| /* |
| * wm8994-core.c -- Device access for Wolfson WM8994 |
| * |
| * Copyright 2009 Wolfson Microelectronics PLC. |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/mfd/core.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/regulator/machine.h> |
| |
| #include <linux/mfd/wm8994/core.h> |
| #include <linux/mfd/wm8994/pdata.h> |
| #include <linux/mfd/wm8994/registers.h> |
| |
| #include "wm8994.h" |
| |
| /** |
| * wm8994_reg_read: Read a single WM8994 register. |
| * |
| * @wm8994: Device to read from. |
| * @reg: Register to read. |
| */ |
| int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg) |
| { |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(wm8994->regmap, reg, &val); |
| |
| if (ret < 0) |
| return ret; |
| else |
| return val; |
| } |
| EXPORT_SYMBOL_GPL(wm8994_reg_read); |
| |
| /** |
| * wm8994_bulk_read: Read multiple WM8994 registers |
| * |
| * @wm8994: Device to read from |
| * @reg: First register |
| * @count: Number of registers |
| * @buf: Buffer to fill. The data will be returned big endian. |
| */ |
| int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg, |
| int count, u16 *buf) |
| { |
| return regmap_bulk_read(wm8994->regmap, reg, buf, count); |
| } |
| |
| /** |
| * wm8994_reg_write: Write a single WM8994 register. |
| * |
| * @wm8994: Device to write to. |
| * @reg: Register to write to. |
| * @val: Value to write. |
| */ |
| int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg, |
| unsigned short val) |
| { |
| return regmap_write(wm8994->regmap, reg, val); |
| } |
| EXPORT_SYMBOL_GPL(wm8994_reg_write); |
| |
| /** |
| * wm8994_bulk_write: Write multiple WM8994 registers |
| * |
| * @wm8994: Device to write to |
| * @reg: First register |
| * @count: Number of registers |
| * @buf: Buffer to write from. Data must be big-endian formatted. |
| */ |
| int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg, |
| int count, const u16 *buf) |
| { |
| return regmap_raw_write(wm8994->regmap, reg, buf, count * sizeof(u16)); |
| } |
| EXPORT_SYMBOL_GPL(wm8994_bulk_write); |
| |
| /** |
| * wm8994_set_bits: Set the value of a bitfield in a WM8994 register |
| * |
| * @wm8994: Device to write to. |
| * @reg: Register to write to. |
| * @mask: Mask of bits to set. |
| * @val: Value to set (unshifted) |
| */ |
| int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg, |
| unsigned short mask, unsigned short val) |
| { |
| return regmap_update_bits(wm8994->regmap, reg, mask, val); |
| } |
| EXPORT_SYMBOL_GPL(wm8994_set_bits); |
| |
| static struct mfd_cell wm8994_regulator_devs[] = { |
| { |
| .name = "wm8994-ldo", |
| .id = 1, |
| .pm_runtime_no_callbacks = true, |
| }, |
| { |
| .name = "wm8994-ldo", |
| .id = 2, |
| .pm_runtime_no_callbacks = true, |
| }, |
| }; |
| |
| static struct resource wm8994_codec_resources[] = { |
| { |
| .start = WM8994_IRQ_TEMP_SHUT, |
| .end = WM8994_IRQ_TEMP_WARN, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct resource wm8994_gpio_resources[] = { |
| { |
| .start = WM8994_IRQ_GPIO(1), |
| .end = WM8994_IRQ_GPIO(11), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct mfd_cell wm8994_devs[] = { |
| { |
| .name = "wm8994-codec", |
| .num_resources = ARRAY_SIZE(wm8994_codec_resources), |
| .resources = wm8994_codec_resources, |
| }, |
| |
| { |
| .name = "wm8994-gpio", |
| .num_resources = ARRAY_SIZE(wm8994_gpio_resources), |
| .resources = wm8994_gpio_resources, |
| .pm_runtime_no_callbacks = true, |
| }, |
| }; |
| |
| /* |
| * Supplies for the main bulk of CODEC; the LDO supplies are ignored |
| * and should be handled via the standard regulator API supply |
| * management. |
| */ |
| static const char *wm1811_main_supplies[] = { |
| "DBVDD1", |
| "DBVDD2", |
| "DBVDD3", |
| "DCVDD", |
| "AVDD1", |
| "AVDD2", |
| "CPVDD", |
| "SPKVDD1", |
| "SPKVDD2", |
| }; |
| |
| static const char *wm8994_main_supplies[] = { |
| "DBVDD", |
| "DCVDD", |
| "AVDD1", |
| "AVDD2", |
| "CPVDD", |
| "SPKVDD1", |
| "SPKVDD2", |
| }; |
| |
| static const char *wm8958_main_supplies[] = { |
| "DBVDD1", |
| "DBVDD2", |
| "DBVDD3", |
| "DCVDD", |
| "AVDD1", |
| "AVDD2", |
| "CPVDD", |
| "SPKVDD1", |
| "SPKVDD2", |
| }; |
| |
| #ifdef CONFIG_PM |
| static int wm8994_suspend(struct device *dev) |
| { |
| struct wm8994 *wm8994 = dev_get_drvdata(dev); |
| int ret; |
| |
| /* Don't actually go through with the suspend if the CODEC is |
| * still active (eg, for audio passthrough from CP. */ |
| ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_1); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read power status: %d\n", ret); |
| } else if (ret & WM8994_VMID_SEL_MASK) { |
| dev_dbg(dev, "CODEC still active, ignoring suspend\n"); |
| return 0; |
| } |
| |
| ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read power status: %d\n", ret); |
| } else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA | |
| WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA | |
| WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) { |
| dev_dbg(dev, "CODEC still active, ignoring suspend\n"); |
| return 0; |
| } |
| |
| ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read power status: %d\n", ret); |
| } else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA | |
| WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA | |
| WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) { |
| dev_dbg(dev, "CODEC still active, ignoring suspend\n"); |
| return 0; |
| } |
| |
| switch (wm8994->type) { |
| case WM8958: |
| case WM1811: |
| ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read power status: %d\n", ret); |
| } else if (ret & WM8958_MICD_ENA) { |
| dev_dbg(dev, "CODEC still active, ignoring suspend\n"); |
| return 0; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| switch (wm8994->type) { |
| case WM1811: |
| ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read jackdet: %d\n", ret); |
| } else if (ret & WM1811_JACKDET_MODE_MASK) { |
| dev_dbg(dev, "CODEC still active, ignoring suspend\n"); |
| return 0; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| switch (wm8994->type) { |
| case WM1811: |
| ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read jackdet: %d\n", ret); |
| } else if (ret & WM1811_JACKDET_MODE_MASK) { |
| dev_dbg(dev, "CODEC still active, ignoring suspend\n"); |
| return 0; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| /* Disable LDO pulldowns while the device is suspended if we |
| * don't know that something will be driving them. */ |
| if (!wm8994->ldo_ena_always_driven) |
| wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, |
| WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, |
| WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD); |
| |
| /* Explicitly put the device into reset in case regulators |
| * don't get disabled in order to ensure consistent restart. |
| */ |
| wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET, |
| wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET)); |
| |
| regcache_mark_dirty(wm8994->regmap); |
| |
| /* Restore GPIO registers to prevent problems with mismatched |
| * pin configurations. |
| */ |
| ret = regcache_sync_region(wm8994->regmap, WM8994_GPIO_1, |
| WM8994_GPIO_11); |
| if (ret != 0) |
| dev_err(dev, "Failed to restore GPIO registers: %d\n", ret); |
| |
| /* In case one of the GPIOs is used as a wake input. */ |
| ret = regcache_sync_region(wm8994->regmap, |
| WM8994_INTERRUPT_STATUS_1_MASK, |
| WM8994_INTERRUPT_STATUS_1_MASK); |
| if (ret != 0) |
| dev_err(dev, "Failed to restore interrupt mask: %d\n", ret); |
| |
| regcache_cache_only(wm8994->regmap, true); |
| wm8994->suspended = true; |
| |
| ret = regulator_bulk_disable(wm8994->num_supplies, |
| wm8994->supplies); |
| if (ret != 0) { |
| dev_err(dev, "Failed to disable supplies: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int wm8994_resume(struct device *dev) |
| { |
| struct wm8994 *wm8994 = dev_get_drvdata(dev); |
| int ret; |
| |
| /* We may have lied to the PM core about suspending */ |
| if (!wm8994->suspended) |
| return 0; |
| |
| ret = regulator_bulk_enable(wm8994->num_supplies, |
| wm8994->supplies); |
| if (ret != 0) { |
| dev_err(dev, "Failed to enable supplies: %d\n", ret); |
| return ret; |
| } |
| |
| regcache_cache_only(wm8994->regmap, false); |
| ret = regcache_sync(wm8994->regmap); |
| if (ret != 0) { |
| dev_err(dev, "Failed to restore register map: %d\n", ret); |
| goto err_enable; |
| } |
| |
| /* Disable LDO pulldowns while the device is active */ |
| wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, |
| WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, |
| 0); |
| |
| wm8994->suspended = false; |
| |
| return 0; |
| |
| err_enable: |
| regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); |
| |
| return ret; |
| } |
| #endif |
| |
| #ifdef CONFIG_REGULATOR |
| static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo) |
| { |
| struct wm8994_ldo_pdata *ldo_pdata; |
| |
| if (!pdata) |
| return 0; |
| |
| ldo_pdata = &pdata->ldo[ldo]; |
| |
| if (!ldo_pdata->init_data) |
| return 0; |
| |
| return ldo_pdata->init_data->num_consumer_supplies != 0; |
| } |
| #else |
| static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo) |
| { |
| return 0; |
| } |
| #endif |
| |
| static const struct reg_default wm8994_revc_patch[] = { |
| { 0x102, 0x3 }, |
| { 0x56, 0x3 }, |
| { 0x817, 0x0 }, |
| { 0x102, 0x0 }, |
| }; |
| |
| static const struct reg_default wm8958_reva_patch[] = { |
| { 0x102, 0x3 }, |
| { 0xcb, 0x81 }, |
| { 0x817, 0x0 }, |
| { 0x102, 0x0 }, |
| }; |
| |
| static const struct reg_default wm1811_reva_patch[] = { |
| { 0x102, 0x3 }, |
| { 0x56, 0xc07 }, |
| { 0x5d, 0x7e }, |
| { 0x5e, 0x0 }, |
| { 0x102, 0x0 }, |
| }; |
| |
| /* |
| * Instantiate the generic non-control parts of the device. |
| */ |
| static int wm8994_device_init(struct wm8994 *wm8994, int irq) |
| { |
| struct wm8994_pdata *pdata; |
| struct regmap_config *regmap_config; |
| const struct reg_default *regmap_patch = NULL; |
| const char *devname; |
| int ret, i, patch_regs = 0; |
| int pulls = 0; |
| |
| if (dev_get_platdata(wm8994->dev)) { |
| pdata = dev_get_platdata(wm8994->dev); |
| wm8994->pdata = *pdata; |
| } |
| pdata = &wm8994->pdata; |
| |
| dev_set_drvdata(wm8994->dev, wm8994); |
| |
| /* Add the on-chip regulators first for bootstrapping */ |
| ret = mfd_add_devices(wm8994->dev, -1, |
| wm8994_regulator_devs, |
| ARRAY_SIZE(wm8994_regulator_devs), |
| NULL, 0, NULL); |
| if (ret != 0) { |
| dev_err(wm8994->dev, "Failed to add children: %d\n", ret); |
| goto err; |
| } |
| |
| switch (wm8994->type) { |
| case WM1811: |
| wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies); |
| break; |
| case WM8994: |
| wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies); |
| break; |
| case WM8958: |
| wm8994->num_supplies = ARRAY_SIZE(wm8958_main_supplies); |
| break; |
| default: |
| BUG(); |
| goto err; |
| } |
| |
| wm8994->supplies = devm_kzalloc(wm8994->dev, |
| sizeof(struct regulator_bulk_data) * |
| wm8994->num_supplies, GFP_KERNEL); |
| if (!wm8994->supplies) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| switch (wm8994->type) { |
| case WM1811: |
| for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++) |
| wm8994->supplies[i].supply = wm1811_main_supplies[i]; |
| break; |
| case WM8994: |
| for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++) |
| wm8994->supplies[i].supply = wm8994_main_supplies[i]; |
| break; |
| case WM8958: |
| for (i = 0; i < ARRAY_SIZE(wm8958_main_supplies); i++) |
| wm8994->supplies[i].supply = wm8958_main_supplies[i]; |
| break; |
| default: |
| BUG(); |
| goto err; |
| } |
| |
| ret = devm_regulator_bulk_get(wm8994->dev, wm8994->num_supplies, |
| wm8994->supplies); |
| if (ret != 0) { |
| dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret); |
| goto err; |
| } |
| |
| ret = regulator_bulk_enable(wm8994->num_supplies, |
| wm8994->supplies); |
| if (ret != 0) { |
| dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret); |
| goto err; |
| } |
| |
| ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET); |
| if (ret < 0) { |
| dev_err(wm8994->dev, "Failed to read ID register\n"); |
| goto err_enable; |
| } |
| switch (ret) { |
| case 0x1811: |
| devname = "WM1811"; |
| if (wm8994->type != WM1811) |
| dev_warn(wm8994->dev, "Device registered as type %d\n", |
| wm8994->type); |
| wm8994->type = WM1811; |
| break; |
| case 0x8994: |
| devname = "WM8994"; |
| if (wm8994->type != WM8994) |
| dev_warn(wm8994->dev, "Device registered as type %d\n", |
| wm8994->type); |
| wm8994->type = WM8994; |
| break; |
| case 0x8958: |
| devname = "WM8958"; |
| if (wm8994->type != WM8958) |
| dev_warn(wm8994->dev, "Device registered as type %d\n", |
| wm8994->type); |
| wm8994->type = WM8958; |
| break; |
| default: |
| dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n", |
| ret); |
| ret = -EINVAL; |
| goto err_enable; |
| } |
| |
| ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION); |
| if (ret < 0) { |
| dev_err(wm8994->dev, "Failed to read revision register: %d\n", |
| ret); |
| goto err_enable; |
| } |
| wm8994->revision = ret & WM8994_CHIP_REV_MASK; |
| wm8994->cust_id = (ret & WM8994_CUST_ID_MASK) >> WM8994_CUST_ID_SHIFT; |
| |
| switch (wm8994->type) { |
| case WM8994: |
| switch (wm8994->revision) { |
| case 0: |
| case 1: |
| dev_warn(wm8994->dev, |
| "revision %c not fully supported\n", |
| 'A' + wm8994->revision); |
| break; |
| case 2: |
| case 3: |
| default: |
| regmap_patch = wm8994_revc_patch; |
| patch_regs = ARRAY_SIZE(wm8994_revc_patch); |
| break; |
| } |
| break; |
| |
| case WM8958: |
| switch (wm8994->revision) { |
| case 0: |
| regmap_patch = wm8958_reva_patch; |
| patch_regs = ARRAY_SIZE(wm8958_reva_patch); |
| break; |
| default: |
| break; |
| } |
| break; |
| |
| case WM1811: |
| /* Revision C did not change the relevant layer */ |
| if (wm8994->revision > 1) |
| wm8994->revision++; |
| |
| regmap_patch = wm1811_reva_patch; |
| patch_regs = ARRAY_SIZE(wm1811_reva_patch); |
| break; |
| |
| default: |
| break; |
| } |
| |
| dev_info(wm8994->dev, "%s revision %c CUST_ID %02x\n", devname, |
| 'A' + wm8994->revision, wm8994->cust_id); |
| |
| switch (wm8994->type) { |
| case WM1811: |
| regmap_config = &wm1811_regmap_config; |
| break; |
| case WM8994: |
| regmap_config = &wm8994_regmap_config; |
| break; |
| case WM8958: |
| regmap_config = &wm8958_regmap_config; |
| break; |
| default: |
| dev_err(wm8994->dev, "Unknown device type %d\n", wm8994->type); |
| return -EINVAL; |
| } |
| |
| ret = regmap_reinit_cache(wm8994->regmap, regmap_config); |
| if (ret != 0) { |
| dev_err(wm8994->dev, "Failed to reinit register cache: %d\n", |
| ret); |
| return ret; |
| } |
| |
| if (regmap_patch) { |
| ret = regmap_register_patch(wm8994->regmap, regmap_patch, |
| patch_regs); |
| if (ret != 0) { |
| dev_err(wm8994->dev, "Failed to register patch: %d\n", |
| ret); |
| goto err; |
| } |
| } |
| |
| wm8994->irq_base = pdata->irq_base; |
| wm8994->gpio_base = pdata->gpio_base; |
| |
| /* GPIO configuration is only applied if it's non-zero */ |
| for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) { |
| if (pdata->gpio_defaults[i]) { |
| wm8994_set_bits(wm8994, WM8994_GPIO_1 + i, |
| 0xffff, pdata->gpio_defaults[i]); |
| } |
| } |
| |
| wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven; |
| |
| if (pdata->spkmode_pu) |
| pulls |= WM8994_SPKMODE_PU; |
| |
| /* Disable unneeded pulls */ |
| wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, |
| WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD | |
| WM8994_SPKMODE_PU | WM8994_CSNADDR_PD, |
| pulls); |
| |
| /* In some system designs where the regulators are not in use, |
| * we can achieve a small reduction in leakage currents by |
| * floating LDO outputs. This bit makes no difference if the |
| * LDOs are enabled, it only affects cases where the LDOs were |
| * in operation and are then disabled. |
| */ |
| for (i = 0; i < WM8994_NUM_LDO_REGS; i++) { |
| if (wm8994_ldo_in_use(pdata, i)) |
| wm8994_set_bits(wm8994, WM8994_LDO_1 + i, |
| WM8994_LDO1_DISCH, WM8994_LDO1_DISCH); |
| else |
| wm8994_set_bits(wm8994, WM8994_LDO_1 + i, |
| WM8994_LDO1_DISCH, 0); |
| } |
| |
| wm8994_irq_init(wm8994); |
| |
| ret = mfd_add_devices(wm8994->dev, -1, |
| wm8994_devs, ARRAY_SIZE(wm8994_devs), |
| NULL, 0, NULL); |
| if (ret != 0) { |
| dev_err(wm8994->dev, "Failed to add children: %d\n", ret); |
| goto err_irq; |
| } |
| |
| pm_runtime_enable(wm8994->dev); |
| pm_runtime_idle(wm8994->dev); |
| |
| return 0; |
| |
| err_irq: |
| wm8994_irq_exit(wm8994); |
| err_enable: |
| regulator_bulk_disable(wm8994->num_supplies, |
| wm8994->supplies); |
| err: |
| mfd_remove_devices(wm8994->dev); |
| return ret; |
| } |
| |
| static void wm8994_device_exit(struct wm8994 *wm8994) |
| { |
| pm_runtime_disable(wm8994->dev); |
| mfd_remove_devices(wm8994->dev); |
| wm8994_irq_exit(wm8994); |
| regulator_bulk_disable(wm8994->num_supplies, |
| wm8994->supplies); |
| } |
| |
| static const struct of_device_id wm8994_of_match[] = { |
| { .compatible = "wlf,wm1811", }, |
| { .compatible = "wlf,wm8994", }, |
| { .compatible = "wlf,wm8958", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, wm8994_of_match); |
| |
| static int wm8994_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct wm8994 *wm8994; |
| int ret; |
| |
| wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL); |
| if (wm8994 == NULL) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(i2c, wm8994); |
| wm8994->dev = &i2c->dev; |
| wm8994->irq = i2c->irq; |
| wm8994->type = id->driver_data; |
| |
| wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config); |
| if (IS_ERR(wm8994->regmap)) { |
| ret = PTR_ERR(wm8994->regmap); |
| dev_err(wm8994->dev, "Failed to allocate register map: %d\n", |
| ret); |
| return ret; |
| } |
| |
| return wm8994_device_init(wm8994, i2c->irq); |
| } |
| |
| static int wm8994_i2c_remove(struct i2c_client *i2c) |
| { |
| struct wm8994 *wm8994 = i2c_get_clientdata(i2c); |
| |
| wm8994_device_exit(wm8994); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id wm8994_i2c_id[] = { |
| { "wm1811", WM1811 }, |
| { "wm1811a", WM1811 }, |
| { "wm8994", WM8994 }, |
| { "wm8958", WM8958 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id); |
| |
| static UNIVERSAL_DEV_PM_OPS(wm8994_pm_ops, wm8994_suspend, wm8994_resume, |
| NULL); |
| |
| static struct i2c_driver wm8994_i2c_driver = { |
| .driver = { |
| .name = "wm8994", |
| .owner = THIS_MODULE, |
| .pm = &wm8994_pm_ops, |
| .of_match_table = wm8994_of_match, |
| }, |
| .probe = wm8994_i2c_probe, |
| .remove = wm8994_i2c_remove, |
| .id_table = wm8994_i2c_id, |
| }; |
| |
| module_i2c_driver(wm8994_i2c_driver); |
| |
| MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC"); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |