sh: se7343: Move CPLD IRQs to irqdomain and generic irq chip.
Follows the se7722 change, see there for more information.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 525b9e3..1a28004 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -81,6 +81,8 @@
config SH_7343_SOLUTION_ENGINE
bool "SolutionEngine7343"
select SOLUTION_ENGINE
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
depends on CPU_SUBTYPE_SH7343
help
Select 7343 SolutionEngine if configuring for a Hitachi
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
index fd45ffc..7646bf0 100644
--- a/arch/sh/boards/mach-se/7343/irq.c
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -1,54 +1,109 @@
/*
- * linux/arch/sh/boards/se/7343/irq.c
+ * Hitachi UL SolutionEngine 7343 FPGA IRQ Support.
*
* Copyright (C) 2008 Yoshihiro Shimoda
+ * Copyright (C) 2012 Paul Mundt
*
- * Based on linux/arch/sh/boards/se/7722/irq.c
+ * Based on linux/arch/sh/boards/se/7343/irq.c
* Copyright (C) 2007 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#define DRV_NAME "SE7343-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#define irq_reg_readl ioread16
+#define irq_reg_writel iowrite16
+
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
#include <linux/io.h>
+#include <asm/sizes.h>
#include <mach-se/mach/se7343.h>
-unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, };
+#define PA_CPLD_BASE_ADDR 0x11400000
+#define PA_CPLD_ST_REG 0x08 /* CPLD Interrupt status register */
+#define PA_CPLD_IMSK_REG 0x0a /* CPLD Interrupt mask register */
-static void disable_se7343_irq(struct irq_data *data)
-{
- unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
- __raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
-}
-
-static void enable_se7343_irq(struct irq_data *data)
-{
- unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
- __raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
-}
-
-static struct irq_chip se7343_irq_chip __read_mostly = {
- .name = "SE7343-FPGA",
- .irq_mask = disable_se7343_irq,
- .irq_unmask = enable_se7343_irq,
-};
+static void __iomem *se7343_irq_regs;
+struct irq_domain *se7343_irq_domain;
static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- unsigned short intv = __raw_readw(PA_CPLD_ST);
- unsigned int ext_irq = 0;
+ struct irq_data *data = irq_get_irq_data(irq);
+ struct irq_chip *chip = irq_data_get_irq_chip(data);
+ unsigned long mask;
+ int bit;
- intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
+ chip->irq_mask_ack(data);
- for (; intv; intv >>= 1, ext_irq++) {
- if (!(intv & 1))
- continue;
+ mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG);
- generic_handle_irq(se7343_fpga_irq[ext_irq]);
+ for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR)
+ generic_handle_irq(irq_linear_revmap(se7343_irq_domain, bit));
+
+ chip->irq_unmask(data);
+}
+
+static void __init se7343_domain_init(void)
+{
+ int i;
+
+ se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR,
+ &irq_domain_simple_ops, NULL);
+ if (unlikely(!se7343_irq_domain)) {
+ printk("Failed to get IRQ domain\n");
+ return;
}
+
+ for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
+ int irq = irq_create_mapping(se7343_irq_domain, i);
+
+ if (unlikely(irq == 0)) {
+ printk("Failed to allocate IRQ %d\n", i);
+ return;
+ }
+ }
+}
+
+static void __init se7343_gc_init(void)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ unsigned int irq_base;
+
+ irq_base = irq_linear_revmap(se7343_irq_domain, 0);
+
+ gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs,
+ handle_level_irq);
+ if (unlikely(!gc))
+ return;
+
+ ct = gc->chip_types;
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+
+ ct->regs.mask = PA_CPLD_IMSK_REG;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR),
+ IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+
+ irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux);
+ irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+ irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux);
+ irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+ irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux);
+ irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+ irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux);
+ irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
}
/*
@@ -56,31 +111,19 @@
*/
void __init init_7343se_IRQ(void)
{
- int i, irq;
-
- __raw_writew(0, PA_CPLD_IMSK); /* disable all irqs */
- __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
-
- for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
- irq = create_irq();
- if (irq < 0)
- return;
- se7343_fpga_irq[i] = irq;
-
- irq_set_chip_and_handler_name(se7343_fpga_irq[i],
- &se7343_irq_chip,
- handle_level_irq,
- "level");
-
- irq_set_chip_data(se7343_fpga_irq[i], (void *)i);
+ se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16);
+ if (unlikely(!se7343_irq_regs)) {
+ pr_err("Failed to remap CPLD\n");
+ return;
}
- irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
- irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
- irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
- irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
+ /*
+ * All FPGA IRQs disabled by default
+ */
+ iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG);
+
+ __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
+
+ se7343_domain_init();
+ se7343_gc_init();
}
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
index d2370af..8ce4f2a 100644
--- a/arch/sh/boards/mach-se/7343/setup.c
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -5,6 +5,7 @@
#include <linux/serial_reg.h>
#include <linux/usb/isp116x.h>
#include <linux/delay.h>
+#include <linux/irqdomain.h>
#include <asm/machvec.h>
#include <mach-se/mach/se7343.h>
#include <asm/heartbeat.h>
@@ -145,11 +146,12 @@
static int __init sh7343se_devices_setup(void)
{
/* Wire-up dynamic vectors */
- serial_platform_data[0].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTA];
- serial_platform_data[1].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTB];
-
+ serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain,
+ SE7343_FPGA_IRQ_UARTA);
+ serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain,
+ SE7343_FPGA_IRQ_UARTB);
usb_resources[2].start = usb_resources[2].end =
- se7343_fpga_irq[SE7343_FPGA_IRQ_USB];
+ irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB);
return platform_add_devices(sh7343se_platform_devices,
ARRAY_SIZE(sh7343se_platform_devices));