| /* |
| * Copyright 2012 Linaro Ltd |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| soc-u9500 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "stericsson,db8500"; |
| interrupt-parent = <&intc>; |
| ranges; |
| |
| intc: interrupt-controller@a0411000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <1>; |
| interrupt-controller; |
| reg = <0xa0411000 0x1000>, |
| <0xa0410100 0x100>; |
| }; |
| |
| L2: l2-cache { |
| compatible = "arm,pl310-cache"; |
| reg = <0xa0412000 0x1000>; |
| interrupts = <0 13 4>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupts = <0 7 0x4>; |
| }; |
| |
| timer@a0410600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| reg = <0xa0410600 0x20>; |
| interrupts = <1 13 0x304>; |
| }; |
| |
| rtc@80154000 { |
| compatible = "arm,rtc-pl031", "arm,primecell"; |
| reg = <0x80154000 0x1000>; |
| interrupts = <0 18 0x4>; |
| }; |
| |
| gpio0: gpio@8012e000 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8012e000 0x80>; |
| interrupts = <0 119 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <0>; |
| }; |
| |
| gpio1: gpio@8012e080 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8012e080 0x80>; |
| interrupts = <0 120 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <1>; |
| }; |
| |
| gpio2: gpio@8000e000 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8000e000 0x80>; |
| interrupts = <0 121 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <2>; |
| }; |
| |
| gpio3: gpio@8000e080 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8000e080 0x80>; |
| interrupts = <0 122 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <3>; |
| }; |
| |
| gpio4: gpio@8000e100 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8000e100 0x80>; |
| interrupts = <0 123 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <4>; |
| }; |
| |
| gpio5: gpio@8000e180 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8000e180 0x80>; |
| interrupts = <0 124 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <5>; |
| }; |
| |
| gpio6: gpio@8011e000 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8011e000 0x80>; |
| interrupts = <0 125 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <6>; |
| }; |
| |
| gpio7: gpio@8011e080 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8011e080 0x80>; |
| interrupts = <0 126 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <7>; |
| }; |
| |
| gpio8: gpio@a03fe000 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0xa03fe000 0x80>; |
| interrupts = <0 127 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <8>; |
| }; |
| |
| pinctrl { |
| compatible = "stericsson,nmk-pinctrl"; |
| prcm = <&prcmu>; |
| }; |
| |
| usb@a03e0000 { |
| compatible = "stericsson,db8500-musb", |
| "mentor,musb"; |
| reg = <0xa03e0000 0x10000>; |
| interrupts = <0 23 0x4>; |
| }; |
| |
| dma-controller@801C0000 { |
| compatible = "stericsson,db8500-dma40", |
| "stericsson,dma40"; |
| reg = <0x801C0000 0x1000 0x40010000 0x800>; |
| interrupts = <0 25 0x4>; |
| }; |
| |
| prcmu: prcmu@80157000 { |
| compatible = "stericsson,db8500-prcmu"; |
| reg = <0x80157000 0x1000>; |
| reg-names = "prcmu"; |
| interrupts = <0 47 0x4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ranges; |
| |
| prcmu-timer-4@80157450 { |
| compatible = "stericsson,db8500-prcmu-timer-4"; |
| reg = <0x80157450 0xC>; |
| }; |
| |
| thermal@801573c0 { |
| compatible = "stericsson,db8500-thermal"; |
| reg = <0x801573c0 0x40>; |
| interrupts = <21 0x4>, <22 0x4>; |
| interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; |
| status = "disabled"; |
| }; |
| |
| db8500-prcmu-regulators { |
| compatible = "stericsson,db8500-prcmu-regulator"; |
| |
| // DB8500_REGULATOR_VAPE |
| db8500_vape_reg: db8500_vape { |
| regulator-compatible = "db8500_vape"; |
| regulator-always-on; |
| }; |
| |
| // DB8500_REGULATOR_VARM |
| db8500_varm_reg: db8500_varm { |
| regulator-compatible = "db8500_varm"; |
| }; |
| |
| // DB8500_REGULATOR_VMODEM |
| db8500_vmodem_reg: db8500_vmodem { |
| regulator-compatible = "db8500_vmodem"; |
| }; |
| |
| // DB8500_REGULATOR_VPLL |
| db8500_vpll_reg: db8500_vpll { |
| regulator-compatible = "db8500_vpll"; |
| }; |
| |
| // DB8500_REGULATOR_VSMPS1 |
| db8500_vsmps1_reg: db8500_vsmps1 { |
| regulator-compatible = "db8500_vsmps1"; |
| }; |
| |
| // DB8500_REGULATOR_VSMPS2 |
| db8500_vsmps2_reg: db8500_vsmps2 { |
| regulator-compatible = "db8500_vsmps2"; |
| }; |
| |
| // DB8500_REGULATOR_VSMPS3 |
| db8500_vsmps3_reg: db8500_vsmps3 { |
| regulator-compatible = "db8500_vsmps3"; |
| }; |
| |
| // DB8500_REGULATOR_VRF1 |
| db8500_vrf1_reg: db8500_vrf1 { |
| regulator-compatible = "db8500_vrf1"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SVAMMDSP |
| db8500_sva_mmdsp_reg: db8500_sva_mmdsp { |
| regulator-compatible = "db8500_sva_mmdsp"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SVAMMDSPRET |
| db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { |
| regulator-compatible = "db8500_sva_mmdsp_ret"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SVAPIPE |
| db8500_sva_pipe_reg: db8500_sva_pipe { |
| regulator-compatible = "db8500_sva_pipe"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SIAMMDSP |
| db8500_sia_mmdsp_reg: db8500_sia_mmdsp { |
| regulator-compatible = "db8500_sia_mmdsp"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SIAMMDSPRET |
| db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SIAPIPE |
| db8500_sia_pipe_reg: db8500_sia_pipe { |
| regulator-compatible = "db8500_sia_pipe"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SGA |
| db8500_sga_reg: db8500_sga { |
| regulator-compatible = "db8500_sga"; |
| vin-supply = <&db8500_vape_reg>; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_B2R2_MCDE |
| db8500_b2r2_mcde_reg: db8500_b2r2_mcde { |
| regulator-compatible = "db8500_b2r2_mcde"; |
| vin-supply = <&db8500_vape_reg>; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_ESRAM12 |
| db8500_esram12_reg: db8500_esram12 { |
| regulator-compatible = "db8500_esram12"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_ESRAM12RET |
| db8500_esram12_ret_reg: db8500_esram12_ret { |
| regulator-compatible = "db8500_esram12_ret"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_ESRAM34 |
| db8500_esram34_reg: db8500_esram34 { |
| regulator-compatible = "db8500_esram34"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_ESRAM34RET |
| db8500_esram34_ret_reg: db8500_esram34_ret { |
| regulator-compatible = "db8500_esram34_ret"; |
| }; |
| }; |
| |
| ab8500 { |
| compatible = "stericsson,ab8500"; |
| interrupt-parent = <&intc>; |
| interrupts = <0 40 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| ab8500-rtc { |
| compatible = "stericsson,ab8500-rtc"; |
| interrupts = <17 0x4 |
| 18 0x4>; |
| interrupt-names = "60S", "ALARM"; |
| }; |
| |
| ab8500-gpadc { |
| compatible = "stericsson,ab8500-gpadc"; |
| interrupts = <32 0x4 |
| 39 0x4>; |
| interrupt-names = "HW_CONV_END", "SW_CONV_END"; |
| vddadc-supply = <&ab8500_ldo_tvout_reg>; |
| }; |
| |
| ab8500_battery: ab8500_battery { |
| stericsson,battery-type = "LIPO"; |
| thermistor-on-batctrl; |
| }; |
| |
| ab8500_fg { |
| compatible = "stericsson,ab8500-fg"; |
| battery = <&ab8500_battery>; |
| }; |
| |
| ab8500_btemp { |
| compatible = "stericsson,ab8500-btemp"; |
| battery = <&ab8500_battery>; |
| }; |
| |
| ab8500_charger { |
| compatible = "stericsson,ab8500-charger"; |
| battery = <&ab8500_battery>; |
| vddadc-supply = <&ab8500_ldo_tvout_reg>; |
| }; |
| |
| ab8500_chargalg { |
| compatible = "stericsson,ab8500-chargalg"; |
| battery = <&ab8500_battery>; |
| }; |
| |
| ab8500_usb { |
| compatible = "stericsson,ab8500-usb"; |
| interrupts = < 90 0x4 |
| 96 0x4 |
| 14 0x4 |
| 15 0x4 |
| 79 0x4 |
| 74 0x4 |
| 75 0x4>; |
| interrupt-names = "ID_WAKEUP_R", |
| "ID_WAKEUP_F", |
| "VBUS_DET_F", |
| "VBUS_DET_R", |
| "USB_LINK_STATUS", |
| "USB_ADP_PROBE_PLUG", |
| "USB_ADP_PROBE_UNPLUG"; |
| vddulpivio18-supply = <&ab8500_ldo_initcore_reg>; |
| v-ape-supply = <&db8500_vape_reg>; |
| musb_1v8-supply = <&db8500_vsmps2_reg>; |
| }; |
| |
| ab8500-ponkey { |
| compatible = "stericsson,ab8500-poweron-key"; |
| interrupts = <6 0x4 |
| 7 0x4>; |
| interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; |
| }; |
| |
| ab8500-sysctrl { |
| compatible = "stericsson,ab8500-sysctrl"; |
| }; |
| |
| ab8500-pwm { |
| compatible = "stericsson,ab8500-pwm"; |
| }; |
| |
| ab8500-debugfs { |
| compatible = "stericsson,ab8500-debug"; |
| }; |
| |
| codec: ab8500-codec { |
| compatible = "stericsson,ab8500-codec"; |
| |
| stericsson,earpeice-cmv = <950>; /* Units in mV. */ |
| }; |
| |
| ab8500-regulators { |
| compatible = "stericsson,ab8500-regulator"; |
| |
| // supplies to the display/camera |
| ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { |
| regulator-compatible = "ab8500_ldo_aux1"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2900000>; |
| regulator-boot-on; |
| /* BUG: If turned off MMC will be affected. */ |
| regulator-always-on; |
| }; |
| |
| // supplies to the on-board eMMC |
| ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { |
| regulator-compatible = "ab8500_ldo_aux2"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| // supply for VAUX3; SDcard slots |
| ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { |
| regulator-compatible = "ab8500_ldo_aux3"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| // supply for v-intcore12; VINTCORE12 LDO |
| ab8500_ldo_initcore_reg: ab8500_ldo_initcore { |
| regulator-compatible = "ab8500_ldo_initcore"; |
| }; |
| |
| // supply for tvout; gpadc; TVOUT LDO |
| ab8500_ldo_tvout_reg: ab8500_ldo_tvout { |
| regulator-compatible = "ab8500_ldo_tvout"; |
| }; |
| |
| // supply for ab8500-usb; USB LDO |
| ab8500_ldo_usb_reg: ab8500_ldo_usb { |
| regulator-compatible = "ab8500_ldo_usb"; |
| }; |
| |
| // supply for ab8500-vaudio; VAUDIO LDO |
| ab8500_ldo_audio_reg: ab8500_ldo_audio { |
| regulator-compatible = "ab8500_ldo_audio"; |
| }; |
| |
| // supply for v-anamic1 VAMic1-LDO |
| ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { |
| regulator-compatible = "ab8500_ldo_anamic1"; |
| }; |
| |
| // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 |
| ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { |
| regulator-compatible = "ab8500_ldo_amamic2"; |
| }; |
| |
| // supply for v-dmic; VDMIC LDO |
| ab8500_ldo_dmic_reg: ab8500_ldo_dmic { |
| regulator-compatible = "ab8500_ldo_dmic"; |
| }; |
| |
| // supply for U8500 CSI/DSI; VANA LDO |
| ab8500_ldo_ana_reg: ab8500_ldo_ana { |
| regulator-compatible = "ab8500_ldo_ana"; |
| }; |
| }; |
| }; |
| }; |
| |
| i2c@80004000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; |
| reg = <0x80004000 0x1000>; |
| interrupts = <0 21 0x4>; |
| arm,primecell-periphid = <0x180024>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| v-i2c-supply = <&db8500_vape_reg>; |
| |
| clock-frequency = <400000>; |
| }; |
| |
| i2c@80122000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; |
| reg = <0x80122000 0x1000>; |
| interrupts = <0 22 0x4>; |
| arm,primecell-periphid = <0x180024>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| v-i2c-supply = <&db8500_vape_reg>; |
| |
| clock-frequency = <400000>; |
| }; |
| |
| i2c@80128000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; |
| reg = <0x80128000 0x1000>; |
| interrupts = <0 55 0x4>; |
| arm,primecell-periphid = <0x180024>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| v-i2c-supply = <&db8500_vape_reg>; |
| |
| clock-frequency = <400000>; |
| }; |
| |
| i2c@80110000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; |
| reg = <0x80110000 0x1000>; |
| interrupts = <0 12 0x4>; |
| arm,primecell-periphid = <0x180024>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| v-i2c-supply = <&db8500_vape_reg>; |
| |
| clock-frequency = <400000>; |
| }; |
| |
| i2c@8012a000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; |
| reg = <0x8012a000 0x1000>; |
| interrupts = <0 51 0x4>; |
| arm,primecell-periphid = <0x180024>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| v-i2c-supply = <&db8500_vape_reg>; |
| |
| clock-frequency = <400000>; |
| }; |
| |
| ssp@80002000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x80002000 0x1000>; |
| interrupts = <0 14 0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| // Add one of these for each child device |
| cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4 |
| &gpio6 22 0x4 &gpio7 0 0x4>; |
| |
| }; |
| |
| uart@80120000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x80120000 0x1000>; |
| interrupts = <0 11 0x4>; |
| status = "disabled"; |
| }; |
| uart@80121000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x80121000 0x1000>; |
| interrupts = <0 19 0x4>; |
| status = "disabled"; |
| }; |
| uart@80007000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x80007000 0x1000>; |
| interrupts = <0 26 0x4>; |
| status = "disabled"; |
| }; |
| |
| sdi0_per1@80126000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80126000 0x1000>; |
| interrupts = <0 60 0x4>; |
| status = "disabled"; |
| }; |
| |
| sdi1_per2@80118000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80118000 0x1000>; |
| interrupts = <0 50 0x4>; |
| status = "disabled"; |
| }; |
| |
| sdi2_per3@80005000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80005000 0x1000>; |
| interrupts = <0 41 0x4>; |
| status = "disabled"; |
| }; |
| |
| sdi3_per2@80119000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80119000 0x1000>; |
| interrupts = <0 59 0x4>; |
| status = "disabled"; |
| }; |
| |
| sdi4_per2@80114000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80114000 0x1000>; |
| interrupts = <0 99 0x4>; |
| status = "disabled"; |
| }; |
| |
| sdi5_per3@80008000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80008000 0x1000>; |
| interrupts = <0 100 0x4>; |
| status = "disabled"; |
| }; |
| |
| msp0: msp@80123000 { |
| compatible = "stericsson,ux500-msp-i2s"; |
| reg = <0x80123000 0x1000>; |
| interrupts = <0 31 0x4>; |
| v-ape-supply = <&db8500_vape_reg>; |
| status = "disabled"; |
| }; |
| |
| msp1: msp@80124000 { |
| compatible = "stericsson,ux500-msp-i2s"; |
| reg = <0x80124000 0x1000>; |
| interrupts = <0 62 0x4>; |
| v-ape-supply = <&db8500_vape_reg>; |
| status = "disabled"; |
| }; |
| |
| // HDMI sound |
| msp2: msp@80117000 { |
| compatible = "stericsson,ux500-msp-i2s"; |
| reg = <0x80117000 0x1000>; |
| interrupts = <0 98 0x4>; |
| v-ape-supply = <&db8500_vape_reg>; |
| status = "disabled"; |
| }; |
| |
| msp3: msp@80125000 { |
| compatible = "stericsson,ux500-msp-i2s"; |
| reg = <0x80125000 0x1000>; |
| interrupts = <0 62 0x4>; |
| v-ape-supply = <&db8500_vape_reg>; |
| status = "disabled"; |
| }; |
| |
| external-bus@50000000 { |
| compatible = "simple-bus"; |
| reg = <0x50000000 0x4000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x50000000 0x4000000>; |
| status = "disabled"; |
| }; |
| |
| cpufreq-cooling { |
| compatible = "stericsson,db8500-cpufreq-cooling"; |
| status = "disabled"; |
| }; |
| |
| vmmci: regulator-gpio { |
| compatible = "regulator-gpio"; |
| |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2600000>; |
| regulator-name = "mmci-reg"; |
| regulator-type = "voltage"; |
| |
| states = <1800000 0x1 |
| 2900000 0x0>; |
| |
| status = "disabled"; |
| }; |
| }; |
| }; |