| /* |
| * arch/arm/mach-kirkwood/rd88f6281-setup.c |
| * |
| * Marvell RD-88F6281 Reference Board Setup |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/irq.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/ata_platform.h> |
| #include <linux/mv643xx_eth.h> |
| #include <linux/ethtool.h> |
| #include <net/dsa.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <mach/kirkwood.h> |
| #include <plat/mvsdio.h> |
| #include "common.h" |
| #include "mpp.h" |
| |
| static struct mtd_partition rd88f6281_nand_parts[] = { |
| { |
| .name = "u-boot", |
| .offset = 0, |
| .size = SZ_1M |
| }, { |
| .name = "uImage", |
| .offset = MTDPART_OFS_NXTBLK, |
| .size = SZ_2M |
| }, { |
| .name = "root", |
| .offset = MTDPART_OFS_NXTBLK, |
| .size = MTDPART_SIZ_FULL |
| }, |
| }; |
| |
| static struct mv643xx_eth_platform_data rd88f6281_ge00_data = { |
| .phy_addr = MV643XX_ETH_PHY_NONE, |
| .speed = SPEED_1000, |
| .duplex = DUPLEX_FULL, |
| }; |
| |
| static struct dsa_chip_data rd88f6281_switch_chip_data = { |
| .port_names[0] = "lan1", |
| .port_names[1] = "lan2", |
| .port_names[2] = "lan3", |
| .port_names[3] = "lan4", |
| .port_names[5] = "cpu", |
| }; |
| |
| static struct dsa_platform_data rd88f6281_switch_plat_data = { |
| .nr_chips = 1, |
| .chip = &rd88f6281_switch_chip_data, |
| }; |
| |
| static struct mv643xx_eth_platform_data rd88f6281_ge01_data = { |
| .phy_addr = MV643XX_ETH_PHY_ADDR(11), |
| }; |
| |
| static struct mv_sata_platform_data rd88f6281_sata_data = { |
| .n_ports = 2, |
| }; |
| |
| static struct mvsdio_platform_data rd88f6281_mvsdio_data = { |
| .gpio_card_detect = 28, |
| }; |
| |
| static unsigned int rd88f6281_mpp_config[] __initdata = { |
| MPP28_GPIO, |
| 0 |
| }; |
| |
| static void __init rd88f6281_init(void) |
| { |
| u32 dev, rev; |
| |
| /* |
| * Basic setup. Needs to be called early. |
| */ |
| kirkwood_init(); |
| kirkwood_mpp_conf(rd88f6281_mpp_config); |
| |
| kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25); |
| kirkwood_ehci_init(); |
| |
| kirkwood_ge00_init(&rd88f6281_ge00_data); |
| kirkwood_pcie_id(&dev, &rev); |
| if (rev == MV88F6281_REV_A0) { |
| rd88f6281_switch_chip_data.sw_addr = 10; |
| kirkwood_ge01_init(&rd88f6281_ge01_data); |
| } else { |
| rd88f6281_switch_chip_data.port_names[4] = "wan"; |
| } |
| kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ); |
| |
| kirkwood_sata_init(&rd88f6281_sata_data); |
| kirkwood_sdio_init(&rd88f6281_mvsdio_data); |
| kirkwood_uart0_init(); |
| } |
| |
| static int __init rd88f6281_pci_init(void) |
| { |
| if (machine_is_rd88f6281()) |
| kirkwood_pcie_init(KW_PCIE0); |
| |
| return 0; |
| } |
| subsys_initcall(rd88f6281_pci_init); |
| |
| MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board") |
| /* Maintainer: Saeed Bishara <saeed@marvell.com> */ |
| .phys_io = KIRKWOOD_REGS_PHYS_BASE, |
| .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, |
| .boot_params = 0x00000100, |
| .init_machine = rd88f6281_init, |
| .map_io = kirkwood_map_io, |
| .init_irq = kirkwood_init_irq, |
| .timer = &kirkwood_timer, |
| MACHINE_END |