ncr5380: Disable the DMA errata workaround flag by default
The only chip that needs the workarounds enabled is an early NMOS
device. That means that the common case is to disable them.
Unfortunately the sense of the flag is such that it has to be set
for the common case.
Rename the flag so that zero can be used to mean "no errata workarounds
needed". This simplifies the code.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 826b63d1..69c73c3 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -457,7 +457,7 @@
instance->base, instance->irq,
instance->can_queue, instance->cmd_per_lun,
instance->sg_tablesize, instance->this_id,
- hostdata->flags & FLAG_NO_DMA_FIXUP ? "NO_DMA_FIXUP " : "",
+ hostdata->flags & FLAG_DMA_FIXUP ? "DMA_FIXUP " : "",
hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "",
#ifdef AUTOPROBE_IRQ
@@ -1480,11 +1480,11 @@
* before the setting of DMA mode to after transfer of the last byte.
*/
- if (hostdata->flags & FLAG_NO_DMA_FIXUP)
+ if (hostdata->flags & FLAG_DMA_FIXUP)
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY);
+ else
NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
MR_ENABLE_EOP_INTR);
- else
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY);
dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG));
@@ -1540,8 +1540,8 @@
if (p & SR_IO) {
foo = NCR5380_pread(instance, d,
- hostdata->flags & FLAG_NO_DMA_FIXUP ? c : c - 1);
- if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
+ hostdata->flags & FLAG_DMA_FIXUP ? c - 1 : c);
+ if (!foo && (hostdata->flags & FLAG_DMA_FIXUP)) {
/*
* The workaround was to transfer fewer bytes than we
* intended to with the pseudo-DMA read function, wait for
@@ -1571,7 +1571,7 @@
}
} else {
foo = NCR5380_pwrite(instance, d, c);
- if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
+ if (!foo && (hostdata->flags & FLAG_DMA_FIXUP)) {
/*
* Wait for the last byte to be sent. If REQ is being asserted for
* the byte we're interested, we'll ACK it and it will go false.
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index 0b03ba2..7b488a0 100644
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -220,7 +220,7 @@
#define NO_IRQ 0
#endif
-#define FLAG_NO_DMA_FIXUP 1 /* No DMA errata workarounds */
+#define FLAG_DMA_FIXUP 1 /* Use DMA errata workarounds */
#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */
#define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */
#define FLAG_TAGGED_QUEUING 64 /* as X3T9.2 spelled it */
diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c
index 221f18c..76b2d33 100644
--- a/drivers/scsi/arm/cumana_1.c
+++ b/drivers/scsi/arm/cumana_1.c
@@ -239,7 +239,7 @@
host->irq = ec->irq;
- ret = NCR5380_init(host, 0);
+ ret = NCR5380_init(host, FLAG_DMA_FIXUP);
if (ret)
goto out_unmap;
diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c
index 1fab1d18..8d84265 100644
--- a/drivers/scsi/arm/oak.c
+++ b/drivers/scsi/arm/oak.c
@@ -143,7 +143,7 @@
host->irq = NO_IRQ;
host->n_io_port = 255;
- ret = NCR5380_init(host, 0);
+ ret = NCR5380_init(host, FLAG_DMA_FIXUP);
if (ret)
goto out_unmap;
diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c
index 6c736b0..30919f4 100644
--- a/drivers/scsi/dtc.c
+++ b/drivers/scsi/dtc.c
@@ -229,7 +229,7 @@
instance->base = addr;
((struct NCR5380_hostdata *)(instance)->hostdata)->base = base;
- if (NCR5380_init(instance, FLAG_NO_DMA_FIXUP))
+ if (NCR5380_init(instance, 0))
goto out_unregister;
NCR5380_maybe_reset_bus(instance);
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index b8fc26d..aaeb6b6 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -348,23 +348,17 @@
flags = 0;
switch (overrides[current_override].board) {
case BOARD_NCR5380:
- flags = FLAG_NO_PSEUDO_DMA;
- break;
- case BOARD_NCR53C400:
- flags = FLAG_NO_DMA_FIXUP;
+ flags = FLAG_NO_PSEUDO_DMA | FLAG_DMA_FIXUP;
break;
case BOARD_NCR53C400A:
- flags = FLAG_NO_DMA_FIXUP;
ports = ncr_53c400a_ports;
magic = ncr_53c400a_magic;
break;
case BOARD_HP_C2502:
- flags = FLAG_NO_DMA_FIXUP;
ports = ncr_53c400a_ports;
magic = hp_c2502_magic;
break;
case BOARD_DTC3181E:
- flags = FLAG_NO_DMA_FIXUP;
ports = dtc_3181e_ports;
magic = ncr_53c400a_magic;
break;
diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c
index 512037e..7589fea 100644
--- a/drivers/scsi/pas16.c
+++ b/drivers/scsi/pas16.c
@@ -377,7 +377,7 @@
instance->io_port = io_port;
- if (NCR5380_init(instance, 0))
+ if (NCR5380_init(instance, FLAG_DMA_FIXUP))
goto out_unregister;
NCR5380_maybe_reset_bus(instance);
diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c
index 4615fda..6cb8bdd 100644
--- a/drivers/scsi/t128.c
+++ b/drivers/scsi/t128.c
@@ -210,7 +210,7 @@
instance->base = base;
((struct NCR5380_hostdata *)instance->hostdata)->base = p;
- if (NCR5380_init(instance, 0))
+ if (NCR5380_init(instance, FLAG_DMA_FIXUP))
goto out_unregister;
NCR5380_maybe_reset_bus(instance);