staging: comedi: amplc_pc236: Use IS_ENABLED()
Change conditional compilation on kernel config options to use the
IS_ENABLED() macro.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index 6cb06ec..5f1caac 100644
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -61,14 +61,6 @@
#define PC236_DRIVER_NAME "amplc_pc236"
-#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA_MODULE
-#define CONFIG_COMEDI_AMPLC_PC236_ISA
-#endif
-
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI_MODULE
-#define CONFIG_COMEDI_AMPLC_PC236_PCI
-#endif
-
/* PCI236 PCI configuration register information */
#define PCI_VENDOR_ID_AMPLICON 0x14dc
#define PCI_DEVICE_ID_AMPLICON_PCI236 0x0009
@@ -112,7 +104,7 @@
enum pc236_model model;
};
static const struct pc236_board pc236_boards[] = {
-#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
{
.name = "pc36at",
.fancy_name = "PC36AT",
@@ -120,7 +112,7 @@
.model = pc36at_model,
},
#endif
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
{
.name = "pci236",
.fancy_name = "PCI236",
@@ -138,7 +130,7 @@
#endif
};
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
static DEFINE_PCI_DEVICE_TABLE(pc236_pci_table) = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI236) },
{0}
@@ -157,7 +149,7 @@
feel free to suggest moving the variable to the struct comedi_device struct.
*/
struct pc236_private {
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
/* PCI device */
struct pci_dev *pci_dev;
unsigned long lcr_iobase; /* PLX PCI9052 config registers in PCIBAR1 */
@@ -185,7 +177,7 @@
.num_names = ARRAY_SIZE(pc236_boards),
};
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
static int __devinit driver_amplc_pc236_pci_probe(struct pci_dev *dev,
const struct pci_device_id
*ent)
@@ -240,7 +232,7 @@
module_exit(driver_amplc_pc236_cleanup_module);
#endif
-#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
static int pc236_request_region(unsigned minor, unsigned long from,
unsigned long extent);
#endif
@@ -263,7 +255,7 @@
* This function looks for a PCI device matching the requested board name,
* bus and slot.
*/
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
static int
pc236_find_pci(struct comedi_device *dev, int bus, int slot,
struct pci_dev **pci_dev_p)
@@ -332,7 +324,7 @@
struct comedi_subdevice *s;
unsigned long iobase = 0;
unsigned int irq = 0;
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
struct pci_dev *pci_dev = NULL;
int bus = 0, slot = 0;
#endif
@@ -353,14 +345,14 @@
}
/* Process options. */
switch (thisboard->bustype) {
-#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
case isa_bustype:
iobase = it->options[0];
irq = it->options[1];
share_irq = 0;
break;
#endif
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
case pci_bustype:
bus = it->options[0];
slot = it->options[1];
@@ -386,7 +378,7 @@
dev->board_name = thisboard->name;
/* Enable device and reserve I/O spaces. */
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
if (pci_dev) {
ret = comedi_pci_enable(pci_dev, PC236_DRIVER_NAME);
@@ -402,7 +394,7 @@
} else
#endif
{
-#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
ret = pc236_request_region(dev->minor, iobase, PC236_IO_SIZE);
if (ret < 0)
return ret;
@@ -452,12 +444,12 @@
}
printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
switch (thisboard->bustype) {
-#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
case isa_bustype:
printk("(base %#lx) ", iobase);
break;
#endif
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
case pci_bustype:
printk("(pci %s) ", pci_name(pci_dev));
break;
@@ -484,7 +476,7 @@
if (dev->subdevices)
subdev_8255_cleanup(dev, dev->subdevices + 0);
if (devpriv) {
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
if (devpriv->pci_dev) {
if (dev->iobase)
comedi_pci_disable(devpriv->pci_dev);
@@ -492,7 +484,7 @@
} else
#endif
{
-#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
if (dev->iobase)
release_region(dev->iobase, PC236_IO_SIZE);
#endif
@@ -504,7 +496,7 @@
* This function checks and requests an I/O region, reporting an error
* if there is a conflict.
*/
-#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
static int pc236_request_region(unsigned minor, unsigned long from,
unsigned long extent)
{
@@ -528,7 +520,7 @@
spin_lock_irqsave(&dev->spinlock, flags);
devpriv->enable_irq = 0;
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
if (devpriv->lcr_iobase)
outl(PCI236_INTR_DISABLE, devpriv->lcr_iobase + PLX9052_INTCSR);
#endif
@@ -546,7 +538,7 @@
spin_lock_irqsave(&dev->spinlock, flags);
devpriv->enable_irq = 1;
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
if (devpriv->lcr_iobase)
outl(PCI236_INTR_ENABLE, devpriv->lcr_iobase + PLX9052_INTCSR);
#endif
@@ -568,7 +560,7 @@
spin_lock_irqsave(&dev->spinlock, flags);
if (devpriv->enable_irq) {
retval = 1;
-#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
if (devpriv->lcr_iobase) {
if ((inl(devpriv->lcr_iobase + PLX9052_INTCSR)
& PLX9052_INTCSR_LI1STAT_MASK)