ide-tape: remove struct idetape_request_sense_result_t
Bart:
- remove unnecessary comment change
- remove two needless "!!"
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 58c4c1b..a7670fb 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -333,32 +333,6 @@
} idetape_stage_t;
/*
- * REQUEST SENSE packet command result - Data Format.
- */
-typedef struct {
- unsigned error_code :7; /* Current of deferred errors */
- unsigned valid :1; /* The information field conforms to QIC-157C */
- __u8 reserved1 :8; /* Segment Number - Reserved */
- unsigned sense_key :4; /* Sense Key */
- unsigned reserved2_4 :1; /* Reserved */
- unsigned ili :1; /* Incorrect Length Indicator */
- unsigned eom :1; /* End Of Medium */
- unsigned filemark :1; /* Filemark */
- __u32 information __attribute__ ((packed));
- __u8 asl; /* Additional sense length (n-7) */
- __u32 command_specific; /* Additional command specific information */
- __u8 asc; /* Additional Sense Code */
- __u8 ascq; /* Additional Sense Code Qualifier */
- __u8 replaceable_unit_code; /* Field Replaceable Unit Code */
- unsigned sk_specific1 :7; /* Sense Key Specific */
- unsigned sksv :1; /* Sense Key Specific information is valid */
- __u8 sk_specific2; /* Sense Key Specific */
- __u8 sk_specific3; /* Sense Key Specific */
- __u8 pad[2]; /* Padding to 20 bytes */
-} idetape_request_sense_result_t;
-
-
-/*
* Most of our global data which we need to save even as we leave the
* driver due to an interrupt or a timer event is stored in a variable
* of type idetape_tape_t, defined below.
@@ -512,9 +486,6 @@
int avg_size;
int avg_speed;
- /* last sense information */
- idetape_request_sense_result_t sense;
-
char vendor_id[10];
char product_id[18];
char firmware_revision[6];
@@ -1025,36 +996,34 @@
}
/*
- * idetape_analyze_error is called on each failed packet command retry
- * to analyze the request sense. We currently do not utilize this
- * information.
+ * called on each failed packet command retry to analyze the request sense. We
+ * currently do not utilize this information.
*/
-static void idetape_analyze_error (ide_drive_t *drive, idetape_request_sense_result_t *result)
+static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t *pc = tape->failed_pc;
- tape->sense = *result;
- tape->sense_key = result->sense_key;
- tape->asc = result->asc;
- tape->ascq = result->ascq;
+ tape->sense_key = sense[2] & 0xF;
+ tape->asc = sense[12];
+ tape->ascq = sense[13];
#if IDETAPE_DEBUG_LOG
/*
- * Without debugging, we only log an error if we decided to
- * give up retrying.
+ * Without debugging, we only log an error if we decided to give up
+ * retrying.
*/
if (tape->debug_level >= 1)
printk(KERN_INFO "ide-tape: pc = %x, sense key = %x, "
"asc = %x, ascq = %x\n",
- pc->c[0], result->sense_key,
- result->asc, result->ascq);
+ pc->c[0], tape->sense_key,
+ tape->asc, tape->ascq);
#endif /* IDETAPE_DEBUG_LOG */
- /*
- * Correct pc->actually_transferred by asking the tape.
- */
+ /* Correct pc->actually_transferred by asking the tape. */
if (test_bit(PC_DMA_ERROR, &pc->flags)) {
- pc->actually_transferred = pc->request_transfer - tape->tape_block_size * ntohl(get_unaligned(&result->information));
+ pc->actually_transferred = pc->request_transfer -
+ tape->tape_block_size *
+ ntohl(get_unaligned((u32 *)&sense[3]));
idetape_update_buffers(pc);
}
@@ -1064,28 +1033,28 @@
* (i.e. Seagate STT3401A Travan) don't support 0-length read/writes.
*/
if ((pc->c[0] == IDETAPE_READ_CMD || pc->c[0] == IDETAPE_WRITE_CMD)
- && pc->c[4] == 0 && pc->c[3] == 0 && pc->c[2] == 0) { /* length==0 */
- if (result->sense_key == 5) {
+ /* length == 0 */
+ && pc->c[4] == 0 && pc->c[3] == 0 && pc->c[2] == 0) {
+ if (tape->sense_key == 5) {
/* don't report an error, everything's ok */
pc->error = 0;
/* don't retry read/write */
set_bit(PC_ABORT, &pc->flags);
}
}
- if (pc->c[0] == IDETAPE_READ_CMD && result->filemark) {
+ if (pc->c[0] == IDETAPE_READ_CMD && (sense[2] & 0x80)) {
pc->error = IDETAPE_ERROR_FILEMARK;
set_bit(PC_ABORT, &pc->flags);
}
if (pc->c[0] == IDETAPE_WRITE_CMD) {
- if (result->eom ||
- (result->sense_key == 0xd && result->asc == 0x0 &&
- result->ascq == 0x2)) {
+ if ((sense[2] & 0x40) || (tape->sense_key == 0xd
+ && tape->asc == 0x0 && tape->ascq == 0x2)) {
pc->error = IDETAPE_ERROR_EOD;
set_bit(PC_ABORT, &pc->flags);
}
}
if (pc->c[0] == IDETAPE_READ_CMD || pc->c[0] == IDETAPE_WRITE_CMD) {
- if (result->sense_key == 8) {
+ if (tape->sense_key == 8) {
pc->error = IDETAPE_ERROR_EOD;
set_bit(PC_ABORT, &pc->flags);
}
@@ -1327,7 +1296,7 @@
printk(KERN_INFO "ide-tape: Reached idetape_request_sense_callback\n");
#endif /* IDETAPE_DEBUG_LOG */
if (!tape->pc->error) {
- idetape_analyze_error(drive, (idetape_request_sense_result_t *) tape->pc->buffer);
+ idetape_analyze_error(drive, tape->pc->buffer);
idetape_end_request(drive, 1, 0);
} else {
printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - Aborting request!\n");