Allowing UART DMA to be configured on i.MX53
The UART DMA was only being configured on i.MX6Q compatible devices. We
know that the DMA also works for i.MX53 devices, so enable uart DMA for
imx53 and let the device tree to configure if DMA should be used or not.
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index dc6d6e3..782b0e5 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -190,6 +190,7 @@
enum imx_uart_type {
IMX1_UART,
IMX21_UART,
+ IMX53_UART,
IMX6Q_UART,
};
@@ -247,6 +248,10 @@
.uts_reg = IMX21_UTS,
.devtype = IMX21_UART,
},
+ [IMX53_UART] = {
+ .uts_reg = IMX21_UTS,
+ .devtype = IMX53_UART,
+ },
[IMX6Q_UART] = {
.uts_reg = IMX21_UTS,
.devtype = IMX6Q_UART,
@@ -261,6 +266,9 @@
.name = "imx21-uart",
.driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART],
}, {
+ .name = "imx53-uart",
+ .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX53_UART],
+ }, {
.name = "imx6q-uart",
.driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX6Q_UART],
}, {
@@ -271,6 +279,7 @@
static const struct of_device_id imx_uart_dt_ids[] = {
{ .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], },
+ { .compatible = "fsl,imx53-uart", .data = &imx_uart_devdata[IMX53_UART], },
{ .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
{ .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], },
{ /* sentinel */ }
@@ -292,6 +301,11 @@
return sport->devdata->devtype == IMX21_UART;
}
+static inline int is_imx53_uart(struct imx_port *sport)
+{
+ return sport->devdata->devtype == IMX53_UART;
+}
+
static inline int is_imx6q_uart(struct imx_port *sport)
{
return sport->devdata->devtype == IMX6Q_UART;
@@ -1254,8 +1268,7 @@
writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
/* Can we enable the DMA support? */
- if (is_imx6q_uart(sport) && !uart_console(port) &&
- !sport->dma_is_inited)
+ if (!uart_console(port) && !sport->dma_is_inited)
imx_uart_dma_init(sport);
spin_lock_irqsave(&sport->port.lock, flags);