ARM: dts: msm: fix support for DSC panels on SDM845
Truly 2.5K panel in the DSC mode works on a single port configuration
using the DSI1 control path whereas the Sharp 4K DSC panel works on a
dual port configuration using DSI0 and DSI1 control path. Fix these
configuration details for SDM845 CDP, MTP and QRD boards
Change-Id: I83d930b0ee92b1added702a6e5ca6c72b4510a0f
Signed-off-by: Vara Reddy <varar@codeaurora.org>
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cdp.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cdp.dtsi
index 7038d48..0f44fba 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cdp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cdp.dtsi
@@ -237,7 +237,7 @@
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <4095>;
- qcom,mdss-dsi-panel-mode-gpio-state = "dual_port";
+ qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
qcom,panel-mode-gpio = <&tlmm 52 0>;
qcom,platform-reset-gpio = <&tlmm 6 0>;
};
@@ -247,7 +247,29 @@
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <4095>;
- qcom,mdss-dsi-panel-mode-gpio-state = "dual_port";
+ qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
+ qcom,panel-mode-gpio = <&tlmm 52 0>;
+ qcom,platform-reset-gpio = <&tlmm 6 0>;
+ qcom,platform-te-gpio = <&tlmm 10 0>;
+};
+
+&dsi_nt35597_truly_dsc_cmd {
+ qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
+ qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
+ qcom,mdss-dsi-bl-min-level = <1>;
+ qcom,mdss-dsi-bl-max-level = <4095>;
+ qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
+ qcom,panel-mode-gpio = <&tlmm 52 0>;
+ qcom,platform-reset-gpio = <&tlmm 6 0>;
+ qcom,platform-te-gpio = <&tlmm 10 0>;
+};
+
+&dsi_nt35597_truly_dsc_video {
+ qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
+ qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
+ qcom,mdss-dsi-bl-min-level = <1>;
+ qcom,mdss-dsi-bl-max-level = <4095>;
+ qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
qcom,panel-mode-gpio = <&tlmm 52 0>;
qcom,platform-reset-gpio = <&tlmm 6 0>;
};