msm: add gpiomux api for gpio multiplex & configuration.
Add the 'gpiomux' api, which addresses the following shortcomings
of existing tlmm api:
- gpio power-collapse, which is managed by a peripheral processor on
other targets, must be managed by the application processor on the 8x60.
- The enable/disable flag of the legacy gpio_tlmm_config api
is not applicable on the 8x60, and causes confusion.
- The gpio 'direction' bits are meaningless for all func_sel
configurations except for generic-gpio mode (func_sel 0), in which
case the gpio_direction_* functions should be used. Having these
bits in the tlmm api leads to confusion and misuse of the gpiolib
api, and they have been removed in gpiomux.
- The functional api of the legacy system ran contrary to the typical
use-case, which is a single massive configuration at boot. Rather
than forcing hundreds of 'config' function calls, the new api
allows data to be configured with a single table.
gpiomux_get and gpiomux_put are meant to be called automatically
when gpio_request and gpio_free are called, giving automatic
gpiomux/tlmm control to those drivers/lines with simple
power profiles - in the simplest cases, an entry in the gpiomux table
and the correct usage of gpiolib is all that is required to get proper
gpio power control.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
diff --git a/arch/arm/mach-msm/gpiomux-v1.h b/arch/arm/mach-msm/gpiomux-v1.h
new file mode 100644
index 0000000..71d86fe
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-v1.h
@@ -0,0 +1,67 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
+#define __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define GPIOMUX_NGPIOS 182
+#elif defined(CONFIG_ARCH_QSD8X50)
+#define GPIOMUX_NGPIOS 165
+#else
+#define GPIOMUX_NGPIOS 133
+#endif
+
+typedef u32 gpiomux_config_t;
+
+enum {
+ GPIOMUX_DRV_2MA = 0UL << 17,
+ GPIOMUX_DRV_4MA = 1UL << 17,
+ GPIOMUX_DRV_6MA = 2UL << 17,
+ GPIOMUX_DRV_8MA = 3UL << 17,
+ GPIOMUX_DRV_10MA = 4UL << 17,
+ GPIOMUX_DRV_12MA = 5UL << 17,
+ GPIOMUX_DRV_14MA = 6UL << 17,
+ GPIOMUX_DRV_16MA = 7UL << 17,
+};
+
+enum {
+ GPIOMUX_FUNC_GPIO = 0UL,
+ GPIOMUX_FUNC_1 = 1UL,
+ GPIOMUX_FUNC_2 = 2UL,
+ GPIOMUX_FUNC_3 = 3UL,
+ GPIOMUX_FUNC_4 = 4UL,
+ GPIOMUX_FUNC_5 = 5UL,
+ GPIOMUX_FUNC_6 = 6UL,
+ GPIOMUX_FUNC_7 = 7UL,
+ GPIOMUX_FUNC_8 = 8UL,
+ GPIOMUX_FUNC_9 = 9UL,
+ GPIOMUX_FUNC_A = 10UL,
+ GPIOMUX_FUNC_B = 11UL,
+ GPIOMUX_FUNC_C = 12UL,
+ GPIOMUX_FUNC_D = 13UL,
+ GPIOMUX_FUNC_E = 14UL,
+ GPIOMUX_FUNC_F = 15UL,
+};
+
+enum {
+ GPIOMUX_PULL_NONE = 0UL << 15,
+ GPIOMUX_PULL_DOWN = 1UL << 15,
+ GPIOMUX_PULL_KEEPER = 2UL << 15,
+ GPIOMUX_PULL_UP = 3UL << 15,
+};
+
+#endif