ARM: AM33XX: hwmod: Update and uncomment AES0 module data

Update the AES0 HIB2 module's hwmod data for the am33xx SoC.
Also, remove it from the '#if 0' block that its currently
inside so the data is actually available for use.

CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
[paul@pwsan.com: fixed lines causing sparse warnings]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index a0e2925..556a122 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -417,7 +417,6 @@
  *    - clkdiv32k
  *    - debugss
  *    - ocp watch point
- *    - aes0
  */
 #if 0
 /*
@@ -498,25 +497,41 @@
 		},
 	},
 };
+#endif
 
 /*
- * 'aes' class
+ * 'aes0' class
  */
-static struct omap_hwmod_class am33xx_aes_hwmod_class = {
-	.name		= "aes",
+static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = {
+	.rev_offs	= 0x80,
+	.sysc_offs	= 0x84,
+	.syss_offs	= 0x88,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class am33xx_aes0_hwmod_class = {
+	.name		= "aes0",
+	.sysc		= &am33xx_aes0_sysc,
 };
 
 static struct omap_hwmod_irq_info am33xx_aes0_irqs[] = {
-	{ .irq = 102 + OMAP_INTC_START, },
+	{ .irq = 103 + OMAP_INTC_START, },
 	{ .irq = -1 },
 };
 
+static struct omap_hwmod_dma_info am33xx_aes0_edma_reqs[] = {
+	{ .name = "tx", .dma_req = 6, },
+	{ .name = "rx", .dma_req = 5, },
+	{ .dma_req = -1 }
+};
+
 static struct omap_hwmod am33xx_aes0_hwmod = {
-	.name		= "aes0",
-	.class		= &am33xx_aes_hwmod_class,
+	.name		= "aes",
+	.class		= &am33xx_aes0_hwmod_class,
 	.clkdm_name	= "l3_clkdm",
 	.mpu_irqs	= am33xx_aes0_irqs,
-	.main_clk	= "l3_gclk",
+	.sdma_reqs	= am33xx_aes0_edma_reqs,
+	.main_clk	= "aes0_fck",
 	.prcm		= {
 		.omap4	= {
 			.clkctrl_offs	= AM33XX_CM_PER_AES0_CLKCTRL_OFFSET,
@@ -524,7 +539,6 @@
 		},
 	},
 };
-#endif
 
 /* sha0 HIB2 (the 'P' (public) device) */
 static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = {
@@ -3464,6 +3478,24 @@
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l3 main -> AES0 HIB2 */
+static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = {
+	{
+		.pa_start	= 0x53500000,
+		.pa_end		= 0x53500000 + SZ_1M - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_aes0_hwmod,
+	.clk		= "aes0_fck",
+	.addr		= am33xx_aes0_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l4_fw__emif_fw,
 	&am33xx_l3_main__emif,
@@ -3545,6 +3577,7 @@
 	&am33xx_l4_hs__cpgmac0,
 	&am33xx_cpgmac0__mdio,
 	&am33xx_l3_main__sha0,
+	&am33xx_l3_main__aes0,
 	NULL,
 };