| /* |
| * pxa-ssp.c -- ALSA Soc Audio Layer |
| * |
| * Copyright 2005,2008 Wolfson Microelectronics PLC. |
| * Author: Liam Girdwood |
| * Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * TODO: |
| * o Test network mode for > 16bit sample size |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/pxa2xx_ssp.h> |
| |
| #include <asm/irq.h> |
| |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/initval.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/pxa2xx-lib.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/dma.h> |
| #include <mach/audio.h> |
| |
| #include "../../arm/pxa2xx-pcm.h" |
| #include "pxa-ssp.h" |
| |
| /* |
| * SSP audio private data |
| */ |
| struct ssp_priv { |
| struct ssp_device *ssp; |
| unsigned int sysclk; |
| int dai_fmt; |
| #ifdef CONFIG_PM |
| uint32_t cr0; |
| uint32_t cr1; |
| uint32_t to; |
| uint32_t psp; |
| #endif |
| }; |
| |
| static void dump_registers(struct ssp_device *ssp) |
| { |
| dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n", |
| pxa_ssp_read_reg(ssp, SSCR0), pxa_ssp_read_reg(ssp, SSCR1), |
| pxa_ssp_read_reg(ssp, SSTO)); |
| |
| dev_dbg(&ssp->pdev->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n", |
| pxa_ssp_read_reg(ssp, SSPSP), pxa_ssp_read_reg(ssp, SSSR), |
| pxa_ssp_read_reg(ssp, SSACD)); |
| } |
| |
| static void pxa_ssp_enable(struct ssp_device *ssp) |
| { |
| uint32_t sscr0; |
| |
| sscr0 = __raw_readl(ssp->mmio_base + SSCR0) | SSCR0_SSE; |
| __raw_writel(sscr0, ssp->mmio_base + SSCR0); |
| } |
| |
| static void pxa_ssp_disable(struct ssp_device *ssp) |
| { |
| uint32_t sscr0; |
| |
| sscr0 = __raw_readl(ssp->mmio_base + SSCR0) & ~SSCR0_SSE; |
| __raw_writel(sscr0, ssp->mmio_base + SSCR0); |
| } |
| |
| struct pxa2xx_pcm_dma_data { |
| struct pxa2xx_pcm_dma_params params; |
| char name[20]; |
| }; |
| |
| static struct pxa2xx_pcm_dma_params * |
| pxa_ssp_get_dma_params(struct ssp_device *ssp, int width4, int out) |
| { |
| struct pxa2xx_pcm_dma_data *dma; |
| |
| dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL); |
| if (dma == NULL) |
| return NULL; |
| |
| snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id, |
| width4 ? "32-bit" : "16-bit", out ? "out" : "in"); |
| |
| dma->params.name = dma->name; |
| dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx); |
| dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) : |
| (DCMD_INCTRGADDR | DCMD_FLOWSRC)) | |
| (width4 ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16; |
| dma->params.dev_addr = ssp->phys_base + SSDR; |
| |
| return &dma->params; |
| } |
| |
| static int pxa_ssp_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct ssp_device *ssp = priv->ssp; |
| int ret = 0; |
| |
| if (!cpu_dai->active) { |
| clk_enable(ssp->clk); |
| pxa_ssp_disable(ssp); |
| } |
| |
| kfree(snd_soc_dai_get_dma_data(cpu_dai, substream)); |
| snd_soc_dai_set_dma_data(cpu_dai, substream, NULL); |
| |
| return ret; |
| } |
| |
| static void pxa_ssp_shutdown(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct ssp_device *ssp = priv->ssp; |
| |
| if (!cpu_dai->active) { |
| pxa_ssp_disable(ssp); |
| clk_disable(ssp->clk); |
| } |
| |
| kfree(snd_soc_dai_get_dma_data(cpu_dai, substream)); |
| snd_soc_dai_set_dma_data(cpu_dai, substream, NULL); |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int pxa_ssp_suspend(struct snd_soc_dai *cpu_dai) |
| { |
| struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct ssp_device *ssp = priv->ssp; |
| |
| if (!cpu_dai->active) |
| clk_enable(ssp->clk); |
| |
| priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0); |
| priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1); |
| priv->to = __raw_readl(ssp->mmio_base + SSTO); |
| priv->psp = __raw_readl(ssp->mmio_base + SSPSP); |
| |
| pxa_ssp_disable(ssp); |
| clk_disable(ssp->clk); |
| return 0; |
| } |
| |
| static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai) |
| { |
| struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct ssp_device *ssp = priv->ssp; |
| uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE; |
| |
| clk_enable(ssp->clk); |
| |
| __raw_writel(sssr, ssp->mmio_base + SSSR); |
| __raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0); |
| __raw_writel(priv->cr1, ssp->mmio_base + SSCR1); |
| __raw_writel(priv->to, ssp->mmio_base + SSTO); |
| __raw_writel(priv->psp, ssp->mmio_base + SSPSP); |
| |
| if (cpu_dai->active) |
| pxa_ssp_enable(ssp); |
| else |
| clk_disable(ssp->clk); |
| |
| return 0; |
| } |
| |
| #else |
| #define pxa_ssp_suspend NULL |
| #define pxa_ssp_resume NULL |
| #endif |
| |
| /** |
| * ssp_set_clkdiv - set SSP clock divider |
| * @div: serial clock rate divider |
| */ |
| static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div) |
| { |
| u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); |
| |
| if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) { |
| sscr0 &= ~0x0000ff00; |
| sscr0 |= ((div - 2)/2) << 8; /* 2..512 */ |
| } else { |
| sscr0 &= ~0x000fff00; |
| sscr0 |= (div - 1) << 8; /* 1..4096 */ |
| } |
| pxa_ssp_write_reg(ssp, SSCR0, sscr0); |
| } |
| |
| /** |
| * pxa_ssp_get_clkdiv - get SSP clock divider |
| */ |
| static u32 pxa_ssp_get_scr(struct ssp_device *ssp) |
| { |
| u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); |
| u32 div; |
| |
| if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) |
| div = ((sscr0 >> 8) & 0xff) * 2 + 2; |
| else |
| div = ((sscr0 >> 8) & 0xfff) + 1; |
| return div; |
| } |
| |
| /* |
| * Set the SSP ports SYSCLK. |
| */ |
| static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct ssp_device *ssp = priv->ssp; |
| int val; |
| |
| u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & |
| ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); |
| |
| dev_dbg(&ssp->pdev->dev, |
| "pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n", |
| cpu_dai->id, clk_id, freq); |
| |
| switch (clk_id) { |
| case PXA_SSP_CLK_NET_PLL: |
| sscr0 |= SSCR0_MOD; |
| break; |
| case PXA_SSP_CLK_PLL: |
| /* Internal PLL is fixed */ |
| if (cpu_is_pxa25x()) |
| priv->sysclk = 1843200; |
| else |
| priv->sysclk = 13000000; |
| break; |
| case PXA_SSP_CLK_EXT: |
| priv->sysclk = freq; |
| sscr0 |= SSCR0_ECS; |
| break; |
| case PXA_SSP_CLK_NET: |
| priv->sysclk = freq; |
| sscr0 |= SSCR0_NCS | SSCR0_MOD; |
| break; |
| case PXA_SSP_CLK_AUDIO: |
| priv->sysclk = 0; |
| pxa_ssp_set_scr(ssp, 1); |
| sscr0 |= SSCR0_ACS; |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| /* The SSP clock must be disabled when changing SSP clock mode |
| * on PXA2xx. On PXA3xx it must be enabled when doing so. */ |
| if (!cpu_is_pxa3xx()) |
| clk_disable(ssp->clk); |
| val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0; |
| pxa_ssp_write_reg(ssp, SSCR0, val); |
| if (!cpu_is_pxa3xx()) |
| clk_enable(ssp->clk); |
| |
| return 0; |
| } |
| |
| /* |
| * Set the SSP clock dividers. |
| */ |
| static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, |
| int div_id, int div) |
| { |
| struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct ssp_device *ssp = priv->ssp; |
| int val; |
| |
| switch (div_id) { |
| case PXA_SSP_AUDIO_DIV_ACDS: |
| val = (pxa_ssp_read_reg(ssp, SSACD) & ~0x7) | SSACD_ACDS(div); |
| pxa_ssp_write_reg(ssp, SSACD, val); |
| break; |
| case PXA_SSP_AUDIO_DIV_SCDB: |
| val = pxa_ssp_read_reg(ssp, SSACD); |
| val &= ~SSACD_SCDB; |
| #if defined(CONFIG_PXA3xx) |
| if (cpu_is_pxa3xx()) |
| val &= ~SSACD_SCDX8; |
| #endif |
| switch (div) { |
| case PXA_SSP_CLK_SCDB_1: |
| val |= SSACD_SCDB; |
| break; |
| case PXA_SSP_CLK_SCDB_4: |
| break; |
| #if defined(CONFIG_PXA3xx) |
| case PXA_SSP_CLK_SCDB_8: |
| if (cpu_is_pxa3xx()) |
| val |= SSACD_SCDX8; |
| else |
| return -EINVAL; |
| break; |
| #endif |
| default: |
| return -EINVAL; |
| } |
| pxa_ssp_write_reg(ssp, SSACD, val); |
| break; |
| case PXA_SSP_DIV_SCR: |
| pxa_ssp_set_scr(ssp, div); |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Configure the PLL frequency pxa27x and (afaik - pxa320 only) |
| */ |
| static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, |
| int source, unsigned int freq_in, unsigned int freq_out) |
| { |
| struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct ssp_device *ssp = priv->ssp; |
| u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70; |
| |
| #if defined(CONFIG_PXA3xx) |
| if (cpu_is_pxa3xx()) |
| pxa_ssp_write_reg(ssp, SSACDD, 0); |
| #endif |
| |
| switch (freq_out) { |
| case 5622000: |
| break; |
| case 11345000: |
| ssacd |= (0x1 << 4); |
| break; |
| case 12235000: |
| ssacd |= (0x2 << 4); |
| break; |
| case 14857000: |
| ssacd |= (0x3 << 4); |
| break; |
| case 32842000: |
| ssacd |= (0x4 << 4); |
| break; |
| case 48000000: |
| ssacd |= (0x5 << 4); |
| break; |
| case 0: |
| /* Disable */ |
| break; |
| |
| default: |
| #ifdef CONFIG_PXA3xx |
| /* PXA3xx has a clock ditherer which can be used to generate |
| * a wider range of frequencies - calculate a value for it. |
| */ |
| if (cpu_is_pxa3xx()) { |
| u32 val; |
| u64 tmp = 19968; |
| tmp *= 1000000; |
| do_div(tmp, freq_out); |
| val = tmp; |
| |
| val = (val << 16) | 64; |
| pxa_ssp_write_reg(ssp, SSACDD, val); |
| |
| ssacd |= (0x6 << 4); |
| |
| dev_dbg(&ssp->pdev->dev, |
| "Using SSACDD %x to supply %uHz\n", |
| val, freq_out); |
| break; |
| } |
| #endif |
| |
| return -EINVAL; |
| } |
| |
| pxa_ssp_write_reg(ssp, SSACD, ssacd); |
| |
| return 0; |
| } |
| |
| /* |
| * Set the active slots in TDM/Network mode |
| */ |
| static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, |
| unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) |
| { |
| struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct ssp_device *ssp = priv->ssp; |
| u32 sscr0; |
| |
| sscr0 = pxa_ssp_read_reg(ssp, SSCR0); |
| sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS); |
| |
| /* set slot width */ |
| if (slot_width > 16) |
| sscr0 |= SSCR0_EDSS | SSCR0_DataSize(slot_width - 16); |
| else |
| sscr0 |= SSCR0_DataSize(slot_width); |
| |
| if (slots > 1) { |
| /* enable network mode */ |
| sscr0 |= SSCR0_MOD; |
| |
| /* set number of active slots */ |
| sscr0 |= SSCR0_SlotsPerFrm(slots); |
| |
| /* set active slot mask */ |
| pxa_ssp_write_reg(ssp, SSTSA, tx_mask); |
| pxa_ssp_write_reg(ssp, SSRSA, rx_mask); |
| } |
| pxa_ssp_write_reg(ssp, SSCR0, sscr0); |
| |
| return 0; |
| } |
| |
| /* |
| * Tristate the SSP DAI lines |
| */ |
| static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai, |
| int tristate) |
| { |
| struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct ssp_device *ssp = priv->ssp; |
| u32 sscr1; |
| |
| sscr1 = pxa_ssp_read_reg(ssp, SSCR1); |
| if (tristate) |
| sscr1 &= ~SSCR1_TTE; |
| else |
| sscr1 |= SSCR1_TTE; |
| pxa_ssp_write_reg(ssp, SSCR1, sscr1); |
| |
| return 0; |
| } |
| |
| /* |
| * Set up the SSP DAI format. |
| * The SSP Port must be inactive before calling this function as the |
| * physical interface format is changed. |
| */ |
| static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, |
| unsigned int fmt) |
| { |
| struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct ssp_device *ssp = priv->ssp; |
| u32 sscr0, sscr1, sspsp, scfr; |
| |
| /* check if we need to change anything at all */ |
| if (priv->dai_fmt == fmt) |
| return 0; |
| |
| /* we can only change the settings if the port is not in use */ |
| if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { |
| dev_err(&ssp->pdev->dev, |
| "can't change hardware dai format: stream is in use"); |
| return -EINVAL; |
| } |
| |
| /* reset port settings */ |
| sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & |
| ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); |
| sscr1 = SSCR1_RxTresh(8) | SSCR1_TxTresh(7); |
| sspsp = 0; |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR; |
| break; |
| case SND_SOC_DAIFMT_CBM_CFS: |
| sscr1 |= SSCR1_SCLKDIR | SSCR1_SCFR; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFS: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| sspsp |= SSPSP_SFRMP; |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| break; |
| case SND_SOC_DAIFMT_IB_IF: |
| sspsp |= SSPSP_SCMODE(2); |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| sscr0 |= SSCR0_PSP; |
| sscr1 |= SSCR1_RWOT | SSCR1_TRAIL; |
| /* See hw_params() */ |
| break; |
| |
| case SND_SOC_DAIFMT_DSP_A: |
| sspsp |= SSPSP_FSRT; |
| case SND_SOC_DAIFMT_DSP_B: |
| sscr0 |= SSCR0_MOD | SSCR0_PSP; |
| sscr1 |= SSCR1_TRAIL | SSCR1_RWOT; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| pxa_ssp_write_reg(ssp, SSCR0, sscr0); |
| pxa_ssp_write_reg(ssp, SSCR1, sscr1); |
| pxa_ssp_write_reg(ssp, SSPSP, sspsp); |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| case SND_SOC_DAIFMT_CBM_CFS: |
| scfr = pxa_ssp_read_reg(ssp, SSCR1) | SSCR1_SCFR; |
| pxa_ssp_write_reg(ssp, SSCR1, scfr); |
| |
| while (pxa_ssp_read_reg(ssp, SSSR) & SSSR_BSY) |
| cpu_relax(); |
| break; |
| } |
| |
| dump_registers(ssp); |
| |
| /* Since we are configuring the timings for the format by hand |
| * we have to defer some things until hw_params() where we |
| * know parameters like the sample size. |
| */ |
| priv->dai_fmt = fmt; |
| |
| return 0; |
| } |
| |
| /* |
| * Set the SSP audio DMA parameters and sample size. |
| * Can be called multiple times by oss emulation. |
| */ |
| static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct ssp_device *ssp = priv->ssp; |
| int chn = params_channels(params); |
| u32 sscr0; |
| u32 sspsp; |
| int width = snd_pcm_format_physical_width(params_format(params)); |
| int ttsa = pxa_ssp_read_reg(ssp, SSTSA) & 0xf; |
| struct pxa2xx_pcm_dma_params *dma_data; |
| |
| dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); |
| |
| /* generate correct DMA params */ |
| kfree(dma_data); |
| |
| /* Network mode with one active slot (ttsa == 1) can be used |
| * to force 16-bit frame width on the wire (for S16_LE), even |
| * with two channels. Use 16-bit DMA transfers for this case. |
| */ |
| dma_data = pxa_ssp_get_dma_params(ssp, |
| ((chn == 2) && (ttsa != 1)) || (width == 32), |
| substream->stream == SNDRV_PCM_STREAM_PLAYBACK); |
| |
| snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data); |
| |
| /* we can only change the settings if the port is not in use */ |
| if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) |
| return 0; |
| |
| /* clear selected SSP bits */ |
| sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS); |
| |
| /* bit size */ |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S16_LE: |
| #ifdef CONFIG_PXA3xx |
| if (cpu_is_pxa3xx()) |
| sscr0 |= SSCR0_FPCKE; |
| #endif |
| sscr0 |= SSCR0_DataSize(16); |
| break; |
| case SNDRV_PCM_FORMAT_S24_LE: |
| sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8)); |
| break; |
| case SNDRV_PCM_FORMAT_S32_LE: |
| sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16)); |
| break; |
| } |
| pxa_ssp_write_reg(ssp, SSCR0, sscr0); |
| |
| switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| sspsp = pxa_ssp_read_reg(ssp, SSPSP); |
| |
| if ((pxa_ssp_get_scr(ssp) == 4) && (width == 16)) { |
| /* This is a special case where the bitclk is 64fs |
| * and we're not dealing with 2*32 bits of audio |
| * samples. |
| * |
| * The SSP values used for that are all found out by |
| * trying and failing a lot; some of the registers |
| * needed for that mode are only available on PXA3xx. |
| */ |
| |
| #ifdef CONFIG_PXA3xx |
| if (!cpu_is_pxa3xx()) |
| return -EINVAL; |
| |
| sspsp |= SSPSP_SFRMWDTH(width * 2); |
| sspsp |= SSPSP_SFRMDLY(width * 4); |
| sspsp |= SSPSP_EDMYSTOP(3); |
| sspsp |= SSPSP_DMYSTOP(3); |
| sspsp |= SSPSP_DMYSTRT(1); |
| #else |
| return -EINVAL; |
| #endif |
| } else { |
| /* The frame width is the width the LRCLK is |
| * asserted for; the delay is expressed in |
| * half cycle units. We need the extra cycle |
| * because the data starts clocking out one BCLK |
| * after LRCLK changes polarity. |
| */ |
| sspsp |= SSPSP_SFRMWDTH(width + 1); |
| sspsp |= SSPSP_SFRMDLY((width + 1) * 2); |
| sspsp |= SSPSP_DMYSTRT(1); |
| } |
| |
| pxa_ssp_write_reg(ssp, SSPSP, sspsp); |
| break; |
| default: |
| break; |
| } |
| |
| /* When we use a network mode, we always require TDM slots |
| * - complain loudly and fail if they've not been set up yet. |
| */ |
| if ((sscr0 & SSCR0_MOD) && !ttsa) { |
| dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n"); |
| return -EINVAL; |
| } |
| |
| dump_registers(ssp); |
| |
| return 0; |
| } |
| |
| static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd, |
| struct snd_soc_dai *cpu_dai) |
| { |
| int ret = 0; |
| struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct ssp_device *ssp = priv->ssp; |
| int val; |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_RESUME: |
| pxa_ssp_enable(ssp); |
| break; |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| val = pxa_ssp_read_reg(ssp, SSCR1); |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| val |= SSCR1_TSRE; |
| else |
| val |= SSCR1_RSRE; |
| pxa_ssp_write_reg(ssp, SSCR1, val); |
| val = pxa_ssp_read_reg(ssp, SSSR); |
| pxa_ssp_write_reg(ssp, SSSR, val); |
| break; |
| case SNDRV_PCM_TRIGGER_START: |
| val = pxa_ssp_read_reg(ssp, SSCR1); |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| val |= SSCR1_TSRE; |
| else |
| val |= SSCR1_RSRE; |
| pxa_ssp_write_reg(ssp, SSCR1, val); |
| pxa_ssp_enable(ssp); |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| val = pxa_ssp_read_reg(ssp, SSCR1); |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| val &= ~SSCR1_TSRE; |
| else |
| val &= ~SSCR1_RSRE; |
| pxa_ssp_write_reg(ssp, SSCR1, val); |
| break; |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| pxa_ssp_disable(ssp); |
| break; |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| val = pxa_ssp_read_reg(ssp, SSCR1); |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| val &= ~SSCR1_TSRE; |
| else |
| val &= ~SSCR1_RSRE; |
| pxa_ssp_write_reg(ssp, SSCR1, val); |
| break; |
| |
| default: |
| ret = -EINVAL; |
| } |
| |
| dump_registers(ssp); |
| |
| return ret; |
| } |
| |
| static int pxa_ssp_probe(struct snd_soc_dai *dai) |
| { |
| struct ssp_priv *priv; |
| int ret; |
| |
| priv = kzalloc(sizeof(struct ssp_priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->ssp = pxa_ssp_request(dai->id + 1, "SoC audio"); |
| if (priv->ssp == NULL) { |
| ret = -ENODEV; |
| goto err_priv; |
| } |
| |
| priv->dai_fmt = (unsigned int) -1; |
| snd_soc_dai_set_drvdata(dai, priv); |
| |
| return 0; |
| |
| err_priv: |
| kfree(priv); |
| return ret; |
| } |
| |
| static int pxa_ssp_remove(struct snd_soc_dai *dai) |
| { |
| struct ssp_priv *priv = snd_soc_dai_get_drvdata(dai); |
| |
| pxa_ssp_free(priv->ssp); |
| kfree(priv); |
| return 0; |
| } |
| |
| #define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ |
| SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \ |
| SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \ |
| SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) |
| |
| #define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ |
| SNDRV_PCM_FMTBIT_S24_LE | \ |
| SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static const struct snd_soc_dai_ops pxa_ssp_dai_ops = { |
| .startup = pxa_ssp_startup, |
| .shutdown = pxa_ssp_shutdown, |
| .trigger = pxa_ssp_trigger, |
| .hw_params = pxa_ssp_hw_params, |
| .set_sysclk = pxa_ssp_set_dai_sysclk, |
| .set_clkdiv = pxa_ssp_set_dai_clkdiv, |
| .set_pll = pxa_ssp_set_dai_pll, |
| .set_fmt = pxa_ssp_set_dai_fmt, |
| .set_tdm_slot = pxa_ssp_set_dai_tdm_slot, |
| .set_tristate = pxa_ssp_set_dai_tristate, |
| }; |
| |
| static struct snd_soc_dai_driver pxa_ssp_dai = { |
| .probe = pxa_ssp_probe, |
| .remove = pxa_ssp_remove, |
| .suspend = pxa_ssp_suspend, |
| .resume = pxa_ssp_resume, |
| .playback = { |
| .channels_min = 1, |
| .channels_max = 8, |
| .rates = PXA_SSP_RATES, |
| .formats = PXA_SSP_FORMATS, |
| }, |
| .capture = { |
| .channels_min = 1, |
| .channels_max = 8, |
| .rates = PXA_SSP_RATES, |
| .formats = PXA_SSP_FORMATS, |
| }, |
| .ops = &pxa_ssp_dai_ops, |
| }; |
| |
| static __devinit int asoc_ssp_probe(struct platform_device *pdev) |
| { |
| return snd_soc_register_dai(&pdev->dev, &pxa_ssp_dai); |
| } |
| |
| static int __devexit asoc_ssp_remove(struct platform_device *pdev) |
| { |
| snd_soc_unregister_dai(&pdev->dev); |
| return 0; |
| } |
| |
| static struct platform_driver asoc_ssp_driver = { |
| .driver = { |
| .name = "pxa-ssp-dai", |
| .owner = THIS_MODULE, |
| }, |
| |
| .probe = asoc_ssp_probe, |
| .remove = __devexit_p(asoc_ssp_remove), |
| }; |
| |
| module_platform_driver(asoc_ssp_driver); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface"); |
| MODULE_LICENSE("GPL"); |