Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
new file mode 100644
index 0000000..eb8238c
--- /dev/null
+++ b/arch/arm/mach-footbridge/common.c
@@ -0,0 +1,205 @@
+/*
+ * linux/arch/arm/mach-footbridge/common.c
+ *
+ * Copyright (C) 1998-2000 Russell King, Dave Gilbert.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/init.h>
+
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+#include <asm/hardware/dec21285.h>
+
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+
+extern void __init isa_init_irq(unsigned int irq);
+
+unsigned int mem_fclk_21285 = 50000000;
+
+EXPORT_SYMBOL(mem_fclk_21285);
+
+static int __init parse_tag_memclk(const struct tag *tag)
+{
+ mem_fclk_21285 = tag->u.memclk.fmemclk;
+ return 0;
+}
+
+__tagtable(ATAG_MEMCLK, parse_tag_memclk);
+
+/*
+ * Footbridge IRQ translation table
+ * Converts from our IRQ numbers into FootBridge masks
+ */
+static const int fb_irq_mask[] = {
+ IRQ_MASK_UART_RX, /* 0 */
+ IRQ_MASK_UART_TX, /* 1 */
+ IRQ_MASK_TIMER1, /* 2 */
+ IRQ_MASK_TIMER2, /* 3 */
+ IRQ_MASK_TIMER3, /* 4 */
+ IRQ_MASK_IN0, /* 5 */
+ IRQ_MASK_IN1, /* 6 */
+ IRQ_MASK_IN2, /* 7 */
+ IRQ_MASK_IN3, /* 8 */
+ IRQ_MASK_DOORBELLHOST, /* 9 */
+ IRQ_MASK_DMA1, /* 10 */
+ IRQ_MASK_DMA2, /* 11 */
+ IRQ_MASK_PCI, /* 12 */
+ IRQ_MASK_SDRAMPARITY, /* 13 */
+ IRQ_MASK_I2OINPOST, /* 14 */
+ IRQ_MASK_PCI_ABORT, /* 15 */
+ IRQ_MASK_PCI_SERR, /* 16 */
+ IRQ_MASK_DISCARD_TIMER, /* 17 */
+ IRQ_MASK_PCI_DPERR, /* 18 */
+ IRQ_MASK_PCI_PERR, /* 19 */
+};
+
+static void fb_mask_irq(unsigned int irq)
+{
+ *CSR_IRQ_DISABLE = fb_irq_mask[_DC21285_INR(irq)];
+}
+
+static void fb_unmask_irq(unsigned int irq)
+{
+ *CSR_IRQ_ENABLE = fb_irq_mask[_DC21285_INR(irq)];
+}
+
+static struct irqchip fb_chip = {
+ .ack = fb_mask_irq,
+ .mask = fb_mask_irq,
+ .unmask = fb_unmask_irq,
+};
+
+static void __init __fb_init_irq(void)
+{
+ unsigned int irq;
+
+ /*
+ * setup DC21285 IRQs
+ */
+ *CSR_IRQ_DISABLE = -1;
+ *CSR_FIQ_DISABLE = -1;
+
+ for (irq = _DC21285_IRQ(0); irq < _DC21285_IRQ(20); irq++) {
+ set_irq_chip(irq, &fb_chip);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+}
+
+void __init footbridge_init_irq(void)
+{
+ __fb_init_irq();
+
+ if (!footbridge_cfn_mode())
+ return;
+
+ if (machine_is_ebsa285())
+ /* The following is dependent on which slot
+ * you plug the Southbridge card into. We
+ * currently assume that you plug it into
+ * the right-hand most slot.
+ */
+ isa_init_irq(IRQ_PCI);
+
+ if (machine_is_cats())
+ isa_init_irq(IRQ_IN2);
+
+ if (machine_is_netwinder())
+ isa_init_irq(IRQ_IN3);
+}
+
+/*
+ * Common mapping for all systems. Note that the outbound write flush is
+ * commented out since there is a "No Fix" problem with it. Not mapping
+ * it means that we have extra bullet protection on our feet.
+ */
+static struct map_desc fb_common_io_desc[] __initdata = {
+ { ARMCSR_BASE, DC21285_ARMCSR_BASE, ARMCSR_SIZE, MT_DEVICE },
+ { XBUS_BASE, 0x40000000, XBUS_SIZE, MT_DEVICE }
+};
+
+/*
+ * The mapping when the footbridge is in host mode. We don't map any of
+ * this when we are in add-in mode.
+ */
+static struct map_desc ebsa285_host_io_desc[] __initdata = {
+#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
+ { PCIMEM_BASE, DC21285_PCI_MEM, PCIMEM_SIZE, MT_DEVICE },
+ { PCICFG0_BASE, DC21285_PCI_TYPE_0_CONFIG, PCICFG0_SIZE, MT_DEVICE },
+ { PCICFG1_BASE, DC21285_PCI_TYPE_1_CONFIG, PCICFG1_SIZE, MT_DEVICE },
+ { PCIIACK_BASE, DC21285_PCI_IACK, PCIIACK_SIZE, MT_DEVICE },
+ { PCIO_BASE, DC21285_PCI_IO, PCIO_SIZE, MT_DEVICE }
+#endif
+};
+
+/*
+ * The CO-ebsa285 mapping.
+ */
+static struct map_desc co285_io_desc[] __initdata = {
+#ifdef CONFIG_ARCH_CO285
+ { PCIO_BASE, DC21285_PCI_IO, PCIO_SIZE, MT_DEVICE },
+ { PCIMEM_BASE, DC21285_PCI_MEM, PCIMEM_SIZE, MT_DEVICE }
+#endif
+};
+
+void __init footbridge_map_io(void)
+{
+ /*
+ * Set up the common mapping first; we need this to
+ * determine whether we're in host mode or not.
+ */
+ iotable_init(fb_common_io_desc, ARRAY_SIZE(fb_common_io_desc));
+
+ /*
+ * Now, work out what we've got to map in addition on this
+ * platform.
+ */
+ if (machine_is_co285())
+ iotable_init(co285_io_desc, ARRAY_SIZE(co285_io_desc));
+ if (footbridge_cfn_mode())
+ iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
+}
+
+#ifdef CONFIG_FOOTBRIDGE_ADDIN
+
+/*
+ * These two functions convert virtual addresses to PCI addresses and PCI
+ * addresses to virtual addresses. Note that it is only legal to use these
+ * on memory obtained via get_zeroed_page or kmalloc.
+ */
+unsigned long __virt_to_bus(unsigned long res)
+{
+ WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
+
+ return (res - PAGE_OFFSET) + (*CSR_PCISDRAMBASE & 0xfffffff0);
+}
+EXPORT_SYMBOL(__virt_to_bus);
+
+unsigned long __bus_to_virt(unsigned long res)
+{
+ res -= (*CSR_PCISDRAMBASE & 0xfffffff0);
+ res += PAGE_OFFSET;
+
+ WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
+
+ return res;
+}
+EXPORT_SYMBOL(__bus_to_virt);
+
+#endif