Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
new file mode 100644
index 0000000..4f3c3d5c
--- /dev/null
+++ b/arch/arm/mach-ixp2000/core.c
@@ -0,0 +1,390 @@
+/*
+ * arch/arm/mach-ixp2000/common.c
+ *
+ * Common routines used by all IXP2400/2800 based platforms.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (C) MontaVista Software, Inc.
+ *
+ * Based on work Copyright (C) 2002-2003 Intel Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/serial_core.h>
+#include <linux/mm.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+
+static DEFINE_SPINLOCK(ixp2000_slowport_lock);
+static unsigned long ixp2000_slowport_irq_flags;
+
+/*************************************************************************
+ * Slowport access routines
+ *************************************************************************/
+void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg)
+{
+
+ spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags);
+
+ old_cfg->CCR = *IXP2000_SLOWPORT_CCR;
+ old_cfg->WTC = *IXP2000_SLOWPORT_WTC2;
+ old_cfg->RTC = *IXP2000_SLOWPORT_RTC2;
+ old_cfg->PCR = *IXP2000_SLOWPORT_PCR;
+ old_cfg->ADC = *IXP2000_SLOWPORT_ADC;
+
+ ixp2000_reg_write(IXP2000_SLOWPORT_CCR, new_cfg->CCR);
+ ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC);
+ ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC);
+ ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR);
+ ixp2000_reg_write(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
+}
+
+void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
+{
+ ixp2000_reg_write(IXP2000_SLOWPORT_CCR, old_cfg->CCR);
+ ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC);
+ ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC);
+ ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR);
+ ixp2000_reg_write(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
+
+ spin_unlock_irqrestore(&ixp2000_slowport_lock,
+ ixp2000_slowport_irq_flags);
+}
+
+/*************************************************************************
+ * Chip specific mappings shared by all IXP2000 systems
+ *************************************************************************/
+static struct map_desc ixp2000_io_desc[] __initdata = {
+ {
+ .virtual = IXP2000_CAP_VIRT_BASE,
+ .physical = IXP2000_CAP_PHYS_BASE,
+ .length = IXP2000_CAP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IXP2000_INTCTL_VIRT_BASE,
+ .physical = IXP2000_INTCTL_PHYS_BASE,
+ .length = IXP2000_INTCTL_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IXP2000_PCI_CREG_VIRT_BASE,
+ .physical = IXP2000_PCI_CREG_PHYS_BASE,
+ .length = IXP2000_PCI_CREG_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IXP2000_PCI_CSR_VIRT_BASE,
+ .physical = IXP2000_PCI_CSR_PHYS_BASE,
+ .length = IXP2000_PCI_CSR_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IXP2000_PCI_IO_VIRT_BASE,
+ .physical = IXP2000_PCI_IO_PHYS_BASE,
+ .length = IXP2000_PCI_IO_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IXP2000_PCI_CFG0_VIRT_BASE,
+ .physical = IXP2000_PCI_CFG0_PHYS_BASE,
+ .length = IXP2000_PCI_CFG0_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IXP2000_PCI_CFG1_VIRT_BASE,
+ .physical = IXP2000_PCI_CFG1_PHYS_BASE,
+ .length = IXP2000_PCI_CFG1_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+static struct uart_port ixp2000_serial_port = {
+ .membase = (char *)(IXP2000_UART_VIRT_BASE + 3),
+ .mapbase = IXP2000_UART_PHYS_BASE + 3,
+ .irq = IRQ_IXP2000_UART,
+ .flags = UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 50000000,
+ .line = 0,
+ .type = PORT_XSCALE,
+ .fifosize = 16
+};
+
+void __init ixp2000_map_io(void)
+{
+ extern unsigned int processor_id;
+
+ /*
+ * On IXP2400 CPUs we need to use MT_IXP2000_DEVICE for
+ * tweaking the PMDs so XCB=101. On IXP2800s we use the normal
+ * PMD flags.
+ */
+ if ((processor_id & 0xfffffff0) == 0x69054190) {
+ int i;
+
+ printk(KERN_INFO "Enabling IXP2400 erratum #66 workaround\n");
+
+ for(i=0;i<ARRAY_SIZE(ixp2000_io_desc);i++)
+ ixp2000_io_desc[i].type = MT_IXP2000_DEVICE;
+ }
+
+ iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
+ early_serial_setup(&ixp2000_serial_port);
+
+ /* Set slowport to 8-bit mode. */
+ ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1);
+}
+
+/*************************************************************************
+ * Timer-tick functions for IXP2000
+ *************************************************************************/
+static unsigned ticks_per_jiffy;
+static unsigned ticks_per_usec;
+static unsigned next_jiffy_time;
+
+unsigned long ixp2000_gettimeoffset (void)
+{
+ unsigned long offset;
+
+ offset = next_jiffy_time - *IXP2000_T4_CSR;
+
+ return offset / ticks_per_usec;
+}
+
+static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ write_seqlock(&xtime_lock);
+
+ /* clear timer 1 */
+ ixp2000_reg_write(IXP2000_T1_CLR, 1);
+
+ while ((next_jiffy_time - *IXP2000_T4_CSR) > ticks_per_jiffy) {
+ timer_tick(regs);
+ next_jiffy_time -= ticks_per_jiffy;
+ }
+
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction ixp2000_timer_irq = {
+ .name = "IXP2000 Timer Tick",
+ .flags = SA_INTERRUPT,
+ .handler = ixp2000_timer_interrupt
+};
+
+void __init ixp2000_init_time(unsigned long tick_rate)
+{
+ ixp2000_reg_write(IXP2000_T1_CLR, 0);
+ ixp2000_reg_write(IXP2000_T4_CLR, 0);
+
+ ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
+ ticks_per_usec = tick_rate / 1000000;
+
+ ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1);
+ ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7));
+
+ /*
+ * We use T4 as a monotonic counter to track missed jiffies
+ */
+ ixp2000_reg_write(IXP2000_T4_CLD, -1);
+ ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7));
+ next_jiffy_time = 0xffffffff;
+
+ /* register for interrupt */
+ setup_irq(IRQ_IXP2000_TIMER1, &ixp2000_timer_irq);
+}
+
+/*************************************************************************
+ * GPIO helpers
+ *************************************************************************/
+static unsigned long GPIO_IRQ_rising_edge;
+static unsigned long GPIO_IRQ_falling_edge;
+static unsigned long GPIO_IRQ_level_low;
+static unsigned long GPIO_IRQ_level_high;
+
+void gpio_line_config(int line, int style)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if(style == GPIO_OUT) {
+ /* if it's an output, it ain't an interrupt anymore */
+ ixp2000_reg_write(IXP2000_GPIO_PDSR, (1 << line));
+ GPIO_IRQ_falling_edge &= ~(1 << line);
+ GPIO_IRQ_rising_edge &= ~(1 << line);
+ GPIO_IRQ_level_low &= ~(1 << line);
+ GPIO_IRQ_level_high &= ~(1 << line);
+ ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
+ ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
+ ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
+ ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
+ irq_desc[line+IRQ_IXP2000_GPIO0].valid = 0;
+ } else if(style == GPIO_IN) {
+ ixp2000_reg_write(IXP2000_GPIO_PDCR, (1 << line));
+ }
+
+ local_irq_restore(flags);
+}
+
+
+/*************************************************************************
+ * IRQ handling IXP2000
+ *************************************************************************/
+static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+ int i;
+ unsigned long status = *IXP2000_GPIO_INST;
+
+ for (i = 0; i <= 7; i++) {
+ if (status & (1<<i)) {
+ desc = irq_desc + i + IRQ_IXP2000_GPIO0;
+ desc->handle(i + IRQ_IXP2000_GPIO0, desc, regs);
+ }
+ }
+}
+
+static void ixp2000_GPIO_irq_mask_ack(unsigned int irq)
+{
+ ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
+ ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
+}
+
+static void ixp2000_GPIO_irq_mask(unsigned int irq)
+{
+ ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
+}
+
+static void ixp2000_GPIO_irq_unmask(unsigned int irq)
+{
+ ixp2000_reg_write(IXP2000_GPIO_INSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
+}
+
+static struct irqchip ixp2000_GPIO_irq_chip = {
+ .ack = ixp2000_GPIO_irq_mask_ack,
+ .mask = ixp2000_GPIO_irq_mask,
+ .unmask = ixp2000_GPIO_irq_unmask
+};
+
+static void ixp2000_pci_irq_mask(unsigned int irq)
+{
+ unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
+ if (irq == IRQ_IXP2000_PCIA)
+ ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
+ else if (irq == IRQ_IXP2000_PCIB)
+ ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
+}
+
+static void ixp2000_pci_irq_unmask(unsigned int irq)
+{
+ unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
+ if (irq == IRQ_IXP2000_PCIA)
+ ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 26)));
+ else if (irq == IRQ_IXP2000_PCIB)
+ ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27)));
+}
+
+static struct irqchip ixp2000_pci_irq_chip = {
+ .ack = ixp2000_pci_irq_mask,
+ .mask = ixp2000_pci_irq_mask,
+ .unmask = ixp2000_pci_irq_unmask
+};
+
+static void ixp2000_irq_mask(unsigned int irq)
+{
+ ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, (1 << irq));
+}
+
+static void ixp2000_irq_unmask(unsigned int irq)
+{
+ ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq));
+}
+
+static struct irqchip ixp2000_irq_chip = {
+ .ack = ixp2000_irq_mask,
+ .mask = ixp2000_irq_mask,
+ .unmask = ixp2000_irq_unmask
+};
+
+void __init ixp2000_init_irq(void)
+{
+ int irq;
+
+ /*
+ * Mask all sources
+ */
+ ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, 0xffffffff);
+ ixp2000_reg_write(IXP2000_FIQ_ENABLE_CLR, 0xffffffff);
+
+ /* clear all GPIO edge/level detects */
+ ixp2000_reg_write(IXP2000_GPIO_REDR, 0);
+ ixp2000_reg_write(IXP2000_GPIO_FEDR, 0);
+ ixp2000_reg_write(IXP2000_GPIO_LSHR, 0);
+ ixp2000_reg_write(IXP2000_GPIO_LSLR, 0);
+ ixp2000_reg_write(IXP2000_GPIO_INCR, -1);
+
+ /* clear PCI interrupt sources */
+ ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
+
+ /*
+ * Certain bits in the IRQ status register of the
+ * IXP2000 are reserved. Instead of trying to map
+ * things non 1:1 from bit position to IRQ number,
+ * we mark the reserved IRQs as invalid. This makes
+ * our mask/unmask code much simpler.
+ */
+ for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) {
+ if((1 << irq) & IXP2000_VALID_IRQ_MASK) {
+ set_irq_chip(irq, &ixp2000_irq_chip);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_flags(irq, IRQF_VALID);
+ } else set_irq_flags(irq, 0);
+ }
+
+ /*
+ * GPIO IRQs are invalid until someone sets the interrupt mode
+ * by calling gpio_line_set();
+ */
+ for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
+ set_irq_chip(irq, &ixp2000_GPIO_irq_chip);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_flags(irq, 0);
+ }
+ set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler);
+
+ /*
+ * Enable PCI irqs. The actual PCI[AB] decoding is done in
+ * entry-macro.S, so we don't need a chained handler for the
+ * PCI interrupt source.
+ */
+ ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI));
+ for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) {
+ set_irq_chip(irq, &ixp2000_pci_irq_chip);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+}
+