diff --git a/Documentation/ABI/testing/sysfs-bus-iio-meas-spec b/Documentation/ABI/testing/sysfs-bus-iio-meas-spec
index 6d47e54..1a6265e 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-meas-spec
+++ b/Documentation/ABI/testing/sysfs-bus-iio-meas-spec
@@ -5,3 +5,4 @@
                 Reading returns either '1' or '0'. '1' means that the
                 battery level supplied to sensor is below 2.25V.
                 This ABI is available for tsys02d, htu21, ms8607
+		This ABI is available for htu21, ms8607
diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index a7e5ee5..6a23698 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -29,6 +29,8 @@
 	help
 	  If you say yes here you get support for the Measurement Specialties
 	  HTU21 humidity and temperature sensor.
+	  This driver is also used for MS8607 temperature, pressure & humidity
+	  sensor
 
 	  This driver can also be built as a module. If so, the module will
 	  be called htu21.
diff --git a/drivers/iio/humidity/htu21.c b/drivers/iio/humidity/htu21.c
index b7f8d05..d1636a7 100644
--- a/drivers/iio/humidity/htu21.c
+++ b/drivers/iio/humidity/htu21.c
@@ -1,6 +1,7 @@
 /*
  * htu21.c - Support for Measurement-Specialties
  *           htu21 temperature & humidity sensor
+ *	     and humidity part of MS8607 sensor
  *
  * Copyright (c) 2014 Measurement-Specialties
  *
@@ -10,6 +11,8 @@
  *
  * Datasheet:
  *  http://www.meas-spec.com/downloads/HTU21D.pdf
+ * Datasheet:
+ *  http://www.meas-spec.com/downloads/MS8607-02BA01.pdf
  */
 
 #include <linux/init.h>
@@ -24,6 +27,11 @@
 
 #define HTU21_RESET				0xFE
 
+enum {
+	HTU21,
+	MS8607
+};
+
 static const int htu21_samp_freq[4] = { 20, 40, 70, 120 };
 /* String copy of the above const for readability purpose */
 static const char htu21_show_samp_freq[] = "20 40 70 120";
@@ -106,6 +114,18 @@
 	 }
 };
 
+/*
+ * Meas Spec recommendation is to not read temperature
+ * on this driver part for MS8607
+ */
+static const struct iio_chan_spec ms8607_channels[] = {
+	{
+		.type = IIO_HUMIDITYRELATIVE,
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+	 }
+};
+
 static ssize_t htu21_show_battery_low(struct device *dev,
 				      struct device_attribute *attr, char *buf)
 {
@@ -188,8 +208,14 @@
 	indio_dev->name = id->name;
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->channels = htu21_channels;
-	indio_dev->num_channels = ARRAY_SIZE(htu21_channels);
+
+	if (id->driver_data == MS8607) {
+		indio_dev->channels = ms8607_channels;
+		indio_dev->num_channels = ARRAY_SIZE(ms8607_channels);
+	} else {
+		indio_dev->channels = htu21_channels;
+		indio_dev->num_channels = ARRAY_SIZE(htu21_channels);
+	}
 
 	i2c_set_clientdata(client, indio_dev);
 
@@ -206,7 +232,8 @@
 }
 
 static const struct i2c_device_id htu21_id[] = {
-	{"htu21", 0},
+	{"htu21", HTU21},
+	{"ms8607-humidity", MS8607},
 	{}
 };
 
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 9282ec4..6f2e7c9 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -86,6 +86,8 @@
 	help
 	  If you say yes here you get support for the Measurement Specialties
 	  MS5637 pressure and temperature sensor.
+	  This driver is also used for MS8607 temperature, pressure & humidity
+	  sensor
 
 	  This driver can also be built as a module. If so, the module will
 	  be called ms5637.
diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c
index e3ad9d3..e8d0e0d 100644
--- a/drivers/iio/pressure/ms5637.c
+++ b/drivers/iio/pressure/ms5637.c
@@ -1,5 +1,5 @@
 /*
- * ms5637.c - Support for Measurement-Specialties ms5637
+ * ms5637.c - Support for Measurement-Specialties ms5637 and ms8607
  *            pressure & temperature sensor
  *
  * Copyright (c) 2015 Measurement-Specialties
@@ -10,7 +10,10 @@
  *
  * Datasheet:
  *  http://www.meas-spec.com/downloads/MS5637-02BA03.pdf
+ * Datasheet:
+ *  http://www.meas-spec.com/downloads/MS8607-02BA01.pdf
  */
+
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
@@ -167,6 +170,7 @@
 
 static const struct i2c_device_id ms5637_id[] = {
 	{"ms5637", 0},
+	{"ms8607-temppressure", 1},
 	{}
 };