drm/i915: gen3 page flipping fixes
Gen3 chips have slightly different flip commands, and also contain a bit
that indicates whether a "flip pending" interrupt means the flip has
been queued or has been completed.
So implement support for the gen3 flip command, and make sure we use the
flip pending interrupt correctly depending on the value of ECOSKPD bit
0.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 84ce956..4d59710 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1408,6 +1408,10 @@
if (ret)
goto destroy_ringbuffer;
+ /* IIR "flip pending" bit means done if this bit is set */
+ if (IS_GEN3(dev) && (I915_READ(ECOSKPD) & ECO_FLIP_DONE))
+ dev_priv->flip_pending_is_done = true;
+
intel_modeset_init(dev);
ret = drm_irq_install(dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index f3f681f..21e217d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -595,6 +595,7 @@
struct drm_crtc *plane_to_crtc_mapping[2];
struct drm_crtc *pipe_to_crtc_mapping[2];
wait_queue_head_t pending_flip_queue;
+ bool flip_pending_is_done;
/* Reclocking support */
bool render_reclock_avail;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index e9710a7..70e1e4b 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -940,22 +940,30 @@
if (HAS_BSD(dev) && (iir & I915_BSD_USER_INTERRUPT))
DRM_WAKEUP(&dev_priv->bsd_ring.irq_queue);
- if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT)
+ if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT) {
intel_prepare_page_flip(dev, 0);
+ if (dev_priv->flip_pending_is_done)
+ intel_finish_page_flip_plane(dev, 0);
+ }
- if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT)
+ if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT) {
+ if (dev_priv->flip_pending_is_done)
+ intel_finish_page_flip_plane(dev, 1);
intel_prepare_page_flip(dev, 1);
+ }
if (pipea_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 0);
- intel_finish_page_flip(dev, 0);
+ if (!dev_priv->flip_pending_is_done)
+ intel_finish_page_flip(dev, 0);
}
if (pipeb_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 1);
- intel_finish_page_flip(dev, 1);
+ if (!dev_priv->flip_pending_is_done)
+ intel_finish_page_flip(dev, 1);
}
if ((pipea_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 64b0a3a..2cae38a 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -178,6 +178,7 @@
#define MI_OVERLAY_OFF (0x2<<21)
#define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
#define MI_DISPLAY_FLIP MI_INSTR(0x14, 2)
+#define MI_DISPLAY_FLIP_I915 MI_INSTR(0x14, 1)
#define MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
#define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1)
#define MI_MEM_VIRTUAL (1 << 22) /* 965+ only */
@@ -368,6 +369,9 @@
#define CM0_RC_OP_FLUSH_DISABLE (1<<0)
#define BB_ADDR 0x02140 /* 8 bytes */
#define GFX_FLSH_CNTL 0x02170 /* 915+ only */
+#define ECOSKPD 0x021d0
+#define ECO_GATING_CX_ONLY (1<<3)
+#define ECO_FLIP_DONE (1<<0)
/* GEN6 interrupt control */
#define GEN6_RENDER_HWSTAM 0x2098
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index dc65a1d..6db778a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4603,10 +4603,10 @@
kfree(work);
}
-void intel_finish_page_flip(struct drm_device *dev, int pipe)
+static void do_intel_finish_page_flip(struct drm_device *dev,
+ struct drm_crtc *crtc)
{
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_unpin_work *work;
struct drm_i915_gem_object *obj_priv;
@@ -4650,6 +4650,22 @@
schedule_work(&work->work);
}
+void intel_finish_page_flip(struct drm_device *dev, int pipe)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+
+ do_intel_finish_page_flip(dev, crtc);
+}
+
+void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
+
+ do_intel_finish_page_flip(dev, crtc);
+}
+
void intel_prepare_page_flip(struct drm_device *dev, int plane)
{
drm_i915_private_t *dev_priv = dev->dev_private;
@@ -4745,14 +4761,17 @@
;
BEGIN_LP_RING(4);
- OUT_RING(MI_DISPLAY_FLIP |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- OUT_RING(fb->pitch);
if (IS_I965G(dev)) {
+ OUT_RING(MI_DISPLAY_FLIP |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch);
OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode);
pipesrc = I915_READ(pipesrc_reg);
OUT_RING(pipesrc & 0x0fff0fff);
} else {
+ OUT_RING(MI_DISPLAY_FLIP_I915 |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch);
OUT_RING(obj_priv->gtt_offset);
OUT_RING(MI_NOOP);
}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index df931f7..72206f3 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -224,6 +224,7 @@
extern void intel_prepare_page_flip(struct drm_device *dev, int plane);
extern void intel_finish_page_flip(struct drm_device *dev, int pipe);
+extern void intel_finish_page_flip_plane(struct drm_device *dev, int plane);
extern void intel_setup_overlay(struct drm_device *dev);
extern void intel_cleanup_overlay(struct drm_device *dev);