[ARM] 4761/1: [AT91] Board-support for NEW_LEDs
Add NEW_LEDs support for the following boards:
- Cogent CSB337
- Atmel AT91RM9200-DK
- Atmel AT91RM9200-EK
- Atmel AT91SAM9263-EK
Mostly based on patch from David Brownell.
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 51cb3c8..0e2a11f 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -215,6 +215,28 @@
static void __init csb300_add_device_buttons(void) {}
#endif
+static struct gpio_led csb_leds[] = {
+ { /* "led0", yellow */
+ .name = "led0",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* "led1", green */
+ .name = "led1",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "led2", yellow */
+ .name = "led2",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "ide-disk",
+ },
+};
+
+
static void __init csb337_board_init(void)
{
/* Serial */
@@ -236,6 +258,8 @@
at91_add_device_mmc(0, &csb337_mmc_data);
/* NOR flash */
platform_device_register(&csb_flash);
+ /* LEDs */
+ at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
/* Switches on CSB300 */
csb300_add_device_buttons();
}
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 40c9e43..0a897ef 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -183,6 +183,14 @@
.num_resources = 1,
};
+static struct gpio_led dk_leds[] = {
+ {
+ .name = "led0",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
static void __init dk_board_init(void)
{
@@ -213,6 +221,8 @@
at91_add_device_nand(&dk_nand_data);
/* NOR Flash */
platform_device_register(&dk_flash);
+ /* LEDs */
+ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
/* VGA */
// dk_add_device_video();
}
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 53a5ef9..0574e50 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -141,6 +141,25 @@
.num_resources = 1,
};
+static struct gpio_led ek_leds[] = {
+ { /* "user led 1", DS2 */
+ .name = "green",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "user led 2", DS4 */
+ .name = "yellow",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* "user led 3", DS6 */
+ .name = "red",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ }
+};
static void __init ek_board_init(void)
{
@@ -167,6 +186,8 @@
#endif
/* NOR Flash */
platform_device_register(&ek_flash);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* VGA */
// ek_add_device_video();
}
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index a9dd595..2df0ff2 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -272,6 +272,30 @@
};
+/*
+ * LEDs ... these could all be PWM-driven, for variable brightness
+ */
+static struct gpio_led ek_leds[] = {
+ { /* "left" led, green, userled1, pwm1 */
+ .name = "ds1",
+ .gpio = AT91_PIN_PB8,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "right" led, green, userled2, pwm2 */
+ .name = "ds2",
+ .gpio = AT91_PIN_PC29,
+ .active_low = 1,
+ .default_trigger = "nand-disk",
+ },
+ { /* "power" led, yellow, pwm0 */
+ .name = "ds3",
+ .gpio = AT91_PIN_PB7,
+ .default_trigger = "heartbeat",
+ },
+};
+
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -297,6 +321,8 @@
at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")