Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/arm/nwfpe/softfloat-specialize b/arch/arm/nwfpe/softfloat-specialize
new file mode 100644
index 0000000..acf4091
--- /dev/null
+++ b/arch/arm/nwfpe/softfloat-specialize
@@ -0,0 +1,366 @@
+
+/*
+===============================================================================
+
+This C source fragment is part of the SoftFloat IEC/IEEE Floating-point
+Arithmetic Package, Release 2.
+
+Written by John R. Hauser. This work was made possible in part by the
+International Computer Science Institute, located at Suite 600, 1947 Center
+Street, Berkeley, California 94704. Funding was partially provided by the
+National Science Foundation under grant MIP-9311980. The original version
+of this code was written as part of a project to build a fixed-point vector
+processor in collaboration with the University of California at Berkeley,
+overseen by Profs. Nelson Morgan and John Wawrzynek. More information
+is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
+arithmetic/softfloat.html'.
+
+THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort
+has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
+TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO
+PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
+AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
+
+Derivative works are acceptable, even for commercial purposes, so long as
+(1) they include prominent notice that the work is derivative, and (2) they
+include prominent notice akin to these three paragraphs for those parts of
+this code that are retained.
+
+===============================================================================
+*/
+
+/*
+-------------------------------------------------------------------------------
+Underflow tininess-detection mode, statically initialized to default value.
+(The declaration in `softfloat.h' must match the `int8' type here.)
+-------------------------------------------------------------------------------
+*/
+int8 float_detect_tininess = float_tininess_after_rounding;
+
+/*
+-------------------------------------------------------------------------------
+Raises the exceptions specified by `flags'. Floating-point traps can be
+defined here if desired. It is currently not possible for such a trap to
+substitute a result value. If traps are not implemented, this routine
+should be simply `float_exception_flags |= flags;'.
+
+ScottB: November 4, 1998
+Moved this function out of softfloat-specialize into fpmodule.c.
+This effectively isolates all the changes required for integrating with the
+Linux kernel into fpmodule.c. Porting to NetBSD should only require modifying
+fpmodule.c to integrate with the NetBSD kernel (I hope!).
+-------------------------------------------------------------------------------
+void float_raise( int8 flags )
+{
+ float_exception_flags |= flags;
+}
+*/
+
+/*
+-------------------------------------------------------------------------------
+Internal canonical NaN format.
+-------------------------------------------------------------------------------
+*/
+typedef struct {
+ flag sign;
+ bits64 high, low;
+} commonNaNT;
+
+/*
+-------------------------------------------------------------------------------
+The pattern for a default generated single-precision NaN.
+-------------------------------------------------------------------------------
+*/
+#define float32_default_nan 0xFFFFFFFF
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the single-precision floating-point value `a' is a NaN;
+otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag float32_is_nan( float32 a )
+{
+
+ return ( 0xFF000000 < (bits32) ( a<<1 ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the single-precision floating-point value `a' is a signaling
+NaN; otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag float32_is_signaling_nan( float32 a )
+{
+
+ return ( ( ( a>>22 ) & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the single-precision floating-point NaN
+`a' to the canonical NaN format. If `a' is a signaling NaN, the invalid
+exception is raised.
+-------------------------------------------------------------------------------
+*/
+static commonNaNT float32ToCommonNaN( float32 a )
+{
+ commonNaNT z;
+
+ if ( float32_is_signaling_nan( a ) ) float_raise( float_flag_invalid );
+ z.sign = a>>31;
+ z.low = 0;
+ z.high = ( (bits64) a )<<41;
+ return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the canonical NaN `a' to the single-
+precision floating-point format.
+-------------------------------------------------------------------------------
+*/
+static float32 commonNaNToFloat32( commonNaNT a )
+{
+
+ return ( ( (bits32) a.sign )<<31 ) | 0x7FC00000 | ( a.high>>41 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes two single-precision floating-point values `a' and `b', one of which
+is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a
+signaling NaN, the invalid exception is raised.
+-------------------------------------------------------------------------------
+*/
+static float32 propagateFloat32NaN( float32 a, float32 b )
+{
+ flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
+
+ aIsNaN = float32_is_nan( a );
+ aIsSignalingNaN = float32_is_signaling_nan( a );
+ bIsNaN = float32_is_nan( b );
+ bIsSignalingNaN = float32_is_signaling_nan( b );
+ a |= 0x00400000;
+ b |= 0x00400000;
+ if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid );
+ if ( aIsNaN ) {
+ return ( aIsSignalingNaN & bIsNaN ) ? b : a;
+ }
+ else {
+ return b;
+ }
+
+}
+
+/*
+-------------------------------------------------------------------------------
+The pattern for a default generated double-precision NaN.
+-------------------------------------------------------------------------------
+*/
+#define float64_default_nan LIT64( 0xFFFFFFFFFFFFFFFF )
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the double-precision floating-point value `a' is a NaN;
+otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag float64_is_nan( float64 a )
+{
+
+ return ( LIT64( 0xFFE0000000000000 ) < (bits64) ( a<<1 ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the double-precision floating-point value `a' is a signaling
+NaN; otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag float64_is_signaling_nan( float64 a )
+{
+
+ return
+ ( ( ( a>>51 ) & 0xFFF ) == 0xFFE )
+ && ( a & LIT64( 0x0007FFFFFFFFFFFF ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the double-precision floating-point NaN
+`a' to the canonical NaN format. If `a' is a signaling NaN, the invalid
+exception is raised.
+-------------------------------------------------------------------------------
+*/
+static commonNaNT float64ToCommonNaN( float64 a )
+{
+ commonNaNT z;
+
+ if ( float64_is_signaling_nan( a ) ) float_raise( float_flag_invalid );
+ z.sign = a>>63;
+ z.low = 0;
+ z.high = a<<12;
+ return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the canonical NaN `a' to the double-
+precision floating-point format.
+-------------------------------------------------------------------------------
+*/
+static float64 commonNaNToFloat64( commonNaNT a )
+{
+
+ return
+ ( ( (bits64) a.sign )<<63 )
+ | LIT64( 0x7FF8000000000000 )
+ | ( a.high>>12 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes two double-precision floating-point values `a' and `b', one of which
+is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a
+signaling NaN, the invalid exception is raised.
+-------------------------------------------------------------------------------
+*/
+static float64 propagateFloat64NaN( float64 a, float64 b )
+{
+ flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
+
+ aIsNaN = float64_is_nan( a );
+ aIsSignalingNaN = float64_is_signaling_nan( a );
+ bIsNaN = float64_is_nan( b );
+ bIsSignalingNaN = float64_is_signaling_nan( b );
+ a |= LIT64( 0x0008000000000000 );
+ b |= LIT64( 0x0008000000000000 );
+ if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid );
+ if ( aIsNaN ) {
+ return ( aIsSignalingNaN & bIsNaN ) ? b : a;
+ }
+ else {
+ return b;
+ }
+
+}
+
+#ifdef FLOATX80
+
+/*
+-------------------------------------------------------------------------------
+The pattern for a default generated extended double-precision NaN. The
+`high' and `low' values hold the most- and least-significant bits,
+respectively.
+-------------------------------------------------------------------------------
+*/
+#define floatx80_default_nan_high 0xFFFF
+#define floatx80_default_nan_low LIT64( 0xFFFFFFFFFFFFFFFF )
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the extended double-precision floating-point value `a' is a
+NaN; otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag floatx80_is_nan( floatx80 a )
+{
+
+ return ( ( a.high & 0x7FFF ) == 0x7FFF ) && (bits64) ( a.low<<1 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the extended double-precision floating-point value `a' is a
+signaling NaN; otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag floatx80_is_signaling_nan( floatx80 a )
+{
+ //register int lr;
+ bits64 aLow;
+
+ //__asm__("mov %0, lr" : : "g" (lr));
+ //fp_printk("floatx80_is_signalling_nan() called from 0x%08x\n",lr);
+ aLow = a.low & ~ LIT64( 0x4000000000000000 );
+ return
+ ( ( a.high & 0x7FFF ) == 0x7FFF )
+ && (bits64) ( aLow<<1 )
+ && ( a.low == aLow );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the extended double-precision floating-
+point NaN `a' to the canonical NaN format. If `a' is a signaling NaN, the
+invalid exception is raised.
+-------------------------------------------------------------------------------
+*/
+static commonNaNT floatx80ToCommonNaN( floatx80 a )
+{
+ commonNaNT z;
+
+ if ( floatx80_is_signaling_nan( a ) ) float_raise( float_flag_invalid );
+ z.sign = a.high>>15;
+ z.low = 0;
+ z.high = a.low<<1;
+ return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the canonical NaN `a' to the extended
+double-precision floating-point format.
+-------------------------------------------------------------------------------
+*/
+static floatx80 commonNaNToFloatx80( commonNaNT a )
+{
+ floatx80 z;
+
+ z.low = LIT64( 0xC000000000000000 ) | ( a.high>>1 );
+ z.high = ( ( (bits16) a.sign )<<15 ) | 0x7FFF;
+ return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes two extended double-precision floating-point values `a' and `b', one
+of which is a NaN, and returns the appropriate NaN result. If either `a' or
+`b' is a signaling NaN, the invalid exception is raised.
+-------------------------------------------------------------------------------
+*/
+static floatx80 propagateFloatx80NaN( floatx80 a, floatx80 b )
+{
+ flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
+
+ aIsNaN = floatx80_is_nan( a );
+ aIsSignalingNaN = floatx80_is_signaling_nan( a );
+ bIsNaN = floatx80_is_nan( b );
+ bIsSignalingNaN = floatx80_is_signaling_nan( b );
+ a.low |= LIT64( 0xC000000000000000 );
+ b.low |= LIT64( 0xC000000000000000 );
+ if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid );
+ if ( aIsNaN ) {
+ return ( aIsSignalingNaN & bIsNaN ) ? b : a;
+ }
+ else {
+ return b;
+ }
+
+}
+
+#endif