diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index b16a4fc..3e71dbd 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -21,6 +21,7 @@
 	select PINCTRL_DB8500
 	select PINCTRL_DB8540
 	select PINCTRL_AB8500
+	select PINCTRL_AB8505
 	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
 
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 367556f..e7db9fa 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -37,6 +37,10 @@
 	bool "AB8500 pin controller driver"
 	depends on PINCTRL_ABX500 && ARCH_U8500
 
+config PINCTRL_AB8505
+	bool "AB8505 pin controller driver"
+	depends on PINCTRL_ABX500 && ARCH_U8500
+
 config PINCTRL_AT91
 	bool "AT91 pinctrl driver"
 	depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index aad5c93..2cc0115 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -11,6 +11,7 @@
 obj-$(CONFIG_GENERIC_PINCONF)	+= pinconf-generic.o
 obj-$(CONFIG_PINCTRL_ABX500)	+= pinctrl-abx500.o
 obj-$(CONFIG_PINCTRL_AB8500)	+= pinctrl-ab8500.o
+obj-$(CONFIG_PINCTRL_AB8505)	+= pinctrl-ab8505.o
 obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
 obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
 obj-$(CONFIG_PINCTRL_IMX)	+= pinctrl-imx.o
diff --git a/drivers/pinctrl/pinctrl-ab8505.c b/drivers/pinctrl/pinctrl-ab8505.c
new file mode 100644
index 0000000..40dc3e1
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ab8505.c
@@ -0,0 +1,380 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include "pinctrl-abx500.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define ABX500_GPIO(offset)	(offset)
+
+#define AB8505_PIN_N4		ABX500_GPIO(1)
+#define AB8505_PIN_R5		ABX500_GPIO(2)
+#define AB8505_PIN_P5		ABX500_GPIO(3)
+/* hole */
+#define AB8505_PIN_B16		ABX500_GPIO(10)
+#define AB8505_PIN_B17		ABX500_GPIO(11)
+/* hole */
+#define AB8505_PIN_D17		ABX500_GPIO(13)
+#define AB8505_PIN_C16		ABX500_GPIO(14)
+/* hole */
+#define AB8505_PIN_P2		ABX500_GPIO(17)
+#define AB8505_PIN_N3		ABX500_GPIO(18)
+#define AB8505_PIN_T1		ABX500_GPIO(19)
+#define AB8505_PIN_P3		ABX500_GPIO(20)
+/* hole */
+#define AB8505_PIN_H14		ABX500_GPIO(34)
+/* hole */
+#define AB8505_PIN_J15		ABX500_GPIO(40)
+#define AB8505_PIN_J14		ABX500_GPIO(41)
+/* hole */
+#define AB8505_PIN_L4		ABX500_GPIO(50)
+/* hole */
+#define AB8505_PIN_D16		ABX500_GPIO(52)
+#define AB8505_PIN_D15		ABX500_GPIO(53)
+
+/* indicates the higher GPIO number */
+#define AB8505_GPIO_MAX_NUMBER	53
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc ab8505_pins[] = {
+	PINCTRL_PIN(AB8505_PIN_N4, "GPIO1_N4"),
+	PINCTRL_PIN(AB8505_PIN_R5, "GPIO2_R5"),
+	PINCTRL_PIN(AB8505_PIN_P5, "GPIO3_P5"),
+/* hole */
+	PINCTRL_PIN(AB8505_PIN_B16, "GPIO10_B16"),
+	PINCTRL_PIN(AB8505_PIN_B17, "GPIO11_B17"),
+/* hole */
+	PINCTRL_PIN(AB8505_PIN_D17, "GPIO13_D17"),
+	PINCTRL_PIN(AB8505_PIN_C16, "GPIO14_C16"),
+/* hole */
+	PINCTRL_PIN(AB8505_PIN_P2, "GPIO17_P2"),
+	PINCTRL_PIN(AB8505_PIN_N3, "GPIO18_N3"),
+	PINCTRL_PIN(AB8505_PIN_T1, "GPIO19_T1"),
+	PINCTRL_PIN(AB8505_PIN_P3, "GPIO20_P3"),
+/* hole */
+	PINCTRL_PIN(AB8505_PIN_H14, "GPIO34_H14"),
+/* hole */
+	PINCTRL_PIN(AB8505_PIN_J15, "GPIO40_J15"),
+	PINCTRL_PIN(AB8505_PIN_J14, "GPIO41_J14"),
+/* hole */
+	PINCTRL_PIN(AB8505_PIN_L4, "GPIO50_L4"),
+/* hole */
+	PINCTRL_PIN(AB8505_PIN_D16, "GPIO52_D16"),
+	PINCTRL_PIN(AB8505_PIN_D15, "GPIO53_D15"),
+};
+
+/*
+ * Maps local GPIO offsets to local pin numbers
+ */
+static const struct abx500_pinrange ab8505_pinranges[] = {
+	ABX500_PINRANGE(1, 3, ABX500_ALT_A),
+	ABX500_PINRANGE(10, 2, ABX500_DEFAULT),
+	ABX500_PINRANGE(13, 1, ABX500_DEFAULT),
+	ABX500_PINRANGE(14, 1, ABX500_ALT_A),
+	ABX500_PINRANGE(17, 4, ABX500_ALT_A),
+	ABX500_PINRANGE(34, 1, ABX500_ALT_A),
+	ABX500_PINRANGE(40, 2, ABX500_ALT_A),
+	ABX500_PINRANGE(50, 1, ABX500_DEFAULT),
+	ABX500_PINRANGE(52, 2, ABX500_ALT_A),
+};
+
+/*
+ * Read the pin group names like this:
+ * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* default column */
+static const unsigned sysclkreq2_d_1_pins[] = { AB8505_PIN_N4 };
+static const unsigned sysclkreq3_d_1_pins[] = { AB8505_PIN_R5 };
+static const unsigned sysclkreq4_d_1_pins[] = { AB8505_PIN_P5 };
+static const unsigned gpio10_d_1_pins[] = { AB8505_PIN_B16 };
+static const unsigned gpio11_d_1_pins[] = { AB8505_PIN_B17 };
+static const unsigned gpio13_d_1_pins[] = { AB8505_PIN_D17 };
+static const unsigned pwmout1_d_1_pins[] = { AB8505_PIN_C16 };
+/* audio data interface 2*/
+static const unsigned adi2_d_1_pins[] = { AB8505_PIN_P2, AB8505_PIN_N3,
+					AB8505_PIN_T1, AB8505_PIN_P3 };
+static const unsigned extcpena_d_1_pins[] = { AB8505_PIN_H14 };
+/* modem SDA/SCL */
+static const unsigned modsclsda_d_1_pins[] = { AB8505_PIN_J15, AB8505_PIN_J14 };
+static const unsigned gpio50_d_1_pins[] = { AB8505_PIN_L4 };
+static const unsigned resethw_d_1_pins[] = { AB8505_PIN_D16 };
+static const unsigned service_d_1_pins[] = { AB8505_PIN_D15 };
+
+/* Altfunction A column */
+static const unsigned gpio1_a_1_pins[] = { AB8505_PIN_N4 };
+static const unsigned gpio2_a_1_pins[] = { AB8505_PIN_R5 };
+static const unsigned gpio3_a_1_pins[] = { AB8505_PIN_P5 };
+static const unsigned hiqclkena_a_1_pins[] = { AB8505_PIN_B16 };
+static const unsigned pdmclk_a_1_pins[] = { AB8505_PIN_B17 };
+static const unsigned uarttxdata_a_1_pins[] = { AB8505_PIN_D17 };
+static const unsigned gpio14_a_1_pins[] = { AB8505_PIN_C16 };
+static const unsigned gpio17_a_1_pins[] = { AB8505_PIN_P2 };
+static const unsigned gpio18_a_1_pins[] = { AB8505_PIN_N3 };
+static const unsigned gpio19_a_1_pins[] = { AB8505_PIN_T1 };
+static const unsigned gpio20_a_1_pins[] = { AB8505_PIN_P3 };
+static const unsigned gpio34_a_1_pins[] = { AB8505_PIN_H14 };
+static const unsigned gpio40_a_1_pins[] = { AB8505_PIN_J15 };
+static const unsigned gpio41_a_1_pins[] = { AB8505_PIN_J14 };
+static const unsigned uartrxdata_a_1_pins[] = { AB8505_PIN_J14 };
+static const unsigned gpio50_a_1_pins[] = { AB8505_PIN_L4 };
+static const unsigned gpio52_a_1_pins[] = { AB8505_PIN_D16 };
+static const unsigned gpio53_a_1_pins[] = { AB8505_PIN_D15 };
+
+/* Altfunction B colum */
+static const unsigned pdmdata_b_1_pins[] = { AB8505_PIN_B16 };
+static const unsigned extvibrapwm1_b_1_pins[] = { AB8505_PIN_D17 };
+static const unsigned extvibrapwm2_b_1_pins[] = { AB8505_PIN_L4 };
+
+/* Altfunction C column */
+static const unsigned usbvdat_c_1_pins[] = { AB8505_PIN_D17 };
+
+#define AB8505_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins,		\
+			.npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct abx500_pingroup ab8505_groups[] = {
+	AB8505_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
+	AB8505_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
+	AB8505_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
+	AB8505_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT),
+	AB8505_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT),
+	AB8505_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT),
+	AB8505_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
+	AB8505_PIN_GROUP(adi2_d_1, ABX500_DEFAULT),
+	AB8505_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT),
+	AB8505_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT),
+	AB8505_PIN_GROUP(gpio50_d_1, ABX500_DEFAULT),
+	AB8505_PIN_GROUP(resethw_d_1, ABX500_DEFAULT),
+	AB8505_PIN_GROUP(service_d_1, ABX500_DEFAULT),
+	AB8505_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(hiqclkena_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(pdmclk_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(uarttxdata_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(gpio34_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(uartrxdata_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(gpio52_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(gpio53_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B),
+	AB8505_PIN_GROUP(extvibrapwm1_b_1, ABX500_ALT_B),
+	AB8505_PIN_GROUP(extvibrapwm2_b_1, ABX500_ALT_B),
+	AB8505_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C),
+};
+
+/* We use this macro to define the groups applicable to a function */
+#define AB8505_FUNC_GROUPS(a, b...)	   \
+static const char * const a##_groups[] = { b };
+
+AB8505_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
+		"sysclkreq4_d_1");
+AB8505_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1",
+		"gpio10_d_1", "gpio11_d_1", "gpio13_d_1", "gpio14_a_1",
+		"gpio17_a_1", "gpio18_a_1", "gpio19_a_1", "gpio20_a_1",
+		"gpio34_a_1", "gpio40_a_1", "gpio41_a_1", "gpio50_d_1",
+		"gpio52_a_1", "gpio53_a_1");
+AB8505_FUNC_GROUPS(pwmout, "pwmout1_d_1");
+AB8505_FUNC_GROUPS(adi2, "adi2_d_1");
+AB8505_FUNC_GROUPS(extcpena, "extcpena_d_1");
+AB8505_FUNC_GROUPS(modsclsda, "modsclsda_d_1");
+AB8505_FUNC_GROUPS(resethw, "resethw_d_1");
+AB8505_FUNC_GROUPS(service, "service_d_1");
+AB8505_FUNC_GROUPS(hiqclkena, "hiqclkena_a_1");
+AB8505_FUNC_GROUPS(pdm, "pdmclk_a_1", "pdmdata_b_1");
+AB8505_FUNC_GROUPS(uartdata, "uarttxdata_a_1", "uartrxdata_a_1");
+AB8505_FUNC_GROUPS(extvibra, "extvibrapwm1_b_1", "extvibrapwm2_b_1");
+AB8505_FUNC_GROUPS(usbvdat, "usbvdat_c_1");
+
+#define FUNCTION(fname)					\
+	{						\
+		.name = #fname,				\
+		.groups = fname##_groups,		\
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+static const struct abx500_function ab8505_functions[] = {
+	FUNCTION(sysclkreq),
+	FUNCTION(gpio),
+	FUNCTION(pwmout),
+	FUNCTION(adi2),
+	FUNCTION(extcpena),
+	FUNCTION(modsclsda),
+	FUNCTION(resethw),
+	FUNCTION(service),
+	FUNCTION(hiqclkena),
+	FUNCTION(pdm),
+	FUNCTION(uartdata),
+	FUNCTION(extvibra),
+	FUNCTION(extvibra),
+	FUNCTION(usbvdat),
+};
+
+/*
+ * this table translates what's is in the AB8505 specification regarding the
+ * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
+ * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
+ * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
+ *
+ * example :
+ *
+ *	ALTERNATE_FUNCTIONS(13,     4,      3,      4, 1, 0, 2),
+ *	means that pin AB8505_PIN_D18 (pin 13) supports 4 mux (default/ALT_A,
+ *	ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to
+ *	select the mux. ALTA, ALTB and ALTC val indicates values to write in
+ *	ALTERNATFUNC register. We need to specifies these values as SOC
+ *	designers didn't apply the same logic on how to select mux in the
+ *	ABx500 family.
+ *
+ *	As this pins supports at least ALT_B mux, default mux is
+ *	selected by writing 1 in GPIOSEL bit :
+ *
+ *		| GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3
+ *	default	|       1       |          0          |          0
+ *	alt_A	|       0       |          0          |          1
+ *	alt_B	|       0       |          0          |          0
+ *	alt_C	|       0       |          1          |          0
+ *
+ *	ALTERNATE_FUNCTIONS(1,      0, UNUSED, UNUSED),
+ *	means that pin AB9540_PIN_R4 (pin 1) supports 2 mux, so only GPIOSEL
+ *	register is used to select the mux. As this pins doesn't support at
+ *	least ALT_B mux, default mux is by writing 0 in GPIOSEL bit :
+ *
+ *		| GPIOSEL bit=0 | alternatfunc bit2=  | alternatfunc bit1=
+ *	default	|       0       |          0          |          0
+ *	alt_A	|       1       |          0          |          0
+ */
+
+struct alternate_functions ab8505_alternate_functions[AB8505_GPIO_MAX_NUMBER + 1] = {
+	ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
+	ALTERNATE_FUNCTIONS(1,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(2,      1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
+	ALTERNATE_FUNCTIONS(3,      2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
+	ALTERNATE_FUNCTIONS(4, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO4, bit 3 reserved */
+	ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5, bit 4 reserved */
+	ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6, bit 5 reserved */
+	ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7, bit 6 reserved */
+	ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8, bit 7 reserved */
+
+	ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9, bit 0 reserved */
+	ALTERNATE_FUNCTIONS(10,      1,      0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(11,      2, UNUSED, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 2 */
+	ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12, bit3 reseved */
+	ALTERNATE_FUNCTIONS(13,      4,      3,      4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
+	ALTERNATE_FUNCTIONS(14,      5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
+	ALTERNATE_FUNCTIONS(15, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 6 reserved */
+	ALTERNATE_FUNCTIONS(16, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 7 reserved  */
+	/*
+	 * pins 17 to 20 are special case, only bit 0 is used to select
+	 * alternate function for these 4 pins.
+	 * bits 1 to 3 are reserved
+	 */
+	ALTERNATE_FUNCTIONS(17,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(18,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(19,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(20,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(21, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO21, bit 4 reserved */
+	ALTERNATE_FUNCTIONS(22, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO22, bit 5 reserved */
+	ALTERNATE_FUNCTIONS(23, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO23, bit 6 reserved */
+	ALTERNATE_FUNCTIONS(24, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO24, bit 7 reserved */
+
+	ALTERNATE_FUNCTIONS(25, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO25, bit 0 reserved */
+	ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26, bit 1 reserved */
+	ALTERNATE_FUNCTIONS(27, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO27, bit 2 reserved */
+	ALTERNATE_FUNCTIONS(28, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO28, bit 3 reserved */
+	ALTERNATE_FUNCTIONS(29, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO29, bit 4 reserved */
+	ALTERNATE_FUNCTIONS(30, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO30, bit 5 reserved */
+	ALTERNATE_FUNCTIONS(31, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO31, bit 6 reserved */
+	ALTERNATE_FUNCTIONS(32, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO32, bit 7 reserved */
+
+	ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33, bit 0 reserved */
+	ALTERNATE_FUNCTIONS(34,      1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */
+	ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35, bit 2 reserved */
+	ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36, bit 2 reserved */
+	ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37, bit 2 reserved */
+	ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38, bit 2 reserved */
+	ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39, bit 2 reserved */
+	ALTERNATE_FUNCTIONS(40,      7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7*/
+
+	ALTERNATE_FUNCTIONS(41,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(42, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO42, bit 1 reserved */
+	ALTERNATE_FUNCTIONS(43, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO43, bit 2 reserved */
+	ALTERNATE_FUNCTIONS(44, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO44, bit 3 reserved */
+	ALTERNATE_FUNCTIONS(45, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO45, bit 4 reserved */
+	ALTERNATE_FUNCTIONS(46, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO46, bit 5 reserved */
+	ALTERNATE_FUNCTIONS(47, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO47, bit 6 reserved */
+	ALTERNATE_FUNCTIONS(48, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO48, bit 7 reserved */
+
+	ALTERNATE_FUNCTIONS(49, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */
+	ALTERNATE_FUNCTIONS(50,	     1,      2, UNUSED, 1, 0, 0), /* GPIO50, altA controlled by bit 1 */
+	ALTERNATE_FUNCTIONS(51, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */
+	ALTERNATE_FUNCTIONS(52,	     3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */
+	ALTERNATE_FUNCTIONS(53,	     4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */
+};
+
+/*
+ * For AB8505 Only some GPIOs are interrupt capable, and they are
+ * organized in discontiguous clusters:
+ *
+ *	GPIO10 to GPIO11
+ *	GPIO13
+ *	GPIO40 and GPIO41
+ *	GPIO50
+ *	GPIO52 to GPIO53
+ */
+struct abx500_gpio_irq_cluster ab8505_gpio_irq_cluster[] = {
+	GPIO_IRQ_CLUSTER(9, 10, 0), /* GPIO numbers start from 1 */
+	GPIO_IRQ_CLUSTER(12, 12, 0),
+	GPIO_IRQ_CLUSTER(39, 40, 0),
+	GPIO_IRQ_CLUSTER(49, 49, 0),
+	GPIO_IRQ_CLUSTER(51, 52, 0),
+};
+
+static struct abx500_pinctrl_soc_data ab8505_soc = {
+	.gpio_ranges = ab8505_pinranges,
+	.gpio_num_ranges = ARRAY_SIZE(ab8505_pinranges),
+	.pins = ab8505_pins,
+	.npins = ARRAY_SIZE(ab8505_pins),
+	.functions = ab8505_functions,
+	.nfunctions = ARRAY_SIZE(ab8505_functions),
+	.groups = ab8505_groups,
+	.ngroups = ARRAY_SIZE(ab8505_groups),
+	.alternate_functions = ab8505_alternate_functions,
+	.gpio_irq_cluster = ab8505_gpio_irq_cluster,
+	.ngpio_irq_cluster = ARRAY_SIZE(ab8505_gpio_irq_cluster),
+	.irq_gpio_rising_offset = AB8500_INT_GPIO6R,
+	.irq_gpio_falling_offset = AB8500_INT_GPIO6F,
+	.irq_gpio_factor = 1,
+};
+
+void
+abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc)
+{
+	*soc = &ab8505_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c
index 215dbb4..94f9381 100644
--- a/drivers/pinctrl/pinctrl-abx500.c
+++ b/drivers/pinctrl/pinctrl-abx500.c
@@ -1119,6 +1119,9 @@
 	case PINCTRL_AB8500:
 		abx500_pinctrl_ab8500_init(&pct->soc);
 		break;
+	case PINCTRL_AB8505:
+		abx500_pinctrl_ab8505_init(&pct->soc);
+		break;
 	default:
 		dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n",
 				(int) platid->driver_data);
diff --git a/drivers/pinctrl/pinctrl-abx500.h b/drivers/pinctrl/pinctrl-abx500.h
index a6c9332..5c5ac75 100644
--- a/drivers/pinctrl/pinctrl-abx500.h
+++ b/drivers/pinctrl/pinctrl-abx500.h
@@ -190,4 +190,17 @@
 
 #endif
 
+#ifdef CONFIG_PINCTRL_AB8505
+
+void abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
 #endif /* PINCTRL_PINCTRL_ABx500_H */