[SCSI] arcmsr: initial driver, version 1.20.00.13
arcmsr is a driver for the Areca Raid controller, a host based RAID
subsystem that speaks SCSI at the firmware level.
This patch is quite a clean up over the initial submission with
contributions from:
Randy Dunlap <rdunlap@xenotime.net>
Christoph Hellwig <hch@lst.de>
Matthew Wilcox <matthew@wil.cx>
Adrian Bunk <bunk@stusta.de>
Signed-off-by: Erich Chen <erich@areca.com.tw>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/Documentation/scsi/ChangeLog.arcmsr b/Documentation/scsi/ChangeLog.arcmsr
new file mode 100644
index 0000000..162c47f
--- /dev/null
+++ b/Documentation/scsi/ChangeLog.arcmsr
@@ -0,0 +1,56 @@
+**************************************************************************
+** History
+**
+** REV# DATE NAME DESCRIPTION
+** 1.00.00.00 3/31/2004 Erich Chen First release
+** 1.10.00.04 7/28/2004 Erich Chen modify for ioctl
+** 1.10.00.06 8/28/2004 Erich Chen modify for 2.6.x
+** 1.10.00.08 9/28/2004 Erich Chen modify for x86_64
+** 1.10.00.10 10/10/2004 Erich Chen bug fix for SMP & ioctl
+** 1.20.00.00 11/29/2004 Erich Chen bug fix with arcmsr_bus_reset when PHY error
+** 1.20.00.02 12/09/2004 Erich Chen bug fix with over 2T bytes RAID Volume
+** 1.20.00.04 1/09/2005 Erich Chen fits for Debian linux kernel version 2.2.xx
+** 1.20.00.05 2/20/2005 Erich Chen cleanly as look like a Linux driver at 2.6.x
+** thanks for peoples kindness comment
+** Kornel Wieliczek
+** Christoph Hellwig
+** Adrian Bunk
+** Andrew Morton
+** Christoph Hellwig
+** James Bottomley
+** Arjan van de Ven
+** 1.20.00.06 3/12/2005 Erich Chen fix with arcmsr_pci_unmap_dma "unsigned long" cast,
+** modify PCCB POOL allocated by "dma_alloc_coherent"
+** (Kornel Wieliczek's comment)
+** 1.20.00.07 3/23/2005 Erich Chen bug fix with arcmsr_scsi_host_template_init
+** occur segmentation fault,
+** if RAID adapter does not on PCI slot
+** and modprobe/rmmod this driver twice.
+** bug fix enormous stack usage (Adrian Bunk's comment)
+** 1.20.00.08 6/23/2005 Erich Chen bug fix with abort command,
+** in case of heavy loading when sata cable
+** working on low quality connection
+** 1.20.00.09 9/12/2005 Erich Chen bug fix with abort command handling, firmware version check
+** and firmware update notify for hardware bug fix
+** 1.20.00.10 9/23/2005 Erich Chen enhance sysfs function for change driver's max tag Q number.
+** add DMA_64BIT_MASK for backward compatible with all 2.6.x
+** add some useful message for abort command
+** add ioctl code 'ARCMSR_IOCTL_FLUSH_ADAPTER_CACHE'
+** customer can send this command for sync raid volume data
+** 1.20.00.11 9/29/2005 Erich Chen by comment of Arjan van de Ven fix incorrect msleep redefine
+** cast off sizeof(dma_addr_t) condition for 64bit pci_set_dma_mask
+** 1.20.00.12 9/30/2005 Erich Chen bug fix with 64bit platform's ccbs using if over 4G system memory
+** change 64bit pci_set_consistent_dma_mask into 32bit
+** increcct adapter count if adapter initialize fail.
+** miss edit at arcmsr_build_ccb....
+** psge += sizeof(struct _SG64ENTRY *) =>
+** psge += sizeof(struct _SG64ENTRY)
+** 64 bits sg entry would be incorrectly calculated
+** thanks Kornel Wieliczek give me kindly notify
+** and detail description
+** 1.20.00.13 11/15/2005 Erich Chen scheduling pending ccb with FIFO
+** change the architecture of arcmsr command queue list
+** for linux standard list
+** enable usage of pci message signal interrupt
+** follow Randy.Danlup kindness suggestion cleanup this code
+**************************************************************************
\ No newline at end of file
diff --git a/Documentation/scsi/arcmsr_spec.txt b/Documentation/scsi/arcmsr_spec.txt
new file mode 100644
index 0000000..5e00423
--- /dev/null
+++ b/Documentation/scsi/arcmsr_spec.txt
@@ -0,0 +1,574 @@
+*******************************************************************************
+** ARECA FIRMWARE SPEC
+*******************************************************************************
+** Usage of IOP331 adapter
+** (All In/Out is in IOP331's view)
+** 1. Message 0 --> InitThread message and retrun code
+** 2. Doorbell is used for RS-232 emulation
+** inDoorBell : bit0 -- data in ready
+** (DRIVER DATA WRITE OK)
+** bit1 -- data out has been read
+** (DRIVER DATA READ OK)
+** outDooeBell: bit0 -- data out ready
+** (IOP331 DATA WRITE OK)
+** bit1 -- data in has been read
+** (IOP331 DATA READ OK)
+** 3. Index Memory Usage
+** offset 0xf00 : for RS232 out (request buffer)
+** offset 0xe00 : for RS232 in (scratch buffer)
+** offset 0xa00 : for inbound message code message_rwbuffer
+** (driver send to IOP331)
+** offset 0xa00 : for outbound message code message_rwbuffer
+** (IOP331 send to driver)
+** 4. RS-232 emulation
+** Currently 128 byte buffer is used
+** 1st uint32_t : Data length (1--124)
+** Byte 4--127 : Max 124 bytes of data
+** 5. PostQ
+** All SCSI Command must be sent through postQ:
+** (inbound queue port) Request frame must be 32 bytes aligned
+** #bit27--bit31 => flag for post ccb
+** #bit0--bit26 => real address (bit27--bit31) of post arcmsr_cdb
+** bit31 :
+** 0 : 256 bytes frame
+** 1 : 512 bytes frame
+** bit30 :
+** 0 : normal request
+** 1 : BIOS request
+** bit29 : reserved
+** bit28 : reserved
+** bit27 : reserved
+** ---------------------------------------------------------------------------
+** (outbount queue port) Request reply
+** #bit27--bit31
+** => flag for reply
+** #bit0--bit26
+** => real address (bit27--bit31) of reply arcmsr_cdb
+** bit31 : must be 0 (for this type of reply)
+** bit30 : reserved for BIOS handshake
+** bit29 : reserved
+** bit28 :
+** 0 : no error, ignore AdapStatus/DevStatus/SenseData
+** 1 : Error, error code in AdapStatus/DevStatus/SenseData
+** bit27 : reserved
+** 6. BIOS request
+** All BIOS request is the same with request from PostQ
+** Except :
+** Request frame is sent from configuration space
+** offset: 0x78 : Request Frame (bit30 == 1)
+** offset: 0x18 : writeonly to generate
+** IRQ to IOP331
+** Completion of request:
+** (bit30 == 0, bit28==err flag)
+** 7. Definition of SGL entry (structure)
+** 8. Message1 Out - Diag Status Code (????)
+** 9. Message0 message code :
+** 0x00 : NOP
+** 0x01 : Get Config
+** ->offset 0xa00 :for outbound message code message_rwbuffer
+** (IOP331 send to driver)
+** Signature 0x87974060(4)
+** Request len 0x00000200(4)
+** numbers of queue 0x00000100(4)
+** SDRAM Size 0x00000100(4)-->256 MB
+** IDE Channels 0x00000008(4)
+** vendor 40 bytes char
+** model 8 bytes char
+** FirmVer 16 bytes char
+** Device Map 16 bytes char
+** FirmwareVersion DWORD <== Added for checking of
+** new firmware capability
+** 0x02 : Set Config
+** ->offset 0xa00 :for inbound message code message_rwbuffer
+** (driver send to IOP331)
+** Signature 0x87974063(4)
+** UPPER32 of Request Frame (4)-->Driver Only
+** 0x03 : Reset (Abort all queued Command)
+** 0x04 : Stop Background Activity
+** 0x05 : Flush Cache
+** 0x06 : Start Background Activity
+** (re-start if background is halted)
+** 0x07 : Check If Host Command Pending
+** (Novell May Need This Function)
+** 0x08 : Set controller time
+** ->offset 0xa00 : for inbound message code message_rwbuffer
+** (driver to IOP331)
+** byte 0 : 0xaa <-- signature
+** byte 1 : 0x55 <-- signature
+** byte 2 : year (04)
+** byte 3 : month (1..12)
+** byte 4 : date (1..31)
+** byte 5 : hour (0..23)
+** byte 6 : minute (0..59)
+** byte 7 : second (0..59)
+*******************************************************************************
+*******************************************************************************
+** RS-232 Interface for Areca Raid Controller
+** The low level command interface is exclusive with VT100 terminal
+** --------------------------------------------------------------------
+** 1. Sequence of command execution
+** --------------------------------------------------------------------
+** (A) Header : 3 bytes sequence (0x5E, 0x01, 0x61)
+** (B) Command block : variable length of data including length,
+** command code, data and checksum byte
+** (C) Return data : variable length of data
+** --------------------------------------------------------------------
+** 2. Command block
+** --------------------------------------------------------------------
+** (A) 1st byte : command block length (low byte)
+** (B) 2nd byte : command block length (high byte)
+** note ..command block length shouldn't > 2040 bytes,
+** length excludes these two bytes
+** (C) 3rd byte : command code
+** (D) 4th and following bytes : variable length data bytes
+** depends on command code
+** (E) last byte : checksum byte (sum of 1st byte until last data byte)
+** --------------------------------------------------------------------
+** 3. Command code and associated data
+** --------------------------------------------------------------------
+** The following are command code defined in raid controller Command
+** code 0x10--0x1? are used for system level management,
+** no password checking is needed and should be implemented in separate
+** well controlled utility and not for end user access.
+** Command code 0x20--0x?? always check the password,
+** password must be entered to enable these command.
+** enum
+** {
+** GUI_SET_SERIAL=0x10,
+** GUI_SET_VENDOR,
+** GUI_SET_MODEL,
+** GUI_IDENTIFY,
+** GUI_CHECK_PASSWORD,
+** GUI_LOGOUT,
+** GUI_HTTP,
+** GUI_SET_ETHERNET_ADDR,
+** GUI_SET_LOGO,
+** GUI_POLL_EVENT,
+** GUI_GET_EVENT,
+** GUI_GET_HW_MONITOR,
+** // GUI_QUICK_CREATE=0x20, (function removed)
+** GUI_GET_INFO_R=0x20,
+** GUI_GET_INFO_V,
+** GUI_GET_INFO_P,
+** GUI_GET_INFO_S,
+** GUI_CLEAR_EVENT,
+** GUI_MUTE_BEEPER=0x30,
+** GUI_BEEPER_SETTING,
+** GUI_SET_PASSWORD,
+** GUI_HOST_INTERFACE_MODE,
+** GUI_REBUILD_PRIORITY,
+** GUI_MAX_ATA_MODE,
+** GUI_RESET_CONTROLLER,
+** GUI_COM_PORT_SETTING,
+** GUI_NO_OPERATION,
+** GUI_DHCP_IP,
+** GUI_CREATE_PASS_THROUGH=0x40,
+** GUI_MODIFY_PASS_THROUGH,
+** GUI_DELETE_PASS_THROUGH,
+** GUI_IDENTIFY_DEVICE,
+** GUI_CREATE_RAIDSET=0x50,
+** GUI_DELETE_RAIDSET,
+** GUI_EXPAND_RAIDSET,
+** GUI_ACTIVATE_RAIDSET,
+** GUI_CREATE_HOT_SPARE,
+** GUI_DELETE_HOT_SPARE,
+** GUI_CREATE_VOLUME=0x60,
+** GUI_MODIFY_VOLUME,
+** GUI_DELETE_VOLUME,
+** GUI_START_CHECK_VOLUME,
+** GUI_STOP_CHECK_VOLUME
+** };
+** Command description :
+** GUI_SET_SERIAL : Set the controller serial#
+** byte 0,1 : length
+** byte 2 : command code 0x10
+** byte 3 : password length (should be 0x0f)
+** byte 4-0x13 : should be "ArEcATecHnoLogY"
+** byte 0x14--0x23 : Serial number string (must be 16 bytes)
+** GUI_SET_VENDOR : Set vendor string for the controller
+** byte 0,1 : length
+** byte 2 : command code 0x11
+** byte 3 : password length (should be 0x08)
+** byte 4-0x13 : should be "ArEcAvAr"
+** byte 0x14--0x3B : vendor string (must be 40 bytes)
+** GUI_SET_MODEL : Set the model name of the controller
+** byte 0,1 : length
+** byte 2 : command code 0x12
+** byte 3 : password length (should be 0x08)
+** byte 4-0x13 : should be "ArEcAvAr"
+** byte 0x14--0x1B : model string (must be 8 bytes)
+** GUI_IDENTIFY : Identify device
+** byte 0,1 : length
+** byte 2 : command code 0x13
+** return "Areca RAID Subsystem "
+** GUI_CHECK_PASSWORD : Verify password
+** byte 0,1 : length
+** byte 2 : command code 0x14
+** byte 3 : password length
+** byte 4-0x?? : user password to be checked
+** GUI_LOGOUT : Logout GUI (force password checking on next command)
+** byte 0,1 : length
+** byte 2 : command code 0x15
+** GUI_HTTP : HTTP interface (reserved for Http proxy service)(0x16)
+**
+** GUI_SET_ETHERNET_ADDR : Set the ethernet MAC address
+** byte 0,1 : length
+** byte 2 : command code 0x17
+** byte 3 : password length (should be 0x08)
+** byte 4-0x13 : should be "ArEcAvAr"
+** byte 0x14--0x19 : Ethernet MAC address (must be 6 bytes)
+** GUI_SET_LOGO : Set logo in HTTP
+** byte 0,1 : length
+** byte 2 : command code 0x18
+** byte 3 : Page# (0/1/2/3) (0xff --> clear OEM logo)
+** byte 4/5/6/7 : 0x55/0xaa/0xa5/0x5a
+** byte 8 : TITLE.JPG data (each page must be 2000 bytes)
+** note page0 1st 2 byte must be
+** actual length of the JPG file
+** GUI_POLL_EVENT : Poll If Event Log Changed
+** byte 0,1 : length
+** byte 2 : command code 0x19
+** GUI_GET_EVENT : Read Event
+** byte 0,1 : length
+** byte 2 : command code 0x1a
+** byte 3 : Event Page (0:1st page/1/2/3:last page)
+** GUI_GET_HW_MONITOR : Get HW monitor data
+** byte 0,1 : length
+** byte 2 : command code 0x1b
+** byte 3 : # of FANs(example 2)
+** byte 4 : # of Voltage sensor(example 3)
+** byte 5 : # of temperature sensor(example 2)
+** byte 6 : # of power
+** byte 7/8 : Fan#0 (RPM)
+** byte 9/10 : Fan#1
+** byte 11/12 : Voltage#0 original value in *1000
+** byte 13/14 : Voltage#0 value
+** byte 15/16 : Voltage#1 org
+** byte 17/18 : Voltage#1
+** byte 19/20 : Voltage#2 org
+** byte 21/22 : Voltage#2
+** byte 23 : Temp#0
+** byte 24 : Temp#1
+** byte 25 : Power indicator (bit0 : power#0,
+** bit1 : power#1)
+** byte 26 : UPS indicator
+** GUI_QUICK_CREATE : Quick create raid/volume set
+** byte 0,1 : length
+** byte 2 : command code 0x20
+** byte 3/4/5/6 : raw capacity
+** byte 7 : raid level
+** byte 8 : stripe size
+** byte 9 : spare
+** byte 10/11/12/13: device mask (the devices to create raid/volume)
+** This function is removed, application like
+** to implement quick create function
+** need to use GUI_CREATE_RAIDSET and GUI_CREATE_VOLUMESET function.
+** GUI_GET_INFO_R : Get Raid Set Information
+** byte 0,1 : length
+** byte 2 : command code 0x20
+** byte 3 : raidset#
+** typedef struct sGUI_RAIDSET
+** {
+** BYTE grsRaidSetName[16];
+** DWORD grsCapacity;
+** DWORD grsCapacityX;
+** DWORD grsFailMask;
+** BYTE grsDevArray[32];
+** BYTE grsMemberDevices;
+** BYTE grsNewMemberDevices;
+** BYTE grsRaidState;
+** BYTE grsVolumes;
+** BYTE grsVolumeList[16];
+** BYTE grsRes1;
+** BYTE grsRes2;
+** BYTE grsRes3;
+** BYTE grsFreeSegments;
+** DWORD grsRawStripes[8];
+** DWORD grsRes4;
+** DWORD grsRes5; // Total to 128 bytes
+** DWORD grsRes6; // Total to 128 bytes
+** } sGUI_RAIDSET, *pGUI_RAIDSET;
+** GUI_GET_INFO_V : Get Volume Set Information
+** byte 0,1 : length
+** byte 2 : command code 0x21
+** byte 3 : volumeset#
+** typedef struct sGUI_VOLUMESET
+** {
+** BYTE gvsVolumeName[16]; // 16
+** DWORD gvsCapacity;
+** DWORD gvsCapacityX;
+** DWORD gvsFailMask;
+** DWORD gvsStripeSize;
+** DWORD gvsNewFailMask;
+** DWORD gvsNewStripeSize;
+** DWORD gvsVolumeStatus;
+** DWORD gvsProgress; // 32
+** sSCSI_ATTR gvsScsi;
+** BYTE gvsMemberDisks;
+** BYTE gvsRaidLevel; // 8
+** BYTE gvsNewMemberDisks;
+** BYTE gvsNewRaidLevel;
+** BYTE gvsRaidSetNumber;
+** BYTE gvsRes0; // 4
+** BYTE gvsRes1[4]; // 64 bytes
+** } sGUI_VOLUMESET, *pGUI_VOLUMESET;
+** GUI_GET_INFO_P : Get Physical Drive Information
+** byte 0,1 : length
+** byte 2 : command code 0x22
+** byte 3 : drive # (from 0 to max-channels - 1)
+** typedef struct sGUI_PHY_DRV
+** {
+** BYTE gpdModelName[40];
+** BYTE gpdSerialNumber[20];
+** BYTE gpdFirmRev[8];
+** DWORD gpdCapacity;
+** DWORD gpdCapacityX; // Reserved for expansion
+** BYTE gpdDeviceState;
+** BYTE gpdPioMode;
+** BYTE gpdCurrentUdmaMode;
+** BYTE gpdUdmaMode;
+** BYTE gpdDriveSelect;
+** BYTE gpdRaidNumber; // 0xff if not belongs to a raid set
+** sSCSI_ATTR gpdScsi;
+** BYTE gpdReserved[40]; // Total to 128 bytes
+** } sGUI_PHY_DRV, *pGUI_PHY_DRV;
+** GUI_GET_INFO_S : Get System Information
+** byte 0,1 : length
+** byte 2 : command code 0x23
+** typedef struct sCOM_ATTR
+** {
+** BYTE comBaudRate;
+** BYTE comDataBits;
+** BYTE comStopBits;
+** BYTE comParity;
+** BYTE comFlowControl;
+** } sCOM_ATTR, *pCOM_ATTR;
+** typedef struct sSYSTEM_INFO
+** {
+** BYTE gsiVendorName[40];
+** BYTE gsiSerialNumber[16];
+** BYTE gsiFirmVersion[16];
+** BYTE gsiBootVersion[16];
+** BYTE gsiMbVersion[16];
+** BYTE gsiModelName[8];
+** BYTE gsiLocalIp[4];
+** BYTE gsiCurrentIp[4];
+** DWORD gsiTimeTick;
+** DWORD gsiCpuSpeed;
+** DWORD gsiICache;
+** DWORD gsiDCache;
+** DWORD gsiScache;
+** DWORD gsiMemorySize;
+** DWORD gsiMemorySpeed;
+** DWORD gsiEvents;
+** BYTE gsiMacAddress[6];
+** BYTE gsiDhcp;
+** BYTE gsiBeeper;
+** BYTE gsiChannelUsage;
+** BYTE gsiMaxAtaMode;
+** BYTE gsiSdramEcc; // 1:if ECC enabled
+** BYTE gsiRebuildPriority;
+** sCOM_ATTR gsiComA; // 5 bytes
+** sCOM_ATTR gsiComB; // 5 bytes
+** BYTE gsiIdeChannels;
+** BYTE gsiScsiHostChannels;
+** BYTE gsiIdeHostChannels;
+** BYTE gsiMaxVolumeSet;
+** BYTE gsiMaxRaidSet;
+** BYTE gsiEtherPort; // 1:if ether net port supported
+** BYTE gsiRaid6Engine; // 1:Raid6 engine supported
+** BYTE gsiRes[75];
+** } sSYSTEM_INFO, *pSYSTEM_INFO;
+** GUI_CLEAR_EVENT : Clear System Event
+** byte 0,1 : length
+** byte 2 : command code 0x24
+** GUI_MUTE_BEEPER : Mute current beeper
+** byte 0,1 : length
+** byte 2 : command code 0x30
+** GUI_BEEPER_SETTING : Disable beeper
+** byte 0,1 : length
+** byte 2 : command code 0x31
+** byte 3 : 0->disable, 1->enable
+** GUI_SET_PASSWORD : Change password
+** byte 0,1 : length
+** byte 2 : command code 0x32
+** byte 3 : pass word length ( must <= 15 )
+** byte 4 : password (must be alpha-numerical)
+** GUI_HOST_INTERFACE_MODE : Set host interface mode
+** byte 0,1 : length
+** byte 2 : command code 0x33
+** byte 3 : 0->Independent, 1->cluster
+** GUI_REBUILD_PRIORITY : Set rebuild priority
+** byte 0,1 : length
+** byte 2 : command code 0x34
+** byte 3 : 0/1/2/3 (low->high)
+** GUI_MAX_ATA_MODE : Set maximum ATA mode to be used
+** byte 0,1 : length
+** byte 2 : command code 0x35
+** byte 3 : 0/1/2/3 (133/100/66/33)
+** GUI_RESET_CONTROLLER : Reset Controller
+** byte 0,1 : length
+** byte 2 : command code 0x36
+** *Response with VT100 screen (discard it)
+** GUI_COM_PORT_SETTING : COM port setting
+** byte 0,1 : length
+** byte 2 : command code 0x37
+** byte 3 : 0->COMA (term port),
+** 1->COMB (debug port)
+** byte 4 : 0/1/2/3/4/5/6/7
+** (1200/2400/4800/9600/19200/38400/57600/115200)
+** byte 5 : data bit
+** (0:7 bit, 1:8 bit : must be 8 bit)
+** byte 6 : stop bit (0:1, 1:2 stop bits)
+** byte 7 : parity (0:none, 1:off, 2:even)
+** byte 8 : flow control
+** (0:none, 1:xon/xoff, 2:hardware => must use none)
+** GUI_NO_OPERATION : No operation
+** byte 0,1 : length
+** byte 2 : command code 0x38
+** GUI_DHCP_IP : Set DHCP option and local IP address
+** byte 0,1 : length
+** byte 2 : command code 0x39
+** byte 3 : 0:dhcp disabled, 1:dhcp enabled
+** byte 4/5/6/7 : IP address
+** GUI_CREATE_PASS_THROUGH : Create pass through disk
+** byte 0,1 : length
+** byte 2 : command code 0x40
+** byte 3 : device #
+** byte 4 : scsi channel (0/1)
+** byte 5 : scsi id (0-->15)
+** byte 6 : scsi lun (0-->7)
+** byte 7 : tagged queue (1 : enabled)
+** byte 8 : cache mode (1 : enabled)
+** byte 9 : max speed (0/1/2/3/4,
+** async/20/40/80/160 for scsi)
+** (0/1/2/3/4, 33/66/100/133/150 for ide )
+** GUI_MODIFY_PASS_THROUGH : Modify pass through disk
+** byte 0,1 : length
+** byte 2 : command code 0x41
+** byte 3 : device #
+** byte 4 : scsi channel (0/1)
+** byte 5 : scsi id (0-->15)
+** byte 6 : scsi lun (0-->7)
+** byte 7 : tagged queue (1 : enabled)
+** byte 8 : cache mode (1 : enabled)
+** byte 9 : max speed (0/1/2/3/4,
+** async/20/40/80/160 for scsi)
+** (0/1/2/3/4, 33/66/100/133/150 for ide )
+** GUI_DELETE_PASS_THROUGH : Delete pass through disk
+** byte 0,1 : length
+** byte 2 : command code 0x42
+** byte 3 : device# to be deleted
+** GUI_IDENTIFY_DEVICE : Identify Device
+** byte 0,1 : length
+** byte 2 : command code 0x43
+** byte 3 : Flash Method
+** (0:flash selected, 1:flash not selected)
+** byte 4/5/6/7 : IDE device mask to be flashed
+** note .... no response data available
+** GUI_CREATE_RAIDSET : Create Raid Set
+** byte 0,1 : length
+** byte 2 : command code 0x50
+** byte 3/4/5/6 : device mask
+** byte 7-22 : raidset name (if byte 7 == 0:use default)
+** GUI_DELETE_RAIDSET : Delete Raid Set
+** byte 0,1 : length
+** byte 2 : command code 0x51
+** byte 3 : raidset#
+** GUI_EXPAND_RAIDSET : Expand Raid Set
+** byte 0,1 : length
+** byte 2 : command code 0x52
+** byte 3 : raidset#
+** byte 4/5/6/7 : device mask for expansion
+** byte 8/9/10 : (8:0 no change, 1 change, 0xff:terminate,
+** 9:new raid level,
+** 10:new stripe size
+** 0/1/2/3/4/5->4/8/16/32/64/128K )
+** byte 11/12/13 : repeat for each volume in the raidset
+** GUI_ACTIVATE_RAIDSET : Activate incomplete raid set
+** byte 0,1 : length
+** byte 2 : command code 0x53
+** byte 3 : raidset#
+** GUI_CREATE_HOT_SPARE : Create hot spare disk
+** byte 0,1 : length
+** byte 2 : command code 0x54
+** byte 3/4/5/6 : device mask for hot spare creation
+** GUI_DELETE_HOT_SPARE : Delete hot spare disk
+** byte 0,1 : length
+** byte 2 : command code 0x55
+** byte 3/4/5/6 : device mask for hot spare deletion
+** GUI_CREATE_VOLUME : Create volume set
+** byte 0,1 : length
+** byte 2 : command code 0x60
+** byte 3 : raidset#
+** byte 4-19 : volume set name
+** (if byte4 == 0, use default)
+** byte 20-27 : volume capacity (blocks)
+** byte 28 : raid level
+** byte 29 : stripe size
+** (0/1/2/3/4/5->4/8/16/32/64/128K)
+** byte 30 : channel
+** byte 31 : ID
+** byte 32 : LUN
+** byte 33 : 1 enable tag
+** byte 34 : 1 enable cache
+** byte 35 : speed
+** (0/1/2/3/4->async/20/40/80/160 for scsi)
+** (0/1/2/3/4->33/66/100/133/150 for IDE )
+** byte 36 : 1 to select quick init
+**
+** GUI_MODIFY_VOLUME : Modify volume Set
+** byte 0,1 : length
+** byte 2 : command code 0x61
+** byte 3 : volumeset#
+** byte 4-19 : new volume set name
+** (if byte4 == 0, not change)
+** byte 20-27 : new volume capacity (reserved)
+** byte 28 : new raid level
+** byte 29 : new stripe size
+** (0/1/2/3/4/5->4/8/16/32/64/128K)
+** byte 30 : new channel
+** byte 31 : new ID
+** byte 32 : new LUN
+** byte 33 : 1 enable tag
+** byte 34 : 1 enable cache
+** byte 35 : speed
+** (0/1/2/3/4->async/20/40/80/160 for scsi)
+** (0/1/2/3/4->33/66/100/133/150 for IDE )
+** GUI_DELETE_VOLUME : Delete volume set
+** byte 0,1 : length
+** byte 2 : command code 0x62
+** byte 3 : volumeset#
+** GUI_START_CHECK_VOLUME : Start volume consistency check
+** byte 0,1 : length
+** byte 2 : command code 0x63
+** byte 3 : volumeset#
+** GUI_STOP_CHECK_VOLUME : Stop volume consistency check
+** byte 0,1 : length
+** byte 2 : command code 0x64
+** ---------------------------------------------------------------------
+** 4. Returned data
+** ---------------------------------------------------------------------
+** (A) Header : 3 bytes sequence (0x5E, 0x01, 0x61)
+** (B) Length : 2 bytes
+** (low byte 1st, excludes length and checksum byte)
+** (C) status or data :
+** <1> If length == 1 ==> 1 byte status code
+** #define GUI_OK 0x41
+** #define GUI_RAIDSET_NOT_NORMAL 0x42
+** #define GUI_VOLUMESET_NOT_NORMAL 0x43
+** #define GUI_NO_RAIDSET 0x44
+** #define GUI_NO_VOLUMESET 0x45
+** #define GUI_NO_PHYSICAL_DRIVE 0x46
+** #define GUI_PARAMETER_ERROR 0x47
+** #define GUI_UNSUPPORTED_COMMAND 0x48
+** #define GUI_DISK_CONFIG_CHANGED 0x49
+** #define GUI_INVALID_PASSWORD 0x4a
+** #define GUI_NO_DISK_SPACE 0x4b
+** #define GUI_CHECKSUM_ERROR 0x4c
+** #define GUI_PASSWORD_REQUIRED 0x4d
+** <2> If length > 1 ==>
+** data block returned from controller
+** and the contents depends on the command code
+** (E) Checksum : checksum of length and status or data byte
+**************************************************************************
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 96a81cd..d61662c 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -469,6 +469,20 @@
To compile this driver as a module, choose M here: the
module will be called in2000.
+config SCSI_ARCMSR
+ tristate "ARECA ARC11X0[PCI-X]/ARC12X0[PCI-EXPRESS] SATA-RAID support"
+ depends on PCI && SCSI
+ help
+ This driver supports all of ARECA's SATA RAID controller cards.
+ This is an ARECA-maintained driver by Erich Chen.
+ If you have any problems, please mail to: < erich@areca.com.tw >
+ Areca supports Linux RAID config tools.
+
+ < http://www.areca.com.tw >
+
+ To compile this driver as a module, choose M here: the
+ module will be called arcmsr (modprobe arcmsr).
+
source "drivers/scsi/megaraid/Kconfig.megaraid"
config SCSI_SATA
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index ebd0cf0..b2de9bf 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -59,6 +59,7 @@
obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o
obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o
obj-$(CONFIG_SCSI_U14_34F) += u14-34f.o
+obj-$(CONFIG_SCSI_ARCMSR) += arcmsr/
obj-$(CONFIG_SCSI_ULTRASTOR) += ultrastor.o
obj-$(CONFIG_SCSI_AHA152X) += aha152x.o
obj-$(CONFIG_SCSI_AHA1542) += aha1542.o
diff --git a/drivers/scsi/arcmsr/Makefile b/drivers/scsi/arcmsr/Makefile
new file mode 100644
index 0000000..721aced
--- /dev/null
+++ b/drivers/scsi/arcmsr/Makefile
@@ -0,0 +1,6 @@
+# File: drivers/arcmsr/Makefile
+# Makefile for the ARECA PCI-X PCI-EXPRESS SATA RAID controllers SCSI driver.
+
+arcmsr-objs := arcmsr_attr.o arcmsr_hba.o
+
+obj-$(CONFIG_SCSI_ARCMSR) := arcmsr.o
diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
new file mode 100644
index 0000000..aff96db
--- /dev/null
+++ b/drivers/scsi/arcmsr/arcmsr.h
@@ -0,0 +1,472 @@
+/*
+*******************************************************************************
+** O.S : Linux
+** FILE NAME : arcmsr.h
+** BY : Erich Chen
+** Description: SCSI RAID Device Driver for
+** ARECA RAID Host adapter
+*******************************************************************************
+** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved.
+**
+** Web site: www.areca.com.tw
+** E-mail: erich@areca.com.tw
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License version 2 as
+** published by the Free Software Foundation.
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+*******************************************************************************
+** Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions
+** are met:
+** 1. Redistributions of source code must retain the above copyright
+** notice, this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright
+** notice, this list of conditions and the following disclaimer in the
+** documentation and/or other materials provided with the distribution.
+** 3. The name of the author may not be used to endorse or promote products
+** derived from this software without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT
+** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+**(INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF
+** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************
+*/
+#include <linux/interrupt.h>
+
+struct class_device_attribute;
+
+#define ARCMSR_MAX_OUTSTANDING_CMD 256
+#define ARCMSR_MAX_FREECCB_NUM 288
+#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.13"
+#define ARCMSR_SCSI_INITIATOR_ID 255
+#define ARCMSR_MAX_XFER_SECTORS 512
+#define ARCMSR_MAX_TARGETID 17
+#define ARCMSR_MAX_TARGETLUN 8
+#define ARCMSR_MAX_CMD_PERLUN ARCMSR_MAX_OUTSTANDING_CMD
+#define ARCMSR_MAX_QBUFFER 4096
+#define ARCMSR_MAX_SG_ENTRIES 38
+
+/*
+*******************************************************************************
+** split 64bits dma addressing
+*******************************************************************************
+*/
+#define dma_addr_hi32(addr) (uint32_t) ((addr>>16)>>16)
+#define dma_addr_lo32(addr) (uint32_t) (addr & 0xffffffff)
+/*
+*******************************************************************************
+** MESSAGE CONTROL CODE
+*******************************************************************************
+*/
+struct CMD_MESSAGE
+{
+ uint32_t HeaderLength;
+ uint8_t Signature[8];
+ uint32_t Timeout;
+ uint32_t ControlCode;
+ uint32_t ReturnCode;
+ uint32_t Length;
+};
+/*
+*******************************************************************************
+** IOP Message Transfer Data for user space
+*******************************************************************************
+*/
+struct CMD_MESSAGE_FIELD
+{
+ struct CMD_MESSAGE cmdmessage;
+ uint8_t messagedatabuffer[1032];
+};
+/* IOP message transfer */
+#define ARCMSR_MESSAGE_FAIL 0x0001
+/* DeviceType */
+#define ARECA_SATA_RAID 0x90000000
+/* FunctionCode */
+#define FUNCTION_READ_RQBUFFER 0x0801
+#define FUNCTION_WRITE_WQBUFFER 0x0802
+#define FUNCTION_CLEAR_RQBUFFER 0x0803
+#define FUNCTION_CLEAR_WQBUFFER 0x0804
+#define FUNCTION_CLEAR_ALLQBUFFER 0x0805
+#define FUNCTION_RETURN_CODE_3F 0x0806
+#define FUNCTION_SAY_HELLO 0x0807
+#define FUNCTION_SAY_GOODBYE 0x0808
+#define FUNCTION_FLUSH_ADAPTER_CACHE 0x0809
+/* ARECA IO CONTROL CODE*/
+#define ARCMSR_MESSAGE_READ_RQBUFFER \
+ ARECA_SATA_RAID | FUNCTION_READ_RQBUFFER
+#define ARCMSR_MESSAGE_WRITE_WQBUFFER \
+ ARECA_SATA_RAID | FUNCTION_WRITE_WQBUFFER
+#define ARCMSR_MESSAGE_CLEAR_RQBUFFER \
+ ARECA_SATA_RAID | FUNCTION_CLEAR_RQBUFFER
+#define ARCMSR_MESSAGE_CLEAR_WQBUFFER \
+ ARECA_SATA_RAID | FUNCTION_CLEAR_WQBUFFER
+#define ARCMSR_MESSAGE_CLEAR_ALLQBUFFER \
+ ARECA_SATA_RAID | FUNCTION_CLEAR_ALLQBUFFER
+#define ARCMSR_MESSAGE_RETURN_CODE_3F \
+ ARECA_SATA_RAID | FUNCTION_RETURN_CODE_3F
+#define ARCMSR_MESSAGE_SAY_HELLO \
+ ARECA_SATA_RAID | FUNCTION_SAY_HELLO
+#define ARCMSR_MESSAGE_SAY_GOODBYE \
+ ARECA_SATA_RAID | FUNCTION_SAY_GOODBYE
+#define ARCMSR_MESSAGE_FLUSH_ADAPTER_CACHE \
+ ARECA_SATA_RAID | FUNCTION_FLUSH_ADAPTER_CACHE
+/* ARECA IOCTL ReturnCode */
+#define ARCMSR_MESSAGE_RETURNCODE_OK 0x00000001
+#define ARCMSR_MESSAGE_RETURNCODE_ERROR 0x00000006
+#define ARCMSR_MESSAGE_RETURNCODE_3F 0x0000003F
+/*
+*************************************************************
+** structure for holding DMA address data
+*************************************************************
+*/
+#define IS_SG64_ADDR 0x01000000 /* bit24 */
+struct SG32ENTRY
+{
+ uint32_t length;
+ uint32_t address;
+};
+struct SG64ENTRY
+{
+ uint32_t length;
+ uint32_t address;
+ uint32_t addresshigh;
+};
+struct SGENTRY_UNION
+{
+ union
+ {
+ struct SG32ENTRY sg32entry;
+ struct SG64ENTRY sg64entry;
+ }u;
+};
+/*
+********************************************************************
+** Q Buffer of IOP Message Transfer
+********************************************************************
+*/
+struct QBUFFER
+{
+ uint32_t data_len;
+ uint8_t data[124];
+};
+/*
+*******************************************************************************
+** FIRMWARE INFO
+*******************************************************************************
+*/
+struct FIRMWARE_INFO
+{
+ uint32_t signature; /*0, 00-03*/
+ uint32_t request_len; /*1, 04-07*/
+ uint32_t numbers_queue; /*2, 08-11*/
+ uint32_t sdram_size; /*3, 12-15*/
+ uint32_t ide_channels; /*4, 16-19*/
+ char vendor[40]; /*5, 20-59*/
+ char model[8]; /*15, 60-67*/
+ char firmware_ver[16]; /*17, 68-83*/
+ char device_map[16]; /*21, 84-99*/
+};
+/* signature of set and get firmware config */
+#define ARCMSR_SIGNATURE_GET_CONFIG 0x87974060
+#define ARCMSR_SIGNATURE_SET_CONFIG 0x87974063
+/* message code of inbound message register */
+#define ARCMSR_INBOUND_MESG0_NOP 0x00000000
+#define ARCMSR_INBOUND_MESG0_GET_CONFIG 0x00000001
+#define ARCMSR_INBOUND_MESG0_SET_CONFIG 0x00000002
+#define ARCMSR_INBOUND_MESG0_ABORT_CMD 0x00000003
+#define ARCMSR_INBOUND_MESG0_STOP_BGRB 0x00000004
+#define ARCMSR_INBOUND_MESG0_FLUSH_CACHE 0x00000005
+#define ARCMSR_INBOUND_MESG0_START_BGRB 0x00000006
+#define ARCMSR_INBOUND_MESG0_CHK331PENDING 0x00000007
+#define ARCMSR_INBOUND_MESG0_SYNC_TIMER 0x00000008
+/* doorbell interrupt generator */
+#define ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK 0x00000001
+#define ARCMSR_INBOUND_DRIVER_DATA_READ_OK 0x00000002
+#define ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK 0x00000001
+#define ARCMSR_OUTBOUND_IOP331_DATA_READ_OK 0x00000002
+/* ccb areca cdb flag */
+#define ARCMSR_CCBPOST_FLAG_SGL_BSIZE 0x80000000
+#define ARCMSR_CCBPOST_FLAG_IAM_BIOS 0x40000000
+#define ARCMSR_CCBREPLY_FLAG_IAM_BIOS 0x40000000
+#define ARCMSR_CCBREPLY_FLAG_ERROR 0x10000000
+/* outbound firmware ok */
+#define ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK 0x80000000
+/*
+*******************************************************************************
+** ARECA SCSI COMMAND DESCRIPTOR BLOCK size 0x1F8 (504)
+*******************************************************************************
+*/
+struct ARCMSR_CDB
+{
+ uint8_t Bus;
+ uint8_t TargetID;
+ uint8_t LUN;
+ uint8_t Function;
+
+ uint8_t CdbLength;
+ uint8_t sgcount;
+ uint8_t Flags;
+#define ARCMSR_CDB_FLAG_SGL_BSIZE 0x01
+#define ARCMSR_CDB_FLAG_BIOS 0x02
+#define ARCMSR_CDB_FLAG_WRITE 0x04
+#define ARCMSR_CDB_FLAG_SIMPLEQ 0x00
+#define ARCMSR_CDB_FLAG_HEADQ 0x08
+#define ARCMSR_CDB_FLAG_ORDEREDQ 0x10
+ uint8_t Reserved1;
+
+ uint32_t Context;
+ uint32_t DataLength;
+
+ uint8_t Cdb[16];
+
+ uint8_t DeviceStatus;
+#define ARCMSR_DEV_CHECK_CONDITION 0x02
+#define ARCMSR_DEV_SELECT_TIMEOUT 0xF0
+#define ARCMSR_DEV_ABORTED 0xF1
+#define ARCMSR_DEV_INIT_FAIL 0xF2
+ uint8_t SenseData[15];
+
+ union
+ {
+ struct SG32ENTRY sg32entry[ARCMSR_MAX_SG_ENTRIES];
+ struct SG64ENTRY sg64entry[ARCMSR_MAX_SG_ENTRIES];
+ } u;
+};
+/*
+*******************************************************************************
+** Messaging Unit (MU) of the Intel R 80331 I/O processor (80331)
+*******************************************************************************
+*/
+struct MessageUnit
+{
+ uint32_t resrved0[4]; /*0000 000F*/
+ uint32_t inbound_msgaddr0; /*0010 0013*/
+ uint32_t inbound_msgaddr1; /*0014 0017*/
+ uint32_t outbound_msgaddr0; /*0018 001B*/
+ uint32_t outbound_msgaddr1; /*001C 001F*/
+ uint32_t inbound_doorbell; /*0020 0023*/
+ uint32_t inbound_intstatus; /*0024 0027*/
+ uint32_t inbound_intmask; /*0028 002B*/
+ uint32_t outbound_doorbell; /*002C 002F*/
+ uint32_t outbound_intstatus; /*0030 0033*/
+ uint32_t outbound_intmask; /*0034 0037*/
+ uint32_t reserved1[2]; /*0038 003F*/
+ uint32_t inbound_queueport; /*0040 0043*/
+ uint32_t outbound_queueport; /*0044 0047*/
+ uint32_t reserved2[2]; /*0048 004F*/
+ uint32_t reserved3[492]; /*0050 07FF 492*/
+ uint32_t reserved4[128]; /*0800 09FF 128*/
+ uint32_t message_rwbuffer[256]; /*0a00 0DFF 256*/
+ uint32_t message_wbuffer[32]; /*0E00 0E7F 32*/
+ uint32_t reserved5[32]; /*0E80 0EFF 32*/
+ uint32_t message_rbuffer[32]; /*0F00 0F7F 32*/
+ uint32_t reserved6[32]; /*0F80 0FFF 32*/
+};
+/*
+*******************************************************************************
+** Adapter Control Block
+*******************************************************************************
+*/
+struct AdapterControlBlock
+{
+ struct pci_dev * pdev;
+ struct Scsi_Host * host;
+ unsigned long vir2phy_offset;
+ /* Offset is used in making arc cdb physical to virtual calculations */
+ uint32_t outbound_int_enable;
+
+ struct MessageUnit __iomem * pmu;
+ /* message unit ATU inbound base address0 */
+
+ uint32_t acb_flags;
+#define ACB_F_SCSISTOPADAPTER 0x0001
+#define ACB_F_MSG_STOP_BGRB 0x0002
+ /* stop RAID background rebuild */
+#define ACB_F_MSG_START_BGRB 0x0004
+ /* stop RAID background rebuild */
+#define ACB_F_IOPDATA_OVERFLOW 0x0008
+ /* iop message data rqbuffer overflow */
+#define ACB_F_MESSAGE_WQBUFFER_CLEARED 0x0010
+ /* message clear wqbuffer */
+#define ACB_F_MESSAGE_RQBUFFER_CLEARED 0x0020
+ /* message clear rqbuffer */
+#define ACB_F_MESSAGE_WQBUFFER_READED 0x0040
+#define ACB_F_BUS_RESET 0x0080
+#define ACB_F_IOP_INITED 0x0100
+ /* iop init */
+
+ struct CommandControlBlock * pccb_pool[ARCMSR_MAX_FREECCB_NUM];
+ /* used for memory free */
+ struct list_head ccb_free_list;
+ /* head of free ccb list */
+ atomic_t ccboutstandingcount;
+
+ void * dma_coherent;
+ /* dma_coherent used for memory free */
+ dma_addr_t dma_coherent_handle;
+ /* dma_coherent_handle used for memory free */
+
+ uint8_t rqbuffer[ARCMSR_MAX_QBUFFER];
+ /* data collection buffer for read from 80331 */
+ int32_t rqbuf_firstindex;
+ /* first of read buffer */
+ int32_t rqbuf_lastindex;
+ /* last of read buffer */
+ uint8_t wqbuffer[ARCMSR_MAX_QBUFFER];
+ /* data collection buffer for write to 80331 */
+ int32_t wqbuf_firstindex;
+ /* first of write buffer */
+ int32_t wqbuf_lastindex;
+ /* last of write buffer */
+ uint8_t devstate[ARCMSR_MAX_TARGETID][ARCMSR_MAX_TARGETLUN];
+ /* id0 ..... id15, lun0...lun7 */
+#define ARECA_RAID_GONE 0x55
+#define ARECA_RAID_GOOD 0xaa
+ uint32_t num_resets;
+ uint32_t num_aborts;
+ uint32_t firm_request_len;
+ uint32_t firm_numbers_queue;
+ uint32_t firm_sdram_size;
+ uint32_t firm_hd_channels;
+ char firm_model[12];
+ char firm_version[20];
+};/* HW_DEVICE_EXTENSION */
+/*
+*******************************************************************************
+** Command Control Block
+** this CCB length must be 32 bytes boundary
+*******************************************************************************
+*/
+struct CommandControlBlock
+{
+ struct ARCMSR_CDB arcmsr_cdb;
+ /*
+ ** 0-503 (size of CDB=504):
+ ** arcmsr messenger scsi command descriptor size 504 bytes
+ */
+ uint32_t cdb_shifted_phyaddr;
+ /* 504-507 */
+ uint32_t reserved1;
+ /* 508-511 */
+#if BITS_PER_LONG == 64
+ /* ======================512+64 bytes======================== */
+ struct list_head list;
+ /* 512-527 16 bytes next/prev ptrs for ccb lists */
+ struct scsi_cmnd * pcmd;
+ /* 528-535 8 bytes pointer of linux scsi command */
+ struct AdapterControlBlock * acb;
+ /* 536-543 8 bytes pointer of acb */
+
+ uint16_t ccb_flags;
+ /* 544-545 */
+ #define CCB_FLAG_READ 0x0000
+ #define CCB_FLAG_WRITE 0x0001
+ #define CCB_FLAG_ERROR 0x0002
+ #define CCB_FLAG_FLUSHCACHE 0x0004
+ #define CCB_FLAG_MASTER_ABORTED 0x0008
+ uint16_t startdone;
+ /* 546-547 */
+ #define ARCMSR_CCB_DONE 0x0000
+ #define ARCMSR_CCB_START 0x55AA
+ #define ARCMSR_CCB_ABORTED 0xAA55
+ #define ARCMSR_CCB_ILLEGAL 0xFFFF
+ uint32_t reserved2[7];
+ /* 548-551 552-555 556-559 560-563 564-567 568-571 572-575 */
+#else
+ /* ======================512+32 bytes======================== */
+ struct list_head list;
+ /* 512-519 8 bytes next/prev ptrs for ccb lists */
+ struct scsi_cmnd * pcmd;
+ /* 520-523 4 bytes pointer of linux scsi command */
+ struct AdapterControlBlock * acb;
+ /* 524-527 4 bytes pointer of acb */
+
+ uint16_t ccb_flags;
+ /* 528-529 */
+ #define CCB_FLAG_READ 0x0000
+ #define CCB_FLAG_WRITE 0x0001
+ #define CCB_FLAG_ERROR 0x0002
+ #define CCB_FLAG_FLUSHCACHE 0x0004
+ #define CCB_FLAG_MASTER_ABORTED 0x0008
+ uint16_t startdone;
+ /* 530-531 */
+ #define ARCMSR_CCB_DONE 0x0000
+ #define ARCMSR_CCB_START 0x55AA
+ #define ARCMSR_CCB_ABORTED 0xAA55
+ #define ARCMSR_CCB_ILLEGAL 0xFFFF
+ uint32_t reserved2[3];
+ /* 532-535 536-539 540-543 */
+#endif
+ /* ========================================================== */
+};
+/*
+*******************************************************************************
+** ARECA SCSI sense data
+*******************************************************************************
+*/
+struct SENSE_DATA
+{
+ uint8_t ErrorCode:7;
+#define SCSI_SENSE_CURRENT_ERRORS 0x70
+#define SCSI_SENSE_DEFERRED_ERRORS 0x71
+ uint8_t Valid:1;
+ uint8_t SegmentNumber;
+ uint8_t SenseKey:4;
+ uint8_t Reserved:1;
+ uint8_t IncorrectLength:1;
+ uint8_t EndOfMedia:1;
+ uint8_t FileMark:1;
+ uint8_t Information[4];
+ uint8_t AdditionalSenseLength;
+ uint8_t CommandSpecificInformation[4];
+ uint8_t AdditionalSenseCode;
+ uint8_t AdditionalSenseCodeQualifier;
+ uint8_t FieldReplaceableUnitCode;
+ uint8_t SenseKeySpecific[3];
+};
+/*
+*******************************************************************************
+** Outbound Interrupt Status Register - OISR
+*******************************************************************************
+*/
+#define ARCMSR_MU_OUTBOUND_INTERRUPT_STATUS_REG 0x30
+#define ARCMSR_MU_OUTBOUND_PCI_INT 0x10
+#define ARCMSR_MU_OUTBOUND_POSTQUEUE_INT 0x08
+#define ARCMSR_MU_OUTBOUND_DOORBELL_INT 0x04
+#define ARCMSR_MU_OUTBOUND_MESSAGE1_INT 0x02
+#define ARCMSR_MU_OUTBOUND_MESSAGE0_INT 0x01
+#define ARCMSR_MU_OUTBOUND_HANDLE_INT \
+ (ARCMSR_MU_OUTBOUND_MESSAGE0_INT \
+ |ARCMSR_MU_OUTBOUND_MESSAGE1_INT \
+ |ARCMSR_MU_OUTBOUND_DOORBELL_INT \
+ |ARCMSR_MU_OUTBOUND_POSTQUEUE_INT \
+ |ARCMSR_MU_OUTBOUND_PCI_INT)
+/*
+*******************************************************************************
+** Outbound Interrupt Mask Register - OIMR
+*******************************************************************************
+*/
+#define ARCMSR_MU_OUTBOUND_INTERRUPT_MASK_REG 0x34
+#define ARCMSR_MU_OUTBOUND_PCI_INTMASKENABLE 0x10
+#define ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE 0x08
+#define ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE 0x04
+#define ARCMSR_MU_OUTBOUND_MESSAGE1_INTMASKENABLE 0x02
+#define ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE 0x01
+#define ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE 0x1F
+
+extern void arcmsr_post_Qbuffer(struct AdapterControlBlock *acb);
+extern struct class_device_attribute *arcmsr_host_attrs[];
+extern int arcmsr_alloc_sysfs_attr(struct AdapterControlBlock *acb);
+void arcmsr_free_sysfs_attr(struct AdapterControlBlock *acb);
+
diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c
new file mode 100644
index 0000000..0459f41
--- /dev/null
+++ b/drivers/scsi/arcmsr/arcmsr_attr.c
@@ -0,0 +1,392 @@
+/*
+*******************************************************************************
+** O.S : Linux
+** FILE NAME : arcmsr_attr.c
+** BY : Erich Chen
+** Description: attributes exported to sysfs and device host
+*******************************************************************************
+** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved
+**
+** Web site: www.areca.com.tw
+** E-mail: erich@areca.com.tw
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License version 2 as
+** published by the Free Software Foundation.
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+*******************************************************************************
+** Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions
+** are met:
+** 1. Redistributions of source code must retain the above copyright
+** notice, this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright
+** notice, this list of conditions and the following disclaimer in the
+** documentation and/or other materials provided with the distribution.
+** 3. The name of the author may not be used to endorse or promote products
+** derived from this software without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,BUT
+** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF
+** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************
+** For history of changes, see Documentation/scsi/ChangeLog.arcmsr
+** Firmware Specification, see Documentation/scsi/arcmsr_spec.txt
+*******************************************************************************
+*/
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include "arcmsr.h"
+
+struct class_device_attribute *arcmsr_host_attrs[];
+
+static ssize_t
+arcmsr_sysfs_iop_message_read(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct class_device *cdev = container_of(kobj,struct class_device,kobj);
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ struct MessageUnit __iomem *reg = acb->pmu;
+ uint8_t *pQbuffer,*ptmpQbuffer;
+ int32_t allxfer_len = 0;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ /* do message unit read. */
+ ptmpQbuffer = (uint8_t *)buf;
+ while ((acb->rqbuf_firstindex != acb->rqbuf_lastindex)
+ && (allxfer_len < 1031)) {
+ pQbuffer = &acb->rqbuffer[acb->rqbuf_firstindex];
+ memcpy(ptmpQbuffer, pQbuffer, 1);
+ acb->rqbuf_firstindex++;
+ acb->rqbuf_firstindex %= ARCMSR_MAX_QBUFFER;
+ ptmpQbuffer++;
+ allxfer_len++;
+ }
+ if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+ struct QBUFFER __iomem * prbuffer = (struct QBUFFER __iomem *)
+ ®->message_rbuffer;
+ uint8_t __iomem * iop_data = (uint8_t __iomem *)prbuffer->data;
+ int32_t iop_len;
+
+ acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+ iop_len = readl(&prbuffer->data_len);
+ while (iop_len > 0) {
+ acb->rqbuffer[acb->rqbuf_lastindex] = readb(iop_data);
+ acb->rqbuf_lastindex++;
+ acb->rqbuf_lastindex %= ARCMSR_MAX_QBUFFER;
+ iop_data++;
+ iop_len--;
+ }
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK,
+ ®->inbound_doorbell);
+ }
+ return (allxfer_len);
+}
+
+static ssize_t
+arcmsr_sysfs_iop_message_write(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct class_device *cdev = container_of(kobj,struct class_device,kobj);
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ int32_t my_empty_len, user_len, wqbuf_firstindex, wqbuf_lastindex;
+ uint8_t *pQbuffer, *ptmpuserbuffer;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+ if (count > 1032)
+ return -EINVAL;
+ /* do message unit write. */
+ ptmpuserbuffer = (uint8_t *)buf;
+ user_len = (int32_t)count;
+ wqbuf_lastindex = acb->wqbuf_lastindex;
+ wqbuf_firstindex = acb->wqbuf_firstindex;
+ if (wqbuf_lastindex != wqbuf_firstindex) {
+ arcmsr_post_Qbuffer(acb);
+ return 0; /*need retry*/
+ } else {
+ my_empty_len = (wqbuf_firstindex-wqbuf_lastindex - 1)
+ &(ARCMSR_MAX_QBUFFER - 1);
+ if (my_empty_len >= user_len) {
+ while (user_len > 0) {
+ pQbuffer =
+ &acb->wqbuffer[acb->wqbuf_lastindex];
+ memcpy(pQbuffer, ptmpuserbuffer, 1);
+ acb->wqbuf_lastindex++;
+ acb->wqbuf_lastindex %= ARCMSR_MAX_QBUFFER;
+ ptmpuserbuffer++;
+ user_len--;
+ }
+ if (acb->acb_flags & ACB_F_MESSAGE_WQBUFFER_CLEARED) {
+ acb->acb_flags &=
+ ~ACB_F_MESSAGE_WQBUFFER_CLEARED;
+ arcmsr_post_Qbuffer(acb);
+ }
+ return count;
+ } else {
+ return 0; /*need retry*/
+ }
+ }
+}
+
+static ssize_t
+arcmsr_sysfs_iop_message_clear(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct class_device *cdev = container_of(kobj,struct class_device,kobj);
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ struct MessageUnit __iomem *reg = acb->pmu;
+ uint8_t *pQbuffer;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+ acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK
+ , ®->inbound_doorbell);
+ }
+ acb->acb_flags |=
+ (ACB_F_MESSAGE_WQBUFFER_CLEARED
+ | ACB_F_MESSAGE_RQBUFFER_CLEARED
+ | ACB_F_MESSAGE_WQBUFFER_READED);
+ acb->rqbuf_firstindex = 0;
+ acb->rqbuf_lastindex = 0;
+ acb->wqbuf_firstindex = 0;
+ acb->wqbuf_lastindex = 0;
+ pQbuffer = acb->rqbuffer;
+ memset(pQbuffer, 0, sizeof (struct QBUFFER));
+ pQbuffer = acb->wqbuffer;
+ memset(pQbuffer, 0, sizeof (struct QBUFFER));
+ return 1;
+}
+
+static struct bin_attribute arcmsr_sysfs_message_read_attr = {
+ .attr = {
+ .name = "mu_read",
+ .mode = S_IRUSR ,
+ .owner = THIS_MODULE,
+ },
+ .size = 1032,
+ .read = arcmsr_sysfs_iop_message_read,
+};
+
+static struct bin_attribute arcmsr_sysfs_message_write_attr = {
+ .attr = {
+ .name = "mu_write",
+ .mode = S_IWUSR,
+ .owner = THIS_MODULE,
+ },
+ .size = 1032,
+ .write = arcmsr_sysfs_iop_message_write,
+};
+
+static struct bin_attribute arcmsr_sysfs_message_clear_attr = {
+ .attr = {
+ .name = "mu_clear",
+ .mode = S_IWUSR,
+ .owner = THIS_MODULE,
+ },
+ .size = 1,
+ .write = arcmsr_sysfs_iop_message_clear,
+};
+
+int arcmsr_alloc_sysfs_attr(struct AdapterControlBlock *acb)
+{
+ struct Scsi_Host *host = acb->host;
+ int error;
+
+ error = sysfs_create_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_read_attr);
+ if (error) {
+ printk(KERN_ERR "arcmsr: alloc sysfs mu_read failed\n");
+ goto error_bin_file_message_read;
+ }
+ error = sysfs_create_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_write_attr);
+ if (error) {
+ printk(KERN_ERR "arcmsr: alloc sysfs mu_write failed\n");
+ goto error_bin_file_message_write;
+ }
+ error = sysfs_create_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_clear_attr);
+ if (error) {
+ printk(KERN_ERR "arcmsr: alloc sysfs mu_clear failed\n");
+ goto error_bin_file_message_clear;
+ }
+ return 0;
+error_bin_file_message_clear:
+ error = sysfs_remove_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_write_attr);
+ if (error)
+ printk(KERN_ERR "arcmsr: sysfs_remove_bin_file mu_write failed\n");
+error_bin_file_message_write:
+ error = sysfs_remove_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_read_attr);
+ if (error)
+ printk(KERN_ERR "arcmsr: sysfs_remove_bin_file mu_read failed\n");
+error_bin_file_message_read:
+ return error;
+}
+
+void
+arcmsr_free_sysfs_attr(struct AdapterControlBlock *acb) {
+ struct Scsi_Host *host = acb->host;
+ int error;
+
+ error = sysfs_remove_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_clear_attr);
+ if (error)
+ printk(KERN_ERR "arcmsr: free sysfs mu_clear failed\n");
+ error = sysfs_remove_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_write_attr);
+ if (error)
+ printk(KERN_ERR "arcmsr: free sysfs mu_write failed\n");
+ error = sysfs_remove_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_read_attr);
+ if (error)
+ printk(KERN_ERR "arcmsr: free sysfss mu_read failed\n");
+}
+
+
+static ssize_t
+arcmsr_attr_host_driver_version(struct class_device *cdev, char *buf) {
+ return snprintf(buf, PAGE_SIZE,
+ "ARCMSR: %s\n",
+ ARCMSR_DRIVER_VERSION);
+}
+
+static ssize_t
+arcmsr_attr_host_driver_posted_cmd(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ return snprintf(buf, PAGE_SIZE,
+ "Current commands posted: %4d\n",
+ atomic_read(&acb->ccboutstandingcount));
+}
+
+static ssize_t
+arcmsr_attr_host_driver_reset(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ return snprintf(buf, PAGE_SIZE,
+ "SCSI Host Resets: %4d\n",
+ acb->num_resets);
+}
+
+static ssize_t
+arcmsr_attr_host_driver_abort(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ return snprintf(buf, PAGE_SIZE,
+ "SCSI Aborts/Timeouts: %4d\n",
+ acb->num_aborts);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_model(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ return snprintf(buf, PAGE_SIZE,
+ "Adapter Model: %s\n",
+ acb->firm_model);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_version(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+ return snprintf(buf, PAGE_SIZE,
+ "Firmware Version: %s\n",
+ acb->firm_version);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_request_len(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+ return snprintf(buf, PAGE_SIZE,
+ "Reguest Lenth: %4d\n",
+ acb->firm_request_len);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_numbers_queue(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+ return snprintf(buf, PAGE_SIZE,
+ "Numbers of Queue: %4d\n",
+ acb->firm_numbers_queue);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_sdram_size(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+ return snprintf(buf, PAGE_SIZE,
+ "SDRAM Size: %4d\n",
+ acb->firm_sdram_size);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_hd_channels(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+ return snprintf(buf, PAGE_SIZE,
+ "Hard Disk Channels: %4d\n",
+ acb->firm_hd_channels);
+}
+
+static CLASS_DEVICE_ATTR(host_driver_version, S_IRUGO, arcmsr_attr_host_driver_version, NULL);
+static CLASS_DEVICE_ATTR(host_driver_posted_cmd, S_IRUGO, arcmsr_attr_host_driver_posted_cmd, NULL);
+static CLASS_DEVICE_ATTR(host_driver_reset, S_IRUGO, arcmsr_attr_host_driver_reset, NULL);
+static CLASS_DEVICE_ATTR(host_driver_abort, S_IRUGO, arcmsr_attr_host_driver_abort, NULL);
+static CLASS_DEVICE_ATTR(host_fw_model, S_IRUGO, arcmsr_attr_host_fw_model, NULL);
+static CLASS_DEVICE_ATTR(host_fw_version, S_IRUGO, arcmsr_attr_host_fw_version, NULL);
+static CLASS_DEVICE_ATTR(host_fw_request_len, S_IRUGO, arcmsr_attr_host_fw_request_len, NULL);
+static CLASS_DEVICE_ATTR(host_fw_numbers_queue, S_IRUGO, arcmsr_attr_host_fw_numbers_queue, NULL);
+static CLASS_DEVICE_ATTR(host_fw_sdram_size, S_IRUGO, arcmsr_attr_host_fw_sdram_size, NULL);
+static CLASS_DEVICE_ATTR(host_fw_hd_channels, S_IRUGO, arcmsr_attr_host_fw_hd_channels, NULL);
+
+struct class_device_attribute *arcmsr_host_attrs[] = {
+ &class_device_attr_host_driver_version,
+ &class_device_attr_host_driver_posted_cmd,
+ &class_device_attr_host_driver_reset,
+ &class_device_attr_host_driver_abort,
+ &class_device_attr_host_fw_model,
+ &class_device_attr_host_fw_version,
+ &class_device_attr_host_fw_request_len,
+ &class_device_attr_host_fw_numbers_queue,
+ &class_device_attr_host_fw_sdram_size,
+ &class_device_attr_host_fw_hd_channels,
+ NULL,
+};
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
new file mode 100644
index 0000000..475f978
--- /dev/null
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -0,0 +1,1496 @@
+/*
+*******************************************************************************
+** O.S : Linux
+** FILE NAME : arcmsr_hba.c
+** BY : Erich Chen
+** Description: SCSI RAID Device Driver for
+** ARECA RAID Host adapter
+*******************************************************************************
+** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved
+**
+** Web site: www.areca.com.tw
+** E-mail: erich@areca.com.tw
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License version 2 as
+** published by the Free Software Foundation.
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+*******************************************************************************
+** Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions
+** are met:
+** 1. Redistributions of source code must retain the above copyright
+** notice, this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright
+** notice, this list of conditions and the following disclaimer in the
+** documentation and/or other materials provided with the distribution.
+** 3. The name of the author may not be used to endorse or promote products
+** derived from this software without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,BUT
+** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF
+** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************
+** For history of changes, see Documentation/scsi/ChangeLog.arcmsr
+** Firmware Specification, see Documentation/scsi/arcmsr_spec.txt
+*******************************************************************************
+*/
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/spinlock.h>
+#include <linux/pci_ids.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/timer.h>
+#include <linux/pci.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsicam.h>
+#include "arcmsr.h"
+
+MODULE_AUTHOR("Erich Chen <erich@areca.com.tw>");
+MODULE_DESCRIPTION("ARECA (ARC11xx/12xx) SATA RAID HOST Adapter");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION(ARCMSR_DRIVER_VERSION);
+
+static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, struct scsi_cmnd *cmd);
+static int arcmsr_abort(struct scsi_cmnd *);
+static int arcmsr_bus_reset(struct scsi_cmnd *);
+static int arcmsr_bios_param(struct scsi_device *sdev,
+ struct block_device *bdev, sector_t capacity, int *info);
+static int arcmsr_queue_command(struct scsi_cmnd * cmd,
+ void (*done) (struct scsi_cmnd *));
+static int arcmsr_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id);
+static void arcmsr_remove(struct pci_dev *pdev);
+static void arcmsr_shutdown(struct pci_dev *pdev);
+static void arcmsr_iop_init(struct AdapterControlBlock *acb);
+static void arcmsr_free_ccb_pool(struct AdapterControlBlock *acb);
+static void arcmsr_stop_adapter_bgrb(struct AdapterControlBlock *acb);
+static void arcmsr_flush_adapter_cache(struct AdapterControlBlock *acb);
+static uint8_t arcmsr_wait_msgint_ready(struct AdapterControlBlock *acb);
+static const char *arcmsr_info(struct Scsi_Host *);
+static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb);
+
+static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev, int queue_depth)
+{
+ if (queue_depth > ARCMSR_MAX_CMD_PERLUN)
+ queue_depth = ARCMSR_MAX_CMD_PERLUN;
+ scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
+ return queue_depth;
+}
+
+static struct scsi_host_template arcmsr_scsi_host_template = {
+ .module = THIS_MODULE,
+ .name = "ARCMSR ARECA SATA RAID HOST Adapter" ARCMSR_DRIVER_VERSION,
+ .info = arcmsr_info,
+ .queuecommand = arcmsr_queue_command,
+ .eh_abort_handler = arcmsr_abort,
+ .eh_bus_reset_handler = arcmsr_bus_reset,
+ .bios_param = arcmsr_bios_param,
+ .change_queue_depth = arcmsr_adjust_disk_queue_depth,
+ .can_queue = ARCMSR_MAX_OUTSTANDING_CMD,
+ .this_id = ARCMSR_SCSI_INITIATOR_ID,
+ .sg_tablesize = ARCMSR_MAX_SG_ENTRIES,
+ .max_sectors = ARCMSR_MAX_XFER_SECTORS,
+ .cmd_per_lun = ARCMSR_MAX_CMD_PERLUN,
+ .use_clustering = ENABLE_CLUSTERING,
+ .shost_attrs = arcmsr_host_attrs,
+};
+
+static struct pci_device_id arcmsr_device_id_table[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1110)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1120)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1130)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1160)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1170)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1210)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1220)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1230)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1260)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1270)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1280)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1380)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1381)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1680)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1681)},
+ {0, 0}, /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, arcmsr_device_id_table);
+static struct pci_driver arcmsr_pci_driver = {
+ .name = "arcmsr",
+ .id_table = arcmsr_device_id_table,
+ .probe = arcmsr_probe,
+ .remove = arcmsr_remove,
+ .shutdown = arcmsr_shutdown
+};
+
+static irqreturn_t arcmsr_do_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ irqreturn_t handle_state;
+ struct AdapterControlBlock *acb;
+ unsigned long flags;
+
+ acb = (struct AdapterControlBlock *)dev_id;
+
+ spin_lock_irqsave(acb->host->host_lock, flags);
+ handle_state = arcmsr_interrupt(acb);
+ spin_unlock_irqrestore(acb->host->host_lock, flags);
+ return handle_state;
+}
+
+static int arcmsr_bios_param(struct scsi_device *sdev,
+ struct block_device *bdev, sector_t capacity, int *geom)
+{
+ int ret, heads, sectors, cylinders, total_capacity;
+ unsigned char *buffer;/* return copy of block device's partition table */
+
+ buffer = scsi_bios_ptable(bdev);
+ if (buffer) {
+ ret = scsi_partsize(buffer, capacity, &geom[2], &geom[0], &geom[1]);
+ kfree(buffer);
+ if (ret != -1)
+ return ret;
+ }
+ total_capacity = capacity;
+ heads = 64;
+ sectors = 32;
+ cylinders = total_capacity / (heads * sectors);
+ if (cylinders > 1024) {
+ heads = 255;
+ sectors = 63;
+ cylinders = total_capacity / (heads * sectors);
+ }
+ geom[0] = heads;
+ geom[1] = sectors;
+ geom[2] = cylinders;
+ return 0;
+}
+
+static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
+{
+ struct pci_dev *pdev = acb->pdev;
+ struct MessageUnit __iomem *reg = acb->pmu;
+ u32 ccb_phyaddr_hi32;
+ void *dma_coherent;
+ dma_addr_t dma_coherent_handle, dma_addr;
+ struct CommandControlBlock *ccb_tmp;
+ int i, j;
+
+ dma_coherent = dma_alloc_coherent(&pdev->dev,
+ ARCMSR_MAX_FREECCB_NUM *
+ sizeof (struct CommandControlBlock) + 0x20,
+ &dma_coherent_handle, GFP_KERNEL);
+ if (!dma_coherent)
+ return -ENOMEM;
+
+ acb->dma_coherent = dma_coherent;
+ acb->dma_coherent_handle = dma_coherent_handle;
+
+ if (((unsigned long)dma_coherent & 0x1F)) {
+ dma_coherent = dma_coherent +
+ (0x20 - ((unsigned long)dma_coherent & 0x1F));
+ dma_coherent_handle = dma_coherent_handle +
+ (0x20 - ((unsigned long)dma_coherent_handle & 0x1F));
+ }
+
+ dma_addr = dma_coherent_handle;
+ ccb_tmp = (struct CommandControlBlock *)dma_coherent;
+ for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) {
+ ccb_tmp->cdb_shifted_phyaddr = dma_addr >> 5;
+ ccb_tmp->acb = acb;
+ acb->pccb_pool[i] = ccb_tmp;
+ list_add_tail(&ccb_tmp->list, &acb->ccb_free_list);
+ dma_addr = dma_addr + sizeof (struct CommandControlBlock);
+ ccb_tmp++;
+ }
+
+ acb->vir2phy_offset = (unsigned long)ccb_tmp -
+ (unsigned long)dma_addr;
+ for (i = 0; i < ARCMSR_MAX_TARGETID; i++)
+ for (j = 0; j < ARCMSR_MAX_TARGETLUN; j++)
+ acb->devstate[i][j] = ARECA_RAID_GOOD;
+
+ /*
+ ** here we need to tell iop 331 our ccb_tmp.HighPart
+ ** if ccb_tmp.HighPart is not zero
+ */
+ ccb_phyaddr_hi32 = (uint32_t) ((dma_coherent_handle >> 16) >> 16);
+ if (ccb_phyaddr_hi32 != 0) {
+ writel(ARCMSR_SIGNATURE_SET_CONFIG, ®->message_rwbuffer[0]);
+ writel(ccb_phyaddr_hi32, ®->message_rwbuffer[1]);
+ writel(ARCMSR_INBOUND_MESG0_SET_CONFIG, ®->inbound_msgaddr0);
+ if (arcmsr_wait_msgint_ready(acb))
+ printk(KERN_NOTICE "arcmsr%d: "
+ "'set ccb high part physical address' timeout\n",
+ acb->host->host_no);
+ }
+
+ writel(readl(®->outbound_intmask) |
+ ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE,
+ ®->outbound_intmask);
+ return 0;
+}
+
+static int arcmsr_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct Scsi_Host *host;
+ struct AdapterControlBlock *acb;
+ uint8_t bus, dev_fun;
+ int error;
+
+ error = pci_enable_device(pdev);
+ if (error)
+ goto out;
+ pci_set_master(pdev);
+
+ host = scsi_host_alloc(&arcmsr_scsi_host_template,
+ sizeof(struct AdapterControlBlock));
+ if (!host) {
+ error = -ENOMEM;
+ goto out_disable_device;
+ }
+ acb = (struct AdapterControlBlock *)host->hostdata;
+ memset(acb, 0, sizeof (struct AdapterControlBlock));
+
+ error = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+ if (error) {
+ error = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (error) {
+ printk(KERN_WARNING
+ "scsi%d: No suitable DMA mask available\n",
+ host->host_no);
+ goto out_host_put;
+ }
+ }
+ bus = pdev->bus->number;
+ dev_fun = pdev->devfn;
+ acb->host = host;
+ acb->pdev = pdev;
+ host->max_sectors = ARCMSR_MAX_XFER_SECTORS;
+ host->max_lun = ARCMSR_MAX_TARGETLUN;
+ host->max_id = ARCMSR_MAX_TARGETID;/*16:8*/
+ host->max_cmd_len = 16; /*this is issue of 64bit LBA, over 2T byte*/
+ host->sg_tablesize = ARCMSR_MAX_SG_ENTRIES;
+ host->can_queue = ARCMSR_MAX_FREECCB_NUM; /* max simultaneous cmds */
+ host->cmd_per_lun = ARCMSR_MAX_CMD_PERLUN;
+ host->this_id = ARCMSR_SCSI_INITIATOR_ID;
+ host->unique_id = (bus << 8) | dev_fun;
+ host->irq = pdev->irq;
+ error = pci_request_regions(pdev, "arcmsr");
+ if (error)
+ goto out_host_put;
+
+ acb->pmu = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (!acb->pmu) {
+ printk(KERN_NOTICE "arcmsr%d: memory"
+ " mapping region fail \n", acb->host->host_no);
+ goto out_release_regions;
+ }
+ acb->acb_flags |= (ACB_F_MESSAGE_WQBUFFER_CLEARED |
+ ACB_F_MESSAGE_RQBUFFER_CLEARED |
+ ACB_F_MESSAGE_WQBUFFER_READED);
+ acb->acb_flags &= ~ACB_F_SCSISTOPADAPTER;
+ INIT_LIST_HEAD(&acb->ccb_free_list);
+
+ error = arcmsr_alloc_ccb_pool(acb);
+ if (error)
+ goto out_iounmap;
+
+ error = request_irq(pdev->irq, arcmsr_do_interrupt,
+ SA_INTERRUPT | SA_SHIRQ, "arcmsr", acb);
+ if (error)
+ goto out_free_ccb_pool;
+
+ arcmsr_iop_init(acb);
+ pci_set_drvdata(pdev, host);
+
+ error = scsi_add_host(host, &pdev->dev);
+ if (error)
+ goto out_free_irq;
+
+ error = arcmsr_alloc_sysfs_attr(acb);
+ if (error)
+ goto out_free_sysfs;
+
+ scsi_scan_host(host);
+ return 0;
+ out_free_sysfs:
+ out_free_irq:
+ free_irq(pdev->irq, acb);
+ out_free_ccb_pool:
+ arcmsr_free_ccb_pool(acb);
+ out_iounmap:
+ iounmap(acb->pmu);
+ out_release_regions:
+ pci_release_regions(pdev);
+ out_host_put:
+ scsi_host_put(host);
+ out_disable_device:
+ pci_disable_device(pdev);
+ out:
+ return error;
+}
+
+static void arcmsr_abort_allcmd(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+
+ writel(ARCMSR_INBOUND_MESG0_ABORT_CMD, ®->inbound_msgaddr0);
+ if (arcmsr_wait_msgint_ready(acb))
+ printk(KERN_NOTICE
+ "arcmsr%d: wait 'abort all outstanding command' timeout \n"
+ , acb->host->host_no);
+}
+
+static void arcmsr_pci_unmap_dma(struct CommandControlBlock *ccb)
+{
+ struct AdapterControlBlock *acb = ccb->acb;
+ struct scsi_cmnd *pcmd = ccb->pcmd;
+
+ if (pcmd->use_sg != 0) {
+ struct scatterlist *sl;
+
+ sl = (struct scatterlist *)pcmd->request_buffer;
+ pci_unmap_sg(acb->pdev, sl, pcmd->use_sg, pcmd->sc_data_direction);
+ }
+ else if (pcmd->request_bufflen != 0)
+ pci_unmap_single(acb->pdev,
+ pcmd->SCp.dma_handle,
+ pcmd->request_bufflen, pcmd->sc_data_direction);
+}
+
+static void arcmsr_ccb_complete(struct CommandControlBlock *ccb, int stand_flag)
+{
+ struct AdapterControlBlock *acb = ccb->acb;
+ struct scsi_cmnd *pcmd = ccb->pcmd;
+
+ arcmsr_pci_unmap_dma(ccb);
+ if (stand_flag == 1)
+ atomic_dec(&acb->ccboutstandingcount);
+ ccb->startdone = ARCMSR_CCB_DONE;
+ ccb->ccb_flags = 0;
+ list_add_tail(&ccb->list, &acb->ccb_free_list);
+ pcmd->scsi_done(pcmd);
+}
+
+static void arcmsr_remove(struct pci_dev *pdev)
+{
+ struct Scsi_Host *host = pci_get_drvdata(pdev);
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *) host->hostdata;
+ struct MessageUnit __iomem *reg = acb->pmu;
+ int poll_count = 0;
+
+ arcmsr_free_sysfs_attr(acb);
+ scsi_remove_host(host);
+ arcmsr_stop_adapter_bgrb(acb);
+ arcmsr_flush_adapter_cache(acb);
+ writel(readl(®->outbound_intmask) |
+ ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE,
+ ®->outbound_intmask);
+ acb->acb_flags |= ACB_F_SCSISTOPADAPTER;
+ acb->acb_flags &= ~ACB_F_IOP_INITED;
+
+ for (poll_count = 0; poll_count < 256; poll_count++) {
+ if (!atomic_read(&acb->ccboutstandingcount))
+ break;
+ arcmsr_interrupt(acb);
+ msleep(25);
+ }
+
+ if (atomic_read(&acb->ccboutstandingcount)) {
+ int i;
+
+ arcmsr_abort_allcmd(acb);
+ for (i = 0; i < ARCMSR_MAX_OUTSTANDING_CMD; i++)
+ readl(®->outbound_queueport);
+ for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) {
+ struct CommandControlBlock *ccb = acb->pccb_pool[i];
+ if (ccb->startdone == ARCMSR_CCB_START) {
+ ccb->startdone = ARCMSR_CCB_ABORTED;
+ ccb->pcmd->result = DID_ABORT << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ }
+ }
+
+ free_irq(pdev->irq, acb);
+ iounmap(acb->pmu);
+ arcmsr_free_ccb_pool(acb);
+ pci_release_regions(pdev);
+
+ scsi_host_put(host);
+
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static void arcmsr_shutdown(struct pci_dev *pdev)
+{
+ struct Scsi_Host *host = pci_get_drvdata(pdev);
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *)host->hostdata;
+
+ arcmsr_stop_adapter_bgrb(acb);
+ arcmsr_flush_adapter_cache(acb);
+}
+
+static int arcmsr_module_init(void)
+{
+ int error = 0;
+
+ error = pci_register_driver(&arcmsr_pci_driver);
+ return error;
+}
+
+static void arcmsr_module_exit(void)
+{
+ pci_unregister_driver(&arcmsr_pci_driver);
+}
+module_init(arcmsr_module_init);
+module_exit(arcmsr_module_exit);
+
+static u32 arcmsr_disable_outbound_ints(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ u32 orig_mask = readl(®->outbound_intmask);
+
+ writel(orig_mask | ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE,
+ ®->outbound_intmask);
+ return orig_mask;
+}
+
+static void arcmsr_enable_outbound_ints(struct AdapterControlBlock *acb,
+ u32 orig_mask)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ u32 mask;
+
+ mask = orig_mask & ~(ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE |
+ ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE);
+ writel(mask, ®->outbound_intmask);
+}
+
+static void arcmsr_flush_adapter_cache(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg=acb->pmu;
+
+ writel(ARCMSR_INBOUND_MESG0_FLUSH_CACHE, ®->inbound_msgaddr0);
+ if (arcmsr_wait_msgint_ready(acb))
+ printk(KERN_NOTICE
+ "arcmsr%d: wait 'flush adapter cache' timeout \n"
+ , acb->host->host_no);
+}
+
+static void arcmsr_report_sense_info(struct CommandControlBlock *ccb)
+{
+ struct scsi_cmnd *pcmd = ccb->pcmd;
+ struct SENSE_DATA *sensebuffer = (struct SENSE_DATA *)pcmd->sense_buffer;
+
+ pcmd->result = DID_OK << 16;
+ if (sensebuffer) {
+ int sense_data_length =
+ sizeof (struct SENSE_DATA) < sizeof (pcmd->sense_buffer)
+ ? sizeof (struct SENSE_DATA) : sizeof (pcmd->sense_buffer);
+ memset(sensebuffer, 0, sizeof (pcmd->sense_buffer));
+ memcpy(sensebuffer, ccb->arcmsr_cdb.SenseData, sense_data_length);
+ sensebuffer->ErrorCode = SCSI_SENSE_CURRENT_ERRORS;
+ sensebuffer->Valid = 1;
+ }
+}
+
+static uint8_t arcmsr_wait_msgint_ready(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ uint32_t Index;
+ uint8_t Retries = 0x00;
+
+ do {
+ for (Index = 0; Index < 100; Index++) {
+ if (readl(®->outbound_intstatus)
+ & ARCMSR_MU_OUTBOUND_MESSAGE0_INT) {
+ writel(ARCMSR_MU_OUTBOUND_MESSAGE0_INT
+ , ®->outbound_intstatus);
+ return 0x00;
+ }
+ msleep_interruptible(10);
+ }/*max 1 seconds*/
+ } while (Retries++ < 20);/*max 20 sec*/
+ return 0xff;
+}
+
+static void arcmsr_build_ccb(struct AdapterControlBlock *acb,
+ struct CommandControlBlock *ccb, struct scsi_cmnd *pcmd)
+{
+ struct ARCMSR_CDB *arcmsr_cdb = (struct ARCMSR_CDB *)&ccb->arcmsr_cdb;
+ int8_t *psge = (int8_t *)&arcmsr_cdb->u;
+ uint32_t address_lo, address_hi;
+ int arccdbsize = 0x30;
+
+ ccb->pcmd = pcmd;
+ memset(arcmsr_cdb, 0, sizeof (struct ARCMSR_CDB));
+ arcmsr_cdb->Bus = 0;
+ arcmsr_cdb->TargetID = pcmd->device->id;
+ arcmsr_cdb->LUN = pcmd->device->lun;
+ arcmsr_cdb->Function = 1;
+ arcmsr_cdb->CdbLength = (uint8_t)pcmd->cmd_len;
+ arcmsr_cdb->Context = (unsigned long)arcmsr_cdb;
+ memcpy(arcmsr_cdb->Cdb, pcmd->cmnd, pcmd->cmd_len);
+ if (pcmd->use_sg) {
+ int length, sgcount, i, cdb_sgcount = 0;
+ struct scatterlist *sl;
+
+ /* Get Scatter Gather List from scsiport. */
+ sl = (struct scatterlist *) pcmd->request_buffer;
+ sgcount = pci_map_sg(acb->pdev, sl, pcmd->use_sg,
+ pcmd->sc_data_direction);
+ /* map stor port SG list to our iop SG List. */
+ for (i = 0; i < sgcount; i++) {
+ /* Get the physical address of the current data pointer */
+ length = cpu_to_le32(sg_dma_len(sl));
+ address_lo = cpu_to_le32(dma_addr_lo32(sg_dma_address(sl)));
+ address_hi = cpu_to_le32(dma_addr_hi32(sg_dma_address(sl)));
+ if (address_hi == 0) {
+ struct SG32ENTRY *pdma_sg = (struct SG32ENTRY *)psge;
+
+ pdma_sg->address = address_lo;
+ pdma_sg->length = length;
+ psge += sizeof (struct SG32ENTRY);
+ arccdbsize += sizeof (struct SG32ENTRY);
+ } else {
+ struct SG64ENTRY *pdma_sg = (struct SG64ENTRY *)psge;
+
+ pdma_sg->addresshigh = address_hi;
+ pdma_sg->address = address_lo;
+ pdma_sg->length = length|IS_SG64_ADDR;
+ psge += sizeof (struct SG64ENTRY);
+ arccdbsize += sizeof (struct SG64ENTRY);
+ }
+ sl++;
+ cdb_sgcount++;
+ }
+ arcmsr_cdb->sgcount = (uint8_t)cdb_sgcount;
+ arcmsr_cdb->DataLength = pcmd->request_bufflen;
+ if ( arccdbsize > 256)
+ arcmsr_cdb->Flags |= ARCMSR_CDB_FLAG_SGL_BSIZE;
+ } else if (pcmd->request_bufflen) {
+ dma_addr_t dma_addr;
+ dma_addr = pci_map_single(acb->pdev, pcmd->request_buffer,
+ pcmd->request_bufflen, pcmd->sc_data_direction);
+ pcmd->SCp.dma_handle = dma_addr;
+ address_lo = cpu_to_le32(dma_addr_lo32(dma_addr));
+ address_hi = cpu_to_le32(dma_addr_hi32(dma_addr));
+ if (address_hi == 0) {
+ struct SG32ENTRY *pdma_sg = (struct SG32ENTRY *)psge;
+ pdma_sg->address = address_lo;
+ pdma_sg->length = pcmd->request_bufflen;
+ } else {
+ struct SG64ENTRY *pdma_sg = (struct SG64ENTRY *)psge;
+ pdma_sg->addresshigh = address_hi;
+ pdma_sg->address = address_lo;
+ pdma_sg->length = pcmd->request_bufflen|IS_SG64_ADDR;
+ }
+ arcmsr_cdb->sgcount = 1;
+ arcmsr_cdb->DataLength = pcmd->request_bufflen;
+ }
+ if (pcmd->sc_data_direction == DMA_TO_DEVICE ) {
+ arcmsr_cdb->Flags |= ARCMSR_CDB_FLAG_WRITE;
+ ccb->ccb_flags |= CCB_FLAG_WRITE;
+ }
+}
+
+static void arcmsr_post_ccb(struct AdapterControlBlock *acb, struct CommandControlBlock *ccb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ uint32_t cdb_shifted_phyaddr = ccb->cdb_shifted_phyaddr;
+ struct ARCMSR_CDB *arcmsr_cdb = (struct ARCMSR_CDB *)&ccb->arcmsr_cdb;
+
+ atomic_inc(&acb->ccboutstandingcount);
+ ccb->startdone = ARCMSR_CCB_START;
+ if (arcmsr_cdb->Flags & ARCMSR_CDB_FLAG_SGL_BSIZE)
+ writel(cdb_shifted_phyaddr | ARCMSR_CCBPOST_FLAG_SGL_BSIZE,
+ ®->inbound_queueport);
+ else
+ writel(cdb_shifted_phyaddr, ®->inbound_queueport);
+}
+
+void arcmsr_post_Qbuffer(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ struct QBUFFER __iomem *pwbuffer = (struct QBUFFER __iomem *) ®->message_wbuffer;
+ uint8_t __iomem *iop_data = (uint8_t __iomem *) pwbuffer->data;
+ int32_t allxfer_len = 0;
+
+ if (acb->acb_flags & ACB_F_MESSAGE_WQBUFFER_READED) {
+ acb->acb_flags &= (~ACB_F_MESSAGE_WQBUFFER_READED);
+ while ((acb->wqbuf_firstindex != acb->wqbuf_lastindex)
+ && (allxfer_len < 124)) {
+ writeb(acb->wqbuffer[acb->wqbuf_firstindex], iop_data);
+ acb->wqbuf_firstindex++;
+ acb->wqbuf_firstindex %= ARCMSR_MAX_QBUFFER;
+ iop_data++;
+ allxfer_len++;
+ }
+ writel(allxfer_len, &pwbuffer->data_len);
+ writel(ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK
+ , ®->inbound_doorbell);
+ }
+}
+
+static void arcmsr_stop_adapter_bgrb(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+
+ acb->acb_flags &= ~ACB_F_MSG_START_BGRB;
+ writel(ARCMSR_INBOUND_MESG0_STOP_BGRB, ®->inbound_msgaddr0);
+ if (arcmsr_wait_msgint_ready(acb))
+ printk(KERN_NOTICE
+ "arcmsr%d: wait 'stop adapter background rebulid' timeout \n"
+ , acb->host->host_no);
+}
+
+static void arcmsr_free_ccb_pool(struct AdapterControlBlock *acb)
+{
+ dma_free_coherent(&acb->pdev->dev,
+ ARCMSR_MAX_FREECCB_NUM * sizeof (struct CommandControlBlock) + 0x20,
+ acb->dma_coherent,
+ acb->dma_coherent_handle);
+}
+
+static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ struct CommandControlBlock *ccb;
+ uint32_t flag_ccb, outbound_intstatus, outbound_doorbell;
+
+ outbound_intstatus = readl(®->outbound_intstatus)
+ & acb->outbound_int_enable;
+ writel(outbound_intstatus, ®->outbound_intstatus);
+ if (outbound_intstatus & ARCMSR_MU_OUTBOUND_DOORBELL_INT) {
+ outbound_doorbell = readl(®->outbound_doorbell);
+ writel(outbound_doorbell, ®->outbound_doorbell);
+ if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK) {
+ struct QBUFFER __iomem * prbuffer =
+ (struct QBUFFER __iomem *) ®->message_rbuffer;
+ uint8_t __iomem * iop_data = (uint8_t __iomem *)prbuffer->data;
+ int32_t my_empty_len, iop_len, rqbuf_firstindex, rqbuf_lastindex;
+
+ rqbuf_lastindex = acb->rqbuf_lastindex;
+ rqbuf_firstindex = acb->rqbuf_firstindex;
+ iop_len = readl(&prbuffer->data_len);
+ my_empty_len = (rqbuf_firstindex - rqbuf_lastindex - 1)
+ &(ARCMSR_MAX_QBUFFER - 1);
+ if (my_empty_len >= iop_len) {
+ while (iop_len > 0) {
+ acb->rqbuffer[acb->rqbuf_lastindex] = readb(iop_data);
+ acb->rqbuf_lastindex++;
+ acb->rqbuf_lastindex %= ARCMSR_MAX_QBUFFER;
+ iop_data++;
+ iop_len--;
+ }
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK,
+ ®->inbound_doorbell);
+ } else
+ acb->acb_flags |= ACB_F_IOPDATA_OVERFLOW;
+ }
+ if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_READ_OK) {
+ acb->acb_flags |= ACB_F_MESSAGE_WQBUFFER_READED;
+ if (acb->wqbuf_firstindex != acb->wqbuf_lastindex) {
+ struct QBUFFER __iomem * pwbuffer =
+ (struct QBUFFER __iomem *) ®->message_wbuffer;
+ uint8_t __iomem * iop_data = (uint8_t __iomem *) pwbuffer->data;
+ int32_t allxfer_len = 0;
+
+ acb->acb_flags &= (~ACB_F_MESSAGE_WQBUFFER_READED);
+ while ((acb->wqbuf_firstindex != acb->wqbuf_lastindex)
+ && (allxfer_len < 124)) {
+ writeb(acb->wqbuffer[acb->wqbuf_firstindex], iop_data);
+ acb->wqbuf_firstindex++;
+ acb->wqbuf_firstindex %= ARCMSR_MAX_QBUFFER;
+ iop_data++;
+ allxfer_len++;
+ }
+ writel(allxfer_len, &pwbuffer->data_len);
+ writel(ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK,
+ ®->inbound_doorbell);
+ }
+ if (acb->wqbuf_firstindex == acb->wqbuf_lastindex)
+ acb->acb_flags |= ACB_F_MESSAGE_WQBUFFER_CLEARED;
+ }
+ }
+ if (outbound_intstatus & ARCMSR_MU_OUTBOUND_POSTQUEUE_INT) {
+ int id, lun;
+ /*
+ ****************************************************************
+ ** areca cdb command done
+ ****************************************************************
+ */
+ while (1) {
+ if ((flag_ccb = readl(®->outbound_queueport)) == 0xFFFFFFFF)
+ break;/*chip FIFO no ccb for completion already*/
+ /* check if command done with no error*/
+ ccb = (struct CommandControlBlock *)(acb->vir2phy_offset +
+ (flag_ccb << 5));
+ if ((ccb->acb != acb) || (ccb->startdone != ARCMSR_CCB_START)) {
+ if (ccb->startdone == ARCMSR_CCB_ABORTED) {
+ struct scsi_cmnd *abortcmd=ccb->pcmd;
+ if (abortcmd) {
+ abortcmd->result |= DID_ABORT >> 16;
+ arcmsr_ccb_complete(ccb, 1);
+ printk(KERN_NOTICE
+ "arcmsr%d: ccb='0x%p' isr got aborted command \n"
+ , acb->host->host_no, ccb);
+ }
+ continue;
+ }
+ printk(KERN_NOTICE
+ "arcmsr%d: isr get an illegal ccb command done acb='0x%p'"
+ "ccb='0x%p' ccbacb='0x%p' startdone = 0x%x"
+ " ccboutstandingcount=%d \n"
+ , acb->host->host_no
+ , acb
+ , ccb
+ , ccb->acb
+ , ccb->startdone
+ , atomic_read(&acb->ccboutstandingcount));
+ continue;
+ }
+ id = ccb->pcmd->device->id;
+ lun = ccb->pcmd->device->lun;
+ if (!(flag_ccb & ARCMSR_CCBREPLY_FLAG_ERROR)) {
+ if (acb->devstate[id][lun] == ARECA_RAID_GONE)
+ acb->devstate[id][lun] = ARECA_RAID_GOOD;
+ ccb->pcmd->result = DID_OK << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ } else {
+ switch(ccb->arcmsr_cdb.DeviceStatus) {
+ case ARCMSR_DEV_SELECT_TIMEOUT: {
+ acb->devstate[id][lun] = ARECA_RAID_GONE;
+ ccb->pcmd->result = DID_TIME_OUT << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ break;
+ case ARCMSR_DEV_ABORTED:
+ case ARCMSR_DEV_INIT_FAIL: {
+ acb->devstate[id][lun] = ARECA_RAID_GONE;
+ ccb->pcmd->result = DID_BAD_TARGET << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ break;
+ case ARCMSR_DEV_CHECK_CONDITION: {
+ acb->devstate[id][lun] = ARECA_RAID_GOOD;
+ arcmsr_report_sense_info(ccb);
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ break;
+ default:
+ printk(KERN_NOTICE
+ "arcmsr%d: scsi id=%d lun=%d"
+ " isr get command error done,"
+ "but got unknown DeviceStatus = 0x%x \n"
+ , acb->host->host_no
+ , id
+ , lun
+ , ccb->arcmsr_cdb.DeviceStatus);
+ acb->devstate[id][lun] = ARECA_RAID_GONE;
+ ccb->pcmd->result = DID_NO_CONNECT << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ break;
+ }
+ }
+ }/*drain reply FIFO*/
+ }
+ if (!(outbound_intstatus & ARCMSR_MU_OUTBOUND_HANDLE_INT))
+ return IRQ_NONE;
+ return IRQ_HANDLED;
+}
+
+static void arcmsr_iop_parking(struct AdapterControlBlock *acb)
+{
+ if (acb) {
+ /* stop adapter background rebuild */
+ if (acb->acb_flags & ACB_F_MSG_START_BGRB) {
+ acb->acb_flags &= ~ACB_F_MSG_START_BGRB;
+ arcmsr_stop_adapter_bgrb(acb);
+ arcmsr_flush_adapter_cache(acb);
+ }
+ }
+}
+
+static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, struct scsi_cmnd *cmd)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ struct CMD_MESSAGE_FIELD *pcmdmessagefld;
+ int retvalue = 0, transfer_len = 0;
+ char *buffer;
+ uint32_t controlcode = (uint32_t ) cmd->cmnd[5] << 24 |
+ (uint32_t ) cmd->cmnd[6] << 16 |
+ (uint32_t ) cmd->cmnd[7] << 8 |
+ (uint32_t ) cmd->cmnd[8];
+ /* 4 bytes: Areca io control code */
+ if (cmd->use_sg) {
+ struct scatterlist *sg = (struct scatterlist *)cmd->request_buffer;
+
+ buffer = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
+ if (cmd->use_sg > 1) {
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ goto message_out;
+ }
+ transfer_len += sg->length;
+ } else {
+ buffer = cmd->request_buffer;
+ transfer_len = cmd->request_bufflen;
+ }
+ if (transfer_len > sizeof(struct CMD_MESSAGE_FIELD)) {
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ goto message_out;
+ }
+ pcmdmessagefld = (struct CMD_MESSAGE_FIELD *) buffer;
+ switch(controlcode) {
+ case ARCMSR_MESSAGE_READ_RQBUFFER: {
+ unsigned long *ver_addr;
+ dma_addr_t buf_handle;
+ uint8_t *pQbuffer, *ptmpQbuffer;
+ int32_t allxfer_len = 0;
+
+ ver_addr = pci_alloc_consistent(acb->pdev, 1032, &buf_handle);
+ if (!ver_addr) {
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ goto message_out;
+ }
+ ptmpQbuffer = (uint8_t *) ver_addr;
+ while ((acb->rqbuf_firstindex != acb->rqbuf_lastindex)
+ && (allxfer_len < 1031)) {
+ pQbuffer = &acb->rqbuffer[acb->rqbuf_firstindex];
+ memcpy(ptmpQbuffer, pQbuffer, 1);
+ acb->rqbuf_firstindex++;
+ acb->rqbuf_firstindex %= ARCMSR_MAX_QBUFFER;
+ ptmpQbuffer++;
+ allxfer_len++;
+ }
+ if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+ struct QBUFFER __iomem * prbuffer = (struct QBUFFER __iomem *)
+ ®->message_rbuffer;
+ uint8_t __iomem * iop_data = (uint8_t __iomem *)prbuffer->data;
+ int32_t iop_len;
+
+ acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+ iop_len = readl(&prbuffer->data_len);
+ while (iop_len > 0) {
+ acb->rqbuffer[acb->rqbuf_lastindex] = readb(iop_data);
+ acb->rqbuf_lastindex++;
+ acb->rqbuf_lastindex %= ARCMSR_MAX_QBUFFER;
+ iop_data++;
+ iop_len--;
+ }
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK,
+ ®->inbound_doorbell);
+ }
+ memcpy(pcmdmessagefld->messagedatabuffer,
+ (uint8_t *)ver_addr, allxfer_len);
+ pcmdmessagefld->cmdmessage.Length = allxfer_len;
+ pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_OK;
+ pci_free_consistent(acb->pdev, 1032, ver_addr, buf_handle);
+ }
+ break;
+ case ARCMSR_MESSAGE_WRITE_WQBUFFER: {
+ unsigned long *ver_addr;
+ dma_addr_t buf_handle;
+ int32_t my_empty_len, user_len, wqbuf_firstindex, wqbuf_lastindex;
+ uint8_t *pQbuffer, *ptmpuserbuffer;
+
+ ver_addr = pci_alloc_consistent(acb->pdev, 1032, &buf_handle);
+ if (!ver_addr) {
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ goto message_out;
+ }
+ ptmpuserbuffer = (uint8_t *)ver_addr;
+ user_len = pcmdmessagefld->cmdmessage.Length;
+ memcpy(ptmpuserbuffer, pcmdmessagefld->messagedatabuffer, user_len);
+ wqbuf_lastindex = acb->wqbuf_lastindex;
+ wqbuf_firstindex = acb->wqbuf_firstindex;
+ if (wqbuf_lastindex != wqbuf_firstindex) {
+ struct SENSE_DATA *sensebuffer =
+ (struct SENSE_DATA *)cmd->sense_buffer;
+ arcmsr_post_Qbuffer(acb);
+ /* has error report sensedata */
+ sensebuffer->ErrorCode = 0x70;
+ sensebuffer->SenseKey = ILLEGAL_REQUEST;
+ sensebuffer->AdditionalSenseLength = 0x0A;
+ sensebuffer->AdditionalSenseCode = 0x20;
+ sensebuffer->Valid = 1;
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ } else {
+ my_empty_len = (wqbuf_firstindex-wqbuf_lastindex - 1)
+ &(ARCMSR_MAX_QBUFFER - 1);
+ if (my_empty_len >= user_len) {
+ while (user_len > 0) {
+ pQbuffer =
+ &acb->wqbuffer[acb->wqbuf_lastindex];
+ memcpy(pQbuffer, ptmpuserbuffer, 1);
+ acb->wqbuf_lastindex++;
+ acb->wqbuf_lastindex %= ARCMSR_MAX_QBUFFER;
+ ptmpuserbuffer++;
+ user_len--;
+ }
+ if (acb->acb_flags & ACB_F_MESSAGE_WQBUFFER_CLEARED) {
+ acb->acb_flags &=
+ ~ACB_F_MESSAGE_WQBUFFER_CLEARED;
+ arcmsr_post_Qbuffer(acb);
+ }
+ } else {
+ /* has error report sensedata */
+ struct SENSE_DATA *sensebuffer =
+ (struct SENSE_DATA *)cmd->sense_buffer;
+ sensebuffer->ErrorCode = 0x70;
+ sensebuffer->SenseKey = ILLEGAL_REQUEST;
+ sensebuffer->AdditionalSenseLength = 0x0A;
+ sensebuffer->AdditionalSenseCode = 0x20;
+ sensebuffer->Valid = 1;
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ }
+ }
+ pci_free_consistent(acb->pdev, 1032, ver_addr, buf_handle);
+ }
+ break;
+ case ARCMSR_MESSAGE_CLEAR_RQBUFFER: {
+ uint8_t *pQbuffer = acb->rqbuffer;
+
+ if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+ acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK,
+ ®->inbound_doorbell);
+ }
+ acb->acb_flags |= ACB_F_MESSAGE_RQBUFFER_CLEARED;
+ acb->rqbuf_firstindex = 0;
+ acb->rqbuf_lastindex = 0;
+ memset(pQbuffer, 0, ARCMSR_MAX_QBUFFER);
+ pcmdmessagefld->cmdmessage.ReturnCode =
+ ARCMSR_MESSAGE_RETURNCODE_OK;
+ }
+ break;
+ case ARCMSR_MESSAGE_CLEAR_WQBUFFER: {
+ uint8_t *pQbuffer = acb->wqbuffer;
+
+ if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+ acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK
+ , ®->inbound_doorbell);
+ }
+ acb->acb_flags |=
+ (ACB_F_MESSAGE_WQBUFFER_CLEARED |
+ ACB_F_MESSAGE_WQBUFFER_READED);
+ acb->wqbuf_firstindex = 0;
+ acb->wqbuf_lastindex = 0;
+ memset(pQbuffer, 0, ARCMSR_MAX_QBUFFER);
+ pcmdmessagefld->cmdmessage.ReturnCode =
+ ARCMSR_MESSAGE_RETURNCODE_OK;
+ }
+ break;
+ case ARCMSR_MESSAGE_CLEAR_ALLQBUFFER: {
+ uint8_t *pQbuffer;
+
+ if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+ acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK
+ , ®->inbound_doorbell);
+ }
+ acb->acb_flags |=
+ (ACB_F_MESSAGE_WQBUFFER_CLEARED
+ | ACB_F_MESSAGE_RQBUFFER_CLEARED
+ | ACB_F_MESSAGE_WQBUFFER_READED);
+ acb->rqbuf_firstindex = 0;
+ acb->rqbuf_lastindex = 0;
+ acb->wqbuf_firstindex = 0;
+ acb->wqbuf_lastindex = 0;
+ pQbuffer = acb->rqbuffer;
+ memset(pQbuffer, 0, sizeof (struct QBUFFER));
+ pQbuffer = acb->wqbuffer;
+ memset(pQbuffer, 0, sizeof (struct QBUFFER));
+ pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_OK;
+ }
+ break;
+ case ARCMSR_MESSAGE_RETURN_CODE_3F: {
+ pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_3F;
+ }
+ break;
+ case ARCMSR_MESSAGE_SAY_HELLO: {
+ int8_t * hello_string = "Hello! I am ARCMSR";
+
+ memcpy(pcmdmessagefld->messagedatabuffer, hello_string
+ , (int16_t)strlen(hello_string));
+ pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_OK;
+ }
+ break;
+ case ARCMSR_MESSAGE_SAY_GOODBYE:
+ arcmsr_iop_parking(acb);
+ break;
+ case ARCMSR_MESSAGE_FLUSH_ADAPTER_CACHE:
+ arcmsr_flush_adapter_cache(acb);
+ break;
+ default:
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ }
+ message_out:
+ if (cmd->use_sg) {
+ struct scatterlist *sg;
+
+ sg = (struct scatterlist *) cmd->request_buffer;
+ kunmap_atomic(buffer - sg->offset, KM_IRQ0);
+ }
+ return retvalue;
+}
+
+static struct CommandControlBlock *arcmsr_get_freeccb(struct AdapterControlBlock *acb)
+{
+ struct list_head *head = &acb->ccb_free_list;
+ struct CommandControlBlock *ccb = NULL;
+
+ if (!list_empty(head)) {
+ ccb = list_entry(head->next, struct CommandControlBlock, list);
+ list_del(head->next);
+ }
+ return ccb;
+}
+
+static void arcmsr_handle_virtual_command(struct AdapterControlBlock *acb,
+ struct scsi_cmnd *cmd)
+{
+ switch (cmd->cmnd[0]) {
+ case INQUIRY: {
+ unsigned char inqdata[36];
+ char *buffer;
+
+ if (cmd->device->lun) {
+ cmd->result = (DID_TIME_OUT << 16);
+ cmd->scsi_done(cmd);
+ return;
+ }
+ inqdata[0] = TYPE_PROCESSOR;
+ /* Periph Qualifier & Periph Dev Type */
+ inqdata[1] = 0;
+ /* rem media bit & Dev Type Modifier */
+ inqdata[2] = 0;
+ /* ISO,ECMA,& ANSI versions */
+ inqdata[4] = 31;
+ /* length of additional data */
+ strncpy(&inqdata[8], "Areca ", 8);
+ /* Vendor Identification */
+ strncpy(&inqdata[16], "RAID controller ", 16);
+ /* Product Identification */
+ strncpy(&inqdata[32], "R001", 4); /* Product Revision */
+ if (cmd->use_sg) {
+ struct scatterlist *sg;
+
+ sg = (struct scatterlist *) cmd->request_buffer;
+ buffer = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
+ } else {
+ buffer = cmd->request_buffer;
+ }
+ memcpy(buffer, inqdata, sizeof(inqdata));
+ if (cmd->use_sg) {
+ struct scatterlist *sg;
+
+ sg = (struct scatterlist *) cmd->request_buffer;
+ kunmap_atomic(buffer - sg->offset, KM_IRQ0);
+ }
+ cmd->scsi_done(cmd);
+ }
+ break;
+ case WRITE_BUFFER:
+ case READ_BUFFER: {
+ if (arcmsr_iop_message_xfer(acb, cmd))
+ cmd->result = (DID_ERROR << 16);
+ cmd->scsi_done(cmd);
+ }
+ break;
+ default:
+ cmd->scsi_done(cmd);
+ }
+}
+
+static int arcmsr_queue_command(struct scsi_cmnd *cmd,
+ void (* done)(struct scsi_cmnd *))
+{
+ struct Scsi_Host *host = cmd->device->host;
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *) host->hostdata;
+ struct CommandControlBlock *ccb;
+ int target = cmd->device->id;
+ int lun = cmd->device->lun;
+
+ cmd->scsi_done = done;
+ cmd->host_scribble = NULL;
+ cmd->result = 0;
+ if (acb->acb_flags & ACB_F_BUS_RESET) {
+ printk(KERN_NOTICE "arcmsr%d: bus reset"
+ " and return busy \n"
+ , acb->host->host_no);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+ if(target == 16) {
+ /* virtual device for iop message transfer */
+ arcmsr_handle_virtual_command(acb, cmd);
+ return 0;
+ }
+ if (acb->devstate[target][lun] == ARECA_RAID_GONE) {
+ uint8_t block_cmd;
+
+ block_cmd = cmd->cmnd[0] & 0x0f;
+ if (block_cmd == 0x08 || block_cmd == 0x0a) {
+ printk(KERN_NOTICE
+ "arcmsr%d: block 'read/write'"
+ "command with gone raid volume"
+ " Cmd=%2x, TargetId=%d, Lun=%d \n"
+ , acb->host->host_no
+ , cmd->cmnd[0]
+ , target, lun);
+ cmd->result = (DID_NO_CONNECT << 16);
+ cmd->scsi_done(cmd);
+ return 0;
+ }
+ }
+ if (atomic_read(&acb->ccboutstandingcount) >=
+ ARCMSR_MAX_OUTSTANDING_CMD)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ ccb = arcmsr_get_freeccb(acb);
+ if (!ccb)
+ return SCSI_MLQUEUE_HOST_BUSY;
+ arcmsr_build_ccb(acb, ccb, cmd);
+ arcmsr_post_ccb(acb, ccb);
+ return 0;
+}
+
+static void arcmsr_get_firmware_spec(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ char *acb_firm_model = acb->firm_model;
+ char *acb_firm_version = acb->firm_version;
+ char __iomem *iop_firm_model = (char __iomem *) ®->message_rwbuffer[15];
+ char __iomem *iop_firm_version = (char __iomem *) ®->message_rwbuffer[17];
+ int count;
+
+ writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0);
+ if (arcmsr_wait_msgint_ready(acb))
+ printk(KERN_NOTICE
+ "arcmsr%d: wait "
+ "'get adapter firmware miscellaneous data' timeout \n"
+ , acb->host->host_no);
+ count = 8;
+ while (count) {
+ *acb_firm_model = readb(iop_firm_model);
+ acb_firm_model++;
+ iop_firm_model++;
+ count--;
+ }
+ count = 16;
+ while (count) {
+ *acb_firm_version = readb(iop_firm_version);
+ acb_firm_version++;
+ iop_firm_version++;
+ count--;
+ }
+ printk(KERN_INFO
+ "ARECA RAID ADAPTER%d: FIRMWARE VERSION %s \n"
+ , acb->host->host_no
+ , acb->firm_version);
+ acb->firm_request_len = readl(®->message_rwbuffer[1]);
+ acb->firm_numbers_queue = readl(®->message_rwbuffer[2]);
+ acb->firm_sdram_size = readl(®->message_rwbuffer[3]);
+ acb->firm_hd_channels = readl(®->message_rwbuffer[4]);
+}
+
+static void arcmsr_polling_ccbdone(struct AdapterControlBlock *acb,
+ struct CommandControlBlock *poll_ccb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ struct CommandControlBlock *ccb;
+ uint32_t flag_ccb, outbound_intstatus, poll_ccb_done = 0, poll_count = 0;
+ int id, lun;
+
+ polling_ccb_retry:
+ poll_count++;
+ outbound_intstatus = readl(®->outbound_intstatus)
+ & acb->outbound_int_enable;
+ writel(outbound_intstatus, ®->outbound_intstatus);/*clear interrupt*/
+ while (1) {
+ if ((flag_ccb = readl(®->outbound_queueport)) == 0xFFFFFFFF) {
+ if (poll_ccb_done)
+ break;
+ else {
+ msleep(25);
+ if (poll_count > 100)
+ break;
+ goto polling_ccb_retry;
+ }
+ }
+ ccb = (struct CommandControlBlock *)
+ (acb->vir2phy_offset + (flag_ccb << 5));
+ if ((ccb->acb != acb) ||
+ (ccb->startdone != ARCMSR_CCB_START)) {
+ if ((ccb->startdone == ARCMSR_CCB_ABORTED) ||
+ (ccb == poll_ccb)) {
+ printk(KERN_NOTICE
+ "arcmsr%d: scsi id=%d lun=%d ccb='0x%p'"
+ " poll command abort successfully \n"
+ , acb->host->host_no
+ , ccb->pcmd->device->id
+ , ccb->pcmd->device->lun
+ , ccb);
+ ccb->pcmd->result = DID_ABORT << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ poll_ccb_done = 1;
+ continue;
+ }
+ printk(KERN_NOTICE
+ "arcmsr%d: polling get an illegal ccb"
+ " command done ccb='0x%p'"
+ "ccboutstandingcount=%d \n"
+ , acb->host->host_no
+ , ccb
+ , atomic_read(&acb->ccboutstandingcount));
+ continue;
+ }
+ id = ccb->pcmd->device->id;
+ lun = ccb->pcmd->device->lun;
+ if (!(flag_ccb & ARCMSR_CCBREPLY_FLAG_ERROR)) {
+ if (acb->devstate[id][lun] == ARECA_RAID_GONE)
+ acb->devstate[id][lun] = ARECA_RAID_GOOD;
+ ccb->pcmd->result = DID_OK << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ } else {
+ switch(ccb->arcmsr_cdb.DeviceStatus) {
+ case ARCMSR_DEV_SELECT_TIMEOUT: {
+ acb->devstate[id][lun] = ARECA_RAID_GONE;
+ ccb->pcmd->result = DID_TIME_OUT << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ break;
+ case ARCMSR_DEV_ABORTED:
+ case ARCMSR_DEV_INIT_FAIL: {
+ acb->devstate[id][lun] = ARECA_RAID_GONE;
+ ccb->pcmd->result = DID_BAD_TARGET << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ break;
+ case ARCMSR_DEV_CHECK_CONDITION: {
+ acb->devstate[id][lun] = ARECA_RAID_GOOD;
+ arcmsr_report_sense_info(ccb);
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ break;
+ default:
+ printk(KERN_NOTICE
+ "arcmsr%d: scsi id=%d lun=%d"
+ " polling and getting command error done"
+ "but got unknown DeviceStatus = 0x%x \n"
+ , acb->host->host_no
+ , id
+ , lun
+ , ccb->arcmsr_cdb.DeviceStatus);
+ acb->devstate[id][lun] = ARECA_RAID_GONE;
+ ccb->pcmd->result = DID_BAD_TARGET << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ break;
+ }
+ }
+ }
+}
+
+static void arcmsr_iop_init(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ uint32_t intmask_org, mask, outbound_doorbell, firmware_state = 0;
+
+ do {
+ firmware_state = readl(®->outbound_msgaddr1);
+ } while (!(firmware_state & ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK));
+ intmask_org = readl(®->outbound_intmask)
+ | ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE;
+ arcmsr_get_firmware_spec(acb);
+
+ acb->acb_flags |= ACB_F_MSG_START_BGRB;
+ writel(ARCMSR_INBOUND_MESG0_START_BGRB, ®->inbound_msgaddr0);
+ if (arcmsr_wait_msgint_ready(acb)) {
+ printk(KERN_NOTICE "arcmsr%d: "
+ "wait 'start adapter background rebulid' timeout\n",
+ acb->host->host_no);
+ }
+
+ outbound_doorbell = readl(®->outbound_doorbell);
+ writel(outbound_doorbell, ®->outbound_doorbell);
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK, ®->inbound_doorbell);
+ mask = ~(ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE
+ | ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE);
+ writel(intmask_org & mask, ®->outbound_intmask);
+ acb->outbound_int_enable = ~(intmask_org & mask) & 0x000000ff;
+ acb->acb_flags |= ACB_F_IOP_INITED;
+}
+
+static void arcmsr_iop_reset(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ struct CommandControlBlock *ccb;
+ uint32_t intmask_org;
+ int i = 0;
+
+ if (atomic_read(&acb->ccboutstandingcount) != 0) {
+ /* talk to iop 331 outstanding command aborted */
+ arcmsr_abort_allcmd(acb);
+ /* wait for 3 sec for all command aborted*/
+ msleep_interruptible(3000);
+ /* disable all outbound interrupt */
+ intmask_org = arcmsr_disable_outbound_ints(acb);
+ /* clear all outbound posted Q */
+ for (i = 0; i < ARCMSR_MAX_OUTSTANDING_CMD; i++)
+ readl(®->outbound_queueport);
+ for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) {
+ ccb = acb->pccb_pool[i];
+ if ((ccb->startdone == ARCMSR_CCB_START) ||
+ (ccb->startdone == ARCMSR_CCB_ABORTED)) {
+ ccb->startdone = ARCMSR_CCB_ABORTED;
+ ccb->pcmd->result = DID_ABORT << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ }
+ /* enable all outbound interrupt */
+ arcmsr_enable_outbound_ints(acb, intmask_org);
+ }
+ atomic_set(&acb->ccboutstandingcount, 0);
+}
+
+static int arcmsr_bus_reset(struct scsi_cmnd *cmd)
+{
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *)cmd->device->host->hostdata;
+ int i;
+
+ acb->num_resets++;
+ acb->acb_flags |= ACB_F_BUS_RESET;
+ for (i = 0; i < 400; i++) {
+ if (!atomic_read(&acb->ccboutstandingcount))
+ break;
+ arcmsr_interrupt(acb);
+ msleep(25);
+ }
+ arcmsr_iop_reset(acb);
+ acb->acb_flags &= ~ACB_F_BUS_RESET;
+ return SUCCESS;
+}
+
+static void arcmsr_abort_one_cmd(struct AdapterControlBlock *acb,
+ struct CommandControlBlock *ccb)
+{
+ u32 intmask;
+
+ ccb->startdone = ARCMSR_CCB_ABORTED;
+
+ /*
+ ** Wait for 3 sec for all command done.
+ */
+ msleep_interruptible(3000);
+
+ intmask = arcmsr_disable_outbound_ints(acb);
+ arcmsr_polling_ccbdone(acb, ccb);
+ arcmsr_enable_outbound_ints(acb, intmask);
+}
+
+static int arcmsr_abort(struct scsi_cmnd *cmd)
+{
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *)cmd->device->host->hostdata;
+ int i = 0;
+
+ printk(KERN_NOTICE
+ "arcmsr%d: abort device command of scsi id=%d lun=%d \n",
+ acb->host->host_no, cmd->device->id, cmd->device->lun);
+ acb->num_aborts++;
+
+ /*
+ ************************************************
+ ** the all interrupt service routine is locked
+ ** we need to handle it as soon as possible and exit
+ ************************************************
+ */
+ if (!atomic_read(&acb->ccboutstandingcount))
+ return SUCCESS;
+
+ for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) {
+ struct CommandControlBlock *ccb = acb->pccb_pool[i];
+ if (ccb->startdone == ARCMSR_CCB_START && ccb->pcmd == cmd) {
+ arcmsr_abort_one_cmd(acb, ccb);
+ break;
+ }
+ }
+
+ return SUCCESS;
+}
+
+static const char *arcmsr_info(struct Scsi_Host *host)
+{
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *) host->hostdata;
+ static char buf[256];
+ char *type;
+ int raid6 = 1;
+
+ switch (acb->pdev->device) {
+ case PCI_DEVICE_ID_ARECA_1110:
+ case PCI_DEVICE_ID_ARECA_1210:
+ raid6 = 0;
+ /*FALLTHRU*/
+ case PCI_DEVICE_ID_ARECA_1120:
+ case PCI_DEVICE_ID_ARECA_1130:
+ case PCI_DEVICE_ID_ARECA_1160:
+ case PCI_DEVICE_ID_ARECA_1170:
+ case PCI_DEVICE_ID_ARECA_1220:
+ case PCI_DEVICE_ID_ARECA_1230:
+ case PCI_DEVICE_ID_ARECA_1260:
+ case PCI_DEVICE_ID_ARECA_1270:
+ case PCI_DEVICE_ID_ARECA_1280:
+ type = "SATA";
+ break;
+ case PCI_DEVICE_ID_ARECA_1380:
+ case PCI_DEVICE_ID_ARECA_1381:
+ case PCI_DEVICE_ID_ARECA_1680:
+ case PCI_DEVICE_ID_ARECA_1681:
+ type = "SAS";
+ break;
+ default:
+ type = "X-TYPE";
+ break;
+ }
+ sprintf(buf, "Areca %s Host Adapter RAID Controller%s\n %s",
+ type, raid6 ? "( RAID6 capable)" : "",
+ ARCMSR_DRIVER_VERSION);
+ return buf;
+}
+
+
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c09396d..df7b6267 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2004,6 +2004,23 @@
#define PCI_DEVICE_ID_ALTIMA_AC9100 0x03ea
#define PCI_DEVICE_ID_ALTIMA_AC1003 0x03eb
+#define PCI_VENDOR_ID_ARECA 0x17d3
+#define PCI_DEVICE_ID_ARECA_1110 0x1110
+#define PCI_DEVICE_ID_ARECA_1120 0x1120
+#define PCI_DEVICE_ID_ARECA_1130 0x1130
+#define PCI_DEVICE_ID_ARECA_1160 0x1160
+#define PCI_DEVICE_ID_ARECA_1170 0x1170
+#define PCI_DEVICE_ID_ARECA_1210 0x1210
+#define PCI_DEVICE_ID_ARECA_1220 0x1220
+#define PCI_DEVICE_ID_ARECA_1230 0x1230
+#define PCI_DEVICE_ID_ARECA_1260 0x1260
+#define PCI_DEVICE_ID_ARECA_1270 0x1270
+#define PCI_DEVICE_ID_ARECA_1280 0x1280
+#define PCI_DEVICE_ID_ARECA_1380 0x1380
+#define PCI_DEVICE_ID_ARECA_1381 0x1381
+#define PCI_DEVICE_ID_ARECA_1680 0x1680
+#define PCI_DEVICE_ID_ARECA_1681 0x1681
+
#define PCI_VENDOR_ID_S2IO 0x17d5
#define PCI_DEVICE_ID_S2IO_WIN 0x5731
#define PCI_DEVICE_ID_S2IO_UNI 0x5831