MIPS: BMIPS: Add SATA/PHY nodes for bcm7346
Add AHCI and PHY device nodes to MIPS-based BCM7346 set-top box
platform.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Dragan Stancevic <dragan.stancevic@gmail.com>
Cc: linux-ide@vger.kernel.org
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11378/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index 0a19270..d4bf52c 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -314,5 +314,47 @@
interrupts = <76>;
status = "disabled";
};
+
+ sata: sata@181000 {
+ compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ brcm,broken-ncq;
+ brcm,broken-phy;
+ status = "disabled";
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy1>;
+ };
+ };
+
+ sata_phy: sata-phy@1800000 {
+ compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+ reg = <0x180100 0x0eff>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ sata_phy1: sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
};
};
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
index a5b6365..d3d2881 100644
--- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -84,3 +84,11 @@
&ohci3 {
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};