ALSA: isa: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option. As result the __dev*
markings will be going away.
Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c
index d97d0f3..5376ebf 100644
--- a/sound/isa/sc6000.c
+++ b/sound/isa/sc6000.c
@@ -121,7 +121,7 @@
/*
* sc6000_irq_to_softcfg - Decode irq number into cfg code.
*/
-static __devinit unsigned char sc6000_irq_to_softcfg(int irq)
+static unsigned char sc6000_irq_to_softcfg(int irq)
{
unsigned char val = 0;
@@ -150,7 +150,7 @@
/*
* sc6000_dma_to_softcfg - Decode dma number into cfg code.
*/
-static __devinit unsigned char sc6000_dma_to_softcfg(int dma)
+static unsigned char sc6000_dma_to_softcfg(int dma)
{
unsigned char val = 0;
@@ -173,7 +173,7 @@
/*
* sc6000_mpu_irq_to_softcfg - Decode MPU-401 irq number into cfg code.
*/
-static __devinit unsigned char sc6000_mpu_irq_to_softcfg(int mpu_irq)
+static unsigned char sc6000_mpu_irq_to_softcfg(int mpu_irq)
{
unsigned char val = 0;
@@ -242,8 +242,8 @@
return -EIO;
}
-static int __devinit sc6000_dsp_get_answer(char __iomem *vport, int command,
- char *data, int data_len)
+static int sc6000_dsp_get_answer(char __iomem *vport, int command,
+ char *data, int data_len)
{
int len = 0;
@@ -269,7 +269,7 @@
return len ? len : -EIO;
}
-static int __devinit sc6000_dsp_reset(char __iomem *vport)
+static int sc6000_dsp_reset(char __iomem *vport)
{
iowrite8(1, vport + DSP_RESET);
udelay(10);
@@ -281,7 +281,7 @@
}
/* detection and initialization */
-static int __devinit sc6000_hw_cfg_write(char __iomem *vport, const int *cfg)
+static int sc6000_hw_cfg_write(char __iomem *vport, const int *cfg)
{
if (sc6000_write(vport, COMMAND_6C) < 0) {
snd_printk(KERN_WARNING "CMD 0x%x: failed!\n", COMMAND_6C);
@@ -345,8 +345,8 @@
return 0;
}
-static int __devinit sc6000_init_mss(char __iomem *vport, int config,
- char __iomem *vmss_port, int mss_config)
+static int sc6000_init_mss(char __iomem *vport, int config,
+ char __iomem *vmss_port, int mss_config)
{
if (sc6000_write(vport, DSP_INIT_MSS)) {
snd_printk(KERN_ERR "sc6000_init_mss [0x%x]: failed!\n",
@@ -364,9 +364,9 @@
return 0;
}
-static void __devinit sc6000_hw_cfg_encode(char __iomem *vport, int *cfg,
- long xport, long xmpu,
- long xmss_port, int joystick)
+static void sc6000_hw_cfg_encode(char __iomem *vport, int *cfg,
+ long xport, long xmpu,
+ long xmss_port, int joystick)
{
cfg[0] = 0;
cfg[1] = 0;
@@ -386,8 +386,8 @@
snd_printd("hw cfg %x, %x\n", cfg[0], cfg[1]);
}
-static int __devinit sc6000_init_board(char __iomem *vport,
- char __iomem *vmss_port, int dev)
+static int sc6000_init_board(char __iomem *vport,
+ char __iomem *vmss_port, int dev)
{
char answer[15];
char version[2];
@@ -467,7 +467,7 @@
return 0;
}
-static int __devinit snd_sc6000_mixer(struct snd_wss *chip)
+static int snd_sc6000_mixer(struct snd_wss *chip)
{
struct snd_card *card = chip->card;
struct snd_ctl_elem_id id1, id2;
@@ -502,7 +502,7 @@
return 0;
}
-static int __devinit snd_sc6000_match(struct device *devptr, unsigned int dev)
+static int snd_sc6000_match(struct device *devptr, unsigned int dev)
{
if (!enable[dev])
return 0;
@@ -545,7 +545,7 @@
return 1;
}
-static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
+static int snd_sc6000_probe(struct device *devptr, unsigned int dev)
{
static int possible_irqs[] = { 5, 7, 9, 10, 11, -1 };
static int possible_dmas[] = { 1, 3, 0, -1 };
@@ -687,7 +687,7 @@
return err;
}
-static int __devexit snd_sc6000_remove(struct device *devptr, unsigned int dev)
+static int snd_sc6000_remove(struct device *devptr, unsigned int dev)
{
struct snd_card *card = dev_get_drvdata(devptr);
char __iomem **vport = card->private_data;
@@ -706,7 +706,7 @@
static struct isa_driver snd_sc6000_driver = {
.match = snd_sc6000_match,
.probe = snd_sc6000_probe,
- .remove = __devexit_p(snd_sc6000_remove),
+ .remove = snd_sc6000_remove,
/* FIXME: suspend/resume */
.driver = {
.name = DRV_NAME,