[MIPS] TRACE_IRQFLAGS_SUPPORT support.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/include/asm-mips/irqflags.h b/include/asm-mips/irqflags.h
new file mode 100644
index 0000000..43ca09a
--- /dev/null
+++ b/include/asm-mips/irqflags.h
@@ -0,0 +1,225 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/hazards.h>
+
+__asm__ (
+ " .macro raw_local_irq_enable \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n"
+ " ori $1, 0x400 \n"
+ " xori $1, 0x400 \n"
+ " mtc0 $1, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ " ei \n"
+#else
+ " mfc0 $1,$12 \n"
+ " ori $1,0x1f \n"
+ " xori $1,0x1e \n"
+ " mtc0 $1,$12 \n"
+#endif
+ " irq_enable_hazard \n"
+ " .set pop \n"
+ " .endm");
+
+static inline void raw_local_irq_enable(void)
+{
+ __asm__ __volatile__(
+ "raw_local_irq_enable"
+ : /* no outputs */
+ : /* no inputs */
+ : "memory");
+}
+
+/*
+ * For cli() we have to insert nops to make sure that the new value
+ * has actually arrived in the status register before the end of this
+ * macro.
+ * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
+ * no nops at all.
+ */
+/*
+ * For TX49, operating only IE bit is not enough.
+ *
+ * If mfc0 $12 follows store and the mfc0 is last instruction of a
+ * page and fetching the next instruction causes TLB miss, the result
+ * of the mfc0 might wrongly contain EXL bit.
+ *
+ * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
+ *
+ * Workaround: mask EXL bit of the result or place a nop before mfc0.
+ */
+__asm__ (
+ " .macro raw_local_irq_disable\n"
+ " .set push \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 $1, $2, 1 \n"
+ " ori $1, 0x400 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ " di \n"
+#else
+ " mfc0 $1,$12 \n"
+ " ori $1,0x1f \n"
+ " xori $1,0x1f \n"
+ " .set noreorder \n"
+ " mtc0 $1,$12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+static inline void raw_local_irq_disable(void)
+{
+ __asm__ __volatile__(
+ "raw_local_irq_disable"
+ : /* no outputs */
+ : /* no inputs */
+ : "memory");
+}
+
+__asm__ (
+ " .macro raw_local_save_flags flags \n"
+ " .set push \n"
+ " .set reorder \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 \\flags, $2, 1 \n"
+#else
+ " mfc0 \\flags, $12 \n"
+#endif
+ " .set pop \n"
+ " .endm \n");
+
+#define raw_local_save_flags(x) \
+__asm__ __volatile__( \
+ "raw_local_save_flags %0" \
+ : "=r" (x))
+
+__asm__ (
+ " .macro raw_local_irq_save result \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 \\result, $2, 1 \n"
+ " ori $1, \\result, 0x400 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $2, 1 \n"
+ " andi \\result, \\result, 0x400 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ " di \\result \n"
+ " andi \\result, 1 \n"
+#else
+ " mfc0 \\result, $12 \n"
+ " ori $1, \\result, 0x1f \n"
+ " xori $1, 0x1f \n"
+ " .set noreorder \n"
+ " mtc0 $1, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+#define raw_local_irq_save(x) \
+__asm__ __volatile__( \
+ "raw_local_irq_save\t%0" \
+ : "=r" (x) \
+ : /* no inputs */ \
+ : "memory")
+
+__asm__ (
+ " .macro raw_local_irq_restore flags \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ "mfc0 $1, $2, 1 \n"
+ "andi \\flags, 0x400 \n"
+ "ori $1, 0x400 \n"
+ "xori $1, 0x400 \n"
+ "or \\flags, $1 \n"
+ "mtc0 \\flags, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+ /*
+ * Slow, but doesn't suffer from a relativly unlikely race
+ * condition we're having since days 1.
+ */
+ " beqz \\flags, 1f \n"
+ " di \n"
+ " ei \n"
+ "1: \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ /*
+ * Fast, dangerous. Life is fun, life is good.
+ */
+ " mfc0 $1, $12 \n"
+ " ins $1, \\flags, 0, 1 \n"
+ " mtc0 $1, $12 \n"
+#else
+ " mfc0 $1, $12 \n"
+ " andi \\flags, 1 \n"
+ " ori $1, 0x1f \n"
+ " xori $1, 0x1f \n"
+ " or \\flags, $1 \n"
+ " mtc0 \\flags, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+#define raw_local_irq_restore(flags) \
+do { \
+ unsigned long __tmp1; \
+ \
+ __asm__ __volatile__( \
+ "raw_local_irq_restore\t%0" \
+ : "=r" (__tmp1) \
+ : "0" (flags) \
+ : "memory"); \
+} while(0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
+ */
+ return flags & 0x400;
+#else
+ return !(flags & 1);
+#endif
+}
+
+#endif
+
+/*
+ * Do the CPU's IRQ-state tracing from assembly code.
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS
+# define TRACE_IRQS_ON \
+ jal trace_hardirqs_on
+# define TRACE_IRQS_OFF \
+ jal trace_hardirqs_off
+#else
+# define TRACE_IRQS_ON
+# define TRACE_IRQS_OFF
+#endif
+
+#endif /* _ASM_IRQFLAGS_H */