jme: Support WoL after shutdown
Adding shutdown function that setup wake if wol is enabled.
Add jme_phy_on in jme_set_100m_half in case it is shutting down
or suspending when interface is down(phy_off by default).
v2 updates:
Removed CONFIG_PM ifdef for jme_set_100m_half and jme_wait_link.
It would be nice if it can be applied to net-2.6 along with other patches
sent few days ago. If it is not appropriate, please ignore the net-2.6
request, and apply it to net-next-2.6 as previous patch. :)
Reported-and-helped-by: Сtac <Taoga@yandex.ru>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index d7a975e..d85edf3 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -1623,12 +1623,12 @@
return rc;
}
-#ifdef CONFIG_PM
static void
jme_set_100m_half(struct jme_adapter *jme)
{
u32 bmcr, tmp;
+ jme_phy_on(jme);
bmcr = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_BMCR);
tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |
BMCR_SPEED1000 | BMCR_FULLDPLX);
@@ -1656,7 +1656,6 @@
phylink = jme_linkstat_from_phy(jme);
}
}
-#endif
static inline void
jme_phy_off(struct jme_adapter *jme)
@@ -1664,6 +1663,21 @@
jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_BMCR, BMCR_PDOWN);
}
+static void
+jme_powersave_phy(struct jme_adapter *jme)
+{
+ if (jme->reg_pmcs) {
+ jme_set_100m_half(jme);
+
+ if (jme->reg_pmcs & (PMCS_LFEN | PMCS_LREN))
+ jme_wait_link(jme);
+
+ jwrite32(jme, JME_PMCS, jme->reg_pmcs);
+ } else {
+ jme_phy_off(jme);
+ }
+}
+
static int
jme_close(struct net_device *netdev)
{
@@ -2991,6 +3005,16 @@
}
+static void
+jme_shutdown(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct jme_adapter *jme = netdev_priv(netdev);
+
+ jme_powersave_phy(jme);
+ pci_pme_active(pdev, true);
+}
+
#ifdef CONFIG_PM
static int
jme_suspend(struct pci_dev *pdev, pm_message_t state)
@@ -3028,19 +3052,9 @@
tasklet_hi_enable(&jme->rxempty_task);
pci_save_state(pdev);
- if (jme->reg_pmcs) {
- jme_set_100m_half(jme);
-
- if (jme->reg_pmcs & (PMCS_LFEN | PMCS_LREN))
- jme_wait_link(jme);
-
- jwrite32(jme, JME_PMCS, jme->reg_pmcs);
-
- pci_enable_wake(pdev, PCI_D3cold, true);
- } else {
- jme_phy_off(jme);
- }
- pci_set_power_state(pdev, PCI_D3cold);
+ jme_powersave_phy(jme);
+ pci_enable_wake(jme->pdev, PCI_D3hot, true);
+ pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
@@ -3087,6 +3101,7 @@
.suspend = jme_suspend,
.resume = jme_resume,
#endif /* CONFIG_PM */
+ .shutdown = jme_shutdown,
};
static int __init