fm10k: add support for Rx offloads on one Geneve tunnel
Similar to how we handle VXLAN offload, enable support for a single
Geneve tunnel.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k.h b/drivers/net/ethernet/intel/fm10k/fm10k.h
index 209268a..67ff01a 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k.h
+++ b/drivers/net/ethernet/intel/fm10k/fm10k.h
@@ -335,6 +335,7 @@
/* UDP encapsulation port tracking information */
struct list_head vxlan_port;
+ struct list_head geneve_port;
#ifdef CONFIG_DEBUG_FS
struct dentry *dbg_intfc;
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
index 07c5a68..0562938 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
@@ -387,7 +387,7 @@
* fm10k_free_udp_port_info
* @interface: board private structure
*
- * This function frees the entire vxlan_port list
+ * This function frees both geneve_port and vxlan_port structures
**/
static void fm10k_free_udp_port_info(struct fm10k_intfc *interface)
{
@@ -403,6 +403,17 @@
struct fm10k_udp_port,
list);
}
+
+ /* flush all entries from geneve list */
+ port = list_first_entry_or_null(&interface->geneve_port,
+ struct fm10k_udp_port, list);
+ while (port) {
+ list_del(&port->list);
+ kfree(port);
+ port = list_first_entry_or_null(&interface->vxlan_port,
+ struct fm10k_udp_port,
+ list);
+ }
}
/**
@@ -427,6 +438,13 @@
fm10k_write_reg(hw, FM10K_TUNNEL_CFG,
(port ? ntohs(port->port) : 0) |
(ETH_P_TEB << FM10K_TUNNEL_CFG_NVGRE_SHIFT));
+
+ port = list_first_entry_or_null(&interface->geneve_port,
+ struct fm10k_udp_port, list);
+
+ /* restore Geneve tunnel configuration register */
+ fm10k_write_reg(hw, FM10K_TUNNEL_CFG_GENEVE,
+ (port ? ntohs(port->port) : 0));
}
static struct fm10k_udp_port *
@@ -472,8 +490,8 @@
* @ti: Tunnel endpoint information
*
* This function is called when a new UDP tunnel port has been added.
- * Currently we only support VXLAN and only one port will actually be
- * offloaded due to hardware restrictions.
+ * Due to hardware restrictions, only one port per type can be offloaded at
+ * once.
**/
static void fm10k_udp_tunnel_add(struct net_device *dev,
struct udp_tunnel_info *ti)
@@ -488,6 +506,9 @@
case UDP_TUNNEL_TYPE_VXLAN:
fm10k_insert_tunnel_port(&interface->vxlan_port, ti);
break;
+ case UDP_TUNNEL_TYPE_GENEVE:
+ fm10k_insert_tunnel_port(&interface->geneve_port, ti);
+ break;
default:
return;
}
@@ -517,6 +538,9 @@
case UDP_TUNNEL_TYPE_VXLAN:
port = fm10k_remove_tunnel_port(&interface->vxlan_port, ti);
break;
+ case UDP_TUNNEL_TYPE_GENEVE:
+ port = fm10k_remove_tunnel_port(&interface->geneve_port, ti);
+ break;
default:
return;
}
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
index 860fe04..0a20ca1 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
@@ -1835,8 +1835,9 @@
interface->tx_itr = FM10K_TX_ITR_DEFAULT;
interface->rx_itr = FM10K_ITR_ADAPTIVE | FM10K_RX_ITR_DEFAULT;
- /* initialize vxlan_port list */
+ /* initialize udp port lists */
INIT_LIST_HEAD(&interface->vxlan_port);
+ INIT_LIST_HEAD(&interface->geneve_port);
netdev_rss_key_fill(rss_key, sizeof(rss_key));
memcpy(interface->rssrk, rss_key, sizeof(rss_key));
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_type.h b/drivers/net/ethernet/intel/fm10k/fm10k_type.h
index f4e75c4..6bb16c1 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_type.h
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_type.h
@@ -154,6 +154,7 @@
#define FM10K_DGLORTDEC_INNERRSS_ENABLE 0x08000000
#define FM10K_TUNNEL_CFG 0x0040
#define FM10K_TUNNEL_CFG_NVGRE_SHIFT 16
+#define FM10K_TUNNEL_CFG_GENEVE 0x0041
#define FM10K_SWPRI_MAP(_n) ((_n) + 0x0050)
#define FM10K_SWPRI_MAX 16
#define FM10K_RSSRK(_n, _m) (((_n) * 0x10) + (_m) + 0x0800)