ath9k_hw: Fix radio programming for AR9550
For AR9550, program the synth value based on the ref. clock.
The logic for AR9550 is similar to AR9330, but keep the code
separate since changes for AR9330 are required - which would be
done later.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index ce19c09..0c4c5a6 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -68,7 +68,7 @@
static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
{
u16 bMode, fracMode = 0, aModeRefSel = 0;
- u32 freq, channelSel = 0, reg32 = 0;
+ u32 freq, chan_frac, div, channelSel = 0, reg32 = 0;
struct chan_centers centers;
int loadSynthChannel;
@@ -77,9 +77,6 @@
if (freq < 4800) { /* 2 GHz, fractional mode */
if (AR_SREV_9330(ah)) {
- u32 chan_frac;
- u32 div;
-
if (ah->is_clk_25mhz)
div = 75;
else
@@ -89,34 +86,40 @@
chan_frac = (((freq * 4) % div) * 0x20000) / div;
channelSel = (channelSel << 17) | chan_frac;
} else if (AR_SREV_9485(ah) || AR_SREV_9565(ah)) {
- u32 chan_frac;
-
/*
- * freq_ref = 40 / (refdiva >> amoderefsel); where refdiva=1 and amoderefsel=0
+ * freq_ref = 40 / (refdiva >> amoderefsel);
+ * where refdiva=1 and amoderefsel=0
* ndiv = ((chan_mhz * 4) / 3) / freq_ref;
* chansel = int(ndiv), chanfrac = (ndiv - chansel) * 0x20000
*/
channelSel = (freq * 4) / 120;
chan_frac = (((freq * 4) % 120) * 0x20000) / 120;
channelSel = (channelSel << 17) | chan_frac;
- } else if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) {
+ } else if (AR_SREV_9340(ah)) {
if (ah->is_clk_25mhz) {
- u32 chan_frac;
-
channelSel = (freq * 2) / 75;
chan_frac = (((freq * 2) % 75) * 0x20000) / 75;
channelSel = (channelSel << 17) | chan_frac;
- } else
+ } else {
channelSel = CHANSEL_2G(freq) >> 1;
- } else
+ }
+ } else if (AR_SREV_9550(ah)) {
+ if (ah->is_clk_25mhz)
+ div = 75;
+ else
+ div = 120;
+
+ channelSel = (freq * 4) / div;
+ chan_frac = (((freq * 4) % div) * 0x20000) / div;
+ channelSel = (channelSel << 17) | chan_frac;
+ } else {
channelSel = CHANSEL_2G(freq);
+ }
/* Set to 2G mode */
bMode = 1;
} else {
if ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) &&
ah->is_clk_25mhz) {
- u32 chan_frac;
-
channelSel = freq / 75;
chan_frac = ((freq % 75) * 0x20000) / 75;
channelSel = (channelSel << 17) | chan_frac;