8998_adc_tm {
chan@83 {
label = "vph_pwr";
reg = <0x83>;
qcom,pre-div-channel-scaling = <1>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,btm-channel-number = <0x60>;
};
chan@4c {
label = "xo_therm";
reg = <0x4c>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <4>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x68>;
qcom,thermal-node;
};
chan@4d {
label = "msm_therm";
reg = <0x4d>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x70>;
qcom,thermal-node;
};
chan@4f {
label = "pa_therm1";
reg = <0x4f>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x78>;
qcom,thermal-node;
};
chan@51 {
label = "quiet_therm";
reg = <0x51>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x80>;
qcom,thermal-node;
};
};
&thermal_zones {
xo-therm-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8998_adc_tm 0x4c>;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
msm-therm-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8998_adc_tm 0x4d>;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
pa-therm1-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8998_adc_tm 0x4f>;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
quiet-therm-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8998_adc_tm 0x51>;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
&wil6210 {
status = "ok";
};