| /* |
| * Copyright © 2012-2014 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eugeni Dodonov <eugeni.dodonov@intel.com> |
| * Daniel Vetter <daniel.vetter@ffwll.ch> |
| * |
| */ |
| |
| #include <linux/pm_runtime.h> |
| #include <linux/vgaarb.h> |
| |
| #include "i915_drv.h" |
| #include "intel_drv.h" |
| |
| /** |
| * DOC: runtime pm |
| * |
| * The i915 driver supports dynamic enabling and disabling of entire hardware |
| * blocks at runtime. This is especially important on the display side where |
| * software is supposed to control many power gates manually on recent hardware, |
| * since on the GT side a lot of the power management is done by the hardware. |
| * But even there some manual control at the device level is required. |
| * |
| * Since i915 supports a diverse set of platforms with a unified codebase and |
| * hardware engineers just love to shuffle functionality around between power |
| * domains there's a sizeable amount of indirection required. This file provides |
| * generic functions to the driver for grabbing and releasing references for |
| * abstract power domains. It then maps those to the actual power wells |
| * present for a given platform. |
| */ |
| |
| #define for_each_power_well(i, power_well, domain_mask, power_domains) \ |
| for (i = 0; \ |
| i < (power_domains)->power_well_count && \ |
| ((power_well) = &(power_domains)->power_wells[i]); \ |
| i++) \ |
| for_each_if ((power_well)->domains & (domain_mask)) |
| |
| #define for_each_power_well_rev(i, power_well, domain_mask, power_domains) \ |
| for (i = (power_domains)->power_well_count - 1; \ |
| i >= 0 && ((power_well) = &(power_domains)->power_wells[i]);\ |
| i--) \ |
| for_each_if ((power_well)->domains & (domain_mask)) |
| |
| bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv, |
| int power_well_id); |
| |
| const char * |
| intel_display_power_domain_str(enum intel_display_power_domain domain) |
| { |
| switch (domain) { |
| case POWER_DOMAIN_PIPE_A: |
| return "PIPE_A"; |
| case POWER_DOMAIN_PIPE_B: |
| return "PIPE_B"; |
| case POWER_DOMAIN_PIPE_C: |
| return "PIPE_C"; |
| case POWER_DOMAIN_PIPE_A_PANEL_FITTER: |
| return "PIPE_A_PANEL_FITTER"; |
| case POWER_DOMAIN_PIPE_B_PANEL_FITTER: |
| return "PIPE_B_PANEL_FITTER"; |
| case POWER_DOMAIN_PIPE_C_PANEL_FITTER: |
| return "PIPE_C_PANEL_FITTER"; |
| case POWER_DOMAIN_TRANSCODER_A: |
| return "TRANSCODER_A"; |
| case POWER_DOMAIN_TRANSCODER_B: |
| return "TRANSCODER_B"; |
| case POWER_DOMAIN_TRANSCODER_C: |
| return "TRANSCODER_C"; |
| case POWER_DOMAIN_TRANSCODER_EDP: |
| return "TRANSCODER_EDP"; |
| case POWER_DOMAIN_TRANSCODER_DSI_A: |
| return "TRANSCODER_DSI_A"; |
| case POWER_DOMAIN_TRANSCODER_DSI_C: |
| return "TRANSCODER_DSI_C"; |
| case POWER_DOMAIN_PORT_DDI_A_LANES: |
| return "PORT_DDI_A_LANES"; |
| case POWER_DOMAIN_PORT_DDI_B_LANES: |
| return "PORT_DDI_B_LANES"; |
| case POWER_DOMAIN_PORT_DDI_C_LANES: |
| return "PORT_DDI_C_LANES"; |
| case POWER_DOMAIN_PORT_DDI_D_LANES: |
| return "PORT_DDI_D_LANES"; |
| case POWER_DOMAIN_PORT_DDI_E_LANES: |
| return "PORT_DDI_E_LANES"; |
| case POWER_DOMAIN_PORT_DSI: |
| return "PORT_DSI"; |
| case POWER_DOMAIN_PORT_CRT: |
| return "PORT_CRT"; |
| case POWER_DOMAIN_PORT_OTHER: |
| return "PORT_OTHER"; |
| case POWER_DOMAIN_VGA: |
| return "VGA"; |
| case POWER_DOMAIN_AUDIO: |
| return "AUDIO"; |
| case POWER_DOMAIN_PLLS: |
| return "PLLS"; |
| case POWER_DOMAIN_AUX_A: |
| return "AUX_A"; |
| case POWER_DOMAIN_AUX_B: |
| return "AUX_B"; |
| case POWER_DOMAIN_AUX_C: |
| return "AUX_C"; |
| case POWER_DOMAIN_AUX_D: |
| return "AUX_D"; |
| case POWER_DOMAIN_GMBUS: |
| return "GMBUS"; |
| case POWER_DOMAIN_INIT: |
| return "INIT"; |
| case POWER_DOMAIN_MODESET: |
| return "MODESET"; |
| default: |
| MISSING_CASE(domain); |
| return "?"; |
| } |
| } |
| |
| static void intel_power_well_enable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| DRM_DEBUG_KMS("enabling %s\n", power_well->name); |
| power_well->ops->enable(dev_priv, power_well); |
| power_well->hw_enabled = true; |
| } |
| |
| static void intel_power_well_disable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| DRM_DEBUG_KMS("disabling %s\n", power_well->name); |
| power_well->hw_enabled = false; |
| power_well->ops->disable(dev_priv, power_well); |
| } |
| |
| /* |
| * We should only use the power well if we explicitly asked the hardware to |
| * enable it, so check if it's enabled and also check if we've requested it to |
| * be enabled. |
| */ |
| static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| return I915_READ(HSW_PWR_WELL_DRIVER) == |
| (HSW_PWR_WELL_ENABLE_REQUEST | HSW_PWR_WELL_STATE_ENABLED); |
| } |
| |
| /** |
| * __intel_display_power_is_enabled - unlocked check for a power domain |
| * @dev_priv: i915 device instance |
| * @domain: power domain to check |
| * |
| * This is the unlocked version of intel_display_power_is_enabled() and should |
| * only be used from error capture and recovery code where deadlocks are |
| * possible. |
| * |
| * Returns: |
| * True when the power domain is enabled, false otherwise. |
| */ |
| bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_domains *power_domains; |
| struct i915_power_well *power_well; |
| bool is_enabled; |
| int i; |
| |
| if (dev_priv->pm.suspended) |
| return false; |
| |
| power_domains = &dev_priv->power_domains; |
| |
| is_enabled = true; |
| |
| for_each_power_well_rev(i, power_well, BIT(domain), power_domains) { |
| if (power_well->always_on) |
| continue; |
| |
| if (!power_well->hw_enabled) { |
| is_enabled = false; |
| break; |
| } |
| } |
| |
| return is_enabled; |
| } |
| |
| /** |
| * intel_display_power_is_enabled - check for a power domain |
| * @dev_priv: i915 device instance |
| * @domain: power domain to check |
| * |
| * This function can be used to check the hw power domain state. It is mostly |
| * used in hardware state readout functions. Everywhere else code should rely |
| * upon explicit power domain reference counting to ensure that the hardware |
| * block is powered up before accessing it. |
| * |
| * Callers must hold the relevant modesetting locks to ensure that concurrent |
| * threads can't disable the power well while the caller tries to read a few |
| * registers. |
| * |
| * Returns: |
| * True when the power domain is enabled, false otherwise. |
| */ |
| bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_domains *power_domains; |
| bool ret; |
| |
| power_domains = &dev_priv->power_domains; |
| |
| mutex_lock(&power_domains->lock); |
| ret = __intel_display_power_is_enabled(dev_priv, domain); |
| mutex_unlock(&power_domains->lock); |
| |
| return ret; |
| } |
| |
| /** |
| * intel_display_set_init_power - set the initial power domain state |
| * @dev_priv: i915 device instance |
| * @enable: whether to enable or disable the initial power domain state |
| * |
| * For simplicity our driver load/unload and system suspend/resume code assumes |
| * that all power domains are always enabled. This functions controls the state |
| * of this little hack. While the initial power domain state is enabled runtime |
| * pm is effectively disabled. |
| */ |
| void intel_display_set_init_power(struct drm_i915_private *dev_priv, |
| bool enable) |
| { |
| if (dev_priv->power_domains.init_power_on == enable) |
| return; |
| |
| if (enable) |
| intel_display_power_get(dev_priv, POWER_DOMAIN_INIT); |
| else |
| intel_display_power_put(dev_priv, POWER_DOMAIN_INIT); |
| |
| dev_priv->power_domains.init_power_on = enable; |
| } |
| |
| /* |
| * Starting with Haswell, we have a "Power Down Well" that can be turned off |
| * when not needed anymore. We have 4 registers that can request the power well |
| * to be enabled, and it will only be disabled if none of the registers is |
| * requesting it to be enabled. |
| */ |
| static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| |
| /* |
| * After we re-enable the power well, if we touch VGA register 0x3d5 |
| * we'll get unclaimed register interrupts. This stops after we write |
| * anything to the VGA MSR register. The vgacon module uses this |
| * register all the time, so if we unbind our driver and, as a |
| * consequence, bind vgacon, we'll get stuck in an infinite loop at |
| * console_unlock(). So make here we touch the VGA MSR register, making |
| * sure vgacon can keep working normally without triggering interrupts |
| * and error messages. |
| */ |
| vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); |
| outb(inb(VGA_MSR_READ), VGA_MSR_WRITE); |
| vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); |
| |
| if (IS_BROADWELL(dev)) |
| gen8_irq_power_well_post_enable(dev_priv, |
| 1 << PIPE_C | 1 << PIPE_B); |
| } |
| |
| static void hsw_power_well_pre_disable(struct drm_i915_private *dev_priv) |
| { |
| if (IS_BROADWELL(dev_priv)) |
| gen8_irq_power_well_pre_disable(dev_priv, |
| 1 << PIPE_C | 1 << PIPE_B); |
| } |
| |
| static void skl_power_well_post_enable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| |
| /* |
| * After we re-enable the power well, if we touch VGA register 0x3d5 |
| * we'll get unclaimed register interrupts. This stops after we write |
| * anything to the VGA MSR register. The vgacon module uses this |
| * register all the time, so if we unbind our driver and, as a |
| * consequence, bind vgacon, we'll get stuck in an infinite loop at |
| * console_unlock(). So make here we touch the VGA MSR register, making |
| * sure vgacon can keep working normally without triggering interrupts |
| * and error messages. |
| */ |
| if (power_well->data == SKL_DISP_PW_2) { |
| vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); |
| outb(inb(VGA_MSR_READ), VGA_MSR_WRITE); |
| vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); |
| |
| gen8_irq_power_well_post_enable(dev_priv, |
| 1 << PIPE_C | 1 << PIPE_B); |
| } |
| } |
| |
| static void skl_power_well_pre_disable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| if (power_well->data == SKL_DISP_PW_2) |
| gen8_irq_power_well_pre_disable(dev_priv, |
| 1 << PIPE_C | 1 << PIPE_B); |
| } |
| |
| static void hsw_set_power_well(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well, bool enable) |
| { |
| bool is_enabled, enable_requested; |
| uint32_t tmp; |
| |
| tmp = I915_READ(HSW_PWR_WELL_DRIVER); |
| is_enabled = tmp & HSW_PWR_WELL_STATE_ENABLED; |
| enable_requested = tmp & HSW_PWR_WELL_ENABLE_REQUEST; |
| |
| if (enable) { |
| if (!enable_requested) |
| I915_WRITE(HSW_PWR_WELL_DRIVER, |
| HSW_PWR_WELL_ENABLE_REQUEST); |
| |
| if (!is_enabled) { |
| DRM_DEBUG_KMS("Enabling power well\n"); |
| if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) & |
| HSW_PWR_WELL_STATE_ENABLED), 20)) |
| DRM_ERROR("Timeout enabling power well\n"); |
| hsw_power_well_post_enable(dev_priv); |
| } |
| |
| } else { |
| if (enable_requested) { |
| hsw_power_well_pre_disable(dev_priv); |
| I915_WRITE(HSW_PWR_WELL_DRIVER, 0); |
| POSTING_READ(HSW_PWR_WELL_DRIVER); |
| DRM_DEBUG_KMS("Requesting to disable the power well\n"); |
| } |
| } |
| } |
| |
| #define SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_TRANSCODER_A) | \ |
| BIT(POWER_DOMAIN_PIPE_B) | \ |
| BIT(POWER_DOMAIN_TRANSCODER_B) | \ |
| BIT(POWER_DOMAIN_PIPE_C) | \ |
| BIT(POWER_DOMAIN_TRANSCODER_C) | \ |
| BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \ |
| BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_E_LANES) | \ |
| BIT(POWER_DOMAIN_AUX_B) | \ |
| BIT(POWER_DOMAIN_AUX_C) | \ |
| BIT(POWER_DOMAIN_AUX_D) | \ |
| BIT(POWER_DOMAIN_AUDIO) | \ |
| BIT(POWER_DOMAIN_VGA) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| #define SKL_DISPLAY_DDI_A_E_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_E_LANES) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| #define SKL_DISPLAY_DDI_B_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| #define SKL_DISPLAY_DDI_C_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| #define SKL_DISPLAY_DDI_D_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| #define SKL_DISPLAY_DC_OFF_POWER_DOMAINS ( \ |
| SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \ |
| BIT(POWER_DOMAIN_MODESET) | \ |
| BIT(POWER_DOMAIN_AUX_A) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| #define SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS ( \ |
| (POWER_DOMAIN_MASK & ~( \ |
| SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \ |
| SKL_DISPLAY_DC_OFF_POWER_DOMAINS)) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| |
| #define BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_TRANSCODER_A) | \ |
| BIT(POWER_DOMAIN_PIPE_B) | \ |
| BIT(POWER_DOMAIN_TRANSCODER_B) | \ |
| BIT(POWER_DOMAIN_PIPE_C) | \ |
| BIT(POWER_DOMAIN_TRANSCODER_C) | \ |
| BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \ |
| BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ |
| BIT(POWER_DOMAIN_AUX_B) | \ |
| BIT(POWER_DOMAIN_AUX_C) | \ |
| BIT(POWER_DOMAIN_AUDIO) | \ |
| BIT(POWER_DOMAIN_VGA) | \ |
| BIT(POWER_DOMAIN_GMBUS) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| #define BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS ( \ |
| BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \ |
| BIT(POWER_DOMAIN_PIPE_A) | \ |
| BIT(POWER_DOMAIN_TRANSCODER_EDP) | \ |
| BIT(POWER_DOMAIN_TRANSCODER_DSI_A) | \ |
| BIT(POWER_DOMAIN_TRANSCODER_DSI_C) | \ |
| BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \ |
| BIT(POWER_DOMAIN_PORT_DSI) | \ |
| BIT(POWER_DOMAIN_AUX_A) | \ |
| BIT(POWER_DOMAIN_PLLS) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| #define BXT_DISPLAY_DC_OFF_POWER_DOMAINS ( \ |
| BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \ |
| BIT(POWER_DOMAIN_MODESET) | \ |
| BIT(POWER_DOMAIN_AUX_A) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| #define BXT_DISPLAY_ALWAYS_ON_POWER_DOMAINS ( \ |
| (POWER_DOMAIN_MASK & ~(BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS | \ |
| BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS)) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| |
| static void assert_can_enable_dc9(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| |
| WARN(!IS_BROXTON(dev), "Platform doesn't support DC9.\n"); |
| WARN((I915_READ(DC_STATE_EN) & DC_STATE_EN_DC9), |
| "DC9 already programmed to be enabled.\n"); |
| WARN(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5, |
| "DC5 still not disabled to enable DC9.\n"); |
| WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on.\n"); |
| WARN(intel_irqs_enabled(dev_priv), "Interrupts not disabled yet.\n"); |
| |
| /* |
| * TODO: check for the following to verify the conditions to enter DC9 |
| * state are satisfied: |
| * 1] Check relevant display engine registers to verify if mode set |
| * disable sequence was followed. |
| * 2] Check if display uninitialize sequence is initialized. |
| */ |
| } |
| |
| static void assert_can_disable_dc9(struct drm_i915_private *dev_priv) |
| { |
| WARN(intel_irqs_enabled(dev_priv), "Interrupts not disabled yet.\n"); |
| WARN(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5, |
| "DC5 still not disabled.\n"); |
| |
| /* |
| * TODO: check for the following to verify DC9 state was indeed |
| * entered before programming to disable it: |
| * 1] Check relevant display engine registers to verify if mode |
| * set disable sequence was followed. |
| * 2] Check if display uninitialize sequence is initialized. |
| */ |
| } |
| |
| static void gen9_write_dc_state(struct drm_i915_private *dev_priv, |
| u32 state) |
| { |
| int rewrites = 0; |
| int rereads = 0; |
| u32 v; |
| |
| I915_WRITE(DC_STATE_EN, state); |
| |
| /* It has been observed that disabling the dc6 state sometimes |
| * doesn't stick and dmc keeps returning old value. Make sure |
| * the write really sticks enough times and also force rewrite until |
| * we are confident that state is exactly what we want. |
| */ |
| do { |
| v = I915_READ(DC_STATE_EN); |
| |
| if (v != state) { |
| I915_WRITE(DC_STATE_EN, state); |
| rewrites++; |
| rereads = 0; |
| } else if (rereads++ > 5) { |
| break; |
| } |
| |
| } while (rewrites < 100); |
| |
| if (v != state) |
| DRM_ERROR("Writing dc state to 0x%x failed, now 0x%x\n", |
| state, v); |
| |
| /* Most of the times we need one retry, avoid spam */ |
| if (rewrites > 1) |
| DRM_DEBUG_KMS("Rewrote dc state to 0x%x %d times\n", |
| state, rewrites); |
| } |
| |
| static void gen9_set_dc_state(struct drm_i915_private *dev_priv, uint32_t state) |
| { |
| uint32_t val; |
| uint32_t mask; |
| |
| mask = DC_STATE_EN_UPTO_DC5; |
| if (IS_BROXTON(dev_priv)) |
| mask |= DC_STATE_EN_DC9; |
| else |
| mask |= DC_STATE_EN_UPTO_DC6; |
| |
| if (WARN_ON_ONCE(state & ~dev_priv->csr.allowed_dc_mask)) |
| state &= dev_priv->csr.allowed_dc_mask; |
| |
| val = I915_READ(DC_STATE_EN); |
| DRM_DEBUG_KMS("Setting DC state from %02x to %02x\n", |
| val & mask, state); |
| |
| /* Check if DMC is ignoring our DC state requests */ |
| if ((val & mask) != dev_priv->csr.dc_state) |
| DRM_ERROR("DC state mismatch (0x%x -> 0x%x)\n", |
| dev_priv->csr.dc_state, val & mask); |
| |
| val &= ~mask; |
| val |= state; |
| |
| gen9_write_dc_state(dev_priv, val); |
| |
| dev_priv->csr.dc_state = val & mask; |
| } |
| |
| void bxt_enable_dc9(struct drm_i915_private *dev_priv) |
| { |
| assert_can_enable_dc9(dev_priv); |
| |
| DRM_DEBUG_KMS("Enabling DC9\n"); |
| |
| gen9_set_dc_state(dev_priv, DC_STATE_EN_DC9); |
| } |
| |
| void bxt_disable_dc9(struct drm_i915_private *dev_priv) |
| { |
| assert_can_disable_dc9(dev_priv); |
| |
| DRM_DEBUG_KMS("Disabling DC9\n"); |
| |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); |
| } |
| |
| static void assert_csr_loaded(struct drm_i915_private *dev_priv) |
| { |
| WARN_ONCE(!I915_READ(CSR_PROGRAM(0)), |
| "CSR program storage start is NULL\n"); |
| WARN_ONCE(!I915_READ(CSR_SSP_BASE), "CSR SSP Base Not fine\n"); |
| WARN_ONCE(!I915_READ(CSR_HTP_SKL), "CSR HTP Not fine\n"); |
| } |
| |
| static void assert_can_enable_dc5(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| bool pg2_enabled = intel_display_power_well_is_enabled(dev_priv, |
| SKL_DISP_PW_2); |
| |
| WARN_ONCE(!IS_SKYLAKE(dev) && !IS_KABYLAKE(dev), |
| "Platform doesn't support DC5.\n"); |
| WARN_ONCE(!HAS_RUNTIME_PM(dev), "Runtime PM not enabled.\n"); |
| WARN_ONCE(pg2_enabled, "PG2 not disabled to enable DC5.\n"); |
| |
| WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5), |
| "DC5 already programmed to be enabled.\n"); |
| assert_rpm_wakelock_held(dev_priv); |
| |
| assert_csr_loaded(dev_priv); |
| } |
| |
| static void gen9_enable_dc5(struct drm_i915_private *dev_priv) |
| { |
| assert_can_enable_dc5(dev_priv); |
| |
| DRM_DEBUG_KMS("Enabling DC5\n"); |
| |
| gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5); |
| } |
| |
| static void assert_can_enable_dc6(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| |
| WARN_ONCE(!IS_SKYLAKE(dev) && !IS_KABYLAKE(dev), |
| "Platform doesn't support DC6.\n"); |
| WARN_ONCE(!HAS_RUNTIME_PM(dev), "Runtime PM not enabled.\n"); |
| WARN_ONCE(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE, |
| "Backlight is not disabled.\n"); |
| WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6), |
| "DC6 already programmed to be enabled.\n"); |
| |
| assert_csr_loaded(dev_priv); |
| } |
| |
| void skl_enable_dc6(struct drm_i915_private *dev_priv) |
| { |
| assert_can_enable_dc6(dev_priv); |
| |
| DRM_DEBUG_KMS("Enabling DC6\n"); |
| |
| gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6); |
| |
| } |
| |
| void skl_disable_dc6(struct drm_i915_private *dev_priv) |
| { |
| DRM_DEBUG_KMS("Disabling DC6\n"); |
| |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); |
| } |
| |
| static void |
| gen9_sanitize_power_well_requests(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| enum skl_disp_power_wells power_well_id = power_well->data; |
| u32 val; |
| u32 mask; |
| |
| mask = SKL_POWER_WELL_REQ(power_well_id); |
| |
| val = I915_READ(HSW_PWR_WELL_KVMR); |
| if (WARN_ONCE(val & mask, "Clearing unexpected KVMR request for %s\n", |
| power_well->name)) |
| I915_WRITE(HSW_PWR_WELL_KVMR, val & ~mask); |
| |
| val = I915_READ(HSW_PWR_WELL_BIOS); |
| val |= I915_READ(HSW_PWR_WELL_DEBUG); |
| |
| if (!(val & mask)) |
| return; |
| |
| /* |
| * DMC is known to force on the request bits for power well 1 on SKL |
| * and BXT and the misc IO power well on SKL but we don't expect any |
| * other request bits to be set, so WARN for those. |
| */ |
| if (power_well_id == SKL_DISP_PW_1 || |
| (IS_SKYLAKE(dev_priv) && power_well_id == SKL_DISP_PW_MISC_IO)) |
| DRM_DEBUG_DRIVER("Clearing auxiliary requests for %s forced on " |
| "by DMC\n", power_well->name); |
| else |
| WARN_ONCE(1, "Clearing unexpected auxiliary requests for %s\n", |
| power_well->name); |
| |
| I915_WRITE(HSW_PWR_WELL_BIOS, val & ~mask); |
| I915_WRITE(HSW_PWR_WELL_DEBUG, val & ~mask); |
| } |
| |
| static void skl_set_power_well(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well, bool enable) |
| { |
| uint32_t tmp, fuse_status; |
| uint32_t req_mask, state_mask; |
| bool is_enabled, enable_requested, check_fuse_status = false; |
| |
| tmp = I915_READ(HSW_PWR_WELL_DRIVER); |
| fuse_status = I915_READ(SKL_FUSE_STATUS); |
| |
| switch (power_well->data) { |
| case SKL_DISP_PW_1: |
| if (wait_for((I915_READ(SKL_FUSE_STATUS) & |
| SKL_FUSE_PG0_DIST_STATUS), 1)) { |
| DRM_ERROR("PG0 not enabled\n"); |
| return; |
| } |
| break; |
| case SKL_DISP_PW_2: |
| if (!(fuse_status & SKL_FUSE_PG1_DIST_STATUS)) { |
| DRM_ERROR("PG1 in disabled state\n"); |
| return; |
| } |
| break; |
| case SKL_DISP_PW_DDI_A_E: |
| case SKL_DISP_PW_DDI_B: |
| case SKL_DISP_PW_DDI_C: |
| case SKL_DISP_PW_DDI_D: |
| case SKL_DISP_PW_MISC_IO: |
| break; |
| default: |
| WARN(1, "Unknown power well %lu\n", power_well->data); |
| return; |
| } |
| |
| req_mask = SKL_POWER_WELL_REQ(power_well->data); |
| enable_requested = tmp & req_mask; |
| state_mask = SKL_POWER_WELL_STATE(power_well->data); |
| is_enabled = tmp & state_mask; |
| |
| if (!enable && enable_requested) |
| skl_power_well_pre_disable(dev_priv, power_well); |
| |
| if (enable) { |
| if (!enable_requested) { |
| WARN((tmp & state_mask) && |
| !I915_READ(HSW_PWR_WELL_BIOS), |
| "Invalid for power well status to be enabled, unless done by the BIOS, \ |
| when request is to disable!\n"); |
| I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask); |
| } |
| |
| if (!is_enabled) { |
| DRM_DEBUG_KMS("Enabling %s\n", power_well->name); |
| check_fuse_status = true; |
| } |
| } else { |
| if (enable_requested) { |
| I915_WRITE(HSW_PWR_WELL_DRIVER, tmp & ~req_mask); |
| POSTING_READ(HSW_PWR_WELL_DRIVER); |
| DRM_DEBUG_KMS("Disabling %s\n", power_well->name); |
| } |
| |
| if (IS_SKYLAKE(dev_priv) || IS_BROXTON(dev_priv)) |
| gen9_sanitize_power_well_requests(dev_priv, power_well); |
| } |
| |
| if (wait_for(!!(I915_READ(HSW_PWR_WELL_DRIVER) & state_mask) == enable, |
| 1)) |
| DRM_ERROR("%s %s timeout\n", |
| power_well->name, enable ? "enable" : "disable"); |
| |
| if (check_fuse_status) { |
| if (power_well->data == SKL_DISP_PW_1) { |
| if (wait_for((I915_READ(SKL_FUSE_STATUS) & |
| SKL_FUSE_PG1_DIST_STATUS), 1)) |
| DRM_ERROR("PG1 distributing status timeout\n"); |
| } else if (power_well->data == SKL_DISP_PW_2) { |
| if (wait_for((I915_READ(SKL_FUSE_STATUS) & |
| SKL_FUSE_PG2_DIST_STATUS), 1)) |
| DRM_ERROR("PG2 distributing status timeout\n"); |
| } |
| } |
| |
| if (enable && !is_enabled) |
| skl_power_well_post_enable(dev_priv, power_well); |
| } |
| |
| static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| hsw_set_power_well(dev_priv, power_well, power_well->count > 0); |
| |
| /* |
| * We're taking over the BIOS, so clear any requests made by it since |
| * the driver is in charge now. |
| */ |
| if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST) |
| I915_WRITE(HSW_PWR_WELL_BIOS, 0); |
| } |
| |
| static void hsw_power_well_enable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| hsw_set_power_well(dev_priv, power_well, true); |
| } |
| |
| static void hsw_power_well_disable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| hsw_set_power_well(dev_priv, power_well, false); |
| } |
| |
| static bool skl_power_well_enabled(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| uint32_t mask = SKL_POWER_WELL_REQ(power_well->data) | |
| SKL_POWER_WELL_STATE(power_well->data); |
| |
| return (I915_READ(HSW_PWR_WELL_DRIVER) & mask) == mask; |
| } |
| |
| static void skl_power_well_sync_hw(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| skl_set_power_well(dev_priv, power_well, power_well->count > 0); |
| |
| /* Clear any request made by BIOS as driver is taking over */ |
| I915_WRITE(HSW_PWR_WELL_BIOS, 0); |
| } |
| |
| static void skl_power_well_enable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| skl_set_power_well(dev_priv, power_well, true); |
| } |
| |
| static void skl_power_well_disable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| skl_set_power_well(dev_priv, power_well, false); |
| } |
| |
| static bool gen9_dc_off_power_well_enabled(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| return (I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0; |
| } |
| |
| static void gen9_dc_off_power_well_enable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); |
| } |
| |
| static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC6) |
| skl_enable_dc6(dev_priv); |
| else if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC5) |
| gen9_enable_dc5(dev_priv); |
| } |
| |
| static void gen9_dc_off_power_well_sync_hw(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| if (power_well->count > 0) |
| gen9_dc_off_power_well_enable(dev_priv, power_well); |
| else |
| gen9_dc_off_power_well_disable(dev_priv, power_well); |
| } |
| |
| static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| } |
| |
| static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| return true; |
| } |
| |
| static void vlv_set_power_well(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well, bool enable) |
| { |
| enum punit_power_well power_well_id = power_well->data; |
| u32 mask; |
| u32 state; |
| u32 ctrl; |
| |
| mask = PUNIT_PWRGT_MASK(power_well_id); |
| state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) : |
| PUNIT_PWRGT_PWR_GATE(power_well_id); |
| |
| mutex_lock(&dev_priv->rps.hw_lock); |
| |
| #define COND \ |
| ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state) |
| |
| if (COND) |
| goto out; |
| |
| ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); |
| ctrl &= ~mask; |
| ctrl |= state; |
| vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl); |
| |
| if (wait_for(COND, 100)) |
| DRM_ERROR("timeout setting power well state %08x (%08x)\n", |
| state, |
| vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); |
| |
| #undef COND |
| |
| out: |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| } |
| |
| static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| vlv_set_power_well(dev_priv, power_well, power_well->count > 0); |
| } |
| |
| static void vlv_power_well_enable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| vlv_set_power_well(dev_priv, power_well, true); |
| } |
| |
| static void vlv_power_well_disable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| vlv_set_power_well(dev_priv, power_well, false); |
| } |
| |
| static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| int power_well_id = power_well->data; |
| bool enabled = false; |
| u32 mask; |
| u32 state; |
| u32 ctrl; |
| |
| mask = PUNIT_PWRGT_MASK(power_well_id); |
| ctrl = PUNIT_PWRGT_PWR_ON(power_well_id); |
| |
| mutex_lock(&dev_priv->rps.hw_lock); |
| |
| state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask; |
| /* |
| * We only ever set the power-on and power-gate states, anything |
| * else is unexpected. |
| */ |
| WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) && |
| state != PUNIT_PWRGT_PWR_GATE(power_well_id)); |
| if (state == ctrl) |
| enabled = true; |
| |
| /* |
| * A transient state at this point would mean some unexpected party |
| * is poking at the power controls too. |
| */ |
| ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask; |
| WARN_ON(ctrl != state); |
| |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| |
| return enabled; |
| } |
| |
| static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv) |
| { |
| I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE); |
| |
| /* |
| * Disable trickle feed and enable pnd deadline calculation |
| */ |
| I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE); |
| I915_WRITE(CBR1_VLV, 0); |
| } |
| |
| static void vlv_display_power_well_init(struct drm_i915_private *dev_priv) |
| { |
| enum pipe pipe; |
| |
| /* |
| * Enable the CRI clock source so we can get at the |
| * display and the reference clock for VGA |
| * hotplug / manual detection. Supposedly DSI also |
| * needs the ref clock up and running. |
| * |
| * CHV DPLL B/C have some issues if VGA mode is enabled. |
| */ |
| for_each_pipe(dev_priv->dev, pipe) { |
| u32 val = I915_READ(DPLL(pipe)); |
| |
| val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; |
| if (pipe != PIPE_A) |
| val |= DPLL_INTEGRATED_CRI_CLK_VLV; |
| |
| I915_WRITE(DPLL(pipe), val); |
| } |
| |
| vlv_init_display_clock_gating(dev_priv); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| valleyview_enable_display_irqs(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| /* |
| * During driver initialization/resume we can avoid restoring the |
| * part of the HW/SW state that will be inited anyway explicitly. |
| */ |
| if (dev_priv->power_domains.initializing) |
| return; |
| |
| intel_hpd_init(dev_priv); |
| |
| i915_redisable_vga_power_on(dev_priv->dev); |
| } |
| |
| static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv) |
| { |
| spin_lock_irq(&dev_priv->irq_lock); |
| valleyview_disable_display_irqs(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| /* make sure we're done processing display irqs */ |
| synchronize_irq(dev_priv->dev->irq); |
| |
| vlv_power_sequencer_reset(dev_priv); |
| } |
| |
| static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D); |
| |
| vlv_set_power_well(dev_priv, power_well, true); |
| |
| vlv_display_power_well_init(dev_priv); |
| } |
| |
| static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D); |
| |
| vlv_display_power_well_deinit(dev_priv); |
| |
| vlv_set_power_well(dev_priv, power_well, false); |
| } |
| |
| static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC); |
| |
| /* since ref/cri clock was enabled */ |
| udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ |
| |
| vlv_set_power_well(dev_priv, power_well, true); |
| |
| /* |
| * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - |
| * 6. De-assert cmn_reset/side_reset. Same as VLV X0. |
| * a. GUnit 0x2110 bit[0] set to 1 (def 0) |
| * b. The other bits such as sfr settings / modesel may all |
| * be set to 0. |
| * |
| * This should only be done on init and resume from S3 with |
| * both PLLs disabled, or we risk losing DPIO and PLL |
| * synchronization. |
| */ |
| I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST); |
| } |
| |
| static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| enum pipe pipe; |
| |
| WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC); |
| |
| for_each_pipe(dev_priv, pipe) |
| assert_pll_disabled(dev_priv, pipe); |
| |
| /* Assert common reset */ |
| I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST); |
| |
| vlv_set_power_well(dev_priv, power_well, false); |
| } |
| |
| #define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1) |
| |
| static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv, |
| int power_well_id) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; |
| int i; |
| |
| for (i = 0; i < power_domains->power_well_count; i++) { |
| struct i915_power_well *power_well; |
| |
| power_well = &power_domains->power_wells[i]; |
| if (power_well->data == power_well_id) |
| return power_well; |
| } |
| |
| return NULL; |
| } |
| |
| #define BITS_SET(val, bits) (((val) & (bits)) == (bits)) |
| |
| static void assert_chv_phy_status(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_well *cmn_bc = |
| lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC); |
| struct i915_power_well *cmn_d = |
| lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_D); |
| u32 phy_control = dev_priv->chv_phy_control; |
| u32 phy_status = 0; |
| u32 phy_status_mask = 0xffffffff; |
| u32 tmp; |
| |
| /* |
| * The BIOS can leave the PHY is some weird state |
| * where it doesn't fully power down some parts. |
| * Disable the asserts until the PHY has been fully |
| * reset (ie. the power well has been disabled at |
| * least once). |
| */ |
| if (!dev_priv->chv_phy_assert[DPIO_PHY0]) |
| phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0) | |
| PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0) | |
| PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1) | |
| PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1) | |
| PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0) | |
| PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1)); |
| |
| if (!dev_priv->chv_phy_assert[DPIO_PHY1]) |
| phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0) | |
| PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0) | |
| PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1)); |
| |
| if (cmn_bc->ops->is_enabled(dev_priv, cmn_bc)) { |
| phy_status |= PHY_POWERGOOD(DPIO_PHY0); |
| |
| /* this assumes override is only used to enable lanes */ |
| if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0)) == 0) |
| phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0); |
| |
| if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1)) == 0) |
| phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1); |
| |
| /* CL1 is on whenever anything is on in either channel */ |
| if (BITS_SET(phy_control, |
| PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0) | |
| PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1))) |
| phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0); |
| |
| /* |
| * The DPLLB check accounts for the pipe B + port A usage |
| * with CL2 powered up but all the lanes in the second channel |
| * powered down. |
| */ |
| if (BITS_SET(phy_control, |
| PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)) && |
| (I915_READ(DPLL(PIPE_B)) & DPLL_VCO_ENABLE) == 0) |
| phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1); |
| |
| if (BITS_SET(phy_control, |
| PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH0))) |
| phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0); |
| if (BITS_SET(phy_control, |
| PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH0))) |
| phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1); |
| |
| if (BITS_SET(phy_control, |
| PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH1))) |
| phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0); |
| if (BITS_SET(phy_control, |
| PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH1))) |
| phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1); |
| } |
| |
| if (cmn_d->ops->is_enabled(dev_priv, cmn_d)) { |
| phy_status |= PHY_POWERGOOD(DPIO_PHY1); |
| |
| /* this assumes override is only used to enable lanes */ |
| if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0)) == 0) |
| phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0); |
| |
| if (BITS_SET(phy_control, |
| PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0))) |
| phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0); |
| |
| if (BITS_SET(phy_control, |
| PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY1, DPIO_CH0))) |
| phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0); |
| if (BITS_SET(phy_control, |
| PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY1, DPIO_CH0))) |
| phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1); |
| } |
| |
| phy_status &= phy_status_mask; |
| |
| /* |
| * The PHY may be busy with some initial calibration and whatnot, |
| * so the power state can take a while to actually change. |
| */ |
| if (wait_for((tmp = I915_READ(DISPLAY_PHY_STATUS) & phy_status_mask) == phy_status, 10)) |
| WARN(phy_status != tmp, |
| "Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n", |
| tmp, phy_status, dev_priv->chv_phy_control); |
| } |
| |
| #undef BITS_SET |
| |
| static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| enum dpio_phy phy; |
| enum pipe pipe; |
| uint32_t tmp; |
| |
| WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC && |
| power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D); |
| |
| if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) { |
| pipe = PIPE_A; |
| phy = DPIO_PHY0; |
| } else { |
| pipe = PIPE_C; |
| phy = DPIO_PHY1; |
| } |
| |
| /* since ref/cri clock was enabled */ |
| udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ |
| vlv_set_power_well(dev_priv, power_well, true); |
| |
| /* Poll for phypwrgood signal */ |
| if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1)) |
| DRM_ERROR("Display PHY %d is not power up\n", phy); |
| |
| mutex_lock(&dev_priv->sb_lock); |
| |
| /* Enable dynamic power down */ |
| tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW28); |
| tmp |= DPIO_DYNPWRDOWNEN_CH0 | DPIO_CL1POWERDOWNEN | |
| DPIO_SUS_CLK_CONFIG_GATE_CLKREQ; |
| vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW28, tmp); |
| |
| if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) { |
| tmp = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW6_CH1); |
| tmp |= DPIO_DYNPWRDOWNEN_CH1; |
| vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW6_CH1, tmp); |
| } else { |
| /* |
| * Force the non-existing CL2 off. BXT does this |
| * too, so maybe it saves some power even though |
| * CL2 doesn't exist? |
| */ |
| tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30); |
| tmp |= DPIO_CL2_LDOFUSE_PWRENB; |
| vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, tmp); |
| } |
| |
| mutex_unlock(&dev_priv->sb_lock); |
| |
| dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(phy); |
| I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control); |
| |
| DRM_DEBUG_KMS("Enabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n", |
| phy, dev_priv->chv_phy_control); |
| |
| assert_chv_phy_status(dev_priv); |
| } |
| |
| static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| enum dpio_phy phy; |
| |
| WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC && |
| power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D); |
| |
| if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) { |
| phy = DPIO_PHY0; |
| assert_pll_disabled(dev_priv, PIPE_A); |
| assert_pll_disabled(dev_priv, PIPE_B); |
| } else { |
| phy = DPIO_PHY1; |
| assert_pll_disabled(dev_priv, PIPE_C); |
| } |
| |
| dev_priv->chv_phy_control &= ~PHY_COM_LANE_RESET_DEASSERT(phy); |
| I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control); |
| |
| vlv_set_power_well(dev_priv, power_well, false); |
| |
| DRM_DEBUG_KMS("Disabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n", |
| phy, dev_priv->chv_phy_control); |
| |
| /* PHY is fully reset now, so we can enable the PHY state asserts */ |
| dev_priv->chv_phy_assert[phy] = true; |
| |
| assert_chv_phy_status(dev_priv); |
| } |
| |
| static void assert_chv_phy_powergate(struct drm_i915_private *dev_priv, enum dpio_phy phy, |
| enum dpio_channel ch, bool override, unsigned int mask) |
| { |
| enum pipe pipe = phy == DPIO_PHY0 ? PIPE_A : PIPE_C; |
| u32 reg, val, expected, actual; |
| |
| /* |
| * The BIOS can leave the PHY is some weird state |
| * where it doesn't fully power down some parts. |
| * Disable the asserts until the PHY has been fully |
| * reset (ie. the power well has been disabled at |
| * least once). |
| */ |
| if (!dev_priv->chv_phy_assert[phy]) |
| return; |
| |
| if (ch == DPIO_CH0) |
| reg = _CHV_CMN_DW0_CH0; |
| else |
| reg = _CHV_CMN_DW6_CH1; |
| |
| mutex_lock(&dev_priv->sb_lock); |
| val = vlv_dpio_read(dev_priv, pipe, reg); |
| mutex_unlock(&dev_priv->sb_lock); |
| |
| /* |
| * This assumes !override is only used when the port is disabled. |
| * All lanes should power down even without the override when |
| * the port is disabled. |
| */ |
| if (!override || mask == 0xf) { |
| expected = DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN; |
| /* |
| * If CH1 common lane is not active anymore |
| * (eg. for pipe B DPLL) the entire channel will |
| * shut down, which causes the common lane registers |
| * to read as 0. That means we can't actually check |
| * the lane power down status bits, but as the entire |
| * register reads as 0 it's a good indication that the |
| * channel is indeed entirely powered down. |
| */ |
| if (ch == DPIO_CH1 && val == 0) |
| expected = 0; |
| } else if (mask != 0x0) { |
| expected = DPIO_ANYDL_POWERDOWN; |
| } else { |
| expected = 0; |
| } |
| |
| if (ch == DPIO_CH0) |
| actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH0; |
| else |
| actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH1; |
| actual &= DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN; |
| |
| WARN(actual != expected, |
| "Unexpected DPIO lane power down: all %d, any %d. Expected: all %d, any %d. (0x%x = 0x%08x)\n", |
| !!(actual & DPIO_ALLDL_POWERDOWN), !!(actual & DPIO_ANYDL_POWERDOWN), |
| !!(expected & DPIO_ALLDL_POWERDOWN), !!(expected & DPIO_ANYDL_POWERDOWN), |
| reg, val); |
| } |
| |
| bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy, |
| enum dpio_channel ch, bool override) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; |
| bool was_override; |
| |
| mutex_lock(&power_domains->lock); |
| |
| was_override = dev_priv->chv_phy_control & PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); |
| |
| if (override == was_override) |
| goto out; |
| |
| if (override) |
| dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); |
| else |
| dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); |
| |
| I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control); |
| |
| DRM_DEBUG_KMS("Power gating DPIO PHY%d CH%d (DPIO_PHY_CONTROL=0x%08x)\n", |
| phy, ch, dev_priv->chv_phy_control); |
| |
| assert_chv_phy_status(dev_priv); |
| |
| out: |
| mutex_unlock(&power_domains->lock); |
| |
| return was_override; |
| } |
| |
| void chv_phy_powergate_lanes(struct intel_encoder *encoder, |
| bool override, unsigned int mask) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; |
| enum dpio_phy phy = vlv_dport_to_phy(enc_to_dig_port(&encoder->base)); |
| enum dpio_channel ch = vlv_dport_to_channel(enc_to_dig_port(&encoder->base)); |
| |
| mutex_lock(&power_domains->lock); |
| |
| dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD(0xf, phy, ch); |
| dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD(mask, phy, ch); |
| |
| if (override) |
| dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); |
| else |
| dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); |
| |
| I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control); |
| |
| DRM_DEBUG_KMS("Power gating DPIO PHY%d CH%d lanes 0x%x (PHY_CONTROL=0x%08x)\n", |
| phy, ch, mask, dev_priv->chv_phy_control); |
| |
| assert_chv_phy_status(dev_priv); |
| |
| assert_chv_phy_powergate(dev_priv, phy, ch, override, mask); |
| |
| mutex_unlock(&power_domains->lock); |
| } |
| |
| static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| enum pipe pipe = power_well->data; |
| bool enabled; |
| u32 state, ctrl; |
| |
| mutex_lock(&dev_priv->rps.hw_lock); |
| |
| state = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe); |
| /* |
| * We only ever set the power-on and power-gate states, anything |
| * else is unexpected. |
| */ |
| WARN_ON(state != DP_SSS_PWR_ON(pipe) && state != DP_SSS_PWR_GATE(pipe)); |
| enabled = state == DP_SSS_PWR_ON(pipe); |
| |
| /* |
| * A transient state at this point would mean some unexpected party |
| * is poking at the power controls too. |
| */ |
| ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSC_MASK(pipe); |
| WARN_ON(ctrl << 16 != state); |
| |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| |
| return enabled; |
| } |
| |
| static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well, |
| bool enable) |
| { |
| enum pipe pipe = power_well->data; |
| u32 state; |
| u32 ctrl; |
| |
| state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe); |
| |
| mutex_lock(&dev_priv->rps.hw_lock); |
| |
| #define COND \ |
| ((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe)) == state) |
| |
| if (COND) |
| goto out; |
| |
| ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); |
| ctrl &= ~DP_SSC_MASK(pipe); |
| ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); |
| vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, ctrl); |
| |
| if (wait_for(COND, 100)) |
| DRM_ERROR("timeout setting power well state %08x (%08x)\n", |
| state, |
| vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ)); |
| |
| #undef COND |
| |
| out: |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| } |
| |
| static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| WARN_ON_ONCE(power_well->data != PIPE_A); |
| |
| chv_set_pipe_power_well(dev_priv, power_well, power_well->count > 0); |
| } |
| |
| static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| WARN_ON_ONCE(power_well->data != PIPE_A); |
| |
| chv_set_pipe_power_well(dev_priv, power_well, true); |
| |
| vlv_display_power_well_init(dev_priv); |
| } |
| |
| static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well) |
| { |
| WARN_ON_ONCE(power_well->data != PIPE_A); |
| |
| vlv_display_power_well_deinit(dev_priv); |
| |
| chv_set_pipe_power_well(dev_priv, power_well, false); |
| } |
| |
| static void |
| __intel_display_power_get_domain(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; |
| struct i915_power_well *power_well; |
| int i; |
| |
| for_each_power_well(i, power_well, BIT(domain), power_domains) { |
| if (!power_well->count++) |
| intel_power_well_enable(dev_priv, power_well); |
| } |
| |
| power_domains->domain_use_count[domain]++; |
| } |
| |
| /** |
| * intel_display_power_get - grab a power domain reference |
| * @dev_priv: i915 device instance |
| * @domain: power domain to reference |
| * |
| * This function grabs a power domain reference for @domain and ensures that the |
| * power domain and all its parents are powered up. Therefore users should only |
| * grab a reference to the innermost power domain they need. |
| * |
| * Any power domain reference obtained by this function must have a symmetric |
| * call to intel_display_power_put() to release the reference again. |
| */ |
| void intel_display_power_get(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; |
| |
| intel_runtime_pm_get(dev_priv); |
| |
| mutex_lock(&power_domains->lock); |
| |
| __intel_display_power_get_domain(dev_priv, domain); |
| |
| mutex_unlock(&power_domains->lock); |
| } |
| |
| /** |
| * intel_display_power_get_if_enabled - grab a reference for an enabled display power domain |
| * @dev_priv: i915 device instance |
| * @domain: power domain to reference |
| * |
| * This function grabs a power domain reference for @domain and ensures that the |
| * power domain and all its parents are powered up. Therefore users should only |
| * grab a reference to the innermost power domain they need. |
| * |
| * Any power domain reference obtained by this function must have a symmetric |
| * call to intel_display_power_put() to release the reference again. |
| */ |
| bool intel_display_power_get_if_enabled(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; |
| bool is_enabled; |
| |
| if (!intel_runtime_pm_get_if_in_use(dev_priv)) |
| return false; |
| |
| mutex_lock(&power_domains->lock); |
| |
| if (__intel_display_power_is_enabled(dev_priv, domain)) { |
| __intel_display_power_get_domain(dev_priv, domain); |
| is_enabled = true; |
| } else { |
| is_enabled = false; |
| } |
| |
| mutex_unlock(&power_domains->lock); |
| |
| if (!is_enabled) |
| intel_runtime_pm_put(dev_priv); |
| |
| return is_enabled; |
| } |
| |
| /** |
| * intel_display_power_put - release a power domain reference |
| * @dev_priv: i915 device instance |
| * @domain: power domain to reference |
| * |
| * This function drops the power domain reference obtained by |
| * intel_display_power_get() and might power down the corresponding hardware |
| * block right away if this is the last reference. |
| */ |
| void intel_display_power_put(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_domains *power_domains; |
| struct i915_power_well *power_well; |
| int i; |
| |
| power_domains = &dev_priv->power_domains; |
| |
| mutex_lock(&power_domains->lock); |
| |
| WARN(!power_domains->domain_use_count[domain], |
| "Use count on domain %s is already zero\n", |
| intel_display_power_domain_str(domain)); |
| power_domains->domain_use_count[domain]--; |
| |
| for_each_power_well_rev(i, power_well, BIT(domain), power_domains) { |
| WARN(!power_well->count, |
| "Use count on power well %s is already zero", |
| power_well->name); |
| |
| if (!--power_well->count) |
| intel_power_well_disable(dev_priv, power_well); |
| } |
| |
| mutex_unlock(&power_domains->lock); |
| |
| intel_runtime_pm_put(dev_priv); |
| } |
| |
| #define HSW_ALWAYS_ON_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_PIPE_A) | \ |
| BIT(POWER_DOMAIN_TRANSCODER_EDP) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \ |
| BIT(POWER_DOMAIN_PORT_CRT) | \ |
| BIT(POWER_DOMAIN_PLLS) | \ |
| BIT(POWER_DOMAIN_AUX_A) | \ |
| BIT(POWER_DOMAIN_AUX_B) | \ |
| BIT(POWER_DOMAIN_AUX_C) | \ |
| BIT(POWER_DOMAIN_AUX_D) | \ |
| BIT(POWER_DOMAIN_GMBUS) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| #define HSW_DISPLAY_POWER_DOMAINS ( \ |
| (POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| |
| #define BDW_ALWAYS_ON_POWER_DOMAINS ( \ |
| HSW_ALWAYS_ON_POWER_DOMAINS | \ |
| BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER)) |
| #define BDW_DISPLAY_POWER_DOMAINS ( \ |
| (POWER_DOMAIN_MASK & ~BDW_ALWAYS_ON_POWER_DOMAINS) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| |
| #define VLV_ALWAYS_ON_POWER_DOMAINS BIT(POWER_DOMAIN_INIT) |
| #define VLV_DISPLAY_POWER_DOMAINS POWER_DOMAIN_MASK |
| |
| #define VLV_DPIO_CMN_BC_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ |
| BIT(POWER_DOMAIN_PORT_CRT) | \ |
| BIT(POWER_DOMAIN_AUX_B) | \ |
| BIT(POWER_DOMAIN_AUX_C) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| |
| #define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ |
| BIT(POWER_DOMAIN_AUX_B) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| |
| #define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ |
| BIT(POWER_DOMAIN_AUX_B) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| |
| #define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ |
| BIT(POWER_DOMAIN_AUX_C) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| |
| #define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ |
| BIT(POWER_DOMAIN_AUX_C) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| |
| #define CHV_DPIO_CMN_BC_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ |
| BIT(POWER_DOMAIN_AUX_B) | \ |
| BIT(POWER_DOMAIN_AUX_C) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| |
| #define CHV_DPIO_CMN_D_POWER_DOMAINS ( \ |
| BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \ |
| BIT(POWER_DOMAIN_AUX_D) | \ |
| BIT(POWER_DOMAIN_INIT)) |
| |
| static const struct i915_power_well_ops i9xx_always_on_power_well_ops = { |
| .sync_hw = i9xx_always_on_power_well_noop, |
| .enable = i9xx_always_on_power_well_noop, |
| .disable = i9xx_always_on_power_well_noop, |
| .is_enabled = i9xx_always_on_power_well_enabled, |
| }; |
| |
| static const struct i915_power_well_ops chv_pipe_power_well_ops = { |
| .sync_hw = chv_pipe_power_well_sync_hw, |
| .enable = chv_pipe_power_well_enable, |
| .disable = chv_pipe_power_well_disable, |
| .is_enabled = chv_pipe_power_well_enabled, |
| }; |
| |
| static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = { |
| .sync_hw = vlv_power_well_sync_hw, |
| .enable = chv_dpio_cmn_power_well_enable, |
| .disable = chv_dpio_cmn_power_well_disable, |
| .is_enabled = vlv_power_well_enabled, |
| }; |
| |
| static struct i915_power_well i9xx_always_on_power_well[] = { |
| { |
| .name = "always-on", |
| .always_on = 1, |
| .domains = POWER_DOMAIN_MASK, |
| .ops = &i9xx_always_on_power_well_ops, |
| }, |
| }; |
| |
| static const struct i915_power_well_ops hsw_power_well_ops = { |
| .sync_hw = hsw_power_well_sync_hw, |
| .enable = hsw_power_well_enable, |
| .disable = hsw_power_well_disable, |
| .is_enabled = hsw_power_well_enabled, |
| }; |
| |
| static const struct i915_power_well_ops skl_power_well_ops = { |
| .sync_hw = skl_power_well_sync_hw, |
| .enable = skl_power_well_enable, |
| .disable = skl_power_well_disable, |
| .is_enabled = skl_power_well_enabled, |
| }; |
| |
| static const struct i915_power_well_ops gen9_dc_off_power_well_ops = { |
| .sync_hw = gen9_dc_off_power_well_sync_hw, |
| .enable = gen9_dc_off_power_well_enable, |
| .disable = gen9_dc_off_power_well_disable, |
| .is_enabled = gen9_dc_off_power_well_enabled, |
| }; |
| |
| static struct i915_power_well hsw_power_wells[] = { |
| { |
| .name = "always-on", |
| .always_on = 1, |
| .domains = HSW_ALWAYS_ON_POWER_DOMAINS, |
| .ops = &i9xx_always_on_power_well_ops, |
| }, |
| { |
| .name = "display", |
| .domains = HSW_DISPLAY_POWER_DOMAINS, |
| .ops = &hsw_power_well_ops, |
| }, |
| }; |
| |
| static struct i915_power_well bdw_power_wells[] = { |
| { |
| .name = "always-on", |
| .always_on = 1, |
| .domains = BDW_ALWAYS_ON_POWER_DOMAINS, |
| .ops = &i9xx_always_on_power_well_ops, |
| }, |
| { |
| .name = "display", |
| .domains = BDW_DISPLAY_POWER_DOMAINS, |
| .ops = &hsw_power_well_ops, |
| }, |
| }; |
| |
| static const struct i915_power_well_ops vlv_display_power_well_ops = { |
| .sync_hw = vlv_power_well_sync_hw, |
| .enable = vlv_display_power_well_enable, |
| .disable = vlv_display_power_well_disable, |
| .is_enabled = vlv_power_well_enabled, |
| }; |
| |
| static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = { |
| .sync_hw = vlv_power_well_sync_hw, |
| .enable = vlv_dpio_cmn_power_well_enable, |
| .disable = vlv_dpio_cmn_power_well_disable, |
| .is_enabled = vlv_power_well_enabled, |
| }; |
| |
| static const struct i915_power_well_ops vlv_dpio_power_well_ops = { |
| .sync_hw = vlv_power_well_sync_hw, |
| .enable = vlv_power_well_enable, |
| .disable = vlv_power_well_disable, |
| .is_enabled = vlv_power_well_enabled, |
| }; |
| |
| static struct i915_power_well vlv_power_wells[] = { |
| { |
| .name = "always-on", |
| .always_on = 1, |
| .domains = VLV_ALWAYS_ON_POWER_DOMAINS, |
| .ops = &i9xx_always_on_power_well_ops, |
| .data = PUNIT_POWER_WELL_ALWAYS_ON, |
| }, |
| { |
| .name = "display", |
| .domains = VLV_DISPLAY_POWER_DOMAINS, |
| .data = PUNIT_POWER_WELL_DISP2D, |
| .ops = &vlv_display_power_well_ops, |
| }, |
| { |
| .name = "dpio-tx-b-01", |
| .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | |
| VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | |
| VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | |
| VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, |
| .ops = &vlv_dpio_power_well_ops, |
| .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01, |
| }, |
| { |
| .name = "dpio-tx-b-23", |
| .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | |
| VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | |
| VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | |
| VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, |
| .ops = &vlv_dpio_power_well_ops, |
| .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23, |
| }, |
| { |
| .name = "dpio-tx-c-01", |
| .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | |
| VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | |
| VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | |
| VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, |
| .ops = &vlv_dpio_power_well_ops, |
| .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01, |
| }, |
| { |
| .name = "dpio-tx-c-23", |
| .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | |
| VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | |
| VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | |
| VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, |
| .ops = &vlv_dpio_power_well_ops, |
| .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23, |
| }, |
| { |
| .name = "dpio-common", |
| .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS, |
| .data = PUNIT_POWER_WELL_DPIO_CMN_BC, |
| .ops = &vlv_dpio_cmn_power_well_ops, |
| }, |
| }; |
| |
| static struct i915_power_well chv_power_wells[] = { |
| { |
| .name = "always-on", |
| .always_on = 1, |
| .domains = VLV_ALWAYS_ON_POWER_DOMAINS, |
| .ops = &i9xx_always_on_power_well_ops, |
| }, |
| { |
| .name = "display", |
| /* |
| * Pipe A power well is the new disp2d well. Pipe B and C |
| * power wells don't actually exist. Pipe A power well is |
| * required for any pipe to work. |
| */ |
| .domains = VLV_DISPLAY_POWER_DOMAINS, |
| .data = PIPE_A, |
| .ops = &chv_pipe_power_well_ops, |
| }, |
| { |
| .name = "dpio-common-bc", |
| .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS, |
| .data = PUNIT_POWER_WELL_DPIO_CMN_BC, |
| .ops = &chv_dpio_cmn_power_well_ops, |
| }, |
| { |
| .name = "dpio-common-d", |
| .domains = CHV_DPIO_CMN_D_POWER_DOMAINS, |
| .data = PUNIT_POWER_WELL_DPIO_CMN_D, |
| .ops = &chv_dpio_cmn_power_well_ops, |
| }, |
| }; |
| |
| bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv, |
| int power_well_id) |
| { |
| struct i915_power_well *power_well; |
| bool ret; |
| |
| power_well = lookup_power_well(dev_priv, power_well_id); |
| ret = power_well->ops->is_enabled(dev_priv, power_well); |
| |
| return ret; |
| } |
| |
| static struct i915_power_well skl_power_wells[] = { |
| { |
| .name = "always-on", |
| .always_on = 1, |
| .domains = SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS, |
| .ops = &i9xx_always_on_power_well_ops, |
| .data = SKL_DISP_PW_ALWAYS_ON, |
| }, |
| { |
| .name = "power well 1", |
| /* Handled by the DMC firmware */ |
| .domains = 0, |
| .ops = &skl_power_well_ops, |
| .data = SKL_DISP_PW_1, |
| }, |
| { |
| .name = "MISC IO power well", |
| /* Handled by the DMC firmware */ |
| .domains = 0, |
| .ops = &skl_power_well_ops, |
| .data = SKL_DISP_PW_MISC_IO, |
| }, |
| { |
| .name = "DC off", |
| .domains = SKL_DISPLAY_DC_OFF_POWER_DOMAINS, |
| .ops = &gen9_dc_off_power_well_ops, |
| .data = SKL_DISP_PW_DC_OFF, |
| }, |
| { |
| .name = "power well 2", |
| .domains = SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS, |
| .ops = &skl_power_well_ops, |
| .data = SKL_DISP_PW_2, |
| }, |
| { |
| .name = "DDI A/E power well", |
| .domains = SKL_DISPLAY_DDI_A_E_POWER_DOMAINS, |
| .ops = &skl_power_well_ops, |
| .data = SKL_DISP_PW_DDI_A_E, |
| }, |
| { |
| .name = "DDI B power well", |
| .domains = SKL_DISPLAY_DDI_B_POWER_DOMAINS, |
| .ops = &skl_power_well_ops, |
| .data = SKL_DISP_PW_DDI_B, |
| }, |
| { |
| .name = "DDI C power well", |
| .domains = SKL_DISPLAY_DDI_C_POWER_DOMAINS, |
| .ops = &skl_power_well_ops, |
| .data = SKL_DISP_PW_DDI_C, |
| }, |
| { |
| .name = "DDI D power well", |
| .domains = SKL_DISPLAY_DDI_D_POWER_DOMAINS, |
| .ops = &skl_power_well_ops, |
| .data = SKL_DISP_PW_DDI_D, |
| }, |
| }; |
| |
| void skl_pw1_misc_io_init(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_well *well; |
| |
| if (!(IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))) |
| return; |
| |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_1); |
| intel_power_well_enable(dev_priv, well); |
| |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO); |
| intel_power_well_enable(dev_priv, well); |
| } |
| |
| void skl_pw1_misc_io_fini(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_well *well; |
| |
| if (!(IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))) |
| return; |
| |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_1); |
| intel_power_well_disable(dev_priv, well); |
| |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO); |
| intel_power_well_disable(dev_priv, well); |
| } |
| |
| static struct i915_power_well bxt_power_wells[] = { |
| { |
| .name = "always-on", |
| .always_on = 1, |
| .domains = BXT_DISPLAY_ALWAYS_ON_POWER_DOMAINS, |
| .ops = &i9xx_always_on_power_well_ops, |
| }, |
| { |
| .name = "power well 1", |
| .domains = BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS, |
| .ops = &skl_power_well_ops, |
| .data = SKL_DISP_PW_1, |
| }, |
| { |
| .name = "DC off", |
| .domains = BXT_DISPLAY_DC_OFF_POWER_DOMAINS, |
| .ops = &gen9_dc_off_power_well_ops, |
| .data = SKL_DISP_PW_DC_OFF, |
| }, |
| { |
| .name = "power well 2", |
| .domains = BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS, |
| .ops = &skl_power_well_ops, |
| .data = SKL_DISP_PW_2, |
| }, |
| }; |
| |
| static int |
| sanitize_disable_power_well_option(const struct drm_i915_private *dev_priv, |
| int disable_power_well) |
| { |
| if (disable_power_well >= 0) |
| return !!disable_power_well; |
| |
| if (IS_BROXTON(dev_priv)) { |
| DRM_DEBUG_KMS("Disabling display power well support\n"); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static uint32_t get_allowed_dc_mask(const struct drm_i915_private *dev_priv, |
| int enable_dc) |
| { |
| uint32_t mask; |
| int requested_dc; |
| int max_dc; |
| |
| if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { |
| max_dc = 2; |
| mask = 0; |
| } else if (IS_BROXTON(dev_priv)) { |
| max_dc = 1; |
| /* |
| * DC9 has a separate HW flow from the rest of the DC states, |
| * not depending on the DMC firmware. It's needed by system |
| * suspend/resume, so allow it unconditionally. |
| */ |
| mask = DC_STATE_EN_DC9; |
| } else { |
| max_dc = 0; |
| mask = 0; |
| } |
| |
| if (!i915.disable_power_well) |
| max_dc = 0; |
| |
| if (enable_dc >= 0 && enable_dc <= max_dc) { |
| requested_dc = enable_dc; |
| } else if (enable_dc == -1) { |
| requested_dc = max_dc; |
| } else if (enable_dc > max_dc && enable_dc <= 2) { |
| DRM_DEBUG_KMS("Adjusting requested max DC state (%d->%d)\n", |
| enable_dc, max_dc); |
| requested_dc = max_dc; |
| } else { |
| DRM_ERROR("Unexpected value for enable_dc (%d)\n", enable_dc); |
| requested_dc = max_dc; |
| } |
| |
| if (requested_dc > 1) |
| mask |= DC_STATE_EN_UPTO_DC6; |
| if (requested_dc > 0) |
| mask |= DC_STATE_EN_UPTO_DC5; |
| |
| DRM_DEBUG_KMS("Allowed DC state mask %02x\n", mask); |
| |
| return mask; |
| } |
| |
| #define set_power_wells(power_domains, __power_wells) ({ \ |
| (power_domains)->power_wells = (__power_wells); \ |
| (power_domains)->power_well_count = ARRAY_SIZE(__power_wells); \ |
| }) |
| |
| /** |
| * intel_power_domains_init - initializes the power domain structures |
| * @dev_priv: i915 device instance |
| * |
| * Initializes the power domain structures for @dev_priv depending upon the |
| * supported platform. |
| */ |
| int intel_power_domains_init(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; |
| |
| i915.disable_power_well = sanitize_disable_power_well_option(dev_priv, |
| i915.disable_power_well); |
| dev_priv->csr.allowed_dc_mask = get_allowed_dc_mask(dev_priv, |
| i915.enable_dc); |
| |
| BUILD_BUG_ON(POWER_DOMAIN_NUM > 31); |
| |
| mutex_init(&power_domains->lock); |
| |
| /* |
| * The enabling order will be from lower to higher indexed wells, |
| * the disabling order is reversed. |
| */ |
| if (IS_HASWELL(dev_priv)) { |
| set_power_wells(power_domains, hsw_power_wells); |
| } else if (IS_BROADWELL(dev_priv)) { |
| set_power_wells(power_domains, bdw_power_wells); |
| } else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { |
| set_power_wells(power_domains, skl_power_wells); |
| } else if (IS_BROXTON(dev_priv)) { |
| set_power_wells(power_domains, bxt_power_wells); |
| } else if (IS_CHERRYVIEW(dev_priv)) { |
| set_power_wells(power_domains, chv_power_wells); |
| } else if (IS_VALLEYVIEW(dev_priv)) { |
| set_power_wells(power_domains, vlv_power_wells); |
| } else { |
| set_power_wells(power_domains, i9xx_always_on_power_well); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * intel_power_domains_fini - finalizes the power domain structures |
| * @dev_priv: i915 device instance |
| * |
| * Finalizes the power domain structures for @dev_priv depending upon the |
| * supported platform. This function also disables runtime pm and ensures that |
| * the device stays powered up so that the driver can be reloaded. |
| */ |
| void intel_power_domains_fini(struct drm_i915_private *dev_priv) |
| { |
| struct device *device = &dev_priv->dev->pdev->dev; |
| |
| /* |
| * The i915.ko module is still not prepared to be loaded when |
| * the power well is not enabled, so just enable it in case |
| * we're going to unload/reload. |
| * The following also reacquires the RPM reference the core passed |
| * to the driver during loading, which is dropped in |
| * intel_runtime_pm_enable(). We have to hand back the control of the |
| * device to the core with this reference held. |
| */ |
| intel_display_set_init_power(dev_priv, true); |
| |
| /* Remove the refcount we took to keep power well support disabled. */ |
| if (!i915.disable_power_well) |
| intel_display_power_put(dev_priv, POWER_DOMAIN_INIT); |
| |
| /* |
| * Remove the refcount we took in intel_runtime_pm_enable() in case |
| * the platform doesn't support runtime PM. |
| */ |
| if (!HAS_RUNTIME_PM(dev_priv)) |
| pm_runtime_put(device); |
| } |
| |
| static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; |
| struct i915_power_well *power_well; |
| int i; |
| |
| mutex_lock(&power_domains->lock); |
| for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) { |
| power_well->ops->sync_hw(dev_priv, power_well); |
| power_well->hw_enabled = power_well->ops->is_enabled(dev_priv, |
| power_well); |
| } |
| mutex_unlock(&power_domains->lock); |
| } |
| |
| static void skl_display_core_init(struct drm_i915_private *dev_priv, |
| bool resume) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; |
| uint32_t val; |
| |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); |
| |
| /* enable PCH reset handshake */ |
| val = I915_READ(HSW_NDE_RSTWRN_OPT); |
| I915_WRITE(HSW_NDE_RSTWRN_OPT, val | RESET_PCH_HANDSHAKE_ENABLE); |
| |
| /* enable PG1 and Misc I/O */ |
| mutex_lock(&power_domains->lock); |
| skl_pw1_misc_io_init(dev_priv); |
| mutex_unlock(&power_domains->lock); |
| |
| if (!resume) |
| return; |
| |
| skl_init_cdclk(dev_priv); |
| |
| if (dev_priv->csr.dmc_payload) |
| intel_csr_load_program(dev_priv); |
| } |
| |
| static void skl_display_core_uninit(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; |
| |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); |
| |
| skl_uninit_cdclk(dev_priv); |
| |
| /* The spec doesn't call for removing the reset handshake flag */ |
| /* disable PG1 and Misc I/O */ |
| mutex_lock(&power_domains->lock); |
| skl_pw1_misc_io_fini(dev_priv); |
| mutex_unlock(&power_domains->lock); |
| } |
| |
| static void chv_phy_control_init(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_well *cmn_bc = |
| lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC); |
| struct i915_power_well *cmn_d = |
| lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_D); |
| |
| /* |
| * DISPLAY_PHY_CONTROL can get corrupted if read. As a |
| * workaround never ever read DISPLAY_PHY_CONTROL, and |
| * instead maintain a shadow copy ourselves. Use the actual |
| * power well state and lane status to reconstruct the |
| * expected initial value. |
| */ |
| dev_priv->chv_phy_control = |
| PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY0) | |
| PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY1) | |
| PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH0) | |
| PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH1) | |
| PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY1, DPIO_CH0); |
| |
| /* |
| * If all lanes are disabled we leave the override disabled |
| * with all power down bits cleared to match the state we |
| * would use after disabling the port. Otherwise enable the |
| * override and set the lane powerdown bits accding to the |
| * current lane status. |
| */ |
| if (cmn_bc->ops->is_enabled(dev_priv, cmn_bc)) { |
| uint32_t status = I915_READ(DPLL(PIPE_A)); |
| unsigned int mask; |
| |
| mask = status & DPLL_PORTB_READY_MASK; |
| if (mask == 0xf) |
| mask = 0x0; |
| else |
| dev_priv->chv_phy_control |= |
| PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0); |
| |
| dev_priv->chv_phy_control |= |
| PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH0); |
| |
| mask = (status & DPLL_PORTC_READY_MASK) >> 4; |
| if (mask == 0xf) |
| mask = 0x0; |
| else |
| dev_priv->chv_phy_control |= |
| PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1); |
| |
| dev_priv->chv_phy_control |= |
| PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH1); |
| |
| dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY0); |
| |
| dev_priv->chv_phy_assert[DPIO_PHY0] = false; |
| } else { |
| dev_priv->chv_phy_assert[DPIO_PHY0] = true; |
| } |
| |
| if (cmn_d->ops->is_enabled(dev_priv, cmn_d)) { |
| uint32_t status = I915_READ(DPIO_PHY_STATUS); |
| unsigned int mask; |
| |
| mask = status & DPLL_PORTD_READY_MASK; |
| |
| if (mask == 0xf) |
| mask = 0x0; |
| else |
| dev_priv->chv_phy_control |= |
| PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0); |
| |
| dev_priv->chv_phy_control |= |
| PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY1, DPIO_CH0); |
| |
| dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY1); |
| |
| dev_priv->chv_phy_assert[DPIO_PHY1] = false; |
| } else { |
| dev_priv->chv_phy_assert[DPIO_PHY1] = true; |
| } |
| |
| I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control); |
| |
| DRM_DEBUG_KMS("Initial PHY_CONTROL=0x%08x\n", |
| dev_priv->chv_phy_control); |
| } |
| |
| static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_well *cmn = |
| lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC); |
| struct i915_power_well *disp2d = |
| lookup_power_well(dev_priv, PUNIT_POWER_WELL_DISP2D); |
| |
| /* If the display might be already active skip this */ |
| if (cmn->ops->is_enabled(dev_priv, cmn) && |
| disp2d->ops->is_enabled(dev_priv, disp2d) && |
| I915_READ(DPIO_CTL) & DPIO_CMNRST) |
| return; |
| |
| DRM_DEBUG_KMS("toggling display PHY side reset\n"); |
| |
| /* cmnlane needs DPLL registers */ |
| disp2d->ops->enable(dev_priv, disp2d); |
| |
| /* |
| * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx: |
| * Need to assert and de-assert PHY SB reset by gating the |
| * common lane power, then un-gating it. |
| * Simply ungating isn't enough to reset the PHY enough to get |
| * ports and lanes running. |
| */ |
| cmn->ops->disable(dev_priv, cmn); |
| } |
| |
| /** |
| * intel_power_domains_init_hw - initialize hardware power domain state |
| * @dev_priv: i915 device instance |
| * |
| * This function initializes the hardware power domain state and enables all |
| * power domains using intel_display_set_init_power(). |
| */ |
| void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; |
| |
| power_domains->initializing = true; |
| |
| if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) { |
| skl_display_core_init(dev_priv, resume); |
| } else if (IS_CHERRYVIEW(dev)) { |
| mutex_lock(&power_domains->lock); |
| chv_phy_control_init(dev_priv); |
| mutex_unlock(&power_domains->lock); |
| } else if (IS_VALLEYVIEW(dev)) { |
| mutex_lock(&power_domains->lock); |
| vlv_cmnlane_wa(dev_priv); |
| mutex_unlock(&power_domains->lock); |
| } |
| |
| /* For now, we need the power well to be always enabled. */ |
| intel_display_set_init_power(dev_priv, true); |
| /* Disable power support if the user asked so. */ |
| if (!i915.disable_power_well) |
| intel_display_power_get(dev_priv, POWER_DOMAIN_INIT); |
| intel_power_domains_sync_hw(dev_priv); |
| power_domains->initializing = false; |
| } |
| |
| /** |
| * intel_power_domains_suspend - suspend power domain state |
| * @dev_priv: i915 device instance |
| * |
| * This function prepares the hardware power domain state before entering |
| * system suspend. It must be paired with intel_power_domains_init_hw(). |
| */ |
| void intel_power_domains_suspend(struct drm_i915_private *dev_priv) |
| { |
| /* |
| * Even if power well support was disabled we still want to disable |
| * power wells while we are system suspended. |
| */ |
| if (!i915.disable_power_well) |
| intel_display_power_put(dev_priv, POWER_DOMAIN_INIT); |
| |
| if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) |
| skl_display_core_uninit(dev_priv); |
| } |
| |
| /** |
| * intel_runtime_pm_get - grab a runtime pm reference |
| * @dev_priv: i915 device instance |
| * |
| * This function grabs a device-level runtime pm reference (mostly used for GEM |
| * code to ensure the GTT or GT is on) and ensures that it is powered up. |
| * |
| * Any runtime pm reference obtained by this function must have a symmetric |
| * call to intel_runtime_pm_put() to release the reference again. |
| */ |
| void intel_runtime_pm_get(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| struct device *device = &dev->pdev->dev; |
| |
| pm_runtime_get_sync(device); |
| |
| atomic_inc(&dev_priv->pm.wakeref_count); |
| assert_rpm_wakelock_held(dev_priv); |
| } |
| |
| /** |
| * intel_runtime_pm_get_if_in_use - grab a runtime pm reference if device in use |
| * @dev_priv: i915 device instance |
| * |
| * This function grabs a device-level runtime pm reference if the device is |
| * already in use and ensures that it is powered up. |
| * |
| * Any runtime pm reference obtained by this function must have a symmetric |
| * call to intel_runtime_pm_put() to release the reference again. |
| */ |
| bool intel_runtime_pm_get_if_in_use(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| struct device *device = &dev->pdev->dev; |
| |
| if (IS_ENABLED(CONFIG_PM)) { |
| int ret = pm_runtime_get_if_in_use(device); |
| |
| /* |
| * In cases runtime PM is disabled by the RPM core and we get |
| * an -EINVAL return value we are not supposed to call this |
| * function, since the power state is undefined. This applies |
| * atm to the late/early system suspend/resume handlers. |
| */ |
| WARN_ON_ONCE(ret < 0); |
| if (ret <= 0) |
| return false; |
| } |
| |
| atomic_inc(&dev_priv->pm.wakeref_count); |
| assert_rpm_wakelock_held(dev_priv); |
| |
| return true; |
| } |
| |
| /** |
| * intel_runtime_pm_get_noresume - grab a runtime pm reference |
| * @dev_priv: i915 device instance |
| * |
| * This function grabs a device-level runtime pm reference (mostly used for GEM |
| * code to ensure the GTT or GT is on). |
| * |
| * It will _not_ power up the device but instead only check that it's powered |
| * on. Therefore it is only valid to call this functions from contexts where |
| * the device is known to be powered up and where trying to power it up would |
| * result in hilarity and deadlocks. That pretty much means only the system |
| * suspend/resume code where this is used to grab runtime pm references for |
| * delayed setup down in work items. |
| * |
| * Any runtime pm reference obtained by this function must have a symmetric |
| * call to intel_runtime_pm_put() to release the reference again. |
| */ |
| void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| struct device *device = &dev->pdev->dev; |
| |
| assert_rpm_wakelock_held(dev_priv); |
| pm_runtime_get_noresume(device); |
| |
| atomic_inc(&dev_priv->pm.wakeref_count); |
| } |
| |
| /** |
| * intel_runtime_pm_put - release a runtime pm reference |
| * @dev_priv: i915 device instance |
| * |
| * This function drops the device-level runtime pm reference obtained by |
| * intel_runtime_pm_get() and might power down the corresponding |
| * hardware block right away if this is the last reference. |
| */ |
| void intel_runtime_pm_put(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| struct device *device = &dev->pdev->dev; |
| |
| assert_rpm_wakelock_held(dev_priv); |
| if (atomic_dec_and_test(&dev_priv->pm.wakeref_count)) |
| atomic_inc(&dev_priv->pm.atomic_seq); |
| |
| pm_runtime_mark_last_busy(device); |
| pm_runtime_put_autosuspend(device); |
| } |
| |
| /** |
| * intel_runtime_pm_enable - enable runtime pm |
| * @dev_priv: i915 device instance |
| * |
| * This function enables runtime pm at the end of the driver load sequence. |
| * |
| * Note that this function does currently not enable runtime pm for the |
| * subordinate display power domains. That is only done on the first modeset |
| * using intel_display_set_init_power(). |
| */ |
| void intel_runtime_pm_enable(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| struct device *device = &dev->pdev->dev; |
| |
| pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */ |
| pm_runtime_mark_last_busy(device); |
| |
| /* |
| * Take a permanent reference to disable the RPM functionality and drop |
| * it only when unloading the driver. Use the low level get/put helpers, |
| * so the driver's own RPM reference tracking asserts also work on |
| * platforms without RPM support. |
| */ |
| if (!HAS_RUNTIME_PM(dev)) { |
| pm_runtime_dont_use_autosuspend(device); |
| pm_runtime_get_sync(device); |
| } else { |
| pm_runtime_use_autosuspend(device); |
| } |
| |
| /* |
| * The core calls the driver load handler with an RPM reference held. |
| * We drop that here and will reacquire it during unloading in |
| * intel_power_domains_fini(). |
| */ |
| pm_runtime_put_autosuspend(device); |
| } |
| |