ath9k: Cleanup Powersave flags
sc_flags has slowly become a kitchen sink over time.
Move powersave related flags to a separate variable.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 48bd5d5..974de20 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -144,10 +144,10 @@
goto unlock;
if (sc->ps_enabled &&
- !(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
- SC_OP_WAIT_FOR_CAB |
- SC_OP_WAIT_FOR_PSPOLL_DATA |
- SC_OP_WAIT_FOR_TX_ACK)))
+ !(sc->ps_flags & (PS_WAIT_FOR_BEACON |
+ PS_WAIT_FOR_CAB |
+ PS_WAIT_FOR_PSPOLL_DATA |
+ PS_WAIT_FOR_TX_ACK)))
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
unlock:
@@ -424,7 +424,7 @@
*/
ath_print(common, ATH_DBG_PS,
"TSFOOR - Sync with next Beacon\n");
- sc->sc_flags |= SC_OP_WAIT_FOR_BEACON | SC_OP_BEACON_SYNC;
+ sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
}
if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
@@ -525,7 +525,7 @@
* receive frames */
ath9k_setpower(sc, ATH9K_PM_AWAKE);
ath9k_hw_setrxabort(sc->sc_ah, 0);
- sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
+ sc->ps_flags |= PS_WAIT_FOR_BEACON;
}
chip_reset:
@@ -833,7 +833,7 @@
* on the receipt of the first Beacon frame (i.e.,
* after time sync with the AP).
*/
- sc->sc_flags |= SC_OP_BEACON_SYNC;
+ sc->ps_flags |= PS_BEACON_SYNC;
/* Configure the beacon */
ath_beacon_config(sc, vif);
@@ -1238,11 +1238,11 @@
if (ieee80211_is_pspoll(hdr->frame_control)) {
ath_print(common, ATH_DBG_PS,
"Sending PS-Poll to pick a buffered frame\n");
- sc->sc_flags |= SC_OP_WAIT_FOR_PSPOLL_DATA;
+ sc->ps_flags |= PS_WAIT_FOR_PSPOLL_DATA;
} else {
ath_print(common, ATH_DBG_PS,
"Wake up to complete TX\n");
- sc->sc_flags |= SC_OP_WAIT_FOR_TX_ACK;
+ sc->ps_flags |= PS_WAIT_FOR_TX_ACK;
}
/*
* The actual restore operation will happen only after
@@ -1538,7 +1538,7 @@
*/
if (changed & IEEE80211_CONF_CHANGE_PS) {
if (conf->flags & IEEE80211_CONF_PS) {
- sc->sc_flags |= SC_OP_PS_ENABLED;
+ sc->ps_flags |= PS_ENABLED;
if (!(ah->caps.hw_caps &
ATH9K_HW_CAP_AUTOSLEEP)) {
if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) {
@@ -1551,23 +1551,23 @@
* At this point we know hardware has received an ACK
* of a previously sent null data frame.
*/
- if ((sc->sc_flags & SC_OP_NULLFUNC_COMPLETED)) {
- sc->sc_flags &= ~SC_OP_NULLFUNC_COMPLETED;
+ if ((sc->ps_flags & PS_NULLFUNC_COMPLETED)) {
+ sc->ps_flags &= ~PS_NULLFUNC_COMPLETED;
sc->ps_enabled = true;
ath9k_hw_setrxabort(sc->sc_ah, 1);
}
} else {
sc->ps_enabled = false;
- sc->sc_flags &= ~(SC_OP_PS_ENABLED |
- SC_OP_NULLFUNC_COMPLETED);
+ sc->ps_flags &= ~(PS_ENABLED |
+ PS_NULLFUNC_COMPLETED);
ath9k_setpower(sc, ATH9K_PM_AWAKE);
if (!(ah->caps.hw_caps &
ATH9K_HW_CAP_AUTOSLEEP)) {
ath9k_hw_setrxabort(sc->sc_ah, 0);
- sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON |
- SC_OP_WAIT_FOR_CAB |
- SC_OP_WAIT_FOR_PSPOLL_DATA |
- SC_OP_WAIT_FOR_TX_ACK);
+ sc->ps_flags &= ~(PS_WAIT_FOR_BEACON |
+ PS_WAIT_FOR_CAB |
+ PS_WAIT_FOR_PSPOLL_DATA |
+ PS_WAIT_FOR_TX_ACK);
if (sc->imask & ATH9K_INT_TIM_TIMER) {
sc->imask &= ~ATH9K_INT_TIM_TIMER;
ath9k_hw_set_interrupts(sc->sc_ah,