pch_dma: Support I2S for ML7213 IOH
Support I2S device for ML7213 IOH
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index 4e46672..2edcc9c 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -77,10 +77,10 @@
u32 dma_ctl0;
u32 dma_ctl1;
u32 dma_ctl2;
- u32 reserved1;
+ u32 dma_ctl3;
u32 dma_sts0;
u32 dma_sts1;
- u32 reserved2;
+ u32 dma_sts2;
u32 reserved3;
struct pch_dma_desc_regs desc[MAX_CHAN_NR];
};
@@ -130,6 +130,7 @@
#define PCH_DMA_CTL0 0x00
#define PCH_DMA_CTL1 0x04
#define PCH_DMA_CTL2 0x08
+#define PCH_DMA_CTL3 0x0C
#define PCH_DMA_STS0 0x10
#define PCH_DMA_STS1 0x14
@@ -202,16 +203,30 @@
struct pch_dma *pd = to_pd(chan->device);
u32 val;
- val = dma_readl(pd, CTL0);
+ if (chan->chan_id < 8) {
+ val = dma_readl(pd, CTL0);
- if (pd_chan->dir == DMA_TO_DEVICE)
- val |= 0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id +
- DMA_CTL0_DIR_SHIFT_BITS);
- else
- val &= ~(0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id +
- DMA_CTL0_DIR_SHIFT_BITS));
+ if (pd_chan->dir == DMA_TO_DEVICE)
+ val |= 0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id +
+ DMA_CTL0_DIR_SHIFT_BITS);
+ else
+ val &= ~(0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id +
+ DMA_CTL0_DIR_SHIFT_BITS));
- dma_writel(pd, CTL0, val);
+ dma_writel(pd, CTL0, val);
+ } else {
+ int ch = chan->chan_id - 8; /* ch8-->0 ch9-->1 ... ch11->3 */
+ val = dma_readl(pd, CTL3);
+
+ if (pd_chan->dir == DMA_TO_DEVICE)
+ val |= 0x1 << (DMA_CTL0_BITS_PER_CH * ch +
+ DMA_CTL0_DIR_SHIFT_BITS);
+ else
+ val &= ~(0x1 << (DMA_CTL0_BITS_PER_CH * ch +
+ DMA_CTL0_DIR_SHIFT_BITS));
+
+ dma_writel(pd, CTL3, val);
+ }
dev_dbg(chan2dev(chan), "pdc_set_dir: chan %d -> %x\n",
chan->chan_id, val);
@@ -222,13 +237,26 @@
struct pch_dma *pd = to_pd(chan->device);
u32 val;
- val = dma_readl(pd, CTL0);
+ if (chan->chan_id < 8) {
+ val = dma_readl(pd, CTL0);
- val &= ~(DMA_CTL0_MODE_MASK_BITS <<
- (DMA_CTL0_BITS_PER_CH * chan->chan_id));
- val |= mode << (DMA_CTL0_BITS_PER_CH * chan->chan_id);
+ val &= ~(DMA_CTL0_MODE_MASK_BITS <<
+ (DMA_CTL0_BITS_PER_CH * chan->chan_id));
+ val |= mode << (DMA_CTL0_BITS_PER_CH * chan->chan_id);
- dma_writel(pd, CTL0, val);
+ dma_writel(pd, CTL0, val);
+ } else {
+ int ch = chan->chan_id - 8; /* ch8-->0 ch9-->1 ... ch11->3 */
+
+ val = dma_readl(pd, CTL3);
+
+ val &= ~(DMA_CTL0_MODE_MASK_BITS <<
+ (DMA_CTL0_BITS_PER_CH * ch));
+ val |= mode << (DMA_CTL0_BITS_PER_CH * ch);
+
+ dma_writel(pd, CTL3, val);
+
+ }
dev_dbg(chan2dev(chan), "pdc_set_mode: chan %d -> %x\n",
chan->chan_id, val);
@@ -701,6 +729,7 @@
pd->regs.dma_ctl0 = dma_readl(pd, CTL0);
pd->regs.dma_ctl1 = dma_readl(pd, CTL1);
pd->regs.dma_ctl2 = dma_readl(pd, CTL2);
+ pd->regs.dma_ctl3 = dma_readl(pd, CTL3);
list_for_each_entry_safe(chan, _c, &pd->dma.channels, device_node) {
pd_chan = to_pd_chan(chan);
@@ -723,6 +752,7 @@
dma_writel(pd, CTL0, pd->regs.dma_ctl0);
dma_writel(pd, CTL1, pd->regs.dma_ctl1);
dma_writel(pd, CTL2, pd->regs.dma_ctl2);
+ dma_writel(pd, CTL3, pd->regs.dma_ctl3);
list_for_each_entry_safe(chan, _c, &pd->dma.channels, device_node) {
pd_chan = to_pd_chan(chan);
@@ -925,6 +955,7 @@
#define PCI_DEVICE_ID_ML7213_DMA1_8CH 0x8026
#define PCI_DEVICE_ID_ML7213_DMA2_8CH 0x802B
#define PCI_DEVICE_ID_ML7213_DMA3_4CH 0x8034
+#define PCI_DEVICE_ID_ML7213_DMA4_12CH 0x8032
static const struct pci_device_id pch_dma_id_table[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 },
@@ -932,6 +963,7 @@
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA1_8CH), 8}, /* UART Video */
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA2_8CH), 8}, /* PCMIF SPI */
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA3_4CH), 4}, /* FPGA */
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA4_12CH), 12}, /* I2S */
{ 0, },
};