Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h
new file mode 100644
index 0000000..8035f4f
--- /dev/null
+++ b/arch/arm/nwfpe/fpopcode.h
@@ -0,0 +1,479 @@
+/*
+ NetWinder Floating Point Emulator
+ (c) Rebel.COM, 1998,1999
+ (c) Philip Blundell, 2001
+
+ Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __FPOPCODE_H__
+#define __FPOPCODE_H__
+
+#include <linux/config.h>
+
+/*
+ARM Floating Point Instruction Classes
+| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+|c o n d|1 1 0 P|U|u|W|L| Rn |v| Fd |0|0|0|1| o f f s e t | CPDT
+|c o n d|1 1 0 P|U|w|W|L| Rn |x| Fd |0|0|1|0| o f f s e t | CPDT (copro 2)
+| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+|c o n d|1 1 1 0|a|b|c|d|e| Fn |j| Fd |0|0|0|1|f|g|h|0|i| Fm | CPDO
+|c o n d|1 1 1 0|a|b|c|L|e| Fn | Rd |0|0|0|1|f|g|h|1|i| Fm | CPRT
+|c o n d|1 1 1 0|a|b|c|1|e| Fn |1|1|1|1|0|0|0|1|f|g|h|1|i| Fm | comparisons
+| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+
+CPDT data transfer instructions
+ LDF, STF, LFM (copro 2), SFM (copro 2)
+
+CPDO dyadic arithmetic instructions
+ ADF, MUF, SUF, RSF, DVF, RDF,
+ POW, RPW, RMF, FML, FDV, FRD, POL
+
+CPDO monadic arithmetic instructions
+ MVF, MNF, ABS, RND, SQT, LOG, LGN, EXP,
+ SIN, COS, TAN, ASN, ACS, ATN, URD, NRM
+
+CPRT joint arithmetic/data transfer instructions
+ FIX (arithmetic followed by load/store)
+ FLT (load/store followed by arithmetic)
+ CMF, CNF CMFE, CNFE (comparisons)
+ WFS, RFS (write/read floating point status register)
+ WFC, RFC (write/read floating point control register)
+
+cond condition codes
+P pre/post index bit: 0 = postindex, 1 = preindex
+U up/down bit: 0 = stack grows down, 1 = stack grows up
+W write back bit: 1 = update base register (Rn)
+L load/store bit: 0 = store, 1 = load
+Rn base register
+Rd destination/source register
+Fd floating point destination register
+Fn floating point source register
+Fm floating point source register or floating point constant
+
+uv transfer length (TABLE 1)
+wx register count (TABLE 2)
+abcd arithmetic opcode (TABLES 3 & 4)
+ef destination size (rounding precision) (TABLE 5)
+gh rounding mode (TABLE 6)
+j dyadic/monadic bit: 0 = dyadic, 1 = monadic
+i constant bit: 1 = constant (TABLE 6)
+*/
+
+/*
+TABLE 1
++-------------------------+---+---+---------+---------+
+| Precision | u | v | FPSR.EP | length |
++-------------------------+---+---+---------+---------+
+| Single | 0 ü 0 | x | 1 words |
+| Double | 1 ü 1 | x | 2 words |
+| Extended | 1 ü 1 | x | 3 words |
+| Packed decimal | 1 ü 1 | 0 | 3 words |
+| Expanded packed decimal | 1 ü 1 | 1 | 4 words |
++-------------------------+---+---+---------+---------+
+Note: x = don't care
+*/
+
+/*
+TABLE 2
++---+---+---------------------------------+
+| w | x | Number of registers to transfer |
++---+---+---------------------------------+
+| 0 ü 1 | 1 |
+| 1 ü 0 | 2 |
+| 1 ü 1 | 3 |
+| 0 ü 0 | 4 |
++---+---+---------------------------------+
+*/
+
+/*
+TABLE 3: Dyadic Floating Point Opcodes
++---+---+---+---+----------+-----------------------+-----------------------+
+| a | b | c | d | Mnemonic | Description | Operation |
++---+---+---+---+----------+-----------------------+-----------------------+
+| 0 | 0 | 0 | 0 | ADF | Add | Fd := Fn + Fm |
+| 0 | 0 | 0 | 1 | MUF | Multiply | Fd := Fn * Fm |
+| 0 | 0 | 1 | 0 | SUF | Subtract | Fd := Fn - Fm |
+| 0 | 0 | 1 | 1 | RSF | Reverse subtract | Fd := Fm - Fn |
+| 0 | 1 | 0 | 0 | DVF | Divide | Fd := Fn / Fm |
+| 0 | 1 | 0 | 1 | RDF | Reverse divide | Fd := Fm / Fn |
+| 0 | 1 | 1 | 0 | POW | Power | Fd := Fn ^ Fm |
+| 0 | 1 | 1 | 1 | RPW | Reverse power | Fd := Fm ^ Fn |
+| 1 | 0 | 0 | 0 | RMF | Remainder | Fd := IEEE rem(Fn/Fm) |
+| 1 | 0 | 0 | 1 | FML | Fast Multiply | Fd := Fn * Fm |
+| 1 | 0 | 1 | 0 | FDV | Fast Divide | Fd := Fn / Fm |
+| 1 | 0 | 1 | 1 | FRD | Fast reverse divide | Fd := Fm / Fn |
+| 1 | 1 | 0 | 0 | POL | Polar angle (ArcTan2) | Fd := arctan2(Fn,Fm) |
+| 1 | 1 | 0 | 1 | | undefined instruction | trap |
+| 1 | 1 | 1 | 0 | | undefined instruction | trap |
+| 1 | 1 | 1 | 1 | | undefined instruction | trap |
++---+---+---+---+----------+-----------------------+-----------------------+
+Note: POW, RPW, POL are deprecated, and are available for backwards
+ compatibility only.
+*/
+
+/*
+TABLE 4: Monadic Floating Point Opcodes
++---+---+---+---+----------+-----------------------+-----------------------+
+| a | b | c | d | Mnemonic | Description | Operation |
++---+---+---+---+----------+-----------------------+-----------------------+
+| 0 | 0 | 0 | 0 | MVF | Move | Fd := Fm |
+| 0 | 0 | 0 | 1 | MNF | Move negated | Fd := - Fm |
+| 0 | 0 | 1 | 0 | ABS | Absolute value | Fd := abs(Fm) |
+| 0 | 0 | 1 | 1 | RND | Round to integer | Fd := int(Fm) |
+| 0 | 1 | 0 | 0 | SQT | Square root | Fd := sqrt(Fm) |
+| 0 | 1 | 0 | 1 | LOG | Log base 10 | Fd := log10(Fm) |
+| 0 | 1 | 1 | 0 | LGN | Log base e | Fd := ln(Fm) |
+| 0 | 1 | 1 | 1 | EXP | Exponent | Fd := e ^ Fm |
+| 1 | 0 | 0 | 0 | SIN | Sine | Fd := sin(Fm) |
+| 1 | 0 | 0 | 1 | COS | Cosine | Fd := cos(Fm) |
+| 1 | 0 | 1 | 0 | TAN | Tangent | Fd := tan(Fm) |
+| 1 | 0 | 1 | 1 | ASN | Arc Sine | Fd := arcsin(Fm) |
+| 1 | 1 | 0 | 0 | ACS | Arc Cosine | Fd := arccos(Fm) |
+| 1 | 1 | 0 | 1 | ATN | Arc Tangent | Fd := arctan(Fm) |
+| 1 | 1 | 1 | 0 | URD | Unnormalized round | Fd := int(Fm) |
+| 1 | 1 | 1 | 1 | NRM | Normalize | Fd := norm(Fm) |
++---+---+---+---+----------+-----------------------+-----------------------+
+Note: LOG, LGN, EXP, SIN, COS, TAN, ASN, ACS, ATN are deprecated, and are
+ available for backwards compatibility only.
+*/
+
+/*
+TABLE 5
++-------------------------+---+---+
+| Rounding Precision | e | f |
++-------------------------+---+---+
+| IEEE Single precision | 0 ü 0 |
+| IEEE Double precision | 0 ü 1 |
+| IEEE Extended precision | 1 ü 0 |
+| undefined (trap) | 1 ü 1 |
++-------------------------+---+---+
+*/
+
+/*
+TABLE 5
++---------------------------------+---+---+
+| Rounding Mode | g | h |
++---------------------------------+---+---+
+| Round to nearest (default) | 0 ü 0 |
+| Round toward plus infinity | 0 ü 1 |
+| Round toward negative infinity | 1 ü 0 |
+| Round toward zero | 1 ü 1 |
++---------------------------------+---+---+
+*/
+
+/*
+===
+=== Definitions for load and store instructions
+===
+*/
+
+/* bit masks */
+#define BIT_PREINDEX 0x01000000
+#define BIT_UP 0x00800000
+#define BIT_WRITE_BACK 0x00200000
+#define BIT_LOAD 0x00100000
+
+/* masks for load/store */
+#define MASK_CPDT 0x0c000000 /* data processing opcode */
+#define MASK_OFFSET 0x000000ff
+#define MASK_TRANSFER_LENGTH 0x00408000
+#define MASK_REGISTER_COUNT MASK_TRANSFER_LENGTH
+#define MASK_COPROCESSOR 0x00000f00
+
+/* Tests for transfer length */
+#define TRANSFER_SINGLE 0x00000000
+#define TRANSFER_DOUBLE 0x00008000
+#define TRANSFER_EXTENDED 0x00400000
+#define TRANSFER_PACKED MASK_TRANSFER_LENGTH
+
+/* Get the coprocessor number from the opcode. */
+#define getCoprocessorNumber(opcode) ((opcode & MASK_COPROCESSOR) >> 8)
+
+/* Get the offset from the opcode. */
+#define getOffset(opcode) (opcode & MASK_OFFSET)
+
+/* Tests for specific data transfer load/store opcodes. */
+#define TEST_OPCODE(opcode,mask) (((opcode) & (mask)) == (mask))
+
+#define LOAD_OP(opcode) TEST_OPCODE((opcode),MASK_CPDT | BIT_LOAD)
+#define STORE_OP(opcode) ((opcode & (MASK_CPDT | BIT_LOAD)) == MASK_CPDT)
+
+#define LDF_OP(opcode) (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
+#define LFM_OP(opcode) (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 2))
+#define STF_OP(opcode) (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
+#define SFM_OP(opcode) (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 2))
+
+#define PREINDEXED(opcode) ((opcode & BIT_PREINDEX) != 0)
+#define POSTINDEXED(opcode) ((opcode & BIT_PREINDEX) == 0)
+#define BIT_UP_SET(opcode) ((opcode & BIT_UP) != 0)
+#define BIT_UP_CLEAR(opcode) ((opcode & BIT_DOWN) == 0)
+#define WRITE_BACK(opcode) ((opcode & BIT_WRITE_BACK) != 0)
+#define LOAD(opcode) ((opcode & BIT_LOAD) != 0)
+#define STORE(opcode) ((opcode & BIT_LOAD) == 0)
+
+/*
+===
+=== Definitions for arithmetic instructions
+===
+*/
+/* bit masks */
+#define BIT_MONADIC 0x00008000
+#define BIT_CONSTANT 0x00000008
+
+#define CONSTANT_FM(opcode) ((opcode & BIT_CONSTANT) != 0)
+#define MONADIC_INSTRUCTION(opcode) ((opcode & BIT_MONADIC) != 0)
+
+/* instruction identification masks */
+#define MASK_CPDO 0x0e000000 /* arithmetic opcode */
+#define MASK_ARITHMETIC_OPCODE 0x00f08000
+#define MASK_DESTINATION_SIZE 0x00080080
+
+/* dyadic arithmetic opcodes. */
+#define ADF_CODE 0x00000000
+#define MUF_CODE 0x00100000
+#define SUF_CODE 0x00200000
+#define RSF_CODE 0x00300000
+#define DVF_CODE 0x00400000
+#define RDF_CODE 0x00500000
+#define POW_CODE 0x00600000
+#define RPW_CODE 0x00700000
+#define RMF_CODE 0x00800000
+#define FML_CODE 0x00900000
+#define FDV_CODE 0x00a00000
+#define FRD_CODE 0x00b00000
+#define POL_CODE 0x00c00000
+/* 0x00d00000 is an invalid dyadic arithmetic opcode */
+/* 0x00e00000 is an invalid dyadic arithmetic opcode */
+/* 0x00f00000 is an invalid dyadic arithmetic opcode */
+
+/* monadic arithmetic opcodes. */
+#define MVF_CODE 0x00008000
+#define MNF_CODE 0x00108000
+#define ABS_CODE 0x00208000
+#define RND_CODE 0x00308000
+#define SQT_CODE 0x00408000
+#define LOG_CODE 0x00508000
+#define LGN_CODE 0x00608000
+#define EXP_CODE 0x00708000
+#define SIN_CODE 0x00808000
+#define COS_CODE 0x00908000
+#define TAN_CODE 0x00a08000
+#define ASN_CODE 0x00b08000
+#define ACS_CODE 0x00c08000
+#define ATN_CODE 0x00d08000
+#define URD_CODE 0x00e08000
+#define NRM_CODE 0x00f08000
+
+/*
+===
+=== Definitions for register transfer and comparison instructions
+===
+*/
+
+#define MASK_CPRT 0x0e000010 /* register transfer opcode */
+#define MASK_CPRT_CODE 0x00f00000
+#define FLT_CODE 0x00000000
+#define FIX_CODE 0x00100000
+#define WFS_CODE 0x00200000
+#define RFS_CODE 0x00300000
+#define WFC_CODE 0x00400000
+#define RFC_CODE 0x00500000
+#define CMF_CODE 0x00900000
+#define CNF_CODE 0x00b00000
+#define CMFE_CODE 0x00d00000
+#define CNFE_CODE 0x00f00000
+
+/*
+===
+=== Common definitions
+===
+*/
+
+/* register masks */
+#define MASK_Rd 0x0000f000
+#define MASK_Rn 0x000f0000
+#define MASK_Fd 0x00007000
+#define MASK_Fm 0x00000007
+#define MASK_Fn 0x00070000
+
+/* condition code masks */
+#define CC_MASK 0xf0000000
+#define CC_NEGATIVE 0x80000000
+#define CC_ZERO 0x40000000
+#define CC_CARRY 0x20000000
+#define CC_OVERFLOW 0x10000000
+#define CC_EQ 0x00000000
+#define CC_NE 0x10000000
+#define CC_CS 0x20000000
+#define CC_HS CC_CS
+#define CC_CC 0x30000000
+#define CC_LO CC_CC
+#define CC_MI 0x40000000
+#define CC_PL 0x50000000
+#define CC_VS 0x60000000
+#define CC_VC 0x70000000
+#define CC_HI 0x80000000
+#define CC_LS 0x90000000
+#define CC_GE 0xa0000000
+#define CC_LT 0xb0000000
+#define CC_GT 0xc0000000
+#define CC_LE 0xd0000000
+#define CC_AL 0xe0000000
+#define CC_NV 0xf0000000
+
+/* rounding masks/values */
+#define MASK_ROUNDING_MODE 0x00000060
+#define ROUND_TO_NEAREST 0x00000000
+#define ROUND_TO_PLUS_INFINITY 0x00000020
+#define ROUND_TO_MINUS_INFINITY 0x00000040
+#define ROUND_TO_ZERO 0x00000060
+
+#define MASK_ROUNDING_PRECISION 0x00080080
+#define ROUND_SINGLE 0x00000000
+#define ROUND_DOUBLE 0x00000080
+#define ROUND_EXTENDED 0x00080000
+
+/* Get the condition code from the opcode. */
+#define getCondition(opcode) (opcode >> 28)
+
+/* Get the source register from the opcode. */
+#define getRn(opcode) ((opcode & MASK_Rn) >> 16)
+
+/* Get the destination floating point register from the opcode. */
+#define getFd(opcode) ((opcode & MASK_Fd) >> 12)
+
+/* Get the first source floating point register from the opcode. */
+#define getFn(opcode) ((opcode & MASK_Fn) >> 16)
+
+/* Get the second source floating point register from the opcode. */
+#define getFm(opcode) (opcode & MASK_Fm)
+
+/* Get the destination register from the opcode. */
+#define getRd(opcode) ((opcode & MASK_Rd) >> 12)
+
+/* Get the rounding mode from the opcode. */
+#define getRoundingMode(opcode) ((opcode & MASK_ROUNDING_MODE) >> 5)
+
+#ifdef CONFIG_FPE_NWFPE_XP
+static inline const floatx80 getExtendedConstant(const unsigned int nIndex)
+{
+ extern const floatx80 floatx80Constant[];
+ return floatx80Constant[nIndex];
+}
+#endif
+
+static inline const float64 getDoubleConstant(const unsigned int nIndex)
+{
+ extern const float64 float64Constant[];
+ return float64Constant[nIndex];
+}
+
+static inline const float32 getSingleConstant(const unsigned int nIndex)
+{
+ extern const float32 float32Constant[];
+ return float32Constant[nIndex];
+}
+
+static inline unsigned int getTransferLength(const unsigned int opcode)
+{
+ unsigned int nRc;
+
+ switch (opcode & MASK_TRANSFER_LENGTH) {
+ case 0x00000000:
+ nRc = 1;
+ break; /* single precision */
+ case 0x00008000:
+ nRc = 2;
+ break; /* double precision */
+ case 0x00400000:
+ nRc = 3;
+ break; /* extended precision */
+ default:
+ nRc = 0;
+ }
+
+ return (nRc);
+}
+
+static inline unsigned int getRegisterCount(const unsigned int opcode)
+{
+ unsigned int nRc;
+
+ switch (opcode & MASK_REGISTER_COUNT) {
+ case 0x00000000:
+ nRc = 4;
+ break;
+ case 0x00008000:
+ nRc = 1;
+ break;
+ case 0x00400000:
+ nRc = 2;
+ break;
+ case 0x00408000:
+ nRc = 3;
+ break;
+ default:
+ nRc = 0;
+ }
+
+ return (nRc);
+}
+
+static inline unsigned int getRoundingPrecision(const unsigned int opcode)
+{
+ unsigned int nRc;
+
+ switch (opcode & MASK_ROUNDING_PRECISION) {
+ case 0x00000000:
+ nRc = 1;
+ break;
+ case 0x00000080:
+ nRc = 2;
+ break;
+ case 0x00080000:
+ nRc = 3;
+ break;
+ default:
+ nRc = 0;
+ }
+
+ return (nRc);
+}
+
+static inline unsigned int getDestinationSize(const unsigned int opcode)
+{
+ unsigned int nRc;
+
+ switch (opcode & MASK_DESTINATION_SIZE) {
+ case 0x00000000:
+ nRc = typeSingle;
+ break;
+ case 0x00000080:
+ nRc = typeDouble;
+ break;
+ case 0x00080000:
+ nRc = typeExtended;
+ break;
+ default:
+ nRc = typeNone;
+ }
+
+ return (nRc);
+}
+
+#endif