ARM: pxa: rename NR_BUILTIN_GPIO
NR_BUILTIN_GPIO is both defined in arch-pxa and arch-mmp. Now replace it
with PXA_NR_BUILTIN_GPIO and MMP_NR_BUILTIN_GPIO.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index c9f8617..f3c3493 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -98,7 +98,7 @@
CORGI_SCP_MIC_BIAS )
#define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
-#define CORGI_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO)
+#define CORGI_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
#define CORGI_GPIO_LED_GREEN (CORGI_SCOOP_GPIO_BASE + 0)
#define CORGI_GPIO_SWA (CORGI_SCOOP_GPIO_BASE + 1) /* Hinge Switch A */
#define CORGI_GPIO_SWB (CORGI_SCOOP_GPIO_BASE + 2) /* Hinge Switch B */
diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
index 41b4c93..134b3bc 100644
--- a/arch/arm/mach-pxa/include/mach/gpio-pxa.h
+++ b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
@@ -93,8 +93,6 @@
#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
-#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
-
#define gpio_to_bank(gpio) ((gpio) >> 5)
#ifdef CONFIG_CPU_PXA26x
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 5cf0137..561cdbf 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -28,5 +28,4 @@
/* The defines for the driver are needed for the accelerated accessors */
#include "gpio-pxa.h"
-#include <plat/gpio.h>
#endif
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
index 3740844..8bc0291 100644
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -15,7 +15,7 @@
#include <linux/gpio.h>
#include <linux/mfd/asic3.h>
-#define HX4700_ASIC3_GPIO_BASE NR_BUILTIN_GPIO
+#define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO
#define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
#define HX4700_NR_IRQS (IRQ_BOARD_START + 70)
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index b83d8ff..32975ad 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -88,7 +88,7 @@
#define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */
#define PXA_GPIO_IRQ_BASE PXA_IRQ(96)
-#define PXA_GPIO_IRQ_NUM (192)
+#define PXA_NR_BUILTIN_GPIO (192)
#define PXA_GPIO_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
/*
@@ -98,7 +98,7 @@
* By default, no board IRQ is reserved. It should be finished in
* custom board since sparse IRQ is already enabled.
*/
-#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_NR_BUILTIN_GPIO)
#define NR_IRQS (IRQ_BOARD_START)
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index b6238cb..e20ac1b 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -7,7 +7,7 @@
#define LITTLETON_GPIO_LCD_CS (17)
-#define EXT0_GPIO_BASE (NR_BUILTIN_GPIO)
+#define EXT0_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
#define EXT0_GPIO(x) (EXT0_GPIO_BASE + (x))
#define LITTLETON_NR_IRQS (IRQ_BOARD_START + 8)
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 7cbfc5d..ba6a6e1 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -78,7 +78,7 @@
* CPLD EGPIOs
*/
-#define MAGICIAN_EGPIO_BASE NR_BUILTIN_GPIO
+#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO
#define MAGICIAN_EGPIO(reg,bit) \
(MAGICIAN_EGPIO_BASE + 8*reg + bit)
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 763fdc4..f32ff75 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -71,7 +71,7 @@
#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
#define POODLE_SCOOP_IO_OUT ( 0 )
-#define POODLE_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO)
+#define POODLE_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
#define POODLE_GPIO_CHARGE_ON (POODLE_SCOOP_GPIO_BASE + 0)
#define POODLE_GPIO_CP401 (POODLE_SCOOP_GPIO_BASE + 2)
#define POODLE_GPIO_VPEN (POODLE_SCOOP_GPIO_BASE + 7)
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index 273381a..0bfe650 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -108,7 +108,7 @@
#define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
#define SPITZ_SCP_SUS_SET 0
-#define SPITZ_SCP_GPIO_BASE (NR_BUILTIN_GPIO)
+#define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
#define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0)
#define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1)
#define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2)
@@ -140,7 +140,7 @@
SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
#define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
-#define SPITZ_SCP2_GPIO_BASE (NR_BUILTIN_GPIO + 12)
+#define SPITZ_SCP2_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
#define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0)
#define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1)
#define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2)
@@ -152,7 +152,7 @@
#define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8)
/* Akita IO Expander GPIOs */
-#define AKITA_IOEXP_GPIO_BASE (NR_BUILTIN_GPIO + 12)
+#define AKITA_IOEXP_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
#define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0)
#define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1)
#define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2)
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 4653539..2bb0e86 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -24,7 +24,7 @@
/*
* SCOOP2 internal GPIOs
*/
-#define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO
+#define TOSA_SCOOP_GPIO_BASE PXA_NR_BUILTIN_GPIO
#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11
#define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1)
#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2)
@@ -42,7 +42,7 @@
/*
* SCOOP2 jacket GPIOs
*/
-#define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12)
+#define TOSA_SCOOP_JC_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0)
#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1)
#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2)
@@ -59,7 +59,7 @@
/*
* TC6393XB GPIOs
*/
-#define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12)
+#define TOSA_TC6393XB_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 2 * 12)
#define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0)
#define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6d38c65..abab4e2 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -378,7 +378,7 @@
#include <linux/i2c/pca953x.h>
static struct pca953x_platform_data pca9536_data = {
- .gpio_base = NR_BUILTIN_GPIO,
+ .gpio_base = PXA_NR_BUILTIN_GPIO,
};
static int gpio_bus_switch = -EINVAL;
@@ -406,9 +406,9 @@
int ret;
if (gpio_bus_switch < 0) {
- ret = gpio_request(NR_BUILTIN_GPIO, "camera");
+ ret = gpio_request(PXA_NR_BUILTIN_GPIO, "camera");
if (!ret) {
- gpio_bus_switch = NR_BUILTIN_GPIO;
+ gpio_bus_switch = PXA_NR_BUILTIN_GPIO;
gpio_direction_output(gpio_bus_switch, 0);
}
}