| /* |
| * SAMSUNG EXYNOS USB HOST OHCI Controller |
| * |
| * Copyright (C) 2011 Samsung Electronics Co.Ltd |
| * Author: Jingoo Han <jg1.han@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/usb/phy.h> |
| #include <linux/usb/samsung_usb_phy.h> |
| #include <linux/usb.h> |
| #include <linux/usb/hcd.h> |
| #include <linux/usb/otg.h> |
| |
| #include "ohci.h" |
| |
| #define DRIVER_DESC "OHCI EXYNOS driver" |
| |
| static const char hcd_name[] = "ohci-exynos"; |
| static struct hc_driver __read_mostly exynos_ohci_hc_driver; |
| |
| #define to_exynos_ohci(hcd) (struct exynos_ohci_hcd *)(hcd_to_ohci(hcd)->priv) |
| |
| struct exynos_ohci_hcd { |
| struct clk *clk; |
| struct usb_phy *phy; |
| struct usb_otg *otg; |
| }; |
| |
| static void exynos_ohci_phy_enable(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); |
| |
| if (exynos_ohci->phy) |
| usb_phy_init(exynos_ohci->phy); |
| } |
| |
| static void exynos_ohci_phy_disable(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); |
| |
| if (exynos_ohci->phy) |
| usb_phy_shutdown(exynos_ohci->phy); |
| } |
| |
| static int exynos_ohci_probe(struct platform_device *pdev) |
| { |
| struct exynos_ohci_hcd *exynos_ohci; |
| struct usb_hcd *hcd; |
| struct resource *res; |
| struct usb_phy *phy; |
| int irq; |
| int err; |
| |
| /* |
| * Right now device-tree probed devices don't get dma_mask set. |
| * Since shared usb code relies on it, set it here for now. |
| * Once we move to full device tree support this will vanish off. |
| */ |
| err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (err) |
| return err; |
| |
| hcd = usb_create_hcd(&exynos_ohci_hc_driver, |
| &pdev->dev, dev_name(&pdev->dev)); |
| if (!hcd) { |
| dev_err(&pdev->dev, "Unable to create HCD\n"); |
| return -ENOMEM; |
| } |
| |
| exynos_ohci = to_exynos_ohci(hcd); |
| |
| if (of_device_is_compatible(pdev->dev.of_node, |
| "samsung,exynos5440-ohci")) |
| goto skip_phy; |
| |
| phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); |
| if (IS_ERR(phy)) { |
| usb_put_hcd(hcd); |
| dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); |
| return -EPROBE_DEFER; |
| } else { |
| exynos_ohci->phy = phy; |
| exynos_ohci->otg = phy->otg; |
| } |
| |
| skip_phy: |
| exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost"); |
| |
| if (IS_ERR(exynos_ohci->clk)) { |
| dev_err(&pdev->dev, "Failed to get usbhost clock\n"); |
| err = PTR_ERR(exynos_ohci->clk); |
| goto fail_clk; |
| } |
| |
| err = clk_prepare_enable(exynos_ohci->clk); |
| if (err) |
| goto fail_clk; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "Failed to get I/O memory\n"); |
| err = -ENXIO; |
| goto fail_io; |
| } |
| |
| hcd->rsrc_start = res->start; |
| hcd->rsrc_len = resource_size(res); |
| hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len); |
| if (!hcd->regs) { |
| dev_err(&pdev->dev, "Failed to remap I/O memory\n"); |
| err = -ENOMEM; |
| goto fail_io; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (!irq) { |
| dev_err(&pdev->dev, "Failed to get IRQ\n"); |
| err = -ENODEV; |
| goto fail_io; |
| } |
| |
| if (exynos_ohci->otg) |
| exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); |
| |
| platform_set_drvdata(pdev, hcd); |
| |
| exynos_ohci_phy_enable(pdev); |
| |
| err = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to add USB HCD\n"); |
| goto fail_add_hcd; |
| } |
| return 0; |
| |
| fail_add_hcd: |
| exynos_ohci_phy_disable(pdev); |
| fail_io: |
| clk_disable_unprepare(exynos_ohci->clk); |
| fail_clk: |
| usb_put_hcd(hcd); |
| return err; |
| } |
| |
| static int exynos_ohci_remove(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); |
| |
| usb_remove_hcd(hcd); |
| |
| if (exynos_ohci->otg) |
| exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); |
| |
| exynos_ohci_phy_disable(pdev); |
| |
| clk_disable_unprepare(exynos_ohci->clk); |
| |
| usb_put_hcd(hcd); |
| |
| return 0; |
| } |
| |
| static void exynos_ohci_shutdown(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| |
| if (hcd->driver->shutdown) |
| hcd->driver->shutdown(hcd); |
| } |
| |
| #ifdef CONFIG_PM |
| static int exynos_ohci_suspend(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); |
| struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| struct platform_device *pdev = to_platform_device(dev); |
| unsigned long flags; |
| int rc = 0; |
| |
| /* |
| * Root hub was already suspended. Disable irq emission and |
| * mark HW unaccessible, bail out if RH has been resumed. Use |
| * the spinlock to properly synchronize with possible pending |
| * RH suspend or resume activity. |
| */ |
| spin_lock_irqsave(&ohci->lock, flags); |
| if (ohci->rh_state != OHCI_RH_SUSPENDED && |
| ohci->rh_state != OHCI_RH_HALTED) { |
| rc = -EINVAL; |
| goto fail; |
| } |
| |
| clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); |
| |
| if (exynos_ohci->otg) |
| exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); |
| |
| exynos_ohci_phy_disable(pdev); |
| |
| clk_disable_unprepare(exynos_ohci->clk); |
| |
| fail: |
| spin_unlock_irqrestore(&ohci->lock, flags); |
| |
| return rc; |
| } |
| |
| static int exynos_ohci_resume(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| clk_prepare_enable(exynos_ohci->clk); |
| |
| if (exynos_ohci->otg) |
| exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); |
| |
| exynos_ohci_phy_enable(pdev); |
| |
| ohci_resume(hcd, false); |
| |
| return 0; |
| } |
| #else |
| #define exynos_ohci_suspend NULL |
| #define exynos_ohci_resume NULL |
| #endif |
| |
| static const struct ohci_driver_overrides exynos_overrides __initconst = { |
| .extra_priv_size = sizeof(struct exynos_ohci_hcd), |
| }; |
| |
| static const struct dev_pm_ops exynos_ohci_pm_ops = { |
| .suspend = exynos_ohci_suspend, |
| .resume = exynos_ohci_resume, |
| }; |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id exynos_ohci_match[] = { |
| { .compatible = "samsung,exynos4210-ohci" }, |
| { .compatible = "samsung,exynos5440-ohci" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_ohci_match); |
| #endif |
| |
| static struct platform_driver exynos_ohci_driver = { |
| .probe = exynos_ohci_probe, |
| .remove = exynos_ohci_remove, |
| .shutdown = exynos_ohci_shutdown, |
| .driver = { |
| .name = "exynos-ohci", |
| .owner = THIS_MODULE, |
| .pm = &exynos_ohci_pm_ops, |
| .of_match_table = of_match_ptr(exynos_ohci_match), |
| } |
| }; |
| static int __init ohci_exynos_init(void) |
| { |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| pr_info("%s: " DRIVER_DESC "\n", hcd_name); |
| ohci_init_driver(&exynos_ohci_hc_driver, &exynos_overrides); |
| return platform_driver_register(&exynos_ohci_driver); |
| } |
| module_init(ohci_exynos_init); |
| |
| static void __exit ohci_exynos_cleanup(void) |
| { |
| platform_driver_unregister(&exynos_ohci_driver); |
| } |
| module_exit(ohci_exynos_cleanup); |
| |
| MODULE_ALIAS("platform:exynos-ohci"); |
| MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); |
| MODULE_LICENSE("GPL v2"); |