Merge /spare/repo/linux-2.6/
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 30e8d58..3dbb1cb 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -7,7 +7,7 @@
* of the original driver such as link fail-over and link management because
* those should be done at higher levels.
*
- * Copyright (C) 2004, Stephen Hemminger <shemminger@osdl.org>
+ * Copyright (C) 2004, 2005 Stephen Hemminger <shemminger@osdl.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -42,19 +42,20 @@
#include "skge.h"
#define DRV_NAME "skge"
-#define DRV_VERSION "0.6"
+#define DRV_VERSION "0.7"
#define PFX DRV_NAME " "
#define DEFAULT_TX_RING_SIZE 128
#define DEFAULT_RX_RING_SIZE 512
#define MAX_TX_RING_SIZE 1024
#define MAX_RX_RING_SIZE 4096
+#define RX_COPY_THRESHOLD 128
+#define RX_BUF_SIZE 1536
#define PHY_RETRIES 1000
#define ETH_JUMBO_MTU 9000
#define TX_WATCHDOG (5 * HZ)
#define NAPI_WEIGHT 64
#define BLINK_HZ (HZ/4)
-#define LINK_POLL_HZ (HZ/10)
MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver");
MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
@@ -70,28 +71,17 @@
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
static const struct pci_device_id skge_id_table[] = {
- { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940,
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B,
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE,
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU,
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_SYSKONNECT, 0x9E00, /* SK-9Exx */
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T,
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_MARVELL, 0x4320, /* Gigabit Ethernet Controller */
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_MARVELL, 0x5005, /* Marvell (11ab), Belkin */
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD,
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1032,
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1064,
- PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_DEVICE(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940) },
+ { PCI_DEVICE(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
+ { PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) },
+ { PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1032) },
+ { PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1064) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, skge_id_table);
@@ -99,19 +89,22 @@
static int skge_up(struct net_device *dev);
static int skge_down(struct net_device *dev);
static void skge_tx_clean(struct skge_port *skge);
-static void skge_xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val);
-static void skge_gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val);
+static void xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val);
+static void gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val);
static void genesis_get_stats(struct skge_port *skge, u64 *data);
static void yukon_get_stats(struct skge_port *skge, u64 *data);
static void yukon_init(struct skge_hw *hw, int port);
static void yukon_reset(struct skge_hw *hw, int port);
static void genesis_mac_init(struct skge_hw *hw, int port);
static void genesis_reset(struct skge_hw *hw, int port);
+static void genesis_link_up(struct skge_port *skge);
+/* Avoid conditionals by using array */
static const int txqaddr[] = { Q_XA1, Q_XA2 };
static const int rxqaddr[] = { Q_R1, Q_R2 };
static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F };
static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F };
+static const u32 portirqmask[] = { IS_PORT_1, IS_PORT_2 };
/* Don't need to look at whole 16K.
* last interesting register is descriptor poll timer.
@@ -154,7 +147,7 @@
static int wol_supported(const struct skge_hw *hw)
{
return !((hw->chip_id == CHIP_ID_GENESIS ||
- (hw->chip_id == CHIP_ID_YUKON && chip_rev(hw) == 0)));
+ (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev == 0)));
}
static void skge_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
@@ -170,7 +163,7 @@
struct skge_port *skge = netdev_priv(dev);
struct skge_hw *hw = skge->hw;
- if(wol->wolopts != WAKE_MAGIC && wol->wolopts != 0)
+ if (wol->wolopts != WAKE_MAGIC && wol->wolopts != 0)
return -EOPNOTSUPP;
if (wol->wolopts == WAKE_MAGIC && !wol_supported(hw))
@@ -190,6 +183,36 @@
return 0;
}
+/* Determine supported/adverised modes based on hardware.
+ * Note: ethtoool ADVERTISED_xxx == SUPPORTED_xxx
+ */
+static u32 skge_supported_modes(const struct skge_hw *hw)
+{
+ u32 supported;
+
+ if (iscopper(hw)) {
+ supported = SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full
+ | SUPPORTED_Autoneg| SUPPORTED_TP;
+
+ if (hw->chip_id == CHIP_ID_GENESIS)
+ supported &= ~(SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full);
+
+ else if (hw->chip_id == CHIP_ID_YUKON)
+ supported &= ~SUPPORTED_1000baseT_Half;
+ } else
+ supported = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE
+ | SUPPORTED_Autoneg;
+
+ return supported;
+}
static int skge_get_settings(struct net_device *dev,
struct ethtool_cmd *ecmd)
@@ -198,38 +221,13 @@
struct skge_hw *hw = skge->hw;
ecmd->transceiver = XCVR_INTERNAL;
+ ecmd->supported = skge_supported_modes(hw);
if (iscopper(hw)) {
- if (hw->chip_id == CHIP_ID_GENESIS)
- ecmd->supported = SUPPORTED_1000baseT_Full
- | SUPPORTED_1000baseT_Half
- | SUPPORTED_Autoneg | SUPPORTED_TP;
- else {
- ecmd->supported = SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full
- | SUPPORTED_100baseT_Half
- | SUPPORTED_100baseT_Full
- | SUPPORTED_1000baseT_Half
- | SUPPORTED_1000baseT_Full
- | SUPPORTED_Autoneg| SUPPORTED_TP;
-
- if (hw->chip_id == CHIP_ID_YUKON)
- ecmd->supported &= ~SUPPORTED_1000baseT_Half;
-
- else if (hw->chip_id == CHIP_ID_YUKON_FE)
- ecmd->supported &= ~(SUPPORTED_1000baseT_Half
- | SUPPORTED_1000baseT_Full);
- }
-
ecmd->port = PORT_TP;
ecmd->phy_address = hw->phy_addr;
- } else {
- ecmd->supported = SUPPORTED_1000baseT_Full
- | SUPPORTED_FIBRE
- | SUPPORTED_Autoneg;
-
+ } else
ecmd->port = PORT_FIBRE;
- }
ecmd->advertising = skge->advertising;
ecmd->autoneg = skge->autoneg;
@@ -238,65 +236,57 @@
return 0;
}
-static u32 skge_modes(const struct skge_hw *hw)
-{
- u32 modes = ADVERTISED_Autoneg
- | ADVERTISED_1000baseT_Full | ADVERTISED_1000baseT_Half
- | ADVERTISED_100baseT_Full | ADVERTISED_100baseT_Half
- | ADVERTISED_10baseT_Full | ADVERTISED_10baseT_Half;
-
- if (iscopper(hw)) {
- modes |= ADVERTISED_TP;
- switch(hw->chip_id) {
- case CHIP_ID_GENESIS:
- modes &= ~(ADVERTISED_100baseT_Full
- | ADVERTISED_100baseT_Half
- | ADVERTISED_10baseT_Full
- | ADVERTISED_10baseT_Half);
- break;
-
- case CHIP_ID_YUKON:
- modes &= ~ADVERTISED_1000baseT_Half;
- break;
-
- case CHIP_ID_YUKON_FE:
- modes &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
- break;
- }
- } else {
- modes |= ADVERTISED_FIBRE;
- modes &= ~ADVERTISED_1000baseT_Half;
- }
- return modes;
-}
-
static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
struct skge_port *skge = netdev_priv(dev);
const struct skge_hw *hw = skge->hw;
+ u32 supported = skge_supported_modes(hw);
if (ecmd->autoneg == AUTONEG_ENABLE) {
- if (ecmd->advertising & skge_modes(hw))
- return -EINVAL;
+ ecmd->advertising = supported;
+ skge->duplex = -1;
+ skge->speed = -1;
} else {
+ u32 setting;
+
switch(ecmd->speed) {
case SPEED_1000:
- if (hw->chip_id == CHIP_ID_YUKON_FE)
+ if (ecmd->duplex == DUPLEX_FULL)
+ setting = SUPPORTED_1000baseT_Full;
+ else if (ecmd->duplex == DUPLEX_HALF)
+ setting = SUPPORTED_1000baseT_Half;
+ else
return -EINVAL;
break;
case SPEED_100:
+ if (ecmd->duplex == DUPLEX_FULL)
+ setting = SUPPORTED_100baseT_Full;
+ else if (ecmd->duplex == DUPLEX_HALF)
+ setting = SUPPORTED_100baseT_Half;
+ else
+ return -EINVAL;
+ break;
+
case SPEED_10:
- if (iscopper(hw) || hw->chip_id == CHIP_ID_GENESIS)
+ if (ecmd->duplex == DUPLEX_FULL)
+ setting = SUPPORTED_10baseT_Full;
+ else if (ecmd->duplex == DUPLEX_HALF)
+ setting = SUPPORTED_10baseT_Half;
+ else
return -EINVAL;
break;
default:
return -EINVAL;
}
+
+ if ((setting & supported) == 0)
+ return -EINVAL;
+
+ skge->speed = ecmd->speed;
+ skge->duplex = ecmd->duplex;
}
skge->autoneg = ecmd->autoneg;
- skge->speed = ecmd->speed;
- skge->duplex = ecmd->duplex;
skge->advertising = ecmd->advertising;
if (netif_running(dev)) {
@@ -393,7 +383,7 @@
{
int i;
- switch(stringset) {
+ switch (stringset) {
case ETH_SS_STATS:
for (i = 0; i < ARRAY_SIZE(skge_stats); i++)
memcpy(data + i * ETH_GSTRING_LEN,
@@ -511,14 +501,6 @@
return 0;
}
-/* Only Yukon II supports TSO (not implemented yet) */
-static int skge_set_tso(struct net_device *dev, u32 data)
-{
- if (data)
- return -EOPNOTSUPP;
- return 0;
-}
-
static void skge_get_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *ecmd)
{
@@ -540,9 +522,9 @@
skge->autoneg = ecmd->autoneg;
if (ecmd->rx_pause && ecmd->tx_pause)
skge->flow_control = FLOW_MODE_SYMMETRIC;
- else if(ecmd->rx_pause && !ecmd->tx_pause)
+ else if (ecmd->rx_pause && !ecmd->tx_pause)
skge->flow_control = FLOW_MODE_REM_SEND;
- else if(!ecmd->rx_pause && ecmd->tx_pause)
+ else if (!ecmd->rx_pause && ecmd->tx_pause)
skge->flow_control = FLOW_MODE_LOC_SEND;
else
skge->flow_control = FLOW_MODE_NONE;
@@ -559,8 +541,6 @@
{
if (hw->chip_id == CHIP_ID_GENESIS)
return 53215; /* or: 53.125 MHz */
- else if (hw->chip_id == CHIP_ID_YUKON_EC)
- return 125000; /* or: 125.000 MHz */
else
return 78215; /* or: 78.125 MHz */
}
@@ -643,30 +623,18 @@
static void skge_led_on(struct skge_hw *hw, int port)
{
if (hw->chip_id == CHIP_ID_GENESIS) {
- skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_ON);
+ skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
skge_write8(hw, B0_LED, LED_STAT_ON);
- skge_write8(hw, SKGEMAC_REG(port, RX_LED_TST), LED_T_ON);
- skge_write32(hw, SKGEMAC_REG(port, RX_LED_VAL), 100);
- skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_START);
+ skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON);
+ skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
+ skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
- switch (hw->phy_type) {
- case SK_PHY_BCOM:
- skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL,
- PHY_B_PEC_LED_ON);
- break;
- case SK_PHY_LONE:
- skge_xm_phy_write(hw, port, PHY_LONE_LED_CFG,
- 0x0800);
- break;
- default:
- skge_write8(hw, SKGEMAC_REG(port, TX_LED_TST), LED_T_ON);
- skge_write32(hw, SKGEMAC_REG(port, TX_LED_VAL), 100);
- skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_START);
- }
+ /* For Broadcom Phy only */
+ xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
} else {
- skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
- skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER,
PHY_M_LED_MO_DUP(MO_LED_ON) |
PHY_M_LED_MO_10(MO_LED_ON) |
PHY_M_LED_MO_100(MO_LED_ON) |
@@ -678,28 +646,17 @@
static void skge_led_off(struct skge_hw *hw, int port)
{
if (hw->chip_id == CHIP_ID_GENESIS) {
- skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_OFF);
+ skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
skge_write8(hw, B0_LED, LED_STAT_OFF);
- skge_write32(hw, SKGEMAC_REG(port, RX_LED_VAL), 0);
- skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_T_OFF);
+ skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
+ skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
- switch (hw->phy_type) {
- case SK_PHY_BCOM:
- skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL,
- PHY_B_PEC_LED_OFF);
- break;
- case SK_PHY_LONE:
- skge_xm_phy_write(hw, port, PHY_LONE_LED_CFG,
- PHY_L_LC_LEDT);
- break;
- default:
- skge_write32(hw, SKGEMAC_REG(port, TX_LED_VAL), 0);
- skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_T_OFF);
- }
+ /* Broadcom only */
+ xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
} else {
- skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
- skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER,
PHY_M_LED_MO_DUP(MO_LED_OFF) |
PHY_M_LED_MO_10(MO_LED_OFF) |
PHY_M_LED_MO_100(MO_LED_OFF) |
@@ -730,7 +687,7 @@
{
struct skge_port *skge = netdev_priv(dev);
- if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
+ if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
/* start blinking */
@@ -763,8 +720,6 @@
.set_pauseparam = skge_set_pauseparam,
.get_coalesce = skge_get_coalesce,
.set_coalesce = skge_set_coalesce,
- .get_tso = ethtool_op_get_tso,
- .set_tso = skge_set_tso,
.get_sg = ethtool_op_get_sg,
.set_sg = skge_set_sg,
.get_tx_csum = ethtool_op_get_tx_csum,
@@ -793,6 +748,7 @@
for (i = 0, e = ring->start, d = vaddr; i < ring->count; i++, e++, d++) {
e->desc = d;
+ e->skb = NULL;
if (i == ring->count - 1) {
e->next = ring->start;
d->next_offset = base;
@@ -806,24 +762,23 @@
return 0;
}
-/* Setup buffer for receiving */
-static inline int skge_rx_alloc(struct skge_port *skge,
- struct skge_element *e)
+static struct sk_buff *skge_rx_alloc(struct net_device *dev, unsigned int size)
{
- unsigned long bufsize = skge->netdev->mtu + ETH_HLEN; /* VLAN? */
- struct skge_rx_desc *rd = e->desc;
- struct sk_buff *skb;
- u64 map;
+ struct sk_buff *skb = dev_alloc_skb(size);
- skb = dev_alloc_skb(bufsize + NET_IP_ALIGN);
- if (unlikely(!skb)) {
- printk(KERN_DEBUG PFX "%s: out of memory for receive\n",
- skge->netdev->name);
- return -ENOMEM;
+ if (likely(skb)) {
+ skb->dev = dev;
+ skb_reserve(skb, NET_IP_ALIGN);
}
+ return skb;
+}
- skb->dev = skge->netdev;
- skb_reserve(skb, NET_IP_ALIGN);
+/* Allocate and setup a new buffer for receiving */
+static void skge_rx_setup(struct skge_port *skge, struct skge_element *e,
+ struct sk_buff *skb, unsigned int bufsize)
+{
+ struct skge_rx_desc *rd = e->desc;
+ u64 map;
map = pci_map_single(skge->hw->pdev, skb->data, bufsize,
PCI_DMA_FROMDEVICE);
@@ -841,55 +796,69 @@
rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | bufsize;
pci_unmap_addr_set(e, mapaddr, map);
pci_unmap_len_set(e, maplen, bufsize);
- return 0;
}
-/* Free all unused buffers in receive ring, assumes receiver stopped */
+/* Resume receiving using existing skb,
+ * Note: DMA address is not changed by chip.
+ * MTU not changed while receiver active.
+ */
+static void skge_rx_reuse(struct skge_element *e, unsigned int size)
+{
+ struct skge_rx_desc *rd = e->desc;
+
+ rd->csum2 = 0;
+ rd->csum2_start = ETH_HLEN;
+
+ wmb();
+
+ rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | size;
+}
+
+
+/* Free all buffers in receive ring, assumes receiver stopped */
static void skge_rx_clean(struct skge_port *skge)
{
struct skge_hw *hw = skge->hw;
struct skge_ring *ring = &skge->rx_ring;
struct skge_element *e;
- for (e = ring->to_clean; e != ring->to_use; e = e->next) {
+ e = ring->start;
+ do {
struct skge_rx_desc *rd = e->desc;
rd->control = 0;
-
- pci_unmap_single(hw->pdev,
- pci_unmap_addr(e, mapaddr),
- pci_unmap_len(e, maplen),
- PCI_DMA_FROMDEVICE);
- dev_kfree_skb(e->skb);
- e->skb = NULL;
- }
- ring->to_clean = e;
+ if (e->skb) {
+ pci_unmap_single(hw->pdev,
+ pci_unmap_addr(e, mapaddr),
+ pci_unmap_len(e, maplen),
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(e->skb);
+ e->skb = NULL;
+ }
+ } while ((e = e->next) != ring->start);
}
+
/* Allocate buffers for receive ring
- * For receive: to_use is refill location
- * to_clean is next received frame.
- *
- * if (to_use == to_clean)
- * then ring all frames in ring need buffers
- * if (to_use->next == to_clean)
- * then ring all frames in ring have buffers
+ * For receive: to_clean is next received frame.
*/
static int skge_rx_fill(struct skge_port *skge)
{
struct skge_ring *ring = &skge->rx_ring;
struct skge_element *e;
- int ret = 0;
+ unsigned int bufsize = skge->rx_buf_size;
- for (e = ring->to_use; e->next != ring->to_clean; e = e->next) {
- if (skge_rx_alloc(skge, e)) {
- ret = 1;
- break;
- }
+ e = ring->start;
+ do {
+ struct sk_buff *skb = skge_rx_alloc(skge->netdev, bufsize);
- }
- ring->to_use = e;
+ if (!skb)
+ return -ENOMEM;
- return ret;
+ skge_rx_setup(skge, e, skb, bufsize);
+ } while ( (e = e->next) != ring->start);
+
+ ring->to_clean = ring->start;
+ return 0;
}
static void skge_link_up(struct skge_port *skge)
@@ -919,50 +888,50 @@
printk(KERN_INFO PFX "%s: Link is down.\n", skge->netdev->name);
}
-static u16 skge_xm_phy_read(struct skge_hw *hw, int port, u16 reg)
+static u16 xm_phy_read(struct skge_hw *hw, int port, u16 reg)
{
int i;
u16 v;
- skge_xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
- v = skge_xm_read16(hw, port, XM_PHY_DATA);
- if (hw->phy_type != SK_PHY_XMAC) {
- for (i = 0; i < PHY_RETRIES; i++) {
- udelay(1);
- if (skge_xm_read16(hw, port, XM_MMU_CMD)
- & XM_MMU_PHY_RDY)
- goto ready;
- }
+ xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
+ v = xm_read16(hw, port, XM_PHY_DATA);
- printk(KERN_WARNING PFX "%s: phy read timed out\n",
- hw->dev[port]->name);
- return 0;
- ready:
- v = skge_xm_read16(hw, port, XM_PHY_DATA);
+ /* Need to wait for external PHY */
+ for (i = 0; i < PHY_RETRIES; i++) {
+ udelay(1);
+ if (xm_read16(hw, port, XM_MMU_CMD)
+ & XM_MMU_PHY_RDY)
+ goto ready;
}
+ printk(KERN_WARNING PFX "%s: phy read timed out\n",
+ hw->dev[port]->name);
+ return 0;
+ ready:
+ v = xm_read16(hw, port, XM_PHY_DATA);
+
return v;
}
-static void skge_xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
+static void xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
{
int i;
- skge_xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
+ xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
for (i = 0; i < PHY_RETRIES; i++) {
- if (!(skge_xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
+ if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
goto ready;
- cpu_relax();
+ udelay(1);
}
printk(KERN_WARNING PFX "%s: phy write failed to come ready\n",
hw->dev[port]->name);
ready:
- skge_xm_write16(hw, port, XM_PHY_DATA, val);
+ xm_write16(hw, port, XM_PHY_DATA, val);
for (i = 0; i < PHY_RETRIES; i++) {
udelay(1);
- if (!(skge_xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
+ if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
return;
}
printk(KERN_WARNING PFX "%s: phy write timed out\n",
@@ -999,34 +968,112 @@
static void genesis_reset(struct skge_hw *hw, int port)
{
- int i;
- u64 zero = 0;
+ const u8 zero[8] = { 0 };
/* reset the statistics module */
- skge_xm_write32(hw, port, XM_GP_PORT, XM_GP_RES_STAT);
- skge_xm_write16(hw, port, XM_IMSK, 0xffff); /* disable XMAC IRQs */
- skge_xm_write32(hw, port, XM_MODE, 0); /* clear Mode Reg */
- skge_xm_write16(hw, port, XM_TX_CMD, 0); /* reset TX CMD Reg */
- skge_xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */
+ xm_write32(hw, port, XM_GP_PORT, XM_GP_RES_STAT);
+ xm_write16(hw, port, XM_IMSK, 0xffff); /* disable XMAC IRQs */
+ xm_write32(hw, port, XM_MODE, 0); /* clear Mode Reg */
+ xm_write16(hw, port, XM_TX_CMD, 0); /* reset TX CMD Reg */
+ xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */
- /* disable all PHY IRQs */
- if (hw->phy_type == SK_PHY_BCOM)
- skge_xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff);
+ /* disable Broadcom PHY IRQ */
+ xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff);
- skge_xm_outhash(hw, port, XM_HSM, (u8 *) &zero);
- for (i = 0; i < 15; i++)
- skge_xm_outaddr(hw, port, XM_EXM(i), (u8 *) &zero);
- skge_xm_outhash(hw, port, XM_SRC_CHK, (u8 *) &zero);
+ xm_outhash(hw, port, XM_HSM, zero);
}
-static void genesis_mac_init(struct skge_hw *hw, int port)
+/* Convert mode to MII values */
+static const u16 phy_pause_map[] = {
+ [FLOW_MODE_NONE] = 0,
+ [FLOW_MODE_LOC_SEND] = PHY_AN_PAUSE_ASYM,
+ [FLOW_MODE_SYMMETRIC] = PHY_AN_PAUSE_CAP,
+ [FLOW_MODE_REM_SEND] = PHY_AN_PAUSE_CAP | PHY_AN_PAUSE_ASYM,
+};
+
+
+/* Check status of Broadcom phy link */
+static void bcom_check_link(struct skge_hw *hw, int port)
{
- struct skge_port *skge = netdev_priv(hw->dev[port]);
+ struct net_device *dev = hw->dev[port];
+ struct skge_port *skge = netdev_priv(dev);
+ u16 status;
+
+ /* read twice because of latch */
+ (void) xm_phy_read(hw, port, PHY_BCOM_STAT);
+ status = xm_phy_read(hw, port, PHY_BCOM_STAT);
+
+ pr_debug("bcom_check_link status=0x%x\n", status);
+
+ if ((status & PHY_ST_LSYNC) == 0) {
+ u16 cmd = xm_read16(hw, port, XM_MMU_CMD);
+ cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX);
+ xm_write16(hw, port, XM_MMU_CMD, cmd);
+ /* dummy read to ensure writing */
+ (void) xm_read16(hw, port, XM_MMU_CMD);
+
+ if (netif_carrier_ok(dev))
+ skge_link_down(skge);
+ } else {
+ if (skge->autoneg == AUTONEG_ENABLE &&
+ (status & PHY_ST_AN_OVER)) {
+ u16 lpa = xm_phy_read(hw, port, PHY_BCOM_AUNE_LP);
+ u16 aux = xm_phy_read(hw, port, PHY_BCOM_AUX_STAT);
+
+ if (lpa & PHY_B_AN_RF) {
+ printk(KERN_NOTICE PFX "%s: remote fault\n",
+ dev->name);
+ return;
+ }
+
+ /* Check Duplex mismatch */
+ switch(aux & PHY_B_AS_AN_RES_MSK) {
+ case PHY_B_RES_1000FD:
+ skge->duplex = DUPLEX_FULL;
+ break;
+ case PHY_B_RES_1000HD:
+ skge->duplex = DUPLEX_HALF;
+ break;
+ default:
+ printk(KERN_NOTICE PFX "%s: duplex mismatch\n",
+ dev->name);
+ return;
+ }
+
+
+ /* We are using IEEE 802.3z/D5.0 Table 37-4 */
+ switch (aux & PHY_B_AS_PAUSE_MSK) {
+ case PHY_B_AS_PAUSE_MSK:
+ skge->flow_control = FLOW_MODE_SYMMETRIC;
+ break;
+ case PHY_B_AS_PRR:
+ skge->flow_control = FLOW_MODE_REM_SEND;
+ break;
+ case PHY_B_AS_PRT:
+ skge->flow_control = FLOW_MODE_LOC_SEND;
+ break;
+ default:
+ skge->flow_control = FLOW_MODE_NONE;
+ }
+
+ skge->speed = SPEED_1000;
+ }
+
+ if (!netif_carrier_ok(dev))
+ genesis_link_up(skge);
+ }
+}
+
+/* Broadcom 5400 only supports giagabit! SysKonnect did not put an additional
+ * Phy on for 100 or 10Mbit operation
+ */
+static void bcom_phy_init(struct skge_port *skge, int jumbo)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
int i;
- u32 r;
- u16 id1;
- u16 ctrl1, ctrl2, ctrl3, ctrl4, ctrl5;
+ u16 id1, r, ext, ctl;
/* magic workaround patterns for Broadcom */
static const struct {
@@ -1042,16 +1089,120 @@
{ 0x17, 0x0013 }, { 0x15, 0x0A04 }, { 0x18, 0x0420 },
};
+ pr_debug("bcom_phy_init\n");
+
+ /* read Id from external PHY (all have the same address) */
+ id1 = xm_phy_read(hw, port, PHY_XMAC_ID1);
+
+ /* Optimize MDIO transfer by suppressing preamble. */
+ r = xm_read16(hw, port, XM_MMU_CMD);
+ r |= XM_MMU_NO_PRE;
+ xm_write16(hw, port, XM_MMU_CMD,r);
+
+ switch(id1) {
+ case PHY_BCOM_ID1_C0:
+ /*
+ * Workaround BCOM Errata for the C0 type.
+ * Write magic patterns to reserved registers.
+ */
+ for (i = 0; i < ARRAY_SIZE(C0hack); i++)
+ xm_phy_write(hw, port,
+ C0hack[i].reg, C0hack[i].val);
+
+ break;
+ case PHY_BCOM_ID1_A1:
+ /*
+ * Workaround BCOM Errata for the A1 type.
+ * Write magic patterns to reserved registers.
+ */
+ for (i = 0; i < ARRAY_SIZE(A1hack); i++)
+ xm_phy_write(hw, port,
+ A1hack[i].reg, A1hack[i].val);
+ break;
+ }
+
+ /*
+ * Workaround BCOM Errata (#10523) for all BCom PHYs.
+ * Disable Power Management after reset.
+ */
+ r = xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL);
+ r |= PHY_B_AC_DIS_PM;
+ xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r);
+
+ /* Dummy read */
+ xm_read16(hw, port, XM_ISRC);
+
+ ext = PHY_B_PEC_EN_LTR; /* enable tx led */
+ ctl = PHY_CT_SP1000; /* always 1000mbit */
+
+ if (skge->autoneg == AUTONEG_ENABLE) {
+ /*
+ * Workaround BCOM Errata #1 for the C5 type.
+ * 1000Base-T Link Acquisition Failure in Slave Mode
+ * Set Repeater/DTE bit 10 of the 1000Base-T Control Register
+ */
+ u16 adv = PHY_B_1000C_RD;
+ if (skge->advertising & ADVERTISED_1000baseT_Half)
+ adv |= PHY_B_1000C_AHD;
+ if (skge->advertising & ADVERTISED_1000baseT_Full)
+ adv |= PHY_B_1000C_AFD;
+ xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, adv);
+
+ ctl |= PHY_CT_ANE | PHY_CT_RE_CFG;
+ } else {
+ if (skge->duplex == DUPLEX_FULL)
+ ctl |= PHY_CT_DUP_MD;
+ /* Force to slave */
+ xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, PHY_B_1000C_MSE);
+ }
+
+ /* Set autonegotiation pause parameters */
+ xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV,
+ phy_pause_map[skge->flow_control] | PHY_AN_CSMA);
+
+ /* Handle Jumbo frames */
+ if (jumbo) {
+ xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL,
+ PHY_B_AC_TX_TST | PHY_B_AC_LONG_PACK);
+
+ ext |= PHY_B_PEC_HIGH_LA;
+
+ }
+
+ xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ext);
+ xm_phy_write(hw, port, PHY_BCOM_CTRL, ctl);
+
+ /* Use link status change interrrupt */
+ xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK);
+
+ bcom_check_link(hw, port);
+}
+
+static void genesis_mac_init(struct skge_hw *hw, int port)
+{
+ struct net_device *dev = hw->dev[port];
+ struct skge_port *skge = netdev_priv(dev);
+ int jumbo = hw->dev[port]->mtu > ETH_DATA_LEN;
+ int i;
+ u32 r;
+ const u8 zero[6] = { 0 };
+
+ /* Clear MIB counters */
+ xm_write16(hw, port, XM_STAT_CMD,
+ XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+ /* Clear two times according to Errata #3 */
+ xm_write16(hw, port, XM_STAT_CMD,
+ XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* initialize Rx, Tx and Link LED */
- skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_ON);
- skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
+ skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
+ skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
- skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_START);
- skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_START);
+ skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
+ skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
/* Unreset the XMAC. */
- skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
+ skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
/*
* Perform additional initialization for external PHYs,
@@ -1059,67 +1210,56 @@
* GMII mode.
*/
spin_lock_bh(&hw->phy_lock);
- if (hw->phy_type != SK_PHY_XMAC) {
- /* Take PHY out of reset. */
- r = skge_read32(hw, B2_GP_IO);
- if (port == 0)
- r |= GP_DIR_0|GP_IO_0;
- else
- r |= GP_DIR_2|GP_IO_2;
+ /* Take external Phy out of reset */
+ r = skge_read32(hw, B2_GP_IO);
+ if (port == 0)
+ r |= GP_DIR_0|GP_IO_0;
+ else
+ r |= GP_DIR_2|GP_IO_2;
- skge_write32(hw, B2_GP_IO, r);
- skge_read32(hw, B2_GP_IO);
+ skge_write32(hw, B2_GP_IO, r);
+ skge_read32(hw, B2_GP_IO);
+ spin_unlock_bh(&hw->phy_lock);
- /* Enable GMII mode on the XMAC. */
- skge_xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
+ /* Enable GMII interfac */
+ xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
- id1 = skge_xm_phy_read(hw, port, PHY_XMAC_ID1);
+ bcom_phy_init(skge, jumbo);
- /* Optimize MDIO transfer by suppressing preamble. */
- skge_xm_write16(hw, port, XM_MMU_CMD,
- skge_xm_read16(hw, port, XM_MMU_CMD)
- | XM_MMU_NO_PRE);
+ /* Set Station Address */
+ xm_outaddr(hw, port, XM_SA, dev->dev_addr);
- if (id1 == PHY_BCOM_ID1_C0) {
- /*
- * Workaround BCOM Errata for the C0 type.
- * Write magic patterns to reserved registers.
- */
- for (i = 0; i < ARRAY_SIZE(C0hack); i++)
- skge_xm_phy_write(hw, port,
- C0hack[i].reg, C0hack[i].val);
+ /* We don't use match addresses so clear */
+ for (i = 1; i < 16; i++)
+ xm_outaddr(hw, port, XM_EXM(i), zero);
- } else if (id1 == PHY_BCOM_ID1_A1) {
- /*
- * Workaround BCOM Errata for the A1 type.
- * Write magic patterns to reserved registers.
- */
- for (i = 0; i < ARRAY_SIZE(A1hack); i++)
- skge_xm_phy_write(hw, port,
- A1hack[i].reg, A1hack[i].val);
- }
-
- /*
- * Workaround BCOM Errata (#10523) for all BCom PHYs.
- * Disable Power Management after reset.
- */
- r = skge_xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL);
- skge_xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM);
- }
-
- /* Dummy read */
- skge_xm_read16(hw, port, XM_ISRC);
-
- r = skge_xm_read32(hw, port, XM_MODE);
- skge_xm_write32(hw, port, XM_MODE, r|XM_MD_CSA);
+ /* configure Rx High Water Mark (XM_RX_HI_WM) */
+ xm_write16(hw, port, XM_RX_HI_WM, 1450);
/* We don't need the FCS appended to the packet. */
- r = skge_xm_read16(hw, port, XM_RX_CMD);
- skge_xm_write16(hw, port, XM_RX_CMD, r | XM_RX_STRIP_FCS);
+ r = XM_RX_LENERR_OK | XM_RX_STRIP_FCS;
+ if (jumbo)
+ r |= XM_RX_BIG_PK_OK;
+
+ if (skge->duplex == DUPLEX_HALF) {
+ /*
+ * If in manual half duplex mode the other side might be in
+ * full duplex mode, so ignore if a carrier extension is not seen
+ * on frames received
+ */
+ r |= XM_RX_DIS_CEXT;
+ }
+ xm_write16(hw, port, XM_RX_CMD, r);
+
/* We want short frames padded to 60 bytes. */
- r = skge_xm_read16(hw, port, XM_TX_CMD);
- skge_xm_write16(hw, port, XM_TX_CMD, r | XM_TX_AUTO_PAD);
+ xm_write16(hw, port, XM_TX_CMD, XM_TX_AUTO_PAD);
+
+ /*
+ * Bump up the transmit threshold. This helps hold off transmit
+ * underruns when we're blasting traffic from both ports at once.
+ */
+ xm_write16(hw, port, XM_TX_THR, 512);
/*
* Enable the reception of all error frames. This is is
@@ -1135,19 +1275,22 @@
* case the XMAC will start transfering frames out of the
* RX FIFO as soon as the FIFO threshold is reached.
*/
- r = skge_xm_read32(hw, port, XM_MODE);
- skge_xm_write32(hw, port, XM_MODE,
- XM_MD_RX_CRCE|XM_MD_RX_LONG|XM_MD_RX_RUNT|
- XM_MD_RX_ERR|XM_MD_RX_IRLE);
+ xm_write32(hw, port, XM_MODE, XM_DEF_MODE);
- skge_xm_outaddr(hw, port, XM_SA, hw->dev[port]->dev_addr);
- skge_xm_outaddr(hw, port, XM_EXM(0), hw->dev[port]->dev_addr);
/*
- * Bump up the transmit threshold. This helps hold off transmit
- * underruns when we're blasting traffic from both ports at once.
+ * Initialize the Receive Counter Event Mask (XM_RX_EV_MSK)
+ * - Enable all bits excepting 'Octets Rx OK Low CntOv'
+ * and 'Octets Rx OK Hi Cnt Ov'.
*/
- skge_xm_write16(hw, port, XM_TX_THR, 512);
+ xm_write32(hw, port, XM_RX_EV_MSK, XMR_DEF_MSK);
+
+ /*
+ * Initialize the Transmit Counter Event Mask (XM_TX_EV_MSK)
+ * - Enable all bits excepting 'Octets Tx OK Low CntOv'
+ * and 'Octets Tx OK Hi Cnt Ov'.
+ */
+ xm_write32(hw, port, XM_TX_EV_MSK, XMT_DEF_MSK);
/* Configure MAC arbiter */
skge_write16(hw, B3_MA_TO_CTRL, MA_RST_CLR);
@@ -1164,137 +1307,30 @@
skge_write8(hw, B3_MA_RCINI_TX2, 0);
/* Configure Rx MAC FIFO */
- skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_RST_CLR);
- skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_ENA_TIM_PAT);
- skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_ENA_OP_MD);
+ skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_RST_CLR);
+ skge_write16(hw, SK_REG(port, RX_MFF_CTRL1), MFF_ENA_TIM_PAT);
+ skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_ENA_OP_MD);
/* Configure Tx MAC FIFO */
- skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_RST_CLR);
- skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF);
- skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_ENA_OP_MD);
+ skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_RST_CLR);
+ skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF);
+ skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_ENA_OP_MD);
- if (hw->dev[port]->mtu > ETH_DATA_LEN) {
+ if (jumbo) {
/* Enable frame flushing if jumbo frames used */
- skge_write16(hw, SKGEMAC_REG(port,RX_MFF_CTRL1), MFF_ENA_FLUSH);
+ skge_write16(hw, SK_REG(port,RX_MFF_CTRL1), MFF_ENA_FLUSH);
} else {
/* enable timeout timers if normal frames */
skge_write16(hw, B3_PA_CTRL,
- port == 0 ? PA_ENA_TO_TX1 : PA_ENA_TO_TX2);
+ (port == 0) ? PA_ENA_TO_TX1 : PA_ENA_TO_TX2);
}
-
-
- r = skge_xm_read16(hw, port, XM_RX_CMD);
- if (hw->dev[port]->mtu > ETH_DATA_LEN)
- skge_xm_write16(hw, port, XM_RX_CMD, r | XM_RX_BIG_PK_OK);
- else
- skge_xm_write16(hw, port, XM_RX_CMD, r & ~(XM_RX_BIG_PK_OK));
-
- switch (hw->phy_type) {
- case SK_PHY_XMAC:
- if (skge->autoneg == AUTONEG_ENABLE) {
- ctrl1 = PHY_X_AN_FD | PHY_X_AN_HD;
-
- switch (skge->flow_control) {
- case FLOW_MODE_NONE:
- ctrl1 |= PHY_X_P_NO_PAUSE;
- break;
- case FLOW_MODE_LOC_SEND:
- ctrl1 |= PHY_X_P_ASYM_MD;
- break;
- case FLOW_MODE_SYMMETRIC:
- ctrl1 |= PHY_X_P_SYM_MD;
- break;
- case FLOW_MODE_REM_SEND:
- ctrl1 |= PHY_X_P_BOTH_MD;
- break;
- }
-
- skge_xm_phy_write(hw, port, PHY_XMAC_AUNE_ADV, ctrl1);
- ctrl2 = PHY_CT_ANE | PHY_CT_RE_CFG;
- } else {
- ctrl2 = 0;
- if (skge->duplex == DUPLEX_FULL)
- ctrl2 |= PHY_CT_DUP_MD;
- }
-
- skge_xm_phy_write(hw, port, PHY_XMAC_CTRL, ctrl2);
- break;
-
- case SK_PHY_BCOM:
- ctrl1 = PHY_CT_SP1000;
- ctrl2 = 0;
- ctrl3 = PHY_SEL_TYPE;
- ctrl4 = PHY_B_PEC_EN_LTR;
- ctrl5 = PHY_B_AC_TX_TST;
-
- if (skge->autoneg == AUTONEG_ENABLE) {
- /*
- * Workaround BCOM Errata #1 for the C5 type.
- * 1000Base-T Link Acquisition Failure in Slave Mode
- * Set Repeater/DTE bit 10 of the 1000Base-T Control Register
- */
- ctrl2 |= PHY_B_1000C_RD;
- if (skge->advertising & ADVERTISED_1000baseT_Half)
- ctrl2 |= PHY_B_1000C_AHD;
- if (skge->advertising & ADVERTISED_1000baseT_Full)
- ctrl2 |= PHY_B_1000C_AFD;
-
- /* Set Flow-control capabilities */
- switch (skge->flow_control) {
- case FLOW_MODE_NONE:
- ctrl3 |= PHY_B_P_NO_PAUSE;
- break;
- case FLOW_MODE_LOC_SEND:
- ctrl3 |= PHY_B_P_ASYM_MD;
- break;
- case FLOW_MODE_SYMMETRIC:
- ctrl3 |= PHY_B_P_SYM_MD;
- break;
- case FLOW_MODE_REM_SEND:
- ctrl3 |= PHY_B_P_BOTH_MD;
- break;
- }
-
- /* Restart Auto-negotiation */
- ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG;
- } else {
- if (skge->duplex == DUPLEX_FULL)
- ctrl1 |= PHY_CT_DUP_MD;
-
- ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */
- }
-
- skge_xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, ctrl2);
- skge_xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, ctrl3);
-
- if (skge->netdev->mtu > ETH_DATA_LEN) {
- ctrl4 |= PHY_B_PEC_HIGH_LA;
- ctrl5 |= PHY_B_AC_LONG_PACK;
-
- skge_xm_phy_write(hw, port,PHY_BCOM_AUX_CTRL, ctrl5);
- }
-
- skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4);
- skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1);
- break;
- }
- spin_unlock_bh(&hw->phy_lock);
-
- /* Clear MIB counters */
- skge_xm_write16(hw, port, XM_STAT_CMD,
- XM_SC_CLR_RXC | XM_SC_CLR_TXC);
- /* Clear two times according to Errata #3 */
- skge_xm_write16(hw, port, XM_STAT_CMD,
- XM_SC_CLR_RXC | XM_SC_CLR_TXC);
-
- /* Start polling for link status */
- mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
}
static void genesis_stop(struct skge_port *skge)
{
struct skge_hw *hw = skge->hw;
int port = skge->port;
+ u32 reg;
/* Clear Tx packet arbiter timeout IRQ */
skge_write16(hw, B3_PA_CTRL,
@@ -1304,33 +1340,30 @@
* If the transfer stucks at the MAC the STOP command will not
* terminate if we don't flush the XMAC's transmit FIFO !
*/
- skge_xm_write32(hw, port, XM_MODE,
- skge_xm_read32(hw, port, XM_MODE)|XM_MD_FTF);
+ xm_write32(hw, port, XM_MODE,
+ xm_read32(hw, port, XM_MODE)|XM_MD_FTF);
/* Reset the MAC */
- skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST);
+ skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST);
/* For external PHYs there must be special handling */
- if (hw->phy_type != SK_PHY_XMAC) {
- u32 reg = skge_read32(hw, B2_GP_IO);
-
- if (port == 0) {
- reg |= GP_DIR_0;
- reg &= ~GP_IO_0;
- } else {
- reg |= GP_DIR_2;
- reg &= ~GP_IO_2;
- }
- skge_write32(hw, B2_GP_IO, reg);
- skge_read32(hw, B2_GP_IO);
+ reg = skge_read32(hw, B2_GP_IO);
+ if (port == 0) {
+ reg |= GP_DIR_0;
+ reg &= ~GP_IO_0;
+ } else {
+ reg |= GP_DIR_2;
+ reg &= ~GP_IO_2;
}
+ skge_write32(hw, B2_GP_IO, reg);
+ skge_read32(hw, B2_GP_IO);
- skge_xm_write16(hw, port, XM_MMU_CMD,
- skge_xm_read16(hw, port, XM_MMU_CMD)
+ xm_write16(hw, port, XM_MMU_CMD,
+ xm_read16(hw, port, XM_MMU_CMD)
& ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX));
- skge_xm_read16(hw, port, XM_MMU_CMD);
+ xm_read16(hw, port, XM_MMU_CMD);
}
@@ -1341,11 +1374,11 @@
int i;
unsigned long timeout = jiffies + HZ;
- skge_xm_write16(hw, port,
+ xm_write16(hw, port,
XM_STAT_CMD, XM_SC_SNP_TXC | XM_SC_SNP_RXC);
/* wait for update to complete */
- while (skge_xm_read16(hw, port, XM_STAT_CMD)
+ while (xm_read16(hw, port, XM_STAT_CMD)
& (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) {
if (time_after(jiffies, timeout))
break;
@@ -1353,68 +1386,60 @@
}
/* special case for 64 bit octet counter */
- data[0] = (u64) skge_xm_read32(hw, port, XM_TXO_OK_HI) << 32
- | skge_xm_read32(hw, port, XM_TXO_OK_LO);
- data[1] = (u64) skge_xm_read32(hw, port, XM_RXO_OK_HI) << 32
- | skge_xm_read32(hw, port, XM_RXO_OK_LO);
+ data[0] = (u64) xm_read32(hw, port, XM_TXO_OK_HI) << 32
+ | xm_read32(hw, port, XM_TXO_OK_LO);
+ data[1] = (u64) xm_read32(hw, port, XM_RXO_OK_HI) << 32
+ | xm_read32(hw, port, XM_RXO_OK_LO);
for (i = 2; i < ARRAY_SIZE(skge_stats); i++)
- data[i] = skge_xm_read32(hw, port, skge_stats[i].xmac_offset);
+ data[i] = xm_read32(hw, port, skge_stats[i].xmac_offset);
}
static void genesis_mac_intr(struct skge_hw *hw, int port)
{
struct skge_port *skge = netdev_priv(hw->dev[port]);
- u16 status = skge_xm_read16(hw, port, XM_ISRC);
+ u16 status = xm_read16(hw, port, XM_ISRC);
- pr_debug("genesis_intr status %x\n", status);
- if (hw->phy_type == SK_PHY_XMAC) {
- /* LInk down, start polling for state change */
- if (status & XM_IS_INP_ASS) {
- skge_xm_write16(hw, port, XM_IMSK,
- skge_xm_read16(hw, port, XM_IMSK) | XM_IS_INP_ASS);
- mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
- }
- else if (status & XM_IS_AND)
- mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
- }
+ if (netif_msg_intr(skge))
+ printk(KERN_DEBUG PFX "%s: mac interrupt status 0x%x\n",
+ skge->netdev->name, status);
if (status & XM_IS_TXF_UR) {
- skge_xm_write32(hw, port, XM_MODE, XM_MD_FTF);
+ xm_write32(hw, port, XM_MODE, XM_MD_FTF);
++skge->net_stats.tx_fifo_errors;
}
if (status & XM_IS_RXF_OV) {
- skge_xm_write32(hw, port, XM_MODE, XM_MD_FRF);
+ xm_write32(hw, port, XM_MODE, XM_MD_FRF);
++skge->net_stats.rx_fifo_errors;
}
}
-static void skge_gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
+static void gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
{
int i;
- skge_gma_write16(hw, port, GM_SMI_DATA, val);
- skge_gma_write16(hw, port, GM_SMI_CTRL,
+ gma_write16(hw, port, GM_SMI_DATA, val);
+ gma_write16(hw, port, GM_SMI_CTRL,
GM_SMI_CT_PHY_AD(hw->phy_addr) | GM_SMI_CT_REG_AD(reg));
for (i = 0; i < PHY_RETRIES; i++) {
udelay(1);
- if (!(skge_gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY))
+ if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY))
break;
}
}
-static u16 skge_gm_phy_read(struct skge_hw *hw, int port, u16 reg)
+static u16 gm_phy_read(struct skge_hw *hw, int port, u16 reg)
{
int i;
- skge_gma_write16(hw, port, GM_SMI_CTRL,
+ gma_write16(hw, port, GM_SMI_CTRL,
GM_SMI_CT_PHY_AD(hw->phy_addr)
| GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
for (i = 0; i < PHY_RETRIES; i++) {
udelay(1);
- if (skge_gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL)
+ if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL)
goto ready;
}
@@ -1422,24 +1447,7 @@
hw->dev[port]->name);
return 0;
ready:
- return skge_gma_read16(hw, port, GM_SMI_DATA);
-}
-
-static void genesis_link_down(struct skge_port *skge)
-{
- struct skge_hw *hw = skge->hw;
- int port = skge->port;
-
- pr_debug("genesis_link_down\n");
-
- skge_xm_write16(hw, port, XM_MMU_CMD,
- skge_xm_read16(hw, port, XM_MMU_CMD)
- & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX));
-
- /* dummy read to ensure writing */
- (void) skge_xm_read16(hw, port, XM_MMU_CMD);
-
- skge_link_down(skge);
+ return gma_read16(hw, port, GM_SMI_DATA);
}
static void genesis_link_up(struct skge_port *skge)
@@ -1450,7 +1458,7 @@
u32 mode, msk;
pr_debug("genesis_link_up\n");
- cmd = skge_xm_read16(hw, port, XM_MMU_CMD);
+ cmd = xm_read16(hw, port, XM_MMU_CMD);
/*
* enabling pause frame reception is required for 1000BT
@@ -1458,14 +1466,15 @@
*/
if (skge->flow_control == FLOW_MODE_NONE ||
skge->flow_control == FLOW_MODE_LOC_SEND)
+ /* Disable Pause Frame Reception */
cmd |= XM_MMU_IGN_PF;
else
/* Enable Pause Frame Reception */
cmd &= ~XM_MMU_IGN_PF;
- skge_xm_write16(hw, port, XM_MMU_CMD, cmd);
+ xm_write16(hw, port, XM_MMU_CMD, cmd);
- mode = skge_xm_read32(hw, port, XM_MODE);
+ mode = xm_read32(hw, port, XM_MODE);
if (skge->flow_control == FLOW_MODE_SYMMETRIC ||
skge->flow_control == FLOW_MODE_LOC_SEND) {
/*
@@ -1479,10 +1488,10 @@
/* XM_PAUSE_DA = '010000C28001' (default) */
/* XM_MAC_PTIME = 0xffff (maximum) */
/* remember this value is defined in big endian (!) */
- skge_xm_write16(hw, port, XM_MAC_PTIME, 0xffff);
+ xm_write16(hw, port, XM_MAC_PTIME, 0xffff);
mode |= XM_PAUSE_MODE;
- skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_ENA_PAUSE);
+ skge_write16(hw, SK_REG(port, RX_MFF_CTRL1), MFF_ENA_PAUSE);
} else {
/*
* disable pause frame generation is required for 1000BT
@@ -1491,125 +1500,68 @@
/* Disable Pause Mode in Mode Register */
mode &= ~XM_PAUSE_MODE;
- skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_DIS_PAUSE);
+ skge_write16(hw, SK_REG(port, RX_MFF_CTRL1), MFF_DIS_PAUSE);
}
- skge_xm_write32(hw, port, XM_MODE, mode);
+ xm_write32(hw, port, XM_MODE, mode);
msk = XM_DEF_MSK;
- if (hw->phy_type != SK_PHY_XMAC)
- msk |= XM_IS_INP_ASS; /* disable GP0 interrupt bit */
+ /* disable GP0 interrupt bit for external Phy */
+ msk |= XM_IS_INP_ASS;
- skge_xm_write16(hw, port, XM_IMSK, msk);
- skge_xm_read16(hw, port, XM_ISRC);
+ xm_write16(hw, port, XM_IMSK, msk);
+ xm_read16(hw, port, XM_ISRC);
/* get MMU Command Reg. */
- cmd = skge_xm_read16(hw, port, XM_MMU_CMD);
- if (hw->phy_type != SK_PHY_XMAC && skge->duplex == DUPLEX_FULL)
+ cmd = xm_read16(hw, port, XM_MMU_CMD);
+ if (skge->duplex == DUPLEX_FULL)
cmd |= XM_MMU_GMII_FD;
- if (hw->phy_type == SK_PHY_BCOM) {
- /*
- * Workaround BCOM Errata (#10523) for all BCom Phys
- * Enable Power Management after link up
- */
- skge_xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL,
- skge_xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL)
- & ~PHY_B_AC_DIS_PM);
- skge_xm_phy_write(hw, port, PHY_BCOM_INT_MASK,
- PHY_B_DEF_MSK);
- }
+ /*
+ * Workaround BCOM Errata (#10523) for all BCom Phys
+ * Enable Power Management after link up
+ */
+ xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL,
+ xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL)
+ & ~PHY_B_AC_DIS_PM);
+ xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK);
/* enable Rx/Tx */
- skge_xm_write16(hw, port, XM_MMU_CMD,
+ xm_write16(hw, port, XM_MMU_CMD,
cmd | XM_MMU_ENA_RX | XM_MMU_ENA_TX);
skge_link_up(skge);
}
-static void genesis_bcom_intr(struct skge_port *skge)
+static inline void bcom_phy_intr(struct skge_port *skge)
{
struct skge_hw *hw = skge->hw;
int port = skge->port;
- u16 stat = skge_xm_phy_read(hw, port, PHY_BCOM_INT_STAT);
+ u16 isrc;
- pr_debug("genesis_bcom intr stat=%x\n", stat);
+ isrc = xm_phy_read(hw, port, PHY_BCOM_INT_STAT);
+ if (netif_msg_intr(skge))
+ printk(KERN_DEBUG PFX "%s: phy interrupt status 0x%x\n",
+ skge->netdev->name, isrc);
+
+ if (isrc & PHY_B_IS_PSE)
+ printk(KERN_ERR PFX "%s: uncorrectable pair swap error\n",
+ hw->dev[port]->name);
/* Workaround BCom Errata:
* enable and disable loopback mode if "NO HCD" occurs.
*/
- if (stat & PHY_B_IS_NO_HDCL) {
- u16 ctrl = skge_xm_phy_read(hw, port, PHY_BCOM_CTRL);
- skge_xm_phy_write(hw, port, PHY_BCOM_CTRL,
+ if (isrc & PHY_B_IS_NO_HDCL) {
+ u16 ctrl = xm_phy_read(hw, port, PHY_BCOM_CTRL);
+ xm_phy_write(hw, port, PHY_BCOM_CTRL,
ctrl | PHY_CT_LOOP);
- skge_xm_phy_write(hw, port, PHY_BCOM_CTRL,
+ xm_phy_write(hw, port, PHY_BCOM_CTRL,
ctrl & ~PHY_CT_LOOP);
}
- stat = skge_xm_phy_read(hw, port, PHY_BCOM_STAT);
- if (stat & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) {
- u16 aux = skge_xm_phy_read(hw, port, PHY_BCOM_AUX_STAT);
- if ( !(aux & PHY_B_AS_LS) && netif_carrier_ok(skge->netdev))
- genesis_link_down(skge);
+ if (isrc & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE))
+ bcom_check_link(hw, port);
- else if (stat & PHY_B_IS_LST_CHANGE) {
- if (aux & PHY_B_AS_AN_C) {
- switch (aux & PHY_B_AS_AN_RES_MSK) {
- case PHY_B_RES_1000FD:
- skge->duplex = DUPLEX_FULL;
- break;
- case PHY_B_RES_1000HD:
- skge->duplex = DUPLEX_HALF;
- break;
- }
-
- switch (aux & PHY_B_AS_PAUSE_MSK) {
- case PHY_B_AS_PAUSE_MSK:
- skge->flow_control = FLOW_MODE_SYMMETRIC;
- break;
- case PHY_B_AS_PRR:
- skge->flow_control = FLOW_MODE_REM_SEND;
- break;
- case PHY_B_AS_PRT:
- skge->flow_control = FLOW_MODE_LOC_SEND;
- break;
- default:
- skge->flow_control = FLOW_MODE_NONE;
- }
- skge->speed = SPEED_1000;
- }
- genesis_link_up(skge);
- }
- else
- mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
- }
-}
-
-/* Perodic poll of phy status to check for link transistion */
-static void skge_link_timer(unsigned long __arg)
-{
- struct skge_port *skge = (struct skge_port *) __arg;
- struct skge_hw *hw = skge->hw;
- int port = skge->port;
-
- if (hw->chip_id != CHIP_ID_GENESIS || !netif_running(skge->netdev))
- return;
-
- spin_lock_bh(&hw->phy_lock);
- if (hw->phy_type == SK_PHY_BCOM)
- genesis_bcom_intr(skge);
- else {
- int i;
- for (i = 0; i < 3; i++)
- if (skge_xm_read16(hw, port, XM_ISRC) & XM_IS_INP_ASS)
- break;
-
- if (i == 3)
- mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
- else
- genesis_link_up(skge);
- }
- spin_unlock_bh(&hw->phy_lock);
}
/* Marvell Phy Initailization */
@@ -1621,31 +1573,27 @@
pr_debug("yukon_init\n");
if (skge->autoneg == AUTONEG_ENABLE) {
- u16 ectrl = skge_gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
+ u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
PHY_M_EC_MAC_S_MSK);
ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
- /* on PHY 88E1111 there is a change for downshift control */
- if (hw->chip_id == CHIP_ID_YUKON_EC)
- ectrl |= PHY_M_EC_M_DSC_2(0) | PHY_M_EC_DOWN_S_ENA;
- else
- ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
+ ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
- skge_gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
+ gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
}
- ctrl = skge_gm_phy_read(hw, port, PHY_MARV_CTRL);
+ ctrl = gm_phy_read(hw, port, PHY_MARV_CTRL);
if (skge->autoneg == AUTONEG_DISABLE)
ctrl &= ~PHY_CT_ANE;
ctrl |= PHY_CT_RESET;
- skge_gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
+ gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
ctrl = 0;
ct1000 = 0;
- adv = PHY_SEL_TYPE;
+ adv = PHY_AN_CSMA;
if (skge->autoneg == AUTONEG_ENABLE) {
if (iscopper(hw)) {
@@ -1661,41 +1609,12 @@
adv |= PHY_M_AN_10_FD;
if (skge->advertising & ADVERTISED_10baseT_Half)
adv |= PHY_M_AN_10_HD;
-
- /* Set Flow-control capabilities */
- switch (skge->flow_control) {
- case FLOW_MODE_NONE:
- adv |= PHY_B_P_NO_PAUSE;
- break;
- case FLOW_MODE_LOC_SEND:
- adv |= PHY_B_P_ASYM_MD;
- break;
- case FLOW_MODE_SYMMETRIC:
- adv |= PHY_B_P_SYM_MD;
- break;
- case FLOW_MODE_REM_SEND:
- adv |= PHY_B_P_BOTH_MD;
- break;
- }
- } else { /* special defines for FIBER (88E1011S only) */
+ } else /* special defines for FIBER (88E1011S only) */
adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD;
- /* Set Flow-control capabilities */
- switch (skge->flow_control) {
- case FLOW_MODE_NONE:
- adv |= PHY_M_P_NO_PAUSE_X;
- break;
- case FLOW_MODE_LOC_SEND:
- adv |= PHY_M_P_ASYM_MD_X;
- break;
- case FLOW_MODE_SYMMETRIC:
- adv |= PHY_M_P_SYM_MD_X;
- break;
- case FLOW_MODE_REM_SEND:
- adv |= PHY_M_P_BOTH_MD_X;
- break;
- }
- }
+ /* Set Flow-control capabilities */
+ adv |= phy_pause_map[skge->flow_control];
+
/* Restart Auto-negotiation */
ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
} else {
@@ -1717,36 +1636,23 @@
ctrl |= PHY_CT_RESET;
}
- if (hw->chip_id != CHIP_ID_YUKON_FE)
- skge_gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
+ gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
- skge_gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
- skge_gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
+ gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
+ gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
/* Setup Phy LED's */
ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
ledover = 0;
- if (hw->chip_id == CHIP_ID_YUKON_FE) {
- /* on 88E3082 these bits are at 11..9 (shifted left) */
- ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
+ ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
- skge_gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR,
- ((skge_gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR)
-
- & ~PHY_M_FELP_LED1_MSK)
- | PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL)));
- } else {
- /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
- ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
-
- /* turn off the Rx LED (LED_RX) */
- ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
- }
+ /* turn off the Rx LED (LED_RX) */
+ ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
/* disable blink mode (LED_DUPLEX) on collisions */
ctrl |= PHY_M_LEDC_DP_CTRL;
- skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
if (skge->autoneg == AUTONEG_DISABLE || skge->speed == SPEED_100) {
/* turn on 100 Mbps LED (LED_LINK100) */
@@ -1754,25 +1660,25 @@
}
if (ledover)
- skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
/* Enable phy interrupt on autonegotiation complete (or link up) */
if (skge->autoneg == AUTONEG_ENABLE)
- skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
else
- skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
}
static void yukon_reset(struct skge_hw *hw, int port)
{
- skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);/* disable PHY IRQs */
- skge_gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
- skge_gma_write16(hw, port, GM_MC_ADDR_H2, 0);
- skge_gma_write16(hw, port, GM_MC_ADDR_H3, 0);
- skge_gma_write16(hw, port, GM_MC_ADDR_H4, 0);
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);/* disable PHY IRQs */
+ gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
+ gma_write16(hw, port, GM_MC_ADDR_H2, 0);
+ gma_write16(hw, port, GM_MC_ADDR_H3, 0);
+ gma_write16(hw, port, GM_MC_ADDR_H4, 0);
- skge_gma_write16(hw, port, GM_RX_CTRL,
- skge_gma_read16(hw, port, GM_RX_CTRL)
+ gma_write16(hw, port, GM_RX_CTRL,
+ gma_read16(hw, port, GM_RX_CTRL)
| GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
}
@@ -1785,17 +1691,17 @@
/* WA code for COMA mode -- set PHY reset */
if (hw->chip_id == CHIP_ID_YUKON_LITE &&
- chip_rev(hw) == CHIP_REV_YU_LITE_A3)
+ hw->chip_rev == CHIP_REV_YU_LITE_A3)
skge_write32(hw, B2_GP_IO,
(skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9));
/* hard reset */
- skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), GPC_RST_SET);
- skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_RST_SET);
+ skge_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
+ skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
/* WA code for COMA mode -- clear PHY reset */
if (hw->chip_id == CHIP_ID_YUKON_LITE &&
- chip_rev(hw) == CHIP_REV_YU_LITE_A3)
+ hw->chip_rev == CHIP_REV_YU_LITE_A3)
skge_write32(hw, B2_GP_IO,
(skge_read32(hw, B2_GP_IO) | GP_DIR_9)
& ~GP_IO_9);
@@ -1806,13 +1712,13 @@
reg |= iscopper(hw) ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB;
/* Clear GMC reset */
- skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), reg | GPC_RST_SET);
- skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), reg | GPC_RST_CLR);
- skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR);
+ skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_SET);
+ skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_CLR);
+ skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR);
if (skge->autoneg == AUTONEG_DISABLE) {
reg = GM_GPCR_AU_ALL_DIS;
- skge_gma_write16(hw, port, GM_GP_CTRL,
- skge_gma_read16(hw, port, GM_GP_CTRL) | reg);
+ gma_write16(hw, port, GM_GP_CTRL,
+ gma_read16(hw, port, GM_GP_CTRL) | reg);
switch (skge->speed) {
case SPEED_1000:
@@ -1828,7 +1734,7 @@
reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL;
switch (skge->flow_control) {
case FLOW_MODE_NONE:
- skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
+ skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
reg |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
break;
case FLOW_MODE_LOC_SEND:
@@ -1836,7 +1742,7 @@
reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
}
- skge_gma_write16(hw, port, GM_GP_CTRL, reg);
+ gma_write16(hw, port, GM_GP_CTRL, reg);
skge_read16(hw, GMAC_IRQ_SRC);
spin_lock_bh(&hw->phy_lock);
@@ -1844,25 +1750,25 @@
spin_unlock_bh(&hw->phy_lock);
/* MIB clear */
- reg = skge_gma_read16(hw, port, GM_PHY_ADDR);
- skge_gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
+ reg = gma_read16(hw, port, GM_PHY_ADDR);
+ gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
for (i = 0; i < GM_MIB_CNT_SIZE; i++)
- skge_gma_read16(hw, port, GM_MIB_CNT_BASE + 8*i);
- skge_gma_write16(hw, port, GM_PHY_ADDR, reg);
+ gma_read16(hw, port, GM_MIB_CNT_BASE + 8*i);
+ gma_write16(hw, port, GM_PHY_ADDR, reg);
/* transmit control */
- skge_gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
+ gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
/* receive control reg: unicast + multicast + no FCS */
- skge_gma_write16(hw, port, GM_RX_CTRL,
+ gma_write16(hw, port, GM_RX_CTRL,
GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
/* transmit flow control */
- skge_gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
+ gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
/* transmit parameter */
- skge_gma_write16(hw, port, GM_TX_PARAM,
+ gma_write16(hw, port, GM_TX_PARAM,
TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
TX_IPG_JAM_DATA(TX_IPG_JAM_DEF));
@@ -1872,33 +1778,33 @@
if (hw->dev[port]->mtu > 1500)
reg |= GM_SMOD_JUMBO_ENA;
- skge_gma_write16(hw, port, GM_SERIAL_MODE, reg);
+ gma_write16(hw, port, GM_SERIAL_MODE, reg);
/* physical address: used for pause frames */
- skge_gm_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
+ gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
/* virtual address for data */
- skge_gm_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
+ gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
/* enable interrupt mask for counter overflows */
- skge_gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
- skge_gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
- skge_gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
+ gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
+ gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
+ gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
/* Initialize Mac Fifo */
/* Configure Rx MAC FIFO */
- skge_write16(hw, SKGEMAC_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK);
+ skge_write16(hw, SK_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK);
reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
if (hw->chip_id == CHIP_ID_YUKON_LITE &&
- chip_rev(hw) == CHIP_REV_YU_LITE_A3)
+ hw->chip_rev == CHIP_REV_YU_LITE_A3)
reg &= ~GMF_RX_F_FL_ON;
- skge_write8(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
- skge_write16(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), reg);
- skge_write16(hw, SKGEMAC_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
+ skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
+ skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg);
+ skge_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
/* Configure Tx MAC FIFO */
- skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
- skge_write16(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
+ skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
+ skge_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
}
static void yukon_stop(struct skge_port *skge)
@@ -1907,19 +1813,19 @@
int port = skge->port;
if (hw->chip_id == CHIP_ID_YUKON_LITE &&
- chip_rev(hw) == CHIP_REV_YU_LITE_A3) {
+ hw->chip_rev == CHIP_REV_YU_LITE_A3) {
skge_write32(hw, B2_GP_IO,
skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9);
}
- skge_gma_write16(hw, port, GM_GP_CTRL,
- skge_gma_read16(hw, port, GM_GP_CTRL)
+ gma_write16(hw, port, GM_GP_CTRL,
+ gma_read16(hw, port, GM_GP_CTRL)
& ~(GM_GPCR_RX_ENA|GM_GPCR_RX_ENA));
- skge_gma_read16(hw, port, GM_GP_CTRL);
+ gma_read16(hw, port, GM_GP_CTRL);
/* set GPHY Control reset */
- skge_gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET);
- skge_gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET);
+ gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET);
+ gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET);
}
static void yukon_get_stats(struct skge_port *skge, u64 *data)
@@ -1928,39 +1834,40 @@
int port = skge->port;
int i;
- data[0] = (u64) skge_gma_read32(hw, port, GM_TXO_OK_HI) << 32
- | skge_gma_read32(hw, port, GM_TXO_OK_LO);
- data[1] = (u64) skge_gma_read32(hw, port, GM_RXO_OK_HI) << 32
- | skge_gma_read32(hw, port, GM_RXO_OK_LO);
+ data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32
+ | gma_read32(hw, port, GM_TXO_OK_LO);
+ data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32
+ | gma_read32(hw, port, GM_RXO_OK_LO);
for (i = 2; i < ARRAY_SIZE(skge_stats); i++)
- data[i] = skge_gma_read32(hw, port,
+ data[i] = gma_read32(hw, port,
skge_stats[i].gma_offset);
}
static void yukon_mac_intr(struct skge_hw *hw, int port)
{
- struct skge_port *skge = netdev_priv(hw->dev[port]);
- u8 status = skge_read8(hw, SKGEMAC_REG(port, GMAC_IRQ_SRC));
+ struct net_device *dev = hw->dev[port];
+ struct skge_port *skge = netdev_priv(dev);
+ u8 status = skge_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
- pr_debug("yukon_intr status %x\n", status);
+ if (netif_msg_intr(skge))
+ printk(KERN_DEBUG PFX "%s: mac interrupt status 0x%x\n",
+ dev->name, status);
+
if (status & GM_IS_RX_FF_OR) {
++skge->net_stats.rx_fifo_errors;
- skge_gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO);
+ gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO);
}
if (status & GM_IS_TX_FF_UR) {
++skge->net_stats.tx_fifo_errors;
- skge_gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU);
+ gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU);
}
}
static u16 yukon_speed(const struct skge_hw *hw, u16 aux)
{
- if (hw->chip_id == CHIP_ID_YUKON_FE)
- return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10;
-
- switch(aux & PHY_M_PS_SPEED_MSK) {
+ switch (aux & PHY_M_PS_SPEED_MSK) {
case PHY_M_PS_SPEED_1000:
return SPEED_1000;
case PHY_M_PS_SPEED_100:
@@ -1981,15 +1888,15 @@
/* Enable Transmit FIFO Underrun */
skge_write8(hw, GMAC_IRQ_MSK, GMAC_DEF_MSK);
- reg = skge_gma_read16(hw, port, GM_GP_CTRL);
+ reg = gma_read16(hw, port, GM_GP_CTRL);
if (skge->duplex == DUPLEX_FULL || skge->autoneg == AUTONEG_ENABLE)
reg |= GM_GPCR_DUP_FULL;
/* enable Rx/Tx */
reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
- skge_gma_write16(hw, port, GM_GP_CTRL, reg);
+ gma_write16(hw, port, GM_GP_CTRL, reg);
- skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
skge_link_up(skge);
}
@@ -1999,16 +1906,15 @@
int port = skge->port;
pr_debug("yukon_link_down\n");
- skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
- skge_gm_phy_write(hw, port, GM_GP_CTRL,
- skge_gm_phy_read(hw, port, GM_GP_CTRL)
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
+ gm_phy_write(hw, port, GM_GP_CTRL,
+ gm_phy_read(hw, port, GM_GP_CTRL)
& ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA));
- if (hw->chip_id != CHIP_ID_YUKON_FE &&
- skge->flow_control == FLOW_MODE_REM_SEND) {
+ if (skge->flow_control == FLOW_MODE_REM_SEND) {
/* restore Asymmetric Pause bit */
- skge_gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
- skge_gm_phy_read(hw, port,
+ gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
+ gm_phy_read(hw, port,
PHY_MARV_AUNE_ADV)
| PHY_M_AN_ASP);
@@ -2027,20 +1933,21 @@
const char *reason = NULL;
u16 istatus, phystat;
- istatus = skge_gm_phy_read(hw, port, PHY_MARV_INT_STAT);
- phystat = skge_gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
- pr_debug("yukon phy intr istat=%x phy_stat=%x\n", istatus, phystat);
+ istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
+ phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
+
+ if (netif_msg_intr(skge))
+ printk(KERN_DEBUG PFX "%s: phy interrupt status 0x%x 0x%x\n",
+ skge->netdev->name, istatus, phystat);
if (istatus & PHY_M_IS_AN_COMPL) {
- if (skge_gm_phy_read(hw, port, PHY_MARV_AUNE_LP)
+ if (gm_phy_read(hw, port, PHY_MARV_AUNE_LP)
& PHY_M_AN_RF) {
reason = "remote fault";
goto failed;
}
- if (!(hw->chip_id == CHIP_ID_YUKON_FE || hw->chip_id == CHIP_ID_YUKON_EC)
- && (skge_gm_phy_read(hw, port, PHY_MARV_1000T_STAT)
- & PHY_B_1000S_MSF)) {
+ if (gm_phy_read(hw, port, PHY_MARV_1000T_STAT) & PHY_B_1000S_MSF) {
reason = "master/slave fault";
goto failed;
}
@@ -2054,10 +1961,6 @@
? DUPLEX_FULL : DUPLEX_HALF;
skge->speed = yukon_speed(hw, phystat);
- /* Tx & Rx Pause Enabled bits are at 9..8 */
- if (hw->chip_id == CHIP_ID_YUKON_XL)
- phystat >>= 6;
-
/* We are using IEEE 802.3z/D5.0 Table 37-4 */
switch (phystat & PHY_M_PS_PAUSE_MSK) {
case PHY_M_PS_PAUSE_MSK:
@@ -2075,9 +1978,9 @@
if (skge->flow_control == FLOW_MODE_NONE ||
(skge->speed < SPEED_1000 && skge->duplex == DUPLEX_HALF))
- skge_write8(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
+ skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
else
- skge_write8(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
+ skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
yukon_link_up(skge);
return;
}
@@ -2161,6 +2064,12 @@
if (netif_msg_ifup(skge))
printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
+ if (dev->mtu > RX_BUF_SIZE)
+ skge->rx_buf_size = dev->mtu + ETH_HLEN + NET_IP_ALIGN;
+ else
+ skge->rx_buf_size = RX_BUF_SIZE;
+
+
rx_size = skge->rx_ring.count * sizeof(struct skge_rx_desc);
tx_size = skge->tx_ring.count * sizeof(struct skge_tx_desc);
skge->mem_size = tx_size + rx_size;
@@ -2173,7 +2082,8 @@
if ((err = skge_ring_alloc(&skge->rx_ring, skge->mem, skge->dma)))
goto free_pci_mem;
- if (skge_rx_fill(skge))
+ err = skge_rx_fill(skge);
+ if (err)
goto free_rx_ring;
if ((err = skge_ring_alloc(&skge->tx_ring, skge->mem + rx_size,
@@ -2182,6 +2092,10 @@
skge->tx_avail = skge->tx_ring.count - 1;
+ /* Enable IRQ from port */
+ hw->intr_mask |= portirqmask[port];
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+
/* Initialze MAC */
if (hw->chip_id == CHIP_ID_GENESIS)
genesis_mac_init(hw, port);
@@ -2189,7 +2103,7 @@
yukon_mac_init(hw, port);
/* Configure RAMbuffers */
- chunk = hw->ram_size / (isdualport(hw) ? 4 : 2);
+ chunk = hw->ram_size / ((hw->ports + 1)*2);
ram_addr = hw->ram_offset + 2 * chunk * port;
skge_ramset(hw, rxqaddr[port], ram_addr, chunk);
@@ -2227,7 +2141,6 @@
netif_stop_queue(dev);
del_timer_sync(&skge->led_blink);
- del_timer_sync(&skge->link_check);
/* Stop transmitter */
skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
@@ -2240,12 +2153,12 @@
yukon_stop(skge);
/* Disable Force Sync bit and Enable Alloc bit */
- skge_write8(hw, SKGEMAC_REG(port, TXA_CTRL),
+ skge_write8(hw, SK_REG(port, TXA_CTRL),
TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
/* Stop Interval Timer and Limit Counter of Tx Arbiter */
- skge_write32(hw, SKGEMAC_REG(port, TXA_ITI_INI), 0L);
- skge_write32(hw, SKGEMAC_REG(port, TXA_LIM_INI), 0L);
+ skge_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
+ skge_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
/* Reset PCI FIFO */
skge_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_SET_RESET);
@@ -2260,13 +2173,13 @@
skge_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_SET_RESET);
if (hw->chip_id == CHIP_ID_GENESIS) {
- skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_RST_SET);
- skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_RST_SET);
- skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_STOP);
- skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_STOP);
+ skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_RST_SET);
+ skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_RST_SET);
+ skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_STOP);
+ skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_STOP);
} else {
- skge_write8(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
+ skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+ skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
}
/* turn off led's */
@@ -2299,10 +2212,10 @@
local_irq_save(flags);
if (!spin_trylock(&skge->tx_lock)) {
- /* Collision - tell upper layer to requeue */
- local_irq_restore(flags);
- return NETDEV_TX_LOCKED;
- }
+ /* Collision - tell upper layer to requeue */
+ local_irq_restore(flags);
+ return NETDEV_TX_LOCKED;
+ }
if (unlikely(skge->tx_avail < skb_shinfo(skb)->nr_frags +1)) {
netif_stop_queue(dev);
@@ -2333,7 +2246,7 @@
* does. Looks like hardware is wrong?
*/
if (ip->protocol == IPPROTO_UDP
- && chip_rev(hw) == 0 && hw->chip_id == CHIP_ID_YUKON)
+ && hw->chip_rev == 0 && hw->chip_id == CHIP_ID_YUKON)
control = BMU_TCP_CHECK;
else
control = BMU_UDP_CHECK;
@@ -2394,6 +2307,7 @@
static inline void skge_tx_free(struct skge_hw *hw, struct skge_element *e)
{
+ /* This ring element can be skb or fragment */
if (e->skb) {
pci_unmap_single(hw->pdev,
pci_unmap_addr(e, mapaddr),
@@ -2438,16 +2352,17 @@
static int skge_change_mtu(struct net_device *dev, int new_mtu)
{
int err = 0;
+ int running = netif_running(dev);
- if(new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
+ if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
return -EINVAL;
- dev->mtu = new_mtu;
- if (netif_running(dev)) {
+ if (running)
skge_down(dev);
+ dev->mtu = new_mtu;
+ if (running)
skge_up(dev);
- }
return err;
}
@@ -2462,7 +2377,9 @@
u32 mode;
u8 filter[8];
- mode = skge_xm_read32(hw, port, XM_MODE);
+ pr_debug("genesis_set_multicast flags=%x count=%d\n", dev->flags, dev->mc_count);
+
+ mode = xm_read32(hw, port, XM_MODE);
mode |= XM_MD_ENA_HASH;
if (dev->flags & IFF_PROMISC)
mode |= XM_MD_ENA_PROM;
@@ -2473,17 +2390,16 @@
memset(filter, 0xff, sizeof(filter));
else {
memset(filter, 0, sizeof(filter));
- for(i = 0; list && i < count; i++, list = list->next) {
- u32 crc = crc32_le(~0, list->dmi_addr, ETH_ALEN);
- u8 bit = 63 - (crc & 63);
-
+ for (i = 0; list && i < count; i++, list = list->next) {
+ u32 crc, bit;
+ crc = ether_crc_le(ETH_ALEN, list->dmi_addr);
+ bit = ~crc & 0x3f;
filter[bit/8] |= 1 << (bit%8);
}
}
- skge_xm_outhash(hw, port, XM_HSM, filter);
-
- skge_xm_write32(hw, port, XM_MODE, mode);
+ xm_write32(hw, port, XM_MODE, mode);
+ xm_outhash(hw, port, XM_HSM, filter);
}
static void yukon_set_multicast(struct net_device *dev)
@@ -2497,7 +2413,7 @@
memset(filter, 0, sizeof(filter));
- reg = skge_gma_read16(hw, port, GM_RX_CTRL);
+ reg = gma_read16(hw, port, GM_RX_CTRL);
reg |= GM_RXCR_UCF_ENA;
if (dev->flags & IFF_PROMISC) /* promiscious */
@@ -2510,23 +2426,23 @@
int i;
reg |= GM_RXCR_MCF_ENA;
- for(i = 0; list && i < dev->mc_count; i++, list = list->next) {
+ for (i = 0; list && i < dev->mc_count; i++, list = list->next) {
u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f;
filter[bit/8] |= 1 << (bit%8);
}
}
- skge_gma_write16(hw, port, GM_MC_ADDR_H1,
+ gma_write16(hw, port, GM_MC_ADDR_H1,
(u16)filter[0] | ((u16)filter[1] << 8));
- skge_gma_write16(hw, port, GM_MC_ADDR_H2,
+ gma_write16(hw, port, GM_MC_ADDR_H2,
(u16)filter[2] | ((u16)filter[3] << 8));
- skge_gma_write16(hw, port, GM_MC_ADDR_H3,
+ gma_write16(hw, port, GM_MC_ADDR_H3,
(u16)filter[4] | ((u16)filter[5] << 8));
- skge_gma_write16(hw, port, GM_MC_ADDR_H4,
+ gma_write16(hw, port, GM_MC_ADDR_H4,
(u16)filter[6] | ((u16)filter[7] << 8));
- skge_gma_write16(hw, port, GM_RX_CTRL, reg);
+ gma_write16(hw, port, GM_RX_CTRL, reg);
}
static inline int bad_phy_status(const struct skge_hw *hw, u32 status)
@@ -2545,28 +2461,76 @@
printk(KERN_DEBUG PFX "%s: rx err, slot %d control 0x%x status 0x%x\n",
skge->netdev->name, slot, control, status);
- if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF)
- || (control & BMU_BBC) > skge->netdev->mtu + VLAN_ETH_HLEN)
+ if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF))
skge->net_stats.rx_length_errors++;
- else {
- if (skge->hw->chip_id == CHIP_ID_GENESIS) {
- if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR))
- skge->net_stats.rx_length_errors++;
- if (status & XMR_FS_FRA_ERR)
- skge->net_stats.rx_frame_errors++;
- if (status & XMR_FS_FCS_ERR)
- skge->net_stats.rx_crc_errors++;
- } else {
- if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE))
- skge->net_stats.rx_length_errors++;
- if (status & GMR_FS_FRAGMENT)
- skge->net_stats.rx_frame_errors++;
- if (status & GMR_FS_CRC_ERR)
- skge->net_stats.rx_crc_errors++;
- }
+ else if (skge->hw->chip_id == CHIP_ID_GENESIS) {
+ if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR))
+ skge->net_stats.rx_length_errors++;
+ if (status & XMR_FS_FRA_ERR)
+ skge->net_stats.rx_frame_errors++;
+ if (status & XMR_FS_FCS_ERR)
+ skge->net_stats.rx_crc_errors++;
+ } else {
+ if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE))
+ skge->net_stats.rx_length_errors++;
+ if (status & GMR_FS_FRAGMENT)
+ skge->net_stats.rx_frame_errors++;
+ if (status & GMR_FS_CRC_ERR)
+ skge->net_stats.rx_crc_errors++;
}
}
+/* Get receive buffer from descriptor.
+ * Handles copy of small buffers and reallocation failures
+ */
+static inline struct sk_buff *skge_rx_get(struct skge_port *skge,
+ struct skge_element *e,
+ unsigned int len)
+{
+ struct sk_buff *nskb, *skb;
+
+ if (len < RX_COPY_THRESHOLD) {
+ nskb = skge_rx_alloc(skge->netdev, len + NET_IP_ALIGN);
+ if (unlikely(!nskb))
+ return NULL;
+
+ pci_dma_sync_single_for_cpu(skge->hw->pdev,
+ pci_unmap_addr(e, mapaddr),
+ len, PCI_DMA_FROMDEVICE);
+ memcpy(nskb->data, e->skb->data, len);
+ pci_dma_sync_single_for_device(skge->hw->pdev,
+ pci_unmap_addr(e, mapaddr),
+ len, PCI_DMA_FROMDEVICE);
+
+ if (skge->rx_csum) {
+ struct skge_rx_desc *rd = e->desc;
+ nskb->csum = le16_to_cpu(rd->csum2);
+ nskb->ip_summed = CHECKSUM_HW;
+ }
+ skge_rx_reuse(e, skge->rx_buf_size);
+ return nskb;
+ } else {
+ nskb = skge_rx_alloc(skge->netdev, skge->rx_buf_size);
+ if (unlikely(!nskb))
+ return NULL;
+
+ pci_unmap_single(skge->hw->pdev,
+ pci_unmap_addr(e, mapaddr),
+ pci_unmap_len(e, maplen),
+ PCI_DMA_FROMDEVICE);
+ skb = e->skb;
+ if (skge->rx_csum) {
+ struct skge_rx_desc *rd = e->desc;
+ skb->csum = le16_to_cpu(rd->csum2);
+ skb->ip_summed = CHECKSUM_HW;
+ }
+
+ skge_rx_setup(skge, e, nskb, skge->rx_buf_size);
+ return skb;
+ }
+}
+
+
static int skge_poll(struct net_device *dev, int *budget)
{
struct skge_port *skge = netdev_priv(dev);
@@ -2575,13 +2539,12 @@
struct skge_element *e;
unsigned int to_do = min(dev->quota, *budget);
unsigned int work_done = 0;
- int done;
- static const u32 irqmask[] = { IS_PORT_1, IS_PORT_2 };
- for (e = ring->to_clean; e != ring->to_use && work_done < to_do;
- e = e->next) {
+ pr_debug("skge_poll\n");
+
+ for (e = ring->to_clean; work_done < to_do; e = e->next) {
struct skge_rx_desc *rd = e->desc;
- struct sk_buff *skb = e->skb;
+ struct sk_buff *skb;
u32 control, len, status;
rmb();
@@ -2590,19 +2553,12 @@
break;
len = control & BMU_BBC;
- e->skb = NULL;
-
- pci_unmap_single(hw->pdev,
- pci_unmap_addr(e, mapaddr),
- pci_unmap_len(e, maplen),
- PCI_DMA_FROMDEVICE);
-
status = rd->status;
- if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF)
- || len > dev->mtu + VLAN_ETH_HLEN
- || bad_phy_status(hw, status)) {
+
+ if (unlikely((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF)
+ || bad_phy_status(hw, status))) {
skge_rx_error(skge, e - ring->start, control, status);
- dev_kfree_skb(skb);
+ skge_rx_reuse(e, skge->rx_buf_size);
continue;
}
@@ -2610,43 +2566,37 @@
printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n",
dev->name, e - ring->start, rd->status, len);
- skb_put(skb, len);
- skb->protocol = eth_type_trans(skb, dev);
+ skb = skge_rx_get(skge, e, len);
+ if (likely(skb)) {
+ skb_put(skb, len);
+ skb->protocol = eth_type_trans(skb, dev);
- if (skge->rx_csum) {
- skb->csum = le16_to_cpu(rd->csum2);
- skb->ip_summed = CHECKSUM_HW;
- }
+ dev->last_rx = jiffies;
+ netif_receive_skb(skb);
- dev->last_rx = jiffies;
- netif_receive_skb(skb);
-
- ++work_done;
+ ++work_done;
+ } else
+ skge_rx_reuse(e, skge->rx_buf_size);
}
ring->to_clean = e;
- *budget -= work_done;
- dev->quota -= work_done;
- done = work_done < to_do;
-
- if (skge_rx_fill(skge))
- done = 0;
-
/* restart receiver */
wmb();
skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR),
CSR_START | CSR_IRQ_CL_F);
- if (done) {
- local_irq_disable();
- hw->intr_mask |= irqmask[skge->port];
- /* Order is important since data can get interrupted */
- skge_write32(hw, B0_IMSK, hw->intr_mask);
- __netif_rx_complete(dev);
- local_irq_enable();
- }
+ *budget -= work_done;
+ dev->quota -= work_done;
- return !done;
+ if (work_done >= to_do)
+ return 1; /* not done */
+
+ local_irq_disable();
+ __netif_rx_complete(dev);
+ hw->intr_mask |= portirqmask[skge->port];
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+ local_irq_enable();
+ return 0;
}
static inline void skge_tx_intr(struct net_device *dev)
@@ -2657,7 +2607,7 @@
struct skge_element *e;
spin_lock(&skge->tx_lock);
- for(e = ring->to_clean; e != ring->to_use; e = e->next) {
+ for (e = ring->to_clean; e != ring->to_use; e = e->next) {
struct skge_tx_desc *td = e->desc;
u32 control;
@@ -2690,12 +2640,12 @@
: (port == 0 ? "(port A)": "(port B"));
if (hw->chip_id == CHIP_ID_GENESIS)
- skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1),
+ skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
MFF_CLR_PERR);
else
/* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */
- skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T),
- (hw->chip_id == CHIP_ID_YUKON && chip_rev(hw) == 0)
+ skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T),
+ (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev == 0)
? GMF_CLI_TX_FC : GMF_CLI_TX_PE);
}
@@ -2703,16 +2653,16 @@
{
u16 status;
- status = skge_read16(hw, SKGEPCI_REG(PCI_STATUS));
+ pci_read_config_word(hw->pdev, PCI_STATUS, &status);
skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- skge_write16(hw, SKGEPCI_REG(PCI_STATUS),
- status | PCI_STATUS_ERROR_BITS);
+ pci_write_config_word(hw->pdev, PCI_STATUS,
+ status | PCI_STATUS_ERROR_BITS);
skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
static void skge_mac_intr(struct skge_hw *hw, int port)
{
- if (hw->chip_id == CHIP_ID_GENESIS)
+ if (hw->chip_id == CHIP_ID_GENESIS)
genesis_mac_intr(hw, port);
else
yukon_mac_intr(hw, port);
@@ -2726,9 +2676,9 @@
if (hw->chip_id == CHIP_ID_GENESIS) {
/* clear xmac errors */
if (hwstatus & (IS_NO_STAT_M1|IS_NO_TIST_M1))
- skge_write16(hw, SKGEMAC_REG(0, RX_MFF_CTRL1), MFF_CLR_INSTAT);
+ skge_write16(hw, SK_REG(0, RX_MFF_CTRL1), MFF_CLR_INSTAT);
if (hwstatus & (IS_NO_STAT_M2|IS_NO_TIST_M2))
- skge_write16(hw, SKGEMAC_REG(0, RX_MFF_CTRL2), MFF_CLR_INSTAT);
+ skge_write16(hw, SK_REG(0, RX_MFF_CTRL2), MFF_CLR_INSTAT);
} else {
/* Timestamp (unused) overflow */
if (hwstatus & IS_IRQ_TIST_OV)
@@ -2803,8 +2753,8 @@
if (hw->chip_id != CHIP_ID_GENESIS)
yukon_phy_intr(skge);
- else if (hw->phy_type == SK_PHY_BCOM)
- genesis_bcom_intr(skge);
+ else
+ bcom_phy_intr(skge);
}
}
spin_unlock(&hw->phy_lock);
@@ -2824,19 +2774,14 @@
return IRQ_NONE;
status &= hw->intr_mask;
-
- if ((status & IS_R1_F) && netif_rx_schedule_prep(hw->dev[0])) {
- status &= ~IS_R1_F;
+ if (status & IS_R1_F) {
hw->intr_mask &= ~IS_R1_F;
- skge_write32(hw, B0_IMSK, hw->intr_mask);
- __netif_rx_schedule(hw->dev[0]);
+ netif_rx_schedule(hw->dev[0]);
}
- if ((status & IS_R2_F) && netif_rx_schedule_prep(hw->dev[1])) {
- status &= ~IS_R2_F;
+ if (status & IS_R2_F) {
hw->intr_mask &= ~IS_R2_F;
- skge_write32(hw, B0_IMSK, hw->intr_mask);
- __netif_rx_schedule(hw->dev[1]);
+ netif_rx_schedule(hw->dev[1]);
}
if (status & IS_XA1_F)
@@ -2845,9 +2790,27 @@
if (status & IS_XA2_F)
skge_tx_intr(hw->dev[1]);
+ if (status & IS_PA_TO_RX1) {
+ struct skge_port *skge = netdev_priv(hw->dev[0]);
+ ++skge->net_stats.rx_over_errors;
+ skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_RX1);
+ }
+
+ if (status & IS_PA_TO_RX2) {
+ struct skge_port *skge = netdev_priv(hw->dev[1]);
+ ++skge->net_stats.rx_over_errors;
+ skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_RX2);
+ }
+
+ if (status & IS_PA_TO_TX1)
+ skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_TX1);
+
+ if (status & IS_PA_TO_TX2)
+ skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_TX2);
+
if (status & IS_MAC1)
skge_mac_intr(hw, 0);
-
+
if (status & IS_MAC2)
skge_mac_intr(hw, 1);
@@ -2859,8 +2822,7 @@
tasklet_schedule(&hw->ext_tasklet);
}
- if (status)
- skge_write32(hw, B0_IMSK, hw->intr_mask);
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
return IRQ_HANDLED;
}
@@ -2904,9 +2866,6 @@
{ CHIP_ID_YUKON, "Yukon" },
{ CHIP_ID_YUKON_LITE, "Yukon-Lite"},
{ CHIP_ID_YUKON_LP, "Yukon-LP"},
- { CHIP_ID_YUKON_XL, "Yukon-2 XL"},
- { CHIP_ID_YUKON_EC, "YUKON-2 EC"},
- { CHIP_ID_YUKON_FE, "YUKON-2 FE"},
};
static const char *skge_board_name(const struct skge_hw *hw)
@@ -2930,8 +2889,8 @@
static int skge_reset(struct skge_hw *hw)
{
u16 ctst;
- u8 t8;
- int i, ports;
+ u8 t8, mac_cfg;
+ int i;
ctst = skge_read16(hw, B0_CTST);
@@ -2952,12 +2911,9 @@
hw->phy_type = skge_read8(hw, B2_E_1) & 0xf;
hw->pmd_type = skge_read8(hw, B2_PMD_TYP);
- switch(hw->chip_id) {
+ switch (hw->chip_id) {
case CHIP_ID_GENESIS:
switch (hw->phy_type) {
- case SK_PHY_XMAC:
- hw->phy_addr = PHY_ADDR_XMAC;
- break;
case SK_PHY_BCOM:
hw->phy_addr = PHY_ADDR_BCOM;
break;
@@ -2986,8 +2942,9 @@
return -EOPNOTSUPP;
}
- hw->mac_cfg = skge_read8(hw, B2_MAC_CFG);
- ports = isdualport(hw) ? 2 : 1;
+ mac_cfg = skge_read8(hw, B2_MAC_CFG);
+ hw->ports = (mac_cfg & CFG_SNG_MAC) ? 1 : 2;
+ hw->chip_rev = (mac_cfg & CFG_CHIP_R_MSK) >> 4;
/* read the adapters RAM size */
t8 = skge_read8(hw, B2_E_0);
@@ -3010,9 +2967,9 @@
/* switch power to VCC (WA for VAUX problem) */
skge_write8(hw, B0_POWER_CTRL,
PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
- for (i = 0; i < ports; i++) {
- skge_write16(hw, SKGEMAC_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
- skge_write16(hw, SKGEMAC_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
+ for (i = 0; i < hw->ports; i++) {
+ skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
+ skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
}
}
@@ -3022,8 +2979,8 @@
skge_write8(hw, B0_LED, LED_STAT_ON);
/* enable the Tx Arbiters */
- for (i = 0; i < ports; i++)
- skge_write8(hw, SKGEMAC_REG(i, TXA_CTRL), TXA_ENA_ARB);
+ for (i = 0; i < hw->ports; i++)
+ skge_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB);
/* Initialize ram interface */
skge_write16(hw, B3_RI_CTRL, RI_RST_CLR);
@@ -3050,16 +3007,14 @@
skge_write32(hw, B2_IRQM_INI, skge_usecs2clk(hw, 100));
skge_write32(hw, B2_IRQM_CTRL, TIM_START);
- hw->intr_mask = IS_HW_ERR | IS_EXT_REG | IS_PORT_1;
- if (isdualport(hw))
- hw->intr_mask |= IS_PORT_2;
+ hw->intr_mask = IS_HW_ERR | IS_EXT_REG;
skge_write32(hw, B0_IMSK, hw->intr_mask);
if (hw->chip_id != CHIP_ID_GENESIS)
skge_write8(hw, GMAC_IRQ_MSK, 0);
spin_lock_bh(&hw->phy_lock);
- for (i = 0; i < ports; i++) {
+ for (i = 0; i < hw->ports; i++) {
if (hw->chip_id == CHIP_ID_GENESIS)
genesis_reset(hw, i);
else
@@ -3071,7 +3026,8 @@
}
/* Initialize network device */
-static struct net_device *skge_devinit(struct skge_hw *hw, int port)
+static struct net_device *skge_devinit(struct skge_hw *hw, int port,
+ int highmem)
{
struct skge_port *skge;
struct net_device *dev = alloc_etherdev(sizeof(*skge));
@@ -3104,6 +3060,8 @@
#endif
dev->irq = hw->pdev->irq;
dev->features = NETIF_F_LLTX;
+ if (highmem)
+ dev->features |= NETIF_F_HIGHDMA;
skge = netdev_priv(dev);
skge->netdev = dev;
@@ -3117,7 +3075,7 @@
skge->flow_control = FLOW_MODE_SYMMETRIC;
skge->duplex = -1;
skge->speed = -1;
- skge->advertising = skge_modes(hw);
+ skge->advertising = skge_supported_modes(hw);
hw->dev[port] = dev;
@@ -3125,10 +3083,6 @@
spin_lock_init(&skge->tx_lock);
- init_timer(&skge->link_check);
- skge->link_check.function = skge_link_timer;
- skge->link_check.data = (unsigned long) skge;
-
init_timer(&skge->led_blink);
skge->led_blink.function = skge_blink_timer;
skge->led_blink.data = (unsigned long) skge;
@@ -3232,14 +3186,11 @@
printk(KERN_INFO PFX "addr 0x%lx irq %d chip %s rev %d\n",
pci_resource_start(pdev, 0), pdev->irq,
- skge_board_name(hw), chip_rev(hw));
+ skge_board_name(hw), hw->chip_rev);
- if ((dev = skge_devinit(hw, 0)) == NULL)
+ if ((dev = skge_devinit(hw, 0, using_dac)) == NULL)
goto err_out_led_off;
- if (using_dac)
- dev->features |= NETIF_F_HIGHDMA;
-
if ((err = register_netdev(dev))) {
printk(KERN_ERR PFX "%s: cannot register net device\n",
pci_name(pdev));
@@ -3248,10 +3199,7 @@
skge_show_addr(dev);
- if (isdualport(hw) && (dev1 = skge_devinit(hw, 1))) {
- if (using_dac)
- dev1->features |= NETIF_F_HIGHDMA;
-
+ if (hw->ports > 1 && (dev1 = skge_devinit(hw, 1, using_dac))) {
if (register_netdev(dev1) == 0)
skge_show_addr(dev1);
else {
@@ -3288,7 +3236,7 @@
struct skge_hw *hw = pci_get_drvdata(pdev);
struct net_device *dev0, *dev1;
- if(!hw)
+ if (!hw)
return;
if ((dev1 = hw->dev[1]))
@@ -3316,7 +3264,7 @@
struct skge_hw *hw = pci_get_drvdata(pdev);
int i, wol = 0;
- for(i = 0; i < 2; i++) {
+ for (i = 0; i < 2; i++) {
struct net_device *dev = hw->dev[i];
if (dev) {
@@ -3349,11 +3297,11 @@
skge_reset(hw);
- for(i = 0; i < 2; i++) {
+ for (i = 0; i < 2; i++) {
struct net_device *dev = hw->dev[i];
if (dev) {
netif_device_attach(dev);
- if(netif_running(dev))
+ if (netif_running(dev))
skge_up(dev);
}
}
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index 36c62b6..14d0cc0 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -7,31 +7,6 @@
/* PCI config registers */
#define PCI_DEV_REG1 0x40
#define PCI_DEV_REG2 0x44
-#ifndef PCI_VPD
-#define PCI_VPD 0x50
-#endif
-
-/* PCI_OUR_REG_2 32 bit Our Register 2 */
-enum {
- PCI_VPD_WR_THR = 0xff<<24, /* Bit 31..24: VPD Write Threshold */
- PCI_DEV_SEL = 0x7f<<17, /* Bit 23..17: EEPROM Device Select */
- PCI_VPD_ROM_SZ = 7 <<14, /* Bit 16..14: VPD ROM Size */
- /* Bit 13..12: reserved */
- PCI_EN_DUMMY_RD = 1<<3, /* Enable Dummy Read */
- PCI_REV_DESC = 1<<2, /* Reverse Desc. Bytes */
- PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */
-};
-
-/* PCI_VPD_ADR_REG 16 bit VPD Address Register */
-enum {
- PCI_VPD_FLAG = 1<<15, /* starts VPD rd/wr cycle */
- PCI_VPD_ADR_MSK =0x7fffL, /* Bit 14.. 0: VPD Address Mask */
- VPD_RES_ID = 0x82,
- VPD_RES_READ = 0x90,
- VPD_RES_WRITE = 0x81,
- VPD_RES_END = 0x78,
-};
-
#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
PCI_STATUS_SIG_SYSTEM_ERROR | \
@@ -39,7 +14,6 @@
PCI_STATUS_REC_TARGET_ABORT | \
PCI_STATUS_PARITY)
-
enum csr_regs {
B0_RAP = 0x0000,
B0_CTST = 0x0004,
@@ -229,8 +203,11 @@
IS_XA2_F = 1<<1, /* Q_XA2 End of Frame */
IS_XA2_C = 1<<0, /* Q_XA2 Encoding Error */
- IS_PORT_1 = IS_XA1_F| IS_R1_F| IS_MAC1,
- IS_PORT_2 = IS_XA2_F| IS_R2_F| IS_MAC2,
+ IS_TO_PORT1 = IS_PA_TO_RX1 | IS_PA_TO_TX1,
+ IS_TO_PORT2 = IS_PA_TO_RX2 | IS_PA_TO_TX2,
+
+ IS_PORT_1 = IS_XA1_F| IS_R1_F | IS_TO_PORT1 | IS_MAC1,
+ IS_PORT_2 = IS_XA2_F| IS_R2_F | IS_TO_PORT2 | IS_MAC2,
};
@@ -288,14 +265,6 @@
CHIP_REV_YU_LITE_A3 = 7, /* Chip Rev. for YUKON-Lite A3 */
};
-/* B2_LD_TEST 8 bit EPROM loader test register */
-enum {
- LD_T_ON = 1<<3, /* Loader Test mode on */
- LD_T_OFF = 1<<2, /* Loader Test mode off */
- LD_T_STEP = 1<<1, /* Decrement FPROM addr. Counter */
- LD_START = 1<<0, /* Start loading FPROM */
-};
-
/* B2_TI_CTRL 8 bit Timer control */
/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */
enum {
@@ -313,16 +282,6 @@
TIM_T_STEP = 1<<0, /* Test step */
};
-/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */
-/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */
-/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */
-enum {
- DPT_MSK = 0x00ffffffL, /* Bit 23.. 0: Desc Poll Timer Bits */
-
- DPT_START = 1<<1, /* Start Descriptor Poll Timer */
- DPT_STOP = 1<<0, /* Stop Descriptor Poll Timer */
-};
-
/* B2_GP_IO 32 bit General Purpose I/O Register */
enum {
GP_DIR_9 = 1<<25, /* IO_9 direct, 0=In/1=Out */
@@ -348,30 +307,6 @@
GP_IO_0 = 1<<0, /* IO_0 pin */
};
-/* Rx/Tx Path related Arbiter Test Registers */
-/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */
-/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */
-/* B3_PA_TEST 16 bit Packet Arbiter Test Register */
-/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */
-enum {
- TX2_T_EV = 1<<15,/* TX2 Timeout/Recv Event occured */
- TX2_T_ON = 1<<14,/* TX2 Timeout/Recv Timer Test On */
- TX2_T_OFF = 1<<13,/* TX2 Timeout/Recv Timer Tst Off */
- TX2_T_STEP = 1<<12,/* TX2 Timeout/Recv Timer Step */
- TX1_T_EV = 1<<11,/* TX1 Timeout/Recv Event occured */
- TX1_T_ON = 1<<10,/* TX1 Timeout/Recv Timer Test On */
- TX1_T_OFF = 1<<9, /* TX1 Timeout/Recv Timer Tst Off */
- TX1_T_STEP = 1<<8, /* TX1 Timeout/Recv Timer Step */
- RX2_T_EV = 1<<7, /* RX2 Timeout/Recv Event occured */
- RX2_T_ON = 1<<6, /* RX2 Timeout/Recv Timer Test On */
- RX2_T_OFF = 1<<5, /* RX2 Timeout/Recv Timer Tst Off */
- RX2_T_STEP = 1<<4, /* RX2 Timeout/Recv Timer Step */
- RX1_T_EV = 1<<3, /* RX1 Timeout/Recv Event occured */
- RX1_T_ON = 1<<2, /* RX1 Timeout/Recv Timer Test On */
- RX1_T_OFF = 1<<1, /* RX1 Timeout/Recv Timer Tst Off */
- RX1_T_STEP = 1<<0, /* RX1 Timeout/Recv Timer Step */
-};
-
/* Descriptor Bit Definition */
/* TxCtrl Transmit Buffer Control Field */
/* RxCtrl Receive Buffer Control Field */
@@ -428,14 +363,6 @@
RI_RST_SET = 1<<0, /* Set RAM Interface Reset */
};
-/* B3_RI_TEST 8 bit RAM Iface Test Register */
-enum {
- RI_T_EV = 1<<3, /* Timeout Event occured */
- RI_T_ON = 1<<2, /* Timeout Timer Test On */
- RI_T_OFF = 1<<1, /* Timeout Timer Test Off */
- RI_T_STEP = 1<<0, /* Timeout Timer Step */
-};
-
/* MAC Arbiter Registers */
/* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */
enum {
@@ -452,19 +379,6 @@
#define SK_PKT_TO_MAX 0xffff /* Maximum value */
#define SK_RI_TO_53 36 /* RAM interface timeout */
-
-/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */
-enum {
- MA_ENA_REC_TX2 = 1<<7, /* Enable Recovery Timer TX2 */
- MA_DIS_REC_TX2 = 1<<6, /* Disable Recovery Timer TX2 */
- MA_ENA_REC_TX1 = 1<<5, /* Enable Recovery Timer TX1 */
- MA_DIS_REC_TX1 = 1<<4, /* Disable Recovery Timer TX1 */
- MA_ENA_REC_RX2 = 1<<3, /* Enable Recovery Timer RX2 */
- MA_DIS_REC_RX2 = 1<<2, /* Disable Recovery Timer RX2 */
- MA_ENA_REC_RX1 = 1<<1, /* Enable Recovery Timer RX1 */
- MA_DIS_REC_RX1 = 1<<0, /* Disable Recovery Timer RX1 */
-};
-
/* Packet Arbiter Registers */
/* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */
enum {
@@ -488,7 +402,7 @@
PA_ENA_TO_TX1 | PA_ENA_TO_TX2)
-/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
+/* Transmit Arbiter Registers MAC 1 and 2, use SK_REG() to access */
/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */
/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */
/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */
@@ -511,7 +425,7 @@
/*
* Bank 4 - 5
*/
-/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
+/* Transmit Arbiter Registers MAC 1 and 2, use SK_REG() to access */
enum {
TXA_ITI_INI = 0x0200,/* 32 bit Tx Arb Interval Timer Init Val*/
TXA_ITI_VAL = 0x0204,/* 32 bit Tx Arb Interval Timer Value */
@@ -537,7 +451,7 @@
/* Queue Register Offsets, use Q_ADDR() to access */
enum {
- B8_Q_REGS = 0x0400, /* base of Queue registers */
+ B8_Q_REGS = 0x0400, /* base of Queue registers */
Q_D = 0x00, /* 8*32 bit Current Descriptor */
Q_DA_L = 0x20, /* 32 bit Current Descriptor Address Low dWord */
Q_DA_H = 0x24, /* 32 bit Current Descriptor Address High dWord */
@@ -618,8 +532,7 @@
enum {
PHY_ADDR_XMAC = 0<<8,
PHY_ADDR_BCOM = 1<<8,
- PHY_ADDR_LONE = 3<<8,
- PHY_ADDR_NAT = 0<<8,
+
/* GPHY address (bits 15..11 of SMI control reg) */
PHY_ADDR_MARV = 0,
};
@@ -986,7 +899,7 @@
LINKLED_BLINK_OFF = 0x10,
LINKLED_BLINK_ON = 0x20,
};
-
+
/* GMAC and GPHY Control Registers (YUKON only) */
enum {
GMAC_CTRL = 0x0f00,/* 32 bit GMAC Control Reg */
@@ -1151,54 +1064,6 @@
PHY_MARV_FE_SPEC_2 = 0x1c,/* 16 bit r/w Specific Control Reg. 2 */
};
-/* Level One-PHY Registers, indirect addressed over XMAC */
-enum {
- PHY_LONE_CTRL = 0x00,/* 16 bit r/w PHY Control Register */
- PHY_LONE_STAT = 0x01,/* 16 bit r/o PHY Status Register */
- PHY_LONE_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */
- PHY_LONE_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */
- PHY_LONE_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */
- PHY_LONE_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */
- PHY_LONE_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */
- PHY_LONE_NEPG = 0x07,/* 16 bit r/w Next Page Register */
- PHY_LONE_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */
- /* Level One-specific registers */
- PHY_LONE_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */
- PHY_LONE_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */
- PHY_LONE_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */
- PHY_LONE_PORT_CFG = 0x10,/* 16 bit r/w Port Configuration Reg*/
- PHY_LONE_Q_STAT = 0x11,/* 16 bit r/o Quick Status Reg */
- PHY_LONE_INT_ENAB = 0x12,/* 16 bit r/w Interrupt Enable Reg */
- PHY_LONE_INT_STAT = 0x13,/* 16 bit r/o Interrupt Status Reg */
- PHY_LONE_LED_CFG = 0x14,/* 16 bit r/w LED Configuration Reg */
- PHY_LONE_PORT_CTRL = 0x15,/* 16 bit r/w Port Control Reg */
- PHY_LONE_CIM = 0x16,/* 16 bit r/o CIM Reg */
-};
-
-/* National-PHY Registers, indirect addressed over XMAC */
-enum {
- PHY_NAT_CTRL = 0x00,/* 16 bit r/w PHY Control Register */
- PHY_NAT_STAT = 0x01,/* 16 bit r/w PHY Status Register */
- PHY_NAT_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */
- PHY_NAT_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */
- PHY_NAT_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */
- PHY_NAT_AUNE_LP = 0x05,/* 16 bit r/o Link Partner Ability Reg */
- PHY_NAT_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */
- PHY_NAT_NEPG = 0x07,/* 16 bit r/w Next Page Register */
- PHY_NAT_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner Reg */
- /* National-specific registers */
- PHY_NAT_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */
- PHY_NAT_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */
- PHY_NAT_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Register */
- PHY_NAT_EXT_CTRL1 = 0x10,/* 16 bit r/o Extended Control Reg1 */
- PHY_NAT_Q_STAT1 = 0x11,/* 16 bit r/o Quick Status Reg1 */
- PHY_NAT_10B_OP = 0x12,/* 16 bit r/o 10Base-T Operations Reg */
- PHY_NAT_EXT_CTRL2 = 0x13,/* 16 bit r/o Extended Control Reg1 */
- PHY_NAT_Q_STAT2 = 0x14,/* 16 bit r/o Quick Status Reg2 */
-
- PHY_NAT_PHY_ADDR = 0x19,/* 16 bit r/o PHY Address Register */
-};
-
enum {
PHY_CT_RESET = 1<<15, /* Bit 15: (sc) clear all PHY related regs */
PHY_CT_LOOP = 1<<14, /* Bit 14: enable Loopback over PHY */
@@ -1253,8 +1118,29 @@
PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
};
+/* Advertisement register bits */
enum {
PHY_AN_NXT_PG = 1<<15, /* Bit 15: Request Next Page */
+ PHY_AN_ACK = 1<<14, /* Bit 14: (ro) Acknowledge Received */
+ PHY_AN_RF = 1<<13, /* Bit 13: Remote Fault Bits */
+
+ PHY_AN_PAUSE_ASYM = 1<<11,/* Bit 11: Try for asymmetric */
+ PHY_AN_PAUSE_CAP = 1<<10, /* Bit 10: Try for pause */
+ PHY_AN_100BASE4 = 1<<9, /* Bit 9: Try for 100mbps 4k packets */
+ PHY_AN_100FULL = 1<<8, /* Bit 8: Try for 100mbps full-duplex */
+ PHY_AN_100HALF = 1<<7, /* Bit 7: Try for 100mbps half-duplex */
+ PHY_AN_10FULL = 1<<6, /* Bit 6: Try for 10mbps full-duplex */
+ PHY_AN_10HALF = 1<<5, /* Bit 5: Try for 10mbps half-duplex */
+ PHY_AN_CSMA = 1<<0, /* Bit 0: Only selector supported */
+ PHY_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/
+ PHY_AN_FULL = PHY_AN_100FULL | PHY_AN_10FULL | PHY_AN_CSMA,
+ PHY_AN_ALL = PHY_AN_10HALF | PHY_AN_10FULL |
+ PHY_AN_100HALF | PHY_AN_100FULL,
+};
+
+/* Xmac Specific */
+enum {
+ PHY_X_AN_NXT_PG = 1<<15, /* Bit 15: Request Next Page */
PHY_X_AN_ACK = 1<<14, /* Bit 14: (ro) Acknowledge Received */
PHY_X_AN_RFB = 3<<12,/* Bit 13..12: Remote Fault Bits */
@@ -1263,82 +1149,6 @@
PHY_X_AN_FD = 1<<5, /* Bit 5: Full Duplex */
};
-enum {
- PHY_B_AN_RF = 1<<13, /* Bit 13: Remote Fault */
-
- PHY_B_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */
- PHY_B_AN_PC = 1<<10, /* Bit 10: Pause Capable */
- PHY_B_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/
-};
-
-enum {
- PHY_L_AN_RF = 1<<13, /* Bit 13: Remote Fault */
- /* Bit 12: reserved */
- PHY_L_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */
- PHY_L_AN_PC = 1<<10, /* Bit 10: Pause Capable */
-
- PHY_L_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/
-};
-
-/* PHY_NAT_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement */
-/* PHY_NAT_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/
-/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */
-enum {
- PHY_N_AN_RF = 1<<13, /* Bit 13: Remote Fault */
-
- PHY_N_AN_100F = 1<<11, /* Bit 11: 100Base-T2 FD Support */
- PHY_N_AN_100H = 1<<10, /* Bit 10: 100Base-T2 HD Support */
-
- PHY_N_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/
-};
-
-/* field type definition for PHY_x_AN_SEL */
-enum {
- PHY_SEL_TYPE = 1, /* 00001 = Ethernet */
-};
-
-enum {
- PHY_ANE_LP_NP = 1<<3, /* Bit 3: Link Partner can Next Page */
- PHY_ANE_LOC_NP = 1<<2, /* Bit 2: Local PHY can Next Page */
- PHY_ANE_RX_PG = 1<<1, /* Bit 1: Page Received */
-};
-
-enum {
- PHY_ANE_PAR_DF = 1<<4, /* Bit 4: Parallel Detection Fault */
-
- PHY_ANE_LP_CAP = 1<<0, /* Bit 0: Link Partner Auto-Neg. Cap. */
-};
-
-enum {
- PHY_NP_MORE = 1<<15, /* Bit 15: More, Next Pages to follow */
- PHY_NP_ACK1 = 1<<14, /* Bit 14: (ro) Ack1, for receiving a message */
- PHY_NP_MSG_VAL = 1<<13, /* Bit 13: Message Page valid */
- PHY_NP_ACK2 = 1<<12, /* Bit 12: Ack2, comply with msg content */
- PHY_NP_TOG = 1<<11, /* Bit 11: Toggle Bit, ensure sync */
- PHY_NP_MSG = 0x07ff, /* Bit 10..0: Message from/to Link Partner */
-};
-
-enum {
- PHY_X_EX_FD = 1<<15, /* Bit 15: Device Supports Full Duplex */
- PHY_X_EX_HD = 1<<14, /* Bit 14: Device Supports Half Duplex */
-};
-
-enum {
- PHY_X_RS_PAUSE = 3<<7,/* Bit 8..7: selected Pause Mode */
- PHY_X_RS_HD = 1<<6, /* Bit 6: Half Duplex Mode selected */
- PHY_X_RS_FD = 1<<5, /* Bit 5: Full Duplex Mode selected */
- PHY_X_RS_ABLMIS = 1<<4, /* Bit 4: duplex or pause cap mismatch */
- PHY_X_RS_PAUMIS = 1<<3, /* Bit 3: pause capability mismatch */
-};
-
-/** Remote Fault Bits (PHY_X_AN_RFB) encoding */
-enum {
- X_RFB_OK = 0<<12,/* Bit 13..12 No errors, Link OK */
- X_RFB_LF = 1<<12, /* Bit 13..12 Link Failure */
- X_RFB_OFF = 2<<12,/* Bit 13..12 Offline */
- X_RFB_AN_ERR = 3<<12,/* Bit 13..12 Auto-Negotiation Error */
-};
-
/* Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding */
enum {
PHY_X_P_NO_PAUSE = 0<<7,/* Bit 8..7: no Pause Mode */
@@ -1418,6 +1228,16 @@
PHY_B_PES_MLT3_ER = 1<<0, /* Bit 0: MLT3 code Error */
};
+/* PHY_BCOM_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
+/* PHY_BCOM_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/
+enum {
+ PHY_B_AN_RF = 1<<13, /* Bit 13: Remote Fault */
+
+ PHY_B_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */
+ PHY_B_AN_PC = 1<<10, /* Bit 10: Pause Capable */
+};
+
+
/***** PHY_BCOM_FC_CTR 16 bit r/w False Carrier Counter *****/
enum {
PHY_B_FC_CTR = 0xff, /* Bit 7..0: False Carrier Counter */
@@ -1478,7 +1298,9 @@
PHY_B_IS_LST_CHANGE = 1<<1, /* Bit 1: Link Status Changed */
PHY_B_IS_CRC_ER = 1<<0, /* Bit 0: CRC Error */
};
-#define PHY_B_DEF_MSK (~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE))
+#define PHY_B_DEF_MSK \
+ (~(PHY_B_IS_PSE | PHY_B_IS_AN_PR | PHY_B_IS_DUP_CHANGE | \
+ PHY_B_IS_LSP_CHANGE | PHY_B_IS_LST_CHANGE))
/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */
enum {
@@ -1495,166 +1317,6 @@
PHY_B_RES_1000HD = 6<<8,/* Bit 10..8: 1000Base-T Half Dup. */
};
-/*
- * Level One-Specific
- */
-/***** PHY_LONE_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
-enum {
- PHY_L_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */
- PHY_L_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */
- PHY_L_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */
- PHY_L_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */
- PHY_L_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */
- PHY_L_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */
-};
-
-/***** PHY_LONE_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
-enum {
- PHY_L_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */
- PHY_L_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */
- PHY_L_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */
- PHY_L_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status */
- PHY_L_1000S_LP_FD = 1<<11, /* Bit 11: Link Partner can FD */
- PHY_L_1000S_LP_HD = 1<<10, /* Bit 10: Link Partner can HD */
-
- PHY_L_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */
-
-/***** PHY_LONE_EXT_STAT 16 bit r/o Extended Status Register *****/
- PHY_L_ES_X_FD_CAP = 1<<15, /* Bit 15: 1000Base-X FD capable */
- PHY_L_ES_X_HD_CAP = 1<<14, /* Bit 14: 1000Base-X HD capable */
- PHY_L_ES_T_FD_CAP = 1<<13, /* Bit 13: 1000Base-T FD capable */
- PHY_L_ES_T_HD_CAP = 1<<12, /* Bit 12: 1000Base-T HD capable */
-};
-
-/***** PHY_LONE_PORT_CFG 16 bit r/w Port Configuration Reg *****/
-enum {
- PHY_L_PC_REP_MODE = 1<<15, /* Bit 15: Repeater Mode */
-
- PHY_L_PC_TX_DIS = 1<<13, /* Bit 13: Tx output Disabled */
- PHY_L_PC_BY_SCR = 1<<12, /* Bit 12: Bypass Scrambler */
- PHY_L_PC_BY_45 = 1<<11, /* Bit 11: Bypass 4B5B-Decoder */
- PHY_L_PC_JAB_DIS = 1<<10, /* Bit 10: Jabber Disabled */
- PHY_L_PC_SQE = 1<<9, /* Bit 9: Enable Heartbeat */
- PHY_L_PC_TP_LOOP = 1<<8, /* Bit 8: TP Loopback */
- PHY_L_PC_SSS = 1<<7, /* Bit 7: Smart Speed Selection */
- PHY_L_PC_FIFO_SIZE = 1<<6, /* Bit 6: FIFO Size */
- PHY_L_PC_PRE_EN = 1<<5, /* Bit 5: Preamble Enable */
- PHY_L_PC_CIM = 1<<4, /* Bit 4: Carrier Integrity Mon */
- PHY_L_PC_10_SER = 1<<3, /* Bit 3: Use Serial Output */
- PHY_L_PC_ANISOL = 1<<2, /* Bit 2: Unisolate Port */
- PHY_L_PC_TEN_BIT = 1<<1, /* Bit 1: 10bit iface mode on */
- PHY_L_PC_ALTCLOCK = 1<<0, /* Bit 0: (ro) ALTCLOCK Mode on */
-};
-
-/***** PHY_LONE_Q_STAT 16 bit r/o Quick Status Reg *****/
-enum {
- PHY_L_QS_D_RATE = 3<<14,/* Bit 15..14: Data Rate */
- PHY_L_QS_TX_STAT = 1<<13, /* Bit 13: Transmitting */
- PHY_L_QS_RX_STAT = 1<<12, /* Bit 12: Receiving */
- PHY_L_QS_COL_STAT = 1<<11, /* Bit 11: Collision */
- PHY_L_QS_L_STAT = 1<<10, /* Bit 10: Link is up */
- PHY_L_QS_DUP_MOD = 1<<9, /* Bit 9: Full/Half Duplex */
- PHY_L_QS_AN = 1<<8, /* Bit 8: AutoNeg is On */
- PHY_L_QS_AN_C = 1<<7, /* Bit 7: AN is Complete */
- PHY_L_QS_LLE = 7<<4,/* Bit 6..4: Line Length Estim. */
- PHY_L_QS_PAUSE = 1<<3, /* Bit 3: LP advertised Pause */
- PHY_L_QS_AS_PAUSE = 1<<2, /* Bit 2: LP adv. asym. Pause */
- PHY_L_QS_ISOLATE = 1<<1, /* Bit 1: CIM Isolated */
- PHY_L_QS_EVENT = 1<<0, /* Bit 0: Event has occurred */
-};
-
-/***** PHY_LONE_INT_ENAB 16 bit r/w Interrupt Enable Reg *****/
-/***** PHY_LONE_INT_STAT 16 bit r/o Interrupt Status Reg *****/
-enum {
- PHY_L_IS_AN_F = 1<<13, /* Bit 13: Auto-Negotiation fault */
- PHY_L_IS_CROSS = 1<<11, /* Bit 11: Crossover used */
- PHY_L_IS_POL = 1<<10, /* Bit 10: Polarity correct. used */
- PHY_L_IS_SS = 1<<9, /* Bit 9: Smart Speed Downgrade */
- PHY_L_IS_CFULL = 1<<8, /* Bit 8: Counter Full */
- PHY_L_IS_AN_C = 1<<7, /* Bit 7: AutoNeg Complete */
- PHY_L_IS_SPEED = 1<<6, /* Bit 6: Speed Changed */
- PHY_L_IS_DUP = 1<<5, /* Bit 5: Duplex Changed */
- PHY_L_IS_LS = 1<<4, /* Bit 4: Link Status Changed */
- PHY_L_IS_ISOL = 1<<3, /* Bit 3: Isolate Occured */
- PHY_L_IS_MDINT = 1<<2, /* Bit 2: (ro) STAT: MII Int Pending */
- PHY_L_IS_INTEN = 1<<1, /* Bit 1: ENAB: Enable IRQs */
- PHY_L_IS_FORCE = 1<<0, /* Bit 0: ENAB: Force Interrupt */
-};
-
-/* int. mask */
-#define PHY_L_DEF_MSK (PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN)
-
-/***** PHY_LONE_LED_CFG 16 bit r/w LED Configuration Reg *****/
-enum {
- PHY_L_LC_LEDC = 3<<14,/* Bit 15..14: Col/Blink/On/Off */
- PHY_L_LC_LEDR = 3<<12,/* Bit 13..12: Rx/Blink/On/Off */
- PHY_L_LC_LEDT = 3<<10,/* Bit 11..10: Tx/Blink/On/Off */
- PHY_L_LC_LEDG = 3<<8,/* Bit 9..8: Giga/Blink/On/Off */
- PHY_L_LC_LEDS = 3<<6,/* Bit 7..6: 10-100/Blink/On/Off */
- PHY_L_LC_LEDL = 3<<4,/* Bit 5..4: Link/Blink/On/Off */
- PHY_L_LC_LEDF = 3<<2,/* Bit 3..2: Duplex/Blink/On/Off */
- PHY_L_LC_PSTRECH= 1<<1, /* Bit 1: Strech LED Pulses */
- PHY_L_LC_FREQ = 1<<0, /* Bit 0: 30/100 ms */
-};
-
-/***** PHY_LONE_PORT_CTRL 16 bit r/w Port Control Reg *****/
-enum {
- PHY_L_PC_TX_TCLK = 1<<15, /* Bit 15: Enable TX_TCLK */
- PHY_L_PC_ALT_NP = 1<<13, /* Bit 14: Alternate Next Page */
- PHY_L_PC_GMII_ALT= 1<<12, /* Bit 13: Alternate GMII driver */
- PHY_L_PC_TEN_CRS = 1<<10, /* Bit 10: Extend CRS*/
-};
-
-/***** PHY_LONE_CIM 16 bit r/o CIM Reg *****/
-enum {
- PHY_L_CIM_ISOL = 0xff<<8,/* Bit 15..8: Isolate Count */
- PHY_L_CIM_FALSE_CAR = 0xff, /* Bit 7..0: False Carrier Count */
-};
-
-/*
- * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding
- */
-enum {
- PHY_L_P_NO_PAUSE= 0<<10,/* Bit 11..10: no Pause Mode */
- PHY_L_P_SYM_MD = 1<<10, /* Bit 11..10: symmetric Pause Mode */
- PHY_L_P_ASYM_MD = 2<<10,/* Bit 11..10: asymmetric Pause Mode */
- PHY_L_P_BOTH_MD = 3<<10,/* Bit 11..10: both Pause Mode */
-};
-
-/*
- * National-Specific
- */
-/***** PHY_NAT_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
-enum {
- PHY_N_1000C_TEST= 7<<13,/* Bit 15..13: Test Modes */
- PHY_N_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */
- PHY_N_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */
- PHY_N_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */
- PHY_N_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */
- PHY_N_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */
- PHY_N_1000C_APC = 1<<7, /* Bit 7: Asymmetric Pause Cap. */};
-
-
-/***** PHY_NAT_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
-enum {
- PHY_N_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */
- PHY_N_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */
- PHY_N_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */
- PHY_N_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status*/
- PHY_N_1000S_LP_FD= 1<<11, /* Bit 11: Link Partner can FD */
- PHY_N_1000S_LP_HD= 1<<10, /* Bit 10: Link Partner can HD */
- PHY_N_1000C_LP_APC= 1<<9, /* Bit 9: LP Asym. Pause Cap. */
- PHY_N_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */
-};
-
-/***** PHY_NAT_EXT_STAT 16 bit r/o Extended Status Register *****/
-enum {
- PHY_N_ES_X_FD_CAP= 1<<15, /* Bit 15: 1000Base-X FD capable */
- PHY_N_ES_X_HD_CAP= 1<<14, /* Bit 14: 1000Base-X HD capable */
- PHY_N_ES_T_FD_CAP= 1<<13, /* Bit 13: 1000Base-T FD capable */
- PHY_N_ES_T_HD_CAP= 1<<12, /* Bit 12: 1000Base-T HD capable */
-};
-
/** Marvell-Specific */
enum {
PHY_M_AN_NXT_PG = 1<<15, /* Request Next Page */
@@ -1718,7 +1380,7 @@
PHY_M_PC_EN_DET_PLUS = 3<<8, /* Energy Detect Plus (Mode 2) */
};
-#define PHY_M_PC_MDI_XMODE(x) (((x)<<5) & PHY_M_PC_MDIX_MSK)
+#define PHY_M_PC_MDI_XMODE(x) (((x)<<5) & PHY_M_PC_MDIX_MSK)
enum {
PHY_M_PC_MAN_MDI = 0, /* 00 = Manual MDI configuration */
@@ -2105,7 +1767,7 @@
GM_GPSR_FC_RX_DIS = 1<<2, /* Bit 2: Rx Flow-Control Mode Disabled */
GM_GPSR_PROM_EN = 1<<1, /* Bit 1: Promiscuous Mode Enabled */
};
-
+
/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */
enum {
GM_GPCR_PROM_ENA = 1<<14, /* Bit 14: Enable Promiscuous Mode */
@@ -2127,7 +1789,7 @@
#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS|GM_GPCR_AU_SPD_DIS)
-
+
/* GM_TX_CTRL 16 bit r/w Transmit Control Register */
enum {
GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */
@@ -2138,7 +1800,7 @@
#define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK)
#define TX_COL_DEF 0x04
-
+
/* GM_RX_CTRL 16 bit r/w Receive Control Register */
enum {
GM_RXCR_UCF_ENA = 1<<15, /* Bit 15: Enable Unicast filtering */
@@ -2146,7 +1808,7 @@
GM_RXCR_CRC_DIS = 1<<13, /* Bit 13: Remove 4-byte CRC */
GM_RXCR_PASS_FC = 1<<12, /* Bit 12: Pass FC packets to FIFO */
};
-
+
/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */
enum {
GM_TXPA_JAMLEN_MSK = 0x03<<14, /* Bit 15..14: Jam Length */
@@ -2171,7 +1833,7 @@
GM_SMOD_JUMBO_ENA = 1<<8, /* Bit 8: Enable Jumbo (Max. Frame Len) */
GM_SMOD_IPG_MSK = 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */
};
-
+
#define DATA_BLIND_VAL(x) (((x)<<11) & GM_SMOD_DATABL_MSK)
#define DATA_BLIND_DEF 0x04
@@ -2186,7 +1848,7 @@
GM_SMI_CT_RD_VAL = 1<<4, /* Bit 4: Read Valid (Read completed) */
GM_SMI_CT_BUSY = 1<<3, /* Bit 3: Busy (Operation in progress) */
};
-
+
#define GM_SMI_CT_PHY_AD(x) (((x)<<11) & GM_SMI_CT_PHY_A_MSK)
#define GM_SMI_CT_REG_AD(x) (((x)<<6) & GM_SMI_CT_REG_A_MSK)
@@ -2195,7 +1857,7 @@
GM_PAR_MIB_CLR = 1<<5, /* Bit 5: Set MIB Clear Counter Mode */
GM_PAR_MIB_TST = 1<<4, /* Bit 4: MIB Load Counter (Test Mode) */
};
-
+
/* Receive Frame Status Encoding */
enum {
GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */
@@ -2217,12 +1879,12 @@
/*
* GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR)
*/
- GMR_FS_ANY_ERR = GMR_FS_CRC_ERR | GMR_FS_LONG_ERR |
- GMR_FS_MII_ERR | GMR_FS_BAD_FC | GMR_FS_GOOD_FC |
+ GMR_FS_ANY_ERR = GMR_FS_CRC_ERR | GMR_FS_LONG_ERR |
+ GMR_FS_MII_ERR | GMR_FS_BAD_FC | GMR_FS_GOOD_FC |
GMR_FS_JABBER,
/* Rx GMAC FIFO Flush Mask (default) */
RX_FF_FL_DEF_MSK = GMR_FS_CRC_ERR | GMR_FS_RX_FF_OV |GMR_FS_MII_ERR |
- GMR_FS_BAD_FC | GMR_FS_GOOD_FC | GMR_FS_UN_SIZE |
+ GMR_FS_BAD_FC | GMR_FS_GOOD_FC | GMR_FS_UN_SIZE |
GMR_FS_JABBER,
};
@@ -2540,10 +2202,6 @@
};
-/* XM_PHY_ADDR 16 bit r/w PHY Address Register */
-#define XM_PHY_ADDR_SZ 0x1f /* Bit 4..0: PHY Address bits */
-
-
/* XM_GP_PORT 32 bit r/w General Purpose Port Register */
enum {
XM_GP_ANIP = 1<<6, /* Bit 6: (ro) Auto-Neg. in progress */
@@ -2662,8 +2320,8 @@
};
#define XM_PAUSE_MODE (XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I)
-#define XM_DEF_MODE (XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\
- XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA)
+#define XM_DEF_MODE (XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\
+ XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA)
/* XM_STAT_CMD 16 bit r/w Statistics Command Register */
enum {
@@ -2793,28 +2451,20 @@
u32 intr_mask;
struct net_device *dev[2];
- u8 mac_cfg;
u8 chip_id;
+ u8 chip_rev;
u8 phy_type;
u8 pmd_type;
u16 phy_addr;
+ u8 ports;
u32 ram_size;
u32 ram_offset;
-
+
struct tasklet_struct ext_tasklet;
spinlock_t phy_lock;
};
-static inline int isdualport(const struct skge_hw *hw)
-{
- return !(hw->mac_cfg & CFG_SNG_MAC);
-}
-
-static inline u8 chip_rev(const struct skge_hw *hw)
-{
- return (hw->mac_cfg & CFG_CHIP_R_MSK) >> 4;
-}
static inline int iscopper(const struct skge_hw *hw)
{
@@ -2827,7 +2477,7 @@
FLOW_MODE_REM_SEND = 2, /* Symmetric or just remote */
FLOW_MODE_SYMMETRIC = 3, /* Both stations may send PAUSE */
};
-
+
struct skge_port {
u32 msg_enable;
struct skge_hw *hw;
@@ -2853,8 +2503,8 @@
void *mem; /* PCI memory for rings */
dma_addr_t dma;
unsigned long mem_size;
+ unsigned int rx_buf_size;
- struct timer_list link_check;
struct timer_list led_blink;
};
@@ -2863,7 +2513,6 @@
static inline u32 skge_read32(const struct skge_hw *hw, int reg)
{
return readl(hw->regs + reg);
-
}
static inline u16 skge_read16(const struct skge_hw *hw, int reg)
@@ -2892,114 +2541,87 @@
}
/* MAC Related Registers inside the device. */
-#define SKGEMAC_REG(port,reg) (((port)<<7)+(reg))
-
-/* PCI config space can be accessed via memory mapped space */
-#define SKGEPCI_REG(reg) ((reg)+ 0x380)
-
-#define SKGEXM_REG(port, reg) \
+#define SK_REG(port,reg) (((port)<<7)+(reg))
+#define SK_XMAC_REG(port, reg) \
((BASE_XMAC_1 + (port) * (BASE_XMAC_2 - BASE_XMAC_1)) | (reg) << 1)
-static inline u32 skge_xm_read32(const struct skge_hw *hw, int port, int reg)
+static inline u32 xm_read32(const struct skge_hw *hw, int port, int reg)
{
- return skge_read32(hw, SKGEXM_REG(port,reg));
+ u32 v;
+ v = skge_read16(hw, SK_XMAC_REG(port, reg));
+ v |= (u32)skge_read16(hw, SK_XMAC_REG(port, reg+2)) << 16;
+ return v;
}
-static inline u16 skge_xm_read16(const struct skge_hw *hw, int port, int reg)
+static inline u16 xm_read16(const struct skge_hw *hw, int port, int reg)
{
- return skge_read16(hw, SKGEXM_REG(port,reg));
+ return skge_read16(hw, SK_XMAC_REG(port,reg));
}
-static inline u8 skge_xm_read8(const struct skge_hw *hw, int port, int reg)
+static inline void xm_write32(const struct skge_hw *hw, int port, int r, u32 v)
{
- return skge_read8(hw, SKGEXM_REG(port,reg));
+ skge_write16(hw, SK_XMAC_REG(port,r), v & 0xffff);
+ skge_write16(hw, SK_XMAC_REG(port,r+2), v >> 16);
}
-static inline void skge_xm_write32(const struct skge_hw *hw, int port, int r, u32 v)
+static inline void xm_write16(const struct skge_hw *hw, int port, int r, u16 v)
{
- skge_write32(hw, SKGEXM_REG(port,r), v);
+ skge_write16(hw, SK_XMAC_REG(port,r), v);
}
-static inline void skge_xm_write16(const struct skge_hw *hw, int port, int r, u16 v)
-{
- skge_write16(hw, SKGEXM_REG(port,r), v);
-}
-
-static inline void skge_xm_write8(const struct skge_hw *hw, int port, int r, u8 v)
-{
- skge_write8(hw, SKGEXM_REG(port,r), v);
-}
-
-static inline void skge_xm_outhash(const struct skge_hw *hw, int port, int reg,
+static inline void xm_outhash(const struct skge_hw *hw, int port, int reg,
const u8 *hash)
{
- skge_xm_write16(hw, port, reg,
- (u16)hash[0] | ((u16)hash[1] << 8));
- skge_xm_write16(hw, port, reg+2,
- (u16)hash[2] | ((u16)hash[3] << 8));
- skge_xm_write16(hw, port, reg+4,
- (u16)hash[4] | ((u16)hash[5] << 8));
- skge_xm_write16(hw, port, reg+6,
- (u16)hash[6] | ((u16)hash[7] << 8));
+ xm_write16(hw, port, reg, (u16)hash[0] | ((u16)hash[1] << 8));
+ xm_write16(hw, port, reg+2, (u16)hash[2] | ((u16)hash[3] << 8));
+ xm_write16(hw, port, reg+4, (u16)hash[4] | ((u16)hash[5] << 8));
+ xm_write16(hw, port, reg+6, (u16)hash[6] | ((u16)hash[7] << 8));
}
-static inline void skge_xm_outaddr(const struct skge_hw *hw, int port, int reg,
+static inline void xm_outaddr(const struct skge_hw *hw, int port, int reg,
const u8 *addr)
{
- skge_xm_write16(hw, port, reg,
- (u16)addr[0] | ((u16)addr[1] << 8));
- skge_xm_write16(hw, port, reg,
- (u16)addr[2] | ((u16)addr[3] << 8));
- skge_xm_write16(hw, port, reg,
- (u16)addr[4] | ((u16)addr[5] << 8));
+ xm_write16(hw, port, reg, (u16)addr[0] | ((u16)addr[1] << 8));
+ xm_write16(hw, port, reg+2, (u16)addr[2] | ((u16)addr[3] << 8));
+ xm_write16(hw, port, reg+4, (u16)addr[4] | ((u16)addr[5] << 8));
}
+#define SK_GMAC_REG(port,reg) \
+ (BASE_GMAC_1 + (port) * (BASE_GMAC_2-BASE_GMAC_1) + (reg))
-#define SKGEGMA_REG(port,reg) \
- ((reg) + BASE_GMAC_1 + \
- (port) * (BASE_GMAC_2-BASE_GMAC_1))
-
-static inline u16 skge_gma_read16(const struct skge_hw *hw, int port, int reg)
+static inline u16 gma_read16(const struct skge_hw *hw, int port, int reg)
{
- return skge_read16(hw, SKGEGMA_REG(port,reg));
+ return skge_read16(hw, SK_GMAC_REG(port,reg));
}
-static inline u32 skge_gma_read32(const struct skge_hw *hw, int port, int reg)
+static inline u32 gma_read32(const struct skge_hw *hw, int port, int reg)
{
- return (u32) skge_read16(hw, SKGEGMA_REG(port,reg))
- | ((u32)skge_read16(hw, SKGEGMA_REG(port,reg+4)) << 16);
+ return (u32) skge_read16(hw, SK_GMAC_REG(port,reg))
+ | ((u32)skge_read16(hw, SK_GMAC_REG(port,reg+4)) << 16);
}
-static inline u8 skge_gma_read8(const struct skge_hw *hw, int port, int reg)
+static inline void gma_write16(const struct skge_hw *hw, int port, int r, u16 v)
{
- return skge_read8(hw, SKGEGMA_REG(port,reg));
+ skge_write16(hw, SK_GMAC_REG(port,r), v);
}
-static inline void skge_gma_write16(const struct skge_hw *hw, int port, int r, u16 v)
+static inline void gma_write32(const struct skge_hw *hw, int port, int r, u32 v)
{
- skge_write16(hw, SKGEGMA_REG(port,r), v);
+ skge_write16(hw, SK_GMAC_REG(port, r), (u16) v);
+ skge_write32(hw, SK_GMAC_REG(port, r+4), (u16)(v >> 16));
}
-static inline void skge_gma_write32(const struct skge_hw *hw, int port, int r, u32 v)
+static inline void gma_write8(const struct skge_hw *hw, int port, int r, u8 v)
{
- skge_write16(hw, SKGEGMA_REG(port, r), (u16) v);
- skge_write32(hw, SKGEGMA_REG(port, r+4), (u16)(v >> 16));
+ skge_write8(hw, SK_GMAC_REG(port,r), v);
}
-static inline void skge_gma_write8(const struct skge_hw *hw, int port, int r, u8 v)
-{
- skge_write8(hw, SKGEGMA_REG(port,r), v);
-}
-
-static inline void skge_gm_set_addr(struct skge_hw *hw, int port, int reg,
+static inline void gma_set_addr(struct skge_hw *hw, int port, int reg,
const u8 *addr)
{
- skge_gma_write16(hw, port, reg,
- (u16) addr[0] | ((u16) addr[1] << 8));
- skge_gma_write16(hw, port, reg+4,
- (u16) addr[2] | ((u16) addr[3] << 8));
- skge_gma_write16(hw, port, reg+8,
- (u16) addr[4] | ((u16) addr[5] << 8));
+ gma_write16(hw, port, reg, (u16) addr[0] | ((u16) addr[1] << 8));
+ gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8));
+ gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8));
}
-
+
#endif