Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
new file mode 100644
index 0000000..3aeedd2
--- /dev/null
+++ b/arch/arm/vfp/vfpmodule.c
@@ -0,0 +1,288 @@
+/*
+ * linux/arch/arm/vfp/vfpmodule.c
+ *
+ * Copyright (C) 2004 ARM Limited.
+ * Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/vfp.h>
+
+#include "vfpinstr.h"
+#include "vfp.h"
+
+/*
+ * Our undef handlers (in entry.S)
+ */
+void vfp_testing_entry(void);
+void vfp_support_entry(void);
+
+void (*vfp_vector)(void) = vfp_testing_entry;
+union vfp_state *last_VFP_context;
+
+/*
+ * Dual-use variable.
+ * Used in startup: set to non-zero if VFP checks fail
+ * After startup, holds VFP architecture
+ */
+unsigned int VFP_arch;
+
+/*
+ * Per-thread VFP initialisation.
+ */
+void vfp_flush_thread(union vfp_state *vfp)
+{
+ memset(vfp, 0, sizeof(union vfp_state));
+
+ vfp->hard.fpexc = FPEXC_ENABLE;
+ vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
+
+ /*
+ * Disable VFP to ensure we initialise it first.
+ */
+ fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE);
+
+ /*
+ * Ensure we don't try to overwrite our newly initialised
+ * state information on the first fault.
+ */
+ if (last_VFP_context == vfp)
+ last_VFP_context = NULL;
+}
+
+/*
+ * Per-thread VFP cleanup.
+ */
+void vfp_release_thread(union vfp_state *vfp)
+{
+ if (last_VFP_context == vfp)
+ last_VFP_context = NULL;
+}
+
+/*
+ * Raise a SIGFPE for the current process.
+ * sicode describes the signal being raised.
+ */
+void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
+{
+ siginfo_t info;
+
+ memset(&info, 0, sizeof(info));
+
+ info.si_signo = SIGFPE;
+ info.si_code = sicode;
+ info.si_addr = (void *)(instruction_pointer(regs) - 4);
+
+ /*
+ * This is the same as NWFPE, because it's not clear what
+ * this is used for
+ */
+ current->thread.error_code = 0;
+ current->thread.trap_no = 6;
+
+ force_sig_info(SIGFPE, &info, current);
+}
+
+static void vfp_panic(char *reason)
+{
+ int i;
+
+ printk(KERN_ERR "VFP: Error: %s\n", reason);
+ printk(KERN_ERR "VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n",
+ fmrx(FPEXC), fmrx(FPSCR), fmrx(FPINST));
+ for (i = 0; i < 32; i += 2)
+ printk(KERN_ERR "VFP: s%2u: 0x%08x s%2u: 0x%08x\n",
+ i, vfp_get_float(i), i+1, vfp_get_float(i+1));
+}
+
+/*
+ * Process bitmask of exception conditions.
+ */
+static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_regs *regs)
+{
+ int si_code = 0;
+
+ pr_debug("VFP: raising exceptions %08x\n", exceptions);
+
+ if (exceptions == (u32)-1) {
+ vfp_panic("unhandled bounce");
+ vfp_raise_sigfpe(0, regs);
+ return;
+ }
+
+ /*
+ * If any of the status flags are set, update the FPSCR.
+ * Comparison instructions always return at least one of
+ * these flags set.
+ */
+ if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
+ fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
+
+ fpscr |= exceptions;
+
+ fmxr(FPSCR, fpscr);
+
+#define RAISE(stat,en,sig) \
+ if (exceptions & stat && fpscr & en) \
+ si_code = sig;
+
+ /*
+ * These are arranged in priority order, least to highest.
+ */
+ RAISE(FPSCR_IXC, FPSCR_IXE, FPE_FLTRES);
+ RAISE(FPSCR_UFC, FPSCR_UFE, FPE_FLTUND);
+ RAISE(FPSCR_OFC, FPSCR_OFE, FPE_FLTOVF);
+ RAISE(FPSCR_IOC, FPSCR_IOE, FPE_FLTINV);
+
+ if (si_code)
+ vfp_raise_sigfpe(si_code, regs);
+}
+
+/*
+ * Emulate a VFP instruction.
+ */
+static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs)
+{
+ u32 exceptions = (u32)-1;
+
+ pr_debug("VFP: emulate: INST=0x%08x SCR=0x%08x\n", inst, fpscr);
+
+ if (INST_CPRTDO(inst)) {
+ if (!INST_CPRT(inst)) {
+ /*
+ * CPDO
+ */
+ if (vfp_single(inst)) {
+ exceptions = vfp_single_cpdo(inst, fpscr);
+ } else {
+ exceptions = vfp_double_cpdo(inst, fpscr);
+ }
+ } else {
+ /*
+ * A CPRT instruction can not appear in FPINST2, nor
+ * can it cause an exception. Therefore, we do not
+ * have to emulate it.
+ */
+ }
+ } else {
+ /*
+ * A CPDT instruction can not appear in FPINST2, nor can
+ * it cause an exception. Therefore, we do not have to
+ * emulate it.
+ */
+ }
+ return exceptions;
+}
+
+/*
+ * Package up a bounce condition.
+ */
+void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
+{
+ u32 fpscr, orig_fpscr, exceptions, inst;
+
+ pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc);
+
+ /*
+ * Enable access to the VFP so we can handle the bounce.
+ */
+ fmxr(FPEXC, fpexc & ~(FPEXC_EXCEPTION|FPEXC_INV|FPEXC_UFC|FPEXC_IOC));
+
+ orig_fpscr = fpscr = fmrx(FPSCR);
+
+ /*
+ * If we are running with inexact exceptions enabled, we need to
+ * emulate the trigger instruction. Note that as we're emulating
+ * the trigger instruction, we need to increment PC.
+ */
+ if (fpscr & FPSCR_IXE) {
+ regs->ARM_pc += 4;
+ goto emulate;
+ }
+
+ barrier();
+
+ /*
+ * Modify fpscr to indicate the number of iterations remaining
+ */
+ if (fpexc & FPEXC_EXCEPTION) {
+ u32 len;
+
+ len = fpexc + (1 << FPEXC_LENGTH_BIT);
+
+ fpscr &= ~FPSCR_LENGTH_MASK;
+ fpscr |= (len & FPEXC_LENGTH_MASK) << (FPSCR_LENGTH_BIT - FPEXC_LENGTH_BIT);
+ }
+
+ /*
+ * Handle the first FP instruction. We used to take note of the
+ * FPEXC bounce reason, but this appears to be unreliable.
+ * Emulate the bounced instruction instead.
+ */
+ inst = fmrx(FPINST);
+ exceptions = vfp_emulate_instruction(inst, fpscr, regs);
+ if (exceptions)
+ vfp_raise_exceptions(exceptions, inst, orig_fpscr, regs);
+
+ /*
+ * If there isn't a second FP instruction, exit now.
+ */
+ if (!(fpexc & FPEXC_FPV2))
+ return;
+
+ /*
+ * The barrier() here prevents fpinst2 being read
+ * before the condition above.
+ */
+ barrier();
+ trigger = fmrx(FPINST2);
+ fpscr = fmrx(FPSCR);
+
+ emulate:
+ exceptions = vfp_emulate_instruction(trigger, fpscr, regs);
+ if (exceptions)
+ vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
+}
+
+/*
+ * VFP support code initialisation.
+ */
+static int __init vfp_init(void)
+{
+ unsigned int vfpsid;
+
+ /*
+ * First check that there is a VFP that we can use.
+ * The handler is already setup to just log calls, so
+ * we just need to read the VFPSID register.
+ */
+ vfpsid = fmrx(FPSID);
+
+ printk(KERN_INFO "VFP support v0.3: ");
+ if (VFP_arch) {
+ printk("not present\n");
+ } else if (vfpsid & FPSID_NODOUBLE) {
+ printk("no double precision support\n");
+ } else {
+ VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT; /* Extract the architecture version */
+ printk("implementor %02x architecture %d part %02x variant %x rev %x\n",
+ (vfpsid & FPSID_IMPLEMENTER_MASK) >> FPSID_IMPLEMENTER_BIT,
+ (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT,
+ (vfpsid & FPSID_PART_MASK) >> FPSID_PART_BIT,
+ (vfpsid & FPSID_VARIANT_MASK) >> FPSID_VARIANT_BIT,
+ (vfpsid & FPSID_REV_MASK) >> FPSID_REV_BIT);
+ vfp_vector = vfp_support_entry;
+ }
+ return 0;
+}
+
+late_initcall(vfp_init);