Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/arm/mach-omap/board-h3.c b/arch/arm/mach-omap/board-h3.c
new file mode 100644
index 0000000..486a5a0
--- /dev/null
+++ b/arch/arm/mach-omap/board-h3.c
@@ -0,0 +1,205 @@
+/*
+ * linux/arch/arm/mach-omap/board-h3.c
+ *
+ * This file contains OMAP1710 H3 specific code.
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/irqs.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/usb.h>
+
+#include "common.h"
+
+extern int omap_gpio_init(void);
+
+static int __initdata h3_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static struct mtd_partition h3_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct flash_platform_data h3_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = h3_partitions,
+ .nr_parts = ARRAY_SIZE(h3_partitions),
+};
+
+static struct resource h3_flash_resource = {
+ .start = OMAP_CS2B_PHYS,
+ .end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &h3_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &h3_flash_resource,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = OMAP1710_ETHR_START, /* Physical */
+ .end = OMAP1710_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(40),
+ .end = OMAP_GPIO_IRQ(40),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+#define GPTIMER_BASE 0xFFFB1400
+#define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800))
+#define GPTIMER_REGS_SIZE 0x46
+
+static struct resource intlat_resources[] = {
+ [0] = {
+ .start = GPTIMER_REGS(0), /* Physical */
+ .end = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = INT_1610_GPTIMER1,
+ .end = INT_1610_GPTIMER1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device intlat_device = {
+ .name = "omap_intlat",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(intlat_resources),
+ .resource = intlat_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &flash_device,
+ &smc91x_device,
+ &intlat_device,
+};
+
+static struct omap_usb_config h3_usb_config __initdata = {
+ /* usb1 has a Mini-AB port and external isp1301 transceiver */
+ .otg = 2,
+
+#ifdef CONFIG_USB_GADGET_OMAP
+ .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
+#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
+ .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
+#endif
+
+ .pins[1] = 3,
+};
+
+static struct omap_board_config_kernel h3_config[] = {
+ { OMAP_TAG_USB, &h3_usb_config },
+};
+
+static void __init h3_init(void)
+{
+ (void) platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init h3_init_smc91x(void)
+{
+ omap_cfg_reg(W15_1710_GPIO40);
+ if (omap_request_gpio(40) < 0) {
+ printk("Error requesting gpio 40 for smc91x irq\n");
+ return;
+ }
+ omap_set_gpio_edge_ctrl(40, OMAP_GPIO_FALLING_EDGE);
+}
+
+void h3_init_irq(void)
+{
+ omap_init_irq();
+ omap_gpio_init();
+ h3_init_smc91x();
+}
+
+static void __init h3_map_io(void)
+{
+ omap_map_io();
+ omap_serial_init(h3_serial_ports);
+}
+
+MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
+ MAINTAINER("Texas Instruments, Inc.")
+ BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
+ BOOT_PARAMS(0x10000100)
+ MAPIO(h3_map_io)
+ INITIRQ(h3_init_irq)
+ INIT_MACHINE(h3_init)
+ .timer = &omap_timer,
+MACHINE_END