Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/i386/oprofile/op_model_ppro.c b/arch/i386/oprofile/op_model_ppro.c
new file mode 100644
index 0000000..d719015
--- /dev/null
+++ b/arch/i386/oprofile/op_model_ppro.c
@@ -0,0 +1,143 @@
+/**
+ * @file op_model_ppro.h
+ * pentium pro / P6 model-specific MSR operations
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author John Levon
+ * @author Philippe Elie
+ * @author Graydon Hoare
+ */
+
+#include <linux/oprofile.h>
+#include <asm/ptrace.h>
+#include <asm/msr.h>
+#include <asm/apic.h>
+
+#include "op_x86_model.h"
+#include "op_counter.h"
+
+#define NUM_COUNTERS 2
+#define NUM_CONTROLS 2
+
+#define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0)
+#define CTR_WRITE(l,msrs,c) do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), -1);} while (0)
+#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
+
+#define CTRL_READ(l,h,msrs,c) do {rdmsr((msrs->controls[(c)].addr), (l), (h));} while (0)
+#define CTRL_WRITE(l,h,msrs,c) do {wrmsr((msrs->controls[(c)].addr), (l), (h));} while (0)
+#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
+#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
+#define CTRL_CLEAR(x) (x &= (1<<21))
+#define CTRL_SET_ENABLE(val) (val |= 1<<20)
+#define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16))
+#define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17))
+#define CTRL_SET_UM(val, m) (val |= (m << 8))
+#define CTRL_SET_EVENT(val, e) (val |= e)
+
+static unsigned long reset_value[NUM_COUNTERS];
+
+static void ppro_fill_in_addresses(struct op_msrs * const msrs)
+{
+ msrs->counters[0].addr = MSR_P6_PERFCTR0;
+ msrs->counters[1].addr = MSR_P6_PERFCTR1;
+
+ msrs->controls[0].addr = MSR_P6_EVNTSEL0;
+ msrs->controls[1].addr = MSR_P6_EVNTSEL1;
+}
+
+
+static void ppro_setup_ctrs(struct op_msrs const * const msrs)
+{
+ unsigned int low, high;
+ int i;
+
+ /* clear all counters */
+ for (i = 0 ; i < NUM_CONTROLS; ++i) {
+ CTRL_READ(low, high, msrs, i);
+ CTRL_CLEAR(low);
+ CTRL_WRITE(low, high, msrs, i);
+ }
+
+ /* avoid a false detection of ctr overflows in NMI handler */
+ for (i = 0; i < NUM_COUNTERS; ++i) {
+ CTR_WRITE(1, msrs, i);
+ }
+
+ /* enable active counters */
+ for (i = 0; i < NUM_COUNTERS; ++i) {
+ if (counter_config[i].enabled) {
+ reset_value[i] = counter_config[i].count;
+
+ CTR_WRITE(counter_config[i].count, msrs, i);
+
+ CTRL_READ(low, high, msrs, i);
+ CTRL_CLEAR(low);
+ CTRL_SET_ENABLE(low);
+ CTRL_SET_USR(low, counter_config[i].user);
+ CTRL_SET_KERN(low, counter_config[i].kernel);
+ CTRL_SET_UM(low, counter_config[i].unit_mask);
+ CTRL_SET_EVENT(low, counter_config[i].event);
+ CTRL_WRITE(low, high, msrs, i);
+ }
+ }
+}
+
+
+static int ppro_check_ctrs(struct pt_regs * const regs,
+ struct op_msrs const * const msrs)
+{
+ unsigned int low, high;
+ int i;
+
+ for (i = 0 ; i < NUM_COUNTERS; ++i) {
+ CTR_READ(low, high, msrs, i);
+ if (CTR_OVERFLOWED(low)) {
+ oprofile_add_sample(regs, i);
+ CTR_WRITE(reset_value[i], msrs, i);
+ }
+ }
+
+ /* Only P6 based Pentium M need to re-unmask the apic vector but it
+ * doesn't hurt other P6 variant */
+ apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
+
+ /* We can't work out if we really handled an interrupt. We
+ * might have caught a *second* counter just after overflowing
+ * the interrupt for this counter then arrives
+ * and we don't find a counter that's overflowed, so we
+ * would return 0 and get dazed + confused. Instead we always
+ * assume we found an overflow. This sucks.
+ */
+ return 1;
+}
+
+
+static void ppro_start(struct op_msrs const * const msrs)
+{
+ unsigned int low,high;
+ CTRL_READ(low, high, msrs, 0);
+ CTRL_SET_ACTIVE(low);
+ CTRL_WRITE(low, high, msrs, 0);
+}
+
+
+static void ppro_stop(struct op_msrs const * const msrs)
+{
+ unsigned int low,high;
+ CTRL_READ(low, high, msrs, 0);
+ CTRL_SET_INACTIVE(low);
+ CTRL_WRITE(low, high, msrs, 0);
+}
+
+
+struct op_x86_model_spec const op_ppro_spec = {
+ .num_counters = NUM_COUNTERS,
+ .num_controls = NUM_CONTROLS,
+ .fill_in_addresses = &ppro_fill_in_addresses,
+ .setup_ctrs = &ppro_setup_ctrs,
+ .check_ctrs = &ppro_check_ctrs,
+ .start = &ppro_start,
+ .stop = &ppro_stop
+};