diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
new file mode 100644
index 0000000..0d90ea5
--- /dev/null
+++ b/arch/m32r/Kconfig
@@ -0,0 +1,367 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux/M32R Kernel Configuration"
+
+config M32R
+	bool
+	default y
+
+config SBUS
+	bool
+
+config UID16
+	bool
+	default n
+
+config GENERIC_ISA_DMA
+	bool
+	default y
+
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config GENERIC_IRQ_PROBE
+	bool
+	default y
+
+source "init/Kconfig"
+
+
+menu "Processor type and features"
+
+choice
+	prompt "Platform Type"
+	default PLAT_MAPPI
+
+config PLAT_MAPPI
+	bool "Mappi-I"
+	help
+	  The Mappi-I is an FPGA board for SOC (System-On-a-Chip) prototyping.
+	  You can operate a Linux system on this board by using an M32R
+	  softmacro core, which is a fully-synthesizable functional model
+	  described in Verilog-HDL.
+
+	  The Mappi-I board was the first platform, which had been used
+	  to port and develop a Linux system for the M32R processor.
+	  Currently, the Mappi-II, an heir to the Mappi-I, is available.
+
+config PLAT_USRV
+	bool "uServer"
+
+config PLAT_M32700UT
+	bool "M32700UT"
+	help
+	  The M3T-M32700UT is an evaluation board based on uT-Engine
+	  specification.  This board has an M32700 (Chaos) evaluation chip.
+	  You can say Y for SMP, because the M32700 is a single chip
+	  multiprocessor.
+
+config PLAT_OPSPUT
+	bool "OPSPUT"
+	help
+	  The OPSPUT is an evaluation board based on uT-Engine
+	  specification.  This board has a OPSP-REP chip.
+
+config PLAT_OAKS32R
+	bool "OAKS32R"
+	help
+	  The OAKS32R is a tiny, inexpensive evaluation board.
+	  Please note that if you say Y here and choose chip "M32102",
+	  say N for MMU and select a no-MMU version kernel, otherwise
+	  a kernel with MMU support will not work, because the M32102
+	  is a microcontroller for embedded systems and it has no MMU.
+
+config PLAT_MAPPI2
+       bool "Mappi-II(M3A-ZA36/M3A-ZA52)"
+
+endchoice
+
+choice
+	prompt "Processor family"
+	default CHIP_M32700
+
+config CHIP_M32700
+	bool "M32700 (Chaos)"
+
+config CHIP_M32102
+	bool "M32102"
+
+config CHIP_VDEC2
+       bool "VDEC2"
+
+config CHIP_OPSP
+       bool "OPSP"
+
+endchoice
+
+config MMU
+	bool "Support for memory management hardware"
+	depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
+	default y
+
+config TLB_ENTRIES
+       int "TLB Entries"
+       depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
+       default 32 if CHIP_M32700 || CHIP_OPSP
+       default 16 if CHIP_VDEC2
+
+
+config ISA_M32R
+        bool
+	depends on CHIP_M32102
+	default y
+
+config ISA_M32R2
+	bool
+	depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
+	default y
+
+config ISA_DSP_LEVEL2
+	bool
+	depends on CHIP_M32700 || CHIP_OPSP
+	default y
+
+config ISA_DUAL_ISSUE
+	bool
+	depends on CHIP_M32700 || CHIP_OPSP
+	default y
+
+config BUS_CLOCK
+	int "Bus Clock [Hz] (integer)"
+	default "70000000" if PLAT_MAPPI
+	default "25000000" if PLAT_USRV
+	default "50000000" if PLAT_M32700UT
+	default "50000000" if PLAT_OPSPUT
+	default "33333333" if PLAT_OAKS32R
+	default "20000000" if PLAT_MAPPI2
+
+config TIMER_DIVIDE
+	int "Timer divider (integer)"
+	default "128"
+
+config CPU_LITTLE_ENDIAN
+        bool "Generate little endian code"
+	default n
+
+config MEMORY_START
+	hex "Physical memory start address (hex)"
+	default "08000000" if PLAT_MAPPI || PLAT_MAPPI2
+	default "08000000" if PLAT_USRV
+	default "08000000" if PLAT_M32700UT
+	default "08000000" if PLAT_OPSPUT
+	default "01000000" if PLAT_OAKS32R
+
+config MEMORY_SIZE
+	hex "Physical memory size (hex)"
+	default "04000000" if PLAT_MAPPI || PLAT_MAPPI2
+	default "02000000" if PLAT_USRV
+	default "01000000" if PLAT_M32700UT
+	default "01000000" if PLAT_OPSPUT
+	default "00800000" if PLAT_OAKS32R
+
+config NOHIGHMEM
+	bool
+	default y
+
+config DISCONTIGMEM
+	bool "Internal RAM Support"
+	depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP
+	default y
+
+config IRAM_START
+	hex "Internal memory start address (hex)"
+	default "00f00000"
+	depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP) && DISCONTIGMEM
+
+config IRAM_SIZE
+	hex "Internal memory size (hex)"
+	depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP) && DISCONTIGMEM
+	default "00080000" if CHIP_M32700
+	default "00010000" if CHIP_M32102 || CHIP_OPSP
+	default "00008000" if CHIP_VDEC2
+
+#
+# Define implied options from the CPU selection here
+#
+
+config RWSEM_GENERIC_SPINLOCK
+	bool
+	depends on M32R
+	default y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+	default n
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config PREEMPT
+	bool "Preemptible Kernel"
+	help
+	  This option reduces the latency of the kernel when reacting to
+	  real-time or interactive events by allowing a low priority process to
+	  be preempted even if it is in kernel mode executing a system call.
+	  This allows applications to run more reliably even when the system is
+	  under load.
+
+	  Say Y here if you are building a kernel for a desktop, embedded
+	  or real-time system.  Say N if you are unsure.
+
+config HAVE_DEC_LOCK
+	bool
+	depends on (SMP || PREEMPT)
+	default n
+
+config SMP
+	bool "Symmetric multi-processing support"
+	---help---
+	  This enables support for systems with more than one CPU. If you have
+	  a system with only one CPU, like most personal computers, say N. If
+	  you have a system with more than one CPU, say Y.
+
+	  If you say N here, the kernel will run on single and multiprocessor
+	  machines, but will use only one CPU of a multiprocessor machine. If
+	  you say Y here, the kernel will run on many, but not all,
+	  singleprocessor machines. On a singleprocessor machine, the kernel
+	  will run faster if you say N here.
+
+	  People using multiprocessor machines who say Y here should also say
+	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+	  Management" code will be disabled if you say Y here.
+
+	  See also the <file:Documentation/smp.tex>,
+	  <file:Documentation/smp.txt> and the SMP-HOWTO available at
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  If you don't know what to do here, say N.
+
+config CHIP_M32700_TS1
+	bool "Workaround code for the M32700 TS1 chip's bug"
+	depends on (CHIP_M32700 && SMP)
+	default n
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-32)"
+	range 2 32
+	depends on SMP
+	default "2"
+	help
+	  This allows you to specify the maximum number of CPUs which this
+	  kernel will support.  The maximum supported value is 32 and the
+	  minimum value which makes sense is 2.
+
+	  This is purely to save memory - each supported CPU adds
+	  approximately eight kilobytes to the kernel image.
+
+# Common NUMA Features
+config NUMA
+	bool "Numa Memory Allocation Support"
+	depends on SMP
+	default n
+
+# turning this on wastes a bunch of space.
+# Summit needs it only when NUMA is on
+config BOOT_IOREMAP
+	bool
+	depends on NUMA
+	default n
+
+endmenu
+
+
+menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
+
+config PCI
+	bool "PCI support"
+	default n
+	help
+	  Find out whether you have a PCI motherboard. PCI is the name of a
+	  bus system, i.e. the way the CPU talks to the other stuff inside
+	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+	  VESA. If you have PCI, say Y, otherwise N.
+
+	  The PCI-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+	  information about which PCI hardware does work under Linux and which
+	  doesn't.
+
+choice
+	prompt "PCI access mode"
+	depends on PCI
+	default PCI_GOANY
+
+config PCI_GOBIOS
+	bool "BIOS"
+	---help---
+	  On PCI systems, the BIOS can be used to detect the PCI devices and
+	  determine their configuration. However, some old PCI motherboards
+	  have BIOS bugs and may crash if this is done. Also, some embedded
+	  PCI-based systems don't have any BIOS at all. Linux can also try to
+	  detect the PCI hardware directly without using the BIOS.
+
+	  With this option, you can specify how Linux should detect the PCI
+	  devices. If you choose "BIOS", the BIOS will be used, if you choose
+	  "Direct", the BIOS won't be used, and if you choose "Any", the
+	  kernel will try the direct access method and falls back to the BIOS
+	  if that doesn't work. If unsure, go with the default, which is
+	  "Any".
+
+config PCI_GODIRECT
+	bool "Direct"
+
+config PCI_GOANY
+	bool "Any"
+
+endchoice
+
+config PCI_BIOS
+	bool
+	depends on PCI && (PCI_GOBIOS || PCI_GOANY)
+	default y
+
+config PCI_DIRECT
+	bool
+ 	depends on PCI && (PCI_GODIRECT || PCI_GOANY)
+	default y
+
+source "drivers/pci/Kconfig"
+
+config ISA
+	bool "ISA support"
+	help
+	  Find out whether you have ISA slots on your motherboard.  ISA is the
+	  name of a bus system, i.e. the way the CPU talks to the other stuff
+	  inside your box.  If you have ISA, say Y, otherwise N.
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/m32r/oprofile/Kconfig"
+
+source "arch/m32r/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/m32r/Kconfig.debug b/arch/m32r/Kconfig.debug
new file mode 100644
index 0000000..36788c2
--- /dev/null
+++ b/arch/m32r/Kconfig.debug
@@ -0,0 +1,34 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config DEBUG_STACKOVERFLOW
+	bool "Check for stack overflows"
+	depends on DEBUG_KERNEL
+
+config DEBUG_STACK_USAGE
+	bool "Stack utilization instrumentation"
+	depends on DEBUG_KERNEL
+	help
+	  Enables the display of the minimum amount of free stack which each
+	  task has ever had available in the sysrq-T and sysrq-P debug output.
+
+	  This option will slow down process creation somewhat.
+
+config DEBUG_PAGEALLOC
+	bool "Page alloc debugging"
+	depends on DEBUG_KERNEL
+	help
+	  Unmap pages from the kernel linear mapping after free_pages().
+	  This results in a large slowdown, but helps to find certain types
+	  of memory corruptions.
+
+config FRAME_POINTER
+	bool "Compile the kernel with frame pointers"
+	help
+	  If you say Y here the resulting kernel image will be slightly larger
+	  and slower, but it will give very useful debugging information.
+	  If you don't debug the kernel, you can say N, but we may not be able
+	  to solve problems without frame pointers.
+
+endmenu
diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile
new file mode 100644
index 0000000..dd4418d
--- /dev/null
+++ b/arch/m32r/Makefile
@@ -0,0 +1,56 @@
+#
+# m32r/Makefile
+#
+
+LDFLAGS		:=
+OBJCOPYFLAGS	:= -O binary -R .note -R .comment -S
+LDFLAGS_vmlinux	:= -e startup_32
+
+CFLAGS += -pipe -fno-schedule-insns
+CFLAGS_KERNEL += -mmodel=medium
+CFLAGS_MODULE += -mmodel=large
+
+ifdef CONFIG_CHIP_VDEC2
+cflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -Wa,-bitinst
+aflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -Wa,-bitinst
+else
+cflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -m32r2
+aflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -m32r2
+endif
+
+cflags-$(CONFIG_ISA_M32R)	+= -DNO_FPU
+aflags-$(CONFIG_ISA_M32R)	+= -DNO_FPU -Wa,-no-bitinst
+
+CFLAGS += $(cflags-y)
+AFLAGS += $(aflags-y)
+
+CHECKFLAGS	:= $(CHECK) -D__m32r__
+
+head-y	:= arch/m32r/kernel/head.o arch/m32r/kernel/init_task.o
+
+LIBGCC	:= $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+
+libs-y	+= arch/m32r/lib/ $(LIBGCC)
+core-y	+= arch/m32r/kernel/	\
+	   arch/m32r/mm/	\
+	   arch/m32r/boot/
+
+drivers-$(CONFIG_OPROFILE)	+= arch/m32r/oprofile/
+
+boot := arch/m32r/boot
+
+.PHONY: zImage
+
+all: zImage
+
+zImage: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+compressed: zImage
+
+archclean:
+	$(Q)$(MAKE) $(clean)=$(boot)
+
+define archhelp
+	echo  '* zImage          - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
+endef
diff --git a/arch/m32r/boot/Makefile b/arch/m32r/boot/Makefile
new file mode 100644
index 0000000..af2cef4
--- /dev/null
+++ b/arch/m32r/boot/Makefile
@@ -0,0 +1,19 @@
+#
+# arch/m32r/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+
+targets := zImage
+subdir- := compressed
+
+obj-y	:= setup.o
+
+$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo 'Kernel: $@ is ready'
+
+$(obj)/compressed/vmlinux: FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile
new file mode 100644
index 0000000..d908e1d
--- /dev/null
+++ b/arch/m32r/boot/compressed/Makefile
@@ -0,0 +1,42 @@
+#
+# linux/arch/sh/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \
+		   piggy.o vmlinux.lds
+EXTRA_AFLAGS	:= -traditional
+
+OBJECTS = $(obj)/head.o $(obj)/misc.o
+
+#
+# IMAGE_OFFSET is the load offset of the compression loader
+#
+#IMAGE_OFFSET := $(shell printf "0x%08x" $$[$(CONFIG_MEMORY_START)+0x2000])
+#IMAGE_OFFSET := $(shell printf "0x%08x" $$[$(CONFIG_MEMORY_START)+0x00400000])
+
+LDFLAGS_vmlinux := -T
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(OBJECTS) $(obj)/piggy.o FORCE
+	$(call if_changed,ld)
+	@:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,gzip)
+
+CFLAGS_misc.o += -fpic
+
+ifdef CONFIG_MMU
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-m32r-linux -T
+else
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-m32r -T
+endif
+
+OBJCOPYFLAGS += -R .empty_zero_page
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,ld)
diff --git a/arch/m32r/boot/compressed/boot.h b/arch/m32r/boot/compressed/boot.h
new file mode 100644
index 0000000..9272e38
--- /dev/null
+++ b/arch/m32r/boot/compressed/boot.h
@@ -0,0 +1,59 @@
+/*
+ * 1. load vmlinuz
+ *
+ * CONFIG_MEMORY_START  	+-----------------------+
+ *				|        vmlinuz	|
+ *				+-----------------------+
+ * 2. decompressed
+ *
+ * CONFIG_MEMORY_START  	+-----------------------+
+ *				|        vmlinuz	|
+ *				+-----------------------+
+ *				|			|
+ * BOOT_RELOC_ADDR		+-----------------------+
+ *				|		 	|
+ * KERNEL_DECOMPRESS_ADDR 	+-----------------------+
+ *				|  	vmlinux		|
+ *				+-----------------------+
+ *
+ * 3. relocate copy & jump code
+ *
+ * CONFIG_MEMORY_START  	+-----------------------+
+ *				|        vmlinuz	|
+ *				+-----------------------+
+ *				|			|
+ * BOOT_RELOC_ADDR		+-----------------------+
+ *				|    boot(copy&jump)	|
+ * KERNEL_DECOMPRESS_ADDR 	+-----------------------+
+ *				|  	vmlinux		|
+ *				+-----------------------+
+ *
+ * 4. relocate decompressed kernel
+ *
+ * CONFIG_MEMORY_START  	+-----------------------+
+ *				|        vmlinux	|
+ *				+-----------------------+
+ *				|			|
+ * BOOT_RELOC_ADDR		+-----------------------+
+ *				|     boot(copy&jump) 	|
+ * KERNEL_DECOMPRESS_ADDR 	+-----------------------+
+ *				|  			|
+ *				+-----------------------+
+ *
+ */
+#ifdef __ASSEMBLY__
+#define __val(x)	x
+#else
+#define __val(x)	(x)
+#endif
+
+#define DECOMPRESS_OFFSET_BASE	__val(0x00900000)
+#define BOOT_RELOC_SIZE		__val(0x00001000)
+
+#define KERNEL_EXEC_ADDR	__val(CONFIG_MEMORY_START)
+#define KERNEL_DECOMPRESS_ADDR	__val(CONFIG_MEMORY_START + \
+				      DECOMPRESS_OFFSET_BASE + BOOT_RELOC_SIZE)
+#define KERNEL_ENTRY		__val(CONFIG_MEMORY_START + 0x1000)
+
+#define BOOT_EXEC_ADDR		__val(CONFIG_MEMORY_START)
+#define BOOT_RELOC_ADDR		__val(CONFIG_MEMORY_START + DECOMPRESS_OFFSET_BASE)
diff --git a/arch/m32r/boot/compressed/head.S b/arch/m32r/boot/compressed/head.S
new file mode 100644
index 0000000..07cfd6a
--- /dev/null
+++ b/arch/m32r/boot/compressed/head.S
@@ -0,0 +1,172 @@
+/*
+ *  linux/arch/m32r/boot/compressed/head.S
+ *
+ *  Copyright (c) 2001-2003	Hiroyuki Kondo, Hirokazu Takata,
+ *				Hitoshi Yamamoto, Takeo Takahashi
+ *  Copyright (c) 2004		Hirokazu Takata
+ */
+
+	.text
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/addrspace.h>
+#include <asm/page.h>
+#include <asm/assembler.h>
+
+	/*
+	 * This code can be loaded anywhere, as long as output will not
+	 * overlap it.
+	 *
+	 * NOTE: This head.S should *NOT* be compiled with -fpic.
+	 *
+	 */
+
+	.global	startup
+	.global __bss_start, _ebss, end, zimage_data, zimage_len
+	__ALIGN
+startup:
+	ldi	r0, #0x0000			/* SPI, disable EI */
+	mvtc	r0, psw
+
+	ldi	r12, #-8
+	bl	1f
+	.fillinsn
+1:
+	seth	r1, #high(CONFIG_MEMORY_START + 0x00400000) /* Start address */
+	add	r12, r14				/* Real address */
+	sub	r12, r1					/* difference */
+
+	.global got_len
+	seth	r3, #high(_GLOBAL_OFFSET_TABLE_+8)
+	or3	r3, r3, #low(_GLOBAL_OFFSET_TABLE_+12)
+	add	r3, r14
+
+	/* Update the contents of global offset table */
+	ldi	r1, #low(got_len)
+	srli	r1, #2
+	beqz	r1, 2f
+	.fillinsn
+1:
+	ld	r2, @r3
+	add	r2, r12
+	st	r2, @r3
+	addi	r3, #4
+	addi	r1, #-1
+	bnez	r1, 1b
+	.fillinsn
+2:
+	/* XXX: resolve plt */
+
+/*
+ * Clear BSS first so that there are no surprises...
+ */
+#ifdef CONFIG_ISA_DUAL_ISSUE
+	seth	r2, #high(__bss_start)
+	or3	r2, r2, #low(__bss_start)
+	add	r2, r12
+	seth	r3, #high(_ebss)
+	or3	r3, r3, #low(_ebss)
+	add	r3, r12
+	sub	r3, r2
+
+	; R4 = BSS size in longwords (rounded down)
+	mv	r4, r3		    ||	ldi	r1, #0
+	srli	r4, #4		    ||	addi	r2, #-4
+	beqz	r4, .Lendloop1
+.Lloop1:
+#ifndef CONFIG_CHIP_M32310
+	; Touch memory for the no-write-allocating cache.
+	ld	r0, @(4,r2)
+#endif
+	st	r1, @+r2	    ||	addi	r4, #-1
+	st	r1, @+r2
+	st	r1, @+r2
+	st	r1, @+r2	    ||	cmpeq	r1, r4	; R4 = 0?
+	bnc	.Lloop1
+.Lendloop1:
+	and3	r4, r3, #15
+	addi	r2, #4
+	beqz	r4, .Lendloop2
+.Lloop2:
+	stb	r1, @r2		    ||	addi	r4, #-1
+	addi	r2, #1
+	bnez	r4, .Lloop2
+.Lendloop2:
+
+#else /* not CONFIG_ISA_DUAL_ISSUE */
+	seth	r2, #high(__bss_start)
+	or3	r2, r2, #low(__bss_start)
+	add	r2, r12
+	seth	r3, #high(_ebss)
+	or3	r3, r3, #low(_ebss)
+	add	r3, r12
+	sub	r3, r2
+	mv	r4, r3
+	srli	r4, #2		; R4 = BSS size in longwords (rounded down)
+	ldi	r1, #0		; clear R1 for longwords store
+	addi	r2, #-4		; account for pre-inc store
+	beqz	r4, .Lendloop1	; any more to go?
+.Lloop1:
+	st	r1, @+r2	; yep, zero out another longword
+	addi	r4, #-1		; decrement count
+	bnez	r4, .Lloop1	; go do some more
+.Lendloop1:
+
+#endif /* not CONFIG_ISA_DUAL_ISSUE */
+
+	seth	r1, #high(end)
+	or3	r1, r1, #low(end)
+	add	r1, r12
+	mv	sp, r1
+
+/*
+ * decompress the kernel
+ */
+	mv	r0, sp
+	srli	r0, 31				/* MMU is ON or OFF */
+        seth	r1, #high(zimage_data)
+        or3	r1, r1, #low(zimage_data)
+	add	r1, r12
+        seth	r2, #high(zimage_len)
+        or3	r2, r2, #low(zimage_len)
+	mv	r3, sp
+
+	bl	decompress_kernel
+
+#if defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_VDEC2)
+	/* Cache flush */
+	ldi	r0, -1
+	ldi	r1, 0xd0	; invalidate i-cache, copy back d-cache
+	stb	r1, @r0
+#elif defined(CONFIG_CHIP_M32102)
+	/* Cache flush */
+	ldi	r0, -2
+	ldi	r1, 0x0100	; invalidate
+	stb	r1, @r0
+#else
+#error "put your cache flush function, please"
+#endif
+
+	mv	r0, sp
+	srli	r0, 31				/* MMU is ON or OFF */
+	slli	r0, 31
+	or3	r0, r0, #0x2000
+	seth	r1, #high(CONFIG_MEMORY_START)
+	or	r0, r1
+	jmp	r0
+
+	.balign 512
+fake_headers_as_bzImage:
+	.short	0
+	.ascii	"HdrS"
+	.short	0x0202
+	.short	0
+	.short	0
+	.byte	0x00, 0x10
+	.short	0
+	.byte	0
+	.byte	1
+	.byte	0x00, 0x80
+	.long	0
+	.long	0
+
diff --git a/arch/m32r/boot/compressed/install.sh b/arch/m32r/boot/compressed/install.sh
new file mode 100644
index 0000000..6d72e9e
--- /dev/null
+++ b/arch/m32r/boot/compressed/install.sh
@@ -0,0 +1,57 @@
+#!/bin/sh
+#
+# arch/sh/boot/install.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Russell King
+# Adapted from code in arch/arm/boot/install.sh by Stuart Menefy
+# Adapted from code in arch/sh/boot/install.sh by Takeo Takahashi
+#
+# "make install" script for sh architecture
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+#
+
+# User may have a custom install script
+
+if [ -x /sbin/installkernel ]; then
+  exec /sbin/installkernel "$@"
+fi
+
+if [ "$2" = "zImage" ]; then
+# Compressed install
+  echo "Installing compressed kernel"
+  if [ -f $4/vmlinuz-$1 ]; then
+    mv $4/vmlinuz-$1 $4/vmlinuz.old
+  fi
+
+  if [ -f $4/System.map-$1 ]; then
+    mv $4/System.map-$1 $4/System.old
+  fi
+
+  cat $2 > $4/vmlinuz-$1
+  cp $3 $4/System.map-$1
+else
+# Normal install
+  echo "Installing normal kernel"
+  if [ -f $4/vmlinux-$1 ]; then
+    mv $4/vmlinux-$1 $4/vmlinux.old
+  fi
+
+  if [ -f $4/System.map ]; then
+    mv $4/System.map $4/System.old
+  fi
+
+  cat $2 > $4/vmlinux-$1
+  cp $3 $4/System.map
+fi
diff --git a/arch/m32r/boot/compressed/m32r_sio.c b/arch/m32r/boot/compressed/m32r_sio.c
new file mode 100644
index 0000000..bad5475
--- /dev/null
+++ b/arch/m32r/boot/compressed/m32r_sio.c
@@ -0,0 +1,68 @@
+/*
+ * arch/m32r/boot/compressed/m32r_sio.c
+ *
+ * 2003-02-12:	Takeo Takahashi
+ *
+ */
+
+#include <linux/config.h>
+
+static void putc(char c);
+
+static int puts(const char *s)
+{
+	char c;
+	while ((c = *s++)) putc(c);
+	return 0;
+}
+
+#if defined(CONFIG_PLAT_M32700UT_Alpha) || defined(CONFIG_PLAT_M32700UT)
+#include <asm/m32r.h>
+#include <asm/io.h>
+
+#define USE_FPGA_MAP	0
+
+#if USE_FPGA_MAP
+/*
+ * fpga configuration program uses MMU, and define map as same as
+ * M32104 uT-Engine board.
+ */
+#define BOOT_SIO0STS	(volatile unsigned short *)(0x02c00000 + 0x20006)
+#define BOOT_SIO0TXB	(volatile unsigned short *)(0x02c00000 + 0x2000c)
+#else
+#undef PLD_BASE
+#define PLD_BASE	0xa4c00000
+#define BOOT_SIO0STS	PLD_ESIO0STS
+#define BOOT_SIO0TXB	PLD_ESIO0TXB
+#endif
+
+static void putc(char c)
+{
+
+	while ((*BOOT_SIO0STS & 0x3) != 0x3) ;
+	if (c == '\n') {
+		*BOOT_SIO0TXB = '\r';
+		while ((*BOOT_SIO0STS & 0x3) != 0x3) ;
+	}
+	*BOOT_SIO0TXB = c;
+}
+#else /* defined(CONFIG_PLAT_M32700UT_Alpha) || defined(CONFIG_PLAT_M32700UT) */
+#ifdef CONFIG_MMU
+#define SIO0STS	(volatile unsigned short *)(0xa0efd000 + 14)
+#define SIO0TXB	(volatile unsigned short *)(0xa0efd000 + 30)
+#else
+#define SIO0STS	(volatile unsigned short *)(0x00efd000 + 14)
+#define SIO0TXB	(volatile unsigned short *)(0x00efd000 + 30)
+#endif
+
+static void putc(char c)
+{
+
+	while ((*SIO0STS & 0x1) == 0) ;
+	if (c == '\n') {
+		*SIO0TXB = '\r';
+		while ((*SIO0STS & 0x1) == 0) ;
+	}
+	*SIO0TXB = c;
+}
+#endif
diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c
new file mode 100644
index 0000000..70fa799
--- /dev/null
+++ b/arch/m32r/boot/compressed/misc.c
@@ -0,0 +1,210 @@
+/*
+ * arch/m32r/boot/compressed/misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ *
+ * Adapted for SH by Stuart Menefy, Aug 1999
+ *
+ * 2003-02-12:	Support M32R by Takeo Takahashi
+ * 		This is based on arch/sh/boot/compressed/misc.c.
+ */
+
+#include <linux/config.h>
+#include <linux/string.h>
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args)  args
+#define STATIC static
+
+#undef memset
+#undef memcpy
+#define memzero(s, n)     memset ((s), 0, (n))
+
+typedef unsigned char  uch;
+typedef unsigned short ush;
+typedef unsigned long  ulg;
+
+#define WSIZE 0x8000		/* Window size must be at least 32k, */
+				/* and a power of two */
+
+static uch *inbuf;	     /* input buffer */
+static uch window[WSIZE];    /* Sliding window buffer */
+
+static unsigned insize = 0;  /* valid bytes in inbuf */
+static unsigned inptr = 0;   /* index of next byte to be processed in inbuf */
+static unsigned outcnt = 0;  /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
+#define COMMENT      0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
+#define RESERVED     0xC0 /* bit 6,7:   reserved */
+
+#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Trace(x) fprintf x
+#  define Tracev(x) {if (verbose) fprintf x ;}
+#  define Tracevv(x) {if (verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+static int  fill_inbuf(void);
+static void flush_window(void);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+static unsigned char *input_data;
+static int input_len;
+
+static long bytes_out = 0;
+static uch *output_data;
+static unsigned long output_ptr = 0;
+
+#include "m32r_sio.c"
+
+static void *malloc(int size);
+static void free(void *where);
+
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
+
+#define HEAP_SIZE             0x10000
+
+#include "../../../../lib/inflate.c"
+
+static void *malloc(int size)
+{
+	void *p;
+
+	if (size <0) error("Malloc error");
+	if (free_mem_ptr == 0) error("Memory error");
+
+	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
+
+	p = (void *)free_mem_ptr;
+	free_mem_ptr += size;
+
+	if (free_mem_ptr >= free_mem_end_ptr)
+		error("Out of memory");
+
+	return p;
+}
+
+static void free(void *where)
+{	/* Don't care */
+}
+
+static void gzip_mark(void **ptr)
+{
+	*ptr = (void *) free_mem_ptr;
+}
+
+static void gzip_release(void **ptr)
+{
+	free_mem_ptr = (long) *ptr;
+}
+
+void* memset(void* s, int c, size_t n)
+{
+	int i;
+	char *ss = (char*)s;
+
+	for (i=0;i<n;i++) ss[i] = c;
+	return s;
+}
+
+void* memcpy(void* __dest, __const void* __src,
+			    size_t __n)
+{
+	int i;
+	char *d = (char *)__dest, *s = (char *)__src;
+
+	for (i=0;i<__n;i++) d[i] = s[i];
+	return __dest;
+}
+
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty
+ * and at least one byte is really needed.
+ */
+static int fill_inbuf(void)
+{
+	if (insize != 0) {
+		error("ran out of input data");
+	}
+
+	inbuf = input_data;
+	insize = input_len;
+	inptr = 1;
+	return inbuf[0];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+static void flush_window(void)
+{
+    ulg c = crc;         /* temporary variable */
+    unsigned n;
+    uch *in, *out, ch;
+
+    in = window;
+    out = &output_data[output_ptr];
+    for (n = 0; n < outcnt; n++) {
+	    ch = *out++ = *in++;
+	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+    }
+    crc = c;
+    bytes_out += (ulg)outcnt;
+    output_ptr += (ulg)outcnt;
+    outcnt = 0;
+}
+
+static void error(char *x)
+{
+	puts("\n\n");
+	puts(x);
+	puts("\n\n -- System halted");
+
+	while(1);	/* Halt */
+}
+
+/* return decompressed size */
+void
+decompress_kernel(int mmu_on, unsigned char *zimage_data,
+		  unsigned int zimage_len, unsigned long heap)
+{
+	output_data = (unsigned char *)CONFIG_MEMORY_START + 0x2000
+		+ (mmu_on ? 0x80000000 : 0);
+	free_mem_ptr = heap;
+	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
+	input_data = zimage_data;
+	input_len = zimage_len;
+
+	makecrc();
+	puts("Uncompressing Linux... ");
+	gunzip();
+	puts("Ok, booting the kernel.\n");
+}
diff --git a/arch/m32r/boot/compressed/vmlinux.lds.S b/arch/m32r/boot/compressed/vmlinux.lds.S
new file mode 100644
index 0000000..a184317
--- /dev/null
+++ b/arch/m32r/boot/compressed/vmlinux.lds.S
@@ -0,0 +1,31 @@
+#include <linux/config.h>
+
+OUTPUT_ARCH(m32r)
+ENTRY(startup)
+SECTIONS
+{
+  . = CONFIG_MEMORY_START + 0x00400000;
+
+  _text = .;
+  .text : { *(.text) } = 0
+  .rodata : { *(.rodata) *(.rodata.*) }
+  _etext = .;
+
+  . = ALIGN(32 / 8);
+  .data : { *(.data) }
+  . = ALIGN(32 / 8);
+  _got = .;
+  .got  : { *(.got) _egot = .; *(.got.*) }
+  _edata  =  .;
+
+  . = ALIGN(32 / 8);
+  __bss_start = .;
+  .bss : { *(.bss) *(.sbss) }
+  . = ALIGN(32 / 8);
+  _ebss = .;
+  . = ALIGN(4096);
+  . += 4096;
+  end = . ;
+
+  got_len = (_egot - _got);
+}
diff --git a/arch/m32r/boot/compressed/vmlinux.scr b/arch/m32r/boot/compressed/vmlinux.scr
new file mode 100644
index 0000000..924c799
--- /dev/null
+++ b/arch/m32r/boot/compressed/vmlinux.scr
@@ -0,0 +1,9 @@
+SECTIONS
+{
+  .data : {
+	zimage_data = .;
+	*(.data)
+	zimage_data_end = .;
+	}
+  zimage_len = zimage_data_end - zimage_data;
+}
diff --git a/arch/m32r/boot/setup.S b/arch/m32r/boot/setup.S
new file mode 100644
index 0000000..5d25643
--- /dev/null
+++ b/arch/m32r/boot/setup.S
@@ -0,0 +1,167 @@
+/*
+ *  linux/arch/m32r/boot/setup.S -- A setup code.
+ *
+ *  Copyright (C) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
+ *  and Hitoshi Yamamoto
+ *
+ */
+/* $Id$ */
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+#include <linux/config.h>
+#include <asm/assembler.h>
+#include <asm/mmu_context.h>
+#include <asm/m32r.h>
+
+/*
+ * References to members of the boot_cpu_data structure.
+ */
+
+#define CPU_PARAMS	boot_cpu_data
+#define M32R_MCICAR	 0xfffffff0
+#define M32R_MCDCAR	 0xfffffff4
+#define M32R_MCCR 	 0xfffffffc
+#define M32R_BSCR0	 0xffffffd2
+
+;BSEL
+#define BSEL0CR0	 0x00ef5000
+#define	BSEL0CR1	 0x00ef5004
+#define BSEL1CR0	 0x00ef5100
+#define BSEL1CR1	 0x00ef5104
+#define BSEL0CR0_VAL	 0x00000000
+#define BSEL0CR1_VAL	 0x01200100
+#define BSEL1CR0_VAL	 0x01018000
+#define BSEL1CR1_VAL	 0x00200001
+
+;SDRAMC
+#define SDRAMC_SDRF0	 0x00ef6000
+#define SDRAMC_SDRF1	 0x00ef6004
+#define SDRAMC_SDIR0	 0x00ef6008
+#define SDRAMC_SDIR1	 0x00ef600c
+#define SDRAMC_SD0ADR	 0x00ef6020
+#define SDRAMC_SD0ER	 0x00ef6024
+#define SDRAMC_SD0TR	 0x00ef6028
+#define SDRAMC_SD0MOD	 0x00ef602c
+#define SDRAMC_SD1ADR	 0x00ef6040
+#define SDRAMC_SD1ER	 0x00ef6044
+#define SDRAMC_SD1TR	 0x00ef6048
+#define SDRAMC_SD1MOD	 0x00ef604c
+#define SDRAM0		 0x18000000
+#define SDRAM1		 0x1c000000
+
+/*------------------------------------------------------------------------
+ * start up
+ */
+
+/*------------------------------------------------------------------------
+ * Kernel entry
+ */
+	.section .boot, "ax"
+ENTRY(boot)
+
+/* Set cache mode */
+#if defined(CONFIG_CHIP_XNUX2)
+	ldi	r0, #-2              ;LDIMM	(r0, M32R_MCCR)
+	ldi	r1, #0x0101		; cache on (with invalidation)
+;	ldi	r1, #0x00		; cache off
+	sth	r1, @r0
+#elif defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_VDEC2) \
+    || defined(CONFIG_CHIP_OPSP)
+	ldi	r0, #-4              ;LDIMM	(r0, M32R_MCCR)
+	ldi	r1, #0x73		; cache on (with invalidation)
+;	ldi	r1, #0x00		; cache off
+	st	r1, @r0
+#elif defined(CONFIG_CHIP_M32102)
+	ldi	r0, #-4              ;LDIMM	(r0, M32R_MCCR)
+	ldi	r1, #0x101		; cache on (with invalidation)
+;	ldi	r1, #0x00		; cache off
+	st	r1, @r0
+#else
+#error unknown chip configuration
+#endif
+
+#ifdef CONFIG_SMP
+	;; if not BSP (CPU#0) goto AP_loop
+	seth	r5, #shigh(M32R_CPUID_PORTL)
+	ld      r5, @(low(M32R_CPUID_PORTL), r5)
+	bnez	r5, AP_loop
+#if !defined(CONFIG_PLAT_USRV)
+	;; boot AP
+	ld24	r5, #0xeff2f8		; IPICR7
+	ldi	r6, #0x2		; IPI to CPU1
+	st	r6, @r5
+#endif
+#endif
+
+/*
+ *  Now, Jump to stext
+ *        if with MMU,    TLB on.
+ *        if with no MMU, only jump.
+ */
+ 	.global	eit_vector
+mmu_on:
+	LDIMM	(r13, stext)
+#ifdef CONFIG_MMU
+	bl	init_tlb
+	LDIMM	(r2, eit_vector)		; set EVB(cr5)
+	mvtc    r2, cr5
+	seth	r0, #high(MMU_REG_BASE)		; Set MMU_REG_BASE higher
+	or3     r0, r0, #low(MMU_REG_BASE)	; Set MMU_REG_BASE lower
+	ldi     r1, #0x01
+	st      r1, @(MATM_offset,r0)		; Set MATM (T bit ON)
+	ld      r0, @(MATM_offset,r0)		; Check
+#else
+	seth	r0,#high(M32R_MCDCAR)
+	or3	r0,r0,#low(M32R_MCDCAR)
+	ld24	r1,#0x8080
+	st	r1,@r0
+#endif	/* CONFIG_MMU */
+	jmp	r13
+	nop
+	nop
+
+#ifdef CONFIG_SMP
+/*
+ * AP wait loop
+ */
+ENTRY(AP_loop)
+	;; disable interrupt
+	clrpsw	#0x40
+	;; reset EVB
+	LDIMM	(r4, _AP_RE)
+	seth	r5, #high(__PAGE_OFFSET)
+	or3	r5, r5, #low(__PAGE_OFFSET)
+	not	r5, r5
+	and	r4, r5
+	mvtc	r4, cr5
+	;; disable maskable interrupt
+	seth	r4, #high(M32R_ICU_IMASK_PORTL)
+	or3	r4, r4, #low(M32R_ICU_IMASK_PORTL)
+	ldi	r5, #0
+	st	r5, @r4
+	ld	r5, @r4
+	;; enable only IPI
+	setpsw	#0x40
+    	;; LOOOOOOOOOOOOOOP!!!
+	.fillinsn
+2:
+	nop
+	nop
+	bra	2b
+	nop
+	nop
+
+#ifdef CONFIG_CHIP_M32700_TS1
+	.global	dcache_dummy
+	.balign	16, 0
+dcache_dummy:
+	.byte	16
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+#endif	/* CONFIG_SMP */
+
+	.end
+
diff --git a/arch/m32r/defconfig b/arch/m32r/defconfig
new file mode 100644
index 0000000..417c95b
--- /dev/null
+++ b/arch/m32r/defconfig
@@ -0,0 +1,747 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:10:44 2005
+#
+CONFIG_M32R=y
+# CONFIG_UID16 is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor type and features
+#
+# CONFIG_PLAT_MAPPI is not set
+# CONFIG_PLAT_USRV is not set
+CONFIG_PLAT_M32700UT=y
+# CONFIG_PLAT_OPSPUT is not set
+# CONFIG_PLAT_OAKS32R is not set
+# CONFIG_PLAT_MAPPI2 is not set
+CONFIG_CHIP_M32700=y
+# CONFIG_CHIP_M32102 is not set
+# CONFIG_CHIP_VDEC2 is not set
+# CONFIG_CHIP_OPSP is not set
+CONFIG_MMU=y
+CONFIG_TLB_ENTRIES=32
+CONFIG_ISA_M32R2=y
+CONFIG_ISA_DSP_LEVEL2=y
+CONFIG_ISA_DUAL_ISSUE=y
+CONFIG_BUS_CLOCK=50000000
+CONFIG_TIMER_DIVIDE=128
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_NOHIGHMEM=y
+# CONFIG_DISCONTIGMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PREEMPT=y
+# CONFIG_HAVE_DEC_LOCK is not set
+# CONFIG_SMP is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+# CONFIG_M32R_PCC is not set
+CONFIG_M32R_CFC=y
+CONFIG_M32R_CFC_NUM=1
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_NE2000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_M32R_SIO=y
+CONFIG_SERIAL_M32R_SIO_CONSOLE=y
+CONFIG_SERIAL_M32R_PLDSIO=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_DS1302=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_CPIA is not set
+CONFIG_VIDEO_M32R_AR=y
+CONFIG_VIDEO_M32R_AR_M64278=y
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+CONFIG_JBD_DEBUG=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile
new file mode 100644
index 0000000..cfd690b
--- /dev/null
+++ b/arch/m32r/kernel/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the Linux/M32R kernel.
+#
+
+extra-y	:= head.o init_task.o vmlinux.lds
+
+obj-y	:= process.o entry.o traps.o align.o irq.o setup.o time.o \
+	m32r_ksyms.o sys_m32r.o semaphore.o signal.o ptrace.o
+
+obj-$(CONFIG_SMP)		+= smp.o smpboot.o
+obj-$(CONFIG_PLAT_MAPPI)	+= setup_mappi.o io_mappi.o
+obj-$(CONFIG_PLAT_MAPPI2)	+= setup_mappi2.o io_mappi2.o
+obj-$(CONFIG_PLAT_USRV)		+= setup_usrv.o io_usrv.o
+obj-$(CONFIG_PLAT_M32700UT)	+= setup_m32700ut.o io_m32700ut.o
+obj-$(CONFIG_PLAT_OPSPUT)	+= setup_opsput.o io_opsput.o
+obj-$(CONFIG_MODULES)		+= module.o
+obj-$(CONFIG_PLAT_OAKS32R)	+= setup_oaks32r.o io_oaks32r.o
+
+EXTRA_AFLAGS	:= -traditional
+
diff --git a/arch/m32r/kernel/align.c b/arch/m32r/kernel/align.c
new file mode 100644
index 0000000..48ec297
--- /dev/null
+++ b/arch/m32r/kernel/align.c
@@ -0,0 +1,585 @@
+/*
+ * align.c - address exception handler for M32R
+ *
+ * Copyright (c) 2003 Hitoshi Yamamoto
+ */
+
+#include <linux/config.h>
+#include <asm/ptrace.h>
+#include <asm/uaccess.h>
+
+static int get_reg(struct pt_regs *regs, int nr)
+{
+	int val;
+
+	if (nr < 4)
+		val = *(unsigned long *)(&regs->r0 + nr);
+	else if (nr < 7)
+		val = *(unsigned long *)(&regs->r4 + (nr - 4));
+	else if (nr < 13)
+		val = *(unsigned long *)(&regs->r7 + (nr - 7));
+	else
+		val = *(unsigned long *)(&regs->fp + (nr - 13));
+
+	return val;
+}
+
+static void set_reg(struct pt_regs *regs, int nr, int val)
+{
+	if (nr < 4)
+		*(unsigned long *)(&regs->r0 + nr) = val;
+	else if (nr < 7)
+		*(unsigned long *)(&regs->r4 + (nr - 4)) = val;
+	else if (nr < 13)
+		*(unsigned long *)(&regs->r7 + (nr - 7)) = val;
+	else
+		*(unsigned long *)(&regs->fp + (nr - 13)) = val;
+}
+
+#define REG1(insn)	(((insn) & 0x0f00) >> 8)
+#define REG2(insn)	((insn) & 0x000f)
+#define PSW_BC		0x100
+
+/* O- instruction */
+#define ISA_LD1		0x20c0	/* ld Rdest, @Rsrc */
+#define ISA_LD2		0x20e0	/* ld Rdest, @Rsrc+ */
+#define ISA_LDH		0x20a0	/* ldh Rdest, @Rsrc */
+#define ISA_LDUH	0x20b0	/* lduh Rdest, @Rsrc */
+#define ISA_ST1		0x2040	/* st Rsrc1, @Rsrc2 */
+#define ISA_ST2		0x2060	/* st Rsrc1, @+Rsrc2 */
+#define ISA_ST3		0x2070	/* st Rsrc1, @-Rsrc2 */
+#define ISA_STH1	0x2020	/* sth Rsrc1, @Rsrc2 */
+#define ISA_STH2	0x2030	/* sth Rsrc1, @Rsrc2+ */
+
+#ifdef CONFIG_ISA_DUAL_ISSUE
+
+/* OS instruction */
+#define ISA_ADD		0x00a0	/* add Rdest, Rsrc */
+#define ISA_ADDI	0x4000	/* addi Rdest, #imm8 */
+#define ISA_ADDX	0x0090	/* addx Rdest, Rsrc */
+#define ISA_AND		0x00c0	/* and Rdest, Rsrc */
+#define ISA_CMP		0x0040	/* cmp Rsrc1, Rsrc2 */
+#define ISA_CMPEQ	0x0060	/* cmpeq Rsrc1, Rsrc2 */
+#define ISA_CMPU	0x0050	/* cmpu Rsrc1, Rsrc2 */
+#define ISA_CMPZ	0x0070	/* cmpz Rsrc */
+#define ISA_LDI		0x6000	/* ldi Rdest, #imm8 */
+#define ISA_MV		0x1080	/* mv Rdest, Rsrc */
+#define ISA_NEG		0x0030	/* neg Rdest, Rsrc */
+#define ISA_NOP		0x7000	/* nop */
+#define ISA_NOT		0x00b0	/* not Rdest, Rsrc */
+#define ISA_OR		0x00e0	/* or Rdest, Rsrc */
+#define ISA_SUB		0x0020	/* sub Rdest, Rsrc */
+#define ISA_SUBX	0x0010	/* subx Rdest, Rsrc */
+#define ISA_XOR		0x00d0	/* xor Rdest, Rsrc */
+
+/* -S instruction */
+#define ISA_MUL		0x1060	/* mul Rdest, Rsrc */
+#define ISA_MULLO_A0	0x3010	/* mullo Rsrc1, Rsrc2, A0 */
+#define ISA_MULLO_A1	0x3090	/* mullo Rsrc1, Rsrc2, A1 */
+#define ISA_MVFACMI_A0	0x50f2	/* mvfacmi Rdest, A0 */
+#define ISA_MVFACMI_A1	0x50f6	/* mvfacmi Rdest, A1 */
+
+static int emu_addi(unsigned short insn, struct pt_regs *regs)
+{
+	char imm = (char)(insn & 0xff);
+	int dest = REG1(insn);
+	int val;
+
+	val = get_reg(regs, dest);
+	val += imm;
+	set_reg(regs, dest, val);
+
+	return 0;
+}
+
+static int emu_ldi(unsigned short insn, struct pt_regs *regs)
+{
+	char imm = (char)(insn & 0xff);
+
+	set_reg(regs, REG1(insn), (int)imm);
+
+	return 0;
+}
+
+static int emu_add(unsigned short insn, struct pt_regs *regs)
+{
+	int dest = REG1(insn);
+	int src = REG2(insn);
+	int val;
+
+	val = get_reg(regs, dest);
+	val += get_reg(regs, src);
+	set_reg(regs, dest, val);
+
+	return 0;
+}
+
+static int emu_addx(unsigned short insn, struct pt_regs *regs)
+{
+	int dest = REG1(insn);
+	unsigned int val, tmp;
+
+	val = regs->psw & PSW_BC ? 1 : 0;
+	tmp = get_reg(regs, dest);
+	val += tmp;
+	val += (unsigned int)get_reg(regs, REG2(insn));
+	set_reg(regs, dest, val);
+
+	/* C bit set */
+	if (val < tmp)
+		regs->psw |= PSW_BC;
+	else
+		regs->psw &= ~(PSW_BC);
+
+	return 0;
+}
+
+static int emu_and(unsigned short insn, struct pt_regs *regs)
+{
+	int dest = REG1(insn);
+	int val;
+
+	val = get_reg(regs, dest);
+	val &= get_reg(regs, REG2(insn));
+	set_reg(regs, dest, val);
+
+	return 0;
+}
+
+static int emu_cmp(unsigned short insn, struct pt_regs *regs)
+{
+	if (get_reg(regs, REG1(insn)) < get_reg(regs, REG2(insn)))
+		regs->psw |= PSW_BC;
+	else
+		regs->psw &= ~(PSW_BC);
+
+	return 0;
+}
+
+static int emu_cmpeq(unsigned short insn, struct pt_regs *regs)
+{
+	if (get_reg(regs, REG1(insn)) == get_reg(regs, REG2(insn)))
+		regs->psw |= PSW_BC;
+	else
+		regs->psw &= ~(PSW_BC);
+
+	return 0;
+}
+
+static int emu_cmpu(unsigned short insn, struct pt_regs *regs)
+{
+	if ((unsigned int)get_reg(regs, REG1(insn))
+		< (unsigned int)get_reg(regs, REG2(insn)))
+		regs->psw |= PSW_BC;
+	else
+		regs->psw &= ~(PSW_BC);
+
+	return 0;
+}
+
+static int emu_cmpz(unsigned short insn, struct pt_regs *regs)
+{
+	if (!get_reg(regs, REG2(insn)))
+		regs->psw |= PSW_BC;
+	else
+		regs->psw &= ~(PSW_BC);
+
+	return 0;
+}
+
+static int emu_mv(unsigned short insn, struct pt_regs *regs)
+{
+	int val;
+
+	val = get_reg(regs, REG2(insn));
+	set_reg(regs, REG1(insn), val);
+
+	return 0;
+}
+
+static int emu_neg(unsigned short insn, struct pt_regs *regs)
+{
+	int val;
+
+	val = get_reg(regs, REG2(insn));
+	set_reg(regs, REG1(insn), 0 - val);
+
+	return 0;
+}
+
+static int emu_not(unsigned short insn, struct pt_regs *regs)
+{
+	int val;
+
+	val = get_reg(regs, REG2(insn));
+	set_reg(regs, REG1(insn), ~val);
+
+	return 0;
+}
+
+static int emu_or(unsigned short insn, struct pt_regs *regs)
+{
+	int dest = REG1(insn);
+	int val;
+
+	val = get_reg(regs, dest);
+	val |= get_reg(regs, REG2(insn));
+	set_reg(regs, dest, val);
+
+	return 0;
+}
+
+static int emu_sub(unsigned short insn, struct pt_regs *regs)
+{
+	int dest = REG1(insn);
+	int val;
+
+	val = get_reg(regs, dest);
+	val -= get_reg(regs, REG2(insn));
+	set_reg(regs, dest, val);
+
+	return 0;
+}
+
+static int emu_subx(unsigned short insn, struct pt_regs *regs)
+{
+	int dest = REG1(insn);
+	unsigned int val, tmp;
+
+	val = tmp = get_reg(regs, dest);
+	val -= (unsigned int)get_reg(regs, REG2(insn));
+	val -= regs->psw & PSW_BC ? 1 : 0;
+	set_reg(regs, dest, val);
+
+	/* C bit set */
+	if (val > tmp)
+		regs->psw |= PSW_BC;
+	else
+		regs->psw &= ~(PSW_BC);
+
+	return 0;
+}
+
+static int emu_xor(unsigned short insn, struct pt_regs *regs)
+{
+	int dest = REG1(insn);
+	unsigned int val;
+
+	val = (unsigned int)get_reg(regs, dest);
+	val ^= (unsigned int)get_reg(regs, REG2(insn));
+	set_reg(regs, dest, val);
+
+	return 0;
+}
+
+static int emu_mul(unsigned short insn, struct pt_regs *regs)
+{
+	int dest = REG1(insn);
+	int reg1, reg2;
+
+	reg1 = get_reg(regs, dest);
+	reg2 = get_reg(regs, REG2(insn));
+
+	__asm__ __volatile__ (
+		"mul	%0, %1;		\n\t"
+		: "+r" (reg1) : "r" (reg2)
+	);
+
+	set_reg(regs, dest, reg1);
+
+	return 0;
+}
+
+static int emu_mullo_a0(unsigned short insn, struct pt_regs *regs)
+{
+	int reg1, reg2;
+
+	reg1 = get_reg(regs, REG1(insn));
+	reg2 = get_reg(regs, REG2(insn));
+
+	__asm__ __volatile__ (
+		"mullo		%0, %1, a0;	\n\t"
+		"mvfachi	%0, a0;		\n\t"
+		"mvfaclo	%1, a0;		\n\t"
+		: "+r" (reg1), "+r" (reg2)
+	);
+
+	regs->acc0h = reg1;
+	regs->acc0l = reg2;
+
+	return 0;
+}
+
+static int emu_mullo_a1(unsigned short insn, struct pt_regs *regs)
+{
+	int reg1, reg2;
+
+	reg1 = get_reg(regs, REG1(insn));
+	reg2 = get_reg(regs, REG2(insn));
+
+	__asm__ __volatile__ (
+		"mullo		%0, %1, a0;	\n\t"
+		"mvfachi	%0, a0;		\n\t"
+		"mvfaclo	%1, a0;		\n\t"
+		: "+r" (reg1), "+r" (reg2)
+	);
+
+	regs->acc1h = reg1;
+	regs->acc1l = reg2;
+
+	return 0;
+}
+
+static int emu_mvfacmi_a0(unsigned short insn, struct pt_regs *regs)
+{
+	unsigned long val;
+
+	val = (regs->acc0h << 16) | (regs->acc0l >> 16);
+	set_reg(regs, REG1(insn), (int)val);
+
+	return 0;
+}
+
+static int emu_mvfacmi_a1(unsigned short insn, struct pt_regs *regs)
+{
+	unsigned long val;
+
+	val = (regs->acc1h << 16) | (regs->acc1l >> 16);
+	set_reg(regs, REG1(insn), (int)val);
+
+	return 0;
+}
+
+static int emu_m32r2(unsigned short insn, struct pt_regs *regs)
+{
+	int res = -1;
+
+	if ((insn & 0x7fff) == ISA_NOP)	/* nop */
+		return 0;
+
+	switch(insn & 0x7000) {
+	case ISA_ADDI:		/* addi Rdest, #imm8 */
+		res = emu_addi(insn, regs);
+		break;
+	case ISA_LDI:		/* ldi Rdest, #imm8 */
+		res = emu_ldi(insn, regs);
+		break;
+	default:
+		break;
+	}
+
+	if (!res)
+		return 0;
+
+	switch(insn & 0x70f0) {
+	case ISA_ADD:		/* add Rdest, Rsrc */
+		res = emu_add(insn, regs);
+		break;
+	case ISA_ADDX:		/* addx Rdest, Rsrc */
+		res = emu_addx(insn, regs);
+		break;
+	case ISA_AND:		/* and Rdest, Rsrc */
+		res = emu_and(insn, regs);
+		break;
+	case ISA_CMP:		/* cmp Rsrc1, Rsrc2 */
+		res = emu_cmp(insn, regs);
+		break;
+	case ISA_CMPEQ:		/* cmpeq Rsrc1, Rsrc2 */
+		res = emu_cmpeq(insn, regs);
+		break;
+	case ISA_CMPU:		/* cmpu Rsrc1, Rsrc2 */
+		res = emu_cmpu(insn, regs);
+		break;
+	case ISA_CMPZ:		/* cmpz Rsrc */
+		res = emu_cmpz(insn, regs);
+		break;
+	case ISA_MV:		/* mv Rdest, Rsrc */
+		res = emu_mv(insn, regs);
+		break;
+	case ISA_NEG:		/* neg Rdest, Rsrc */
+		res = emu_neg(insn, regs);
+		break;
+	case ISA_NOT:		/* not Rdest, Rsrc */
+		res = emu_not(insn, regs);
+		break;
+	case ISA_OR:		/* or Rdest, Rsrc */
+		res = emu_or(insn, regs);
+		break;
+	case ISA_SUB:		/* sub Rdest, Rsrc */
+		res = emu_sub(insn, regs);
+		break;
+	case ISA_SUBX:		/* subx Rdest, Rsrc */
+		res = emu_subx(insn, regs);
+		break;
+	case ISA_XOR:		/* xor Rdest, Rsrc */
+		res = emu_xor(insn, regs);
+		break;
+	case ISA_MUL:		/* mul Rdest, Rsrc */
+		res = emu_mul(insn, regs);
+		break;
+	case ISA_MULLO_A0:	/* mullo Rsrc1, Rsrc2 */
+		res = emu_mullo_a0(insn, regs);
+		break;
+	case ISA_MULLO_A1:	/* mullo Rsrc1, Rsrc2 */
+		res = emu_mullo_a1(insn, regs);
+		break;
+	default:
+		break;
+	}
+
+	if (!res)
+		return 0;
+
+	switch(insn & 0x70ff) {
+	case ISA_MVFACMI_A0:	/* mvfacmi Rdest */
+		res = emu_mvfacmi_a0(insn, regs);
+		break;
+	case ISA_MVFACMI_A1:	/* mvfacmi Rdest */
+		res = emu_mvfacmi_a1(insn, regs);
+		break;
+	default:
+		break;
+	}
+
+	return res;
+}
+
+#endif	/* CONFIG_ISA_DUAL_ISSUE */
+
+/*
+ * ld   : ?010 dest 1100 src
+ *        0010 dest 1110 src : ld Rdest, @Rsrc+
+ * ldh  : ?010 dest 1010 src
+ * lduh : ?010 dest 1011 src
+ * st   : ?010 src1 0100 src2
+ *        0010 src1 0110 src2 : st Rsrc1, @+Rsrc2
+ *        0010 src1 0111 src2 : st Rsrc1, @-Rsrc2
+ * sth  : ?010 src1 0010 src2
+ */
+
+static int insn_check(unsigned long insn, struct pt_regs *regs,
+	unsigned char **ucp)
+{
+	int res = 0;
+
+	/*
+	 * 32bit insn
+	 *  ld Rdest, @(disp16, Rsrc)
+	 *  st Rdest, @(disp16, Rsrc)
+	 */
+	if (insn & 0x80000000) {	/* 32bit insn */
+		*ucp += (short)(insn & 0x0000ffff);
+		regs->bpc += 4;
+	} else {			/* 16bit insn */
+#ifdef CONFIG_ISA_DUAL_ISSUE
+		/* parallel exec check */
+		if (!(regs->bpc & 0x2) && insn & 0x8000) {
+			res = emu_m32r2((unsigned short)insn, regs);
+			regs->bpc += 4;
+		} else
+#endif	/* CONFIG_ISA_DUAL_ISSUE */
+			regs->bpc += 2;
+	}
+
+	return res;
+}
+
+static int emu_ld(unsigned long insn32, struct pt_regs *regs)
+{
+	unsigned char *ucp;
+	unsigned long val;
+	unsigned short insn16;
+	int size, src;
+
+	insn16 = insn32 >> 16;
+	src = REG2(insn16);
+	ucp = (unsigned char *)get_reg(regs, src);
+
+	if (insn_check(insn32, regs, &ucp))
+		return -1;
+
+	size = insn16 & 0x0040 ? 4 : 2;
+	if (copy_from_user(&val, ucp, size))
+		return -1;
+
+	if (size == 2)
+		val >>= 16;
+
+	/* ldh sign check */
+	if ((insn16 & 0x00f0) == 0x00a0 && (val & 0x8000))
+		val |= 0xffff0000;
+
+	set_reg(regs, REG1(insn16), val);
+
+	/* ld increment check */
+	if ((insn16 & 0xf0f0) == ISA_LD2)	/* ld Rdest, @Rsrc+ */
+		set_reg(regs, src, (unsigned long)(ucp + 4));
+
+	return 0;
+}
+
+static int emu_st(unsigned long insn32, struct pt_regs *regs)
+{
+	unsigned char *ucp;
+	unsigned long val;
+	unsigned short insn16;
+	int size, src2;
+
+	insn16 = insn32 >> 16;
+	src2 = REG2(insn16);
+
+	ucp = (unsigned char *)get_reg(regs, src2);
+
+	if (insn_check(insn32, regs, &ucp))
+		return -1;
+
+	size = insn16 & 0x0040 ? 4 : 2;
+	val = get_reg(regs, REG1(insn16));
+	if (size == 2)
+		val <<= 16;
+
+	/* st inc/dec check */
+	if ((insn16 & 0xf0e0) == 0x2060) {
+		if (insn16 & 0x0010)
+			ucp -= 4;
+		else
+			ucp += 4;
+
+		set_reg(regs, src2, (unsigned long)ucp);
+	}
+
+	if (copy_to_user(ucp, &val, size))
+		return -1;
+
+	/* sth inc check */
+	if ((insn16 & 0xf0f0) == ISA_STH2) {
+		ucp += 2;
+		set_reg(regs, src2, (unsigned long)ucp);
+	}
+
+	return 0;
+}
+
+int handle_unaligned_access(unsigned long insn32, struct pt_regs *regs)
+{
+	unsigned short insn16;
+	int res;
+
+	insn16 = insn32 >> 16;
+
+	/* ld or st check */
+	if ((insn16 & 0x7000) != 0x2000)
+		return -1;
+
+	/* insn alignment check */
+	if ((insn16 & 0x8000) && (regs->bpc & 3))
+		return -1;
+
+	if (insn16 & 0x0080)	/* ld */
+		res = emu_ld(insn32, regs);
+	else			/* st */
+		res = emu_st(insn32, regs);
+
+	return res;
+}
+
diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
new file mode 100644
index 0000000..dddbf6b
--- /dev/null
+++ b/arch/m32r/kernel/entry.S
@@ -0,0 +1,1000 @@
+/*
+ *  linux/arch/m32r/kernel/entry.S
+ *
+ *  Copyright (c) 2001, 2002  Hirokazu Takata, Hitoshi Yamamoto, H. Kondo
+ *  Copyright (c) 2003  Hitoshi Yamamoto
+ *  Copyright (c) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ *
+ *  Taken from i386 version.
+ *    Copyright (C) 1991, 1992  Linus Torvalds
+ */
+
+/*
+ * entry.S contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all interrupts
+ * and faults that can result in a task-switch.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * Stack layout in 'ret_from_system_call':
+ * 	ptrace needs to have all regs on the stack.
+ *	if the order here is changed, it needs to be
+ *	updated in fork.c:copy_process, signal.c:do_signal,
+ *	ptrace.c and ptrace.h
+ *
+ * M32Rx/M32R2				M32R
+ *       @(sp)      - r4		ditto
+ *       @(0x04,sp) - r5		ditto
+ *       @(0x08,sp) - r6		ditto
+ *       @(0x0c,sp) - *pt_regs		ditto
+ *       @(0x10,sp) - r0		ditto
+ *       @(0x14,sp) - r1		ditto
+ *       @(0x18,sp) - r2		ditto
+ *       @(0x1c,sp) - r3		ditto
+ *       @(0x20,sp) - r7		ditto
+ *       @(0x24,sp) - r8		ditto
+ *       @(0x28,sp) - r9		ditto
+ *       @(0x2c,sp) - r10		ditto
+ *       @(0x30,sp) - r11		ditto
+ *       @(0x34,sp) - r12		ditto
+ *       @(0x38,sp) - syscall_nr	ditto
+ *       @(0x3c,sp) - acc0h		@(0x3c,sp) - acch
+ *       @(0x40,sp) - acc0l		@(0x40,sp) - accl
+ *       @(0x44,sp) - acc1h		@(0x44,sp) - psw
+ *       @(0x48,sp) - acc1l		@(0x48,sp) - bpc
+ *       @(0x4c,sp) - psw		@(0x4c,sp) - bbpsw
+ *       @(0x50,sp) - bpc		@(0x50,sp) - bbpc
+ *       @(0x54,sp) - bbpsw		@(0x54,sp) - spu (cr3)
+ *       @(0x58,sp) - bbpc		@(0x58,sp) - fp (r13)
+ *       @(0x5c,sp) - spu (cr3)		@(0x5c,sp) - lr (r14)
+ *       @(0x60,sp) - fp (r13)		@(0x60,sp) - spi (cr12)
+ *       @(0x64,sp) - lr (r14)		@(0x64,sp) - orig_r0
+ *       @(0x68,sp) - spi (cr2)
+ *       @(0x6c,sp) - orig_r0
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/irq.h>
+#include <asm/unistd.h>
+#include <asm/assembler.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/segment.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/m32r.h>
+#include <asm/mmu_context.h>
+
+#if !defined(CONFIG_MMU)
+#define sys_madvise		sys_ni_syscall
+#define sys_readahead		sys_ni_syscall
+#define sys_mprotect		sys_ni_syscall
+#define sys_msync		sys_ni_syscall
+#define sys_mlock		sys_ni_syscall
+#define sys_munlock		sys_ni_syscall
+#define sys_mlockall		sys_ni_syscall
+#define sys_munlockall		sys_ni_syscall
+#define sys_mremap		sys_ni_syscall
+#define sys_mincore		sys_ni_syscall
+#define sys_remap_file_pages	sys_ni_syscall
+#endif /* CONFIG_MMU */
+
+#define R4(reg)			@reg
+#define R5(reg)			@(0x04,reg)
+#define R6(reg)			@(0x08,reg)
+#define PTREGS(reg)		@(0x0C,reg)
+#define R0(reg)			@(0x10,reg)
+#define R1(reg)			@(0x14,reg)
+#define R2(reg)			@(0x18,reg)
+#define R3(reg)			@(0x1C,reg)
+#define R7(reg)			@(0x20,reg)
+#define R8(reg)			@(0x24,reg)
+#define R9(reg)			@(0x28,reg)
+#define R10(reg)		@(0x2C,reg)
+#define R11(reg)		@(0x30,reg)
+#define R12(reg)		@(0x34,reg)
+#define SYSCALL_NR(reg)		@(0x38,reg)
+#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
+#define ACC0H(reg)		@(0x3C,reg)
+#define ACC0L(reg)		@(0x40,reg)
+#define ACC1H(reg)		@(0x44,reg)
+#define ACC1L(reg)		@(0x48,reg)
+#define PSW(reg)		@(0x4C,reg)
+#define BPC(reg)		@(0x50,reg)
+#define BBPSW(reg)		@(0x54,reg)
+#define BBPC(reg)		@(0x58,reg)
+#define SPU(reg)		@(0x5C,reg)
+#define FP(reg)			@(0x60,reg)  /* FP = R13 */
+#define LR(reg)			@(0x64,reg)
+#define SP(reg)			@(0x68,reg)
+#define ORIG_R0(reg)		@(0x6C,reg)
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+#define ACCH(reg)		@(0x3C,reg)
+#define ACCL(reg)		@(0x40,reg)
+#define PSW(reg)		@(0x44,reg)
+#define BPC(reg)		@(0x48,reg)
+#define BBPSW(reg)		@(0x4C,reg)
+#define BBPC(reg)		@(0x50,reg)
+#define SPU(reg)		@(0x54,reg)
+#define FP(reg)			@(0x58,reg)  /* FP = R13 */
+#define LR(reg)			@(0x5C,reg)
+#define SP(reg)			@(0x60,reg)
+#define ORIG_R0(reg)		@(0x64,reg)
+#else
+#error unknown isa configuration
+#endif
+
+CF_MASK		= 0x00000001
+TF_MASK		= 0x00000100
+IF_MASK		= 0x00000200
+DF_MASK		= 0x00000400
+NT_MASK		= 0x00004000
+VM_MASK		= 0x00020000
+
+#ifdef CONFIG_PREEMPT
+#define preempt_stop(x)		CLI(x)
+#else
+#define preempt_stop(x)
+#define resume_kernel		restore_all
+#endif
+
+ENTRY(ret_from_fork)
+	ld	r0, @sp+
+	bl	schedule_tail
+	GET_THREAD_INFO(r8)
+	bra	syscall_exit
+
+/*
+ * Return to user mode is not as complex as all this looks,
+ * but we want the default path for a system call return to
+ * go as quickly as possible which is why some of this is
+ * less clear than it otherwise should be.
+ */
+
+	; userspace resumption stub bypassing syscall exit tracing
+	ALIGN
+ret_from_exception:
+	preempt_stop(r4)
+ret_from_intr:
+	ld	r4, PSW(sp)
+#ifdef CONFIG_ISA_M32R2
+	and3	r4, r4, #0x8800		; check BSM and BPM bits
+#else
+	and3	r4, r4, #0x8000		; check BSM bit
+#endif
+	beqz	r4, resume_kernel
+ENTRY(resume_userspace)
+	CLI(r4)				; make sure we don't miss an interrupt
+					; setting need_resched or sigpending
+					; between sampling and the iret
+	GET_THREAD_INFO(r8)
+	ld	r9, @(TI_FLAGS, r8)
+	and3	r4, r9, #_TIF_WORK_MASK	; is there any work to be done on
+					; int/exception return?
+	bnez	r4, work_pending
+	bra	restore_all
+
+#ifdef CONFIG_PREEMPT
+ENTRY(resume_kernel)
+	GET_THREAD_INFO(r8)
+	ld	r9, @(TI_PRE_COUNT, r8)	; non-zero preempt_count ?
+	bnez	r9, restore_all
+need_resched:
+	ld	r9, @(TI_FLAGS, r8)	; need_resched set ?
+	and3	r4, r9, #_TIF_NEED_RESCHED
+	beqz	r4, restore_all
+	ld	r4, PSW(sp)		; interrupts off (exception path) ?
+	and3	r4, r4, #0x4000
+	beqz	r4, restore_all
+	LDIMM	(r4, PREEMPT_ACTIVE)
+	st	r4, @(TI_PRE_COUNT, r8)
+	STI(r4)
+	bl	schedule
+	ldi	r4, #0
+	st	r4, @(TI_PRE_COUNT, r8)
+	CLI(r4)
+	bra	need_resched
+#endif
+
+	; system call handler stub
+ENTRY(system_call)
+	SWITCH_TO_KERNEL_STACK
+	SAVE_ALL
+	STI(r4)				; Enable interrupt
+	st	sp, PTREGS(sp)		; implicit pt_regs parameter
+	cmpui	r7, #NR_syscalls
+	bnc	syscall_badsys
+	st	r7, SYSCALL_NR(sp)	; syscall_nr
+					; system call tracing in operation
+	GET_THREAD_INFO(r8)
+	ld	r9, @(TI_FLAGS, r8)
+	and3	r4, r9, #_TIF_SYSCALL_TRACE
+	bnez	r4, syscall_trace_entry
+syscall_call:
+	slli	r7, #2			; table jump for the system call
+	LDIMM	(r4, sys_call_table)
+	add	r7, r4
+	ld	r7, @r7
+	jl	r7			; execute system call
+	st	r0, R0(sp)		; save the return value
+syscall_exit:
+	CLI(r4)				; make sure we don't miss an interrupt
+					; setting need_resched or sigpending
+					; between sampling and the iret
+	ld	r9, @(TI_FLAGS, r8)
+	and3	r4, r9, #_TIF_ALLWORK_MASK	; current->work
+	bnez	r4, syscall_exit_work
+restore_all:
+	RESTORE_ALL
+
+	# perform work that needs to be done immediately before resumption
+	# r9 : frags
+	ALIGN
+work_pending:
+	and3	r4, r9, #_TIF_NEED_RESCHED
+	beqz	r4, work_notifysig
+work_resched:
+	bl	schedule
+	CLI(r4)				; make sure we don't miss an interrupt
+					; setting need_resched or sigpending
+					; between sampling and the iret
+	ld	r9, @(TI_FLAGS, r8)
+	and3	r4, r9, #_TIF_WORK_MASK	; is there any work to be done other
+					; than syscall tracing?
+	beqz	r4, restore_all
+	and3	r4, r4, #_TIF_NEED_RESCHED
+	bnez	r4, work_resched
+
+work_notifysig:				; deal with pending signals and
+					; notify-resume requests
+	mv	r0, sp			; arg1 : struct pt_regs *regs
+	ldi	r1, #0			; arg2 : sigset_t *oldset
+	mv	r2, r9			; arg3 : __u32 thread_info_flags
+	bl	do_notify_resume
+	bra	restore_all
+
+	; perform syscall exit tracing
+	ALIGN
+syscall_trace_entry:
+	ldi	r4, #-ENOSYS
+	st	r4, R0(sp)
+	bl	do_syscall_trace
+	ld	r0, ORIG_R0(sp)
+	ld	r1, R1(sp)
+	ld	r2, R2(sp)
+	ld	r3, R3(sp)
+	ld	r4, R4(sp)
+	ld	r5, R5(sp)
+	ld	r6, R6(sp)
+	ld	r7, SYSCALL_NR(sp)
+	cmpui	r7, #NR_syscalls
+	bc	syscall_call
+	bra	syscall_exit
+
+	; perform syscall exit tracing
+	ALIGN
+syscall_exit_work:
+	ld	r9, @(TI_FLAGS, r8)
+	and3	r4, r9, #_TIF_SYSCALL_TRACE
+	beqz	r4, work_pending
+	STI(r4)				; could let do_syscall_trace() call
+					; schedule() instead
+	bl	do_syscall_trace
+	bra	resume_userspace
+
+	ALIGN
+syscall_fault:
+	SAVE_ALL
+	GET_THREAD_INFO(r8)
+	ldi	r4, #-EFAULT
+	st	r4, R0(sp)
+	bra	resume_userspace
+
+	ALIGN
+syscall_badsys:
+	ldi	r4, #-ENOSYS
+	st	r4, R0(sp)
+	bra	resume_userspace
+
+	.global	eit_vector
+
+	.equ ei_vec_table, eit_vector + 0x0200
+
+/*
+ * EI handler routine
+ */
+ENTRY(ei_handler)
+#if defined(CONFIG_CHIP_M32700)
+	SWITCH_TO_KERNEL_STACK
+	; WORKAROUND: force to clear SM bit and use the kernel stack (SPI).
+#endif
+	SAVE_ALL
+	mv	r1, sp			; arg1(regs)
+#if defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_XNUX2) \
+	|| defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32102) \
+	|| defined(CONFIG_CHIP_OPSP)
+
+;    GET_ICU_STATUS;
+	seth	r0, #shigh(M32R_ICU_ISTS_ADDR)
+	ld	r0, @(low(M32R_ICU_ISTS_ADDR),r0)
+	st	r0, @-sp
+#if defined(CONFIG_SMP)
+	/*
+	 * If IRQ == 0      --> Nothing to do,  Not write IMASK
+	 * If IRQ == IPI    --> Do IPI handler, Not write IMASK
+	 * If IRQ != 0, IPI --> Do do_IRQ(),    Write IMASK
+	 */
+	slli	r0, #4
+	srli	r0, #24			; r0(irq_num<<2)
+	;; IRQ exist check
+#if defined(CONFIG_CHIP_M32700)
+	/* WORKAROUND: IMASK bug M32700-TS1, TS2 chip. */
+	beqz	r0, 3f			; if (!irq_num) goto exit
+#else
+	beqz	r0, 1f			; if (!irq_num) goto exit
+#endif	/* WORKAROUND */
+	;; IPI check
+	cmpi	r0, #(M32R_IRQ_IPI0<<2)	; ISN < IPI0 check
+	bc	2f
+	cmpi	r0, #((M32R_IRQ_IPI7+1)<<2)	; ISN > IPI7 check
+	bnc	2f
+	LDIMM	(r2, ei_vec_table)
+	add	r2, r0
+	ld	r2, @r2
+	beqz	r2, 1f			; if (no IPI handler) goto exit
+	mv	r0, r1			; arg0(regs)
+	jl	r2
+	.fillinsn
+1:
+	addi	sp, #4
+	bra	ret_to_intr
+#if defined(CONFIG_CHIP_M32700)
+	/* WORKAROUND: IMASK bug M32700-TS1, TS2 chip. */
+	.fillinsn
+3:
+	ld24	r14, #0x00070000
+	seth	r0, #shigh(M32R_ICU_IMASK_ADDR)
+	st	r14, @(low(M32R_ICU_IMASK_ADDR), r0)
+	addi	sp, #4
+	bra	ret_to_intr
+#endif	/* WORKAROUND */
+	;; do_IRQ
+	.fillinsn
+2:
+	srli	r0, #2
+#if defined(CONFIG_PLAT_USRV)
+	add3	r2, r0, #-(M32R_IRQ_INT1)	; INT1# interrupt
+	bnez	r2, 9f
+	; read ICU status register of PLD
+	seth	r0, #high(PLD_ICUISTS)
+	or3	r0, r0, #low(PLD_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27				; ISN
+	addi	r0, #(M32700UT_PLD_IRQ_BASE)
+	.fillinsn
+9:
+#elif defined(CONFIG_PLAT_M32700UT)
+	add3	r2, r0, #-(M32R_IRQ_INT1)       ; INT1# interrupt
+	bnez	r2, check_int0
+	; read ICU status register of PLD
+	seth	r0, #high(PLD_ICUISTS)
+	or3	r0, r0, #low(PLD_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27                         ; ISN
+	addi	r0, #(M32700UT_PLD_IRQ_BASE)
+	bra	check_end
+	.fillinsn
+check_int0:
+	add3	r2, r0, #-(M32R_IRQ_INT0)       ; INT0# interrupt
+	bnez	r2, check_int2
+	; read ICU status of LAN-board
+	seth	r0, #high(M32700UT_LAN_ICUISTS)
+	or3	r0, r0, #low(M32700UT_LAN_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27                         ; ISN
+	add3	r0, r0, #(M32700UT_LAN_PLD_IRQ_BASE)
+	bra	check_end
+	.fillinsn
+check_int2:
+	add3	r2, r0, #-(M32R_IRQ_INT2)       ; INT2# interrupt
+	bnez	r2, check_end
+	; read ICU status of LCD-board
+	seth	r0, #high(M32700UT_LCD_ICUISTS)
+	or3	r0, r0, #low(M32700UT_LCD_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27                         ; ISN
+	add3	r0, r0, #(M32700UT_LCD_PLD_IRQ_BASE)
+	bra	check_end
+	.fillinsn
+check_end:
+#elif defined(CONFIG_PLAT_OPSPUT)
+	add3	r2, r0, #-(M32R_IRQ_INT1)       ; INT1# interrupt
+	bnez	r2, check_int0
+	; read ICU status register of PLD
+	seth	r0, #high(PLD_ICUISTS)
+	or3	r0, r0, #low(PLD_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27                         ; ISN
+	addi	r0, #(OPSPUT_PLD_IRQ_BASE)
+	bra	check_end
+	.fillinsn
+check_int0:
+	add3	r2, r0, #-(M32R_IRQ_INT0)       ; INT0# interrupt
+	bnez	r2, check_int2
+	; read ICU status of LAN-board
+	seth	r0, #high(OPSPUT_LAN_ICUISTS)
+	or3	r0, r0, #low(OPSPUT_LAN_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27                         ; ISN
+	add3	r0, r0, #(OPSPUT_LAN_PLD_IRQ_BASE)
+	bra	check_end
+	.fillinsn
+check_int2:
+	add3	r2, r0, #-(M32R_IRQ_INT2)       ; INT2# interrupt
+	bnez	r2, check_end
+	; read ICU status of LCD-board
+	seth	r0, #high(OPSPUT_LCD_ICUISTS)
+	or3	r0, r0, #low(OPSPUT_LCD_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27                         ; ISN
+	add3	r0, r0, #(OPSPUT_LCD_PLD_IRQ_BASE)
+	bra	check_end
+	.fillinsn
+check_end:
+#endif  /* CONFIG_PLAT_OPSPUT */
+	bl	do_IRQ			; r0(irq), r1(regs)
+#else  /* not CONFIG_SMP */
+	srli	r0, #22			; r0(irq)
+#if defined(CONFIG_PLAT_USRV)
+	add3	r2, r0, #-(M32R_IRQ_INT1)	; INT1# interrupt
+	bnez	r2, 1f
+	; read ICU status register of PLD
+	seth	r0, #high(PLD_ICUISTS)
+	or3	r0, r0, #low(PLD_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27				; ISN
+	addi	r0, #(M32700UT_PLD_IRQ_BASE)
+	.fillinsn
+1:
+#elif defined(CONFIG_PLAT_M32700UT)
+	add3	r2, r0, #-(M32R_IRQ_INT1)       ; INT1# interrupt
+	bnez	r2, check_int0
+	; read ICU status register of PLD
+	seth	r0, #high(PLD_ICUISTS)
+	or3	r0, r0, #low(PLD_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27                         ; ISN
+	addi	r0, #(M32700UT_PLD_IRQ_BASE)
+	bra	check_end
+	.fillinsn
+check_int0:
+	add3	r2, r0, #-(M32R_IRQ_INT0)       ; INT0# interrupt
+	bnez	r2, check_int2
+	; read ICU status of LAN-board
+	seth	r0, #high(M32700UT_LAN_ICUISTS)
+	or3	r0, r0, #low(M32700UT_LAN_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27                         ; ISN
+	add3	r0, r0, #(M32700UT_LAN_PLD_IRQ_BASE)
+	bra	check_end
+	.fillinsn
+check_int2:
+	add3	r2, r0, #-(M32R_IRQ_INT2)       ; INT2# interrupt
+	bnez	r2, check_end
+	; read ICU status of LCD-board
+	seth	r0, #high(M32700UT_LCD_ICUISTS)
+	or3	r0, r0, #low(M32700UT_LCD_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27                         ; ISN
+	add3	r0, r0, #(M32700UT_LCD_PLD_IRQ_BASE)
+	bra	check_end
+	.fillinsn
+check_end:
+#elif defined(CONFIG_PLAT_OPSPUT)
+	add3	r2, r0, #-(M32R_IRQ_INT1)       ; INT1# interrupt
+	bnez	r2, check_int0
+	; read ICU status register of PLD
+	seth	r0, #high(PLD_ICUISTS)
+	or3	r0, r0, #low(PLD_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27                         ; ISN
+	addi	r0, #(OPSPUT_PLD_IRQ_BASE)
+	bra	check_end
+	.fillinsn
+check_int0:
+	add3	r2, r0, #-(M32R_IRQ_INT0)       ; INT0# interrupt
+	bnez	r2, check_int2
+	; read ICU status of LAN-board
+	seth	r0, #high(OPSPUT_LAN_ICUISTS)
+	or3	r0, r0, #low(OPSPUT_LAN_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27                         ; ISN
+	add3	r0, r0, #(OPSPUT_LAN_PLD_IRQ_BASE)
+	bra	check_end
+	.fillinsn
+check_int2:
+	add3	r2, r0, #-(M32R_IRQ_INT2)       ; INT2# interrupt
+	bnez	r2, check_end
+	; read ICU status of LCD-board
+	seth	r0, #high(OPSPUT_LCD_ICUISTS)
+	or3	r0, r0, #low(OPSPUT_LCD_ICUISTS)
+	lduh	r0, @r0
+	slli	r0, #21
+	srli	r0, #27                         ; ISN
+	add3	r0, r0, #(OPSPUT_LCD_PLD_IRQ_BASE)
+	bra	check_end
+	.fillinsn
+check_end:
+#endif  /* CONFIG_PLAT_OPSPUT */
+	bl	do_IRQ
+#endif  /* CONFIG_SMP */
+	ld	r14, @sp+
+	seth	r0, #shigh(M32R_ICU_IMASK_ADDR)
+	st	r14, @(low(M32R_ICU_IMASK_ADDR),r0)
+#else
+#error no chip configuration
+#endif
+ret_to_intr:
+	bra  ret_from_intr
+
+/*
+ * Default EIT handler
+ */
+	ALIGN
+int_msg:
+	.asciz  "Unknown interrupt\n"
+	.byte	0
+
+ENTRY(default_eit_handler)
+	push	r0
+	mvfc	r0, psw
+	push	r1
+	push	r2
+	push	r3
+	push	r0
+	LDIMM	(r0, __KERNEL_DS)
+	mv	r0, r1
+	mv	r0, r2
+	LDIMM	(r0, int_msg)
+	bl	printk
+	pop	r0
+	pop	r3
+	pop	r2
+	pop	r1
+	mvtc	r0, psw
+	pop	r0
+infinit:
+	bra	infinit
+
+#ifdef CONFIG_MMU
+/*
+ * Access Exception handler
+ */
+ENTRY(ace_handler)
+	SWITCH_TO_KERNEL_STACK
+	SAVE_ALL
+
+	seth	r2, #shigh(MMU_REG_BASE)	/* Check status register */
+	ld	r4, @(low(MESTS_offset),r2)
+	st	r4, @(low(MESTS_offset),r2)
+	srl3	r1, r4, #4
+#ifdef CONFIG_CHIP_M32700
+	and3	r1, r1, #0x0000ffff
+	; WORKAROUND: ignore TME bit for the M32700(TS1).
+#endif /* CONFIG_CHIP_M32700 */
+	beqz	r1, inst
+oprand:
+	ld	r2, @(low(MDEVA_offset),r2)	; set address
+	srli	r2, #12
+	slli	r2, #12
+	srli	r1, #1
+	bra	1f
+inst:
+	and3	r1, r4, #2
+	srli	r1, #1
+	or3	r1, r1, #8
+	mvfc	r2, bpc				; set address
+	.fillinsn
+1:
+	mvfc	r3, psw
+	mv	r0, sp
+	and3	r3, r3, 0x800
+	srli	r3, #9
+	or	r1, r3
+	/*
+	 * do_page_fault():
+	 *    r0 : struct pt_regs *regs
+	 *    r1 : unsigned long error-code
+	 *    r2 : unsigned long address
+	 * error-code:
+	 *    +------+------+------+------+
+	 *    | bit3 | bit2 | bit1 | bit0 |
+	 *    +------+------+------+------+
+	 *    bit 3 == 0:means data,          1:means instruction
+	 *    bit 2 == 0:means kernel,        1:means user-mode
+	 *    bit 1 == 0:means read,          1:means write
+	 *    bit 0 == 0:means no page found  1:means protection fault
+	 *
+	 */
+	bl	do_page_fault
+	bra	ret_from_intr
+#endif  /* CONFIG_MMU */
+
+
+ENTRY(alignment_check)
+/* void alignment_check(int error_code) */
+	SWITCH_TO_KERNEL_STACK
+	SAVE_ALL
+	ldi	r1, #0x30			; error_code
+	mv	r0, sp				; pt_regs
+	bl	do_alignment_check
+error_code:
+	bra	ret_from_exception
+
+ENTRY(rie_handler)
+/* void rie_handler(int error_code) */
+	SWITCH_TO_KERNEL_STACK
+	SAVE_ALL
+	mvfc	r0, bpc
+	ld	r1, @r0
+	seth	r0, #0xa0f0
+	st	r1, @r0
+	ldi	r1, #0x20			; error_code
+	mv	r0, sp				; pt_regs
+	bl	do_rie_handler
+	bra	error_code
+
+ENTRY(pie_handler)
+/* void pie_handler(int error_code) */
+	SWITCH_TO_KERNEL_STACK
+	SAVE_ALL
+	ldi	r1, #0				; error_code ; FIXME
+	mv	r0, sp				; pt_regs
+	bl	do_pie_handler
+	bra	error_code
+
+ENTRY(debug_trap)
+	.global	withdraw_debug_trap
+	/* void debug_trap(void) */
+	SWITCH_TO_KERNEL_STACK
+	SAVE_ALL
+	mv	r0, sp				; pt_regs
+	bl	withdraw_debug_trap
+	ldi	r1, #0				; error_code
+	mv	r0, sp				; pt_regs
+	bl	do_debug_trap
+	bra	error_code
+
+
+/* Cache flushing handler */
+ENTRY(cache_flushing_handler)
+	.global	_flush_cache_all
+	/* void _flush_cache_all(void); */
+	SWITCH_TO_KERNEL_STACK
+	push	r0
+	push	r1
+	push	r2
+	push	r3
+	push	r4
+	push	r5
+	push	r6
+	push	r7
+	push	lr
+	bl	_flush_cache_all
+	pop	lr
+	pop	r7
+	pop	r6
+	pop	r5
+	pop	r4
+	pop	r3
+	pop	r2
+	pop	r1
+	pop	r0
+	rte
+
+.data
+ENTRY(sys_call_table)
+	.long sys_restart_syscall	/* 0  -  old "setup()" system call*/
+	.long sys_exit
+	.long sys_fork
+	.long sys_read
+	.long sys_write
+	.long sys_open			/* 5 */
+	.long sys_close
+	.long sys_waitpid
+	.long sys_creat
+	.long sys_link
+	.long sys_unlink		/* 10 */
+	.long sys_execve
+	.long sys_chdir
+	.long sys_time
+	.long sys_mknod
+	.long sys_chmod			/* 15 */
+	.long sys_ni_syscall		/* lchown16 syscall holder */
+	.long sys_ni_syscall		/* old break syscall holder */
+	.long sys_ni_syscall		/* old stat syscall holder */
+	.long sys_lseek
+	.long sys_getpid		/* 20 */
+	.long sys_mount
+	.long sys_oldumount
+	.long sys_ni_syscall		/* setuid16 syscall holder */
+	.long sys_ni_syscall		/* getuid16 syscall holder */
+	.long sys_stime			/* 25 */
+	.long sys_ptrace
+	.long sys_alarm
+	.long sys_ni_syscall		/* old fstat syscall holder */
+	.long sys_pause
+	.long sys_utime			/* 30 */
+	.long sys_ni_syscall		/* old stty syscall holder */
+	.long sys_cachectl		/* for M32R */ /* old gtty syscall holder */
+	.long sys_access
+	.long sys_ni_syscall		/* nice	syscall holder */
+	.long sys_ni_syscall		/* 35  -  old ftime syscall holder */
+	.long sys_sync
+	.long sys_kill
+	.long sys_rename
+	.long sys_mkdir
+	.long sys_rmdir			/* 40 */
+	.long sys_dup
+	.long sys_pipe
+	.long sys_times
+	.long sys_ni_syscall		/* old prof syscall holder */
+	.long sys_brk			/* 45 */
+	.long sys_ni_syscall		/* setgid16 syscall holder */
+	.long sys_getgid		/* will be unused */
+	.long sys_ni_syscall		/* signal syscall holder */
+	.long sys_ni_syscall		/* geteuid16  syscall holder */
+	.long sys_ni_syscall		/* 50 - getegid16 syscall holder */
+	.long sys_acct
+	.long sys_umount		/* recycled never used phys() */
+	.long sys_ni_syscall		/* old lock syscall holder */
+	.long sys_ioctl
+	.long sys_fcntl			/* 55 - will be unused */
+	.long sys_ni_syscall		/* mpx syscall holder */
+	.long sys_setpgid
+	.long sys_ni_syscall		/* old ulimit syscall holder */
+	.long sys_ni_syscall		/* sys_olduname */
+	.long sys_umask			/* 60 */
+	.long sys_chroot
+	.long sys_ustat
+	.long sys_dup2
+	.long sys_getppid
+	.long sys_getpgrp		/* 65 */
+	.long sys_setsid
+	.long sys_ni_syscall		/* sigaction syscall holder */
+	.long sys_ni_syscall		/* sgetmask syscall holder */
+	.long sys_ni_syscall		/* ssetmask syscall holder */
+	.long sys_ni_syscall		/* 70 - setreuid16 syscall holder */
+	.long sys_ni_syscall		/* setregid16 syscall holder */
+	.long sys_ni_syscall		/* sigsuspend syscall holder */
+	.long sys_ni_syscall		/* sigpending syscall holder */
+	.long sys_sethostname
+	.long sys_setrlimit		/* 75 */
+	.long sys_getrlimit/*will be unused*/
+	.long sys_getrusage
+	.long sys_gettimeofday
+	.long sys_settimeofday
+	.long sys_ni_syscall		/* 80 - getgroups16 syscall holder */
+	.long sys_ni_syscall		/* setgroups16 syscall holder */
+	.long sys_ni_syscall		/* sys_oldselect */
+	.long sys_symlink
+	.long sys_ni_syscall		/* old lstat syscall holder */
+	.long sys_readlink		/* 85 */
+	.long sys_uselib
+	.long sys_swapon
+	.long sys_reboot
+	.long sys_ni_syscall		/* readdir syscall holder */
+	.long sys_ni_syscall		/* 90 - old_mmap syscall holder */
+	.long sys_munmap
+	.long sys_truncate
+	.long sys_ftruncate
+	.long sys_fchmod
+	.long sys_ni_syscall		/* 95 - fchwon16  syscall holder */
+	.long sys_getpriority
+	.long sys_setpriority
+	.long sys_ni_syscall		/* old profil syscall holder */
+	.long sys_statfs
+	.long sys_fstatfs		/* 100 */
+	.long sys_ni_syscall		/* ioperm syscall holder */
+	.long sys_socketcall
+	.long sys_syslog
+	.long sys_setitimer
+	.long sys_getitimer		/* 105 */
+	.long sys_newstat
+	.long sys_newlstat
+	.long sys_newfstat
+	.long sys_ni_syscall		/* old uname syscall holder */
+	.long sys_ni_syscall		/* 110  -  iopl syscall holder */
+	.long sys_vhangup
+	.long sys_ni_syscall		/* idle syscall holder */
+	.long sys_ni_syscall		/* vm86old syscall holder */
+	.long sys_wait4
+	.long sys_swapoff		/* 115 */
+	.long sys_sysinfo
+	.long sys_ipc
+	.long sys_fsync
+	.long sys_ni_syscall		/* sigreturn syscall holder */
+	.long sys_clone			/* 120 */
+	.long sys_setdomainname
+	.long sys_newuname
+	.long sys_ni_syscall		/* modify_ldt syscall holder */
+	.long sys_adjtimex
+	.long sys_mprotect		/* 125 */
+	.long sys_ni_syscall		/* sigprocmask syscall holder */
+	.long sys_ni_syscall		/* create_module syscall holder */
+	.long sys_init_module
+	.long sys_delete_module
+	.long sys_ni_syscall		/* 130 - get_kernel_syms */
+	.long sys_quotactl
+	.long sys_getpgid
+	.long sys_fchdir
+	.long sys_bdflush
+	.long sys_sysfs			/* 135 */
+	.long sys_personality
+	.long sys_ni_syscall		/* afs_syscall syscall holder */
+	.long sys_ni_syscall		/* setfsuid16 syscall holder */
+	.long sys_ni_syscall		/* setfsgid16 syscall holder */
+	.long sys_llseek		/* 140 */
+	.long sys_getdents
+	.long sys_select
+	.long sys_flock
+	.long sys_msync
+	.long sys_readv			/* 145 */
+	.long sys_writev
+	.long sys_getsid
+	.long sys_fdatasync
+	.long sys_sysctl
+	.long sys_mlock			/* 150 */
+	.long sys_munlock
+	.long sys_mlockall
+	.long sys_munlockall
+	.long sys_sched_setparam
+	.long sys_sched_getparam	/* 155 */
+	.long sys_sched_setscheduler
+	.long sys_sched_getscheduler
+	.long sys_sched_yield
+	.long sys_sched_get_priority_max
+	.long sys_sched_get_priority_min	/* 160 */
+	.long sys_sched_rr_get_interval
+	.long sys_nanosleep
+	.long sys_mremap
+	.long sys_ni_syscall		/* setresuid16 syscall holder */
+	.long sys_ni_syscall		/* 165 - getresuid16 syscall holder */
+	.long sys_tas			/* vm86 syscall holder */
+	.long sys_ni_syscall		/* query_module syscall holder */
+	.long sys_poll
+	.long sys_nfsservctl
+	.long sys_setresgid		/* 170 */
+	.long sys_getresgid
+	.long sys_prctl
+	.long sys_rt_sigreturn
+	.long sys_rt_sigaction
+	.long sys_rt_sigprocmask	/* 175 */
+	.long sys_rt_sigpending
+	.long sys_rt_sigtimedwait
+	.long sys_rt_sigqueueinfo
+	.long sys_rt_sigsuspend
+	.long sys_pread64		/* 180 */
+	.long sys_pwrite64
+	.long sys_ni_syscall		/* chown16 syscall holder */
+	.long sys_getcwd
+	.long sys_capget
+	.long sys_capset		/* 185 */
+	.long sys_sigaltstack
+	.long sys_sendfile
+	.long sys_ni_syscall		/* streams1 */
+	.long sys_ni_syscall		/* streams2 */
+	.long sys_vfork			/* 190 */
+	.long sys_getrlimit
+	.long sys_mmap2
+	.long sys_truncate64
+	.long sys_ftruncate64
+	.long sys_stat64		/* 195 */
+	.long sys_lstat64
+	.long sys_fstat64
+	.long sys_lchown
+	.long sys_getuid
+	.long sys_getgid		/* 200 */
+	.long sys_geteuid
+	.long sys_getegid
+	.long sys_setreuid
+	.long sys_setregid
+	.long sys_getgroups		/* 205 */
+	.long sys_setgroups
+	.long sys_fchown
+	.long sys_setresuid
+	.long sys_getresuid
+	.long sys_setresgid		/* 210 */
+	.long sys_getresgid
+	.long sys_chown
+	.long sys_setuid
+	.long sys_setgid
+	.long sys_setfsuid		/* 215 */
+	.long sys_setfsgid
+	.long sys_pivot_root
+	.long sys_mincore
+	.long sys_madvise
+	.long sys_getdents64		/* 220 */
+	.long sys_fcntl64
+	.long sys_ni_syscall		/* reserved for TUX */
+	.long sys_ni_syscall		/* Reserved for Security */
+	.long sys_gettid
+	.long sys_readahead		/* 225 */
+	.long sys_setxattr
+	.long sys_lsetxattr
+	.long sys_fsetxattr
+	.long sys_getxattr
+	.long sys_lgetxattr		/* 230 */
+	.long sys_fgetxattr
+	.long sys_listxattr
+	.long sys_llistxattr
+	.long sys_flistxattr
+	.long sys_removexattr		/* 235 */
+	.long sys_lremovexattr
+	.long sys_fremovexattr
+	.long sys_tkill
+	.long sys_sendfile64
+	.long sys_futex			/* 240 */
+	.long sys_sched_setaffinity
+	.long sys_sched_getaffinity
+	.long sys_ni_syscall		/* reserved for "set_thread_area" system call */
+	.long sys_ni_syscall		/* reserved for "get_thread_area" system call */
+	.long sys_io_setup		/* 245 */
+	.long sys_io_destroy
+	.long sys_io_getevents
+	.long sys_io_submit
+	.long sys_io_cancel
+	.long sys_fadvise64		/* 250 */
+	.long sys_ni_syscall
+	.long sys_exit_group
+	.long sys_lookup_dcookie
+	.long sys_epoll_create
+	.long sys_epoll_ctl		/* 255 */
+	.long sys_epoll_wait
+ 	.long sys_remap_file_pages
+ 	.long sys_set_tid_address
+ 	.long sys_timer_create
+ 	.long sys_timer_settime		/* 260 */
+ 	.long sys_timer_gettime
+ 	.long sys_timer_getoverrun
+ 	.long sys_timer_delete
+ 	.long sys_clock_settime
+ 	.long sys_clock_gettime		/* 265 */
+ 	.long sys_clock_getres
+ 	.long sys_clock_nanosleep
+	.long sys_statfs64
+	.long sys_fstatfs64
+	.long sys_tgkill		/* 270 */
+	.long sys_utimes
+ 	.long sys_fadvise64_64
+	.long sys_ni_syscall		/* Reserved for sys_vserver */
+        .long sys_ni_syscall		/* Reserved for sys_mbind */
+        .long sys_ni_syscall		/* Reserved for sys_get_mempolicy */
+        .long sys_ni_syscall		/* Reserved for sys_set_mempolicy */
+        .long sys_mq_open
+        .long sys_mq_unlink
+        .long sys_mq_timedsend
+        .long sys_mq_timedreceive       /* 280 */
+        .long sys_mq_notify
+        .long sys_mq_getsetattr
+        .long sys_ni_syscall            /* reserved for kexec */
+	.long sys_waitid
+
+syscall_table_size=(.-sys_call_table)
+
diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S
new file mode 100644
index 0000000..3e83173
--- /dev/null
+++ b/arch/m32r/kernel/head.S
@@ -0,0 +1,287 @@
+/*
+ *  linux/arch/m32r/kernel/head.S
+ *
+ *  M32R startup code.
+ *
+ *  Copyright (c) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
+ *                            Hitoshi Yamamoto
+ */
+
+/* $Id$ */
+
+#include <linux/init.h>
+__INIT
+__INITDATA
+
+	.text
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/assembler.h>
+#include <asm/m32r.h>
+#include <asm/mmu_context.h>
+
+/*
+ * References to members of the boot_cpu_data structure.
+ */
+	.text
+	.global	start_kernel
+	.global __bss_start
+	.global _end
+ENTRY(stext)
+ENTRY(_stext)
+ENTRY(startup_32)
+	/* Setup up the stack pointer */
+	LDIMM	(r0, spi_stack_top)
+	LDIMM	(r1, spu_stack_top)
+	mvtc	r0, spi
+	mvtc	r1, spu
+
+	/* Initilalize PSW */
+	ldi	r0, #0x0000		/* use SPI, disable EI */
+	mvtc	r0, psw
+
+	/* Set up the stack pointer */
+	LDIMM	(r0, stack_start)
+	ld	r0, @r0
+	mvtc	r0, spi
+
+/*
+ * Clear BSS first so that there are no surprises...
+ */
+#ifdef CONFIG_ISA_DUAL_ISSUE
+
+	LDIMM	(r2, __bss_start)
+	LDIMM	(r3, _end)
+	sub	r3, r2		; BSS size in bytes
+	; R4 = BSS size in longwords (rounded down)
+	mv	r4, r3		    ||	ldi	r1, #0
+	srli	r4, #4		    ||	addi	r2, #-4
+	beqz	r4, .Lendloop1
+.Lloop1:
+#ifndef CONFIG_CHIP_M32310
+	; Touch memory for the no-write-allocating cache.
+	ld	r0, @(4,r2)
+#endif
+	st	r1, @+r2	    ||	addi	r4, #-1
+	st	r1, @+r2
+	st	r1, @+r2
+	st	r1, @+r2	    ||	cmpeq	r1, r4	; R4 = 0?
+	bnc	.Lloop1
+.Lendloop1:
+	and3	r4, r3, #15
+	addi	r2, #4
+	beqz	r4, .Lendloop2
+.Lloop2:
+	stb	r1, @r2		    ||	addi	r4, #-1
+	addi	r2, #1
+	bnez	r4, .Lloop2
+.Lendloop2:
+
+#else /* not CONFIG_ISA_DUAL_ISSUE */
+
+	LDIMM	(r2, __bss_start)
+	LDIMM	(r3, _end)
+	sub	r3, r2		; BSS size in bytes
+	mv	r4, r3
+	srli	r4, #2		; R4 = BSS size in longwords (rounded down)
+	ldi	r1, #0		; clear R1 for longwords store
+	addi	r2, #-4		; account for pre-inc store
+	beqz	r4, .Lendloop1	; any more to go?
+.Lloop1:
+	st	r1, @+r2	; yep, zero out another longword
+	addi	r4, #-1		; decrement count
+	bnez	r4, .Lloop1	; go do some more
+.Lendloop1:
+	and3	r4, r3, #3	; get no. of remaining BSS bytes to clear
+	addi	r2, #4		; account for pre-inc store
+	beqz	r4, .Lendloop2	; any more to go?
+.Lloop2:
+	stb	r1, @r2		; yep, zero out another byte
+	addi	r2, #1		; bump address
+	addi	r4, #-1		; decrement count
+	bnez	r4, .Lloop2	; go do some more
+.Lendloop2:
+
+#endif /* not CONFIG_ISA_DUAL_ISSUE */
+
+#if 0  /* M32R_FIXME */
+/*
+ * Copy data segment from ROM to RAM.
+ */
+	.global ROM_D, TOP_DATA, END_DATA
+
+	LDIMM	(r1, ROM_D)
+	LDIMM	(r2, TOP_DATA)
+	LDIMM	(r3, END_DATA)
+	addi	r2, #-4
+	addi	r3, #-4
+loop1:
+	ld	r0, @r1+
+	st	r0, @+r2
+	cmp	r2, r3
+	bc	loop1
+#endif /* 0 */
+
+/* Jump to kernel */
+	LDIMM	(r2, start_kernel)
+	jl	r2
+	.fillinsn
+1:
+	bra	1b		; main should never return here, but
+				; just in case, we know what happens.
+
+#ifdef CONFIG_SMP
+/*
+ * AP startup routine
+ */
+	.text
+	.global	eit_vector
+ENTRY(startup_AP)
+;; setup EVB
+	LDIMM  (r4, eit_vector)
+	mvtc   r4, cr5
+
+;; enable MMU
+	LDIMM	(r2, init_tlb)
+	jl	r2
+	seth  r4, #high(MATM)
+	or3   r4, r4, #low(MATM)
+	ldi   r5, #0x01
+	st    r5, @r4            ; Set MATM Reg(T bit ON)
+	ld    r6, @r4            ; MATM Check
+	LDIMM (r5, 1f)
+	jmp   r5                 ; enable MMU
+	nop
+	.fillinsn
+1:
+;; ISN check
+	ld    r6, @r4            ; MATM Check
+	seth  r4, #high(M32R_ICU_ISTS_ADDR)
+	or3   r4, r4, #low(M32R_ICU_ISTS_ADDR)
+	ld    r5, @r4		; Read ISTSi reg.
+	mv    r6, r5
+	slli  r5, #13  ; PIML check
+	srli  r5, #13  ;
+	seth  r4, #high(M32R_ICU_IMASK_ADDR)
+	or3   r4, r4, #low(M32R_ICU_IMASK_ADDR)
+	st    r5, @r4		; Write IMASKi reg.
+	slli  r6, #4   ; ISN check
+	srli  r6, #26  ;
+	seth  r4, #high(M32R_IRQ_IPI5)
+	or3   r4, r4, #low(M32R_IRQ_IPI5)
+	bne   r4, r6, 2f  ; if (ISN != CPU_BOOT_IPI) goto sleep;
+
+;; check cpu_bootout_map and set cpu_bootin_map
+	LDIMM (r4, cpu_bootout_map)
+	ld    r4, @r4
+	seth  r5, #high(M32R_CPUID_PORTL)
+	or3   r5, r5, #low(M32R_CPUID_PORTL)
+	ld    r5, @r5
+	ldi   r6, #1
+	sll   r6, r5
+	and   r4, r6
+	beqz  r4, 2f
+	LDIMM (r4, cpu_bootin_map)
+	ld    r5, @r4
+	or    r5, r6
+	st    r6, @r4
+
+;; clear PSW
+	ldi   r4, #0
+	mvtc  r4, psw
+
+;; setup SPI
+	LDIMM (r4, stack_start)
+	ld    r4, @r4
+	mvtc  r4, spi
+
+;; setup BPC (start_secondary)
+	LDIMM (r4, start_secondary)
+	mvtc  r4, bpc
+
+	rte  ; goto startup_secondary
+	nop
+	nop
+
+	.fillinsn
+2:
+	;; disable MMU
+	seth  r4, #high(MATM)
+	or3   r4, r4, #low(MATM)
+	ldi   r5, #0
+    	st    r5, @r4            ; Set MATM Reg(T bit OFF)
+    	ld    r6, @r4            ; MATM Check
+	LDIMM (r4, 3f)
+	seth  r5, #high(__PAGE_OFFSET)
+	or3   r5, r5, #low(__PAGE_OFFSET)
+	not   r5, r5
+	and   r4, r5
+	jmp   r4                 ; disable MMU
+	nop
+	.fillinsn
+3:
+	;; SLEEP and wait IPI
+	LDIMM (r4, AP_loop)
+	seth  r5, #high(__PAGE_OFFSET)
+	or3   r5, r5, #low(__PAGE_OFFSET)
+	not   r5, r5
+	and   r4, r5
+	jmp   r4
+	nop
+	nop
+#endif  /* CONFIG_SMP */
+
+ENTRY(stack_start)
+	.long	init_thread_union+8192
+	.long	__KERNEL_DS
+
+/*
+ * This is initialized to create a identity-mapping at 0-4M (for bootup
+ * purposes) and another mapping of the 0-4M area at virtual address
+ * PAGE_OFFSET.
+ */
+	.text
+
+#define  MOUNT_ROOT_RDONLY    1
+#define  RAMDISK_FLAGS        0		; 1024KB
+#define  ORIG_ROOT_DEV        0x0100	; /dev/ram0 (major:01, minor:00)
+#define  LOADER_TYPE          1		; (??? - non-zero value seems
+					; to be needed to boot from initrd)
+
+#define  COMMAND_LINE ""
+
+	.section	.empty_zero_page, "aw"
+ENTRY(empty_zero_page)
+	.long	MOUNT_ROOT_RDONLY		/* offset: +0x00 */
+	.long	RAMDISK_FLAGS
+	.long	ORIG_ROOT_DEV
+	.long	LOADER_TYPE
+	.long	0	/* INITRD_START */	/* +0x10 */
+	.long	0	/* INITRD_SIZE */
+	.long	0	/* CPU_CLOCK */
+	.long	0	/* BUS_CLOCK */
+	.long	0	/* TIMER_DIVIDE */	/* +0x20 */
+	.balign	256,0
+	.asciz	COMMAND_LINE
+  	.byte	0
+	.balign	4096,0,4096
+
+/*------------------------------------------------------------------------
+ * Stack area
+ */
+	.section .spi
+	ALIGN
+	.global spi_stack_top
+	.zero	1024
+spi_stack_top:
+
+	.section .spu
+	ALIGN
+	.global spu_stack_top
+	.zero	1024
+spu_stack_top:
+
+	.end
diff --git a/arch/m32r/kernel/init_task.c b/arch/m32r/kernel/init_task.c
new file mode 100644
index 0000000..9e508fd
--- /dev/null
+++ b/arch/m32r/kernel/init_task.c
@@ -0,0 +1,41 @@
+/* orig : i386 init_task.c */
+
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+#include <linux/mqueue.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+
+EXPORT_SYMBOL(init_mm);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is 8192-byte aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union
+	__attribute__((__section__(".data.init_task"))) =
+		{ INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+
+EXPORT_SYMBOL(init_task);
+
diff --git a/arch/m32r/kernel/io_m32700ut.c b/arch/m32r/kernel/io_m32700ut.c
new file mode 100644
index 0000000..371ba904
--- /dev/null
+++ b/arch/m32r/kernel/io_m32700ut.c
@@ -0,0 +1,472 @@
+/*
+ *  linux/arch/m32r/kernel/io_m32700ut.c
+ *
+ *  Typical I/O routines for M32700UT board.
+ *
+ *  Copyright (c) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
+ *                            Hitoshi Yamamoto, Takeo Takahashi
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file "COPYING" in the main directory of this
+ *  archive for more details.
+ */
+
+#include <linux/config.h>
+#include <asm/m32r.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+#include <linux/types.h>
+
+#define M32R_PCC_IOMAP_SIZE 0x1000
+
+#define M32R_PCC_IOSTART0 0x1000
+#define M32R_PCC_IOEND0   (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1)
+
+extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int);
+extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int);
+extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int);
+extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int);
+#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */
+
+#define PORT2ADDR(port)		_port2addr(port)
+#define PORT2ADDR_USB(port)	_port2addr_usb(port)
+
+static inline void *_port2addr(unsigned long port)
+{
+	return (void *)(port + NONCACHE_OFFSET);
+}
+
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+static inline void *__port2addr_ata(unsigned long port)
+{
+	static int	dummy_reg;
+
+	switch (port) {
+	case 0x1f0:	return (void *)0xac002000;
+	case 0x1f1:	return (void *)0xac012800;
+	case 0x1f2:	return (void *)0xac012002;
+	case 0x1f3:	return (void *)0xac012802;
+	case 0x1f4:	return (void *)0xac012004;
+	case 0x1f5:	return (void *)0xac012804;
+	case 0x1f6:	return (void *)0xac012006;
+	case 0x1f7:	return (void *)0xac012806;
+	case 0x3f6:	return (void *)0xac01200e;
+	default: 	return (void *)&dummy_reg;
+	}
+}
+#endif
+
+/*
+ * M32700UT-LAN is located in the extended bus space
+ * from 0x10000000 to 0x13ffffff on physical address.
+ * The base address of LAN controller(LAN91C111) is 0x300.
+ */
+#define LAN_IOSTART	0x300
+#define LAN_IOEND	0x320
+static inline void *_port2addr_ne(unsigned long port)
+{
+	return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+}
+static inline void *_port2addr_usb(unsigned long port)
+{
+	return (void *)((port & 0x0f) + NONCACHE_OFFSET + 0x10303000);
+}
+
+static inline void delay(void)
+{
+	__asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory");
+}
+
+/*
+ * NIC I/O function
+ */
+
+#define PORT2ADDR_NE(port)  _port2addr_ne(port)
+
+static inline unsigned char _ne_inb(void *portp)
+{
+	return *(volatile unsigned char *)portp;
+}
+
+static inline unsigned short _ne_inw(void *portp)
+{
+	return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp);
+}
+
+static inline void _ne_insb(void *portp, void *addr, unsigned long count)
+{
+	unsigned char *buf = (unsigned char *)addr;
+
+	while (count--)
+		*buf++ = _ne_inb(portp);
+}
+
+static inline void _ne_outb(unsigned char b, void *portp)
+{
+	*(volatile unsigned char *)portp = b;
+}
+
+static inline void _ne_outw(unsigned short w, void *portp)
+{
+	*(volatile unsigned short *)portp = cpu_to_le16(w);
+}
+
+unsigned char _inb(unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		return _ne_inb(PORT2ADDR_NE(port));
+
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		return *(volatile unsigned char *)__port2addr_ata(port);
+	}
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned char b;
+		pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0);
+		return b;
+	} else
+#endif
+
+	return *(volatile unsigned char *)PORT2ADDR(port);
+}
+
+unsigned short _inw(unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		return _ne_inw(PORT2ADDR_NE(port));
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		return *(volatile unsigned short *)__port2addr_ata(port);
+	}
+#endif
+#if defined(CONFIG_USB)
+	else if(port >= 0x340 && port < 0x3a0)
+		return *(volatile unsigned short *)PORT2ADDR_USB(port);
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned short w;
+		pcc_ioread_word(0, port, &w, sizeof(w), 1, 0);
+		return w;
+	} else
+#endif
+	return *(volatile unsigned short *)PORT2ADDR(port);
+}
+
+unsigned long _inl(unsigned long port)
+{
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned long l;
+		pcc_ioread_word(0, port, &l, sizeof(l), 1, 0);
+		return l;
+	} else
+#endif
+	return *(volatile unsigned long *)PORT2ADDR(port);
+}
+
+unsigned char _inb_p(unsigned long port)
+{
+	unsigned char  v;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		v = _ne_inb(PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		return *(volatile unsigned char *)__port2addr_ata(port);
+	} else
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned char b;
+		pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0);
+		return b;
+	} else
+#endif
+		v = *(volatile unsigned char *)PORT2ADDR(port);
+
+	delay();
+	return (v);
+}
+
+unsigned short _inw_p(unsigned long port)
+{
+	unsigned short  v;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		v = _ne_inw(PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		return *(volatile unsigned short *)__port2addr_ata(port);
+	} else
+#endif
+#if defined(CONFIG_USB)
+	if(port >= 0x340 && port < 0x3a0)
+		return *(volatile unsigned short *)PORT2ADDR_USB(port);
+	else
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned short w;
+		pcc_ioread_word(0, port, &w, sizeof(w), 1, 0);
+		return w;
+	} else
+#endif
+		v = *(volatile unsigned short *)PORT2ADDR(port);
+
+	delay();
+	return (v);
+}
+
+unsigned long _inl_p(unsigned long port)
+{
+	unsigned long  v;
+
+	v = *(volatile unsigned long *)PORT2ADDR(port);
+	delay();
+	return (v);
+}
+
+void _outb(unsigned char b, unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_outb(b, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		*(volatile unsigned char *)__port2addr_ata(port) = b;
+	} else
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0);
+	} else
+#endif
+		*(volatile unsigned char *)PORT2ADDR(port) = b;
+}
+
+void _outw(unsigned short w, unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_outw(w, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		*(volatile unsigned short *)__port2addr_ata(port) = w;
+	} else
+#endif
+#if defined(CONFIG_USB)
+	if(port >= 0x340 && port < 0x3a0)
+		*(volatile unsigned short *)PORT2ADDR_USB(port) = w;
+	else
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0);
+	} else
+#endif
+		*(volatile unsigned short *)PORT2ADDR(port) = w;
+}
+
+void _outl(unsigned long l, unsigned long port)
+{
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0);
+	} else
+#endif
+	*(volatile unsigned long *)PORT2ADDR(port) = l;
+}
+
+void _outb_p(unsigned char b, unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_outb(b, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		*(volatile unsigned char *)__port2addr_ata(port) = b;
+	} else
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0);
+	} else
+#endif
+		*(volatile unsigned char *)PORT2ADDR(port) = b;
+
+	delay();
+}
+
+void _outw_p(unsigned short w, unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_outw(w, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		*(volatile unsigned short *)__port2addr_ata(port) = w;
+	} else
+#endif
+#if defined(CONFIG_USB)
+	if(port >= 0x340 && port < 0x3a0)
+		*(volatile unsigned short *)PORT2ADDR_USB(port) = w;
+	else
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0);
+	} else
+#endif
+		*(volatile unsigned short *)PORT2ADDR(port) = w;
+
+	delay();
+}
+
+void _outl_p(unsigned long l, unsigned long port)
+{
+	*(volatile unsigned long *)PORT2ADDR(port) = l;
+	delay();
+}
+
+void _insb(unsigned int port, void *addr, unsigned long count)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_insb(PORT2ADDR_NE(port), addr, count);
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		unsigned char *buf = addr;
+		unsigned char *portp = __port2addr_ata(port);
+		while (count--)
+			*buf++ = *(volatile unsigned char *)portp;
+	}
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char),
+				count, 1);
+	}
+#endif
+	else {
+		unsigned char *buf = addr;
+		unsigned char *portp = PORT2ADDR(port);
+		while (count--)
+			*buf++ = *(volatile unsigned char *)portp;
+	}
+}
+
+void _insw(unsigned int port, void *addr, unsigned long count)
+{
+	unsigned short *buf = addr;
+	unsigned short *portp;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND) {
+		/*
+		 * This portion is only used by smc91111.c to read data
+		 * from the DATA_REG. Do not swap the data.
+		 */
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			*buf++ = *(volatile unsigned short *)portp;
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short),
+				count, 1);
+#endif
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		portp = __port2addr_ata(port);
+		while (count--)
+			*buf++ = *(volatile unsigned short *)portp;
+#endif
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*buf++ = *(volatile unsigned short *)portp;
+	}
+}
+
+void _insl(unsigned int port, void *addr, unsigned long count)
+{
+	unsigned long *buf = addr;
+	unsigned long *portp;
+
+	portp = PORT2ADDR(port);
+	while (count--)
+		*buf++ = *(volatile unsigned long *)portp;
+}
+
+void _outsb(unsigned int port, const void *addr, unsigned long count)
+{
+	const unsigned char *buf = addr;
+	unsigned char *portp;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND) {
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			_ne_outb(*buf++, portp);
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		portp = __port2addr_ata(port);
+		while (count--)
+			*(volatile unsigned char *)portp = *buf++;
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char),
+				 count, 1);
+#endif
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*(volatile unsigned char *)portp = *buf++;
+	}
+}
+
+void _outsw(unsigned int port, const void *addr, unsigned long count)
+{
+	const unsigned short *buf = addr;
+	unsigned short *portp;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND) {
+		/*
+		 * This portion is only used by smc91111.c to write data
+		 * into the DATA_REG. Do not swap the data.
+		 */
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			*(volatile unsigned short *)portp = *buf++;
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		portp = __port2addr_ata(port);
+		while (count--)
+			*(volatile unsigned short *)portp = *buf++;
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short),
+				 count, 1);
+#endif
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*(volatile unsigned short *)portp = *buf++;
+	}
+}
+
+void _outsl(unsigned int port, const void *addr, unsigned long count)
+{
+	const unsigned long *buf = addr;
+	unsigned char *portp;
+
+	portp = PORT2ADDR(port);
+	while (count--)
+		*(volatile unsigned long *)portp = *buf++;
+}
diff --git a/arch/m32r/kernel/io_mappi.c b/arch/m32r/kernel/io_mappi.c
new file mode 100644
index 0000000..85688ff
--- /dev/null
+++ b/arch/m32r/kernel/io_mappi.c
@@ -0,0 +1,384 @@
+/*
+ *  linux/arch/m32r/kernel/io_mappi.c
+ *
+ *  Typical I/O routines for Mappi board.
+ *
+ *  Copyright (c) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
+ *                            Hitoshi Yamamoto
+ */
+
+#include <linux/config.h>
+#include <asm/m32r.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+#include <linux/types.h>
+
+#define M32R_PCC_IOMAP_SIZE 0x1000
+
+#define M32R_PCC_IOSTART0 0x1000
+#define M32R_PCC_IOEND0   (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1)
+#define M32R_PCC_IOSTART1 0x2000
+#define M32R_PCC_IOEND1   (M32R_PCC_IOSTART1 + M32R_PCC_IOMAP_SIZE - 1)
+
+extern void pcc_ioread(int, unsigned long, void *, size_t, size_t, int);
+extern void pcc_iowrite(int, unsigned long, void *, size_t, size_t, int);
+#endif /* CONFIG_PCMCIA && CONFIG_M32R_PCC */
+
+#define PORT2ADDR(port)  _port2addr(port)
+
+static inline void *_port2addr(unsigned long port)
+{
+	return (void *)(port + NONCACHE_OFFSET);
+}
+
+static inline void *_port2addr_ne(unsigned long port)
+{
+	return (void *)((port<<1) + NONCACHE_OFFSET + 0x0C000000);
+}
+
+static inline void delay(void)
+{
+	__asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory");
+}
+
+/*
+ * NIC I/O function
+ */
+
+#define PORT2ADDR_NE(port)  _port2addr_ne(port)
+
+static inline unsigned char _ne_inb(void *portp)
+{
+	return (unsigned char) *(volatile unsigned short *)portp;
+}
+
+static inline unsigned short _ne_inw(void *portp)
+{
+	unsigned short tmp;
+
+	tmp = *(volatile unsigned short *)portp;
+	return le16_to_cpu(tmp);
+}
+
+static inline void _ne_outb(unsigned char b, void *portp)
+{
+	*(volatile unsigned short *)portp = (unsigned short)b;
+}
+
+static inline void _ne_outw(unsigned short w, void *portp)
+{
+	*(volatile unsigned short *)portp = cpu_to_le16(w);
+}
+
+unsigned char _inb(unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320)
+		return _ne_inb(PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+        if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned char b;
+		pcc_ioread(0, port, &b, sizeof(b), 1, 0);
+		return b;
+	} else 	if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		unsigned char b;
+		pcc_ioread(1, port, &b, sizeof(b), 1, 0);
+		return b;
+	} else
+#endif
+
+	return *(volatile unsigned char *)PORT2ADDR(port);
+}
+
+unsigned short _inw(unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320)
+		return _ne_inw(PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned short w;
+		pcc_ioread(0, port, &w, sizeof(w), 1, 0);
+		return w;
+	} else 	if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		unsigned short w;
+		pcc_ioread(1, port, &w, sizeof(w), 1, 0);
+		return w;
+	} else
+#endif
+	return *(volatile unsigned short *)PORT2ADDR(port);
+}
+
+unsigned long _inl(unsigned long port)
+{
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned long l;
+		pcc_ioread(0, port, &l, sizeof(l), 1, 0);
+		return l;
+	} else 	if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		unsigned short l;
+		pcc_ioread(1, port, &l, sizeof(l), 1, 0);
+		return l;
+	} else
+#endif
+	return *(volatile unsigned long *)PORT2ADDR(port);
+}
+
+unsigned char _inb_p(unsigned long port)
+{
+	unsigned char  v;
+
+	if (port >= 0x300 && port < 0x320)
+		v = _ne_inb(PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned char b;
+		pcc_ioread(0, port, &b, sizeof(b), 1, 0);
+		return b;
+	} else 	if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		unsigned char b;
+		pcc_ioread(1, port, &b, sizeof(b), 1, 0);
+		return b;
+	} else
+#endif
+		v = *(volatile unsigned char *)PORT2ADDR(port);
+
+	delay();
+	return (v);
+}
+
+unsigned short _inw_p(unsigned long port)
+{
+	unsigned short  v;
+
+	if (port >= 0x300 && port < 0x320)
+		v = _ne_inw(PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned short w;
+		pcc_ioread(0, port, &w, sizeof(w), 1, 0);
+		return w;
+	} else 	if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		unsigned short w;
+		pcc_ioread(1, port, &w, sizeof(w), 1, 0);
+		return w;
+	} else
+#endif
+		v = *(volatile unsigned short *)PORT2ADDR(port);
+
+	delay();
+	return (v);
+}
+
+unsigned long _inl_p(unsigned long port)
+{
+	unsigned long  v;
+
+	v = *(volatile unsigned long *)PORT2ADDR(port);
+	delay();
+	return (v);
+}
+
+void _outb(unsigned char b, unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320)
+		_ne_outb(b, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite(0, port, &b, sizeof(b), 1, 0);
+	} else 	if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		pcc_iowrite(1, port, &b, sizeof(b), 1, 0);
+	} else
+#endif
+		*(volatile unsigned char *)PORT2ADDR(port) = b;
+}
+
+void _outw(unsigned short w, unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320)
+		_ne_outw(w, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite(0, port, &w, sizeof(w), 1, 0);
+	} else 	if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		pcc_iowrite(1, port, &w, sizeof(w), 1, 0);
+	} else
+#endif
+		*(volatile unsigned short *)PORT2ADDR(port) = w;
+}
+
+void _outl(unsigned long l, unsigned long port)
+{
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite(0, port, &l, sizeof(l), 1, 0);
+	} else 	if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		pcc_iowrite(1, port, &l, sizeof(l), 1, 0);
+	} else
+#endif
+	*(volatile unsigned long *)PORT2ADDR(port) = l;
+}
+
+void _outb_p(unsigned char b, unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320)
+		_ne_outb(b, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite(0, port, &b, sizeof(b), 1, 0);
+	} else 	if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		pcc_iowrite(1, port, &b, sizeof(b), 1, 0);
+	} else
+#endif
+		*(volatile unsigned char *)PORT2ADDR(port) = b;
+
+	delay();
+}
+
+void _outw_p(unsigned short w, unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320)
+		_ne_outw(w, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite(0, port, &w, sizeof(w), 1, 0);
+	} else 	if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		pcc_iowrite(1, port, &w, sizeof(w), 1, 0);
+	} else
+#endif
+		*(volatile unsigned short *)PORT2ADDR(port) = w;
+
+	delay();
+}
+
+void _outl_p(unsigned long l, unsigned long port)
+{
+	*(volatile unsigned long *)PORT2ADDR(port) = l;
+	delay();
+}
+
+void _insb(unsigned int port, void *addr, unsigned long count)
+{
+	unsigned short *buf = addr;
+	unsigned short *portp;
+
+	if (port >= 0x300 && port < 0x320){
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			*buf++ = *(volatile unsigned char *)portp;
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_ioread(0, port, (void *)addr, sizeof(unsigned char),
+			   count, 1);
+	} else 	if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		pcc_ioread(1, port, (void *)addr, sizeof(unsigned char),
+			   count, 1);
+#endif
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*buf++ = *(volatile unsigned char *)portp;
+	}
+}
+
+void _insw(unsigned int port, void *addr, unsigned long count)
+{
+	unsigned short *buf = addr;
+	unsigned short *portp;
+
+	if (port >= 0x300 && port < 0x320) {
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			*buf++ = _ne_inw(portp);
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_ioread(0, port, (void *)addr, sizeof(unsigned short),
+			   count, 1);
+	} else 	if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		pcc_ioread(1, port, (void *)addr, sizeof(unsigned short),
+			   count, 1);
+#endif
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*buf++ = *(volatile unsigned short *)portp;
+	}
+}
+
+void _insl(unsigned int port, void *addr, unsigned long count)
+{
+	unsigned long *buf = addr;
+	unsigned long *portp;
+
+	portp = PORT2ADDR(port);
+	while (count--)
+		*buf++ = *(volatile unsigned long *)portp;
+}
+
+void _outsb(unsigned int port, const void *addr, unsigned long count)
+{
+	const unsigned char *buf = addr;
+	unsigned char *portp;
+
+	if (port >= 0x300 && port < 0x320) {
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			_ne_outb(*buf++, portp);
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite(0, port, (void *)addr, sizeof(unsigned char),
+			    count, 1);
+	} else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		pcc_iowrite(1, port, (void *)addr, sizeof(unsigned char),
+			    count, 1);
+#endif
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*(volatile unsigned char *)portp = *buf++;
+	}
+}
+
+void _outsw(unsigned int port, const void *addr, unsigned long count)
+{
+	const unsigned short *buf = addr;
+	unsigned short *portp;
+
+	if (port >= 0x300 && port < 0x320) {
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			_ne_outw(*buf++, portp);
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC)
+	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite(0, port, (void *)addr, sizeof(unsigned short),
+			    count, 1);
+	} else 	if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) {
+		pcc_iowrite(1, port, (void *)addr, sizeof(unsigned short),
+			    count, 1);
+#endif
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*(volatile unsigned short *)portp = *buf++;
+	}
+}
+
+void _outsl(unsigned int port, const void *addr, unsigned long count)
+{
+	const unsigned long *buf = addr;
+	unsigned char *portp;
+
+	portp = PORT2ADDR(port);
+	while (count--)
+		*(volatile unsigned long *)portp = *buf++;
+}
diff --git a/arch/m32r/kernel/io_mappi2.c b/arch/m32r/kernel/io_mappi2.c
new file mode 100644
index 0000000..4182cd4
--- /dev/null
+++ b/arch/m32r/kernel/io_mappi2.c
@@ -0,0 +1,461 @@
+/*
+ *  linux/arch/m32r/kernel/io_mappi2.c
+ *
+ *  Typical I/O routines for Mappi2 board.
+ *
+ *  Copyright (c) 2001-2003  Hiroyuki Kondo, Hirokazu Takata,
+ *                           Hitoshi Yamamoto, Mamoru Sakugawa
+ */
+
+#include <linux/config.h>
+#include <asm/m32r.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+#include <linux/types.h>
+
+#define M32R_PCC_IOMAP_SIZE 0x1000
+
+#define M32R_PCC_IOSTART0 0x1000
+#define M32R_PCC_IOEND0   (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1)
+
+extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int);
+extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int);
+extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int);
+extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int);
+#endif /* CONFIG_PCMCIA && CONFIG_MAPPI2_CFC */
+
+#define PORT2ADDR(port)      _port2addr(port)
+#define PORT2ADDR_NE(port)   _port2addr_ne(port)
+#define PORT2ADDR_USB(port)  _port2addr_usb(port)
+
+static inline void *_port2addr(unsigned long port)
+{
+	return (void *)(port + NONCACHE_OFFSET);
+}
+
+#define LAN_IOSTART	0x300
+#define LAN_IOEND	0x320
+
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+static inline void *__port2addr_ata(unsigned long port)
+{
+	static int	dummy_reg;
+
+	switch (port) {
+	case 0x1f0:	return (void *)0xac002000;
+	case 0x1f1:	return (void *)0xac012800;
+	case 0x1f2:	return (void *)0xac012002;
+	case 0x1f3:	return (void *)0xac012802;
+	case 0x1f4:	return (void *)0xac012004;
+	case 0x1f5:	return (void *)0xac012804;
+	case 0x1f6:	return (void *)0xac012006;
+	case 0x1f7:	return (void *)0xac012806;
+	case 0x3f6:	return (void *)0xac01200e;
+	default: 	return (void *)&dummy_reg;
+	}
+}
+#endif
+
+#ifdef CONFIG_CHIP_OPSP
+static inline void *_port2addr_ne(unsigned long port)
+{
+	return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+}
+#else
+static inline void *_port2addr_ne(unsigned long port)
+{
+	return (void *)(port + NONCACHE_OFFSET + 0x04000000);
+}
+#endif
+static inline void *_port2addr_usb(unsigned long port)
+{
+	return (void *)(port + NONCACHE_OFFSET + 0x14000000);
+}
+static inline void delay(void)
+{
+	__asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory");
+}
+
+/*
+ * NIC I/O function
+ */
+
+static inline unsigned char _ne_inb(void *portp)
+{
+	return (unsigned char) *(volatile unsigned char *)portp;
+}
+
+static inline unsigned short _ne_inw(void *portp)
+{
+	return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp);
+}
+
+static inline void _ne_insb(void *portp, void * addr, unsigned long count)
+{
+	unsigned char *buf = addr;
+
+	while (count--)
+		*buf++ = *(volatile unsigned char *)portp;
+}
+
+static inline void _ne_outb(unsigned char b, void *portp)
+{
+	*(volatile unsigned char *)portp = (unsigned char)b;
+}
+
+static inline void _ne_outw(unsigned short w, void *portp)
+{
+	*(volatile unsigned short *)portp = cpu_to_le16(w);
+}
+
+unsigned char _inb(unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		return _ne_inb(PORT2ADDR_NE(port));
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		return *(volatile unsigned char *)__port2addr_ata(port);
+	}
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned char b;
+		pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0);
+		return b;
+	} else
+#endif
+
+	return *(volatile unsigned char *)PORT2ADDR(port);
+}
+
+unsigned short _inw(unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		return _ne_inw(PORT2ADDR_NE(port));
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		return *(volatile unsigned short *)__port2addr_ata(port);
+	}
+#endif
+#if defined(CONFIG_USB)
+	else if (port >= 0x340 && port < 0x3a0)
+		return *(volatile unsigned short *)PORT2ADDR_USB(port);
+#endif
+
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned short w;
+		pcc_ioread_word(0, port, &w, sizeof(w), 1, 0);
+		return w;
+	} else
+#endif
+	return *(volatile unsigned short *)PORT2ADDR(port);
+}
+
+unsigned long _inl(unsigned long port)
+{
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned long l;
+		pcc_ioread_word(0, port, &l, sizeof(l), 1, 0);
+		return l;
+	} else
+#endif
+	return *(volatile unsigned long *)PORT2ADDR(port);
+}
+
+unsigned char _inb_p(unsigned long port)
+{
+	unsigned char  v;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		v = _ne_inb(PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		return *(volatile unsigned char *)__port2addr_ata(port);
+	} else
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned char b;
+		pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0);
+		return b;
+	} else
+#endif
+		v = *(volatile unsigned char *)PORT2ADDR(port);
+
+	delay();
+	return (v);
+}
+
+unsigned short _inw_p(unsigned long port)
+{
+	unsigned short  v;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		v = _ne_inw(PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		return *(volatile unsigned short *)__port2addr_ata(port);
+	} else
+#endif
+#if defined(CONFIG_USB)
+	if (port >= 0x340 && port < 0x3a0)
+		v = *(volatile unsigned short *)PORT2ADDR_USB(port);
+	else
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned short w;
+		pcc_ioread_word(0, port, &w, sizeof(w), 1, 0);
+		return w;
+	} else
+#endif
+		v = *(volatile unsigned short *)PORT2ADDR(port);
+
+	delay();
+	return (v);
+}
+
+unsigned long _inl_p(unsigned long port)
+{
+	unsigned long  v;
+
+	v = *(volatile unsigned long *)PORT2ADDR(port);
+	delay();
+	return (v);
+}
+
+void _outb(unsigned char b, unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_outb(b, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		*(volatile unsigned char *)__port2addr_ata(port) = b;
+	} else
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0);
+	} else
+#endif
+		*(volatile unsigned char *)PORT2ADDR(port) = b;
+}
+
+void _outw(unsigned short w, unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_outw(w, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		*(volatile unsigned short *)__port2addr_ata(port) = w;
+	} else
+#endif
+#if defined(CONFIG_USB)
+	if (port >= 0x340 && port < 0x3a0)
+		*(volatile unsigned short *)PORT2ADDR_USB(port) = w;
+	else
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0);
+	} else
+#endif
+		*(volatile unsigned short *)PORT2ADDR(port) = w;
+}
+
+void _outl(unsigned long l, unsigned long port)
+{
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0);
+	} else
+#endif
+	*(volatile unsigned long *)PORT2ADDR(port) = l;
+}
+
+void _outb_p(unsigned char b, unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_outb(b, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		*(volatile unsigned char *)__port2addr_ata(port) = b;
+	} else
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0);
+	} else
+#endif
+		*(volatile unsigned char *)PORT2ADDR(port) = b;
+
+	delay();
+}
+
+void _outw_p(unsigned short w, unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_outw(w, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		*(volatile unsigned short *)__port2addr_ata(port) = w;
+	} else
+#endif
+#if defined(CONFIG_USB)
+	  if (port >= 0x340 && port < 0x3a0)
+		*(volatile unsigned short *)PORT2ADDR_USB(port) = w;
+	else
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0);
+	} else
+#endif
+		*(volatile unsigned short *)PORT2ADDR(port) = w;
+
+	delay();
+}
+
+void _outl_p(unsigned long l, unsigned long port)
+{
+	*(volatile unsigned long *)PORT2ADDR(port) = l;
+	delay();
+}
+
+void _insb(unsigned int port, void * addr, unsigned long count)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_insb(PORT2ADDR_NE(port), addr, count);
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		unsigned char *buf = addr;
+		unsigned char *portp = __port2addr_ata(port);
+		while (count--)
+			*buf++ = *(volatile unsigned char *)portp;
+	}
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char),
+				count, 1);
+	}
+#endif
+	else {
+		unsigned char *buf = addr;
+		unsigned char *portp = PORT2ADDR(port);
+		while (count--)
+			*buf++ = *(volatile unsigned char *)portp;
+	}
+}
+
+void _insw(unsigned int port, void * addr, unsigned long count)
+{
+	unsigned short *buf = addr;
+	unsigned short *portp;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND) {
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			*buf++ = *(volatile unsigned short *)portp;
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short),
+				count, 1);
+#endif
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		portp = __port2addr_ata(port);
+		while (count--)
+			*buf++ = *(volatile unsigned short *)portp;
+#endif
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*buf++ = *(volatile unsigned short *)portp;
+	}
+}
+
+void _insl(unsigned int port, void * addr, unsigned long count)
+{
+	unsigned long *buf = addr;
+	unsigned long *portp;
+
+	portp = PORT2ADDR(port);
+	while (count--)
+		*buf++ = *(volatile unsigned long *)portp;
+}
+
+void _outsb(unsigned int port, const void * addr, unsigned long count)
+{
+	const unsigned char *buf = addr;
+	unsigned char *portp;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND) {
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			_ne_outb(*buf++, portp);
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		portp = __port2addr_ata(port);
+		while (count--)
+			*(volatile unsigned char *)portp = *buf++;
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char),
+				 count, 1);
+#endif
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*(volatile unsigned char *)portp = *buf++;
+	}
+}
+
+void _outsw(unsigned int port, const void * addr, unsigned long count)
+{
+	const unsigned short *buf = addr;
+	unsigned short *portp;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND) {
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			*(volatile unsigned short *)portp = *buf++;
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+		portp = __port2addr_ata(port);
+		while (count--)
+			*(volatile unsigned short *)portp = *buf++;
+#endif
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short),
+				 count, 1);
+#endif
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*(volatile unsigned short *)portp = *buf++;
+	}
+}
+
+void _outsl(unsigned int port, const void * addr, unsigned long count)
+{
+	const unsigned long *buf = addr;
+	unsigned char *portp;
+
+	portp = PORT2ADDR(port);
+	while (count--)
+		*(volatile unsigned long *)portp = *buf++;
+}
diff --git a/arch/m32r/kernel/io_oaks32r.c b/arch/m32r/kernel/io_oaks32r.c
new file mode 100644
index 0000000..2869647
--- /dev/null
+++ b/arch/m32r/kernel/io_oaks32r.c
@@ -0,0 +1,251 @@
+/*
+ *  linux/arch/m32r/kernel/io_oaks32r.c
+ *
+ *  Typical I/O routines for OAKS32R board.
+ *
+ *  Copyright (c) 2001-2004  Hiroyuki Kondo, Hirokazu Takata,
+ *                           Hitoshi Yamamoto, Mamoru Sakugawa
+ */
+
+#include <linux/config.h>
+#include <asm/m32r.h>
+#include <asm/page.h>
+#include <asm/io.h>
+
+#define PORT2ADDR(port)  _port2addr(port)
+
+static inline void *_port2addr(unsigned long port)
+{
+	return (void *)(port + NONCACHE_OFFSET);
+}
+
+static inline  void *_port2addr_ne(unsigned long port)
+{
+	return (void *)((port<<1) + NONCACHE_OFFSET + 0x02000000);
+}
+
+static inline void delay(void)
+{
+	__asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory");
+}
+
+/*
+ * NIC I/O function
+ */
+
+#define PORT2ADDR_NE(port)  _port2addr_ne(port)
+
+static inline unsigned char _ne_inb(void *portp)
+{
+	return *(volatile unsigned char *)(portp+1);
+}
+
+static inline unsigned short _ne_inw(void *portp)
+{
+	unsigned short tmp;
+
+	tmp = *(unsigned short *)(portp) & 0xff;
+	tmp |= *(unsigned short *)(portp+2) << 8;
+	return tmp;
+}
+
+static inline  void _ne_insb(void *portp, void *addr, unsigned long count)
+{
+	unsigned char *buf = addr;
+	while (count--)
+		*buf++ = *(volatile unsigned char *)(portp+1);
+}
+
+static inline void _ne_outb(unsigned char b, void *portp)
+{
+	*(volatile unsigned char *)(portp+1) = b;
+}
+
+static inline void _ne_outw(unsigned short w, void *portp)
+{
+	*(volatile unsigned short *)portp =  (w >> 8);
+	*(volatile unsigned short *)(portp+2) =  (w & 0xff);
+}
+
+unsigned char _inb(unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320)
+		return _ne_inb(PORT2ADDR_NE(port));
+
+	return *(volatile unsigned char *)PORT2ADDR(port);
+}
+
+unsigned short _inw(unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320)
+		return _ne_inw(PORT2ADDR_NE(port));
+
+	return *(volatile unsigned short *)PORT2ADDR(port);
+}
+
+unsigned long _inl(unsigned long port)
+{
+	return *(volatile unsigned long *)PORT2ADDR(port);
+}
+
+unsigned char _inb_p(unsigned long port)
+{
+	unsigned char  v;
+
+	if (port >= 0x300 && port < 0x320)
+		v = _ne_inb(PORT2ADDR_NE(port));
+	else
+		v = *(volatile unsigned char *)PORT2ADDR(port);
+
+	delay();
+	return (v);
+}
+
+unsigned short _inw_p(unsigned long port)
+{
+	unsigned short  v;
+
+	if (port >= 0x300 && port < 0x320)
+		v = _ne_inw(PORT2ADDR_NE(port));
+	else
+		v = *(volatile unsigned short *)PORT2ADDR(port);
+
+	delay();
+	return (v);
+}
+
+unsigned long _inl_p(unsigned long port)
+{
+	unsigned long  v;
+
+	v = *(volatile unsigned long *)PORT2ADDR(port);
+	delay();
+	return (v);
+}
+
+void _outb(unsigned char b, unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320)
+		_ne_outb(b, PORT2ADDR_NE(port));
+	else
+		*(volatile unsigned char *)PORT2ADDR(port) = b;
+}
+
+void _outw(unsigned short w, unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320)
+		_ne_outw(w, PORT2ADDR_NE(port));
+	else
+		*(volatile unsigned short *)PORT2ADDR(port) = w;
+}
+
+void _outl(unsigned long l, unsigned long port)
+{
+	*(volatile unsigned long *)PORT2ADDR(port) = l;
+}
+
+void _outb_p(unsigned char b, unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320)
+		_ne_outb(b, PORT2ADDR_NE(port));
+	else
+		*(volatile unsigned char *)PORT2ADDR(port) = b;
+
+	delay();
+}
+
+void _outw_p(unsigned short w, unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320)
+		_ne_outw(w, PORT2ADDR_NE(port));
+	else
+		*(volatile unsigned short *)PORT2ADDR(port) = w;
+
+	delay();
+}
+
+void _outl_p(unsigned long l, unsigned long port)
+{
+	*(volatile unsigned long *)PORT2ADDR(port) = l;
+	delay();
+}
+
+void _insb(unsigned int port, void *addr, unsigned long count)
+{
+	if (port >= 0x300 && port < 0x320)
+		_ne_insb(PORT2ADDR_NE(port), addr, count);
+	else {
+		unsigned char *buf = addr;
+		unsigned char *portp = PORT2ADDR(port);
+		while (count--)
+			*buf++ = *(volatile unsigned char *)portp;
+	}
+}
+
+void _insw(unsigned int port, void *addr, unsigned long count)
+{
+	unsigned short *buf = addr;
+	unsigned short *portp;
+
+	if (port >= 0x300 && port < 0x320) {
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			*buf++ = _ne_inw(portp);
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*buf++ = *(volatile unsigned short *)portp;
+	}
+}
+
+void _insl(unsigned int port, void *addr, unsigned long count)
+{
+	unsigned long *buf = addr;
+	unsigned long *portp;
+
+	portp = PORT2ADDR(port);
+	while (count--)
+		*buf++ = *(volatile unsigned long *)portp;
+}
+
+void _outsb(unsigned int port, const void *addr, unsigned long count)
+{
+	const unsigned char *buf = addr;
+	unsigned char *portp;
+
+	if (port >= 0x300 && port < 0x320) {
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			_ne_outb(*buf++, portp);
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*(volatile unsigned char *)portp = *buf++;
+	}
+}
+
+void _outsw(unsigned int port, const void *addr, unsigned long count)
+{
+	const unsigned short *buf = addr;
+	unsigned short *portp;
+
+	if (port >= 0x300 && port < 0x320) {
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			_ne_outw(*buf++, portp);
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*(volatile unsigned short *)portp = *buf++;
+	}
+}
+
+void _outsl(unsigned int port, const void *addr, unsigned long count)
+{
+	const unsigned long *buf = addr;
+	unsigned char *portp;
+
+	portp = PORT2ADDR(port);
+	while (count--)
+		*(volatile unsigned long *)portp = *buf++;
+}
diff --git a/arch/m32r/kernel/io_opsput.c b/arch/m32r/kernel/io_opsput.c
new file mode 100644
index 0000000..aaf42f9
--- /dev/null
+++ b/arch/m32r/kernel/io_opsput.c
@@ -0,0 +1,390 @@
+/*
+ *  linux/arch/m32r/kernel/io_mappi.c
+ *
+ *  Typical I/O routines for OPSPUT board.
+ *
+ *  Copyright (c) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
+ *                            Hitoshi Yamamoto, Takeo Takahashi
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file "COPYING" in the main directory of this
+ *  archive for more details.
+ */
+
+#include <linux/config.h>
+#include <asm/m32r.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+#include <linux/types.h>
+
+#define M32R_PCC_IOMAP_SIZE 0x1000
+
+#define M32R_PCC_IOSTART0 0x1000
+#define M32R_PCC_IOEND0   (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1)
+
+extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int);
+extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int);
+extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int);
+extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int);
+#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */
+
+#define PORT2ADDR(port)  _port2addr(port)
+#define PORT2ADDR_USB(port) _port2addr_usb(port)
+
+static inline void *_port2addr(unsigned long port)
+{
+	return (void *)(port + NONCACHE_OFFSET);
+}
+
+/*
+ * OPSPUT-LAN is located in the extended bus space
+ * from 0x10000000 to 0x13ffffff on physical address.
+ * The base address of LAN controller(LAN91C111) is 0x300.
+ */
+#define LAN_IOSTART	0x300
+#define LAN_IOEND	0x320
+static inline void *_port2addr_ne(unsigned long port)
+{
+	return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+}
+static inline void *_port2addr_usb(unsigned long port)
+{
+	return (void *)((port & 0x0f) + NONCACHE_OFFSET + 0x10303000);
+}
+
+static inline void delay(void)
+{
+	__asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory");
+}
+
+/*
+ * NIC I/O function
+ */
+
+#define PORT2ADDR_NE(port)  _port2addr_ne(port)
+
+static inline unsigned char _ne_inb(void *portp)
+{
+	return *(volatile unsigned char *)portp;
+}
+
+static inline unsigned short _ne_inw(void *portp)
+{
+	return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp);
+}
+
+static inline void _ne_insb(void *portp, void *addr, unsigned long count)
+{
+	unsigned char *buf = (unsigned char *)addr;
+
+	while (count--)
+		*buf++ = _ne_inb(portp);
+}
+
+static inline void _ne_outb(unsigned char b, void *portp)
+{
+	*(volatile unsigned char *)portp = b;
+}
+
+static inline void _ne_outw(unsigned short w, void *portp)
+{
+	*(volatile unsigned short *)portp = cpu_to_le16(w);
+}
+
+unsigned char _inb(unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		return _ne_inb(PORT2ADDR_NE(port));
+
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned char b;
+		pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0);
+		return b;
+	} else
+#endif
+
+	return *(volatile unsigned char *)PORT2ADDR(port);
+}
+
+unsigned short _inw(unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		return _ne_inw(PORT2ADDR_NE(port));
+#if defined(CONFIG_USB)
+	else if(port >= 0x340 && port < 0x3a0)
+		return *(volatile unsigned short *)PORT2ADDR_USB(port);
+#endif
+
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned short w;
+		pcc_ioread_word(0, port, &w, sizeof(w), 1, 0);
+		return w;
+	} else
+#endif
+	return *(volatile unsigned short *)PORT2ADDR(port);
+}
+
+unsigned long _inl(unsigned long port)
+{
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned long l;
+		pcc_ioread_word(0, port, &l, sizeof(l), 1, 0);
+		return l;
+	} else
+#endif
+	return *(volatile unsigned long *)PORT2ADDR(port);
+}
+
+unsigned char _inb_p(unsigned long port)
+{
+	unsigned char  v;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		v = _ne_inb(PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned char b;
+		pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0);
+		return b;
+	} else
+#endif
+		v = *(volatile unsigned char *)PORT2ADDR(port);
+
+	delay();
+	return (v);
+}
+
+unsigned short _inw_p(unsigned long port)
+{
+	unsigned short  v;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		v = _ne_inw(PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_USB)
+	if(port >= 0x340 && port < 0x3a0)
+		return *(volatile unsigned short *)PORT2ADDR_USB(port);
+	else
+#endif
+
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		unsigned short w;
+		pcc_ioread_word(0, port, &w, sizeof(w), 1, 0);
+		return w;
+	} else
+#endif
+		v = *(volatile unsigned short *)PORT2ADDR(port);
+
+	delay();
+	return (v);
+}
+
+unsigned long _inl_p(unsigned long port)
+{
+	unsigned long  v;
+
+	v = *(volatile unsigned long *)PORT2ADDR(port);
+	delay();
+	return (v);
+}
+
+void _outb(unsigned char b, unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_outb(b, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0);
+	} else
+#endif
+		*(volatile unsigned char *)PORT2ADDR(port) = b;
+}
+
+void _outw(unsigned short w, unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_outw(w, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_USB)
+	if(port >= 0x340 && port < 0x3a0)
+		*(volatile unsigned short *)PORT2ADDR_USB(port) = w;
+	else
+#endif
+
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0);
+	} else
+#endif
+		*(volatile unsigned short *)PORT2ADDR(port) = w;
+}
+
+void _outl(unsigned long l, unsigned long port)
+{
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0);
+	} else
+#endif
+	*(volatile unsigned long *)PORT2ADDR(port) = l;
+}
+
+void _outb_p(unsigned char b, unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_outb(b, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0);
+	} else
+#endif
+		*(volatile unsigned char *)PORT2ADDR(port) = b;
+
+	delay();
+}
+
+void _outw_p(unsigned short w, unsigned long port)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_outw(w, PORT2ADDR_NE(port));
+	else
+#if defined(CONFIG_USB)
+	if(port >= 0x340 && port < 0x3a0)
+		*(volatile unsigned short *)PORT2ADDR_USB(port) = w;
+	else
+#endif
+
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0);
+	} else
+#endif
+		*(volatile unsigned short *)PORT2ADDR(port) = w;
+
+	delay();
+}
+
+void _outl_p(unsigned long l, unsigned long port)
+{
+	*(volatile unsigned long *)PORT2ADDR(port) = l;
+	delay();
+}
+
+void _insb(unsigned int port, void *addr, unsigned long count)
+{
+	if (port >= LAN_IOSTART && port < LAN_IOEND)
+		_ne_insb(PORT2ADDR_NE(port), addr, count);
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char),
+				count, 1);
+	}
+#endif
+	else {
+		unsigned char *buf = addr;
+		unsigned char *portp = PORT2ADDR(port);
+		while (count--)
+			*buf++ = *(volatile unsigned char *)portp;
+	}
+}
+
+void _insw(unsigned int port, void *addr, unsigned long count)
+{
+	unsigned short *buf = addr;
+	unsigned short *portp;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND) {
+		/*
+		 * This portion is only used by smc91111.c to read data
+		 * from the DATA_REG. Do not swap the data.
+		 */
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			*buf++ = *(volatile unsigned short *)portp;
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short),
+				count, 1);
+#endif
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*buf++ = *(volatile unsigned short *)portp;
+	}
+}
+
+void _insl(unsigned int port, void *addr, unsigned long count)
+{
+	unsigned long *buf = addr;
+	unsigned long *portp;
+
+	portp = PORT2ADDR(port);
+	while (count--)
+		*buf++ = *(volatile unsigned long *)portp;
+}
+
+void _outsb(unsigned int port, const void *addr, unsigned long count)
+{
+	const unsigned char *buf = addr;
+	unsigned char *portp;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND) {
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			_ne_outb(*buf++, portp);
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char),
+				 count, 1);
+#endif
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*(volatile unsigned char *)portp = *buf++;
+	}
+}
+
+void _outsw(unsigned int port, const void *addr, unsigned long count)
+{
+	const unsigned short *buf = addr;
+	unsigned short *portp;
+
+	if (port >= LAN_IOSTART && port < LAN_IOEND) {
+		/*
+		 * This portion is only used by smc91111.c to write data
+		 * into the DATA_REG. Do not swap the data.
+		 */
+		portp = PORT2ADDR_NE(port);
+		while (count--)
+			*(volatile unsigned short *)portp = *buf++;
+#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
+	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
+		pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short),
+				 count, 1);
+#endif
+	} else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*(volatile unsigned short *)portp = *buf++;
+	}
+}
+
+void _outsl(unsigned int port, const void *addr, unsigned long count)
+{
+	const unsigned long *buf = addr;
+	unsigned char *portp;
+
+	portp = PORT2ADDR(port);
+	while (count--)
+		*(volatile unsigned long *)portp = *buf++;
+}
diff --git a/arch/m32r/kernel/io_usrv.c b/arch/m32r/kernel/io_usrv.c
new file mode 100644
index 0000000..27928a0
--- /dev/null
+++ b/arch/m32r/kernel/io_usrv.c
@@ -0,0 +1,249 @@
+/*
+ *  linux/arch/m32r/kernel/io_usrv.c
+ *
+ *  Typical I/O routines for uServer board.
+ *
+ *  Copyright (c) 2001 - 2003  Hiroyuki Kondo, Hirokazu Takata,
+ *                             Hitoshi Yamamoto, Takeo Takahashi
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file "COPYING" in the main directory of this
+ *  archive for more details.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/m32r.h>
+#include <asm/page.h>
+#include <asm/io.h>
+
+#include <linux/types.h>
+#include "../drivers/m32r_cfc.h"
+
+extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int);
+extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int);
+extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int);
+extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int);
+#define CFC_IOSTART	CFC_IOPORT_BASE
+#define CFC_IOEND	(CFC_IOSTART + (M32R_PCC_MAPSIZE * M32R_MAX_PCC) - 1)
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+#define UART0_REGSTART		0x04c20000
+#define UART1_REGSTART		0x04c20100
+#define UART_IOMAP_SIZE		8
+#define UART0_IOSTART		0x3f8
+#define UART0_IOEND		(UART0_IOSTART + UART_IOMAP_SIZE - 1)
+#define UART1_IOSTART		0x2f8
+#define UART1_IOEND		(UART1_IOSTART + UART_IOMAP_SIZE - 1)
+#endif	/* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */
+
+#define PORT2ADDR(port)	_port2addr(port)
+
+static __inline__ void *_port2addr(unsigned long port)
+{
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	if (port >= UART0_IOSTART && port <= UART0_IOEND)
+		port = ((port - UART0_IOSTART) << 1) + UART0_REGSTART;
+	else if (port >= UART1_IOSTART && port <= UART1_IOEND)
+		port = ((port - UART1_IOSTART) << 1) + UART1_REGSTART;
+#endif	/* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */
+	return (void *)(port + NONCACHE_OFFSET);
+}
+
+static __inline__ void delay(void)
+{
+	__asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory");
+}
+
+unsigned char _inb(unsigned long port)
+{
+	if (port >= CFC_IOSTART && port <= CFC_IOEND) {
+		unsigned char b;
+		pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0);
+		return b;
+	} else
+		return *(volatile unsigned char *)PORT2ADDR(port);
+}
+
+unsigned short _inw(unsigned long port)
+{
+	if (port >= CFC_IOSTART && port <= CFC_IOEND) {
+		unsigned short w;
+		pcc_ioread_word(0, port, &w, sizeof(w), 1, 0);
+		return w;
+	} else
+		return *(volatile unsigned short *)PORT2ADDR(port);
+}
+
+unsigned long _inl(unsigned long port)
+{
+	if (port >= CFC_IOSTART && port <= CFC_IOEND) {
+		unsigned long l;
+		pcc_ioread_word(0, port, &l, sizeof(l), 1, 0);
+		return l;
+	} else
+		return *(volatile unsigned long *)PORT2ADDR(port);
+}
+
+unsigned char _inb_p(unsigned long port)
+{
+	unsigned char b;
+
+	if (port >= CFC_IOSTART && port <= CFC_IOEND) {
+		pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0);
+		return b;
+	} else {
+		b = *(volatile unsigned char *)PORT2ADDR(port);
+		delay();
+		return b;
+	}
+}
+
+unsigned short _inw_p(unsigned long port)
+{
+	unsigned short w;
+
+	if (port >= CFC_IOSTART && port <= CFC_IOEND) {
+		pcc_ioread_word(0, port, &w, sizeof(w), 1, 0);
+		return w;
+	} else {
+		w = *(volatile unsigned short *)PORT2ADDR(port);
+		delay();
+		return w;
+	}
+}
+
+unsigned long _inl_p(unsigned long port)
+{
+	unsigned long v;
+
+	v = *(volatile unsigned long *)PORT2ADDR(port);
+	delay();
+
+	return v;
+}
+
+void _outb(unsigned char b, unsigned long port)
+{
+	if (port >= CFC_IOSTART && port <= CFC_IOEND)
+		pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0);
+	else
+		*(volatile unsigned char *)PORT2ADDR(port) = b;
+}
+
+void _outw(unsigned short w, unsigned long port)
+{
+	if (port >= CFC_IOSTART && port <= CFC_IOEND)
+		pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0);
+	else
+		*(volatile unsigned short *)PORT2ADDR(port) = w;
+}
+
+void _outl(unsigned long l, unsigned long port)
+{
+	if (port >= CFC_IOSTART && port <= CFC_IOEND)
+		pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0);
+	else
+		*(volatile unsigned long *)PORT2ADDR(port) = l;
+}
+
+void _outb_p(unsigned char b, unsigned long port)
+{
+	if (port >= CFC_IOSTART && port <= CFC_IOEND)
+		pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0);
+	else
+		*(volatile unsigned char *)PORT2ADDR(port) = b;
+	delay();
+}
+
+void _outw_p(unsigned short w, unsigned long port)
+{
+	if (port >= CFC_IOSTART && port <= CFC_IOEND)
+		pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0);
+	else
+		*(volatile unsigned short *)PORT2ADDR(port) = w;
+	delay();
+}
+
+void _outl_p(unsigned long l, unsigned long port)
+{
+	*(volatile unsigned long *)PORT2ADDR(port) = l;
+	delay();
+}
+
+void _insb(unsigned int port, void * addr, unsigned long count)
+{
+	if (port >= CFC_IOSTART && port <= CFC_IOEND)
+		pcc_ioread_byte(0, port, addr, sizeof(unsigned char), count, 1);
+	else {
+		unsigned char *buf = addr;
+		unsigned char *portp = PORT2ADDR(port);
+		while (count--)
+			*buf++ = *(volatile unsigned char *)portp;
+	}
+}
+
+void _insw(unsigned int port, void * addr, unsigned long count)
+{
+	unsigned short *buf = addr;
+	unsigned short *portp;
+
+	if (port >= CFC_IOSTART && port <= CFC_IOEND)
+		pcc_ioread_word(0, port, addr, sizeof(unsigned short), count,
+			1);
+	else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*buf++ = *(volatile unsigned short *)portp;
+	}
+}
+
+void _insl(unsigned int port, void * addr, unsigned long count)
+{
+	unsigned long *buf = addr;
+	unsigned long *portp;
+
+	portp = PORT2ADDR(port);
+	while (count--)
+		*buf++ = *(volatile unsigned long *)portp;
+}
+
+void _outsb(unsigned int port, const void * addr, unsigned long count)
+{
+	const unsigned char *buf = addr;
+	unsigned char *portp;
+
+	if (port >= CFC_IOSTART && port <= CFC_IOEND)
+		pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char),
+			count, 1);
+	else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*(volatile unsigned char *)portp = *buf++;
+	}
+}
+
+void _outsw(unsigned int port, const void * addr, unsigned long count)
+{
+	const unsigned short *buf = addr;
+	unsigned short *portp;
+
+	if (port >= CFC_IOSTART && port <= CFC_IOEND)
+		pcc_iowrite_word(0, port, (void *)addr, sizeof(unsigned short),
+			count, 1);
+	else {
+		portp = PORT2ADDR(port);
+		while (count--)
+			*(volatile unsigned short *)portp = *buf++;
+	}
+}
+
+void _outsl(unsigned int port, const void * addr, unsigned long count)
+{
+	const unsigned long *buf = addr;
+	unsigned char *portp;
+
+	portp = PORT2ADDR(port);
+	while (count--)
+		*(volatile unsigned long *)portp = *buf++;
+}
diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c
new file mode 100644
index 0000000..1ce6392
--- /dev/null
+++ b/arch/m32r/kernel/irq.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/m32r/kernel/irq.c
+ *
+ *  Copyright (c) 2003, 2004  Hitoshi Yamamoto
+ *  Copyright (c) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+/*
+ *	linux/arch/i386/kernel/irq.c
+ *
+ *	Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
+ *
+ * This file contains the lowest level m32r-specific interrupt
+ * entry and irq statistics code. All the remaining irq logic is
+ * done by the generic kernel/irq/ code and in the
+ * m32r-specific irq controller code.
+ */
+
+#include <linux/kernel_stat.h>
+#include <linux/interrupt.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+#include <asm/uaccess.h>
+
+atomic_t irq_err_count;
+atomic_t irq_mis_count;
+
+/*
+ * Generic, controller-independent functions:
+ */
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+	int i = *(loff_t *) v, j;
+	struct irqaction * action;
+	unsigned long flags;
+
+	if (i == 0) {
+		seq_printf(p, "           ");
+		for (j=0; j<NR_CPUS; j++)
+			if (cpu_online(j))
+				seq_printf(p, "CPU%d       ",j);
+		seq_putc(p, '\n');
+	}
+
+	if (i < NR_IRQS) {
+		spin_lock_irqsave(&irq_desc[i].lock, flags);
+		action = irq_desc[i].action;
+		if (!action)
+			goto skip;
+		seq_printf(p, "%3d: ",i);
+#ifndef CONFIG_SMP
+		seq_printf(p, "%10u ", kstat_irqs(i));
+#else
+		for (j = 0; j < NR_CPUS; j++)
+			if (cpu_online(j))
+				seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+#endif
+		seq_printf(p, " %14s", irq_desc[i].handler->typename);
+		seq_printf(p, "  %s", action->name);
+
+		for (action=action->next; action; action = action->next)
+			seq_printf(p, ", %s", action->name);
+
+		seq_putc(p, '\n');
+skip:
+		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+	} else if (i == NR_IRQS) {
+		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
+		seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
+	}
+	return 0;
+}
+
+/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ */
+asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs)
+{
+	irq_enter();
+
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+	/* FIXME M32R */
+#endif
+	__do_IRQ(irq, regs);
+	irq_exit();
+
+	return 1;
+}
diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c
new file mode 100644
index 0000000..e5ec134
--- /dev/null
+++ b/arch/m32r/kernel/m32r_ksyms.c
@@ -0,0 +1,140 @@
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/user.h>
+#include <linux/elfcore.h>
+#include <linux/sched.h>
+#include <linux/in6.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <linux/string.h>
+
+#include <asm/semaphore.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/checksum.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/tlbflush.h>
+
+extern void dump_thread(struct pt_regs *, struct user *);
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE)
+extern struct drive_info_struct drive_info;
+EXPORT_SYMBOL(drive_info);
+#endif
+
+/* platform dependent support */
+EXPORT_SYMBOL(boot_cpu_data);
+EXPORT_SYMBOL(dump_thread);
+EXPORT_SYMBOL(dump_fpu);
+EXPORT_SYMBOL(__ioremap);
+EXPORT_SYMBOL(iounmap);
+EXPORT_SYMBOL(enable_irq);
+EXPORT_SYMBOL(disable_irq);
+EXPORT_SYMBOL(disable_irq_nosync);
+EXPORT_SYMBOL(kernel_thread);
+EXPORT_SYMBOL(__down);
+EXPORT_SYMBOL(__down_interruptible);
+EXPORT_SYMBOL(__up);
+EXPORT_SYMBOL(__down_trylock);
+
+/* Networking helper routines. */
+/* Delay loops */
+EXPORT_SYMBOL(__udelay);
+EXPORT_SYMBOL(__delay);
+EXPORT_SYMBOL(__const_udelay);
+
+EXPORT_SYMBOL(__get_user_1);
+EXPORT_SYMBOL(__get_user_2);
+EXPORT_SYMBOL(__get_user_4);
+
+EXPORT_SYMBOL(strpbrk);
+EXPORT_SYMBOL(strstr);
+
+EXPORT_SYMBOL(strncpy_from_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+EXPORT_SYMBOL(clear_user);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(__generic_copy_from_user);
+EXPORT_SYMBOL(__generic_copy_to_user);
+EXPORT_SYMBOL(strnlen_user);
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_CHIP_M32700_TS1
+extern void *dcache_dummy;
+EXPORT_SYMBOL(dcache_dummy);
+#endif
+EXPORT_SYMBOL(cpu_data);
+EXPORT_SYMBOL(cpu_online_map);
+EXPORT_SYMBOL(cpu_callout_map);
+
+/* Global SMP stuff */
+EXPORT_SYMBOL(synchronize_irq);
+EXPORT_SYMBOL(smp_call_function);
+
+/* TLB flushing */
+EXPORT_SYMBOL(smp_flush_tlb_page);
+#endif
+
+/* compiler generated symbol */
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __lshldi3(void);
+extern void __lshrdi3(void);
+extern void __muldi3(void);
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__lshldi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__muldi3);
+
+/* memory and string operations */
+EXPORT_SYMBOL(memchr);
+EXPORT_SYMBOL(memcpy);
+/* EXPORT_SYMBOL(memcpy_fromio); // not implement yet */
+/* EXPORT_SYMBOL(memcpy_toio); // not implement yet */
+EXPORT_SYMBOL(memset);
+/* EXPORT_SYMBOL(memset_io); // not implement yet */
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(memscan);
+EXPORT_SYMBOL(copy_page);
+EXPORT_SYMBOL(clear_page);
+
+EXPORT_SYMBOL(strcat);
+EXPORT_SYMBOL(strchr);
+EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strcpy);
+EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(strncat);
+EXPORT_SYMBOL(strncmp);
+EXPORT_SYMBOL(strnlen);
+EXPORT_SYMBOL(strncpy);
+
+EXPORT_SYMBOL(_inb);
+EXPORT_SYMBOL(_inw);
+EXPORT_SYMBOL(_inl);
+EXPORT_SYMBOL(_outb);
+EXPORT_SYMBOL(_outw);
+EXPORT_SYMBOL(_outl);
+EXPORT_SYMBOL(_inb_p);
+EXPORT_SYMBOL(_inw_p);
+EXPORT_SYMBOL(_inl_p);
+EXPORT_SYMBOL(_outb_p);
+EXPORT_SYMBOL(_outw_p);
+EXPORT_SYMBOL(_outl_p);
+EXPORT_SYMBOL(_insb);
+EXPORT_SYMBOL(_insw);
+EXPORT_SYMBOL(_insl);
+EXPORT_SYMBOL(_outsb);
+EXPORT_SYMBOL(_outsw);
+EXPORT_SYMBOL(_outsl);
+EXPORT_SYMBOL(_readb);
+EXPORT_SYMBOL(_readw);
+EXPORT_SYMBOL(_readl);
+EXPORT_SYMBOL(_writeb);
+EXPORT_SYMBOL(_writew);
+EXPORT_SYMBOL(_writel);
+
diff --git a/arch/m32r/kernel/module.c b/arch/m32r/kernel/module.c
new file mode 100644
index 0000000..f6a79a0
--- /dev/null
+++ b/arch/m32r/kernel/module.c
@@ -0,0 +1,259 @@
+/*  Kernel module help for M32R.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/config.h>
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt...)
+#endif
+
+void *module_alloc(unsigned long size)
+{
+	if (size == 0)
+		return NULL;
+#ifdef CONFIG_MMU
+	return vmalloc_exec(size);
+#else
+	return vmalloc(size);
+#endif
+}
+
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
+	/* FIXME: If module_region == mod->init_region, trim exception
+           table entries. */
+}
+
+/* We don't need anything special. */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+			      Elf_Shdr *sechdrs,
+			      char *secstrings,
+			      struct module *mod)
+{
+	return 0;
+}
+
+#define COPY_UNALIGNED_WORD(sw, tw, align) \
+{ \
+	void *__s = &(sw), *__t = &(tw); \
+	unsigned short *__s2 = __s, *__t2 =__t; \
+	unsigned char *__s1 = __s, *__t1 =__t; \
+	switch ((align)) \
+	{ \
+	case 0: \
+		*(unsigned long *) __t = *(unsigned long *) __s; \
+		break; \
+	case 2: \
+		*__t2++ = *__s2++; \
+		*__t2 = *__s2; \
+		break; \
+	default: \
+		*__t1++ = *__s1++; \
+		*__t1++ = *__s1++; \
+		*__t1++ = *__s1++; \
+		*__t1 = *__s1; \
+		break; \
+	} \
+}
+
+#define COPY_UNALIGNED_HWORD(sw, tw, align) \
+  { \
+    void *__s = &(sw), *__t = &(tw); \
+    unsigned short *__s2 = __s, *__t2 =__t; \
+    unsigned char *__s1 = __s, *__t1 =__t; \
+    switch ((align)) \
+    { \
+    case 0: \
+      *__t2 = *__s2; \
+      break; \
+    default: \
+      *__t1++ = *__s1++; \
+      *__t1 = *__s1; \
+      break; \
+    } \
+  }
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+		   const char *strtab,
+		   unsigned int symindex,
+		   unsigned int relsec,
+		   struct module *me)
+{
+	unsigned int i;
+	Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	Elf32_Addr relocation;
+	uint32_t *location;
+	uint32_t value;
+	unsigned short *hlocation;
+	unsigned short hvalue;
+	int svalue;
+	int align;
+
+	DEBUGP("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to.  Note that all
+		   undefined symbols have been resolved.  */
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+			+ ELF32_R_SYM(rel[i].r_info);
+		relocation = sym->st_value + rel[i].r_addend;
+		align = (int)location & 3;
+
+		switch (ELF32_R_TYPE(rel[i].r_info)) {
+		case R_M32R_32_RELA:
+	    		COPY_UNALIGNED_WORD (*location, value, align);
+			value += relocation;
+	    		COPY_UNALIGNED_WORD (value, *location, align);
+			break;
+		case R_M32R_HI16_ULO_RELA:
+	    		COPY_UNALIGNED_WORD (*location, value, align);
+                        relocation = (relocation >>16) & 0xffff;
+			/* RELA must has 0 at relocation field. */
+			value += relocation;
+	    		COPY_UNALIGNED_WORD (value, *location, align);
+			break;
+		case R_M32R_HI16_SLO_RELA:
+	    		COPY_UNALIGNED_WORD (*location, value, align);
+			if (relocation & 0x8000) relocation += 0x10000;
+                        relocation = (relocation >>16) & 0xffff;
+			/* RELA must has 0 at relocation field. */
+			value += relocation;
+	    		COPY_UNALIGNED_WORD (value, *location, align);
+			break;
+		case R_M32R_16_RELA:
+			hlocation = (unsigned short *)location;
+                        relocation = relocation & 0xffff;
+			/* RELA must has 0 at relocation field. */
+			hvalue = relocation;
+	    		COPY_UNALIGNED_WORD (hvalue, *hlocation, align);
+			break;
+		case R_M32R_SDA16_RELA:
+		case R_M32R_LO16_RELA:
+	    		COPY_UNALIGNED_WORD (*location, value, align);
+                        relocation = relocation & 0xffff;
+			/* RELA must has 0 at relocation field. */
+			value += relocation;
+	    		COPY_UNALIGNED_WORD (value, *location, align);
+			break;
+		case R_M32R_24_RELA:
+	    		COPY_UNALIGNED_WORD (*location, value, align);
+                        relocation = relocation & 0xffffff;
+			/* RELA must has 0 at relocation field. */
+			value += relocation;
+	    		COPY_UNALIGNED_WORD (value, *location, align);
+			break;
+		case R_M32R_18_PCREL_RELA:
+	  		relocation = (relocation - (Elf32_Addr) location);
+			if (relocation < -0x20000 || 0x1fffc < relocation)
+				{
+					printk(KERN_ERR "module %s: relocation overflow: %u\n",
+					me->name, relocation);
+					return -ENOEXEC;
+				}
+	    		COPY_UNALIGNED_WORD (*location, value, align);
+			if (value & 0xffff)
+				{
+					/* RELA must has 0 at relocation field. */
+					printk(KERN_ERR "module %s: illegal relocation field: %u\n",
+					me->name, value);
+					return -ENOEXEC;
+				}
+                        relocation = (relocation >> 2) & 0xffff;
+			value += relocation;
+	    		COPY_UNALIGNED_WORD (value, *location, align);
+			break;
+		case R_M32R_10_PCREL_RELA:
+			hlocation = (unsigned short *)location;
+	  		relocation = (relocation - (Elf32_Addr) location);
+	    		COPY_UNALIGNED_HWORD (*hlocation, hvalue, align);
+			svalue = (int)hvalue;
+			svalue = (signed char)svalue << 2;
+			relocation += svalue;
+                        relocation = (relocation >> 2) & 0xff;
+			hvalue = hvalue & 0xff00;
+			hvalue += relocation;
+	    		COPY_UNALIGNED_HWORD (hvalue, *hlocation, align);
+			break;
+		case R_M32R_26_PCREL_RELA:
+	  		relocation = (relocation - (Elf32_Addr) location);
+			if (relocation < -0x2000000 || 0x1fffffc < relocation)
+				{
+					printk(KERN_ERR "module %s: relocation overflow: %u\n",
+					me->name, relocation);
+					return -ENOEXEC;
+				}
+	    		COPY_UNALIGNED_WORD (*location, value, align);
+			if (value & 0xffffff)
+				{
+					/* RELA must has 0 at relocation field. */
+					printk(KERN_ERR "module %s: illegal relocation field: %u\n",
+					me->name, value);
+					return -ENOEXEC;
+				}
+                        relocation = (relocation >> 2) & 0xffffff;
+			value += relocation;
+	    		COPY_UNALIGNED_WORD (value, *location, align);
+			break;
+		default:
+			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+			       me->name, ELF32_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
+
+int apply_relocate(Elf32_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,
+		       unsigned int relsec,
+		       struct module *me)
+{
+#if 0
+	printk(KERN_ERR "module %s: REL RELOCATION unsupported\n",
+	       me->name);
+	return -ENOEXEC;
+#endif
+	return 0;
+
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+		    const Elf_Shdr *sechdrs,
+		    struct module *me)
+{
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+}
diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
new file mode 100644
index 0000000..b556c3c
--- /dev/null
+++ b/arch/m32r/kernel/process.c
@@ -0,0 +1,359 @@
+/*
+ *  linux/arch/m32r/kernel/process.c
+ *
+ *  Copyright (c) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
+ *                            Hitoshi Yamamoto
+ *  Taken from sh version.
+ *    Copyright (C) 1995  Linus Torvalds
+ *    SuperH version:  Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima
+ */
+
+#undef DEBUG_PROCESS
+#ifdef DEBUG_PROCESS
+#define DPRINTK(fmt, args...)  printk("%s:%d:%s: " fmt, __FILE__, __LINE__, \
+  __FUNCTION__, ##args)
+#else
+#define DPRINTK(fmt, args...)
+#endif
+
+/*
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+#include <linux/fs.h>
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/hardirq.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/mmu_context.h>
+#include <asm/elf.h>
+#include <asm/m32r.h>
+
+#include <linux/err.h>
+
+static int hlt_counter=0;
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+	return tsk->thread.lr;
+}
+
+/*
+ * Powermanagement idle function, if any..
+ */
+void (*pm_idle)(void) = NULL;
+
+void disable_hlt(void)
+{
+	hlt_counter++;
+}
+
+EXPORT_SYMBOL(disable_hlt);
+
+void enable_hlt(void)
+{
+	hlt_counter--;
+}
+
+EXPORT_SYMBOL(enable_hlt);
+
+/*
+ * We use this is we don't have any better
+ * idle routine..
+ */
+void default_idle(void)
+{
+	/* M32R_FIXME: Please use "cpu_sleep" mode.  */
+	cpu_relax();
+}
+
+/*
+ * On SMP it's slightly faster (but much more power-consuming!)
+ * to poll the ->work.need_resched flag instead of waiting for the
+ * cross-CPU IPI to arrive. Use this option with caution.
+ */
+static void poll_idle (void)
+{
+	/* M32R_FIXME */
+	cpu_relax();
+}
+
+/*
+ * The idle thread. There's no useful work to be
+ * done, so just try to conserve power and have a
+ * low exit latency (ie sit in a loop waiting for
+ * somebody to say that they'd like to reschedule)
+ */
+void cpu_idle (void)
+{
+	/* endless idle loop with no priority at all */
+	while (1) {
+		while (!need_resched()) {
+			void (*idle)(void) = pm_idle;
+
+			if (!idle)
+				idle = default_idle;
+
+			idle();
+		}
+		schedule();
+	}
+}
+
+void machine_restart(char *__unused)
+{
+	printk("Please push reset button!\n");
+	while (1)
+		cpu_relax();
+}
+
+EXPORT_SYMBOL(machine_restart);
+
+void machine_halt(void)
+{
+	printk("Please push reset button!\n");
+	while (1)
+		cpu_relax();
+}
+
+EXPORT_SYMBOL(machine_halt);
+
+void machine_power_off(void)
+{
+	/* M32R_FIXME */
+}
+
+EXPORT_SYMBOL(machine_power_off);
+
+static int __init idle_setup (char *str)
+{
+	if (!strncmp(str, "poll", 4)) {
+		printk("using poll in idle threads.\n");
+		pm_idle = poll_idle;
+	} else if (!strncmp(str, "sleep", 4)) {
+		printk("using sleep in idle threads.\n");
+		pm_idle = default_idle;
+	}
+
+	return 1;
+}
+
+__setup("idle=", idle_setup);
+
+void show_regs(struct pt_regs * regs)
+{
+	printk("\n");
+	printk("BPC[%08lx]:PSW[%08lx]:LR [%08lx]:FP [%08lx]\n", \
+	  regs->bpc, regs->psw, regs->lr, regs->fp);
+	printk("BBPC[%08lx]:BBPSW[%08lx]:SPU[%08lx]:SPI[%08lx]\n", \
+	  regs->bbpc, regs->bbpsw, regs->spu, regs->spi);
+	printk("R0 [%08lx]:R1 [%08lx]:R2 [%08lx]:R3 [%08lx]\n", \
+	  regs->r0, regs->r1, regs->r2, regs->r3);
+	printk("R4 [%08lx]:R5 [%08lx]:R6 [%08lx]:R7 [%08lx]\n", \
+	  regs->r4, regs->r5, regs->r6, regs->r7);
+	printk("R8 [%08lx]:R9 [%08lx]:R10[%08lx]:R11[%08lx]\n", \
+	  regs->r8, regs->r9, regs->r10, regs->r11);
+	printk("R12[%08lx]\n", \
+	  regs->r12);
+
+#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
+	printk("ACC0H[%08lx]:ACC0L[%08lx]\n", \
+	  regs->acc0h, regs->acc0l);
+	printk("ACC1H[%08lx]:ACC1L[%08lx]\n", \
+	  regs->acc1h, regs->acc1l);
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+	printk("ACCH[%08lx]:ACCL[%08lx]\n", \
+	  regs->acch, regs->accl);
+#else
+#error unknown isa configuration
+#endif
+}
+
+/*
+ * Create a kernel thread
+ */
+
+/*
+ * This is the mechanism for creating a new kernel thread.
+ *
+ * NOTE! Only a kernel-only process(ie the swapper or direct descendants
+ * who haven't done an "execve()") should use this: it will work within
+ * a system call from a "real" process, but the process memory space will
+ * not be free'd until both the parent and the child have exited.
+ */
+static void kernel_thread_helper(void *nouse, int (*fn)(void *), void *arg)
+{
+	fn(arg);
+	do_exit(-1);
+}
+
+int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+	struct pt_regs regs;
+
+	memset(&regs, 0, sizeof (regs));
+	regs.r1 = (unsigned long)fn;
+	regs.r2 = (unsigned long)arg;
+
+	regs.bpc = (unsigned long)kernel_thread_helper;
+
+	regs.psw = M32R_PSW_BIE;
+
+	/* Ok, create the new process. */
+	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0, NULL,
+		NULL);
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+	/* Nothing to do. */
+	DPRINTK("pid = %d\n", current->pid);
+}
+
+void flush_thread(void)
+{
+	DPRINTK("pid = %d\n", current->pid);
+	memset(&current->thread.debug_trap, 0, sizeof(struct debug_trap));
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+	/* do nothing */
+	DPRINTK("pid = %d\n", dead_task->pid);
+}
+
+/* Fill in the fpu structure for a core dump.. */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
+{
+	return 0; /* Task didn't use the fpu at all. */
+}
+
+int copy_thread(int nr, unsigned long clone_flags, unsigned long spu,
+	unsigned long unused, struct task_struct *tsk, struct pt_regs *regs)
+{
+	struct pt_regs *childregs;
+	unsigned long sp = (unsigned long)tsk->thread_info + THREAD_SIZE;
+	extern void ret_from_fork(void);
+
+	/* Copy registers */
+	sp -= sizeof (struct pt_regs);
+	childregs = (struct pt_regs *)sp;
+	*childregs = *regs;
+
+	childregs->spu = spu;
+	childregs->r0 = 0;	/* Child gets zero as return value */
+	regs->r0 = tsk->pid;
+	tsk->thread.sp = (unsigned long)childregs;
+	tsk->thread.lr = (unsigned long)ret_from_fork;
+
+	return 0;
+}
+
+/*
+ * fill in the user structure for a core dump..
+ */
+void dump_thread(struct pt_regs * regs, struct user * dump)
+{
+	/* M32R_FIXME */
+}
+
+/*
+ * Capture the user space registers if the task is not running (in user space)
+ */
+int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
+{
+	/* M32R_FIXME */
+	return 1;
+}
+
+asmlinkage int sys_fork(unsigned long r0, unsigned long r1, unsigned long r2,
+	unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6,
+	struct pt_regs regs)
+{
+#ifdef CONFIG_MMU
+	return do_fork(SIGCHLD, regs.spu, &regs, 0, NULL, NULL);
+#else
+	return -EINVAL;
+#endif /* CONFIG_MMU */
+}
+
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
+			 unsigned long parent_tidptr,
+			 unsigned long child_tidptr,
+			 unsigned long r4, unsigned long r5, unsigned long r6,
+			 struct pt_regs regs)
+{
+	if (!newsp)
+		newsp = regs.spu;
+
+	return do_fork(clone_flags, newsp, &regs, 0,
+		       (int __user *)parent_tidptr, (int __user *)child_tidptr);
+}
+
+/*
+ * This is trivial, and on the face of it looks like it
+ * could equally well be done in user mode.
+ *
+ * Not so, for quite unobvious reasons - register pressure.
+ * In user mode vfork() cannot have a stack frame, and if
+ * done by calling the "clone()" system call directly, you
+ * do not have enough call-clobbered registers to hold all
+ * the information you need.
+ */
+asmlinkage int sys_vfork(unsigned long r0, unsigned long r1, unsigned long r2,
+	unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6,
+	struct pt_regs regs)
+{
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs.spu, &regs, 0,
+			NULL, NULL);
+}
+
+/*
+ * sys_execve() executes a new program.
+ */
+asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv,
+			  char __user * __user *uenvp,
+			  unsigned long r3, unsigned long r4, unsigned long r5,
+			  unsigned long r6, struct pt_regs regs)
+{
+	int error;
+	char *filename;
+
+	filename = getname(ufilename);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		goto out;
+
+	error = do_execve(filename, uargv, uenvp, &regs);
+	if (error == 0) {
+		task_lock(current);
+		current->ptrace &= ~PT_DTRACE;
+		task_unlock(current);
+	}
+	putname(filename);
+out:
+	return error;
+}
+
+/*
+ * These bracket the sleeping functions..
+ */
+#define first_sched	((unsigned long) scheduling_functions_start_here)
+#define last_sched	((unsigned long) scheduling_functions_end_here)
+
+unsigned long get_wchan(struct task_struct *p)
+{
+	/* M32R_FIXME */
+	return (0);
+}
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
new file mode 100644
index 0000000..8b40f36
--- /dev/null
+++ b/arch/m32r/kernel/ptrace.c
@@ -0,0 +1,829 @@
+/*
+ * linux/arch/m32r/kernel/ptrace.c
+ *
+ * Copyright (C) 2002  Hirokazu Takata, Takeo Takahashi
+ * Copyright (C) 2004  Hirokazu Takata, Kei Sakamoto
+ *
+ * Original x86 implementation:
+ *	By Ross Biro 1/23/92
+ *	edited by Linus Torvalds
+ *
+ * Some code taken from sh version:
+ *   Copyright (C) 1999, 2000  Kaz Kojima & Niibe Yutaka
+ * Some code taken from arm version:
+ *   Copyright (C) 2000 Russell King
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/string.h>
+
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/mmu_context.h>
+
+/*
+ * Get the address of the live pt_regs for the specified task.
+ * These are saved onto the top kernel stack when the process
+ * is not running.
+ *
+ * Note: if a user thread is execve'd from kernel space, the
+ * kernel stack will not be empty on entry to the kernel, so
+ * ptracing these tasks will fail.
+ */
+static inline struct pt_regs *
+get_user_regs(struct task_struct *task)
+{
+        return (struct pt_regs *)
+                ((unsigned long)task->thread_info + THREAD_SIZE
+                 - sizeof(struct pt_regs));
+}
+
+/*
+ * This routine will get a word off of the process kernel stack.
+ */
+static inline unsigned long int
+get_stack_long(struct task_struct *task, int offset)
+{
+	unsigned long *stack;
+
+	stack = (unsigned long *)get_user_regs(task);
+
+	return stack[offset];
+}
+
+/*
+ * This routine will put a word on the process kernel stack.
+ */
+static inline int
+put_stack_long(struct task_struct *task, int offset, unsigned long data)
+{
+	unsigned long *stack;
+
+	stack = (unsigned long *)get_user_regs(task);
+	stack[offset] = data;
+
+	return 0;
+}
+
+static int reg_offset[] = {
+	PT_R0, PT_R1, PT_R2, PT_R3, PT_R4, PT_R5, PT_R6, PT_R7,
+	PT_R8, PT_R9, PT_R10, PT_R11, PT_R12, PT_FP, PT_LR, PT_SPU,
+};
+
+/*
+ * Read the word at offset "off" into the "struct user".  We
+ * actually access the pt_regs stored on the kernel stack.
+ */
+static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
+			    unsigned long __user *data)
+{
+	unsigned long tmp;
+#ifndef NO_FPU
+	struct user * dummy = NULL;
+#endif
+
+	if ((off & 3) || (off < 0) || (off > sizeof(struct user) - 3))
+		return -EIO;
+
+	off >>= 2;
+	switch (off) {
+	case PT_EVB:
+		__asm__ __volatile__ (
+			"mvfc	%0, cr5 \n\t"
+	 		: "=r" (tmp)
+		);
+		break;
+	case PT_CBR: {
+			unsigned long psw;
+			psw = get_stack_long(tsk, PT_PSW);
+			tmp = ((psw >> 8) & 1);
+		}
+		break;
+	case PT_PSW: {
+			unsigned long psw, bbpsw;
+			psw = get_stack_long(tsk, PT_PSW);
+			bbpsw = get_stack_long(tsk, PT_BBPSW);
+			tmp = ((psw >> 8) & 0xff) | ((bbpsw & 0xff) << 8);
+		}
+		break;
+	case PT_PC:
+		tmp = get_stack_long(tsk, PT_BPC);
+		break;
+	case PT_BPC:
+		off = PT_BBPC;
+		/* fall through */
+	default:
+		if (off < (sizeof(struct pt_regs) >> 2))
+			tmp = get_stack_long(tsk, off);
+#ifndef NO_FPU
+		else if (off >= (long)(&dummy->fpu >> 2) &&
+			 off < (long)(&dummy->u_fpvalid >> 2)) {
+			if (!tsk_used_math(tsk)) {
+				if (off == (long)(&dummy->fpu.fpscr >> 2))
+					tmp = FPSCR_INIT;
+				else
+					tmp = 0;
+			} else
+				tmp = ((long *)(&tsk->thread.fpu >> 2))
+					[off - (long)&dummy->fpu];
+		} else if (off == (long)(&dummy->u_fpvalid >> 2))
+			tmp = !!tsk_used_math(tsk);
+#endif /* not NO_FPU */
+		else
+			tmp = 0;
+	}
+
+	return put_user(tmp, data);
+}
+
+static int ptrace_write_user(struct task_struct *tsk, unsigned long off,
+			     unsigned long data)
+{
+	int ret = -EIO;
+#ifndef NO_FPU
+	struct user * dummy = NULL;
+#endif
+
+	if ((off & 3) || off < 0 ||
+	    off > sizeof(struct user) - 3)
+		return -EIO;
+
+	off >>= 2;
+	switch (off) {
+	case PT_EVB:
+	case PT_BPC:
+	case PT_SPI:
+		/* We don't allow to modify evb. */
+		ret = 0;
+		break;
+	case PT_PSW:
+	case PT_CBR: {
+			/* We allow to modify only cbr in psw */
+			unsigned long psw;
+			psw = get_stack_long(tsk, PT_PSW);
+			psw = (psw & ~0x100) | ((data & 1) << 8);
+			ret = put_stack_long(tsk, PT_PSW, psw);
+		}
+		break;
+	case PT_PC:
+		off = PT_BPC;
+		data &= ~1;
+		/* fall through */
+	default:
+		if (off < (sizeof(struct pt_regs) >> 2))
+			ret = put_stack_long(tsk, off, data);
+#ifndef NO_FPU
+		else if (off >= (long)(&dummy->fpu >> 2) &&
+			 off < (long)(&dummy->u_fpvalid >> 2)) {
+			set_stopped_child_used_math(tsk);
+			((long *)&tsk->thread.fpu)
+				[off - (long)&dummy->fpu] = data;
+			ret = 0;
+		} else if (off == (long)(&dummy->u_fpvalid >> 2)) {
+			conditional_stopped_child_used_math(data, tsk);
+			ret = 0;
+		}
+#endif /* not NO_FPU */
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Get all user integer registers.
+ */
+static int ptrace_getregs(struct task_struct *tsk, void __user *uregs)
+{
+	struct pt_regs *regs = get_user_regs(tsk);
+
+	return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0;
+}
+
+/*
+ * Set all user integer registers.
+ */
+static int ptrace_setregs(struct task_struct *tsk, void __user *uregs)
+{
+	struct pt_regs newregs;
+	int ret;
+
+	ret = -EFAULT;
+	if (copy_from_user(&newregs, uregs, sizeof(struct pt_regs)) == 0) {
+		struct pt_regs *regs = get_user_regs(tsk);
+		*regs = newregs;
+		ret = 0;
+	}
+
+	return ret;
+}
+
+
+static inline int
+check_condition_bit(struct task_struct *child)
+{
+	return (int)((get_stack_long(child, PT_PSW) >> 8) & 1);
+}
+
+static int
+check_condition_src(unsigned long op, unsigned long regno1,
+		    unsigned long regno2, struct task_struct *child)
+{
+	unsigned long reg1, reg2;
+
+	reg2 = get_stack_long(child, reg_offset[regno2]);
+
+	switch (op) {
+	case 0x0: /* BEQ */
+		reg1 = get_stack_long(child, reg_offset[regno1]);
+		return reg1 == reg2;
+	case 0x1: /* BNE */
+		reg1 = get_stack_long(child, reg_offset[regno1]);
+		return reg1 != reg2;
+	case 0x8: /* BEQZ */
+		return reg2 == 0;
+	case 0x9: /* BNEZ */
+		return reg2 != 0;
+	case 0xa: /* BLTZ */
+		return (int)reg2 < 0;
+	case 0xb: /* BGEZ */
+		return (int)reg2 >= 0;
+	case 0xc: /* BLEZ */
+		return (int)reg2 <= 0;
+	case 0xd: /* BGTZ */
+		return (int)reg2 > 0;
+	default:
+		/* never reached */
+		return 0;
+	}
+}
+
+static void
+compute_next_pc_for_16bit_insn(unsigned long insn, unsigned long pc,
+			       unsigned long *next_pc,
+			       struct task_struct *child)
+{
+	unsigned long op, op2, op3;
+	unsigned long disp;
+	unsigned long regno;
+	int parallel = 0;
+
+	if (insn & 0x00008000)
+		parallel = 1;
+	if (pc & 3)
+		insn &= 0x7fff;	/* right slot */
+	else
+		insn >>= 16;	/* left slot */
+
+	op = (insn >> 12) & 0xf;
+	op2 = (insn >> 8) & 0xf;
+	op3 = (insn >> 4) & 0xf;
+
+	if (op == 0x7) {
+		switch (op2) {
+		case 0xd: /* BNC */
+		case 0x9: /* BNCL */
+			if (!check_condition_bit(child)) {
+				disp = (long)(insn << 24) >> 22;
+				*next_pc = (pc & ~0x3) + disp;
+				return;
+			}
+			break;
+		case 0x8: /* BCL */
+		case 0xc: /* BC */
+			if (check_condition_bit(child)) {
+				disp = (long)(insn << 24) >> 22;
+				*next_pc = (pc & ~0x3) + disp;
+				return;
+			}
+			break;
+		case 0xe: /* BL */
+		case 0xf: /* BRA */
+			disp = (long)(insn << 24) >> 22;
+			*next_pc = (pc & ~0x3) + disp;
+			return;
+			break;
+		}
+	} else if (op == 0x1) {
+		switch (op2) {
+		case 0x0:
+			if (op3 == 0xf) { /* TRAP */
+#if 1
+				/* pass through */
+#else
+ 				/* kernel space is not allowed as next_pc */
+				unsigned long evb;
+				unsigned long trapno;
+				trapno = insn & 0xf;
+				__asm__ __volatile__ (
+					"mvfc %0, cr5\n"
+		 			:"=r"(evb)
+		 			:
+				);
+				*next_pc = evb + (trapno << 2);
+				return;
+#endif
+			} else if (op3 == 0xd) { /* RTE */
+				*next_pc = get_stack_long(child, PT_BPC);
+				return;
+			}
+			break;
+		case 0xc: /* JC */
+			if (op3 == 0xc && check_condition_bit(child)) {
+				regno = insn & 0xf;
+				*next_pc = get_stack_long(child,
+							  reg_offset[regno]);
+				return;
+			}
+			break;
+		case 0xd: /* JNC */
+			if (op3 == 0xc && !check_condition_bit(child)) {
+				regno = insn & 0xf;
+				*next_pc = get_stack_long(child,
+							  reg_offset[regno]);
+				return;
+			}
+			break;
+		case 0xe: /* JL */
+		case 0xf: /* JMP */
+			if (op3 == 0xc) { /* JMP */
+				regno = insn & 0xf;
+				*next_pc = get_stack_long(child,
+							  reg_offset[regno]);
+				return;
+			}
+			break;
+		}
+	}
+	if (parallel)
+		*next_pc = pc + 4;
+	else
+		*next_pc = pc + 2;
+}
+
+static void
+compute_next_pc_for_32bit_insn(unsigned long insn, unsigned long pc,
+			       unsigned long *next_pc,
+			       struct task_struct *child)
+{
+	unsigned long op;
+	unsigned long op2;
+	unsigned long disp;
+	unsigned long regno1, regno2;
+
+	op = (insn >> 28) & 0xf;
+	if (op == 0xf) { 	/* branch 24-bit relative */
+		op2 = (insn >> 24) & 0xf;
+		switch (op2) {
+		case 0xd:	/* BNC */
+		case 0x9:	/* BNCL */
+			if (!check_condition_bit(child)) {
+				disp = (long)(insn << 8) >> 6;
+				*next_pc = (pc & ~0x3) + disp;
+				return;
+			}
+			break;
+		case 0x8:	/* BCL */
+		case 0xc:	/* BC */
+			if (check_condition_bit(child)) {
+				disp = (long)(insn << 8) >> 6;
+				*next_pc = (pc & ~0x3) + disp;
+				return;
+			}
+			break;
+		case 0xe:	/* BL */
+		case 0xf:	/* BRA */
+			disp = (long)(insn << 8) >> 6;
+			*next_pc = (pc & ~0x3) + disp;
+			return;
+		}
+	} else if (op == 0xb) { /* branch 16-bit relative */
+		op2 = (insn >> 20) & 0xf;
+		switch (op2) {
+		case 0x0: /* BEQ */
+		case 0x1: /* BNE */
+		case 0x8: /* BEQZ */
+		case 0x9: /* BNEZ */
+		case 0xa: /* BLTZ */
+		case 0xb: /* BGEZ */
+		case 0xc: /* BLEZ */
+		case 0xd: /* BGTZ */
+			regno1 = ((insn >> 24) & 0xf);
+			regno2 = ((insn >> 16) & 0xf);
+			if (check_condition_src(op2, regno1, regno2, child)) {
+				disp = (long)(insn << 16) >> 14;
+				*next_pc = (pc & ~0x3) + disp;
+				return;
+			}
+			break;
+		}
+	}
+	*next_pc = pc + 4;
+}
+
+static inline void
+compute_next_pc(unsigned long insn, unsigned long pc,
+		unsigned long *next_pc, struct task_struct *child)
+{
+	if (insn & 0x80000000)
+		compute_next_pc_for_32bit_insn(insn, pc, next_pc, child);
+	else
+		compute_next_pc_for_16bit_insn(insn, pc, next_pc, child);
+}
+
+static int
+register_debug_trap(struct task_struct *child, unsigned long next_pc,
+	unsigned long next_insn, unsigned long *code)
+{
+	struct debug_trap *p = &child->thread.debug_trap;
+	unsigned long addr = next_pc & ~3;
+
+	if (p->nr_trap == MAX_TRAPS) {
+		printk("kernel BUG at %s %d: p->nr_trap = %d\n",
+					__FILE__, __LINE__, p->nr_trap);
+		return -1;
+	}
+	p->addr[p->nr_trap] = addr;
+	p->insn[p->nr_trap] = next_insn;
+	p->nr_trap++;
+	if (next_pc & 3) {
+		*code = (next_insn & 0xffff0000) | 0x10f1;
+		/* xxx --> TRAP1 */
+	} else {
+		if ((next_insn & 0x80000000) || (next_insn & 0x8000)) {
+			*code = 0x10f17000;
+			/* TRAP1 --> NOP */
+		} else {
+			*code = (next_insn & 0xffff) | 0x10f10000;
+			/* TRAP1 --> xxx */
+		}
+	}
+	return 0;
+}
+
+static int
+unregister_debug_trap(struct task_struct *child, unsigned long addr,
+		      unsigned long *code)
+{
+	struct debug_trap *p = &child->thread.debug_trap;
+        int i;
+
+	/* Search debug trap entry. */
+	for (i = 0; i < p->nr_trap; i++) {
+		if (p->addr[i] == addr)
+			break;
+	}
+	if (i >= p->nr_trap) {
+		/* The trap may be requested from debugger.
+		 * ptrace should do nothing in this case.
+		 */
+		return 0;
+	}
+
+	/* Recover orignal instruction code. */
+	*code = p->insn[i];
+
+	/* Shift debug trap entries. */
+	while (i < p->nr_trap - 1) {
+		p->insn[i] = p->insn[i + 1];
+		p->addr[i] = p->addr[i + 1];
+		i++;
+	}
+	p->nr_trap--;
+	return 1;
+}
+
+static void
+unregister_all_debug_traps(struct task_struct *child)
+{
+	struct debug_trap *p = &child->thread.debug_trap;
+	int i;
+
+	for (i = 0; i < p->nr_trap; i++)
+		access_process_vm(child, p->addr[i], &p->insn[i], sizeof(p->insn[i]), 1);
+	p->nr_trap = 0;
+}
+
+static inline void
+invalidate_cache(void)
+{
+#if defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_OPSP)
+
+	_flush_cache_copyback_all();
+
+#else	/* ! CONFIG_CHIP_M32700 */
+
+	/* Invalidate cache */
+	__asm__ __volatile__ (
+                "ldi    r0, #-1					\n\t"
+                "ldi    r1, #0					\n\t"
+                "stb    r1, @r0		; cache off		\n\t"
+                ";						\n\t"
+                "ldi    r0, #-2					\n\t"
+                "ldi    r1, #1					\n\t"
+                "stb    r1, @r0		; cache invalidate	\n\t"
+                ".fillinsn					\n"
+                "0:						\n\t"
+                "ldb    r1, @r0		; invalidate check	\n\t"
+                "bnez   r1, 0b					\n\t"
+                ";						\n\t"
+                "ldi    r0, #-1					\n\t"
+                "ldi    r1, #1					\n\t"
+                "stb    r1, @r0		; cache on		\n\t"
+		: : : "r0", "r1", "memory"
+	);
+	/* FIXME: copying-back d-cache and invalidating i-cache are needed.
+	 */
+#endif	/* CONFIG_CHIP_M32700 */
+}
+
+/* Embed a debug trap (TRAP1) code */
+static int
+embed_debug_trap(struct task_struct *child, unsigned long next_pc)
+{
+	unsigned long next_insn, code;
+	unsigned long addr = next_pc & ~3;
+
+	if (access_process_vm(child, addr, &next_insn, sizeof(next_insn), 0)
+	    != sizeof(next_insn)) {
+		return -1; /* error */
+	}
+
+	/* Set a trap code. */
+	if (register_debug_trap(child, next_pc, next_insn, &code)) {
+		return -1; /* error */
+	}
+	if (access_process_vm(child, addr, &code, sizeof(code), 1)
+	    != sizeof(code)) {
+		return -1; /* error */
+	}
+	return 0; /* success */
+}
+
+void
+withdraw_debug_trap(struct pt_regs *regs)
+{
+	unsigned long addr;
+	unsigned long code;
+
+ 	addr = (regs->bpc - 2) & ~3;
+	regs->bpc -= 2;
+	if (unregister_debug_trap(current, addr, &code)) {
+	    access_process_vm(current, addr, &code, sizeof(code), 1);
+	    invalidate_cache();
+	}
+}
+
+static void
+init_debug_traps(struct task_struct *child)
+{
+	struct debug_trap *p = &child->thread.debug_trap;
+	int i;
+	p->nr_trap = 0;
+	for (i = 0; i < MAX_TRAPS; i++) {
+		p->addr[i] = 0;
+		p->insn[i] = 0;
+	}
+}
+
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure single step bits etc are not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{
+	/* nothing to do.. */
+}
+
+static int
+do_ptrace(long request, struct task_struct *child, long addr, long data)
+{
+	unsigned long tmp;
+	int ret;
+
+	switch (request) {
+	/*
+	 * read word at location "addr" in the child process.
+	 */
+	case PTRACE_PEEKTEXT:
+	case PTRACE_PEEKDATA:
+		ret = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+		if (ret == sizeof(tmp))
+			ret = put_user(tmp,(unsigned long __user *) data);
+		else
+			ret = -EIO;
+		break;
+
+	/*
+	 * read the word at location addr in the USER area.
+	 */
+	case PTRACE_PEEKUSR:
+		ret = ptrace_read_user(child, addr,
+				       (unsigned long __user *)data);
+		break;
+
+	/*
+	 * write the word at location addr.
+	 */
+	case PTRACE_POKETEXT:
+	case PTRACE_POKEDATA:
+		ret = access_process_vm(child, addr, &data, sizeof(data), 1);
+		if (ret == sizeof(data)) {
+			ret = 0;
+			if (request == PTRACE_POKETEXT) {
+				invalidate_cache();
+			}
+		} else {
+			ret = -EIO;
+		}
+		break;
+
+	/*
+	 * write the word at location addr in the USER area.
+	 */
+	case PTRACE_POKEUSR:
+		ret = ptrace_write_user(child, addr, data);
+		break;
+
+	/*
+	 * continue/restart and stop at next (return from) syscall
+	 */
+	case PTRACE_SYSCALL:
+	case PTRACE_CONT:
+		ret = -EIO;
+		if ((unsigned long) data > _NSIG)
+			break;
+		if (request == PTRACE_SYSCALL)
+			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		else
+			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		child->exit_code = data;
+		wake_up_process(child);
+		ret = 0;
+		break;
+
+	/*
+	 * make the child exit.  Best I can do is send it a sigkill.
+	 * perhaps it should be put in the status that it wants to
+	 * exit.
+	 */
+	case PTRACE_KILL: {
+		ret = 0;
+		unregister_all_debug_traps(child);
+		invalidate_cache();
+		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
+			break;
+		child->exit_code = SIGKILL;
+		wake_up_process(child);
+		break;
+	}
+
+	/*
+	 * execute single instruction.
+	 */
+	case PTRACE_SINGLESTEP: {
+		unsigned long next_pc;
+		unsigned long pc, insn;
+
+		ret = -EIO;
+		if ((unsigned long) data > _NSIG)
+			break;
+		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		if ((child->ptrace & PT_DTRACE) == 0) {
+			/* Spurious delayed TF traps may occur */
+			child->ptrace |= PT_DTRACE;
+		}
+
+		/* Compute next pc.  */
+		pc = get_stack_long(child, PT_BPC);
+
+		if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
+		    != sizeof(insn))
+			break;
+
+		compute_next_pc(insn, pc, &next_pc, child);
+		if (next_pc & 0x80000000)
+			break;
+
+		if (embed_debug_trap(child, next_pc))
+			break;
+
+		invalidate_cache();
+		child->exit_code = data;
+
+		/* give it a chance to run. */
+		wake_up_process(child);
+		ret = 0;
+		break;
+	}
+
+	/*
+	 * detach a process that was attached.
+	 */
+	case PTRACE_DETACH:
+		ret = 0;
+		ret = ptrace_detach(child, data);
+		break;
+
+	case PTRACE_GETREGS:
+		ret = ptrace_getregs(child, (void __user *)data);
+		break;
+
+	case PTRACE_SETREGS:
+		ret = ptrace_setregs(child, (void __user *)data);
+		break;
+
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	return ret;
+}
+
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+{
+	struct task_struct *child;
+	int ret;
+
+	lock_kernel();
+	ret = -EPERM;
+	if (request == PTRACE_TRACEME) {
+		/* are we already being traced? */
+		if (current->ptrace & PT_PTRACED)
+			goto out;
+		/* set the ptrace bit in the process flags. */
+		current->ptrace |= PT_PTRACED;
+		ret = 0;
+		goto out;
+	}
+	ret = -ESRCH;
+	read_lock(&tasklist_lock);
+	child = find_task_by_pid(pid);
+	if (child)
+		get_task_struct(child);
+	read_unlock(&tasklist_lock);
+	if (!child)
+		goto out;
+
+	ret = -EPERM;
+	if (pid == 1)		/* you may not mess with init */
+		goto out;
+
+	if (request == PTRACE_ATTACH) {
+		ret = ptrace_attach(child);
+		if (ret == 0)
+			init_debug_traps(child);
+		goto out_tsk;
+	}
+
+	ret = ptrace_check_attach(child, request == PTRACE_KILL);
+	if (ret == 0)
+		ret = do_ptrace(request, child, addr, data);
+
+out_tsk:
+	put_task_struct(child);
+out:
+	unlock_kernel();
+
+	return ret;
+}
+
+/* notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+void do_syscall_trace(void)
+{
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return;
+	if (!(current->ptrace & PT_PTRACED))
+		return;
+	/* the 0x80 provides a way for the tracing parent to distinguish
+	   between a syscall stop and SIGTRAP delivery */
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+				 ? 0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
diff --git a/arch/m32r/kernel/semaphore.c b/arch/m32r/kernel/semaphore.c
new file mode 100644
index 0000000..9a6e6d7
--- /dev/null
+++ b/arch/m32r/kernel/semaphore.c
@@ -0,0 +1,186 @@
+/*
+ *  linux/arch/m32r/semaphore.c
+ *    orig : i386 2.6.4
+ *
+ *  M32R semaphore implementation.
+ *
+ *	Copyright (c) 2002 - 2004 Hitoshi Yamamoto
+ */
+
+/*
+ * i386 semaphore implementation.
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ *
+ * Portions Copyright 1999 Red Hat, Inc.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org>
+ */
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <asm/semaphore.h>
+
+/*
+ * Semaphores are implemented using a two-way counter:
+ * The "count" variable is decremented for each process
+ * that tries to acquire the semaphore, while the "sleeping"
+ * variable is a count of such acquires.
+ *
+ * Notably, the inline "up()" and "down()" functions can
+ * efficiently test if they need to do any extra work (up
+ * needs to do something only if count was negative before
+ * the increment operation.
+ *
+ * "sleeping" and the contention routine ordering is protected
+ * by the spinlock in the semaphore's waitqueue head.
+ *
+ * Note that these functions are only called when there is
+ * contention on the lock, and as such all this is the
+ * "non-critical" part of the whole semaphore business. The
+ * critical part is the inline stuff in <asm/semaphore.h>
+ * where we want to avoid any extra jumps and calls.
+ */
+
+/*
+ * Logic:
+ *  - only on a boundary condition do we need to care. When we go
+ *    from a negative count to a non-negative, we wake people up.
+ *  - when we go from a non-negative count to a negative do we
+ *    (a) synchronize with the "sleeper" count and (b) make sure
+ *    that we're on the wakeup list before we synchronize so that
+ *    we cannot lose wakeup events.
+ */
+
+asmlinkage void __up(struct semaphore *sem)
+{
+	wake_up(&sem->wait);
+}
+
+asmlinkage void __sched __down(struct semaphore * sem)
+{
+	struct task_struct *tsk = current;
+	DECLARE_WAITQUEUE(wait, tsk);
+	unsigned long flags;
+
+	tsk->state = TASK_UNINTERRUPTIBLE;
+	spin_lock_irqsave(&sem->wait.lock, flags);
+	add_wait_queue_exclusive_locked(&sem->wait, &wait);
+
+	sem->sleepers++;
+	for (;;) {
+		int sleepers = sem->sleepers;
+
+		/*
+		 * Add "everybody else" into it. They aren't
+		 * playing, because we own the spinlock in
+		 * the wait_queue_head.
+		 */
+		if (!atomic_add_negative(sleepers - 1, &sem->count)) {
+			sem->sleepers = 0;
+			break;
+		}
+		sem->sleepers = 1;	/* us - see -1 above */
+		spin_unlock_irqrestore(&sem->wait.lock, flags);
+
+		schedule();
+
+		spin_lock_irqsave(&sem->wait.lock, flags);
+		tsk->state = TASK_UNINTERRUPTIBLE;
+	}
+	remove_wait_queue_locked(&sem->wait, &wait);
+	wake_up_locked(&sem->wait);
+	spin_unlock_irqrestore(&sem->wait.lock, flags);
+	tsk->state = TASK_RUNNING;
+}
+
+asmlinkage int __sched __down_interruptible(struct semaphore * sem)
+{
+	int retval = 0;
+	struct task_struct *tsk = current;
+	DECLARE_WAITQUEUE(wait, tsk);
+	unsigned long flags;
+
+	tsk->state = TASK_INTERRUPTIBLE;
+	spin_lock_irqsave(&sem->wait.lock, flags);
+	add_wait_queue_exclusive_locked(&sem->wait, &wait);
+
+	sem->sleepers++;
+	for (;;) {
+		int sleepers = sem->sleepers;
+
+		/*
+		 * With signals pending, this turns into
+		 * the trylock failure case - we won't be
+		 * sleeping, and we* can't get the lock as
+		 * it has contention. Just correct the count
+		 * and exit.
+		 */
+		if (signal_pending(current)) {
+			retval = -EINTR;
+			sem->sleepers = 0;
+			atomic_add(sleepers, &sem->count);
+			break;
+		}
+
+		/*
+		 * Add "everybody else" into it. They aren't
+		 * playing, because we own the spinlock in
+		 * wait_queue_head. The "-1" is because we're
+		 * still hoping to get the semaphore.
+		 */
+		if (!atomic_add_negative(sleepers - 1, &sem->count)) {
+			sem->sleepers = 0;
+			break;
+		}
+		sem->sleepers = 1;	/* us - see -1 above */
+		spin_unlock_irqrestore(&sem->wait.lock, flags);
+
+		schedule();
+
+		spin_lock_irqsave(&sem->wait.lock, flags);
+		tsk->state = TASK_INTERRUPTIBLE;
+	}
+	remove_wait_queue_locked(&sem->wait, &wait);
+	wake_up_locked(&sem->wait);
+	spin_unlock_irqrestore(&sem->wait.lock, flags);
+
+	tsk->state = TASK_RUNNING;
+	return retval;
+}
+
+/*
+ * Trylock failed - make sure we correct for
+ * having decremented the count.
+ *
+ * We could have done the trylock with a
+ * single "cmpxchg" without failure cases,
+ * but then it wouldn't work on a 386.
+ */
+asmlinkage int __down_trylock(struct semaphore * sem)
+{
+	int sleepers;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sem->wait.lock, flags);
+	sleepers = sem->sleepers + 1;
+	sem->sleepers = 0;
+
+	/*
+	 * Add "everybody else" and us into it. They aren't
+	 * playing, because we own the spinlock in the
+	 * wait_queue_head.
+	 */
+	if (!atomic_add_negative(sleepers, &sem->count)) {
+		wake_up_locked(&sem->wait);
+	}
+
+	spin_unlock_irqrestore(&sem->wait.lock, flags);
+	return 1;
+}
diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c
new file mode 100644
index 0000000..4826cd6
--- /dev/null
+++ b/arch/m32r/kernel/setup.c
@@ -0,0 +1,420 @@
+/*
+ *  linux/arch/m32r/kernel/setup.c
+ *
+ *  Setup routines for Renesas M32R
+ *
+ *  Copyright (c) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
+ *                            Hitoshi Yamamoto
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/console.h>
+#include <linux/initrd.h>
+#include <linux/major.h>
+#include <linux/root_dev.h>
+#include <linux/seq_file.h>
+#include <linux/timex.h>
+#include <linux/tty.h>
+#include <linux/cpu.h>
+#include <linux/nodemask.h>
+
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/m32r.h>
+#include <asm/setup.h>
+#include <asm/sections.h>
+
+#ifdef CONFIG_MMU
+extern void init_mmu(void);
+#endif
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD)	\
+	|| defined(CONFIG_BLK_DEV_IDE_MODULE)			\
+	|| defined(CONFIG_BLK_DEV_HD_MODULE)
+struct drive_info_struct { char dummy[32]; } drive_info;
+#endif
+
+extern char _end[];
+
+/*
+ * Machine setup..
+ */
+struct cpuinfo_m32r boot_cpu_data;
+
+#ifdef CONFIG_BLK_DEV_RAM
+extern int rd_doload;	/* 1 = load ramdisk, 0 = don't load */
+extern int rd_prompt;	/* 1 = prompt for ramdisk, 0 = don't prompt */
+extern int rd_image_start;	/* starting block # of image */
+#endif
+
+#if defined(CONFIG_VGA_CONSOLE)
+struct screen_info screen_info = {
+	.orig_video_lines      = 25,
+	.orig_video_cols       = 80,
+	.orig_video_mode       = 0,
+	.orig_video_ega_bx     = 0,
+	.orig_video_isVGA      = 1,
+	.orig_video_points     = 8
+};
+#endif
+
+extern int root_mountflags;
+
+static char command_line[COMMAND_LINE_SIZE];
+
+static struct resource data_resource = {
+	.name   = "Kernel data",
+	.start  = 0,
+	.end    = 0,
+	.flags  = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+	.name   = "Kernel code",
+	.start  = 0,
+	.end    = 0,
+	.flags  = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+unsigned long memory_start;
+unsigned long memory_end;
+
+void __init setup_arch(char **);
+int get_cpuinfo(char *);
+
+static __inline__ void parse_mem_cmdline(char ** cmdline_p)
+{
+	char c = ' ';
+	char *to = command_line;
+	char *from = COMMAND_LINE;
+	int len = 0;
+	int usermem = 0;
+
+	/* Save unparsed command line copy for /proc/cmdline */
+	memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+
+	memory_start = (unsigned long)CONFIG_MEMORY_START+PAGE_OFFSET;
+	memory_end = memory_start+(unsigned long)CONFIG_MEMORY_SIZE;
+
+	for ( ; ; ) {
+		if (c == ' ' && !memcmp(from, "mem=", 4)) {
+			if (to != command_line)
+				to--;
+
+			{
+				unsigned long mem_size;
+
+				usermem = 1;
+				mem_size = memparse(from+4, &from);
+				memory_end = memory_start + mem_size;
+			}
+		}
+		c = *(from++);
+		if (!c)
+			break;
+
+		if (COMMAND_LINE_SIZE <= ++len)
+			break;
+
+		*(to++) = c;
+	}
+	*to = '\0';
+	*cmdline_p = command_line;
+	if (usermem)
+		printk(KERN_INFO "user-defined physical RAM map:\n");
+}
+
+#ifndef CONFIG_DISCONTIGMEM
+static unsigned long __init setup_memory(void)
+{
+	unsigned long start_pfn, max_low_pfn, bootmap_size;
+
+	start_pfn = PFN_UP( __pa(_end) );
+	max_low_pfn = PFN_DOWN( __pa(memory_end) );
+
+	/*
+	 * Initialize the boot-time allocator (with low memory only):
+	 */
+	bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
+		CONFIG_MEMORY_START>>PAGE_SHIFT, max_low_pfn);
+
+	/*
+	 * Register fully available low RAM pages with the bootmem allocator.
+	 */
+	{
+		unsigned long curr_pfn;
+		unsigned long last_pfn;
+		unsigned long pages;
+
+		/*
+		 * We are rounding up the start address of usable memory:
+		 */
+		curr_pfn = PFN_UP(__pa(memory_start));
+
+		/*
+		 * ... and at the end of the usable range downwards:
+		 */
+		last_pfn = PFN_DOWN(__pa(memory_end));
+
+		if (last_pfn > max_low_pfn)
+			last_pfn = max_low_pfn;
+
+		pages = last_pfn - curr_pfn;
+		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(pages));
+	}
+
+	/*
+	 * Reserve the kernel text and
+	 * Reserve the bootmem bitmap. We do this in two steps (first step
+	 * was init_bootmem()), because this catches the (definitely buggy)
+	 * case of us accidentally initializing the bootmem allocator with
+	 * an invalid RAM area.
+	 */
+	reserve_bootmem(CONFIG_MEMORY_START + PAGE_SIZE,
+		(PFN_PHYS(start_pfn) + bootmap_size + PAGE_SIZE - 1)
+		- CONFIG_MEMORY_START);
+
+	/*
+	 * reserve physical page 0 - it's a special BIOS page on many boxes,
+	 * enabling clean reboots, SMP operation, laptop functions.
+	 */
+	reserve_bootmem(CONFIG_MEMORY_START, PAGE_SIZE);
+
+	/*
+	 * reserve memory hole
+	 */
+#ifdef CONFIG_MEMHOLE
+	reserve_bootmem(CONFIG_MEMHOLE_START, CONFIG_MEMHOLE_SIZE);
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (LOADER_TYPE && INITRD_START) {
+		if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
+			reserve_bootmem(INITRD_START, INITRD_SIZE);
+			initrd_start = INITRD_START ?
+				INITRD_START + PAGE_OFFSET : 0;
+
+			initrd_end = initrd_start + INITRD_SIZE;
+			printk("initrd:start[%08lx],size[%08lx]\n",
+				initrd_start, INITRD_SIZE);
+		} else {
+			printk("initrd extends beyond end of memory "
+				"(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+				INITRD_START + INITRD_SIZE,
+				max_low_pfn << PAGE_SHIFT);
+
+			initrd_start = 0;
+		}
+	}
+#endif
+
+	return max_low_pfn;
+}
+#else	/* CONFIG_DISCONTIGMEM */
+extern unsigned long setup_memory(void);
+#endif	/* CONFIG_DISCONTIGMEM */
+
+#define M32R_PCC_PCATCR	0x00ef7014	/* will move to m32r.h */
+
+void __init setup_arch(char **cmdline_p)
+{
+	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
+
+	boot_cpu_data.cpu_clock = M32R_CPUCLK;
+	boot_cpu_data.bus_clock = M32R_BUSCLK;
+	boot_cpu_data.timer_divide = M32R_TIMER_DIVIDE;
+
+#ifdef CONFIG_BLK_DEV_RAM
+	rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
+	rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
+	rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
+#endif
+
+	if (!MOUNT_ROOT_RDONLY)
+		root_mountflags &= ~MS_RDONLY;
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+	conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+#endif
+
+#ifdef CONFIG_DISCONTIGMEM
+	nodes_clear(node_online_map);
+	node_set_online(0);
+	node_set_online(1);
+#endif	/* CONFIG_DISCONTIGMEM */
+
+	init_mm.start_code = (unsigned long) _text;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
+	init_mm.brk = (unsigned long) _end;
+
+	code_resource.start = virt_to_phys(_text);
+	code_resource.end = virt_to_phys(_etext)-1;
+	data_resource.start = virt_to_phys(_etext);
+	data_resource.end = virt_to_phys(_edata)-1;
+
+	parse_mem_cmdline(cmdline_p);
+
+	setup_memory();
+
+	paging_init();
+}
+
+static struct cpu cpu[NR_CPUS];
+
+static int __init topology_init(void)
+{
+	int cpu_id;
+
+	for (cpu_id = 0; cpu_id < NR_CPUS; cpu_id++)
+		if (cpu_possible(cpu_id))
+			register_cpu(&cpu[cpu_id], cpu_id, NULL);
+
+	return 0;
+}
+
+subsys_initcall(topology_init);
+
+#ifdef CONFIG_PROC_FS
+/*
+ *	Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	struct cpuinfo_m32r *c = v;
+	unsigned long cpu = c - cpu_data;
+
+#ifdef CONFIG_SMP
+	if (!cpu_online(cpu))
+		return 0;
+#endif	/* CONFIG_SMP */
+
+	seq_printf(m, "processor\t: %ld\n", cpu);
+
+#ifdef CONFIG_CHIP_VDEC2
+	seq_printf(m, "cpu family\t: VDEC2\n"
+		"cache size\t: Unknown\n");
+#elif  CONFIG_CHIP_M32700
+	seq_printf(m,"cpu family\t: M32700\n"
+		"cache size\t: I-8KB/D-8KB\n");
+#elif  CONFIG_CHIP_M32102
+	seq_printf(m,"cpu family\t: M32102\n"
+		"cache size\t: I-8KB\n");
+#elif  CONFIG_CHIP_OPSP
+	seq_printf(m,"cpu family\t: OPSP\n"
+		"cache size\t: I-8KB/D-8KB\n");
+#elif  CONFIG_CHIP_MP
+	seq_printf(m, "cpu family\t: M32R-MP\n"
+		"cache size\t: I-xxKB/D-xxKB\n");
+#else
+	seq_printf(m, "cpu family\t: Unknown\n");
+#endif
+	seq_printf(m, "bogomips\t: %lu.%02lu\n",
+		c->loops_per_jiffy/(500000/HZ),
+		(c->loops_per_jiffy/(5000/HZ)) % 100);
+#ifdef CONFIG_PLAT_MAPPI
+	seq_printf(m, "Machine\t\t: Mappi Evaluation board\n");
+#elif CONFIG_PLAT_MAPPI2
+	seq_printf(m, "Machine\t\t: Mappi-II Evaluation board\n");
+#elif  CONFIG_PLAT_M32700UT
+	seq_printf(m, "Machine\t\t: M32700UT Evaluation board\n");
+#elif  CONFIG_PLAT_OPSPUT
+	seq_printf(m, "Machine\t\t: OPSPUT Evaluation board\n");
+#elif  CONFIG_PLAT_USRV
+	seq_printf(m, "Machine\t\t: uServer\n");
+#elif  CONFIG_PLAT_OAKS32R
+	seq_printf(m, "Machine\t\t: OAKS32R\n");
+#else
+	seq_printf(m, "Machine\t\t: Unknown\n");
+#endif
+
+#define PRINT_CLOCK(name, value)				\
+	seq_printf(m, name " clock\t: %d.%02dMHz\n",		\
+		((value) / 1000000), ((value) % 1000000)/10000)
+
+	PRINT_CLOCK("CPU", (int)c->cpu_clock);
+	PRINT_CLOCK("Bus", (int)c->bus_clock);
+
+	seq_printf(m, "\n");
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+	start:	c_start,
+	next:	c_next,
+	stop:	c_stop,
+	show:	show_cpuinfo,
+};
+#endif	/* CONFIG_PROC_FS */
+
+unsigned long cpu_initialized __initdata = 0;
+
+/*
+ * cpu_init() initializes state that is per-CPU. Some data is already
+ * initialized (naturally) in the bootstrap process.
+ * We reload them nevertheless, this function acts as a
+ * 'CPU state barrier', nothing should get across.
+ */
+#if defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_XNUX2)	\
+	|| defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32102) \
+	|| defined(CONFIG_CHIP_OPSP)
+void __init cpu_init (void)
+{
+	int cpu_id = smp_processor_id();
+
+	if (test_and_set_bit(cpu_id, &cpu_initialized)) {
+		printk(KERN_WARNING "CPU#%d already initialized!\n", cpu_id);
+		for ( ; ; )
+			local_irq_enable();
+	}
+	printk(KERN_INFO "Initializing CPU#%d\n", cpu_id);
+
+	/* Set up and load the per-CPU TSS and LDT */
+	atomic_inc(&init_mm.mm_count);
+	current->active_mm = &init_mm;
+	if (current->mm)
+		BUG();
+
+	/* Force FPU initialization */
+	current_thread_info()->status = 0;
+	clear_used_math();
+
+#ifdef CONFIG_MMU
+	/* Set up MMU */
+	init_mmu();
+#endif
+
+	/* Set up ICUIMASK */
+	outl(0x00070000, M32R_ICU_IMASK_PORTL);		/* imask=111 */
+}
+#endif	/* defined(CONFIG_CHIP_VDEC2) ... */
diff --git a/arch/m32r/kernel/setup_m32700ut.c b/arch/m32r/kernel/setup_m32700ut.c
new file mode 100644
index 0000000..488aa87
--- /dev/null
+++ b/arch/m32r/kernel/setup_m32700ut.c
@@ -0,0 +1,478 @@
+/*
+ *  linux/arch/m32r/kernel/setup_m32700ut.c
+ *
+ *  Setup routines for Renesas M32700UT Board
+ *
+ *  Copyright (c) 2002 	Hiroyuki Kondo, Hirokazu Takata,
+ *                      Hitoshi Yamamoto, Takeo Takahashi
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file "COPYING" in the main directory of this
+ *  archive for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/system.h>
+#include <asm/m32r.h>
+#include <asm/io.h>
+
+/*
+ * M32700 Interrupt Control Unit (Level 1)
+ */
+#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long)))
+
+#ifndef CONFIG_SMP
+typedef struct {
+	unsigned long icucr;  /* ICU Control Register */
+} icu_data_t;
+#endif /* CONFIG_SMP */
+
+static icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
+
+static void disable_m32700ut_irq(unsigned int irq)
+{
+	unsigned long port, data;
+
+	port = irq2port(irq);
+	data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7;
+	outl(data, port);
+}
+
+static void enable_m32700ut_irq(unsigned int irq)
+{
+	unsigned long port, data;
+
+	port = irq2port(irq);
+	data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6;
+	outl(data, port);
+}
+
+static void mask_and_ack_m32700ut(unsigned int irq)
+{
+	disable_m32700ut_irq(irq);
+}
+
+static void end_m32700ut_irq(unsigned int irq)
+{
+	enable_m32700ut_irq(irq);
+}
+
+static unsigned int startup_m32700ut_irq(unsigned int irq)
+{
+	enable_m32700ut_irq(irq);
+	return (0);
+}
+
+static void shutdown_m32700ut_irq(unsigned int irq)
+{
+	unsigned long port;
+
+	port = irq2port(irq);
+	outl(M32R_ICUCR_ILEVEL7, port);
+}
+
+static struct hw_interrupt_type m32700ut_irq_type =
+{
+	"M32700UT-IRQ",
+	startup_m32700ut_irq,
+	shutdown_m32700ut_irq,
+	enable_m32700ut_irq,
+	disable_m32700ut_irq,
+	mask_and_ack_m32700ut,
+	end_m32700ut_irq
+};
+
+/*
+ * Interrupt Control Unit of PLD on M32700UT (Level 2)
+ */
+#define irq2pldirq(x)		((x) - M32700UT_PLD_IRQ_BASE)
+#define pldirq2port(x)		(unsigned long)((int)PLD_ICUCR1 + \
+				 (((x) - 1) * sizeof(unsigned short)))
+
+typedef struct {
+	unsigned short icucr;  /* ICU Control Register */
+} pld_icu_data_t;
+
+static pld_icu_data_t pld_icu_data[M32700UT_NUM_PLD_IRQ];
+
+static void disable_m32700ut_pld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2pldirq(irq);
+//	disable_m32700ut_irq(M32R_IRQ_INT1);
+	port = pldirq2port(pldirq);
+	data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
+	outw(data, port);
+}
+
+static void enable_m32700ut_pld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2pldirq(irq);
+//	enable_m32700ut_irq(M32R_IRQ_INT1);
+	port = pldirq2port(pldirq);
+	data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
+	outw(data, port);
+}
+
+static void mask_and_ack_m32700ut_pld(unsigned int irq)
+{
+	disable_m32700ut_pld_irq(irq);
+//	mask_and_ack_m32700ut(M32R_IRQ_INT1);
+}
+
+static void end_m32700ut_pld_irq(unsigned int irq)
+{
+	enable_m32700ut_pld_irq(irq);
+	end_m32700ut_irq(M32R_IRQ_INT1);
+}
+
+static unsigned int startup_m32700ut_pld_irq(unsigned int irq)
+{
+	enable_m32700ut_pld_irq(irq);
+	return (0);
+}
+
+static void shutdown_m32700ut_pld_irq(unsigned int irq)
+{
+	unsigned long port;
+	unsigned int pldirq;
+
+	pldirq = irq2pldirq(irq);
+//	shutdown_m32700ut_irq(M32R_IRQ_INT1);
+	port = pldirq2port(pldirq);
+	outw(PLD_ICUCR_ILEVEL7, port);
+}
+
+static struct hw_interrupt_type m32700ut_pld_irq_type =
+{
+	"M32700UT-PLD-IRQ",
+	startup_m32700ut_pld_irq,
+	shutdown_m32700ut_pld_irq,
+	enable_m32700ut_pld_irq,
+	disable_m32700ut_pld_irq,
+	mask_and_ack_m32700ut_pld,
+	end_m32700ut_pld_irq
+};
+
+/*
+ * Interrupt Control Unit of PLD on M32700UT-LAN (Level 2)
+ */
+#define irq2lanpldirq(x)	((x) - M32700UT_LAN_PLD_IRQ_BASE)
+#define lanpldirq2port(x)	(unsigned long)((int)M32700UT_LAN_ICUCR1 + \
+				 (((x) - 1) * sizeof(unsigned short)))
+
+static pld_icu_data_t lanpld_icu_data[M32700UT_NUM_LAN_PLD_IRQ];
+
+static void disable_m32700ut_lanpld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2lanpldirq(irq);
+	port = lanpldirq2port(pldirq);
+	data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
+	outw(data, port);
+}
+
+static void enable_m32700ut_lanpld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2lanpldirq(irq);
+	port = lanpldirq2port(pldirq);
+	data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
+	outw(data, port);
+}
+
+static void mask_and_ack_m32700ut_lanpld(unsigned int irq)
+{
+	disable_m32700ut_lanpld_irq(irq);
+}
+
+static void end_m32700ut_lanpld_irq(unsigned int irq)
+{
+	enable_m32700ut_lanpld_irq(irq);
+	end_m32700ut_irq(M32R_IRQ_INT0);
+}
+
+static unsigned int startup_m32700ut_lanpld_irq(unsigned int irq)
+{
+	enable_m32700ut_lanpld_irq(irq);
+	return (0);
+}
+
+static void shutdown_m32700ut_lanpld_irq(unsigned int irq)
+{
+	unsigned long port;
+	unsigned int pldirq;
+
+	pldirq = irq2lanpldirq(irq);
+	port = lanpldirq2port(pldirq);
+	outw(PLD_ICUCR_ILEVEL7, port);
+}
+
+static struct hw_interrupt_type m32700ut_lanpld_irq_type =
+{
+	"M32700UT-PLD-LAN-IRQ",
+	startup_m32700ut_lanpld_irq,
+	shutdown_m32700ut_lanpld_irq,
+	enable_m32700ut_lanpld_irq,
+	disable_m32700ut_lanpld_irq,
+	mask_and_ack_m32700ut_lanpld,
+	end_m32700ut_lanpld_irq
+};
+
+/*
+ * Interrupt Control Unit of PLD on M32700UT-LCD (Level 2)
+ */
+#define irq2lcdpldirq(x)	((x) - M32700UT_LCD_PLD_IRQ_BASE)
+#define lcdpldirq2port(x)	(unsigned long)((int)M32700UT_LCD_ICUCR1 + \
+				 (((x) - 1) * sizeof(unsigned short)))
+
+static pld_icu_data_t lcdpld_icu_data[M32700UT_NUM_LCD_PLD_IRQ];
+
+static void disable_m32700ut_lcdpld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2lcdpldirq(irq);
+	port = lcdpldirq2port(pldirq);
+	data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
+	outw(data, port);
+}
+
+static void enable_m32700ut_lcdpld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2lcdpldirq(irq);
+	port = lcdpldirq2port(pldirq);
+	data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
+	outw(data, port);
+}
+
+static void mask_and_ack_m32700ut_lcdpld(unsigned int irq)
+{
+	disable_m32700ut_lcdpld_irq(irq);
+}
+
+static void end_m32700ut_lcdpld_irq(unsigned int irq)
+{
+	enable_m32700ut_lcdpld_irq(irq);
+	end_m32700ut_irq(M32R_IRQ_INT2);
+}
+
+static unsigned int startup_m32700ut_lcdpld_irq(unsigned int irq)
+{
+	enable_m32700ut_lcdpld_irq(irq);
+	return (0);
+}
+
+static void shutdown_m32700ut_lcdpld_irq(unsigned int irq)
+{
+	unsigned long port;
+	unsigned int pldirq;
+
+	pldirq = irq2lcdpldirq(irq);
+	port = lcdpldirq2port(pldirq);
+	outw(PLD_ICUCR_ILEVEL7, port);
+}
+
+static struct hw_interrupt_type m32700ut_lcdpld_irq_type =
+{
+	"M32700UT-PLD-LCD-IRQ",
+	startup_m32700ut_lcdpld_irq,
+	shutdown_m32700ut_lcdpld_irq,
+	enable_m32700ut_lcdpld_irq,
+	disable_m32700ut_lcdpld_irq,
+	mask_and_ack_m32700ut_lcdpld,
+	end_m32700ut_lcdpld_irq
+};
+
+void __init init_IRQ(void)
+{
+#if defined(CONFIG_SMC91X)
+	/* INT#0: LAN controller on M32700UT-LAN (SMC91C111)*/
+	irq_desc[M32700UT_LAN_IRQ_LAN].status = IRQ_DISABLED;
+	irq_desc[M32700UT_LAN_IRQ_LAN].handler = &m32700ut_lanpld_irq_type;
+	irq_desc[M32700UT_LAN_IRQ_LAN].action = 0;
+	irq_desc[M32700UT_LAN_IRQ_LAN].depth = 1;	/* disable nested irq */
+	lanpld_icu_data[irq2lanpldirq(M32700UT_LAN_IRQ_LAN)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02;	/* "H" edge sense */
+	disable_m32700ut_lanpld_irq(M32700UT_LAN_IRQ_LAN);
+#endif  /* CONFIG_SMC91X */
+
+	/* MFT2 : system timer */
+	irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_MFT2].handler = &m32700ut_irq_type;
+	irq_desc[M32R_IRQ_MFT2].action = 0;
+	irq_desc[M32R_IRQ_MFT2].depth = 1;
+	icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN;
+	disable_m32700ut_irq(M32R_IRQ_MFT2);
+
+	/* SIO0 : receive */
+	irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO0_R].handler = &m32700ut_irq_type;
+	irq_desc[M32R_IRQ_SIO0_R].action = 0;
+	irq_desc[M32R_IRQ_SIO0_R].depth = 1;
+	icu_data[M32R_IRQ_SIO0_R].icucr = 0;
+	disable_m32700ut_irq(M32R_IRQ_SIO0_R);
+
+	/* SIO0 : send */
+	irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO0_S].handler = &m32700ut_irq_type;
+	irq_desc[M32R_IRQ_SIO0_S].action = 0;
+	irq_desc[M32R_IRQ_SIO0_S].depth = 1;
+	icu_data[M32R_IRQ_SIO0_S].icucr = 0;
+	disable_m32700ut_irq(M32R_IRQ_SIO0_S);
+
+	/* SIO1 : receive */
+	irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO1_R].handler = &m32700ut_irq_type;
+	irq_desc[M32R_IRQ_SIO1_R].action = 0;
+	irq_desc[M32R_IRQ_SIO1_R].depth = 1;
+	icu_data[M32R_IRQ_SIO1_R].icucr = 0;
+	disable_m32700ut_irq(M32R_IRQ_SIO1_R);
+
+	/* SIO1 : send */
+	irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO1_S].handler = &m32700ut_irq_type;
+	irq_desc[M32R_IRQ_SIO1_S].action = 0;
+	irq_desc[M32R_IRQ_SIO1_S].depth = 1;
+	icu_data[M32R_IRQ_SIO1_S].icucr = 0;
+	disable_m32700ut_irq(M32R_IRQ_SIO1_S);
+
+	/* DMA1 : */
+	irq_desc[M32R_IRQ_DMA1].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_DMA1].handler = &m32700ut_irq_type;
+	irq_desc[M32R_IRQ_DMA1].action = 0;
+	irq_desc[M32R_IRQ_DMA1].depth = 1;
+	icu_data[M32R_IRQ_DMA1].icucr = 0;
+	disable_m32700ut_irq(M32R_IRQ_DMA1);
+
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+	/* INT#1: SIO0 Receive on PLD */
+	irq_desc[PLD_IRQ_SIO0_RCV].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_SIO0_RCV].handler = &m32700ut_pld_irq_type;
+	irq_desc[PLD_IRQ_SIO0_RCV].action = 0;
+	irq_desc[PLD_IRQ_SIO0_RCV].depth = 1;	/* disable nested irq */
+	pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_RCV)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03;
+	disable_m32700ut_pld_irq(PLD_IRQ_SIO0_RCV);
+
+	/* INT#1: SIO0 Send on PLD */
+	irq_desc[PLD_IRQ_SIO0_SND].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_SIO0_SND].handler = &m32700ut_pld_irq_type;
+	irq_desc[PLD_IRQ_SIO0_SND].action = 0;
+	irq_desc[PLD_IRQ_SIO0_SND].depth = 1;	/* disable nested irq */
+	pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_SND)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03;
+	disable_m32700ut_pld_irq(PLD_IRQ_SIO0_SND);
+#endif  /* CONFIG_SERIAL_M32R_PLDSIO */
+
+	/* INT#1: CFC IREQ on PLD */
+	irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_CFIREQ].handler = &m32700ut_pld_irq_type;
+	irq_desc[PLD_IRQ_CFIREQ].action = 0;
+	irq_desc[PLD_IRQ_CFIREQ].depth = 1;	/* disable nested irq */
+	pld_icu_data[irq2pldirq(PLD_IRQ_CFIREQ)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01;	/* 'L' level sense */
+	disable_m32700ut_pld_irq(PLD_IRQ_CFIREQ);
+
+	/* INT#1: CFC Insert on PLD */
+	irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_CFC_INSERT].handler = &m32700ut_pld_irq_type;
+	irq_desc[PLD_IRQ_CFC_INSERT].action = 0;
+	irq_desc[PLD_IRQ_CFC_INSERT].depth = 1;	/* disable nested irq */
+	pld_icu_data[irq2pldirq(PLD_IRQ_CFC_INSERT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD00;	/* 'L' edge sense */
+	disable_m32700ut_pld_irq(PLD_IRQ_CFC_INSERT);
+
+	/* INT#1: CFC Eject on PLD */
+	irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_CFC_EJECT].handler = &m32700ut_pld_irq_type;
+	irq_desc[PLD_IRQ_CFC_EJECT].action = 0;
+	irq_desc[PLD_IRQ_CFC_EJECT].depth = 1;	/* disable nested irq */
+	pld_icu_data[irq2pldirq(PLD_IRQ_CFC_EJECT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02;	/* 'H' edge sense */
+	disable_m32700ut_pld_irq(PLD_IRQ_CFC_EJECT);
+
+	/*
+	 * INT0# is used for LAN, DIO
+	 * We enable it here.
+	 */
+	icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11;
+	enable_m32700ut_irq(M32R_IRQ_INT0);
+
+	/*
+	 * INT1# is used for UART, MMC, CF Controller in FPGA.
+	 * We enable it here.
+	 */
+	icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11;
+	enable_m32700ut_irq(M32R_IRQ_INT1);
+
+#if defined(CONFIG_USB)
+	outw(USBCR_OTGS, USBCR); 	/* USBCR: non-OTG */
+
+    irq_desc[M32700UT_LCD_IRQ_USB_INT1].status = IRQ_DISABLED;
+    irq_desc[M32700UT_LCD_IRQ_USB_INT1].handler = &m32700ut_lcdpld_irq_type;
+    irq_desc[M32700UT_LCD_IRQ_USB_INT1].action = 0;
+    irq_desc[M32700UT_LCD_IRQ_USB_INT1].depth = 1;
+    lcdpld_icu_data[irq2lcdpldirq(M32700UT_LCD_IRQ_USB_INT1)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01;	/* "L" level sense */
+    disable_m32700ut_lcdpld_irq(M32700UT_LCD_IRQ_USB_INT1);
+#endif
+	/*
+	 * INT2# is used for BAT, USB, AUDIO
+	 * We enable it here.
+	 */
+	icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01;
+	enable_m32700ut_irq(M32R_IRQ_INT2);
+
+//#if defined(CONFIG_VIDEO_M32R_AR)
+	/*
+	 * INT3# is used for AR
+	 */
+	irq_desc[M32R_IRQ_INT3].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_INT3].handler = &m32700ut_irq_type;
+	irq_desc[M32R_IRQ_INT3].action = 0;
+	irq_desc[M32R_IRQ_INT3].depth = 1;
+	icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
+	disable_m32700ut_irq(M32R_IRQ_INT3);
+//#endif	/* CONFIG_VIDEO_M32R_AR */
+}
+
+#define LAN_IOSTART     0x300
+#define LAN_IOEND       0x320
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start  = (LAN_IOSTART),
+		.end    = (LAN_IOEND),
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = M32700UT_LAN_IRQ_LAN,
+		.end    = M32700UT_LAN_IRQ_LAN,
+		.flags  = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources  = ARRAY_SIZE(smc91x_resources),
+	.resource       = smc91x_resources,
+};
+
+static int __init platform_init(void)
+{
+	platform_device_register(&smc91x_device);
+	return 0;
+}
+arch_initcall(platform_init);
diff --git a/arch/m32r/kernel/setup_mappi.c b/arch/m32r/kernel/setup_mappi.c
new file mode 100644
index 0000000..1e74110
--- /dev/null
+++ b/arch/m32r/kernel/setup_mappi.c
@@ -0,0 +1,160 @@
+/*
+ *  linux/arch/m32r/kernel/setup_mappi.c
+ *
+ *  Setup routines for Renesas MAPPI Board
+ *
+ *  Copyright (c) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
+ *                            Hitoshi Yamamoto
+ */
+
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/system.h>
+#include <asm/m32r.h>
+#include <asm/io.h>
+
+#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long)))
+
+#ifndef CONFIG_SMP
+typedef struct {
+	unsigned long icucr;  /* ICU Control Register */
+} icu_data_t;
+#endif /* CONFIG_SMP */
+
+icu_data_t icu_data[NR_IRQS];
+
+static void disable_mappi_irq(unsigned int irq)
+{
+	unsigned long port, data;
+
+	port = irq2port(irq);
+	data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7;
+	outl(data, port);
+}
+
+static void enable_mappi_irq(unsigned int irq)
+{
+	unsigned long port, data;
+
+	port = irq2port(irq);
+	data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6;
+	outl(data, port);
+}
+
+static void mask_and_ack_mappi(unsigned int irq)
+{
+	disable_mappi_irq(irq);
+}
+
+static void end_mappi_irq(unsigned int irq)
+{
+	enable_mappi_irq(irq);
+}
+
+static unsigned int startup_mappi_irq(unsigned int irq)
+{
+	enable_mappi_irq(irq);
+	return (0);
+}
+
+static void shutdown_mappi_irq(unsigned int irq)
+{
+	unsigned long port;
+
+	port = irq2port(irq);
+	outl(M32R_ICUCR_ILEVEL7, port);
+}
+
+static struct hw_interrupt_type mappi_irq_type =
+{
+	"MAPPI-IRQ",
+	startup_mappi_irq,
+	shutdown_mappi_irq,
+	enable_mappi_irq,
+	disable_mappi_irq,
+	mask_and_ack_mappi,
+	end_mappi_irq
+};
+
+void __init init_IRQ(void)
+{
+	static int once = 0;
+
+	if (once)
+		return;
+	else
+		once++;
+
+#ifdef CONFIG_NE2000
+	/* INT0 : LAN controller (RTL8019AS) */
+	irq_desc[M32R_IRQ_INT0].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_INT0].handler = &mappi_irq_type;
+	irq_desc[M32R_IRQ_INT0].action = 0;
+	irq_desc[M32R_IRQ_INT0].depth = 1;
+	icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
+	disable_mappi_irq(M32R_IRQ_INT0);
+#endif /* CONFIG_M32R_NE2000 */
+
+	/* MFT2 : system timer */
+	irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_MFT2].handler = &mappi_irq_type;
+	irq_desc[M32R_IRQ_MFT2].action = 0;
+	irq_desc[M32R_IRQ_MFT2].depth = 1;
+	icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN;
+	disable_mappi_irq(M32R_IRQ_MFT2);
+
+#ifdef CONFIG_SERIAL_M32R_SIO
+	/* SIO0_R : uart receive data */
+	irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO0_R].handler = &mappi_irq_type;
+	irq_desc[M32R_IRQ_SIO0_R].action = 0;
+	irq_desc[M32R_IRQ_SIO0_R].depth = 1;
+	icu_data[M32R_IRQ_SIO0_R].icucr = 0;
+	disable_mappi_irq(M32R_IRQ_SIO0_R);
+
+	/* SIO0_S : uart send data */
+	irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO0_S].handler = &mappi_irq_type;
+	irq_desc[M32R_IRQ_SIO0_S].action = 0;
+	irq_desc[M32R_IRQ_SIO0_S].depth = 1;
+	icu_data[M32R_IRQ_SIO0_S].icucr = 0;
+	disable_mappi_irq(M32R_IRQ_SIO0_S);
+
+	/* SIO1_R : uart receive data */
+	irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO1_R].handler = &mappi_irq_type;
+	irq_desc[M32R_IRQ_SIO1_R].action = 0;
+	irq_desc[M32R_IRQ_SIO1_R].depth = 1;
+	icu_data[M32R_IRQ_SIO1_R].icucr = 0;
+	disable_mappi_irq(M32R_IRQ_SIO1_R);
+
+	/* SIO1_S : uart send data */
+	irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO1_S].handler = &mappi_irq_type;
+	irq_desc[M32R_IRQ_SIO1_S].action = 0;
+	irq_desc[M32R_IRQ_SIO1_S].depth = 1;
+	icu_data[M32R_IRQ_SIO1_S].icucr = 0;
+	disable_mappi_irq(M32R_IRQ_SIO1_S);
+#endif /* CONFIG_SERIAL_M32R_SIO */
+
+#if defined(CONFIG_M32R_PCC)
+	/* INT1 : pccard0 interrupt */
+	irq_desc[M32R_IRQ_INT1].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_INT1].handler = &mappi_irq_type;
+	irq_desc[M32R_IRQ_INT1].action = 0;
+	irq_desc[M32R_IRQ_INT1].depth = 1;
+	icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD00;
+	disable_mappi_irq(M32R_IRQ_INT1);
+
+	/* INT2 : pccard1 interrupt */
+	irq_desc[M32R_IRQ_INT2].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_INT2].handler = &mappi_irq_type;
+	irq_desc[M32R_IRQ_INT2].action = 0;
+	irq_desc[M32R_IRQ_INT2].depth = 1;
+	icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD00;
+	disable_mappi_irq(M32R_IRQ_INT2);
+#endif /* CONFIG_M32RPCC */
+}
diff --git a/arch/m32r/kernel/setup_mappi2.c b/arch/m32r/kernel/setup_mappi2.c
new file mode 100644
index 0000000..1904d46
--- /dev/null
+++ b/arch/m32r/kernel/setup_mappi2.c
@@ -0,0 +1,212 @@
+/*
+ *  linux/arch/m32r/kernel/setup_mappi.c
+ *
+ *  Setup routines for Renesas MAPPI-II(M3A-ZA36) Board
+ *
+ *  Copyright (c) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
+ *                            Hitoshi Yamamoto, Mamoru Sakugawa
+ */
+
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/system.h>
+#include <asm/m32r.h>
+#include <asm/io.h>
+
+#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long)))
+
+#ifndef CONFIG_SMP
+typedef struct {
+	unsigned long icucr;  /* ICU Control Register */
+} icu_data_t;
+#endif /* CONFIG_SMP */
+
+icu_data_t icu_data[NR_IRQS];
+
+static void disable_mappi2_irq(unsigned int irq)
+{
+	unsigned long port, data;
+
+	if ((irq == 0) ||(irq >= NR_IRQS))  {
+		printk("bad irq 0x%08x\n", irq);
+		return;
+	}
+	port = irq2port(irq);
+	data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7;
+	outl(data, port);
+}
+
+static void enable_mappi2_irq(unsigned int irq)
+{
+	unsigned long port, data;
+
+	if ((irq == 0) ||(irq >= NR_IRQS))  {
+		printk("bad irq 0x%08x\n", irq);
+		return;
+	}
+	port = irq2port(irq);
+	data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6;
+	outl(data, port);
+}
+
+static void mask_and_ack_mappi2(unsigned int irq)
+{
+	disable_mappi2_irq(irq);
+}
+
+static void end_mappi2_irq(unsigned int irq)
+{
+	enable_mappi2_irq(irq);
+}
+
+static unsigned int startup_mappi2_irq(unsigned int irq)
+{
+	enable_mappi2_irq(irq);
+	return (0);
+}
+
+static void shutdown_mappi2_irq(unsigned int irq)
+{
+	unsigned long port;
+
+	port = irq2port(irq);
+	outl(M32R_ICUCR_ILEVEL7, port);
+}
+
+static struct hw_interrupt_type mappi2_irq_type =
+{
+	"MAPPI2-IRQ",
+	startup_mappi2_irq,
+	shutdown_mappi2_irq,
+	enable_mappi2_irq,
+	disable_mappi2_irq,
+	mask_and_ack_mappi2,
+	end_mappi2_irq
+};
+
+void __init init_IRQ(void)
+{
+#if defined(CONFIG_SMC91X)
+	/* INT0 : LAN controller (SMC91111) */
+	irq_desc[M32R_IRQ_INT0].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_INT0].handler = &mappi2_irq_type;
+	irq_desc[M32R_IRQ_INT0].action = 0;
+	irq_desc[M32R_IRQ_INT0].depth = 1;
+	icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
+	disable_mappi2_irq(M32R_IRQ_INT0);
+#endif  /* CONFIG_SMC91X */
+
+	/* MFT2 : system timer */
+	irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_MFT2].handler = &mappi2_irq_type;
+	irq_desc[M32R_IRQ_MFT2].action = 0;
+	irq_desc[M32R_IRQ_MFT2].depth = 1;
+	icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN;
+	disable_mappi2_irq(M32R_IRQ_MFT2);
+
+#ifdef CONFIG_SERIAL_M32R_SIO
+	/* SIO0_R : uart receive data */
+	irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO0_R].handler = &mappi2_irq_type;
+	irq_desc[M32R_IRQ_SIO0_R].action = 0;
+	irq_desc[M32R_IRQ_SIO0_R].depth = 1;
+	icu_data[M32R_IRQ_SIO0_R].icucr = 0;
+	disable_mappi2_irq(M32R_IRQ_SIO0_R);
+
+	/* SIO0_S : uart send data */
+	irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO0_S].handler = &mappi2_irq_type;
+	irq_desc[M32R_IRQ_SIO0_S].action = 0;
+	irq_desc[M32R_IRQ_SIO0_S].depth = 1;
+	icu_data[M32R_IRQ_SIO0_S].icucr = 0;
+	disable_mappi2_irq(M32R_IRQ_SIO0_S);
+	/* SIO1_R : uart receive data */
+	irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO1_R].handler = &mappi2_irq_type;
+	irq_desc[M32R_IRQ_SIO1_R].action = 0;
+	irq_desc[M32R_IRQ_SIO1_R].depth = 1;
+	icu_data[M32R_IRQ_SIO1_R].icucr = 0;
+	disable_mappi2_irq(M32R_IRQ_SIO1_R);
+
+	/* SIO1_S : uart send data */
+	irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO1_S].handler = &mappi2_irq_type;
+	irq_desc[M32R_IRQ_SIO1_S].action = 0;
+	irq_desc[M32R_IRQ_SIO1_S].depth = 1;
+	icu_data[M32R_IRQ_SIO1_S].icucr = 0;
+	disable_mappi2_irq(M32R_IRQ_SIO1_S);
+#endif  /* CONFIG_M32R_USE_DBG_CONSOLE */
+
+#if defined(CONFIG_USB)
+	/* INT1 : USB Host controller interrupt */
+	irq_desc[M32R_IRQ_INT1].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_INT1].handler = &mappi2_irq_type;
+	irq_desc[M32R_IRQ_INT1].action = 0;
+	irq_desc[M32R_IRQ_INT1].depth = 1;
+	icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD01;
+	disable_mappi2_irq(M32R_IRQ_INT1);
+#endif /* CONFIG_USB */
+
+	/* ICUCR40: CFC IREQ */
+	irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_CFIREQ].handler = &mappi2_irq_type;
+	irq_desc[PLD_IRQ_CFIREQ].action = 0;
+	irq_desc[PLD_IRQ_CFIREQ].depth = 1;	/* disable nested irq */
+//	icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00;
+	icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01;
+	disable_mappi2_irq(PLD_IRQ_CFIREQ);
+
+#if defined(CONFIG_M32R_CFC)
+	/* ICUCR41: CFC Insert */
+	irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_CFC_INSERT].handler = &mappi2_irq_type;
+	irq_desc[PLD_IRQ_CFC_INSERT].action = 0;
+	irq_desc[PLD_IRQ_CFC_INSERT].depth = 1;	/* disable nested irq */
+	icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00;
+//	icu_data[PLD_IRQ_CFC_INSERT].icucr = 0;
+	disable_mappi2_irq(PLD_IRQ_CFC_INSERT);
+
+	/* ICUCR42: CFC Eject */
+	irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_CFC_EJECT].handler = &mappi2_irq_type;
+	irq_desc[PLD_IRQ_CFC_EJECT].action = 0;
+	irq_desc[PLD_IRQ_CFC_EJECT].depth = 1;	/* disable nested irq */
+	icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
+//	icu_data[PLD_IRQ_CFC_EJECT].icucr = 0;
+	disable_mappi2_irq(PLD_IRQ_CFC_EJECT);
+
+#endif /* CONFIG_MAPPI2_CFC */
+}
+
+#define LAN_IOSTART     0x300
+#define LAN_IOEND       0x320
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start  = (LAN_IOSTART),
+		.end    = (LAN_IOEND),
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = M32R_IRQ_INT0,
+		.end    = M32R_IRQ_INT0,
+		.flags  = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources  = ARRAY_SIZE(smc91x_resources),
+	.resource       = smc91x_resources,
+};
+
+static int __init platform_init(void)
+{
+	platform_device_register(&smc91x_device);
+	return 0;
+}
+arch_initcall(platform_init);
diff --git a/arch/m32r/kernel/setup_oaks32r.c b/arch/m32r/kernel/setup_oaks32r.c
new file mode 100644
index 0000000..b048345
--- /dev/null
+++ b/arch/m32r/kernel/setup_oaks32r.c
@@ -0,0 +1,143 @@
+/*
+ *  linux/arch/m32r/kernel/setup_oaks32r.c
+ *
+ *  Setup routines for OAKS32R Board
+ *
+ *  Copyright (c) 2002-2004   Hiroyuki Kondo, Hirokazu Takata,
+ *                            Hitoshi Yamamoto, Mamoru Sakugawa
+ */
+
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/system.h>
+#include <asm/m32r.h>
+#include <asm/io.h>
+
+#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long)))
+
+#ifndef CONFIG_SMP
+typedef struct {
+	unsigned long icucr;  /* ICU Control Register */
+} icu_data_t;
+#endif /* CONFIG_SMP */
+
+icu_data_t icu_data[NR_IRQS];
+
+static void disable_oaks32r_irq(unsigned int irq)
+{
+	unsigned long port, data;
+
+	port = irq2port(irq);
+	data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7;
+	outl(data, port);
+}
+
+static void enable_oaks32r_irq(unsigned int irq)
+{
+	unsigned long port, data;
+
+	port = irq2port(irq);
+	data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6;
+	outl(data, port);
+}
+
+static void mask_and_ack_mappi(unsigned int irq)
+{
+	disable_oaks32r_irq(irq);
+}
+
+static void end_oaks32r_irq(unsigned int irq)
+{
+	enable_oaks32r_irq(irq);
+}
+
+static unsigned int startup_oaks32r_irq(unsigned int irq)
+{
+	enable_oaks32r_irq(irq);
+	return (0);
+}
+
+static void shutdown_oaks32r_irq(unsigned int irq)
+{
+	unsigned long port;
+
+	port = irq2port(irq);
+	outl(M32R_ICUCR_ILEVEL7, port);
+}
+
+static struct hw_interrupt_type oaks32r_irq_type =
+{
+	"OAKS32R-IRQ",
+	startup_oaks32r_irq,
+	shutdown_oaks32r_irq,
+	enable_oaks32r_irq,
+	disable_oaks32r_irq,
+	mask_and_ack_mappi,
+	end_oaks32r_irq
+};
+
+void __init init_IRQ(void)
+{
+	static int once = 0;
+
+	if (once)
+		return;
+	else
+		once++;
+
+#ifdef CONFIG_NE2000
+	/* INT3 : LAN controller (RTL8019AS) */
+	irq_desc[M32R_IRQ_INT3].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_INT3].handler = &oaks32r_irq_type;
+	irq_desc[M32R_IRQ_INT3].action = 0;
+	irq_desc[M32R_IRQ_INT3].depth = 1;
+	icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
+	disable_oaks32r_irq(M32R_IRQ_INT3);
+#endif /* CONFIG_M32R_NE2000 */
+
+	/* MFT2 : system timer */
+	irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_MFT2].handler = &oaks32r_irq_type;
+	irq_desc[M32R_IRQ_MFT2].action = 0;
+	irq_desc[M32R_IRQ_MFT2].depth = 1;
+	icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN;
+	disable_oaks32r_irq(M32R_IRQ_MFT2);
+
+#ifdef CONFIG_SERIAL_M32R_SIO
+	/* SIO0_R : uart receive data */
+	irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO0_R].handler = &oaks32r_irq_type;
+	irq_desc[M32R_IRQ_SIO0_R].action = 0;
+	irq_desc[M32R_IRQ_SIO0_R].depth = 1;
+	icu_data[M32R_IRQ_SIO0_R].icucr = 0;
+	disable_oaks32r_irq(M32R_IRQ_SIO0_R);
+
+	/* SIO0_S : uart send data */
+	irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO0_S].handler = &oaks32r_irq_type;
+	irq_desc[M32R_IRQ_SIO0_S].action = 0;
+	irq_desc[M32R_IRQ_SIO0_S].depth = 1;
+	icu_data[M32R_IRQ_SIO0_S].icucr = 0;
+	disable_oaks32r_irq(M32R_IRQ_SIO0_S);
+
+	/* SIO1_R : uart receive data */
+	irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO1_R].handler = &oaks32r_irq_type;
+	irq_desc[M32R_IRQ_SIO1_R].action = 0;
+	irq_desc[M32R_IRQ_SIO1_R].depth = 1;
+	icu_data[M32R_IRQ_SIO1_R].icucr = 0;
+	disable_oaks32r_irq(M32R_IRQ_SIO1_R);
+
+	/* SIO1_S : uart send data */
+	irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO1_S].handler = &oaks32r_irq_type;
+	irq_desc[M32R_IRQ_SIO1_S].action = 0;
+	irq_desc[M32R_IRQ_SIO1_S].depth = 1;
+	icu_data[M32R_IRQ_SIO1_S].icucr = 0;
+	disable_oaks32r_irq(M32R_IRQ_SIO1_S);
+#endif /* CONFIG_SERIAL_M32R_SIO */
+
+}
diff --git a/arch/m32r/kernel/setup_opsput.c b/arch/m32r/kernel/setup_opsput.c
new file mode 100644
index 0000000..84315e3
--- /dev/null
+++ b/arch/m32r/kernel/setup_opsput.c
@@ -0,0 +1,482 @@
+/*
+ *  linux/arch/m32r/kernel/setup_opsput.c
+ *
+ *  Setup routines for Renesas OPSPUT Board
+ *
+ *  Copyright (c) 2002-2004
+ * 	Hiroyuki Kondo, Hirokazu Takata,
+ *      Hitoshi Yamamoto, Takeo Takahashi, Mamoru Sakugawa
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file "COPYING" in the main directory of this
+ *  archive for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/system.h>
+#include <asm/m32r.h>
+#include <asm/io.h>
+
+/*
+ * OPSP Interrupt Control Unit (Level 1)
+ */
+#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long)))
+
+#ifndef CONFIG_SMP
+typedef struct {
+	unsigned long icucr;  /* ICU Control Register */
+} icu_data_t;
+#endif /* CONFIG_SMP */
+
+static icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
+
+static void disable_opsput_irq(unsigned int irq)
+{
+	unsigned long port, data;
+
+	port = irq2port(irq);
+	data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7;
+	outl(data, port);
+}
+
+static void enable_opsput_irq(unsigned int irq)
+{
+	unsigned long port, data;
+
+	port = irq2port(irq);
+	data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6;
+	outl(data, port);
+}
+
+static void mask_and_ack_opsput(unsigned int irq)
+{
+	disable_opsput_irq(irq);
+}
+
+static void end_opsput_irq(unsigned int irq)
+{
+	enable_opsput_irq(irq);
+}
+
+static unsigned int startup_opsput_irq(unsigned int irq)
+{
+	enable_opsput_irq(irq);
+	return (0);
+}
+
+static void shutdown_opsput_irq(unsigned int irq)
+{
+	unsigned long port;
+
+	port = irq2port(irq);
+	outl(M32R_ICUCR_ILEVEL7, port);
+}
+
+static struct hw_interrupt_type opsput_irq_type =
+{
+	"OPSPUT-IRQ",
+	startup_opsput_irq,
+	shutdown_opsput_irq,
+	enable_opsput_irq,
+	disable_opsput_irq,
+	mask_and_ack_opsput,
+	end_opsput_irq
+};
+
+/*
+ * Interrupt Control Unit of PLD on OPSPUT (Level 2)
+ */
+#define irq2pldirq(x)		((x) - OPSPUT_PLD_IRQ_BASE)
+#define pldirq2port(x)		(unsigned long)((int)PLD_ICUCR1 + \
+				 (((x) - 1) * sizeof(unsigned short)))
+
+typedef struct {
+	unsigned short icucr;  /* ICU Control Register */
+} pld_icu_data_t;
+
+static pld_icu_data_t pld_icu_data[OPSPUT_NUM_PLD_IRQ];
+
+static void disable_opsput_pld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2pldirq(irq);
+//	disable_opsput_irq(M32R_IRQ_INT1);
+	port = pldirq2port(pldirq);
+	data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
+	outw(data, port);
+}
+
+static void enable_opsput_pld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2pldirq(irq);
+//	enable_opsput_irq(M32R_IRQ_INT1);
+	port = pldirq2port(pldirq);
+	data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
+	outw(data, port);
+}
+
+static void mask_and_ack_opsput_pld(unsigned int irq)
+{
+	disable_opsput_pld_irq(irq);
+//	mask_and_ack_opsput(M32R_IRQ_INT1);
+}
+
+static void end_opsput_pld_irq(unsigned int irq)
+{
+	enable_opsput_pld_irq(irq);
+	end_opsput_irq(M32R_IRQ_INT1);
+}
+
+static unsigned int startup_opsput_pld_irq(unsigned int irq)
+{
+	enable_opsput_pld_irq(irq);
+	return (0);
+}
+
+static void shutdown_opsput_pld_irq(unsigned int irq)
+{
+	unsigned long port;
+	unsigned int pldirq;
+
+	pldirq = irq2pldirq(irq);
+//	shutdown_opsput_irq(M32R_IRQ_INT1);
+	port = pldirq2port(pldirq);
+	outw(PLD_ICUCR_ILEVEL7, port);
+}
+
+static struct hw_interrupt_type opsput_pld_irq_type =
+{
+	"OPSPUT-PLD-IRQ",
+	startup_opsput_pld_irq,
+	shutdown_opsput_pld_irq,
+	enable_opsput_pld_irq,
+	disable_opsput_pld_irq,
+	mask_and_ack_opsput_pld,
+	end_opsput_pld_irq
+};
+
+/*
+ * Interrupt Control Unit of PLD on OPSPUT-LAN (Level 2)
+ */
+#define irq2lanpldirq(x)	((x) - OPSPUT_LAN_PLD_IRQ_BASE)
+#define lanpldirq2port(x)	(unsigned long)((int)OPSPUT_LAN_ICUCR1 + \
+				 (((x) - 1) * sizeof(unsigned short)))
+
+static pld_icu_data_t lanpld_icu_data[OPSPUT_NUM_LAN_PLD_IRQ];
+
+static void disable_opsput_lanpld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2lanpldirq(irq);
+	port = lanpldirq2port(pldirq);
+	data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
+	outw(data, port);
+}
+
+static void enable_opsput_lanpld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2lanpldirq(irq);
+	port = lanpldirq2port(pldirq);
+	data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
+	outw(data, port);
+}
+
+static void mask_and_ack_opsput_lanpld(unsigned int irq)
+{
+	disable_opsput_lanpld_irq(irq);
+}
+
+static void end_opsput_lanpld_irq(unsigned int irq)
+{
+	enable_opsput_lanpld_irq(irq);
+	end_opsput_irq(M32R_IRQ_INT0);
+}
+
+static unsigned int startup_opsput_lanpld_irq(unsigned int irq)
+{
+	enable_opsput_lanpld_irq(irq);
+	return (0);
+}
+
+static void shutdown_opsput_lanpld_irq(unsigned int irq)
+{
+	unsigned long port;
+	unsigned int pldirq;
+
+	pldirq = irq2lanpldirq(irq);
+	port = lanpldirq2port(pldirq);
+	outw(PLD_ICUCR_ILEVEL7, port);
+}
+
+static struct hw_interrupt_type opsput_lanpld_irq_type =
+{
+	"OPSPUT-PLD-LAN-IRQ",
+	startup_opsput_lanpld_irq,
+	shutdown_opsput_lanpld_irq,
+	enable_opsput_lanpld_irq,
+	disable_opsput_lanpld_irq,
+	mask_and_ack_opsput_lanpld,
+	end_opsput_lanpld_irq
+};
+
+/*
+ * Interrupt Control Unit of PLD on OPSPUT-LCD (Level 2)
+ */
+#define irq2lcdpldirq(x)	((x) - OPSPUT_LCD_PLD_IRQ_BASE)
+#define lcdpldirq2port(x)	(unsigned long)((int)OPSPUT_LCD_ICUCR1 + \
+				 (((x) - 1) * sizeof(unsigned short)))
+
+static pld_icu_data_t lcdpld_icu_data[OPSPUT_NUM_LCD_PLD_IRQ];
+
+static void disable_opsput_lcdpld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2lcdpldirq(irq);
+	port = lcdpldirq2port(pldirq);
+	data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
+	outw(data, port);
+}
+
+static void enable_opsput_lcdpld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2lcdpldirq(irq);
+	port = lcdpldirq2port(pldirq);
+	data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
+	outw(data, port);
+}
+
+static void mask_and_ack_opsput_lcdpld(unsigned int irq)
+{
+	disable_opsput_lcdpld_irq(irq);
+}
+
+static void end_opsput_lcdpld_irq(unsigned int irq)
+{
+	enable_opsput_lcdpld_irq(irq);
+	end_opsput_irq(M32R_IRQ_INT2);
+}
+
+static unsigned int startup_opsput_lcdpld_irq(unsigned int irq)
+{
+	enable_opsput_lcdpld_irq(irq);
+	return (0);
+}
+
+static void shutdown_opsput_lcdpld_irq(unsigned int irq)
+{
+	unsigned long port;
+	unsigned int pldirq;
+
+	pldirq = irq2lcdpldirq(irq);
+	port = lcdpldirq2port(pldirq);
+	outw(PLD_ICUCR_ILEVEL7, port);
+}
+
+static struct hw_interrupt_type opsput_lcdpld_irq_type =
+{
+	"OPSPUT-PLD-LCD-IRQ",
+	startup_opsput_lcdpld_irq,
+	shutdown_opsput_lcdpld_irq,
+	enable_opsput_lcdpld_irq,
+	disable_opsput_lcdpld_irq,
+	mask_and_ack_opsput_lcdpld,
+	end_opsput_lcdpld_irq
+};
+
+void __init init_IRQ(void)
+{
+#if defined(CONFIG_SMC91X)
+	/* INT#0: LAN controller on OPSPUT-LAN (SMC91C111)*/
+	irq_desc[OPSPUT_LAN_IRQ_LAN].status = IRQ_DISABLED;
+	irq_desc[OPSPUT_LAN_IRQ_LAN].handler = &opsput_lanpld_irq_type;
+	irq_desc[OPSPUT_LAN_IRQ_LAN].action = 0;
+	irq_desc[OPSPUT_LAN_IRQ_LAN].depth = 1;	/* disable nested irq */
+	lanpld_icu_data[irq2lanpldirq(OPSPUT_LAN_IRQ_LAN)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02;	/* "H" edge sense */
+	disable_opsput_lanpld_irq(OPSPUT_LAN_IRQ_LAN);
+#endif  /* CONFIG_SMC91X */
+
+	/* MFT2 : system timer */
+	irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_MFT2].handler = &opsput_irq_type;
+	irq_desc[M32R_IRQ_MFT2].action = 0;
+	irq_desc[M32R_IRQ_MFT2].depth = 1;
+	icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN;
+	disable_opsput_irq(M32R_IRQ_MFT2);
+
+	/* SIO0 : receive */
+	irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO0_R].handler = &opsput_irq_type;
+	irq_desc[M32R_IRQ_SIO0_R].action = 0;
+	irq_desc[M32R_IRQ_SIO0_R].depth = 1;
+	icu_data[M32R_IRQ_SIO0_R].icucr = 0;
+	disable_opsput_irq(M32R_IRQ_SIO0_R);
+
+	/* SIO0 : send */
+	irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO0_S].handler = &opsput_irq_type;
+	irq_desc[M32R_IRQ_SIO0_S].action = 0;
+	irq_desc[M32R_IRQ_SIO0_S].depth = 1;
+	icu_data[M32R_IRQ_SIO0_S].icucr = 0;
+	disable_opsput_irq(M32R_IRQ_SIO0_S);
+
+	/* SIO1 : receive */
+	irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO1_R].handler = &opsput_irq_type;
+	irq_desc[M32R_IRQ_SIO1_R].action = 0;
+	irq_desc[M32R_IRQ_SIO1_R].depth = 1;
+	icu_data[M32R_IRQ_SIO1_R].icucr = 0;
+	disable_opsput_irq(M32R_IRQ_SIO1_R);
+
+	/* SIO1 : send */
+	irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO1_S].handler = &opsput_irq_type;
+	irq_desc[M32R_IRQ_SIO1_S].action = 0;
+	irq_desc[M32R_IRQ_SIO1_S].depth = 1;
+	icu_data[M32R_IRQ_SIO1_S].icucr = 0;
+	disable_opsput_irq(M32R_IRQ_SIO1_S);
+
+	/* DMA1 : */
+	irq_desc[M32R_IRQ_DMA1].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_DMA1].handler = &opsput_irq_type;
+	irq_desc[M32R_IRQ_DMA1].action = 0;
+	irq_desc[M32R_IRQ_DMA1].depth = 1;
+	icu_data[M32R_IRQ_DMA1].icucr = 0;
+	disable_opsput_irq(M32R_IRQ_DMA1);
+
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+	/* INT#1: SIO0 Receive on PLD */
+	irq_desc[PLD_IRQ_SIO0_RCV].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_SIO0_RCV].handler = &opsput_pld_irq_type;
+	irq_desc[PLD_IRQ_SIO0_RCV].action = 0;
+	irq_desc[PLD_IRQ_SIO0_RCV].depth = 1;	/* disable nested irq */
+	pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_RCV)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03;
+	disable_opsput_pld_irq(PLD_IRQ_SIO0_RCV);
+
+	/* INT#1: SIO0 Send on PLD */
+	irq_desc[PLD_IRQ_SIO0_SND].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_SIO0_SND].handler = &opsput_pld_irq_type;
+	irq_desc[PLD_IRQ_SIO0_SND].action = 0;
+	irq_desc[PLD_IRQ_SIO0_SND].depth = 1;	/* disable nested irq */
+	pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_SND)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03;
+	disable_opsput_pld_irq(PLD_IRQ_SIO0_SND);
+#endif  /* CONFIG_SERIAL_M32R_PLDSIO */
+
+#if defined(CONFIG_M32R_CFC)
+	/* INT#1: CFC IREQ on PLD */
+	irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_CFIREQ].handler = &opsput_pld_irq_type;
+	irq_desc[PLD_IRQ_CFIREQ].action = 0;
+	irq_desc[PLD_IRQ_CFIREQ].depth = 1;	/* disable nested irq */
+	pld_icu_data[irq2pldirq(PLD_IRQ_CFIREQ)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01;	/* 'L' level sense */
+	disable_opsput_pld_irq(PLD_IRQ_CFIREQ);
+
+	/* INT#1: CFC Insert on PLD */
+	irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_CFC_INSERT].handler = &opsput_pld_irq_type;
+	irq_desc[PLD_IRQ_CFC_INSERT].action = 0;
+	irq_desc[PLD_IRQ_CFC_INSERT].depth = 1;	/* disable nested irq */
+	pld_icu_data[irq2pldirq(PLD_IRQ_CFC_INSERT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD00;	/* 'L' edge sense */
+	disable_opsput_pld_irq(PLD_IRQ_CFC_INSERT);
+
+	/* INT#1: CFC Eject on PLD */
+	irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_CFC_EJECT].handler = &opsput_pld_irq_type;
+	irq_desc[PLD_IRQ_CFC_EJECT].action = 0;
+	irq_desc[PLD_IRQ_CFC_EJECT].depth = 1;	/* disable nested irq */
+	pld_icu_data[irq2pldirq(PLD_IRQ_CFC_EJECT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02;	/* 'H' edge sense */
+	disable_opsput_pld_irq(PLD_IRQ_CFC_EJECT);
+#endif /* CONFIG_M32R_CFC */
+
+
+	/*
+	 * INT0# is used for LAN, DIO
+	 * We enable it here.
+	 */
+	icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11;
+	enable_opsput_irq(M32R_IRQ_INT0);
+
+	/*
+	 * INT1# is used for UART, MMC, CF Controller in FPGA.
+	 * We enable it here.
+	 */
+	icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11;
+	enable_opsput_irq(M32R_IRQ_INT1);
+
+#if defined(CONFIG_USB)
+	outw(USBCR_OTGS, USBCR); 	/* USBCR: non-OTG */
+
+    irq_desc[OPSPUT_LCD_IRQ_USB_INT1].status = IRQ_DISABLED;
+    irq_desc[OPSPUT_LCD_IRQ_USB_INT1].handler = &opsput_lcdpld_irq_type;
+    irq_desc[OPSPUT_LCD_IRQ_USB_INT1].action = 0;
+    irq_desc[OPSPUT_LCD_IRQ_USB_INT1].depth = 1;
+    lcdpld_icu_data[irq2lcdpldirq(OPSPUT_LCD_IRQ_USB_INT1)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01;	/* "L" level sense */
+    disable_opsput_lcdpld_irq(OPSPUT_LCD_IRQ_USB_INT1);
+#endif
+	/*
+	 * INT2# is used for BAT, USB, AUDIO
+	 * We enable it here.
+	 */
+	icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01;
+	enable_opsput_irq(M32R_IRQ_INT2);
+
+//#if defined(CONFIG_VIDEO_M32R_AR)
+	/*
+	 * INT3# is used for AR
+	 */
+	irq_desc[M32R_IRQ_INT3].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_INT3].handler = &opsput_irq_type;
+	irq_desc[M32R_IRQ_INT3].action = 0;
+	irq_desc[M32R_IRQ_INT3].depth = 1;
+	icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
+	disable_opsput_irq(M32R_IRQ_INT3);
+//#endif	/* CONFIG_VIDEO_M32R_AR */
+}
+
+#define LAN_IOSTART     0x300
+#define LAN_IOEND       0x320
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start  = (LAN_IOSTART),
+		.end    = (LAN_IOEND),
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = OPSPUT_LAN_IRQ_LAN,
+		.end    = OPSPUT_LAN_IRQ_LAN,
+		.flags  = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources  = ARRAY_SIZE(smc91x_resources),
+	.resource       = smc91x_resources,
+};
+
+static int __init platform_init(void)
+{
+	platform_device_register(&smc91x_device);
+	return 0;
+}
+arch_initcall(platform_init);
diff --git a/arch/m32r/kernel/setup_usrv.c b/arch/m32r/kernel/setup_usrv.c
new file mode 100644
index 0000000..fe417be
--- /dev/null
+++ b/arch/m32r/kernel/setup_usrv.c
@@ -0,0 +1,256 @@
+/*
+ *  linux/arch/m32r/kernel/setup_usrv.c
+ *
+ *  Setup routines for MITSUBISHI uServer
+ *
+ *  Copyright (c) 2001, 2002, 2003  Hiroyuki Kondo, Hirokazu Takata,
+ *                                  Hitoshi Yamamoto
+ */
+
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/system.h>
+#include <asm/m32r.h>
+#include <asm/io.h>
+
+#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long)))
+
+#if !defined(CONFIG_SMP)
+typedef struct {
+	unsigned long icucr;	/* ICU Control Register */
+} icu_data_t;
+#endif /* CONFIG_SMP */
+
+icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
+
+static void disable_mappi_irq(unsigned int irq)
+{
+	unsigned long port, data;
+
+	port = irq2port(irq);
+	data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7;
+	outl(data, port);
+}
+
+static void enable_mappi_irq(unsigned int irq)
+{
+	unsigned long port, data;
+
+	port = irq2port(irq);
+	data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6;
+	outl(data, port);
+}
+
+static void mask_and_ack_mappi(unsigned int irq)
+{
+	disable_mappi_irq(irq);
+}
+
+static void end_mappi_irq(unsigned int irq)
+{
+	enable_mappi_irq(irq);
+}
+
+static unsigned int startup_mappi_irq(unsigned int irq)
+{
+	enable_mappi_irq(irq);
+	return 0;
+}
+
+static void shutdown_mappi_irq(unsigned int irq)
+{
+	unsigned long port;
+
+	port = irq2port(irq);
+	outl(M32R_ICUCR_ILEVEL7, port);
+}
+
+static struct hw_interrupt_type mappi_irq_type =
+{
+	"M32700-IRQ",
+	startup_mappi_irq,
+	shutdown_mappi_irq,
+	enable_mappi_irq,
+	disable_mappi_irq,
+	mask_and_ack_mappi,
+	end_mappi_irq
+};
+
+/*
+ * Interrupt Control Unit of PLD on M32700UT (Level 2)
+ */
+#define irq2pldirq(x)		((x) - M32700UT_PLD_IRQ_BASE)
+#define pldirq2port(x)		(unsigned long)((int)PLD_ICUCR1 + \
+				 (((x) - 1) * sizeof(unsigned short)))
+
+typedef struct {
+	unsigned short icucr;  /* ICU Control Register */
+} pld_icu_data_t;
+
+static pld_icu_data_t pld_icu_data[M32700UT_NUM_PLD_IRQ];
+
+static void disable_m32700ut_pld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2pldirq(irq);
+	port = pldirq2port(pldirq);
+	data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
+	outw(data, port);
+}
+
+static void enable_m32700ut_pld_irq(unsigned int irq)
+{
+	unsigned long port, data;
+	unsigned int pldirq;
+
+	pldirq = irq2pldirq(irq);
+	port = pldirq2port(pldirq);
+	data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
+	outw(data, port);
+}
+
+static void mask_and_ack_m32700ut_pld(unsigned int irq)
+{
+	disable_m32700ut_pld_irq(irq);
+}
+
+static void end_m32700ut_pld_irq(unsigned int irq)
+{
+	enable_m32700ut_pld_irq(irq);
+	end_mappi_irq(M32R_IRQ_INT1);
+}
+
+static unsigned int startup_m32700ut_pld_irq(unsigned int irq)
+{
+	enable_m32700ut_pld_irq(irq);
+	return 0;
+}
+
+static void shutdown_m32700ut_pld_irq(unsigned int irq)
+{
+	unsigned long port;
+	unsigned int pldirq;
+
+	pldirq = irq2pldirq(irq);
+	port = pldirq2port(pldirq);
+	outw(PLD_ICUCR_ILEVEL7, port);
+}
+
+static struct hw_interrupt_type m32700ut_pld_irq_type =
+{
+	"USRV-PLD-IRQ",
+	startup_m32700ut_pld_irq,
+	shutdown_m32700ut_pld_irq,
+	enable_m32700ut_pld_irq,
+	disable_m32700ut_pld_irq,
+	mask_and_ack_m32700ut_pld,
+	end_m32700ut_pld_irq
+};
+
+void __init init_IRQ(void)
+{
+	static int once = 0;
+	int i;
+
+	if (once)
+		return;
+	else
+		once++;
+
+	/* MFT2 : system timer */
+	irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_MFT2].handler = &mappi_irq_type;
+	irq_desc[M32R_IRQ_MFT2].action = 0;
+	irq_desc[M32R_IRQ_MFT2].depth = 1;
+	icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN;
+	disable_mappi_irq(M32R_IRQ_MFT2);
+
+#if defined(CONFIG_SERIAL_M32R_SIO)
+	/* SIO0_R : uart receive data */
+	irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO0_R].handler = &mappi_irq_type;
+	irq_desc[M32R_IRQ_SIO0_R].action = 0;
+	irq_desc[M32R_IRQ_SIO0_R].depth = 1;
+	icu_data[M32R_IRQ_SIO0_R].icucr = 0;
+	disable_mappi_irq(M32R_IRQ_SIO0_R);
+
+	/* SIO0_S : uart send data */
+	irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO0_S].handler = &mappi_irq_type;
+	irq_desc[M32R_IRQ_SIO0_S].action = 0;
+	irq_desc[M32R_IRQ_SIO0_S].depth = 1;
+	icu_data[M32R_IRQ_SIO0_S].icucr = 0;
+	disable_mappi_irq(M32R_IRQ_SIO0_S);
+
+	/* SIO1_R : uart receive data */
+	irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO1_R].handler = &mappi_irq_type;
+	irq_desc[M32R_IRQ_SIO1_R].action = 0;
+	irq_desc[M32R_IRQ_SIO1_R].depth = 1;
+	icu_data[M32R_IRQ_SIO1_R].icucr = 0;
+	disable_mappi_irq(M32R_IRQ_SIO1_R);
+
+	/* SIO1_S : uart send data */
+	irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED;
+	irq_desc[M32R_IRQ_SIO1_S].handler = &mappi_irq_type;
+	irq_desc[M32R_IRQ_SIO1_S].action = 0;
+	irq_desc[M32R_IRQ_SIO1_S].depth = 1;
+	icu_data[M32R_IRQ_SIO1_S].icucr = 0;
+	disable_mappi_irq(M32R_IRQ_SIO1_S);
+#endif  /* CONFIG_SERIAL_M32R_SIO */
+
+	/* INT#67-#71: CFC#0 IREQ on PLD */
+	for (i = 0 ; i < CONFIG_CFC_NUM ; i++ ) {
+		irq_desc[PLD_IRQ_CF0 + i].status = IRQ_DISABLED;
+		irq_desc[PLD_IRQ_CF0 + i].handler = &m32700ut_pld_irq_type;
+		irq_desc[PLD_IRQ_CF0 + i].action = 0;
+		irq_desc[PLD_IRQ_CF0 + i].depth = 1;	/* disable nested irq */
+		pld_icu_data[irq2pldirq(PLD_IRQ_CF0 + i)].icucr
+			= PLD_ICUCR_ISMOD01;	/* 'L' level sense */
+		disable_m32700ut_pld_irq(PLD_IRQ_CF0 + i);
+	}
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	/* INT#76: 16552D#0 IREQ on PLD */
+	irq_desc[PLD_IRQ_UART0].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_UART0].handler = &m32700ut_pld_irq_type;
+	irq_desc[PLD_IRQ_UART0].action = 0;
+	irq_desc[PLD_IRQ_UART0].depth = 1;	/* disable nested irq */
+	pld_icu_data[irq2pldirq(PLD_IRQ_UART0)].icucr
+		= PLD_ICUCR_ISMOD03;	/* 'H' level sense */
+	disable_m32700ut_pld_irq(PLD_IRQ_UART0);
+
+	/* INT#77: 16552D#1 IREQ on PLD */
+	irq_desc[PLD_IRQ_UART1].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_UART1].handler = &m32700ut_pld_irq_type;
+	irq_desc[PLD_IRQ_UART1].action = 0;
+	irq_desc[PLD_IRQ_UART1].depth = 1;	/* disable nested irq */
+	pld_icu_data[irq2pldirq(PLD_IRQ_UART1)].icucr
+		= PLD_ICUCR_ISMOD03;	/* 'H' level sense */
+	disable_m32700ut_pld_irq(PLD_IRQ_UART1);
+#endif	/* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */
+
+#if defined(CONFIG_IDC_AK4524) || defined(CONFIG_IDC_AK4524_MODULE)
+	/* INT#80: AK4524 IREQ on PLD */
+	irq_desc[PLD_IRQ_SNDINT].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_SNDINT].handler = &m32700ut_pld_irq_type;
+	irq_desc[PLD_IRQ_SNDINT].action = 0;
+	irq_desc[PLD_IRQ_SNDINT].depth = 1;	/* disable nested irq */
+	pld_icu_data[irq2pldirq(PLD_IRQ_SNDINT)].icucr
+		= PLD_ICUCR_ISMOD01;	/* 'L' level sense */
+	disable_m32700ut_pld_irq(PLD_IRQ_SNDINT);
+#endif	/* CONFIG_IDC_AK4524 || CONFIG_IDC_AK4524_MODULE */
+
+	/*
+	 * INT1# is used for UART, MMC, CF Controller in FPGA.
+	 * We enable it here.
+	 */
+	icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD11;
+	enable_mappi_irq(M32R_IRQ_INT1);
+}
+
diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
new file mode 100644
index 0000000..50311eb
--- /dev/null
+++ b/arch/m32r/kernel/signal.c
@@ -0,0 +1,438 @@
+/*
+ *  linux/arch/m32r/kernel/signal.c
+ *
+ *  Copyright (c) 2003  Hitoshi Yamamoto
+ *
+ *  Taken from i386 version.
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
+ *  1997-11-28  Modified for POSIX.1b signals by Richard Henderson
+ *  2000-06-20  Pentium III FXSR, SSE support by Gareth Hughes
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+int do_signal(struct pt_regs *, sigset_t *);
+
+asmlinkage int
+sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
+		  unsigned long r2, unsigned long r3, unsigned long r4,
+		  unsigned long r5, unsigned long r6, struct pt_regs regs)
+{
+	sigset_t saveset, newset;
+
+	/* XXX: Don't preclude handling different sized sigset_t's.  */
+	if (sigsetsize != sizeof(sigset_t))
+		return -EINVAL;
+
+	if (copy_from_user(&newset, unewset, sizeof(newset)))
+		return -EFAULT;
+	sigdelsetmask(&newset, ~_BLOCKABLE);
+
+	spin_lock_irq(&current->sighand->siglock);
+	saveset = current->blocked;
+	current->blocked = newset;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	regs.r0 = -EINTR;
+	while (1) {
+		current->state = TASK_INTERRUPTIBLE;
+		schedule();
+		if (do_signal(&regs, &saveset))
+			return regs.r0;
+	}
+}
+
+asmlinkage int
+sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
+		unsigned long r2, unsigned long r3, unsigned long r4,
+		unsigned long r5, unsigned long r6, struct pt_regs regs)
+{
+	return do_sigaltstack(uss, uoss, regs.spu);
+}
+
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+struct rt_sigframe
+{
+	int sig;
+	struct siginfo *pinfo;
+	void *puc;
+	struct siginfo info;
+	struct ucontext uc;
+//	struct _fpstate fpstate;
+};
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
+		   int *r0_p)
+{
+	unsigned int err = 0;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+#define COPY(x)		err |= __get_user(regs->x, &sc->sc_##x)
+	COPY(r4);
+	COPY(r5);
+	COPY(r6);
+	COPY(pt_regs);
+	/* COPY(r0); Skip r0 */
+	COPY(r1);
+	COPY(r2);
+	COPY(r3);
+	COPY(r7);
+	COPY(r8);
+	COPY(r9);
+	COPY(r10);
+	COPY(r11);
+	COPY(r12);
+#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
+	COPY(acc0h);
+	COPY(acc0l);
+	COPY(acc1h);
+	COPY(acc1l);
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+	COPY(acch);
+	COPY(accl);
+#else
+#error unknown isa configuration
+#endif
+	COPY(psw);
+	COPY(bpc);
+	COPY(bbpsw);
+	COPY(bbpc);
+	COPY(spu);
+	COPY(fp);
+	COPY(lr);
+	COPY(spi);
+#undef COPY
+
+	regs->syscall_nr = -1;	/* disable syscall checks */
+	err |= __get_user(*r0_p, &sc->sc_r0);
+
+	return err;
+}
+
+asmlinkage int
+sys_rt_sigreturn(unsigned long r0, unsigned long r1,
+		 unsigned long r2, unsigned long r3, unsigned long r4,
+		 unsigned long r5, unsigned long r6, struct pt_regs regs)
+{
+	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs.spu;
+	sigset_t set;
+	stack_t st;
+	int result;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	if (restore_sigcontext(&regs, &frame->uc.uc_mcontext, &result))
+		goto badframe;
+
+	if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
+		goto badframe;
+	/* It is more difficult to avoid calling this function than to
+	   call it and ignore errors.  */
+	do_sigaltstack(&st, NULL, regs.spu);
+
+	return result;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+static int
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
+	         unsigned long mask)
+{
+	int err = 0;
+
+#define COPY(x)	err |= __put_user(regs->x, &sc->sc_##x)
+	COPY(r4);
+	COPY(r5);
+	COPY(r6);
+	COPY(pt_regs);
+	COPY(r0);
+	COPY(r1);
+	COPY(r2);
+	COPY(r3);
+	COPY(r7);
+	COPY(r8);
+	COPY(r9);
+	COPY(r10);
+	COPY(r11);
+	COPY(r12);
+#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
+	COPY(acc0h);
+	COPY(acc0l);
+	COPY(acc1h);
+	COPY(acc1l);
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+	COPY(acch);
+	COPY(accl);
+#else
+#error unknown isa configuration
+#endif
+	COPY(psw);
+	COPY(bpc);
+	COPY(bbpsw);
+	COPY(bbpc);
+	COPY(spu);
+	COPY(fp);
+	COPY(lr);
+	COPY(spi);
+#undef COPY
+
+	err |= __put_user(mask, &sc->oldmask);
+
+	return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *
+get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
+{
+	/* This is the X/Open sanctioned signal stack switching.  */
+	if (ka->sa.sa_flags & SA_ONSTACK) {
+		if (sas_ss_flags(sp) == 0)
+			sp = current->sas_ss_sp + current->sas_ss_size;
+	}
+
+	return (void __user *)((sp - frame_size) & -8ul);
+}
+
+static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+			   sigset_t *set, struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+	int err = 0;
+	int signal;
+
+	frame = get_sigframe(ka, regs->spu, sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		goto give_sigsegv;
+
+	signal = current_thread_info()->exec_domain
+		&& current_thread_info()->exec_domain->signal_invmap
+		&& sig < 32
+		? current_thread_info()->exec_domain->signal_invmap[sig]
+		: sig;
+
+	err |= __put_user(signal, &frame->sig);
+	if (err)
+		goto give_sigsegv;
+
+	err |= __put_user(&frame->info, &frame->pinfo);
+	err |= __put_user(&frame->uc, &frame->puc);
+	err |= copy_siginfo_to_user(&frame->info, info);
+	if (err)
+		goto give_sigsegv;
+
+	/* Create the ucontext.  */
+	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(0, &frame->uc.uc_link);
+	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+	err |= __put_user(sas_ss_flags(regs->spu),
+			  &frame->uc.uc_stack.ss_flags);
+	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+	if (err)
+		goto give_sigsegv;
+
+	/* Set up to return from userspace.  */
+	regs->lr = (unsigned long)ka->sa.sa_restorer;
+
+	/* Set up registers for signal handler */
+	regs->spu = (unsigned long)frame;
+	regs->r0 = signal;	/* Arg for signal handler */
+	regs->r1 = (unsigned long)&frame->info;
+	regs->r2 = (unsigned long)&frame->uc;
+	regs->bpc = (unsigned long)ka->sa.sa_handler;
+
+	set_fs(USER_DS);
+
+#if DEBUG_SIG
+	printk("SIG deliver (%s:%d): sp=%p pc=%p\n",
+		current->comm, current->pid, frame, regs->pc);
+#endif
+
+	return;
+
+give_sigsegv:
+	force_sigsegv(sig, current);
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+
+static void
+handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
+	      sigset_t *oldset, struct pt_regs *regs)
+{
+	unsigned short inst;
+
+	/* Are we from a system call? */
+	if (regs->syscall_nr >= 0) {
+		/* If so, check system call restarting.. */
+		switch (regs->r0) {
+		        case -ERESTART_RESTARTBLOCK:
+			case -ERESTARTNOHAND:
+				regs->r0 = -EINTR;
+				break;
+
+			case -ERESTARTSYS:
+				if (!(ka->sa.sa_flags & SA_RESTART)) {
+					regs->r0 = -EINTR;
+					break;
+				}
+			/* fallthrough */
+			case -ERESTARTNOINTR:
+				regs->r0 = regs->orig_r0;
+				inst = *(unsigned short *)(regs->bpc - 2);
+				if ((inst & 0xfff0) == 0x10f0)	/* trap ? */
+					regs->bpc -= 2;
+				else
+					regs->bpc -= 4;
+		}
+	}
+
+	/* Set up the stack frame */
+	setup_rt_frame(sig, ka, info, oldset, regs);
+
+	if (!(ka->sa.sa_flags & SA_NODEFER)) {
+		spin_lock_irq(&current->sighand->siglock);
+		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
+		sigaddset(&current->blocked,sig);
+		recalc_sigpending();
+		spin_unlock_irq(&current->sighand->siglock);
+	}
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ */
+int do_signal(struct pt_regs *regs, sigset_t *oldset)
+{
+	siginfo_t info;
+	int signr;
+	struct k_sigaction ka;
+	unsigned short inst;
+
+	/*
+	 * We want the common case to go fast, which
+	 * is why we may in certain cases get here from
+	 * kernel mode. Just return without doing anything
+	 * if so.
+	 */
+	if (!user_mode(regs))
+		return 1;
+
+	if (current->flags & PF_FREEZE) {
+		refrigerator(0);
+		goto no_signal;
+	}
+
+	if (!oldset)
+		oldset = &current->blocked;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+	if (signr > 0) {
+		/* Reenable any watchpoints before delivering the
+		 * signal to user space. The processor register will
+		 * have been cleared if the watchpoint triggered
+		 * inside the kernel.
+		 */
+
+		/* Whee!  Actually deliver the signal.  */
+		handle_signal(signr, &ka, &info, oldset, regs);
+		return 1;
+	}
+
+ no_signal:
+	/* Did we come from a system call? */
+	if (regs->syscall_nr >= 0) {
+		/* Restart the system call - no handlers present */
+		if (regs->r0 == -ERESTARTNOHAND ||
+		    regs->r0 == -ERESTARTSYS ||
+		    regs->r0 == -ERESTARTNOINTR) {
+			regs->r0 = regs->orig_r0;
+			inst = *(unsigned short *)(regs->bpc - 2);
+			if ((inst & 0xfff0) == 0x10f0)	/* trap ? */
+				regs->bpc -= 2;
+			else
+				regs->bpc -= 4;
+		}
+		if (regs->r0 == -ERESTART_RESTARTBLOCK){
+			regs->r0 = regs->orig_r0;
+			regs->r7 = __NR_restart_syscall;
+			inst = *(unsigned short *)(regs->bpc - 2);
+			if ((inst & 0xfff0) == 0x10f0)	/* trap ? */
+				regs->bpc -= 2;
+			else
+				regs->bpc -= 4;
+		}
+	}
+	return 0;
+}
+
+/*
+ * notification of userspace execution resumption
+ * - triggered by current->work.notify_resume
+ */
+void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
+		      __u32 thread_info_flags)
+{
+	/* Pending single-step? */
+	if (thread_info_flags & _TIF_SINGLESTEP)
+		clear_thread_flag(TIF_SINGLESTEP);
+
+	/* deal with pending signal delivery */
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal(regs,oldset);
+
+	clear_thread_flag(TIF_IRET);
+}
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
new file mode 100644
index 0000000..48b187f
--- /dev/null
+++ b/arch/m32r/kernel/smp.c
@@ -0,0 +1,965 @@
+/*
+ *  linux/arch/m32r/kernel/smp.c
+ *
+ *  M32R SMP support routines.
+ *
+ *  Copyright (c) 2001, 2002  Hitoshi Yamamoto
+ *
+ *  Taken from i386 version.
+ *    (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ *    (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
+ *
+ *  This code is released under the GNU General Public License version 2 or
+ *  later.
+ */
+
+#undef DEBUG_SMP
+
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/profile.h>
+#include <linux/cpu.h>
+
+#include <asm/cacheflush.h>
+#include <asm/pgalloc.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/m32r.h>
+
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+/* Data structures and variables                                             */
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+
+/*
+ * Structure and data for smp_call_function(). This is designed to minimise
+ * static memory requirements. It also looks cleaner.
+ */
+static DEFINE_SPINLOCK(call_lock);
+
+struct call_data_struct {
+	void (*func) (void *info);
+	void *info;
+	atomic_t started;
+	atomic_t finished;
+	int wait;
+} __attribute__ ((__aligned__(SMP_CACHE_BYTES)));
+
+static struct call_data_struct *call_data;
+
+/*
+ * For flush_cache_all()
+ */
+static DEFINE_SPINLOCK(flushcache_lock);
+static volatile unsigned long flushcache_cpumask = 0;
+
+/*
+ * For flush_tlb_others()
+ */
+static volatile cpumask_t flush_cpumask;
+static struct mm_struct *flush_mm;
+static struct vm_area_struct *flush_vma;
+static volatile unsigned long flush_va;
+static DEFINE_SPINLOCK(tlbstate_lock);
+#define FLUSH_ALL 0xffffffff
+
+DECLARE_PER_CPU(int, prof_multiplier);
+DECLARE_PER_CPU(int, prof_old_multiplier);
+DECLARE_PER_CPU(int, prof_counter);
+
+extern spinlock_t ipi_lock[];
+
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+/* Function Prototypes                                                       */
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+
+void smp_send_reschedule(int);
+void smp_reschedule_interrupt(void);
+
+void smp_flush_cache_all(void);
+void smp_flush_cache_all_interrupt(void);
+
+void smp_flush_tlb_all(void);
+static void flush_tlb_all_ipi(void *);
+
+void smp_flush_tlb_mm(struct mm_struct *);
+void smp_flush_tlb_range(struct vm_area_struct *, unsigned long, \
+	unsigned long);
+void smp_flush_tlb_page(struct vm_area_struct *, unsigned long);
+static void flush_tlb_others(cpumask_t, struct mm_struct *,
+	struct vm_area_struct *, unsigned long);
+void smp_invalidate_interrupt(void);
+
+void smp_send_stop(void);
+static void stop_this_cpu(void *);
+
+int smp_call_function(void (*) (void *), void *, int, int);
+void smp_call_function_interrupt(void);
+
+void smp_send_timer(void);
+void smp_ipi_timer_interrupt(struct pt_regs *);
+void smp_local_timer_interrupt(struct pt_regs *);
+
+void send_IPI_allbutself(int, int);
+static void send_IPI_mask(cpumask_t, int, int);
+unsigned long send_IPI_mask_phys(cpumask_t, int, int);
+
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+/* Rescheduling request Routines                                             */
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+
+/*==========================================================================*
+ * Name:         smp_send_reschedule
+ *
+ * Description:  This routine requests other CPU to execute rescheduling.
+ *               1.Send 'RESCHEDULE_IPI' to other CPU.
+ *                 Request other CPU to execute 'smp_reschedule_interrupt()'.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    cpu_id - Target CPU ID
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+void smp_send_reschedule(int cpu_id)
+{
+	WARN_ON(cpu_is_offline(cpu_id));
+	send_IPI_mask(cpumask_of_cpu(cpu_id), RESCHEDULE_IPI, 1);
+}
+
+/*==========================================================================*
+ * Name:         smp_reschedule_interrupt
+ *
+ * Description:  This routine executes on CPU which received
+ *               'RESCHEDULE_IPI'.
+ *               Rescheduling is processed at the exit of interrupt
+ *               operation.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    NONE
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+void smp_reschedule_interrupt(void)
+{
+	/* nothing to do */
+}
+
+/*==========================================================================*
+ * Name:         smp_flush_cache_all
+ *
+ * Description:  This routine sends a 'INVALIDATE_CACHE_IPI' to all other
+ *               CPUs in the system.
+ *
+ * Born on Date: 2003-05-28
+ *
+ * Arguments:    NONE
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+void smp_flush_cache_all(void)
+{
+	cpumask_t cpumask;
+	unsigned long *mask;
+
+	preempt_disable();
+	cpumask = cpu_online_map;
+	cpu_clear(smp_processor_id(), cpumask);
+	spin_lock(&flushcache_lock);
+	mask=cpus_addr(cpumask);
+	atomic_set_mask(*mask, (atomic_t *)&flushcache_cpumask);
+	send_IPI_mask(cpumask, INVALIDATE_CACHE_IPI, 0);
+	_flush_cache_copyback_all();
+	while (flushcache_cpumask)
+		mb();
+	spin_unlock(&flushcache_lock);
+	preempt_enable();
+}
+
+void smp_flush_cache_all_interrupt(void)
+{
+	_flush_cache_copyback_all();
+	clear_bit(smp_processor_id(), &flushcache_cpumask);
+}
+
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+/* TLB flush request Routins                                                 */
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+
+/*==========================================================================*
+ * Name:         smp_flush_tlb_all
+ *
+ * Description:  This routine flushes all processes TLBs.
+ *               1.Request other CPU to execute 'flush_tlb_all_ipi()'.
+ *               2.Execute 'do_flush_tlb_all_local()'.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    NONE
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+void smp_flush_tlb_all(void)
+{
+	unsigned long flags;
+
+	preempt_disable();
+	local_irq_save(flags);
+	__flush_tlb_all();
+	local_irq_restore(flags);
+	smp_call_function(flush_tlb_all_ipi, 0, 1, 1);
+	preempt_enable();
+}
+
+/*==========================================================================*
+ * Name:         flush_tlb_all_ipi
+ *
+ * Description:  This routine flushes all local TLBs.
+ *               1.Execute 'do_flush_tlb_all_local()'.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    *info - not used
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+static void flush_tlb_all_ipi(void *info)
+{
+	__flush_tlb_all();
+}
+
+/*==========================================================================*
+ * Name:         smp_flush_tlb_mm
+ *
+ * Description:  This routine flushes the specified mm context TLB's.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    *mm - a pointer to the mm struct for flush TLB
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+void smp_flush_tlb_mm(struct mm_struct *mm)
+{
+	int cpu_id = smp_processor_id();
+	cpumask_t cpu_mask;
+	unsigned long *mmc = &mm->context[cpu_id];
+	unsigned long flags;
+
+	preempt_disable();
+	cpu_mask = mm->cpu_vm_mask;
+	cpu_clear(cpu_id, cpu_mask);
+
+	if (*mmc != NO_CONTEXT) {
+		local_irq_save(flags);
+		*mmc = NO_CONTEXT;
+		if (mm == current->mm)
+			activate_context(mm);
+		else
+			cpu_clear(cpu_id, mm->cpu_vm_mask);
+		local_irq_restore(flags);
+	}
+	if (!cpus_empty(cpu_mask))
+		flush_tlb_others(cpu_mask, mm, NULL, FLUSH_ALL);
+
+	preempt_enable();
+}
+
+/*==========================================================================*
+ * Name:         smp_flush_tlb_range
+ *
+ * Description:  This routine flushes a range of pages.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    *mm - a pointer to the mm struct for flush TLB
+ *               start - not used
+ *               end - not used
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+void smp_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+	unsigned long end)
+{
+	smp_flush_tlb_mm(vma->vm_mm);
+}
+
+/*==========================================================================*
+ * Name:         smp_flush_tlb_page
+ *
+ * Description:  This routine flushes one page.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    *vma - a pointer to the vma struct include va
+ *               va - virtual address for flush TLB
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	int cpu_id = smp_processor_id();
+	cpumask_t cpu_mask;
+	unsigned long *mmc = &mm->context[cpu_id];
+	unsigned long flags;
+
+	preempt_disable();
+	cpu_mask = mm->cpu_vm_mask;
+	cpu_clear(cpu_id, cpu_mask);
+
+#ifdef DEBUG_SMP
+	if (!mm)
+		BUG();
+#endif
+
+	if (*mmc != NO_CONTEXT) {
+		local_irq_save(flags);
+		va &= PAGE_MASK;
+		va |= (*mmc & MMU_CONTEXT_ASID_MASK);
+		__flush_tlb_page(va);
+		local_irq_restore(flags);
+	}
+	if (!cpus_empty(cpu_mask))
+		flush_tlb_others(cpu_mask, mm, vma, va);
+
+	preempt_enable();
+}
+
+/*==========================================================================*
+ * Name:         flush_tlb_others
+ *
+ * Description:  This routine requests other CPU to execute flush TLB.
+ *               1.Setup parmeters.
+ *               2.Send 'INVALIDATE_TLB_IPI' to other CPU.
+ *                 Request other CPU to execute 'smp_invalidate_interrupt()'.
+ *               3.Wait for other CPUs operation finished.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    cpumask - bitmap of target CPUs
+ *               *mm -  a pointer to the mm struct for flush TLB
+ *               *vma -  a pointer to the vma struct include va
+ *               va - virtual address for flush TLB
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
+	struct vm_area_struct *vma, unsigned long va)
+{
+	unsigned long *mask;
+#ifdef DEBUG_SMP
+	unsigned long flags;
+	__save_flags(flags);
+	if (!(flags & 0x0040))	/* Interrupt Disable NONONO */
+		BUG();
+#endif /* DEBUG_SMP */
+
+	/*
+	 * A couple of (to be removed) sanity checks:
+	 *
+	 * - we do not send IPIs to not-yet booted CPUs.
+	 * - current CPU must not be in mask
+	 * - mask must exist :)
+	 */
+	BUG_ON(cpus_empty(cpumask));
+
+	BUG_ON(cpu_isset(smp_processor_id(), cpumask));
+	BUG_ON(!mm);
+
+	/* If a CPU which we ran on has gone down, OK. */
+	cpus_and(cpumask, cpumask, cpu_online_map);
+	if (cpus_empty(cpumask))
+		return;
+
+	/*
+	 * i'm not happy about this global shared spinlock in the
+	 * MM hot path, but we'll see how contended it is.
+	 * Temporarily this turns IRQs off, so that lockups are
+	 * detected by the NMI watchdog.
+	 */
+	spin_lock(&tlbstate_lock);
+
+	flush_mm = mm;
+	flush_vma = vma;
+	flush_va = va;
+	mask=cpus_addr(cpumask);
+	atomic_set_mask(*mask, (atomic_t *)&flush_cpumask);
+
+	/*
+	 * We have to send the IPI only to
+	 * CPUs affected.
+	 */
+	send_IPI_mask(cpumask, INVALIDATE_TLB_IPI, 0);
+
+	while (!cpus_empty(flush_cpumask)) {
+		/* nothing. lockup detection does not belong here */
+		mb();
+	}
+
+	flush_mm = NULL;
+	flush_vma = NULL;
+	flush_va = 0;
+	spin_unlock(&tlbstate_lock);
+}
+
+/*==========================================================================*
+ * Name:         smp_invalidate_interrupt
+ *
+ * Description:  This routine executes on CPU which received
+ *               'INVALIDATE_TLB_IPI'.
+ *               1.Flush local TLB.
+ *               2.Report flush TLB process was finished.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    NONE
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+void smp_invalidate_interrupt(void)
+{
+	int cpu_id = smp_processor_id();
+	unsigned long *mmc = &flush_mm->context[cpu_id];
+
+	if (!cpu_isset(cpu_id, flush_cpumask))
+		return;
+
+	if (flush_va == FLUSH_ALL) {
+		*mmc = NO_CONTEXT;
+		if (flush_mm == current->active_mm)
+			activate_context(flush_mm);
+		else
+			cpu_clear(cpu_id, flush_mm->cpu_vm_mask);
+	} else {
+		unsigned long va = flush_va;
+
+		if (*mmc != NO_CONTEXT) {
+			va &= PAGE_MASK;
+			va |= (*mmc & MMU_CONTEXT_ASID_MASK);
+			__flush_tlb_page(va);
+		}
+	}
+	cpu_clear(cpu_id, flush_cpumask);
+}
+
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+/* Stop CPU request Routins                                                 */
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+
+/*==========================================================================*
+ * Name:         smp_send_stop
+ *
+ * Description:  This routine requests stop all CPUs.
+ *               1.Request other CPU to execute 'stop_this_cpu()'.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    NONE
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+void smp_send_stop(void)
+{
+	smp_call_function(stop_this_cpu, NULL, 1, 0);
+}
+
+/*==========================================================================*
+ * Name:         stop_this_cpu
+ *
+ * Description:  This routine halt CPU.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    NONE
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+static void stop_this_cpu(void *dummy)
+{
+	int cpu_id = smp_processor_id();
+
+	/*
+	 * Remove this CPU:
+	 */
+	cpu_clear(cpu_id, cpu_online_map);
+
+	/*
+	 * PSW IE = 1;
+	 * IMASK = 0;
+	 * goto SLEEP
+	 */
+	local_irq_disable();
+	outl(0, M32R_ICU_IMASK_PORTL);
+	inl(M32R_ICU_IMASK_PORTL);	/* dummy read */
+	local_irq_enable();
+
+	for ( ; ; );
+}
+
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+/* Call function Routins                                                     */
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+
+/*==========================================================================*
+ * Name:         smp_call_function
+ *
+ * Description:  This routine sends a 'CALL_FUNCTION_IPI' to all other CPUs
+ *               in the system.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    *func - The function to run. This must be fast and
+ *                       non-blocking.
+ *               *info - An arbitrary pointer to pass to the function.
+ *               nonatomic - currently unused.
+ *               wait - If true, wait (atomically) until function has
+ *                      completed on other CPUs.
+ *
+ * Returns:      0 on success, else a negative status code. Does not return
+ *               until remote CPUs are nearly ready to execute <<func>> or
+ *               are or have executed.
+ *
+ * Cautions:     You must not call this function with disabled interrupts or
+ *               from a hardware interrupt handler, you may call it from a
+ *               bottom half handler.
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
+	int wait)
+{
+	struct call_data_struct data;
+	int cpus;
+
+#ifdef DEBUG_SMP
+	unsigned long flags;
+	__save_flags(flags);
+	if (!(flags & 0x0040))	/* Interrupt Disable NONONO */
+		BUG();
+#endif /* DEBUG_SMP */
+
+	/* Holding any lock stops cpus from going down. */
+	spin_lock(&call_lock);
+	cpus = num_online_cpus() - 1;
+
+	if (!cpus) {
+		spin_unlock(&call_lock);
+		return 0;
+	}
+
+	/* Can deadlock when called with interrupts disabled */
+	WARN_ON(irqs_disabled());
+
+	data.func = func;
+	data.info = info;
+	atomic_set(&data.started, 0);
+	data.wait = wait;
+	if (wait)
+		atomic_set(&data.finished, 0);
+
+	call_data = &data;
+	mb();
+
+	/* Send a message to all other CPUs and wait for them to respond */
+	send_IPI_allbutself(CALL_FUNCTION_IPI, 0);
+
+	/* Wait for response */
+	while (atomic_read(&data.started) != cpus)
+		barrier();
+
+	if (wait)
+		while (atomic_read(&data.finished) != cpus)
+			barrier();
+	spin_unlock(&call_lock);
+
+	return 0;
+}
+
+/*==========================================================================*
+ * Name:         smp_call_function_interrupt
+ *
+ * Description:  This routine executes on CPU which received
+ *               'CALL_FUNCTION_IPI'.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    NONE
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+void smp_call_function_interrupt(void)
+{
+	void (*func) (void *info) = call_data->func;
+	void *info = call_data->info;
+	int wait = call_data->wait;
+
+	/*
+	 * Notify initiating CPU that I've grabbed the data and am
+	 * about to execute the function
+	 */
+	mb();
+	atomic_inc(&call_data->started);
+	/*
+	 * At this point the info structure may be out of scope unless wait==1
+	 */
+	irq_enter();
+	(*func)(info);
+	irq_exit();
+
+	if (wait) {
+		mb();
+		atomic_inc(&call_data->finished);
+	}
+}
+
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+/* Timer Routins                                                             */
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+
+/*==========================================================================*
+ * Name:         smp_send_timer
+ *
+ * Description:  This routine sends a 'LOCAL_TIMER_IPI' to all other CPUs
+ *               in the system.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    NONE
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+void smp_send_timer(void)
+{
+	send_IPI_allbutself(LOCAL_TIMER_IPI, 1);
+}
+
+/*==========================================================================*
+ * Name:         smp_send_timer
+ *
+ * Description:  This routine executes on CPU which received
+ *               'LOCAL_TIMER_IPI'.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    *regs - a pointer to the saved regster info
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+void smp_ipi_timer_interrupt(struct pt_regs *regs)
+{
+	irq_enter();
+	smp_local_timer_interrupt(regs);
+	irq_exit();
+}
+
+/*==========================================================================*
+ * Name:         smp_local_timer_interrupt
+ *
+ * Description:  Local timer interrupt handler. It does both profiling and
+ *               process statistics/rescheduling.
+ *               We do profiling in every local tick, statistics/rescheduling
+ *               happen only every 'profiling multiplier' ticks. The default
+ *               multiplier is 1 and it can be changed by writing the new
+ *               multiplier value into /proc/profile.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    *regs - a pointer to the saved regster info
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Original:     arch/i386/kernel/apic.c
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ * 2003-06-24 hy  use per_cpu structure.
+ *==========================================================================*/
+void smp_local_timer_interrupt(struct pt_regs *regs)
+{
+	int user = user_mode(regs);
+	int cpu_id = smp_processor_id();
+
+	/*
+	 * The profiling function is SMP safe. (nothing can mess
+	 * around with "current", and the profiling counters are
+	 * updated with atomic operations). This is especially
+	 * useful with a profiling multiplier != 1
+	 */
+
+	profile_tick(CPU_PROFILING, regs);
+
+	if (--per_cpu(prof_counter, cpu_id) <= 0) {
+		/*
+		 * The multiplier may have changed since the last time we got
+		 * to this point as a result of the user writing to
+		 * /proc/profile. In this case we need to adjust the APIC
+		 * timer accordingly.
+		 *
+		 * Interrupts are already masked off at this point.
+		 */
+		per_cpu(prof_counter, cpu_id)
+			= per_cpu(prof_multiplier, cpu_id);
+		if (per_cpu(prof_counter, cpu_id)
+			!= per_cpu(prof_old_multiplier, cpu_id))
+		{
+			per_cpu(prof_old_multiplier, cpu_id)
+				= per_cpu(prof_counter, cpu_id);
+		}
+
+		update_process_times(user);
+	}
+}
+
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+/* Send IPI Routins                                                          */
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+
+/*==========================================================================*
+ * Name:         send_IPI_allbutself
+ *
+ * Description:  This routine sends a IPI to all other CPUs in the system.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    ipi_num - Number of IPI
+ *               try -  0 : Send IPI certainly.
+ *                     !0 : The following IPI is not sended when Target CPU
+ *                          has not received the before IPI.
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+void send_IPI_allbutself(int ipi_num, int try)
+{
+	cpumask_t cpumask;
+
+	cpumask = cpu_online_map;
+	cpu_clear(smp_processor_id(), cpumask);
+
+	send_IPI_mask(cpumask, ipi_num, try);
+}
+
+/*==========================================================================*
+ * Name:         send_IPI_mask
+ *
+ * Description:  This routine sends a IPI to CPUs in the system.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    cpu_mask - Bitmap of target CPUs logical ID
+ *               ipi_num - Number of IPI
+ *               try -  0 : Send IPI certainly.
+ *                     !0 : The following IPI is not sended when Target CPU
+ *                          has not received the before IPI.
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+static void send_IPI_mask(cpumask_t cpumask, int ipi_num, int try)
+{
+	cpumask_t physid_mask, tmp;
+	int cpu_id, phys_id;
+	int num_cpus = num_online_cpus();
+
+	if (num_cpus <= 1)	/* NO MP */
+		return;
+
+	cpus_and(tmp, cpumask, cpu_online_map);
+	BUG_ON(!cpus_equal(cpumask, tmp));
+
+	physid_mask = CPU_MASK_NONE;
+	for_each_cpu_mask(cpu_id, cpumask){
+		if ((phys_id = cpu_to_physid(cpu_id)) != -1)
+			cpu_set(phys_id, physid_mask);
+	}
+
+	send_IPI_mask_phys(physid_mask, ipi_num, try);
+}
+
+/*==========================================================================*
+ * Name:         send_IPI_mask_phys
+ *
+ * Description:  This routine sends a IPI to other CPUs in the system.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    cpu_mask - Bitmap of target CPUs physical ID
+ *               ipi_num - Number of IPI
+ *               try -  0 : Send IPI certainly.
+ *                     !0 : The following IPI is not sended when Target CPU
+ *                          has not received the before IPI.
+ *
+ * Returns:      IPICRi regster value.
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ *
+ *==========================================================================*/
+unsigned long send_IPI_mask_phys(cpumask_t physid_mask, int ipi_num,
+	int try)
+{
+	spinlock_t *ipilock;
+	unsigned long flags = 0;
+	volatile unsigned long *ipicr_addr;
+	unsigned long ipicr_val;
+	unsigned long my_physid_mask;
+	unsigned long mask = cpus_addr(physid_mask)[0];
+
+
+	if (mask & ~physids_coerce(phys_cpu_present_map))
+		BUG();
+	if (ipi_num >= NR_IPIS)
+		BUG();
+
+	mask <<= IPI_SHIFT;
+	ipilock = &ipi_lock[ipi_num];
+	ipicr_addr = (volatile unsigned long *)(M32R_ICU_IPICR_ADDR
+		+ (ipi_num << 2));
+	my_physid_mask = ~(1 << smp_processor_id());
+
+	/*
+	 * lock ipi_lock[i]
+	 * check IPICRi == 0
+	 * write IPICRi (send IPIi)
+	 * unlock ipi_lock[i]
+	 */
+	__asm__ __volatile__ (
+		";; LOCK ipi_lock[i]		\n\t"
+		".fillinsn			\n"
+		"1:				\n\t"
+		"mvfc	%1, psw 		\n\t"
+		"clrpsw	#0x40 -> nop		\n\t"
+		DCACHE_CLEAR("r4", "r5", "%2")
+		"lock	r4, @%2			\n\t"
+		"addi	r4, #-1			\n\t"
+		"unlock	r4, @%2			\n\t"
+		"mvtc	%1, psw			\n\t"
+		"bnez	r4, 2f			\n\t"
+		LOCK_SECTION_START(".balign 4 \n\t")
+		".fillinsn			\n"
+		"2:				\n\t"
+		"ld	r4, @%2			\n\t"
+		"blez	r4, 2b			\n\t"
+		"bra	1b			\n\t"
+		LOCK_SECTION_END
+		";; CHECK IPICRi == 0		\n\t"
+		".fillinsn			\n"
+		"3:				\n\t"
+		"ld	%0, @%3			\n\t"
+		"and	%0, %6			\n\t"
+		"beqz	%0, 4f			\n\t"
+		"bnez	%5, 5f			\n\t"
+		"bra	3b			\n\t"
+		";; WRITE IPICRi (send IPIi)	\n\t"
+		".fillinsn			\n"
+		"4:				\n\t"
+		"st	%4, @%3			\n\t"
+		";; UNLOCK ipi_lock[i]		\n\t"
+		".fillinsn			\n"
+		"5:				\n\t"
+		"ldi	r4, #1			\n\t"
+		"st	r4, @%2			\n\t"
+		: "=&r"(ipicr_val)
+		: "r"(flags), "r"(&ipilock->slock), "r"(ipicr_addr),
+		  "r"(mask), "r"(try), "r"(my_physid_mask)
+		: "memory", "r4"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r5"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+
+	return ipicr_val;
+}
diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c
new file mode 100644
index 0000000..f9a0e72
--- /dev/null
+++ b/arch/m32r/kernel/smpboot.c
@@ -0,0 +1,630 @@
+/*
+ *  linux/arch/m32r/kernel/smpboot.c
+ *    orig : i386 2.4.10
+ *
+ *  M32R SMP booting functions
+ *
+ *  Copyright (c) 2001, 2002, 2003  Hitoshi Yamamoto
+ *
+ *  Taken from i386 version.
+ *	  (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ *	  (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ *
+ *	Much of the core SMP work is based on previous work by Thomas Radke, to
+ *	whom a great many thanks are extended.
+ *
+ *	Thanks to Intel for making available several different Pentium,
+ *	Pentium Pro and Pentium-II/Xeon MP machines.
+ *	Original development of Linux SMP code supported by Caldera.
+ *
+ *	This code is released under the GNU General Public License version 2 or
+ *	later.
+ *
+ *	Fixes
+ *		Felix Koop	:	NR_CPUS used properly
+ *		Jose Renau	:	Handle single CPU case.
+ *		Alan Cox	:	By repeated request
+ *					8) - Total BogoMIP report.
+ *		Greg Wright	:	Fix for kernel stacks panic.
+ *		Erich Boleyn	:	MP v1.4 and additional changes.
+ *	Matthias Sattler	:	Changes for 2.1 kernel map.
+ *	Michel Lespinasse	:	Changes for 2.1 kernel map.
+ *	Michael Chastain	:	Change trampoline.S to gnu as.
+ *		Alan Cox	:	Dumb bug: 'B' step PPro's are fine
+ *		Ingo Molnar	:	Added APIC timers, based on code
+ *					from Jose Renau
+ *		Ingo Molnar	:	various cleanups and rewrites
+ *		Tigran Aivazian	:	fixed "0.00 in /proc/uptime on SMP" bug.
+ *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs
+ *		Martin J. Bligh	: 	Added support for multi-quad systems
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/smp_lock.h>
+#include <linux/irq.h>
+#include <linux/bootmem.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+#define DEBUG_SMP
+#ifdef DEBUG_SMP
+#define Dprintk(x...) printk(x)
+#else
+#define Dprintk(x...)
+#endif
+
+extern cpumask_t cpu_initialized;
+
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+/* Data structures and variables                                             */
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+
+/* Processor that is doing the boot up */
+static unsigned int bsp_phys_id = -1;
+
+/* Bitmask of physically existing CPUs */
+physid_mask_t phys_cpu_present_map;
+
+/* Bitmask of currently online CPUs */
+cpumask_t cpu_online_map;
+
+cpumask_t cpu_bootout_map;
+cpumask_t cpu_bootin_map;
+cpumask_t cpu_callout_map;
+static cpumask_t cpu_callin_map;
+
+/* Per CPU bogomips and other parameters */
+struct cpuinfo_m32r cpu_data[NR_CPUS] __cacheline_aligned;
+
+static int cpucount;
+static cpumask_t smp_commenced_mask;
+
+extern struct {
+	void * spi;
+	unsigned short ss;
+} stack_start;
+
+/* which physical physical ID maps to which logical CPU number */
+static volatile int physid_2_cpu[NR_CPUS];
+
+/* which logical CPU number maps to which physical ID */
+volatile int cpu_2_physid[NR_CPUS];
+
+DEFINE_PER_CPU(int, prof_multiplier) = 1;
+DEFINE_PER_CPU(int, prof_old_multiplier) = 1;
+DEFINE_PER_CPU(int, prof_counter) = 1;
+
+spinlock_t ipi_lock[NR_IPIS];
+
+static unsigned int calibration_result;
+
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+/* Function Prototypes                                                       */
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+
+void smp_prepare_boot_cpu(void);
+void smp_prepare_cpus(unsigned int);
+static void smp_tune_scheduling(void);
+static void init_ipi_lock(void);
+static void do_boot_cpu(int);
+int __cpu_up(unsigned int);
+void smp_cpus_done(unsigned int);
+
+int start_secondary(void *);
+static void smp_callin(void);
+static void smp_online(void);
+
+static void show_mp_info(int);
+static void smp_store_cpu_info(int);
+static void show_cpu_info(int);
+int setup_profiling_timer(unsigned int);
+static void init_cpu_to_physid(void);
+static void map_cpu_to_physid(int, int);
+static void unmap_cpu_to_physid(int, int);
+
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+/* Boot up APs Routins : BSP                                                 */
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+void __devinit smp_prepare_boot_cpu(void)
+{
+	bsp_phys_id = hard_smp_processor_id();
+	physid_set(bsp_phys_id, phys_cpu_present_map);
+	cpu_set(0, cpu_online_map);	/* BSP's cpu_id == 0 */
+	cpu_set(0, cpu_callout_map);
+	cpu_set(0, cpu_callin_map);
+
+	/*
+	 * Initialize the logical to physical CPU number mapping
+	 */
+	init_cpu_to_physid();
+	map_cpu_to_physid(0, bsp_phys_id);
+	current_thread_info()->cpu = 0;
+}
+
+/*==========================================================================*
+ * Name:         smp_prepare_cpus (old smp_boot_cpus)
+ *
+ * Description:  This routine boot up APs.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    NONE
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ * 2003-06-24 hy  modify for linux-2.5.69
+ *
+ *==========================================================================*/
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	int phys_id;
+	unsigned long nr_cpu;
+
+	nr_cpu = inl(M32R_FPGA_NUM_OF_CPUS_PORTL);
+	if (nr_cpu > NR_CPUS) {
+		printk(KERN_INFO "NUM_OF_CPUS reg. value [%ld] > NR_CPU [%d]",
+			nr_cpu, NR_CPUS);
+		goto smp_done;
+	}
+	for (phys_id = 0 ; phys_id < nr_cpu ; phys_id++)
+		physid_set(phys_id, phys_cpu_present_map);
+
+	show_mp_info(nr_cpu);
+
+	init_ipi_lock();
+
+	/*
+	 * Setup boot CPU information
+	 */
+	smp_store_cpu_info(0); /* Final full version of the data */
+	smp_tune_scheduling();
+
+	/*
+	 * If SMP should be disabled, then really disable it!
+	 */
+	if (!max_cpus) {
+		printk(KERN_INFO "SMP mode deactivated by commandline.\n");
+		goto smp_done;
+	}
+
+	/*
+	 * Now scan the CPU present map and fire up the other CPUs.
+	 */
+	Dprintk("CPU present map : %lx\n", physids_coerce(phys_cpu_present_map));
+
+	for (phys_id = 0 ; phys_id < NR_CPUS ; phys_id++) {
+		/*
+		 * Don't even attempt to start the boot CPU!
+		 */
+		if (phys_id == bsp_phys_id)
+			continue;
+
+		if (!physid_isset(phys_id, phys_cpu_present_map))
+			continue;
+
+		if ((max_cpus >= 0) && (max_cpus <= cpucount + 1))
+			continue;
+
+		do_boot_cpu(phys_id);
+
+		/*
+		 * Make sure we unmap all failed CPUs
+		 */
+		if (physid_to_cpu(phys_id) == -1) {
+			physid_clear(phys_id, phys_cpu_present_map);
+			printk("phys CPU#%d not responding - " \
+				"cannot use it.\n", phys_id);
+		}
+	}
+
+smp_done:
+	Dprintk("Boot done.\n");
+}
+
+static void __init smp_tune_scheduling(void)
+{
+	/* Nothing to do. */
+}
+
+/*
+ * init_ipi_lock : Initialize IPI locks.
+ */
+static void __init init_ipi_lock(void)
+{
+	int ipi;
+
+	for (ipi = 0 ; ipi < NR_IPIS ; ipi++)
+		spin_lock_init(&ipi_lock[ipi]);
+}
+
+/*==========================================================================*
+ * Name:         do_boot_cpu
+ *
+ * Description:  This routine boot up one AP.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    phys_id - Target CPU physical ID
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ * 2003-06-24 hy  modify for linux-2.5.69
+ *
+ *==========================================================================*/
+static void __init do_boot_cpu(int phys_id)
+{
+	struct task_struct *idle;
+	unsigned long send_status, boot_status;
+	int timeout, cpu_id;
+
+	cpu_id = ++cpucount;
+
+	/*
+	 * We can't use kernel_thread since we must avoid to
+	 * reschedule the child.
+	 */
+	idle = fork_idle(cpu_id);
+	if (IS_ERR(idle))
+		panic("failed fork for CPU#%d.", cpu_id);
+
+	idle->thread.lr = (unsigned long)start_secondary;
+
+	map_cpu_to_physid(cpu_id, phys_id);
+
+	/* So we see what's up   */
+	printk("Booting processor %d/%d\n", phys_id, cpu_id);
+	stack_start.spi = (void *)idle->thread.sp;
+	idle->thread_info->cpu = cpu_id;
+
+	/*
+	 * Send Startup IPI
+	 *   1.IPI received by CPU#(phys_id).
+	 *   2.CPU#(phys_id) enter startup_AP (arch/m32r/kernel/head.S)
+	 *   3.CPU#(phys_id) enter start_secondary()
+	 */
+	send_status = 0;
+	boot_status = 0;
+
+	cpu_set(phys_id, cpu_bootout_map);
+
+	/* Send Startup IPI */
+	send_IPI_mask_phys(cpumask_of_cpu(phys_id), CPU_BOOT_IPI, 0);
+
+	Dprintk("Waiting for send to finish...\n");
+	timeout = 0;
+
+	/* Wait 100[ms] */
+	do {
+		Dprintk("+");
+		udelay(1000);
+		send_status = !cpu_isset(phys_id, cpu_bootin_map);
+	} while (send_status && (timeout++ < 100));
+
+	Dprintk("After Startup.\n");
+
+	if (!send_status) {
+		/*
+		 * allow APs to start initializing.
+		 */
+		Dprintk("Before Callout %d.\n", cpu_id);
+		cpu_set(cpu_id, cpu_callout_map);
+		Dprintk("After Callout %d.\n", cpu_id);
+
+		/*
+		 * Wait 5s total for a response
+		 */
+		for (timeout = 0; timeout < 5000; timeout++) {
+			if (cpu_isset(cpu_id, cpu_callin_map))
+				break;	/* It has booted */
+			udelay(1000);
+		}
+
+		if (cpu_isset(cpu_id, cpu_callin_map)) {
+			/* number CPUs logically, starting from 1 (BSP is 0) */
+			Dprintk("OK.\n");
+		} else {
+			boot_status = 1;
+			printk("Not responding.\n");
+		}
+	} else
+		printk("IPI never delivered???\n");
+
+	if (send_status || boot_status) {
+		unmap_cpu_to_physid(cpu_id, phys_id);
+		cpu_clear(cpu_id, cpu_callout_map);
+		cpu_clear(cpu_id, cpu_callin_map);
+		cpu_clear(cpu_id, cpu_initialized);
+		cpucount--;
+	}
+}
+
+int __devinit __cpu_up(unsigned int cpu_id)
+{
+	int timeout;
+
+	cpu_set(cpu_id, smp_commenced_mask);
+
+	/*
+	 * Wait 5s total for a response
+	 */
+	for (timeout = 0; timeout < 5000; timeout++) {
+		if (cpu_isset(cpu_id, cpu_online_map))
+			break;
+		udelay(1000);
+	}
+	if (!cpu_isset(cpu_id, cpu_online_map))
+		BUG();
+
+	return 0;
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+	int cpu_id, timeout;
+	unsigned long bogosum = 0;
+
+	for (timeout = 0; timeout < 5000; timeout++) {
+		if (cpus_equal(cpu_callin_map, cpu_online_map))
+			break;
+		udelay(1000);
+	}
+	if (!cpus_equal(cpu_callin_map, cpu_online_map))
+		BUG();
+
+	for (cpu_id = 0 ; cpu_id < num_online_cpus() ; cpu_id++)
+		show_cpu_info(cpu_id);
+
+	/*
+	 * Allow the user to impress friends.
+	 */
+	Dprintk("Before bogomips.\n");
+	if (cpucount) {
+		for_each_cpu_mask(cpu_id, cpu_online_map)
+			bogosum += cpu_data[cpu_id].loops_per_jiffy;
+
+		printk(KERN_INFO "Total of %d processors activated " \
+			"(%lu.%02lu BogoMIPS).\n", cpucount + 1,
+			bogosum / (500000 / HZ),
+			(bogosum / (5000 / HZ)) % 100);
+		Dprintk("Before bogocount - setting activated=1.\n");
+	}
+}
+
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+/* Activate a secondary processor Routins                                    */
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+
+/*==========================================================================*
+ * Name:         start_secondary
+ *
+ * Description:  This routine activate a secondary processor.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    *unused - currently unused.
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ * 2003-06-24 hy  modify for linux-2.5.69
+ *
+ *==========================================================================*/
+int __init start_secondary(void *unused)
+{
+	cpu_init();
+	smp_callin();
+	while (!cpu_isset(smp_processor_id(), smp_commenced_mask))
+		cpu_relax();
+
+	smp_online();
+
+	/*
+	 * low-memory mappings have been cleared, flush them from
+	 * the local TLBs too.
+	 */
+	local_flush_tlb_all();
+
+	cpu_idle();
+	return 0;
+}
+
+/*==========================================================================*
+ * Name:         smp_callin
+ *
+ * Description:  This routine activate a secondary processor.
+ *
+ * Born on Date: 2002.02.05
+ *
+ * Arguments:    NONE
+ *
+ * Returns:      void (cannot fail)
+ *
+ * Modification log:
+ * Date       Who Description
+ * ---------- --- --------------------------------------------------------
+ * 2003-06-24 hy  modify for linux-2.5.69
+ *
+ *==========================================================================*/
+static void __init smp_callin(void)
+{
+	int phys_id = hard_smp_processor_id();
+	int cpu_id = smp_processor_id();
+	unsigned long timeout;
+
+	if (cpu_isset(cpu_id, cpu_callin_map)) {
+		printk("huh, phys CPU#%d, CPU#%d already present??\n",
+			phys_id, cpu_id);
+		BUG();
+	}
+	Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpu_id, phys_id);
+
+	/* Waiting 2s total for startup (udelay is not yet working) */
+	timeout = jiffies + (2 * HZ);
+	while (time_before(jiffies, timeout)) {
+		/* Has the boot CPU finished it's STARTUP sequence ? */
+		if (cpu_isset(cpu_id, cpu_callout_map))
+			break;
+		cpu_relax();
+	}
+
+	if (!time_before(jiffies, timeout)) {
+		printk("BUG: CPU#%d started up but did not get a callout!\n",
+			cpu_id);
+		BUG();
+	}
+
+	/* Allow the master to continue. */
+	cpu_set(cpu_id, cpu_callin_map);
+}
+
+static void __init smp_online(void)
+{
+	int cpu_id = smp_processor_id();
+
+	local_irq_enable();
+
+	/* Get our bogomips. */
+	calibrate_delay();
+
+	/* Save our processor parameters */
+ 	smp_store_cpu_info(cpu_id);
+
+	cpu_set(cpu_id, cpu_online_map);
+}
+
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+/* Boot up CPUs common Routins                                               */
+/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
+static void __init show_mp_info(int nr_cpu)
+{
+	int i;
+	char cpu_model0[17], cpu_model1[17], cpu_ver[9];
+
+	strncpy(cpu_model0, (char *)M32R_FPGA_CPU_NAME_ADDR, 16);
+	strncpy(cpu_model1, (char *)M32R_FPGA_MODEL_ID_ADDR, 16);
+	strncpy(cpu_ver, (char *)M32R_FPGA_VERSION_ADDR, 8);
+
+	cpu_model0[16] = '\0';
+	for (i = 15 ; i >= 0 ; i--) {
+		if (cpu_model0[i] != ' ')
+			break;
+		cpu_model0[i] = '\0';
+	}
+	cpu_model1[16] = '\0';
+	for (i = 15 ; i >= 0 ; i--) {
+		if (cpu_model1[i] != ' ')
+			break;
+		cpu_model1[i] = '\0';
+	}
+	cpu_ver[8] = '\0';
+	for (i = 7 ; i >= 0 ; i--) {
+		if (cpu_ver[i] != ' ')
+			break;
+		cpu_ver[i] = '\0';
+	}
+
+	printk(KERN_INFO "M32R-mp information\n");
+	printk(KERN_INFO "  On-chip CPUs : %d\n", nr_cpu);
+	printk(KERN_INFO "  CPU model : %s/%s(%s)\n", cpu_model0,
+		cpu_model1, cpu_ver);
+}
+
+/*
+ * The bootstrap kernel entry code has set these up. Save them for
+ * a given CPU
+ */
+static void __init smp_store_cpu_info(int cpu_id)
+{
+	struct cpuinfo_m32r *ci = cpu_data + cpu_id;
+
+	*ci = boot_cpu_data;
+	ci->loops_per_jiffy = loops_per_jiffy;
+}
+
+static void __init show_cpu_info(int cpu_id)
+{
+	struct cpuinfo_m32r *ci = &cpu_data[cpu_id];
+
+	printk("CPU#%d : ", cpu_id);
+
+#define PRINT_CLOCK(name, value) \
+	printk(name " clock %d.%02dMHz", \
+		((value) / 1000000), ((value) % 1000000) / 10000)
+
+	PRINT_CLOCK("CPU", (int)ci->cpu_clock);
+	PRINT_CLOCK(", Bus", (int)ci->bus_clock);
+	printk(", loops_per_jiffy[%ld]\n", ci->loops_per_jiffy);
+}
+
+/*
+ * the frequency of the profiling timer can be changed
+ * by writing a multiplier value into /proc/profile.
+ */
+int setup_profiling_timer(unsigned int multiplier)
+{
+	int i;
+
+	/*
+	 * Sanity check. [at least 500 APIC cycles should be
+	 * between APIC interrupts as a rule of thumb, to avoid
+	 * irqs flooding us]
+	 */
+	if ( (!multiplier) || (calibration_result / multiplier < 500))
+		return -EINVAL;
+
+	/*
+	 * Set the new multiplier for each CPU. CPUs don't start using the
+	 * new values until the next timer interrupt in which they do process
+	 * accounting. At that time they also adjust their APIC timers
+	 * accordingly.
+	 */
+	for (i = 0; i < NR_CPUS; ++i)
+		per_cpu(prof_multiplier, i) = multiplier;
+
+	return 0;
+}
+
+/* Initialize all maps between cpu number and apicids */
+static void __init init_cpu_to_physid(void)
+{
+	int  i;
+
+	for (i = 0 ; i < NR_CPUS ; i++) {
+		cpu_2_physid[i] = -1;
+		physid_2_cpu[i] = -1;
+	}
+}
+
+/*
+ * set up a mapping between cpu and apicid. Uses logical apicids for multiquad,
+ * else physical apic ids
+ */
+static void __init map_cpu_to_physid(int cpu_id, int phys_id)
+{
+	physid_2_cpu[phys_id] = cpu_id;
+	cpu_2_physid[cpu_id] = phys_id;
+}
+
+/*
+ * undo a mapping between cpu and apicid. Uses logical apicids for multiquad,
+ * else physical apic ids
+ */
+static void __init unmap_cpu_to_physid(int cpu_id, int phys_id)
+{
+	physid_2_cpu[phys_id] = -1;
+	cpu_2_physid[cpu_id] = -1;
+}
+
diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c
new file mode 100644
index 0000000..e0500e1
--- /dev/null
+++ b/arch/m32r/kernel/sys_m32r.c
@@ -0,0 +1,217 @@
+/*
+ * linux/arch/m32r/kernel/sys_m32r.c
+ *
+ * This file contains various random system calls that
+ * have a non-standard calling sequence on the Linux/M32R platform.
+ *
+ * Taken from i386 version.
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/utsname.h>
+
+#include <asm/uaccess.h>
+#include <asm/cachectl.h>
+#include <asm/cacheflush.h>
+#include <asm/ipc.h>
+
+/*
+ * sys_tas() - test-and-set
+ * linuxthreads testing version
+ */
+#ifndef CONFIG_SMP
+asmlinkage int sys_tas(int *addr)
+{
+	int oldval;
+	unsigned long flags;
+
+	if (!access_ok(VERIFY_WRITE, addr, sizeof (int)))
+		return -EFAULT;
+	local_irq_save(flags);
+	oldval = *addr;
+	*addr = 1;
+	local_irq_restore(flags);
+	return oldval;
+}
+#else /* CONFIG_SMP */
+#include <linux/spinlock.h>
+
+static DEFINE_SPINLOCK(tas_lock);
+
+asmlinkage int sys_tas(int *addr)
+{
+	int oldval;
+
+	if (!access_ok(VERIFY_WRITE, addr, sizeof (int)))
+		return -EFAULT;
+
+	_raw_spin_lock(&tas_lock);
+	oldval = *addr;
+	*addr = 1;
+	_raw_spin_unlock(&tas_lock);
+
+	return oldval;
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way Unix traditionally does this, though.
+ */
+asmlinkage int
+sys_pipe(unsigned long r0, unsigned long r1, unsigned long r2,
+	unsigned long r3, unsigned long r4, unsigned long r5,
+	unsigned long r6, struct pt_regs regs)
+{
+	int fd[2];
+	int error;
+
+	error = do_pipe(fd);
+	if (!error) {
+		if (copy_to_user((void *)r0, (void *)fd, 2*sizeof(int)))
+			error = -EFAULT;
+	}
+	return error;
+}
+
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+	unsigned long prot, unsigned long flags,
+	unsigned long fd, unsigned long pgoff)
+{
+	int error = -EBADF;
+	struct file *file = NULL;
+
+	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+	if (!(flags & MAP_ANONYMOUS)) {
+		file = fget(fd);
+		if (!file)
+			goto out;
+	}
+
+	down_write(&current->mm->mmap_sem);
+	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+	up_write(&current->mm->mmap_sem);
+
+	if (file)
+		fput(file);
+out:
+	return error;
+}
+
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly.
+ */
+asmlinkage int sys_ipc(uint call, int first, int second,
+		       int third, void __user *ptr, long fifth)
+{
+	int version, ret;
+
+	version = call >> 16; /* hack for backward compatibility */
+	call &= 0xffff;
+
+	switch (call) {
+	case SEMOP:
+		return sys_semtimedop(first, (struct sembuf __user *)ptr,
+				      second, NULL);
+	case SEMTIMEDOP:
+		return sys_semtimedop(first, (struct sembuf __user *)ptr,
+				      second, (const struct timespec __user *)fifth);
+	case SEMGET:
+		return sys_semget (first, second, third);
+	case SEMCTL: {
+		union semun fourth;
+		if (!ptr)
+			return -EINVAL;
+		if (get_user(fourth.__pad, (void __user * __user *) ptr))
+			return -EFAULT;
+		return sys_semctl (first, second, third, fourth);
+		}
+
+	case MSGSND:
+		return sys_msgsnd (first, (struct msgbuf __user *) ptr,
+				   second, third);
+	case MSGRCV:
+		switch (version) {
+		case 0: {
+			struct ipc_kludge tmp;
+			if (!ptr)
+				return -EINVAL;
+
+			if (copy_from_user(&tmp,
+					   (struct ipc_kludge __user *) ptr,
+					   sizeof (tmp)))
+				return -EFAULT;
+			return sys_msgrcv (first, tmp.msgp, second,
+					   tmp.msgtyp, third);
+			}
+		default:
+			return sys_msgrcv (first,
+					   (struct msgbuf __user *) ptr,
+					   second, fifth, third);
+		}
+	case MSGGET:
+		return sys_msgget ((key_t) first, second);
+	case MSGCTL:
+		return sys_msgctl (first, second,
+				   (struct msqid_ds __user *) ptr);
+	case SHMAT: {
+		ulong raddr;
+
+		if (!access_ok(VERIFY_WRITE, (ulong __user *) third,
+				      sizeof(ulong)))
+			return -EFAULT;
+		ret = do_shmat (first, (char __user *) ptr, second, &raddr);
+		if (ret)
+			return ret;
+		return put_user (raddr, (ulong __user *) third);
+		}
+	case SHMDT:
+		return sys_shmdt ((char __user *)ptr);
+	case SHMGET:
+		return sys_shmget (first, second, third);
+	case SHMCTL:
+		return sys_shmctl (first, second,
+				   (struct shmid_ds __user *) ptr);
+	default:
+		return -ENOSYS;
+	}
+}
+
+asmlinkage int sys_uname(struct old_utsname * name)
+{
+	int err;
+	if (!name)
+		return -EFAULT;
+	down_read(&uts_sem);
+	err=copy_to_user(name, &system_utsname, sizeof (*name));
+	up_read(&uts_sem);
+	return err?-EFAULT:0;
+}
+
+asmlinkage int sys_cacheflush(void *addr, int bytes, int cache)
+{
+	/* This should flush more selectivly ...  */
+	_flush_cache_all();
+	return 0;
+}
+
+asmlinkage int sys_cachectl(char *addr, int nbytes, int op)
+{
+	/* Not implemented yet. */
+	return -ENOSYS;
+}
+
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
new file mode 100644
index 0000000..3c47072
--- /dev/null
+++ b/arch/m32r/kernel/time.c
@@ -0,0 +1,318 @@
+/*
+ *  linux/arch/m32r/kernel/time.c
+ *
+ *  Copyright (c) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
+ *                            Hitoshi Yamamoto
+ *  Taken from i386 version.
+ *    Copyright (C) 1991, 1992, 1995  Linus Torvalds
+ *    Copyright (C) 1996, 1997, 1998  Ralf Baechle
+ *
+ *  This file contains the time handling details for PC-style clocks as
+ *  found in some MIPS systems.
+ *
+ *  Some code taken from sh version.
+ *    Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
+ *    Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
+ */
+
+#undef  DEBUG_TIMER
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/profile.h>
+
+#include <asm/io.h>
+#include <asm/m32r.h>
+
+#include <asm/hw_irq.h>
+
+#ifdef CONFIG_SMP
+extern void send_IPI_allbutself(int, int);
+extern void smp_local_timer_interrupt(struct pt_regs *);
+#endif
+
+u64 jiffies_64 = INITIAL_JIFFIES;
+
+EXPORT_SYMBOL(jiffies_64);
+
+extern unsigned long wall_jiffies;
+#define TICK_SIZE	(tick_nsec / 1000)
+
+/*
+ * Change this if you have some constant time drift
+ */
+
+/* This is for machines which generate the exact clock. */
+#define USECS_PER_JIFFY (1000000/HZ)
+
+static unsigned long latch;
+
+static unsigned long do_gettimeoffset(void)
+{
+	unsigned long  elapsed_time = 0;  /* [us] */
+
+#if defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_XNUX2) \
+	|| defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_M32700) \
+	|| defined(CONFIG_CHIP_OPSP)
+#ifndef CONFIG_SMP
+
+	unsigned long count;
+
+	/* timer count may underflow right here */
+	count = inl(M32R_MFT2CUT_PORTL);
+
+	if (inl(M32R_ICU_CR18_PORTL) & 0x00000100)	/* underflow check */
+		count = 0;
+
+	count = (latch - count) * TICK_SIZE;
+	elapsed_time = (count + latch / 2) / latch;
+	/* NOTE: LATCH is equal to the "interval" value (= reload count). */
+
+#else /* CONFIG_SMP */
+	unsigned long count;
+	static unsigned long p_jiffies = -1;
+	static unsigned long p_count = 0;
+
+	/* timer count may underflow right here */
+	count = inl(M32R_MFT2CUT_PORTL);
+
+	if (jiffies == p_jiffies && count > p_count)
+		count = 0;
+
+	p_jiffies = jiffies;
+	p_count = count;
+
+	count = (latch - count) * TICK_SIZE;
+	elapsed_time = (count + latch / 2) / latch;
+	/* NOTE: LATCH is equal to the "interval" value (= reload count). */
+#endif /* CONFIG_SMP */
+#elif defined(CONFIG_CHIP_M32310)
+#warning do_gettimeoffse not implemented
+#else
+#error no chip configuration
+#endif
+
+	return elapsed_time;
+}
+
+/*
+ * This version of gettimeofday has near microsecond resolution.
+ */
+void do_gettimeofday(struct timeval *tv)
+{
+	unsigned long seq;
+	unsigned long usec, sec;
+	unsigned long max_ntp_tick = tick_usec - tickadj;
+
+	do {
+		unsigned long lost;
+
+		seq = read_seqbegin(&xtime_lock);
+
+		usec = do_gettimeoffset();
+		lost = jiffies - wall_jiffies;
+
+		/*
+		 * If time_adjust is negative then NTP is slowing the clock
+		 * so make sure not to go into next possible interval.
+		 * Better to lose some accuracy than have time go backwards..
+		 */
+		if (unlikely(time_adjust < 0)) {
+			usec = min(usec, max_ntp_tick);
+			if (lost)
+				usec += lost * max_ntp_tick;
+		} else if (unlikely(lost))
+			usec += lost * tick_usec;
+
+		sec = xtime.tv_sec;
+		usec += (xtime.tv_nsec / 1000);
+	} while (read_seqretry(&xtime_lock, seq));
+
+	while (usec >= 1000000) {
+		usec -= 1000000;
+		sec++;
+	}
+
+	tv->tv_sec = sec;
+	tv->tv_usec = usec;
+}
+
+EXPORT_SYMBOL(do_gettimeofday);
+
+int do_settimeofday(struct timespec *tv)
+{
+	time_t wtm_sec, sec = tv->tv_sec;
+ 	long wtm_nsec, nsec = tv->tv_nsec;
+
+	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+		return -EINVAL;
+
+	write_seqlock_irq(&xtime_lock);
+	/*
+	 * This is revolting. We need to set "xtime" correctly. However, the
+	 * value in this location is the value at the most recent update of
+	 * wall time.  Discover what correction gettimeofday() would have
+	 * made, and then undo it!
+	 */
+	nsec -= do_gettimeoffset() * NSEC_PER_USEC;
+	nsec -= (jiffies - wall_jiffies) * TICK_NSEC;
+
+	wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+	set_normalized_timespec(&xtime, sec, nsec);
+	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+	time_adjust = 0;		/* stop active adjtime() */
+	time_status |= STA_UNSYNC;
+	time_maxerror = NTP_PHASE_LIMIT;
+	time_esterror = NTP_PHASE_LIMIT;
+	write_sequnlock_irq(&xtime_lock);
+	clock_was_set();
+
+	return 0;
+}
+
+EXPORT_SYMBOL(do_settimeofday);
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ *      sets the minutes. Usually you won't notice until after reboot!
+ */
+static inline int set_rtc_mmss(unsigned long nowtime)
+{
+	return 0;
+}
+
+/* last time the cmos clock got updated */
+static long last_rtc_update = 0;
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+static inline void
+do_timer_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+#ifndef CONFIG_SMP
+	profile_tick(CPU_PROFILING, regs);
+#endif
+	do_timer(regs);
+
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+	/*
+	 * If we have an externally synchronized Linux clock, then update
+	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+	 * called as close as possible to 500 ms before the new second starts.
+	 */
+	if ((time_status & STA_UNSYNC) == 0
+		&& xtime.tv_sec > last_rtc_update + 660
+		&& (xtime.tv_nsec / 1000) >= 500000 - ((unsigned)TICK_SIZE) / 2
+		&& (xtime.tv_nsec / 1000) <= 500000 + ((unsigned)TICK_SIZE) / 2)
+	{
+		if (set_rtc_mmss(xtime.tv_sec) == 0)
+			last_rtc_update = xtime.tv_sec;
+		else	/* do it again in 60 s */
+			last_rtc_update = xtime.tv_sec - 600;
+	}
+	/* As we return to user mode fire off the other CPU schedulers..
+	   this is basically because we don't yet share IRQ's around.
+	   This message is rigged to be safe on the 386 - basically it's
+	   a hack, so don't look closely for now.. */
+
+#ifdef CONFIG_SMP
+	smp_local_timer_interrupt(regs);
+#endif
+}
+
+irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	write_seqlock(&xtime_lock);
+	do_timer_interrupt(irq, NULL, regs);
+	write_sequnlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE,
+			  "MFT2", NULL, NULL };
+
+void __init time_init(void)
+{
+	unsigned int epoch, year, mon, day, hour, min, sec;
+
+	sec = min = hour = day = mon = year = 0;
+	epoch = 0;
+
+	year = 23;
+	mon = 4;
+	day = 17;
+
+	/* Attempt to guess the epoch.  This is the same heuristic as in rtc.c
+	   so no stupid things will happen to timekeeping.  Who knows, maybe
+	   Ultrix also uses 1952 as epoch ...  */
+	if (year > 10 && year < 44)
+		epoch = 1980;
+	else if (year < 96)
+		epoch = 1952;
+	year += epoch;
+
+	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
+	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+	set_normalized_timespec(&wall_to_monotonic,
+		-xtime.tv_sec, -xtime.tv_nsec);
+
+#if defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_XNUX2) \
+	|| defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_M32700) \
+	|| defined(CONFIG_CHIP_OPSP)
+
+	/* M32102 MFT setup */
+	setup_irq(M32R_IRQ_MFT2, &irq0);
+	{
+		unsigned long bus_clock;
+		unsigned short divide;
+
+		bus_clock = boot_cpu_data.bus_clock;
+		divide = boot_cpu_data.timer_divide;
+		latch = (bus_clock/divide + HZ / 2) / HZ;
+
+		printk("Timer start : latch = %ld\n", latch);
+
+		outl((M32R_MFTMOD_CC_MASK | M32R_MFTMOD_TCCR \
+			|M32R_MFTMOD_CSSEL011), M32R_MFT2MOD_PORTL);
+		outl(latch, M32R_MFT2RLD_PORTL);
+		outl(latch, M32R_MFT2CUT_PORTL);
+		outl(0, M32R_MFT2CMPRLD_PORTL);
+		outl((M32R_MFTCR_MFT2MSK|M32R_MFTCR_MFT2EN), M32R_MFTCR_PORTL);
+	}
+
+#elif defined(CONFIG_CHIP_M32310)
+#warning time_init not implemented
+#else
+#error no chip configuration
+#endif
+}
+
+/*
+ *  Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+	return (unsigned long long)jiffies * (1000000000 / HZ);
+}
diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c
new file mode 100644
index 0000000..0192227
--- /dev/null
+++ b/arch/m32r/kernel/traps.c
@@ -0,0 +1,332 @@
+/*
+ *  linux/arch/m32r/kernel/traps.c
+ *
+ *  Copyright (C) 2001, 2002  Hirokazu Takata, Hiroyuki Kondo,
+ *                            Hitoshi Yamamoto
+ */
+
+/* $Id$ */
+
+/*
+ * 'traps.c' handles hardware traps and faults after we have saved some
+ * state in 'entry.S'.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/kallsyms.h>
+#include <linux/stddef.h>
+#include <linux/ptrace.h>
+#include <linux/mm.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+
+#include <asm/smp.h>
+
+#include <linux/module.h>
+
+asmlinkage void alignment_check(void);
+asmlinkage void ei_handler(void);
+asmlinkage void rie_handler(void);
+asmlinkage void debug_trap(void);
+asmlinkage void cache_flushing_handler(void);
+
+#ifdef CONFIG_SMP
+extern void smp_reschedule_interrupt(void);
+extern void smp_invalidate_interrupt(void);
+extern void smp_call_function_interrupt(void);
+extern void smp_ipi_timer_interrupt(void);
+extern void smp_flush_cache_all_interrupt(void);
+
+/*
+ * for Boot AP function
+ */
+asm (
+	"	.section .eit_vector4,\"ax\"	\n"
+	"	.global _AP_RE			\n"
+	"	.global startup_AP		\n"
+	"_AP_RE:				\n"
+	"	.fill 32, 4, 0			\n"
+	"_AP_EI: bra	startup_AP		\n"
+	"	.previous			\n"
+);
+#endif  /* CONFIG_SMP */
+
+extern unsigned long	eit_vector[];
+#define BRA_INSN(func, entry)	\
+	((unsigned long)func - (unsigned long)eit_vector - entry*4)/4 \
+	+ 0xff000000UL
+
+void	set_eit_vector_entries(void)
+{
+	extern void default_eit_handler(void);
+	extern void system_call(void);
+	extern void pie_handler(void);
+	extern void ace_handler(void);
+	extern void tme_handler(void);
+	extern void _flush_cache_copyback_all(void);
+
+	eit_vector[0] = 0xd0c00001; /* seth r0, 0x01 */
+	eit_vector[1] = BRA_INSN(default_eit_handler, 1);
+	eit_vector[4] = 0xd0c00010; /* seth r0, 0x10 */
+	eit_vector[5] = BRA_INSN(default_eit_handler, 5);
+	eit_vector[8] = BRA_INSN(rie_handler, 8);
+	eit_vector[12] = BRA_INSN(alignment_check, 12);
+	eit_vector[16] = 0xff000000UL;
+	eit_vector[17] = BRA_INSN(debug_trap, 17);
+	eit_vector[18] = BRA_INSN(system_call, 18);
+	eit_vector[19] = 0xff000000UL;
+	eit_vector[20] = 0xff000000UL;
+	eit_vector[21] = 0xff000000UL;
+	eit_vector[22] = 0xff000000UL;
+	eit_vector[23] = 0xff000000UL;
+	eit_vector[24] = 0xff000000UL;
+	eit_vector[25] = 0xff000000UL;
+	eit_vector[26] = 0xff000000UL;
+	eit_vector[27] = 0xff000000UL;
+	eit_vector[28] = BRA_INSN(cache_flushing_handler, 28);
+	eit_vector[29] = 0xff000000UL;
+	eit_vector[30] = 0xff000000UL;
+	eit_vector[31] = 0xff000000UL;
+	eit_vector[32] = BRA_INSN(ei_handler, 32);
+	eit_vector[64] = BRA_INSN(pie_handler, 64);
+#ifdef CONFIG_MMU
+	eit_vector[68] = BRA_INSN(ace_handler, 68);
+	eit_vector[72] = BRA_INSN(tme_handler, 72);
+#endif /* CONFIG_MMU */
+#ifdef CONFIG_SMP
+	eit_vector[184] = (unsigned long)smp_reschedule_interrupt;
+	eit_vector[185] = (unsigned long)smp_invalidate_interrupt;
+	eit_vector[186] = (unsigned long)smp_call_function_interrupt;
+	eit_vector[187] = (unsigned long)smp_ipi_timer_interrupt;
+	eit_vector[188] = (unsigned long)smp_flush_cache_all_interrupt;
+	eit_vector[189] = 0;
+	eit_vector[190] = 0;
+	eit_vector[191] = 0;
+#endif
+	_flush_cache_copyback_all();
+}
+
+void __init trap_init(void)
+{
+	set_eit_vector_entries();
+
+	/*
+	 * Should be a barrier for any external CPU state.
+	 */
+	cpu_init();
+}
+
+int kstack_depth_to_print = 24;
+
+void show_trace(struct task_struct *task, unsigned long *stack)
+{
+	unsigned long addr;
+
+	if (!stack)
+		stack = (unsigned long*)&stack;
+
+	printk("Call Trace: ");
+	while (!kstack_end(stack)) {
+		addr = *stack++;
+		if (__kernel_text_address(addr)) {
+			printk("[<%08lx>] ", addr);
+			print_symbol("%s\n", addr);
+		}
+	}
+	printk("\n");
+}
+
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+	unsigned long  *stack;
+	int  i;
+
+	/*
+	 * debugging aid: "show_stack(NULL);" prints the
+	 * back trace for this cpu.
+	 */
+
+	if(sp==NULL) {
+		if (task)
+			sp = (unsigned long *)task->thread.sp;
+		else
+			sp=(unsigned long*)&sp;
+	}
+
+	stack = sp;
+	for(i=0; i < kstack_depth_to_print; i++) {
+		if (kstack_end(stack))
+			break;
+		if (i && ((i % 4) == 0))
+			printk("\n       ");
+		printk("%08lx ", *stack++);
+	}
+	printk("\n");
+	show_trace(task, sp);
+}
+
+void dump_stack(void)
+{
+	unsigned long stack;
+
+	show_trace(current, &stack);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+static void show_registers(struct pt_regs *regs)
+{
+	int i = 0;
+	int in_kernel = 1;
+	unsigned long sp;
+
+	printk("CPU:    %d\n", smp_processor_id());
+	show_regs(regs);
+
+	sp = (unsigned long) (1+regs);
+	if (user_mode(regs)) {
+		in_kernel = 0;
+		sp = regs->spu;
+		printk("SPU: %08lx\n", sp);
+	} else {
+		printk("SPI: %08lx\n", sp);
+	}
+	printk("Process %s (pid: %d, process nr: %d, stackpage=%08lx)",
+		current->comm, current->pid, 0xffff & i, 4096+(unsigned long)current);
+
+	/*
+	 * When in-kernel, we also print out the stack and code at the
+	 * time of the fault..
+	 */
+	if (in_kernel) {
+		printk("\nStack: ");
+		show_stack(current, (unsigned long*) sp);
+
+		printk("\nCode: ");
+		if (regs->bpc < PAGE_OFFSET)
+			goto bad;
+
+		for(i=0;i<20;i++) {
+			unsigned char c;
+			if (__get_user(c, &((unsigned char*)regs->bpc)[i])) {
+bad:
+				printk(" Bad PC value.");
+				break;
+			}
+			printk("%02x ", c);
+		}
+	}
+	printk("\n");
+}
+
+DEFINE_SPINLOCK(die_lock);
+
+void die(const char * str, struct pt_regs * regs, long err)
+{
+	console_verbose();
+	spin_lock_irq(&die_lock);
+	bust_spinlocks(1);
+	printk("%s: %04lx\n", str, err & 0xffff);
+	show_registers(regs);
+	bust_spinlocks(0);
+	spin_unlock_irq(&die_lock);
+	do_exit(SIGSEGV);
+}
+
+static __inline__ void die_if_kernel(const char * str,
+	struct pt_regs * regs, long err)
+{
+	if (!user_mode(regs))
+		die(str, regs, err);
+}
+
+static __inline__ void do_trap(int trapnr, int signr, const char * str,
+	struct pt_regs * regs, long error_code, siginfo_t *info)
+{
+	if (user_mode(regs)) {
+		/* trap_signal */
+		struct task_struct *tsk = current;
+		tsk->thread.error_code = error_code;
+		tsk->thread.trap_no = trapnr;
+		if (info)
+			force_sig_info(signr, info, tsk);
+		else
+			force_sig(signr, tsk);
+		return;
+	} else {
+		/* kernel_trap */
+		if (!fixup_exception(regs))
+			die(str, regs, error_code);
+		return;
+	}
+}
+
+#define DO_ERROR(trapnr, signr, str, name) \
+asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
+{ \
+	do_trap(trapnr, signr, 0, regs, error_code, NULL); \
+}
+
+#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
+asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
+{ \
+	siginfo_t info; \
+	info.si_signo = signr; \
+	info.si_errno = 0; \
+	info.si_code = sicode; \
+	info.si_addr = (void __user *)siaddr; \
+	do_trap(trapnr, signr, str, regs, error_code, &info); \
+}
+
+DO_ERROR( 1, SIGTRAP, "debug trap", debug_trap)
+DO_ERROR_INFO(0x20, SIGILL,  "reserved instruction ", rie_handler, ILL_ILLOPC, regs->bpc)
+DO_ERROR_INFO(0x100, SIGILL,  "privilege instruction", pie_handler, ILL_PRVOPC, regs->bpc)
+
+extern int handle_unaligned_access(unsigned long, struct pt_regs *);
+
+/* This code taken from arch/sh/kernel/traps.c */
+asmlinkage void do_alignment_check(struct pt_regs *regs, long error_code)
+{
+	mm_segment_t oldfs;
+	unsigned long insn;
+	int tmp;
+
+	oldfs = get_fs();
+
+	if (user_mode(regs)) {
+		local_irq_enable();
+		current->thread.error_code = error_code;
+		current->thread.trap_no = 0x17;
+
+		set_fs(USER_DS);
+		if (copy_from_user(&insn, (void *)regs->bpc, 4)) {
+			set_fs(oldfs);
+			goto uspace_segv;
+		}
+		tmp = handle_unaligned_access(insn, regs);
+		set_fs(oldfs);
+
+		if (!tmp)
+			return;
+
+	uspace_segv:
+		printk(KERN_NOTICE "Killing process \"%s\" due to unaligned "
+			"access\n", current->comm);
+		force_sig(SIGSEGV, current);
+	} else {
+		set_fs(KERNEL_DS);
+		if (copy_from_user(&insn, (void *)regs->bpc, 4)) {
+			set_fs(oldfs);
+			die("insn faulting in do_address_error", regs, 0);
+		}
+		handle_unaligned_access(insn, regs);
+		set_fs(oldfs);
+	}
+}
+
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
new file mode 100644
index 0000000..729a264
--- /dev/null
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -0,0 +1,143 @@
+/* ld script to make M32R Linux kernel
+ */
+
+#include <linux/config.h>
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/addrspace.h>
+#include <asm/page.h>
+
+OUTPUT_ARCH(m32r)
+ENTRY(startup_32)
+#if defined(__LITTLE_ENDIAN__)
+       jiffies = jiffies_64;
+#else
+       jiffies = jiffies_64 + 4;
+#endif
+SECTIONS
+{
+  . = CONFIG_MEMORY_START + __PAGE_OFFSET;
+  eit_vector = .;
+
+  . = . + 0x1000;
+  .empty_zero_page : { *(.empty_zero_page) } = 0
+
+  /* read-only */
+  _text = .;			/* Text and read-only data */
+  .boot : { *(.boot) } = 0
+  .text : {
+	*(.text)
+	SCHED_TEXT
+	LOCK_TEXT
+	*(.fixup)
+	*(.gnu.warning)
+	} = 0x9090
+#ifdef CONFIG_SMP
+  . = ALIGN(65536);
+  .eit_vector4 : { *(.eit_vector4) }
+#endif
+  _etext = .;			/* End of text section */
+
+  . = ALIGN(16);		/* Exception table */
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  RODATA
+
+  /* writeable */
+  .data : {			/* Data */
+	*(.spu)
+	*(.spi)
+	*(.data)
+	CONSTRUCTORS
+	}
+
+  . = ALIGN(4096);
+  __nosave_begin = .;
+  .data_nosave : { *(.data.nosave) }
+  . = ALIGN(4096);
+  __nosave_end = .;
+
+  . = ALIGN(4096);
+  .data.page_aligned : { *(.data.idt) }
+
+  . = ALIGN(32);
+  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+  _edata = .;			/* End of data section */
+
+  . = ALIGN(8192);		/* init_task */
+  .data.init_task : { *(.data.init_task) }
+
+  /* will be freed after init */
+  . = ALIGN(4096);		/* Init code and data */
+  __init_begin = .;
+  .init.text : {
+	_sinittext = .;
+	*(.init.text)
+	_einittext = .;
+  }
+  .init.data : { *(.init.data) }
+  . = ALIGN(16);
+  __setup_start = .;
+  .init.setup : { *(.init.setup) }
+  __setup_end = .;
+  __initcall_start = .;
+  .initcall.init : {
+	*(.initcall1.init)
+	*(.initcall2.init)
+	*(.initcall3.init)
+	*(.initcall4.init)
+	*(.initcall5.init)
+	*(.initcall6.init)
+	*(.initcall7.init)
+  }
+  __initcall_end = .;
+  __con_initcall_start = .;
+  .con_initcall.init : { *(.con_initcall.init) }
+  __con_initcall_end = .;
+  SECURITY_INIT
+  . = ALIGN(4);
+  __alt_instructions = .;
+  .altinstructions : { *(.altinstructions) }
+  __alt_instructions_end = .;
+  .altinstr_replacement : { *(.altinstr_replacement) }
+  /* .exit.text is discard at runtime, not link time, to deal with references
+     from .altinstructions and .eh_frame */
+  .exit.text : { *(.exit.text) }
+  .exit.data : { *(.exit.data) }
+  . = ALIGN(4096);
+  __initramfs_start = .;
+  .init.ramfs : { *(.init.ramfs) }
+  __initramfs_end = .;
+  . = ALIGN(32);
+  __per_cpu_start = .;
+  .data.percpu  : { *(.data.percpu) }
+  __per_cpu_end = .;
+  . = ALIGN(4096);
+  __init_end = .;
+  /* freed after init ends here */
+
+  __bss_start = .;		/* BSS */
+  .bss : { *(.bss) }
+  . = ALIGN(4);
+  __bss_stop = .;
+
+  _end = . ;
+
+  /* Sections to be discarded */
+  /DISCARD/ : {
+	*(.exit.text)
+	*(.exit.data)
+	*(.exitcall.exit)
+	}
+
+  /* Stabs debugging sections.  */
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  .stab.excl 0 : { *(.stab.excl) }
+  .stab.exclstr 0 : { *(.stab.exclstr) }
+  .stab.index 0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment 0 : { *(.comment) }
+}
diff --git a/arch/m32r/lib/Makefile b/arch/m32r/lib/Makefile
new file mode 100644
index 0000000..e632d10
--- /dev/null
+++ b/arch/m32r/lib/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for M32R-specific library files..
+#
+
+lib-y  := checksum.o ashxdi3.o memset.o memcpy.o getuser.o \
+	  putuser.o delay.o strlen.o usercopy.o csum_partial_copy.o
+
diff --git a/arch/m32r/lib/ashxdi3.S b/arch/m32r/lib/ashxdi3.S
new file mode 100644
index 0000000..78effca
--- /dev/null
+++ b/arch/m32r/lib/ashxdi3.S
@@ -0,0 +1,297 @@
+/*
+ * linux/arch/m32r/lib/ashxdi3.S
+ *
+ * Copyright (C) 2001,2002  Hiroyuki Kondo, and Hirokazu Takata
+ *
+ */
+/* $Id$ */
+
+#include <linux/config.h>
+
+;
+;      input   (r0,r1)  src
+;      input    r2      shift val
+;               r3      scratch
+;      output  (r0,r1)
+;
+
+#ifdef CONFIG_ISA_DUAL_ISSUE
+
+#ifndef __LITTLE_ENDIAN__
+
+	.text
+	.align	4
+	.globl __ashrdi3
+__ashrdi3:
+	cmpz	r2		    ||	ldi	r3, #32
+	jc	r14		    ||	cmpu	r2, r3
+	bc      1f
+    ;   case 32 =< shift
+	mv      r1, r0		    ||	srai    r0, #31
+	addi    r2, #-32
+	sra     r1, r2
+	jmp     r14
+	.fillinsn
+1:  ;   case shift <32
+	mv      r3, r0		    ||	srl     r1, r2
+	sra     r0, r2		    ||	neg     r2, r2
+	sll     r3, r2
+	or      r1, r3		    ||	jmp	r14
+
+        .align  4
+        .globl __ashldi3
+        .globl __lshldi3
+__ashldi3:
+__lshldi3:
+	cmpz	r2		    ||	ldi	r3, #32
+	jc	r14		    ||	cmpu	r2, r3
+	bc      1f
+    ;   case 32 =< shift
+	mv      r0, r1		    ||	addi    r2, #-32
+	sll     r0, r2		    ||	ldi     r1, #0
+	jmp     r14
+	.fillinsn
+1:  ;   case shift <32
+	mv      r3, r1		    ||	sll     r0, r2
+	sll     r1, r2		    ||	neg     r2, r2
+	srl     r3, r2
+	or      r0, r3		    ||	jmp	r14
+
+	.align	4
+	.globl __lshrdi3
+__lshrdi3:
+	cmpz	r2		    ||	ldi	r3, #32
+	jc	r14		    ||	cmpu	r2, r3
+	bc      1f
+    ;   case 32 =< shift
+	mv      r1, r0		    ||	addi    r2, #-32
+	ldi	r0, #0		    ||	srl     r1, r2
+	jmp     r14
+	.fillinsn
+1:  ;   case shift <32
+	mv      r3, r0		    ||	srl     r1, r2
+	srl     r0, r2		    ||	neg     r2, r2
+	sll     r3, r2
+	or      r1, r3		    ||	jmp	r14
+
+#else /* LITTLE_ENDIAN */
+
+	.text
+	.align	4
+	.globl __ashrdi3
+__ashrdi3:
+	cmpz	r2		    ||	ldi	r3, #32
+	jc	r14		    ||	cmpu	r2, r3
+	bc      1f
+    ;   case 32 =< shift
+	mv      r0, r1		    ||	srai    r1, #31
+	addi    r2, #-32
+	sra     r0, r2
+	jmp     r14
+	.fillinsn
+1:  ;   case shift <32
+	mv      r3, r1		    ||	srl     r0, r2
+	sra     r1, r2		    ||	neg     r2, r2
+	sll     r3, r2
+	or      r0, r3		    ||	jmp	r14
+
+        .align  4
+        .globl __ashldi3
+        .globl __lshldi3
+__ashldi3:
+__lshldi3:
+	cmpz	r2		    ||	ldi	r3, #32
+	jc	r14		    ||	cmpu	r2, r3
+	bc      1f
+    ;   case 32 =< shift
+	mv      r1, r0		    ||	addi    r2, #-32
+	sll     r1, r2		    ||	ldi     r0, #0
+	jmp     r14
+	.fillinsn
+1:  ;   case shift <32
+	mv      r3, r0		    ||	sll     r1, r2
+	sll     r0, r2		    ||	neg     r2, r2
+	srl     r3, r2
+	or      r1, r3		    ||	jmp	r14
+
+	.align	4
+	.globl __lshrdi3
+__lshrdi3:
+	cmpz	r2		    ||	ldi	r3, #32
+	jc	r14		    ||	cmpu	r2, r3
+	bc      1f
+    ;   case 32 =< shift
+	mv      r0, r1		    ||	addi    r2, #-32
+	ldi	r1, #0		    ||	srl     r0, r2
+	jmp     r14
+	.fillinsn
+1:  ;   case shift <32
+	mv      r3, r1		    ||	srl     r0, r2
+	srl     r1, r2		    ||	neg     r2, r2
+	sll     r3, r2
+	or      r0, r3		    ||	jmp	r14
+
+#endif
+
+#else /* not CONFIG_ISA_DUAL_ISSUE */
+
+#ifndef __LITTLE_ENDIAN__
+
+	.text
+	.align	4
+	.globl __ashrdi3
+__ashrdi3:
+	beqz	r2, 2f
+	cmpui   r2, #32
+	bc      1f
+    ;   case 32 =< shift
+	mv      r1, r0
+	srai    r0, #31
+	addi    r2, #-32
+	sra     r1, r2
+	jmp     r14
+	.fillinsn
+1:  ;   case shift <32
+	mv      r3, r0
+	srl     r1, r2
+	sra     r0, r2
+	neg     r2, r2
+	sll     r3, r2
+	or      r1, r3
+	.fillinsn
+2:
+	jmp	r14
+
+        .align  4
+        .globl __ashldi3
+        .globl __lshldi3
+__ashldi3:
+__lshldi3:
+	beqz	r2, 2f
+	cmpui   r2, #32
+	bc      1f
+    ;   case 32 =< shift
+	mv      r0, r1
+	addi    r2, #-32
+	sll     r0, r2
+	ldi     r1, #0
+	jmp     r14
+	.fillinsn
+1:  ;   case shift <32
+	mv      r3, r1
+	sll     r0, r2
+	sll     r1, r2
+	neg     r2, r2
+	srl     r3, r2
+	or      r0, r3
+	.fillinsn
+2:
+	jmp	r14
+
+	.align	4
+	.globl __lshrdi3
+__lshrdi3:
+	beqz	r2, 2f
+	cmpui   r2, #32
+	bc      1f
+    ;   case 32 =< shift
+	mv      r1, r0
+	ldi	r0, #0
+	addi    r2, #-32
+	srl     r1, r2
+	jmp     r14
+	.fillinsn
+1:  ;   case shift <32
+	mv      r3, r0
+	srl     r1, r2
+	srl     r0, r2
+	neg     r2, r2
+	sll     r3, r2
+	or      r1, r3
+	.fillinsn
+2:
+	jmp	r14
+
+#else
+
+	.text
+	.align	4
+	.globl __ashrdi3
+__ashrdi3:
+	beqz	r2, 2f
+	cmpui   r2, #32
+	bc      1f
+    ;   case 32 =< shift
+	mv      r0, r1
+	srai    r1, #31
+	addi    r2, #-32
+	sra     r0, r2
+	jmp     r14
+	.fillinsn
+1:  ;   case shift <32
+	mv      r3, r1
+	srl     r0, r2
+	sra     r1, r2
+	neg     r2, r2
+	sll     r3, r2
+	or      r0, r3
+	.fillinsn
+2:
+	jmp	r14
+
+        .align  4
+        .globl __ashldi3
+        .globl __lshldi3
+__ashldi3:
+__lshldi3:
+	beqz	r2, 2f
+	cmpui   r2, #32
+	bc      1f
+    ;   case 32 =< shift
+	mv      r1, r0
+	addi    r2, #-32
+	sll     r1, r2
+	ldi     r0, #0
+	jmp     r14
+	.fillinsn
+1:  ;   case shift <32
+	mv      r3, r0
+	sll     r1, r2
+	sll     r0, r2
+	neg     r2, r2
+	srl     r3, r2
+	or      r1, r3
+	.fillinsn
+2:
+	jmp	r14
+
+	.align	4
+	.globl __lshrdi3
+__lshrdi3:
+	beqz	r2, 2f
+	cmpui   r2, #32
+	bc      1f
+    ;   case 32 =< shift
+	mv      r0, r1
+	ldi	r1, #0
+	addi    r2, #-32
+	srl     r0, r2
+	jmp     r14
+	.fillinsn
+1:  ;   case shift <32
+	mv      r3, r1
+	srl     r0, r2
+	srl     r1, r2
+	neg     r2, r2
+	sll     r3, r2
+	or      r0, r3
+	.fillinsn
+2:
+	jmp	r14
+
+#endif
+
+#endif /* not CONFIG_ISA_DUAL_ISSUE */
+
+	.end
+
diff --git a/arch/m32r/lib/checksum.S b/arch/m32r/lib/checksum.S
new file mode 100644
index 0000000..f6fc1bd
--- /dev/null
+++ b/arch/m32r/lib/checksum.S
@@ -0,0 +1,322 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		IP/TCP/UDP checksumming routines
+ *
+ * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
+ *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ *		Tom May, <ftom@netcom.com>
+ *              Pentium Pro/II routines:
+ *              Alexander Kjeldaas <astor@guardian.no>
+ *              Finn Arne Gangstad <finnag@guardian.no>
+ *		Lots of code moved from tcp.c and ip.c; see those files
+ *		for more names.
+ *
+ * Changes:     Ingo Molnar, converted csum_partial_copy() to 2.1 exception
+ *			     handling.
+ *		Andi Kleen,  add zeroing on error
+ *                   converted to pure assembler
+ *		Hirokazu Takata,Hiroyuki Kondo rewrite for the m32r architecture.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+/* $Id$ */
+
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+
+/*
+ * computes a partial checksum, e.g. for TCP/UDP fragments
+ */
+
+/*
+unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum)
+ */
+
+
+#ifdef CONFIG_ISA_DUAL_ISSUE
+
+	/*
+	 * Experiments with Ethernet and SLIP connections show that buff
+	 * is aligned on either a 2-byte or 4-byte boundary.  We get at
+	 * least a twofold speedup on 486 and Pentium if it is 4-byte aligned.
+	 * Fortunately, it is easy to convert 2-byte alignment to 4-byte
+	 * alignment for the unrolled loop.
+	 */
+
+	.text
+ENTRY(csum_partial)
+	; Function args
+	;  r0: unsigned char *buff
+	;  r1: int len
+	;  r2: unsigned int sum
+
+	push	r2		    ||	ldi	r2, #0
+	and3	r7, r0, #1		; Check alignment.
+	beqz	r7, 1f	 		; Jump if alignment is ok.
+	; 1-byte mis aligned
+	ldub	r4, @r0		    ||	addi	r0, #1
+	; clear c-bit || Alignment uses up bytes.
+	cmp	r0, r0		    ||	addi	r1, #-1
+	ldi	r3, #0		    ||	addx	r2, r4
+	addx	r2, r3
+	.fillinsn
+1:
+	and3	r4, r0, #2		; Check alignment.
+	beqz	r4, 2f	 		; Jump if alignment is ok.
+	; clear c-bit || Alignment uses up two bytes.
+	cmp	r0, r0		    ||	addi	r1, #-2
+	bgtz	r1, 1f			; Jump if we had at least two bytes.
+	bra	4f		    ||	addi	r1, #2
+	.fillinsn			; len(r1) was < 2.  Deal with it.
+1:
+	; 2-byte aligned
+	lduh	r4, @r0		    ||	ldi	r3, #0
+	addx	r2, r4		    ||	addi	r0, #2
+	addx	r2, r3
+	.fillinsn
+2:
+	; 4-byte aligned
+	cmp	r0, r0			; clear c-bit
+	srl3	r6, r1, #5
+	beqz	r6, 2f
+	.fillinsn
+
+1:	ld	r3, @r0+
+	ld	r4, @r0+					; +4
+	ld	r5, @r0+					; +8
+	ld	r3, @r0+	    ||	addx    r2, r3		; +12
+	ld	r4, @r0+	    ||	addx    r2, r4		; +16
+	ld	r5, @r0+	    ||	addx    r2, r5		; +20
+	ld	r3, @r0+	    ||	addx    r2, r3		; +24
+	ld	r4, @r0+	    ||	addx    r2, r4		; +28
+	addx	r2, r5		    ||	addi	r6, #-1
+	addx	r2, r3
+	addx	r2, r4
+	bnez	r6, 1b
+
+	addx	r2, r6			; r6=0
+	cmp	r0, r0			; This clears c-bit
+	.fillinsn
+2:	and3	r6, r1, #0x1c		; withdraw len
+	beqz	r6, 4f
+	srli	r6, #2
+	.fillinsn
+
+3:	ld	r4, @r0+	    ||	addi	r6, #-1
+	addx	r2, r4
+	bnez	r6, 3b
+
+	addx	r2, r6			; r6=0
+	cmp	r0, r0			; This clears c-bit
+	.fillinsn
+4:	and3	r1, r1, #3
+	beqz	r1, 7f			; if len == 0 goto end
+	and3	r6, r1, #2
+	beqz	r6, 5f			; if len < 2  goto 5f(1byte)
+	lduh	r4, @r0		    ||	addi	r0, #2
+	addi	r1, #-2		    ||	slli    r4, #16
+	addx	r2, r4
+	beqz	r1, 6f
+	.fillinsn
+5:	ldub	r4, @r0		    ||	ldi	r1, #0
+#ifndef __LITTLE_ENDIAN__
+	slli    r4, #8
+#endif
+	addx	r2, r4
+	.fillinsn
+6:	addx	r2, r1
+	.fillinsn
+7:
+	and3	r0, r2, #0xffff
+	srli	r2, #16
+	add	r0, r2
+	srl3	r2, r0, #16
+	beqz	r2, 1f
+	addi	r0, #1
+	and3	r0, r0, #0xffff
+	.fillinsn
+1:
+	beqz	r7, 1f			; swap the upper byte for the lower
+	and3	r2, r0, #0xff
+	srl3	r0, r0, #8
+	slli	r2, #8
+	or	r0, r2
+	.fillinsn
+1:
+	pop	r2		    ||	cmp	r0, r0
+	addx	r0, r2		    ||	ldi	r2, #0
+	addx	r0, r2
+	jmp	r14
+
+#else /* not CONFIG_ISA_DUAL_ISSUE */
+
+	/*
+	 * Experiments with Ethernet and SLIP connections show that buff
+	 * is aligned on either a 2-byte or 4-byte boundary.  We get at
+	 * least a twofold speedup on 486 and Pentium if it is 4-byte aligned.
+	 * Fortunately, it is easy to convert 2-byte alignment to 4-byte
+	 * alignment for the unrolled loop.
+	 */
+
+	.text
+ENTRY(csum_partial)
+	; Function args
+	;  r0: unsigned char *buff
+	;  r1: int len
+	;  r2: unsigned int sum
+
+	push	r2
+	ldi	r2, #0
+	and3	r7, r0, #1		; Check alignment.
+	beqz	r7, 1f	 		; Jump if alignment is ok.
+	; 1-byte mis aligned
+	ldub	r4, @r0
+	addi	r0, #1
+	addi	r1, #-1			; Alignment uses up bytes.
+	cmp	r0, r0			; clear c-bit
+	ldi	r3, #0
+	addx	r2, r4
+	addx	r2, r3
+	.fillinsn
+1:
+	and3	r4, r0, #2		; Check alignment.
+	beqz	r4, 2f	 		; Jump if alignment is ok.
+	addi	r1, #-2			; Alignment uses up two bytes.
+	cmp		r0, r0			; clear c-bit
+	bgtz	r1, 1f			; Jump if we had at least two bytes.
+	addi	r1, #2			; len(r1) was < 2.  Deal with it.
+	bra	4f
+	.fillinsn
+1:
+	; 2-byte aligned
+	lduh	r4, @r0
+	addi	r0, #2
+	ldi		r3, #0
+	addx	r2, r4
+	addx	r2, r3
+	.fillinsn
+2:
+	; 4-byte aligned
+	cmp	r0, r0			; clear c-bit
+	srl3	r6, r1, #5
+	beqz	r6, 2f
+	.fillinsn
+
+1:	ld	r3, @r0+
+	ld	r4, @r0+		; +4
+	ld	r5, @r0+		; +8
+	addx	r2, r3
+	addx	r2, r4
+	addx	r2, r5
+	ld	r3, @r0+		; +12
+	ld	r4, @r0+		; +16
+	ld	r5, @r0+		; +20
+	addx	r2, r3
+	addx	r2, r4
+	addx	r2, r5
+	ld	r3, @r0+		; +24
+	ld	r4, @r0+		; +28
+	addi	r6, #-1
+	addx	r2, r3
+	addx	r2, r4
+	bnez	r6, 1b
+	addx	r2, r6			; r6=0
+	cmp	r0, r0			; This clears c-bit
+	.fillinsn
+
+2:	and3	r6, r1, #0x1c		; withdraw len
+	beqz	r6, 4f
+	srli	r6, #2
+	.fillinsn
+
+3:	ld	r4, @r0+
+	addi	r6, #-1
+	addx	r2, r4
+	bnez	r6, 3b
+	addx	r2, r6			; r6=0
+	cmp	r0, r0			; This clears c-bit
+	.fillinsn
+
+4:	and3	r1, r1, #3
+	beqz	r1, 7f			; if len == 0 goto end
+	and3	r6, r1, #2
+	beqz	r6, 5f			; if len < 2  goto 5f(1byte)
+
+	lduh	r4, @r0
+	addi	r0, #2
+	addi	r1, #-2
+	slli    r4, #16
+	addx	r2, r4
+	beqz	r1, 6f
+	.fillinsn
+5:	ldub	r4, @r0
+#ifndef __LITTLE_ENDIAN__
+	slli    r4, #8
+#endif
+	addx	r2, r4
+	.fillinsn
+6:	ldi	r5, #0
+	addx	r2, r5
+	.fillinsn
+7:
+	and3	r0, r2, #0xffff
+	srli	r2, #16
+	add	r0, r2
+	srl3	r2, r0, #16
+	beqz	r2, 1f
+	addi	r0, #1
+	and3	r0, r0, #0xffff
+	.fillinsn
+1:
+	beqz	r7, 1f
+	mv	r2, r0
+	srl3	r0, r2, #8
+	and3	r2, r2, #0xff
+	slli	r2, #8
+	or	r0, r2
+	.fillinsn
+1:
+	pop	r2
+	cmp	r0, r0
+	addx	r0, r2
+	ldi	r2, #0
+	addx	r0, r2
+	jmp	r14
+
+#endif /* not CONFIG_ISA_DUAL_ISSUE */
+
+/*
+unsigned int csum_partial_copy_generic (const char *src, char *dst,
+				  int len, int sum, int *src_err_ptr, int *dst_err_ptr)
+ */
+
+/*
+ * Copy from ds while checksumming, otherwise like csum_partial
+ *
+ * The macros SRC and DST specify the type of access for the instruction.
+ * thus we can call a custom exception handler for all access types.
+ *
+ * FIXME: could someone double-check whether I haven't mixed up some SRC and
+ *	  DST definitions? It's damn hard to trigger all cases.  I hope I got
+ *	  them all but there's no guarantee.
+ */
+
+ENTRY(csum_partial_copy_generic)
+	nop
+	nop
+	nop
+	nop
+	jmp r14
+	nop
+	nop
+	nop
+
diff --git a/arch/m32r/lib/csum_partial_copy.c b/arch/m32r/lib/csum_partial_copy.c
new file mode 100644
index 0000000..c871b46
--- /dev/null
+++ b/arch/m32r/lib/csum_partial_copy.c
@@ -0,0 +1,60 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		M32R specific IP/TCP/UDP checksumming routines
+ *		(Some code taken from MIPS architecture)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995  Waldorf Electronics GmbH
+ * Copyright (C) 1998, 1999  Ralf Baechle
+ * Copyright (C) 2001-2005  Hiroyuki Kondo, Hirokazu Takata
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include <net/checksum.h>
+#include <asm/byteorder.h>
+#include <asm/string.h>
+#include <asm/uaccess.h>
+
+/*
+ * Copy while checksumming, otherwise like csum_partial
+ */
+unsigned int
+csum_partial_copy_nocheck (const unsigned char *src, unsigned char *dst,
+                           int len, unsigned int sum)
+{
+	sum = csum_partial(src, len, sum);
+	memcpy(dst, src, len);
+
+	return sum;
+}
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+
+/*
+ * Copy from userspace and compute checksum.  If we catch an exception
+ * then zero the rest of the buffer.
+ */
+unsigned int
+csum_partial_copy_from_user (const unsigned char __user *src,
+			     unsigned char *dst,
+			     int len, unsigned int sum, int *err_ptr)
+{
+	int missing;
+
+	missing = copy_from_user(dst, src, len);
+	if (missing) {
+		memset(dst + len - missing, 0, missing);
+		*err_ptr = -EFAULT;
+	}
+
+	return csum_partial(dst, len-missing, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy_from_user);
diff --git a/arch/m32r/lib/delay.c b/arch/m32r/lib/delay.c
new file mode 100644
index 0000000..fb29632
--- /dev/null
+++ b/arch/m32r/lib/delay.c
@@ -0,0 +1,126 @@
+/*
+ * linux/arch/m32r/lib/delay.c
+ *
+ * Copyright (c) 2002  Hitoshi Yamamoto, Hirokazu Takata
+ * Copyright (c) 2004  Hirokazu Takata
+ */
+
+/* $Id$ */
+
+#include <linux/config.h>
+#include <linux/param.h>
+#ifdef CONFIG_SMP
+#include <linux/sched.h>
+#include <asm/current.h>
+#include <asm/smp.h>
+#endif  /* CONFIG_SMP */
+#include <asm/processor.h>
+
+void __delay(unsigned long loops)
+{
+#ifdef CONFIG_ISA_DUAL_ISSUE
+	__asm__ __volatile__ (
+		"beqz	%0, 2f			\n\t"
+		"addi	%0, #-1			\n\t"
+
+		" .fillinsn			\n\t"
+		"1:				\n\t"
+		"cmpz	%0  ||  addi  %0, #-1	\n\t"
+		"bc	2f  ||  cmpz  %0	\n\t"
+		"bc	2f  ||  addi  %0, #-1	\n\t"
+		"cmpz	%0  ||  addi  %0, #-1	\n\t"
+		"bc	2f  ||  cmpz  %0	\n\t"
+		"bnc	1b  ||  addi  %0, #-1	\n\t"
+		" .fillinsn			\n\t"
+		"2:				\n\t"
+		: "+r" (loops)
+		: "r" (0)
+		: "cbit"
+	);
+#else
+	__asm__ __volatile__ (
+		"beqz	%0, 2f			\n\t"
+		" .fillinsn			\n\t"
+		"1:				\n\t"
+		"addi	%0, #-1			\n\t"
+		"blez	%0, 2f			\n\t"
+		"addi	%0, #-1			\n\t"
+		"blez	%0, 2f			\n\t"
+		"addi	%0, #-1			\n\t"
+		"blez	%0, 2f			\n\t"
+		"addi	%0, #-1			\n\t"
+		"bgtz	%0, 1b			\n\t"
+		" .fillinsn			\n\t"
+		"2:				\n\t"
+		: "+r" (loops)
+		: "r" (0)
+	);
+#endif
+}
+
+void __const_udelay(unsigned long xloops)
+{
+#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
+	/*
+	 * loops [1] = (xloops >> 32) [sec] * loops_per_jiffy [1/jiffy]
+	 *            * HZ [jiffy/sec]
+	 *          = (xloops >> 32) [sec] * (loops_per_jiffy * HZ) [1/sec]
+	 *          = (((xloops * loops_per_jiffy) >> 32) * HZ) [1]
+	 *
+	 * NOTE:
+	 *   - '[]' depicts variable's dimension in the above equation.
+	 *   - "rac" instruction rounds the accumulator in word size.
+	 */
+	__asm__ __volatile__ (
+		"srli	%0, #1				\n\t"
+		"mulwhi	%0, %1	; a0			\n\t"
+		"mulwu1	%0, %1	; a1			\n\t"
+		"sadd		; a0 += (a1 >> 16)	\n\t"
+		"rac	a0, a0, #1			\n\t"
+		"mvfacmi %0, a0				\n\t"
+		: "+r" (xloops)
+		: "r" (current_cpu_data.loops_per_jiffy)
+		: "a0", "a1"
+	);
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+	/*
+	 * u64 ull;
+	 * ull = (u64)xloops * (u64)current_cpu_data.loops_per_jiffy;
+	 * xloops = (ull >> 32);
+	 */
+	__asm__ __volatile__ (
+		"and3	r4, %0, #0xffff		\n\t"
+		"and3	r5, %1, #0xffff		\n\t"
+		"mul	r4, r5			\n\t"
+		"srl3	r6, %0, #16		\n\t"
+		"srli	r4, #16			\n\t"
+		"mul	r5, r6			\n\t"
+		"add	r4, r5			\n\t"
+		"and3	r5, %0, #0xffff		\n\t"
+		"srl3	r6, %1, #16		\n\t"
+		"mul	r5, r6			\n\t"
+		"add	r4, r5			\n\t"
+		"srl3	r5, %0, #16		\n\t"
+		"srli	r4, #16			\n\t"
+		"mul	r5, r6			\n\t"
+		"add	r4, r5			\n\t"
+		"mv	%0, r4			\n\t"
+		: "+r" (xloops)
+		: "r" (current_cpu_data.loops_per_jiffy)
+		: "r4", "r5", "r6"
+	);
+#else
+#error unknown isa configuration
+#endif
+	__delay(xloops * HZ);
+}
+
+void __udelay(unsigned long usecs)
+{
+	__const_udelay(usecs * 0x000010c7);  /* 2**32 / 1000000 (rounded up) */
+}
+
+void __ndelay(unsigned long nsecs)
+{
+	__const_udelay(nsecs * 0x00005);  /* 2**32 / 1000000000 (rounded up) */
+}
diff --git a/arch/m32r/lib/getuser.S b/arch/m32r/lib/getuser.S
new file mode 100644
index 0000000..58a0db0
--- /dev/null
+++ b/arch/m32r/lib/getuser.S
@@ -0,0 +1,88 @@
+/*
+ * __get_user functions.
+ *
+ * (C) Copyright 2001 Hirokazu Takata
+ *
+ * These functions have a non-standard call interface
+ * to make them more efficient, especially as they
+ * return an error value in addition to the "real"
+ * return value.
+ */
+
+#include <linux/config.h>
+
+/*
+ * __get_user_X
+ *
+ * Inputs:	r0 contains the address
+ *
+ * Outputs:	r0 is error code (0 or -EFAULT)
+ *		r1 contains zero-extended value
+ *
+ * These functions should not modify any other registers,
+ * as they get called from within inline assembly.
+ */
+
+#ifdef CONFIG_ISA_DUAL_ISSUE
+
+	.text
+	.balign 4
+	.globl __get_user_1
+__get_user_1:
+1:	ldub	r1, @r0		    ||	ldi	r0, #0
+	jmp	r14
+
+	.balign 4
+	.globl __get_user_2
+__get_user_2:
+2:	lduh	r1, @r0		    ||	ldi	r0, #0
+	jmp	r14
+
+	.balign 4
+	.globl __get_user_4
+__get_user_4:
+3:	ld	r1, @r0		    ||	ldi	r0, #0
+	jmp	r14
+
+bad_get_user:
+	ldi	r1, #0		    ||	ldi	r0, #-14
+	jmp	r14
+
+#else /* not CONFIG_ISA_DUAL_ISSUE */
+
+	.text
+	.balign 4
+	.globl __get_user_1
+__get_user_1:
+1:	ldub	r1, @r0
+	ldi	r0, #0
+	jmp	r14
+
+	.balign 4
+	.globl __get_user_2
+__get_user_2:
+2:	lduh	r1, @r0
+	ldi	r0, #0
+	jmp	r14
+
+	.balign 4
+	.globl __get_user_4
+__get_user_4:
+3:	ld	r1, @r0
+	ldi	r0, #0
+	jmp	r14
+
+bad_get_user:
+	ldi	r1, #0
+	ldi	r0, #-14
+	jmp	r14
+
+#endif /* not CONFIG_ISA_DUAL_ISSUE */
+
+.section __ex_table,"a"
+	.long 1b,bad_get_user
+	.long 2b,bad_get_user
+	.long 3b,bad_get_user
+.previous
+
+	.end
diff --git a/arch/m32r/lib/memcpy.S b/arch/m32r/lib/memcpy.S
new file mode 100644
index 0000000..800898a
--- /dev/null
+++ b/arch/m32r/lib/memcpy.S
@@ -0,0 +1,95 @@
+/*
+ *  linux/arch/m32r/lib/memcpy.S
+ *
+ *  Copyright (C) 2001  Hiroyuki Kondo, and Hirokazu Takata
+ *  Copyright (C) 2004  Hirokazu Takata
+ *
+ *  void *memcopy(void *dst, const void *src, int n);
+ *
+ *        dst: r0
+ *        src: r1
+ *        n  : r2
+ */
+/* $Id$ */
+
+
+	.text
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#ifdef CONFIG_ISA_DUAL_ISSUE
+
+	.text
+ENTRY(memcpy)
+memcopy:
+	mv	r4, r0		    ||	mv	r7, r0
+	or	r7, r1		    ||	cmpz	r2
+	jc	r14		    ||	cmpeq	r0, r1	; return if r2=0
+	jc	r14					; return if r0=r1
+
+	and3	r7, r7, #3
+	bnez	r7, byte_copy
+	srl3	r3, r2, #2
+	and3	r2, r2, #3
+	beqz	r3, byte_copy
+	addi	r4, #-4
+word_copy:
+	ld	r7, @r1+	    ||	addi	r3, #-1
+	st	r7, @+r4	    ||	cmpz	r2
+	bnez	r3, word_copy
+	addi	r4, #4		    ||	jc	r14	; return if r2=0
+#if defined(CONFIG_ISA_M32R2)
+byte_copy:
+	ldb	r7, @r1		    ||	addi	r1, #1
+	addi	r2, #-1		    ||	stb	r7, @r4+
+	bnez	r2, byte_copy
+#elif defined(CONFIG_ISA_M32R)
+byte_copy:
+	ldb	r7, @r1		    ||	addi	r1, #1
+	addi	r2, #-1		    ||	stb	r7, @r4
+	addi	r4, #1
+	bnez	r2, byte_copy
+#else
+#error unknown isa configuration
+#endif
+end_memcopy:
+	jmp	r14
+
+#else /* not CONFIG_ISA_DUAL_ISSUE */
+
+	.text
+ENTRY(memcpy)
+memcopy:
+	mv	r4, r0
+	mv	r7, r0
+	or	r7, r1
+	beq	r0, r1, end_memcopy
+	beqz	r2, end_memcopy
+
+	and3	r7, r7, #3
+	bnez	r7, byte_copy
+	srl3	r3, r2, #2
+	and3	r2, r2, #3
+	beqz	r3, byte_copy
+	addi	r4, #-4
+word_copy:
+	ld	r7, @r1+
+	addi	r3, #-1
+	st	r7, @+r4
+	bnez	r3, word_copy
+	beqz	r2, end_memcopy
+	addi	r4, #4
+byte_copy:
+	ldb	r7, @r1
+	addi	r1, #1
+	addi	r2, #-1
+	stb	r7, @r4
+	addi	r4, #1
+	bnez	r2, byte_copy
+end_memcopy:
+	jmp	r14
+
+#endif /* not CONFIG_ISA_DUAL_ISSUE */
+
+	.end
diff --git a/arch/m32r/lib/memset.S b/arch/m32r/lib/memset.S
new file mode 100644
index 0000000..6e26df1
--- /dev/null
+++ b/arch/m32r/lib/memset.S
@@ -0,0 +1,181 @@
+/*
+ *  linux/arch/m32r/lib/memset.S
+ *
+ *  Copyright (C) 2001,2002  Hiroyuki Kondo, and Hirokazu Takata
+ *  Copyright (C) 2004  Hirokazu Takata
+ *
+ *  void *memset(void *dst, int val, int len);
+ *
+ *        dst: r0
+ *        val: r1
+ *        len: r2
+ *        ret: r0
+ *
+ */
+/* $Id$ */
+
+#include <linux/config.h>
+
+	.text
+	.global	memset
+
+#ifdef CONFIG_ISA_DUAL_ISSUE
+
+	.align 4
+memset:
+	mv      r4, r0		    ||	cmpz	r2
+	jc	r14
+	cmpui	r2, #16
+	bnc	qword_align_check
+	cmpui	r2, #4
+	bc	byte_set
+word_align_check:			/* len >= 4 */
+	and3	r3, r4, #3
+	beqz	r3, word_set
+	addi	r3, #-4
+	neg	r3, r3			/* r3 = -(r3 - 4) */
+align_word:
+	stb	r1, @r4		    ||	addi	r4, #1
+	addi	r2, #-1		    ||	addi	r3, #-1
+	bnez	r3, align_word
+	cmpui	r2, #4
+	bc	byte_set
+word_set:
+	and3	r1, r1, #0x00ff		/* r1: abababab <-- ??????ab */
+	sll3	r3, r1, #8
+	or	r1, r3		    ||	addi	r4, #-4
+	sll3	r3, r1, #16
+	or	r1, r3		    ||	addi	r2, #-4
+word_set_loop:
+	st	r1, @+r4	    ||	addi	r2, #-4
+	bgtz	r2, word_set_loop
+	bnez	r2, byte_set_wrap
+	st	r1, @+r4
+	jmp	r14
+
+qword_align_check:			/* len >= 16 */
+	and3	r3, r4, #15
+	bnez	r3, word_align_check
+qword_set:
+	and3	r1, r1, #0x00ff		/* r1: abababab <-- ??????ab */
+	sll3	r3, r1, #8
+	or	r1, r3		    ||	addi	r4, #-4
+	sll3	r3, r1, #16
+	or	r1, r3		    ||	ldi	r5, #16
+qword_set_loop:
+	ld	r3, @(4,r4)		/* cache line allocate */
+	st	r1, @+r4	    ||	addi	r2, #-16
+	st	r1, @+r4	    ||	cmpu	r2, r5
+	st	r1, @+r4
+	st	r1, @+r4
+	bnc	qword_set_loop	    ||  cmpz	r2
+	jc	r14
+set_remainder:
+	cmpui	r2, #4
+	bc	byte_set_wrap1
+	addi	r2, #-4
+	bra	word_set_loop
+
+byte_set_wrap:
+	addi	r2, #4
+	cmpz	r2
+	jc	r14
+byte_set_wrap1:
+	addi	r4, #4
+#if defined(CONFIG_ISA_M32R2)
+byte_set:
+	addi	r2, #-1		    ||	stb	r1, @r4+
+	bnez	r2, byte_set
+#elif defined(CONFIG_ISA_M32R)
+byte_set:
+	addi	r2, #-1		    ||	stb	r1, @r4
+	addi	r4, #1
+	bnez	r2, byte_set
+#else
+#error unknown isa configuration
+#endif
+end_memset:
+	jmp	r14
+
+#else /* not CONFIG_ISA_DUAL_ISSUE */
+
+	.align 4
+memset:
+	mv      r4, r0
+	beqz	r2, end_memset
+	cmpui	r2, #16
+	bnc	qword_align_check
+	cmpui	r2, #4
+	bc	byte_set
+word_align_check:			/* len >= 4 */
+	and3	r3, r4, #3
+	beqz	r3, word_set
+	addi	r3, #-4
+	neg	r3, r3			/* r3 = -(r3 - 4) */
+align_word:
+	stb	r1, @r4
+	addi	r4, #1
+	addi	r2, #-1
+	addi	r3, #-1
+	bnez	r3, align_word
+	cmpui	r2, #4
+	bc	byte_set
+word_set:
+	and3	r1, r1, #0x00ff		/* r1: abababab <-- ??????ab */
+	sll3	r3, r1, #8
+	or	r1, r3
+	sll3	r3, r1, #16
+	or	r1, r3
+	addi	r2, #-4
+	addi	r4, #-4
+word_set_loop:
+	st	r1, @+r4
+	addi	r2, #-4
+	bgtz    r2, word_set_loop
+	bnez	r2, byte_set_wrap
+	st	r1, @+r4
+	jmp	r14
+
+qword_align_check:			/* len >= 16 */
+	and3	r3, r4, #15
+	bnez	r3, word_align_check
+qword_set:
+	and3	r1, r1, #0x00ff		/* r1: abababab <-- ??????ab */
+	sll3	r3, r1, #8
+	or	r1, r3
+	sll3	r3, r1, #16
+	or	r1, r3
+	addi	r4, #-4
+qword_set_loop:
+	ld	r3, @(4,r4)		/* cache line allocate */
+	addi	r2, #-16
+	st	r1, @+r4
+	st	r1, @+r4
+	cmpui	r2, #16
+	st	r1, @+r4
+	st	r1, @+r4
+	bnc	qword_set_loop
+	bnez	r2, set_remainder
+	jmp	r14
+set_remainder:
+	cmpui	r2, #4
+	bc	byte_set_wrap1
+	addi	r2, #-4
+	bra	word_set_loop
+
+byte_set_wrap:
+	addi	r2, #4
+	beqz	r2, end_memset
+byte_set_wrap1:
+	addi	r4, #4
+byte_set:
+	addi	r2, #-1
+	stb	r1, @r4
+	addi	r4, #1
+	bnez	r2, byte_set
+end_memset:
+	jmp	r14
+
+#endif /* not CONFIG_ISA_DUAL_ISSUE */
+
+	.end
diff --git a/arch/m32r/lib/putuser.S b/arch/m32r/lib/putuser.S
new file mode 100644
index 0000000..218154c
--- /dev/null
+++ b/arch/m32r/lib/putuser.S
@@ -0,0 +1,84 @@
+/*
+ * __put_user functions.
+ *
+ * (C) Copyright 1998 Linus Torvalds
+ * (C) Copyright 2001 Hirokazu Takata
+ *
+ * These functions have a non-standard call interface
+ * to make them more efficient.
+ */
+
+#include <linux/config.h>
+
+/*
+ * __put_user_X
+ *
+ * Inputs:	r0 contains the address
+ *		r1 contains the value
+ *
+ * Outputs:	r0 is error code (0 or -EFAULT)
+ *		r1 is corrupted (will contain "current_task").
+ *
+ * These functions should not modify any other registers,
+ * as they get called from within inline assembly.
+ */
+
+#ifdef CONFIG_ISA_DUAL_ISSUE
+
+	.text
+	.balign 4
+	.globl __put_user_1
+__put_user_1:
+1:	stb	r1, @r0		    ||	ldi	r0, #0
+	jmp	r14
+
+	.balign 4
+	.globl __put_user_2
+__put_user_2:
+2:	sth	r1, @r0		    ||	ldi	r0, #0
+	jmp	r14
+
+	.balign 4
+	.globl __put_user_4
+__put_user_4:
+3:	st	r1, @r0		    ||	ldi	r0, #0
+	jmp	r14
+
+bad_put_user:
+	ldi	r0, #-14	    ||	jmp	r14
+
+#else /* not CONFIG_ISA_DUAL_ISSUE */
+
+	.text
+	.balign 4
+	.globl __put_user_1
+__put_user_1:
+1:	stb	r1, @r0
+	ldi	r0, #0
+	jmp	r14
+
+	.balign 4
+	.globl __put_user_2
+__put_user_2:
+2:	sth	r1, @r0
+	ldi	r0, #0
+	jmp	r14
+
+	.balign 4
+	.globl __put_user_4
+__put_user_4:
+3:	st	r1, @r0
+	ldi	r0, #0
+	jmp	r14
+
+bad_put_user:
+	ldi	r0, #-14
+	jmp	r14
+
+#endif /* not CONFIG_ISA_DUAL_ISSUE */
+
+.section __ex_table,"a"
+	.long 1b,bad_put_user
+	.long 2b,bad_put_user
+	.long 3b,bad_put_user
+.previous
diff --git a/arch/m32r/lib/strlen.S b/arch/m32r/lib/strlen.S
new file mode 100644
index 0000000..8d23cfb
--- /dev/null
+++ b/arch/m32r/lib/strlen.S
@@ -0,0 +1,120 @@
+/*
+ *  linux/arch/m32r/strlen.S --  strlen code.
+ *
+ *  Copyright (C) 2001  Hirokazu Takata
+ *
+ *  size_t strlen(const char *s);
+ *
+ */
+/* $Id$ */
+
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#ifdef CONFIG_ISA_DUAL_ISSUE
+
+	.text
+ENTRY(strlen)
+	mv	r6, r0		    ||	ldi	r2, #0
+	and3	r0, r0, #3
+	bnez	r0, strlen_byte
+;
+strlen_word:
+	ld	r0, @r6+
+;
+	seth	r5, #high(0x01010101)
+	or3	r5, r5, #low(0x01010101)
+	sll3	r7, r5, #7
+strlen_word_loop:
+	ld	r1, @r6+	    ||	not	r4, r0
+	sub	r0, r5		    ||	and	r4, r7
+	and	r4, r0
+	bnez	r4, strlen_last_bytes
+	ld	r0, @r6+	    ||	not	r4, r1
+	sub	r1, r5		    ||	and	r4, r7
+	and	r4, r1		    ||	addi	r2, #4
+	bnez	r4, strlen_last_bytes
+	addi	r2, #4		    ||	bra.s	strlen_word_loop
+
+	; NOTE: If a null char. exists, return 0.
+	; if ((x - 0x01010101) & ~x & 0x80808080)
+	;     return 0;
+;
+strlen_byte:
+	ldb	r1, @r6		    ||	addi	r6, #1
+	beqz	r1, strlen_exit
+	addi	r2, #1		    ||	bra.s	strlen_byte
+;
+strlen_last_bytes:
+	ldi	r0, #4		    ||	addi	r6, #-8
+;
+strlen_byte_loop:
+	ldb	r1, @r6		    ||	addi	r6, #1
+	addi	r0, #-1		    ||  cmpz	r1
+	bc.s	strlen_exit	    ||  cmpz	r0
+	addi	r2, #1		    ||	bnc.s	strlen_byte_loop
+;
+strlen_exit:
+	mv	r0, r2		    ||	jmp	r14
+
+#else /* not CONFIG_ISA_DUAL_ISSUE */
+
+	.text
+ENTRY(strlen)
+	mv	r6, r0
+	ldi	r2, #0
+	and3	r0, r0, #3
+	bnez	r0, strlen_byte
+;
+strlen_word:
+	ld	r0, @r6+
+;
+	seth	r5, #high(0x01010101)
+	or3	r5, r5, #low(0x01010101)
+	sll3	r7, r5, #7
+strlen_word_loop:
+	ld	r1, @r6+
+	not	r4, r0		; NOTE: If a null char. exists, return 0.
+	sub	r0, r5		; if ((x - 0x01010101) & ~x & 0x80808080)
+	and	r4, r7		;     return 0;
+	and	r4, r0
+	bnez	r4, strlen_last_bytes
+	addi	r2, #4
+;
+	ld	r0, @r6+
+	not	r4, r1		; NOTE: If a null char. exists, return 0.
+	sub	r1, r5		; if ((x - 0x01010101) & ~x & 0x80808080)
+	and	r4, r7		;     return 0;
+	and	r4, r1
+	bnez	r4, strlen_last_bytes
+	addi	r2, #4
+	bra	strlen_word_loop
+;
+strlen_byte:
+	ldb	r1, @r6
+	addi	r6, #1
+	beqz	r1, strlen_exit
+	addi	r2, #1
+	bra	strlen_byte
+;
+strlen_last_bytes:
+	ldi	r0, #4
+	addi	r6, #-8
+;
+strlen_byte_loop:
+	ldb	r1, @r6
+	addi	r6, #1
+	addi	r0, #-1
+	beqz	r1, strlen_exit
+	addi	r2, #1
+	bnez	r0, strlen_byte_loop
+;
+strlen_exit:
+	mv	r0, r2
+	jmp	r14
+
+#endif /* not CONFIG_ISA_DUAL_ISSUE */
+
+	.end
diff --git a/arch/m32r/lib/usercopy.c b/arch/m32r/lib/usercopy.c
new file mode 100644
index 0000000..6c6855f
--- /dev/null
+++ b/arch/m32r/lib/usercopy.c
@@ -0,0 +1,391 @@
+/*
+ * User address space access functions.
+ * The non inlined parts of asm-m32r/uaccess.h are here.
+ *
+ * Copyright 1997 Andi Kleen <ak@muc.de>
+ * Copyright 1997 Linus Torvalds
+ * Copyright 2001, 2002, 2004 Hirokazu Takata
+ */
+#include <linux/config.h>
+#include <linux/prefetch.h>
+#include <linux/string.h>
+#include <linux/thread_info.h>
+#include <asm/uaccess.h>
+
+unsigned long
+__generic_copy_to_user(void *to, const void *from, unsigned long n)
+{
+	prefetch(from);
+	if (access_ok(VERIFY_WRITE, to, n))
+		__copy_user(to,from,n);
+	return n;
+}
+
+unsigned long
+__generic_copy_from_user(void *to, const void *from, unsigned long n)
+{
+	prefetchw(to);
+	if (access_ok(VERIFY_READ, from, n))
+		__copy_user_zeroing(to,from,n);
+	else
+		memset(to, 0, n);
+	return n;
+}
+
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+#ifdef CONFIG_ISA_DUAL_ISSUE
+
+#define __do_strncpy_from_user(dst,src,count,res)			\
+do {									\
+	int __d0, __d1, __d2;						\
+	__asm__ __volatile__(						\
+		"	beqz	%1, 2f\n"				\
+		"	.fillinsn\n"					\
+		"0:	ldb	r14, @%3    ||	addi	%3, #1\n"	\
+		"	stb	r14, @%4    ||	addi	%4, #1\n"	\
+		"	beqz	r14, 1f\n"				\
+		"	addi	%1, #-1\n"				\
+		"	bnez	%1, 0b\n"				\
+		"	.fillinsn\n"					\
+		"1:	sub	%0, %1\n"				\
+		"	.fillinsn\n"					\
+		"2:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"3:	seth	r14, #high(2b)\n"			\
+		"	or3	r14, r14, #low(2b)\n"			\
+		"	jmp	r14	    ||	ldi	%0, #%5\n"	\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 0b,3b\n"					\
+		".previous"						\
+		: "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1),	\
+		  "=&r" (__d2)						\
+		: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), 	\
+		  "4"(dst)						\
+		: "r14", "cbit", "memory");				\
+} while (0)
+
+#else /* not CONFIG_ISA_DUAL_ISSUE */
+
+#define __do_strncpy_from_user(dst,src,count,res)			\
+do {									\
+	int __d0, __d1, __d2;						\
+	__asm__ __volatile__(						\
+		"	beqz	%1, 2f\n"				\
+		"	.fillinsn\n"					\
+		"0:	ldb	r14, @%3\n"				\
+		"	stb	r14, @%4\n"				\
+		"	addi	%3, #1\n"				\
+		"	addi	%4, #1\n"				\
+		"	beqz	r14, 1f\n"				\
+		"	addi	%1, #-1\n"				\
+		"	bnez	%1, 0b\n"				\
+		"	.fillinsn\n"					\
+		"1:	sub	%0, %1\n"				\
+		"	.fillinsn\n"					\
+		"2:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"3:	ldi	%0, #%5\n"				\
+		"	seth	r14, #high(2b)\n"			\
+		"	or3	r14, r14, #low(2b)\n"			\
+		"	jmp	r14\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 0b,3b\n"					\
+		".previous"						\
+		: "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1),	\
+		  "=&r" (__d2)						\
+		: "i"(-EFAULT), "0"(count), "1"(count), "3"(src),	\
+		  "4"(dst)						\
+		: "r14", "cbit", "memory");				\
+} while (0)
+
+#endif /* CONFIG_ISA_DUAL_ISSUE */
+
+long
+__strncpy_from_user(char *dst, const char *src, long count)
+{
+	long res;
+	__do_strncpy_from_user(dst, src, count, res);
+	return res;
+}
+
+long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+	long res = -EFAULT;
+	if (access_ok(VERIFY_READ, src, 1))
+		__do_strncpy_from_user(dst, src, count, res);
+	return res;
+}
+
+
+/*
+ * Zero Userspace
+ */
+
+#ifdef CONFIG_ISA_DUAL_ISSUE
+
+#define __do_clear_user(addr,size)					\
+do {									\
+	int __dst, __c;							\
+  	__asm__ __volatile__(						\
+		"	beqz	%1, 9f\n"				\
+		"	and3	r14, %0, #3\n"				\
+		"	bnez	r14, 2f\n"				\
+		"	and3	r14, %1, #3\n"				\
+		"	bnez	r14, 2f\n"				\
+		"	and3	%1, %1, #3\n"				\
+		"	beqz	%2, 2f\n"				\
+		"	addi	%0, #-4\n"				\
+		"	.fillinsn\n"					\
+		"0:	; word clear \n"				\
+		"	st	%6, @+%0    ||	addi	%2, #-1\n"	\
+		"	bnez	%2, 0b\n"				\
+		"	beqz	%1, 9f\n"				\
+		"	.fillinsn\n"					\
+		"2:	; byte clear \n"				\
+		"	stb	%6, @%0	    ||	addi	%1, #-1\n"	\
+		"	addi	%0, #1\n"				\
+		"	bnez	%1, 2b\n"				\
+		"	.fillinsn\n"					\
+		"9:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"4:	slli	%2, #2\n"				\
+		"	seth	r14, #high(9b)\n"			\
+		"	or3	r14, r14, #low(9b)\n"			\
+		"	jmp	r14	    ||	add	%1, %2\n"	\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 0b,4b\n"					\
+		"	.long 2b,9b\n"					\
+		".previous\n"						\
+		: "=&r"(__dst), "=&r"(size), "=&r"(__c)			\
+		: "0"(addr), "1"(size), "2"(size / 4), "r"(0)		\
+		: "r14", "cbit", "memory");				\
+} while (0)
+
+#else /* not CONFIG_ISA_DUAL_ISSUE */
+
+#define __do_clear_user(addr,size)					\
+do {									\
+	int __dst, __c;							\
+  	__asm__ __volatile__(						\
+		"	beqz	%1, 9f\n"				\
+		"	and3	r14, %0, #3\n"				\
+		"	bnez	r14, 2f\n"				\
+		"	and3	r14, %1, #3\n"				\
+		"	bnez	r14, 2f\n"				\
+		"	and3	%1, %1, #3\n"				\
+		"	beqz	%2, 2f\n"				\
+		"	addi	%0, #-4\n"				\
+		"	.fillinsn\n"					\
+		"0:	st	%6, @+%0	; word clear \n"	\
+		"	addi	%2, #-1\n"				\
+		"	bnez	%2, 0b\n"				\
+		"	beqz	%1, 9f\n"				\
+		"	.fillinsn\n"					\
+		"2:	stb	%6, @%0		; byte clear \n"	\
+		"	addi	%1, #-1\n"				\
+		"	addi	%0, #1\n"				\
+		"	bnez	%1, 2b\n"				\
+		"	.fillinsn\n"					\
+		"9:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"4:	slli	%2, #2\n"				\
+		"	add	%1, %2\n"				\
+		"	seth	r14, #high(9b)\n"			\
+		"	or3	r14, r14, #low(9b)\n"			\
+		"	jmp	r14\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 0b,4b\n"					\
+		"	.long 2b,9b\n"					\
+		".previous\n"						\
+		: "=&r"(__dst), "=&r"(size), "=&r"(__c)			\
+		: "0"(addr), "1"(size), "2"(size / 4), "r"(0)		\
+		: "r14", "cbit", "memory");				\
+} while (0)
+
+#endif /* not CONFIG_ISA_DUAL_ISSUE */
+
+unsigned long
+clear_user(void *to, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		__do_clear_user(to, n);
+	return n;
+}
+
+unsigned long
+__clear_user(void *to, unsigned long n)
+{
+	__do_clear_user(to, n);
+	return n;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+
+#ifdef CONFIG_ISA_DUAL_ISSUE
+
+long strnlen_user(const char *s, long n)
+{
+	unsigned long mask = -__addr_ok(s);
+	unsigned long res;
+
+	__asm__ __volatile__(
+		"	and	%0, %5	    ||	mv	r1, %1\n"
+		"	beqz	%0, strnlen_exit\n"
+		"	and3	r0, %1, #3\n"
+		"	bnez	r0, strnlen_byte_loop\n"
+		"	cmpui	%0, #4\n"
+		"	bc	strnlen_byte_loop\n"
+		"strnlen_word_loop:\n"
+		"0:	ld	r0, @%1+\n"
+		"	pcmpbz	r0\n"
+		"	bc	strnlen_last_bytes_fixup\n"
+		"	addi	%0, #-4\n"
+		"	beqz	%0, strnlen_exit\n"
+		"	bgtz	%0, strnlen_word_loop\n"
+		"strnlen_last_bytes:\n"
+		"	mv	%0, %4\n"
+		"strnlen_last_bytes_fixup:\n"
+		"	addi	%1, #-4\n"
+		"strnlen_byte_loop:\n"
+		"1:	ldb	r0, @%1	    ||	addi	%0, #-1\n"
+		"	beqz	r0, strnlen_exit\n"
+		"	addi	%1, #1\n"
+		"	bnez	%0, strnlen_byte_loop\n"
+		"strnlen_exit:\n"
+		"	sub	%1, r1\n"
+		"	add3	%0, %1, #1\n"
+		"	.fillinsn\n"
+		"9:\n"
+		".section .fixup,\"ax\"\n"
+		"	.balign 4\n"
+		"4:	addi	%1, #-4\n"
+		"	.fillinsn\n"
+		"5:	seth	r1, #high(9b)\n"
+		"	or3	r1, r1, #low(9b)\n"
+		"	jmp	r1	    ||	ldi	%0, #0\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		"	.balign 4\n"
+		"	.long 0b,4b\n"
+		"	.long 1b,5b\n"
+		".previous"
+		: "=&r" (res), "=r" (s)
+		: "0" (n), "1" (s), "r" (n & 3), "r" (mask), "r"(0x01010101)
+		: "r0", "r1", "cbit");
+
+	/* NOTE: strnlen_user() algorism:
+	 * {
+	 *   char *p;
+	 *   for (p = s; n-- && *p != '\0'; ++p)
+	 *     ;
+	 *   return p - s + 1;
+	 * }
+	 */
+
+	/* NOTE: If a null char. exists, return 0.
+	 * if ((x - 0x01010101) & ~x & 0x80808080)\n"
+	 *   return 0;\n"
+	 */
+
+	return res & mask;
+}
+
+#else /* not CONFIG_ISA_DUAL_ISSUE */
+
+long strnlen_user(const char *s, long n)
+{
+	unsigned long mask = -__addr_ok(s);
+	unsigned long res;
+
+	__asm__ __volatile__(
+		"	and	%0, %5\n"
+		"	mv	r1, %1\n"
+		"	beqz	%0, strnlen_exit\n"
+		"	and3	r0, %1, #3\n"
+		"	bnez	r0, strnlen_byte_loop\n"
+		"	cmpui	%0, #4\n"
+		"	bc	strnlen_byte_loop\n"
+		"	sll3	r3, %6, #7\n"
+		"strnlen_word_loop:\n"
+		"0:	ld	r0, @%1+\n"
+		"	not	r2, r0\n"
+		"	sub	r0, %6\n"
+		"	and	r2, r3\n"
+		"	and	r2, r0\n"
+		"	bnez	r2, strnlen_last_bytes_fixup\n"
+		"	addi	%0, #-4\n"
+		"	beqz	%0, strnlen_exit\n"
+		"	bgtz	%0, strnlen_word_loop\n"
+		"strnlen_last_bytes:\n"
+		"	mv	%0, %4\n"
+		"strnlen_last_bytes_fixup:\n"
+		"	addi	%1, #-4\n"
+		"strnlen_byte_loop:\n"
+		"1:	ldb	r0, @%1\n"
+		"	addi	%0, #-1\n"
+		"	beqz	r0, strnlen_exit\n"
+		"	addi	%1, #1\n"
+		"	bnez	%0, strnlen_byte_loop\n"
+		"strnlen_exit:\n"
+		"	sub	%1, r1\n"
+		"	add3	%0, %1, #1\n"
+		"	.fillinsn\n"
+		"9:\n"
+		".section .fixup,\"ax\"\n"
+		"	.balign 4\n"
+		"4:	addi	%1, #-4\n"
+		"	.fillinsn\n"
+		"5:	ldi	%0, #0\n"
+		"	seth	r1, #high(9b)\n"
+		"	or3	r1, r1, #low(9b)\n"
+		"	jmp	r1\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		"	.balign 4\n"
+		"	.long 0b,4b\n"
+		"	.long 1b,5b\n"
+		".previous"
+		: "=&r" (res), "=r" (s)
+		: "0" (n), "1" (s), "r" (n & 3), "r" (mask), "r"(0x01010101)
+		: "r0", "r1", "r2", "r3", "cbit");
+
+	/* NOTE: strnlen_user() algorism:
+	 * {
+	 *   char *p;
+	 *   for (p = s; n-- && *p != '\0'; ++p)
+	 *     ;
+	 *   return p - s + 1;
+	 * }
+	 */
+
+	/* NOTE: If a null char. exists, return 0.
+	 * if ((x - 0x01010101) & ~x & 0x80808080)\n"
+	 *   return 0;\n"
+	 */
+
+	return res & mask;
+}
+
+#endif /* CONFIG_ISA_DUAL_ISSUE */
+
diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.smp b/arch/m32r/m32700ut/defconfig.m32700ut.smp
new file mode 100644
index 0000000..1c00218
--- /dev/null
+++ b/arch/m32r/m32700ut/defconfig.m32700ut.smp
@@ -0,0 +1,750 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:10:50 2005
+#
+CONFIG_M32R=y
+# CONFIG_UID16 is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Processor type and features
+#
+# CONFIG_PLAT_MAPPI is not set
+# CONFIG_PLAT_USRV is not set
+CONFIG_PLAT_M32700UT=y
+# CONFIG_PLAT_OPSPUT is not set
+# CONFIG_PLAT_OAKS32R is not set
+# CONFIG_PLAT_MAPPI2 is not set
+CONFIG_CHIP_M32700=y
+# CONFIG_CHIP_M32102 is not set
+# CONFIG_CHIP_VDEC2 is not set
+# CONFIG_CHIP_OPSP is not set
+CONFIG_MMU=y
+CONFIG_TLB_ENTRIES=32
+CONFIG_ISA_M32R2=y
+CONFIG_ISA_DSP_LEVEL2=y
+CONFIG_ISA_DUAL_ISSUE=y
+CONFIG_BUS_CLOCK=50000000
+CONFIG_TIMER_DIVIDE=128
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_NOHIGHMEM=y
+# CONFIG_DISCONTIGMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PREEMPT=y
+# CONFIG_HAVE_DEC_LOCK is not set
+CONFIG_SMP=y
+CONFIG_CHIP_M32700_TS1=y
+CONFIG_NR_CPUS=2
+# CONFIG_NUMA is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+# CONFIG_M32R_PCC is not set
+CONFIG_M32R_CFC=y
+CONFIG_M32R_CFC_NUM=1
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_NE2000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_M32R_SIO=y
+CONFIG_SERIAL_M32R_SIO_CONSOLE=y
+CONFIG_SERIAL_M32R_PLDSIO=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_DS1302=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_CPIA is not set
+CONFIG_VIDEO_M32R_AR=y
+CONFIG_VIDEO_M32R_AR_M64278=y
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+CONFIG_JBD_DEBUG=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.up b/arch/m32r/m32700ut/defconfig.m32700ut.up
new file mode 100644
index 0000000..805357f
--- /dev/null
+++ b/arch/m32r/m32700ut/defconfig.m32700ut.up
@@ -0,0 +1,747 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:10:54 2005
+#
+CONFIG_M32R=y
+# CONFIG_UID16 is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor type and features
+#
+# CONFIG_PLAT_MAPPI is not set
+# CONFIG_PLAT_USRV is not set
+CONFIG_PLAT_M32700UT=y
+# CONFIG_PLAT_OPSPUT is not set
+# CONFIG_PLAT_OAKS32R is not set
+# CONFIG_PLAT_MAPPI2 is not set
+CONFIG_CHIP_M32700=y
+# CONFIG_CHIP_M32102 is not set
+# CONFIG_CHIP_VDEC2 is not set
+# CONFIG_CHIP_OPSP is not set
+CONFIG_MMU=y
+CONFIG_TLB_ENTRIES=32
+CONFIG_ISA_M32R2=y
+CONFIG_ISA_DSP_LEVEL2=y
+CONFIG_ISA_DUAL_ISSUE=y
+CONFIG_BUS_CLOCK=50000000
+CONFIG_TIMER_DIVIDE=128
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_NOHIGHMEM=y
+# CONFIG_DISCONTIGMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PREEMPT=y
+# CONFIG_HAVE_DEC_LOCK is not set
+# CONFIG_SMP is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+# CONFIG_M32R_PCC is not set
+CONFIG_M32R_CFC=y
+CONFIG_M32R_CFC_NUM=1
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_NE2000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_M32R_SIO=y
+CONFIG_SERIAL_M32R_SIO_CONSOLE=y
+CONFIG_SERIAL_M32R_PLDSIO=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_DS1302=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_CPIA is not set
+CONFIG_VIDEO_M32R_AR=y
+CONFIG_VIDEO_M32R_AR_M64278=y
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+CONFIG_JBD_DEBUG=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB b/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB
new file mode 100644
index 0000000..525dab4
--- /dev/null
+++ b/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB
@@ -0,0 +1,249 @@
+# .gdbinit file
+# $Id: dot.gdbinit_200MHz_16MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
+#-----
+# NOTE: this file is generated by a script, "gen_gdbinit.pl".
+# (Please type "gen_gdbinit.pl --help" and check the help message).
+# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
+#-----
+# target platform: m32700ut
+
+# setting
+set width 0d70
+set radix 0d16
+
+debug_chaos
+
+# clk xin:cpu:bif:bus=25:200:50:50
+define clock_init
+  set *(unsigned long *)0x00ef4008 = 0x00000000
+  set *(unsigned long *)0x00ef4004 = 0
+  shell sleep 0.1
+  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
+  # and switch off PLL, before resetting the clock gear ratio.
+
+  set *(unsigned long *)0x00ef4024 = 2
+  set *(unsigned long *)0x00ef4020 = 2
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 3
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x00000200
+end
+
+# Initialize SDRAM controller
+define sdram_init
+  # SDIR0
+  set *(unsigned long *)0x00ef6008 = 0x00000182
+  # SDIR1
+  set *(unsigned long *)0x00ef600c = 0x00000001
+  # Initialize wait
+  shell sleep 0.1
+  # Ch0-MOD
+  set *(unsigned long *)0x00ef602c = 0x00000020
+  # Ch0-TR
+  set *(unsigned long *)0x00ef6028 = 0x00041302
+  # Ch0-ADR (size:16MB)
+  set *(unsigned long *)0x00ef6020 = 0x08000002
+  # AutoRef On
+  set *(unsigned long *)0x00ef6004 = 0x00010517
+  # Access enable
+  set *(unsigned long *)0x00ef6024 = 0x00000001
+end
+document sdram_init
+  SDRAM controller initialization
+  0x08000000 - 0x08ffffff (16MB)
+end
+
+# Initialize BSEL3 for UT-CFC
+define cfc_init
+  set $sfrbase = 0xa0ef0000
+# too fast
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
+end
+document cfc_init
+  CF controller initialization
+end
+
+# MMU enable
+define mmu_enable
+  set $evb=0x88000000
+  set *(unsigned long *)0xffff0024=1
+end
+
+# MMU disable
+define mmu_disable
+  set $evb=0
+  set *(unsigned long *)0xffff0024=0
+end
+
+# Show TLB entries
+define show_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set $tlb_tag = *(unsigned long*)$addr
+    set $tlb_data = *(unsigned long*)($addr + 4)
+    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define itlb
+  set $itlb=0xfe000000
+  show_tlb_entries $itlb 0d32
+end
+define dtlb
+  set $dtlb=0xfe000800
+  show_tlb_entries $dtlb 0d32
+end
+
+# Initialize TLB entries
+define init_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set *(unsigned long *)($addr + 0x4) = 0
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define tlb_init
+  set $itlb=0xfe000000
+  init_tlb_entries $itlb 0d32
+  set $dtlb=0xfe000800
+  init_tlb_entries $dtlb 0d32
+end
+
+# Show current task structure
+define show_current
+  set $current = $spi & 0xffffe000
+  printf "$current=0x%08lX\n",$current
+  print *(struct task_struct *)$current
+end
+
+# Show user assigned task structure
+define show_task
+  set  = $arg0 & 0xffffe000
+  printf "$task=0x%08lX\n",$task
+  print *(struct task_struct *)$task
+end
+document show_task
+  Show user assigned task structure
+  arg0 : task structure address
+end
+
+# Show M32R registers
+define show_regs
+  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
+  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
+  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
+  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
+  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
+  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
+  printf "EVB[0x%08lX]\n",$evb
+end
+
+# Setup all
+define setup
+  use_mon_code
+  set *(unsigned int)0xfffffffc=0x60
+  shell sleep 0.1
+  clock_init
+  shell sleep 0.1
+  # SDRAM: 16MB
+  set *(unsigned long *)0x00ef6020 = 0x08000002
+  cfc_init
+  # USB
+  set *(unsigned short *)0xb0301000 = 0x100
+
+  set $evb=0x08000000
+end
+
+# Load modules
+define load_modules
+  use_debug_dma
+  load
+end
+
+# Set kernel parameters
+define set_kernel_parameters
+  set $param = (void*)0x08001000
+  # INITRD_START
+#  set *(unsigned long *)($param + 0x0010) = 0x08300000
+  # INITRD_SIZE
+#  set *(unsigned long *)($param + 0x0014) = 0x00000000
+  # M32R_CPUCLK
+  set *(unsigned long *)($param + 0x0018) = 0d200000000
+  # M32R_BUSCLK
+  set *(unsigned long *)($param + 0x001c) = 0d50000000
+
+  # M32R_TIMER_DIVIDE
+  set *(unsigned long *)($param + 0x0020) = 0d128
+
+  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=16M \0"
+end
+
+# Boot
+define boot
+  set_kernel_parameters
+  set $fp = 0
+  set $pc = 0x08002000
+# set *(unsigned char *)0xffffffff = 0x03
+  si
+  c
+end
+
+# Set breakpoints
+define set_breakpoints
+  b *0x08000030
+end
+
+# Restart
+define restart
+  sdireset
+  sdireset
+  set $pc = 0
+  b *0x04001000
+  b *0x08001000
+  b *0x08002000
+  si
+  c
+  tlb_init
+  del
+  setup
+  load_modules
+  boot
+end
+
+define si
+  stepi
+  x/i $pc
+  show_reg
+end
+
+sdireset
+sdireset
+file vmlinux
+target m32rsdi
+set $pc = 0
+b *0x04001000
+b *0x08001000
+b *0x08002000
+c
+tlb_init
+del
+setup
+load_modules
+boot
+
diff --git a/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB b/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB
new file mode 100644
index 0000000..aa50365
--- /dev/null
+++ b/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB
@@ -0,0 +1,249 @@
+# .gdbinit file
+# $Id: dot.gdbinit_300MHz_32MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
+#-----
+# NOTE: this file is generated by a script, "gen_gdbinit.pl".
+# (Please type "gen_gdbinit.pl --help" and check the help message).
+# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
+#-----
+# target platform: m32700ut
+
+# setting
+set width 0d70
+set radix 0d16
+
+debug_chaos
+
+# clk xin:cpu:bif:bus=25:300:75:75
+define clock_init
+  set *(unsigned long *)0x00ef4008 = 0x00000000
+  set *(unsigned long *)0x00ef4004 = 0
+  shell sleep 0.1
+  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
+  # and switch off PLL, before resetting the clock gear ratio.
+
+  set *(unsigned long *)0x00ef4024 = 2
+  set *(unsigned long *)0x00ef4020 = 2
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 5
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x00000200
+end
+
+# Initialize SDRAM controller
+define sdram_init
+  # SDIR0
+  set *(unsigned long *)0x00ef6008 = 0x00000182
+  # SDIR1
+  set *(unsigned long *)0x00ef600c = 0x00000001
+  # Initialize wait
+  shell sleep 0.1
+  # Ch0-MOD
+  set *(unsigned long *)0x00ef602c = 0x00000020
+  # Ch0-TR
+  set *(unsigned long *)0x00ef6028 = 0x00051502
+  # Ch0-ADR (size:32MB)
+  set *(unsigned long *)0x00ef6020 = 0x08000003
+  # AutoRef On
+  set *(unsigned long *)0x00ef6004 = 0x00010e24
+  # Access enable
+  set *(unsigned long *)0x00ef6024 = 0x00000001
+end
+document sdram_init
+  SDRAM controller initialization
+  0x08000000 - 0x09ffffff (32MB)
+end
+
+# Initialize BSEL3 for UT-CFC
+define cfc_init
+  set $sfrbase = 0xa0ef0000
+# too fast
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
+end
+document cfc_init
+  CF controller initialization
+end
+
+# MMU enable
+define mmu_enable
+  set $evb=0x88000000
+  set *(unsigned long *)0xffff0024=1
+end
+
+# MMU disable
+define mmu_disable
+  set $evb=0
+  set *(unsigned long *)0xffff0024=0
+end
+
+# Show TLB entries
+define show_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set $tlb_tag = *(unsigned long*)$addr
+    set $tlb_data = *(unsigned long*)($addr + 4)
+    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define itlb
+  set $itlb=0xfe000000
+  show_tlb_entries $itlb 0d32
+end
+define dtlb
+  set $dtlb=0xfe000800
+  show_tlb_entries $dtlb 0d32
+end
+
+# Initialize TLB entries
+define init_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set *(unsigned long *)($addr + 0x4) = 0
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define tlb_init
+  set $itlb=0xfe000000
+  init_tlb_entries $itlb 0d32
+  set $dtlb=0xfe000800
+  init_tlb_entries $dtlb 0d32
+end
+
+# Show current task structure
+define show_current
+  set $current = $spi & 0xffffe000
+  printf "$current=0x%08lX\n",$current
+  print *(struct task_struct *)$current
+end
+
+# Show user assigned task structure
+define show_task
+  set  = $arg0 & 0xffffe000
+  printf "$task=0x%08lX\n",$task
+  print *(struct task_struct *)$task
+end
+document show_task
+  Show user assigned task structure
+  arg0 : task structure address
+end
+
+# Show M32R registers
+define show_regs
+  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
+  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
+  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
+  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
+  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
+  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
+  printf "EVB[0x%08lX]\n",$evb
+end
+
+# Setup all
+define setup
+  use_mon_code
+  set *(unsigned int)0xfffffffc=0x60
+  shell sleep 0.1
+  clock_init
+  shell sleep 0.1
+  # SDRAM: 32MB
+  set *(unsigned long *)0x00ef6020 = 0x08000003
+  cfc_init
+  # USB
+  set *(unsigned short *)0xb0301000 = 0x100
+
+  set $evb=0x08000000
+end
+
+# Load modules
+define load_modules
+  use_debug_dma
+  load
+end
+
+# Set kernel parameters
+define set_kernel_parameters
+  set $param = (void*)0x08001000
+  # INITRD_START
+#  set *(unsigned long *)($param + 0x0010) = 0x08300000
+  # INITRD_SIZE
+#  set *(unsigned long *)($param + 0x0014) = 0x00000000
+  # M32R_CPUCLK
+  set *(unsigned long *)($param + 0x0018) = 0d300000000
+  # M32R_BUSCLK
+  set *(unsigned long *)($param + 0x001c) = 0d75000000
+
+  # M32R_TIMER_DIVIDE
+  set *(unsigned long *)($param + 0x0020) = 0d128
+
+  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0"
+end
+
+# Boot
+define boot
+  set_kernel_parameters
+  set $fp = 0
+  set $pc = 0x08002000
+# set *(unsigned char *)0xffffffff = 0x03
+  si
+  c
+end
+
+# Set breakpoints
+define set_breakpoints
+  b *0x08000030
+end
+
+# Restart
+define restart
+  sdireset
+  sdireset
+  set $pc = 0
+  b *0x04001000
+  b *0x08001000
+  b *0x08002000
+  si
+  c
+  tlb_init
+  del
+  setup
+  load_modules
+  boot
+end
+
+define si
+  stepi
+  x/i $pc
+  show_reg
+end
+
+sdireset
+sdireset
+file vmlinux
+target m32rsdi
+set $pc = 0
+b *0x04001000
+b *0x08001000
+b *0x08002000
+c
+tlb_init
+del
+setup
+load_modules
+boot
+
diff --git a/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB b/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB
new file mode 100644
index 0000000..adc608a
--- /dev/null
+++ b/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB
@@ -0,0 +1,249 @@
+# .gdbinit file
+# $Id: dot.gdbinit_400MHz_32MB,v 1.1 2004/10/21 01:41:27 fujiwara Exp $
+#-----
+# NOTE: this file is generated by a script, "gen_gdbinit.pl".
+# (Please type "gen_gdbinit.pl --help" and check the help message).
+# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
+#-----
+# target platform: m32700ut
+
+# setting
+set width 0d70
+set radix 0d16
+
+debug_chaos
+
+# clk xin:cpu:bif:bus=25:400:100:50
+define clock_init
+  set *(unsigned long *)0x00ef4008 = 0x00000000
+  set *(unsigned long *)0x00ef4004 = 0
+  shell sleep 0.1
+  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
+  # and switch off PLL, before resetting the clock gear ratio.
+
+  set *(unsigned long *)0x00ef4024 = 3
+  set *(unsigned long *)0x00ef4020 = 2
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 7
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x00000200
+end
+
+# Initialize SDRAM controller
+define sdram_init
+  # SDIR0
+  set *(unsigned long *)0x00ef6008 = 0x00000182
+  # SDIR1
+  set *(unsigned long *)0x00ef600c = 0x00000001
+  # Initialize wait
+  shell sleep 0.1
+  # Ch0-MOD
+  set *(unsigned long *)0x00ef602c = 0x00000020
+  # Ch0-TR
+  set *(unsigned long *)0x00ef6028 = 0x00041302
+  # Ch0-ADR (size:32MB)
+  set *(unsigned long *)0x00ef6020 = 0x08000003
+  # AutoRef On
+  set *(unsigned long *)0x00ef6004 = 0x00010517
+  # Access enable
+  set *(unsigned long *)0x00ef6024 = 0x00000001
+end
+document sdram_init
+  SDRAM controller initialization
+  0x08000000 - 0x09ffffff (32MB)
+end
+
+# Initialize BSEL3 for UT-CFC
+define cfc_init
+  set $sfrbase = 0xa0ef0000
+# too fast
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
+end
+document cfc_init
+  CF controller initialization
+end
+
+# MMU enable
+define mmu_enable
+  set $evb=0x88000000
+  set *(unsigned long *)0xffff0024=1
+end
+
+# MMU disable
+define mmu_disable
+  set $evb=0
+  set *(unsigned long *)0xffff0024=0
+end
+
+# Show TLB entries
+define show_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set $tlb_tag = *(unsigned long*)$addr
+    set $tlb_data = *(unsigned long*)($addr + 4)
+    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define itlb
+  set $itlb=0xfe000000
+  show_tlb_entries $itlb 0d32
+end
+define dtlb
+  set $dtlb=0xfe000800
+  show_tlb_entries $dtlb 0d32
+end
+
+# Initialize TLB entries
+define init_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set *(unsigned long *)($addr + 0x4) = 0
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define tlb_init
+  set $itlb=0xfe000000
+  init_tlb_entries $itlb 0d32
+  set $dtlb=0xfe000800
+  init_tlb_entries $dtlb 0d32
+end
+
+# Show current task structure
+define show_current
+  set $current = $spi & 0xffffe000
+  printf "$current=0x%08lX\n",$current
+  print *(struct task_struct *)$current
+end
+
+# Show user assigned task structure
+define show_task
+  set  = $arg0 & 0xffffe000
+  printf "$task=0x%08lX\n",$task
+  print *(struct task_struct *)$task
+end
+document show_task
+  Show user assigned task structure
+  arg0 : task structure address
+end
+
+# Show M32R registers
+define show_regs
+  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
+  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
+  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
+  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
+  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
+  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
+  printf "EVB[0x%08lX]\n",$evb
+end
+
+# Setup all
+define setup
+  use_mon_code
+  set *(unsigned int)0xfffffffc=0x60
+  shell sleep 0.1
+  clock_init
+  shell sleep 0.1
+  # SDRAM: 32MB
+  set *(unsigned long *)0x00ef6020 = 0x08000003
+  cfc_init
+  # USB
+  set *(unsigned short *)0xb0301000 = 0x100
+
+  set $evb=0x08000000
+end
+
+# Load modules
+define load_modules
+  use_debug_dma
+  load
+end
+
+# Set kernel parameters
+define set_kernel_parameters
+  set $param = (void*)0x08001000
+  # INITRD_START
+#  set *(unsigned long *)($param + 0x0010) = 0x08300000
+  # INITRD_SIZE
+#  set *(unsigned long *)($param + 0x0014) = 0x00000000
+  # M32R_CPUCLK
+  set *(unsigned long *)($param + 0x0018) = 0d400000000
+  # M32R_BUSCLK
+  set *(unsigned long *)($param + 0x001c) = 0d50000000
+
+  # M32R_TIMER_DIVIDE
+  set *(unsigned long *)($param + 0x0020) = 0d128
+
+  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0"
+end
+
+# Boot
+define boot
+  set_kernel_parameters
+  set $fp = 0
+  set $pc = 0x08002000
+# set *(unsigned char *)0xffffffff = 0x03
+  si
+  c
+end
+
+# Set breakpoints
+define set_breakpoints
+  b *0x08000030
+end
+
+# Restart
+define restart
+  sdireset
+  sdireset
+  set $pc = 0
+  b *0x04001000
+  b *0x08001000
+  b *0x08002000
+  si
+  c
+  tlb_init
+  del
+  setup
+  load_modules
+  boot
+end
+
+define si
+  stepi
+  x/i $pc
+  show_reg
+end
+
+sdireset
+sdireset
+file vmlinux
+target m32rsdi
+set $pc = 0
+b *0x04001000
+b *0x08001000
+b *0x08002000
+c
+tlb_init
+del
+setup
+load_modules
+boot
+
diff --git a/arch/m32r/mappi/defconfig.nommu b/arch/m32r/mappi/defconfig.nommu
new file mode 100644
index 0000000..714aa6e
--- /dev/null
+++ b/arch/m32r/mappi/defconfig.nommu
@@ -0,0 +1,623 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:10:57 2005
+#
+CONFIG_M32R=y
+# CONFIG_UID16 is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_TINY_SHMEM=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor type and features
+#
+CONFIG_PLAT_MAPPI=y
+# CONFIG_PLAT_USRV is not set
+# CONFIG_PLAT_M32700UT is not set
+# CONFIG_PLAT_OPSPUT is not set
+# CONFIG_PLAT_OAKS32R is not set
+# CONFIG_PLAT_MAPPI2 is not set
+CONFIG_CHIP_M32700=y
+# CONFIG_CHIP_M32102 is not set
+# CONFIG_CHIP_VDEC2 is not set
+# CONFIG_CHIP_OPSP is not set
+# CONFIG_MMU is not set
+CONFIG_TLB_ENTRIES=32
+CONFIG_ISA_M32R2=y
+CONFIG_ISA_DSP_LEVEL2=y
+CONFIG_ISA_DUAL_ISSUE=y
+CONFIG_BUS_CLOCK=50000000
+CONFIG_TIMER_DIVIDE=128
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_MEMORY_START=0x00000000
+CONFIG_MEMORY_SIZE=0x00E00000
+CONFIG_NOHIGHMEM=y
+# CONFIG_DISCONTIGMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PREEMPT=y
+# CONFIG_HAVE_DEC_LOCK is not set
+# CONFIG_SMP is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+CONFIG_M32R_PCC=y
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NE2000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_M32R_SIO=y
+CONFIG_SERIAL_M32R_SIO_CONSOLE=y
+# CONFIG_SERIAL_M32R_PLDSIO is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVPTS_FS_XATTR=y
+CONFIG_DEVPTS_FS_SECURITY=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/m32r/mappi/defconfig.smp b/arch/m32r/mappi/defconfig.smp
new file mode 100644
index 0000000..956a8e2
--- /dev/null
+++ b/arch/m32r/mappi/defconfig.smp
@@ -0,0 +1,738 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:11:02 2005
+#
+CONFIG_M32R=y
+# CONFIG_UID16 is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Processor type and features
+#
+CONFIG_PLAT_MAPPI=y
+# CONFIG_PLAT_USRV is not set
+# CONFIG_PLAT_M32700UT is not set
+# CONFIG_PLAT_OPSPUT is not set
+# CONFIG_PLAT_OAKS32R is not set
+# CONFIG_PLAT_MAPPI2 is not set
+CONFIG_CHIP_M32700=y
+# CONFIG_CHIP_M32102 is not set
+# CONFIG_CHIP_VDEC2 is not set
+# CONFIG_CHIP_OPSP is not set
+CONFIG_MMU=y
+CONFIG_TLB_ENTRIES=32
+CONFIG_ISA_M32R2=y
+CONFIG_ISA_DSP_LEVEL2=y
+CONFIG_ISA_DUAL_ISSUE=y
+CONFIG_BUS_CLOCK=10000000
+CONFIG_TIMER_DIVIDE=128
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_NOHIGHMEM=y
+CONFIG_DISCONTIGMEM=y
+CONFIG_IRAM_START=0x00f00000
+CONFIG_IRAM_SIZE=0x00080000
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PREEMPT=y
+# CONFIG_HAVE_DEC_LOCK is not set
+CONFIG_SMP=y
+CONFIG_CHIP_M32700_TS1=y
+CONFIG_NR_CPUS=2
+# CONFIG_NUMA is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+CONFIG_M32R_PCC=y
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=m
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NE2000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_M32R_SIO=y
+CONFIG_SERIAL_M32R_SIO_CONSOLE=y
+# CONFIG_SERIAL_M32R_PLDSIO is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS=y
+CONFIG_JFFS_FS_VERBOSE=0
+CONFIG_JFFS_PROC_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_JFFS2_FS_NOR_ECC is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/m32r/mappi/defconfig.up b/arch/m32r/mappi/defconfig.up
new file mode 100644
index 0000000..c9253e9
--- /dev/null
+++ b/arch/m32r/mappi/defconfig.up
@@ -0,0 +1,734 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:11:07 2005
+#
+CONFIG_M32R=y
+# CONFIG_UID16 is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor type and features
+#
+CONFIG_PLAT_MAPPI=y
+# CONFIG_PLAT_USRV is not set
+# CONFIG_PLAT_M32700UT is not set
+# CONFIG_PLAT_OPSPUT is not set
+# CONFIG_PLAT_OAKS32R is not set
+# CONFIG_PLAT_MAPPI2 is not set
+CONFIG_CHIP_M32700=y
+# CONFIG_CHIP_M32102 is not set
+# CONFIG_CHIP_VDEC2 is not set
+# CONFIG_CHIP_OPSP is not set
+CONFIG_MMU=y
+CONFIG_TLB_ENTRIES=32
+CONFIG_ISA_M32R2=y
+CONFIG_ISA_DSP_LEVEL2=y
+CONFIG_ISA_DUAL_ISSUE=y
+CONFIG_BUS_CLOCK=10000000
+CONFIG_TIMER_DIVIDE=128
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_NOHIGHMEM=y
+CONFIG_DISCONTIGMEM=y
+CONFIG_IRAM_START=0x00f00000
+CONFIG_IRAM_SIZE=0x00080000
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PREEMPT=y
+# CONFIG_HAVE_DEC_LOCK is not set
+# CONFIG_SMP is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+CONFIG_M32R_PCC=y
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=m
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NE2000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_M32R_SIO=y
+CONFIG_SERIAL_M32R_SIO_CONSOLE=y
+# CONFIG_SERIAL_M32R_PLDSIO is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS=y
+CONFIG_JFFS_FS_VERBOSE=0
+CONFIG_JFFS_PROC_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_JFFS2_FS_NOR_ECC is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/m32r/mappi/dot.gdbinit b/arch/m32r/mappi/dot.gdbinit
new file mode 100644
index 0000000..7a1d293
--- /dev/null
+++ b/arch/m32r/mappi/dot.gdbinit
@@ -0,0 +1,242 @@
+# .gdbinit file
+# $Id: dot.gdbinit.mappi,v 1.4 2004/10/20 02:24:37 takata Exp $
+#-----
+# NOTE: this file is generated by a script, "gen_gdbinit.pl".
+# (Please type "gen_gdbinit.pl --help" and check the help message).
+# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
+#-----
+# target platform: mappi
+
+# setting
+set width 0d70
+set radix 0d16
+debug_chaos
+
+# clk xin:cpu:bif:bus=30:360:180:90
+define clock_init
+  set *(unsigned long *)0x00ef4024 = 2
+  set *(unsigned long *)0x00ef4020 = 1
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 5
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x00000200
+end
+
+# Initialize programmable ports
+define port_init
+  set $sfrbase = 0x00ef0000
+  set *(unsigned short *)0x00ef1060 = 0x5555
+  set *(unsigned short *)0x00ef1062 = 0x5555
+  set *(unsigned short *)0x00ef1064 = 0x5555
+  set *(unsigned short *)0x00ef1066 = 0x5555
+  set *(unsigned short *)0x00ef1068 = 0x5555
+  set *(unsigned short *)0x00ef106a = 0x0000
+  set *(unsigned short *)0x00ef106e = 0x5555
+  set *(unsigned short *)0x00ef1070 = 0x5555
+  # LED ON
+  set *(unsigned char *)($sfrbase + 0x1015) = 0xff
+  set *(unsigned char *)($sfrbase + 0x1085) = 0xff
+  shell sleep 0.1
+  # LED OFF
+  set *(unsigned char *)($sfrbase + 0x1085) = 0x00
+end
+document port_init
+  P5=LED(output), P6.b4=LAN_RESET(output)
+end
+
+# Initialize SDRAM controller
+define sdram_init
+  # SDIR0
+  set *(unsigned long *)0x00ef6008 = 0x00000182
+  # SDIR1
+  set *(unsigned long *)0x00ef600c = 0x00000001
+  # Initialize wait
+  shell sleep 0.1
+  # Ch0-MOD
+  set *(unsigned long *)0x00ef602c = 0x00000020
+  # Ch0-TR
+  set *(unsigned long *)0x00ef6028 = 0x00051502
+  # Ch0-ADR (size:64MB)
+  set *(unsigned long *)0x00ef6020 = 0x08000004
+  # AutoRef On
+  set *(unsigned long *)0x00ef6004 = 0x00010e2b
+  # Access enable
+  set *(unsigned long *)0x00ef6024 = 0x00000001
+end
+document sdram_init
+  SDRAM controller initialization
+  0x08000000 - 0x0bffffff (64MB)
+end
+
+# Initialize LAN controller
+define lanc_init
+  set $sfrbase = 0x00ef0000
+  # Set BSEL3 (BSEL3 for the Chaos's bselc)
+  set *(unsigned long *)($sfrbase + 0x5300) = 0x0a0a8040
+  set *(unsigned long *)($sfrbase + 0x5304) = 0x01120203
+  set *(unsigned long *)($sfrbase + 0x5308) = 0x00000001
+  # Reset (P5=LED,P6.b4=LAN_RESET)
+  set *(unsigned short *)($sfrbase + 0x106c) = 0x0000
+  set *(unsigned char *)($sfrbase + 0x1016) = 0xff
+  set *(unsigned char *)($sfrbase + 0x1086) = 0xff
+  shell sleep 0.1
+  # swivel: 0=normal, 4=reverse
+#  set *(unsigned char *)($sfrbase + 0x1086) = 0x00
+  set *(unsigned char *)($sfrbase + 0x1086) = 0x04
+  set *(unsigned long *)(0x0c000330) = 0xffffffff
+  # Set mac address
+  set $lanc = (void*)0x0c000300
+  set *(unsigned long *)($lanc + 0x0000) = 0x00610010
+  set *(unsigned long *)($lanc + 0x0004) = 0x00200030
+  set *(unsigned long *)($lanc + 0x0008) = 0x00400050
+  set *(unsigned long *)($lanc + 0x000c) = 0x00600007
+end
+document lanc_init
+  LAN controller initialization
+  ex.) MAC address:  10 20 30 40 50 60
+end
+
+# LCD & CRT dual-head setting (8bpp)
+define dispc_init
+  set $sfrbase = 0x00ef0000
+  # BSEL4 Dispc
+  set *(unsigned long *)($sfrbase + 0x5400) = 0x0e0e8000
+  set *(unsigned long *)($sfrbase + 0x5404) = 0x0012220a
+end
+
+# MMU enable
+define mmu_enable
+  set $evb=0x88000000
+  set *(unsigned long *)0xffff0024=1
+end
+
+# MMU disable
+define mmu_disable
+  set $evb=0
+  set *(unsigned long *)0xffff0024=0
+end
+
+# Show TLB entries
+define show_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set $tlb_tag = *(unsigned long*)$addr
+    set $tlb_data = *(unsigned long*)($addr + 4)
+    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define itlb
+  set $itlb=0xfe000000
+  show_tlb_entries $itlb 0d32
+end
+define dtlb
+  set $dtlb=0xfe000800
+  show_tlb_entries $dtlb 0d32
+end
+
+# Show current task structure
+define show_current
+  set $current = $spi & 0xffffe000
+  printf "$current=0x%08lX\n",$current
+  print *(struct task_struct *)$current
+end
+
+# Show user assigned task structure
+define show_task
+  set  = $arg0 & 0xffffe000
+  printf "$task=0x%08lX\n",$task
+  print *(struct task_struct *)$task
+end
+document show_task
+  Show user assigned task structure
+  arg0 : task structure address
+end
+
+# Show M32R registers
+define show_regs
+  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
+  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
+  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
+  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
+  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
+  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
+  printf "EVB[0x%08lX]\n",$evb
+end
+
+# Setup all
+define setup
+  use_mon_code
+  set *(unsigned int)0xfffffffc=0x60
+  shell sleep 0.1
+  clock_init
+  shell sleep 0.1
+  port_init
+  sdram_init
+  lanc_init
+  dispc_init
+  set $evb=0x08000000
+end
+
+# Load modules
+define load_modules
+  use_debug_dma
+  load
+end
+
+# Set kernel parameters
+define set_kernel_parameters
+  set $param = (void*)0x08001000
+  # INITRD_START
+#  set *(unsigned long *)($param + 0x0010) = 0x08300000
+  # INITRD_SIZE
+#  set *(unsigned long *)($param + 0x0014) = 0x00000000
+  # M32R_CPUCLK
+  set *(unsigned long *)($param + 0x0018) = 0d360000000
+  # M32R_BUSCLK
+  set *(unsigned long *)($param + 0x001c) = 0d90000000
+
+  # M32R_TIMER_DIVIDE
+  set *(unsigned long *)($param + 0x0020) = 0d128
+
+  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0"
+end
+
+# Boot
+define boot
+  set_kernel_parameters
+  set $fp = 0
+  set $pc = 0x08002000
+  si
+  c
+end
+
+# Set breakpoints
+define set_breakpoints
+  b *0x08000030
+end
+
+# Restart
+define restart
+  sdireset
+  sdireset
+  setup
+  load_modules
+  boot
+end
+
+sdireset
+sdireset
+file vmlinux
+target m32rsdi
+setup
+#load_modules
+#set_breakpoints
+#boot
+
diff --git a/arch/m32r/mappi/dot.gdbinit.nommu b/arch/m32r/mappi/dot.gdbinit.nommu
new file mode 100644
index 0000000..297536c
--- /dev/null
+++ b/arch/m32r/mappi/dot.gdbinit.nommu
@@ -0,0 +1,245 @@
+# .gdbinit file
+# $Id$
+#-----
+# NOTE: this file is generated by a script, "gen_gdbinit.pl".
+# (Please type "gen_gdbinit.pl --help" and check the help message).
+# $ Id: gen_gdbinit.pl,v 1.5 2004/01/23 08:23:25 takata Exp $
+#-----
+# target platform: mappi
+
+# setting
+set width 0d70
+set radix 0d16
+debug_chaos
+
+# clk xin:cpu:bif:bus=25:200:50:50
+define clock_init
+  set *(unsigned long *)0x00ef4024 = 2
+  set *(unsigned long *)0x00ef4020 = 2
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 3
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x00000200
+end
+
+# Initialize programmable ports
+define port_init
+  set $sfrbase = 0x00ef0000
+  set *(unsigned short *)0x00ef1060 = 0x5555
+  set *(unsigned short *)0x00ef1062 = 0x5555
+  set *(unsigned short *)0x00ef1064 = 0x5555
+  set *(unsigned short *)0x00ef1066 = 0x5555
+  set *(unsigned short *)0x00ef1068 = 0x5555
+  set *(unsigned short *)0x00ef106a = 0x0000
+  set *(unsigned short *)0x00ef106e = 0x5555
+  set *(unsigned short *)0x00ef1070 = 0x5555
+  # LED ON
+  set *(unsigned char *)($sfrbase + 0x1015) = 0xff
+  set *(unsigned char *)($sfrbase + 0x1085) = 0xff
+  shell sleep 0.1
+  # LED OFF
+  set *(unsigned char *)($sfrbase + 0x1085) = 0x00
+end
+document port_init
+  P5=LED(output), P6.b4=LAN_RESET(output)
+end
+
+# Initialize SDRAM controller
+define sdram_init
+  # SDIR0
+  set *(unsigned long *)0x00ef6008 = 0x00000182
+  # SDIR1
+  set *(unsigned long *)0x00ef600c = 0x00000001
+  # Initialize wait
+  shell sleep 0.1
+  # Ch0-MOD
+  set *(unsigned long *)0x00ef602c = 0x00000020
+  # Ch0-TR
+  set *(unsigned long *)0x00ef6028 = 0x00051502
+  # Ch0-ADR (size:64MB)
+  set *(unsigned long *)0x00ef6020 = 0x00000004
+  # AutoRef On
+  set *(unsigned long *)0x00ef6004 = 0x00010f05
+  # Access enable
+  set *(unsigned long *)0x00ef6024 = 0x00000001
+end
+document sdram_init
+  SDRAM controller initialization
+  0x08000000 - 0x0bffffff (64MB)
+end
+
+# Initialize LAN controller
+define lanc_init
+  set $sfrbase = 0x00ef0000
+  # Set BSEL3 (BSEL3 for the Chaos's bselc)
+  set *(unsigned long *)($sfrbase + 0x5300) = 0x07078040
+  set *(unsigned long *)($sfrbase + 0x5304) = 0x01110102
+  set *(unsigned long *)($sfrbase + 0x5308) = 0x00000001
+  # Reset (P5=LED,P6.b4=LAN_RESET)
+  set *(unsigned short *)($sfrbase + 0x106c) = 0x0000
+  set *(unsigned char *)($sfrbase + 0x1016) = 0xff
+  set *(unsigned char *)($sfrbase + 0x1086) = 0xff
+  shell sleep 0.1
+  # swivel: 0=normal, 4=reverse
+#  set *(unsigned char *)($sfrbase + 0x1086) = 0x00
+  set *(unsigned char *)($sfrbase + 0x1086) = 0x04
+  set *(unsigned long *)(0x0c000330) = 0xffffffff
+  # Set mac address
+  set $lanc = (void*)0x0c000300
+  set *(unsigned long *)($lanc + 0x0000) = 0x00610010
+  set *(unsigned long *)($lanc + 0x0004) = 0x00200030
+  set *(unsigned long *)($lanc + 0x0008) = 0x00400050
+  set *(unsigned long *)($lanc + 0x000c) = 0x00600007
+end
+document lanc_init
+  LAN controller initialization
+  ex.) MAC address:  10 20 30 40 50 60
+end
+
+# LCD & CRT dual-head setting (8bpp)
+define dispc_init
+  set $sfrbase = 0x00ef0000
+  # BSEL4 Dispc
+  set *(unsigned long *)($sfrbase + 0x5400) = 0x06078000
+  set *(unsigned long *)($sfrbase + 0x5404) = 0x00101101
+end
+
+# MMU enable
+define mmu_enable
+  set $evb=0x88000000
+  set *(unsigned long *)0xffff0024=1
+end
+
+# MMU disable
+define mmu_disable
+  set $evb=0
+  set *(unsigned long *)0xffff0024=0
+end
+
+# Show TLB entries
+define show_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set $tlb_tag = *(unsigned long*)$addr
+    set $tlb_data = *(unsigned long*)($addr + 4)
+    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define itlb
+  set $itlb=0xfe000000
+  show_tlb_entries $itlb 0d32
+end
+define dtlb
+  set $dtlb=0xfe000800
+  show_tlb_entries $dtlb 0d32
+end
+
+# Show current task structure
+define show_current
+  set $current = $spi & 0xffffe000
+  printf "$current=0x%08lX\n",$current
+  print *(struct task_struct *)$current
+end
+
+# Show user assigned task structure
+define show_task
+  set  = $arg0 & 0xffffe000
+  printf "$task=0x%08lX\n",$task
+  print *(struct task_struct *)$task
+end
+document show_task
+  Show user assigned task structure
+  arg0 : task structure address
+end
+
+# Show M32R registers
+define show_regs
+  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
+  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
+  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
+  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
+  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
+  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
+  printf "EVB[0x%08lX]\n",$evb
+end
+
+# Setup all
+define setup
+  use_mon_code
+  set *(unsigned int)0xfffffffc=0x60
+  shell sleep 0.1
+  clock_init
+  shell sleep 0.1
+  port_init
+  sdram_init
+  lanc_init
+  dispc_init
+  set $evb=0x00000000
+end
+
+# Load modules
+define load_modules
+  use_debug_dma
+  load
+end
+
+# Set kernel parameters
+define set_kernel_parameters
+  set $param = (void*)0x00001000
+  # INITRD_START
+  #set *(unsigned long *)($param + 0x0010) = 0x082a0000
+  # INITRD_SIZE
+  #set *(unsigned long *)($param + 0x0014) = 0x00000000
+  # M32R_CPUCLK
+  set *(unsigned long *)($param + 0x0018) = 0d200000000
+  # M32R_BUSCLK
+  set *(unsigned long *)($param + 0x001c) = 0d50000000
+
+  # M32R_TIMER_DIVIDE
+  set *(unsigned long *)($param + 0x0020) = 0d128
+
+  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.bbox-httpd nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0"
+end
+
+# Boot
+define boot
+  set_kernel_parameters
+  set $fp = 0
+  set $pc=0x00002000
+  set *(long *)0xfffffff4=0x8080
+#  b load_flat_binary
+#  set *(unsigned char *)0x08001003=0x63
+#  set *(unsigned char *)0x08001003=0x02
+  si
+#  c
+end
+
+# Set breakpoints
+define set_breakpoints
+  b *0x08000030
+end
+
+# Restart
+define restart
+  sdireset
+  sdireset
+  setup
+  load_modules
+  boot
+end
+
+sdireset
+sdireset
+file vmlinux
+target m32rsdi
+setup
+load_modules
+boot
+
diff --git a/arch/m32r/mappi/dot.gdbinit.smp b/arch/m32r/mappi/dot.gdbinit.smp
new file mode 100644
index 0000000..171489a
--- /dev/null
+++ b/arch/m32r/mappi/dot.gdbinit.smp
@@ -0,0 +1,344 @@
+# .gdbinit file
+# $Id$
+
+# setting
+set width 0d70
+set radix 0d16
+debug_chaos
+
+# clk xin:cpu:bif:bus=1:4:2:1
+define clock_init_on
+  set *(unsigned long *)0x00ef4024 = 2
+  set *(unsigned long *)0x00ef4020 = 1
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 0x1
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x0200
+#  set *(unsigned long *)0x00ef4008 = 0x0201
+end
+
+# clk xin:cpu:bif:bus=1:4:1:1
+define clock_init_on_1411
+  set *(unsigned long *)0x00ef4024 = 2
+  set *(unsigned long *)0x00ef4020 = 2
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 0x1
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x0200
+end
+
+# clk xin:cpu:bif:bus=1:4:2:1
+define clock_init_on_1421
+  set *(unsigned long *)0x00ef4024 = 2
+  set *(unsigned long *)0x00ef4020 = 1
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 0x1
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x0200
+end
+
+# clk xin:cpu:bif:bus=1:8:2:1
+define clock_init_on_1821
+  set *(unsigned long *)0x00ef4024 = 3
+  set *(unsigned long *)0x00ef4020 = 2
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 0x3
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x0200
+end
+
+# clk xin:cpu:bif:bus=1:8:4:1
+define clock_init_on_1841
+  set *(unsigned long *)0x00ef4024 = 3
+  set *(unsigned long *)0x00ef4020 = 1
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 0x3
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x0200
+end
+
+# clk xin:cpu:bif:bus=1:16:8:1
+define clock_init_on_11681
+  set *(unsigned long *)0x00ef4024 = 4
+  set *(unsigned long *)0x00ef4020 = 2
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 0x7
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x0200
+end
+
+# clk xin:cpu:bif:bus=1:1:1:1
+define clock_init_off
+  # CPU
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  # BIF
+  set *(unsigned long *)0x00ef4020 = 0
+  # BUS
+  set *(unsigned long *)0x00ef4024 = 0
+  # PLL
+  set *(unsigned long *)0x00ef4008 = 0x0000
+end
+
+# Initialize programmable ports
+define port_init
+  set $sfrbase = 0x00ef0000
+  set *(unsigned short *)0x00ef1060 = 0x5555
+  set *(unsigned short *)0x00ef1062 = 0x5555
+  set *(unsigned short *)0x00ef1064 = 0x5555
+  set *(unsigned short *)0x00ef1066 = 0x5555
+  set *(unsigned short *)0x00ef1068 = 0x5555
+  set *(unsigned short *)0x00ef106a = 0x0000
+  set *(unsigned short *)0x00ef106e = 0x5555
+  set *(unsigned short *)0x00ef1070 = 0x5555
+  # LED ON
+  set *(unsigned char *)($sfrbase + 0x1015) = 0xff
+  set *(unsigned char *)($sfrbase + 0x1085) = 0xff
+  shell sleep 0.1
+  # LED OFF
+  set *(unsigned char *)($sfrbase + 0x1085) = 0x00
+end
+document port_init
+  P5=LED(output), P6.b4=LAN_RESET(output)
+end
+
+# Initialize SDRAM controller for Mappi
+define sdram_init
+  # SDIR0
+  set *(unsigned long *)0x00ef6008 = 0x00000182
+  # SDIR1
+  set *(unsigned long *)0x00ef600c = 0x00000001
+  # Initialize wait
+  shell sleep 0.1
+  # Ch0-MOD
+  set *(unsigned long *)0x00ef602c = 0x00000020
+  # Ch0-TR
+  set *(unsigned long *)0x00ef6028 = 0x00010002
+  # Ch0-ADR
+  set *(unsigned long *)0x00ef6020 = 0x08000004
+  # AutoRef On
+  set *(unsigned long *)0x00ef6004 = 0x00010107
+  # Access enable
+  set *(unsigned long *)0x00ef6024 = 0x00000001
+end
+document sdram_init
+  Mappi SDRAM controller initialization
+  0x08000000 - 0x0bffffff (64MB)
+end
+
+# Initialize LAN controller for Mappi
+define lanc_init
+  set $sfrbase = 0x00ef0000
+  # Set BSEL3 (BSEL3 for the Chaos's bselc)
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x01018040
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x01011101
+  set *(unsigned long *)($sfrbase + 0x5300) = 0x04048000
+  set *(unsigned long *)($sfrbase + 0x5304) = 0x01011103
+  set *(unsigned long *)($sfrbase + 0x5308) = 0x00000001
+  # Reset (P5=LED,P6.b4=LAN_RESET)
+  set *(unsigned short *)($sfrbase + 0x106c) = 0x0000
+  set *(unsigned char *)($sfrbase + 0x1016) = 0xff
+  set *(unsigned char *)($sfrbase + 0x1086) = 0xff
+  shell sleep 0.1
+#  set *(unsigned char *)($sfrbase + 0x1086) = 0x00
+  set *(unsigned char *)($sfrbase + 0x1086) = 0x04
+  set *(unsigned long *)(0x0c000330) = 0xffffffff
+  # Set mac address
+  set $lanc = (void*)0x0c000300
+  set *(unsigned long *)($lanc + 0x0000) = 0x00610010
+  set *(unsigned long *)($lanc + 0x0004) = 0x00200030
+  set *(unsigned long *)($lanc + 0x0008) = 0x00400050
+  set *(unsigned long *)($lanc + 0x000c) = 0x00600007
+end
+document lanc_init
+  Mappi LAN controller initialization
+  ex.) MAC address:  10 20 30 40 50 60
+end
+
+# LCD & CRT dual-head setting (8bpp)
+define dispc_init
+  set $sfrbase = 0x00ef0000
+  # BSEL4 Dispc
+  # 20MHz
+#  set *(unsigned long *)($sfrbase + 0x5400) = 0x02028282
+#  set *(unsigned long *)($sfrbase + 0x5404) = 0x00122202
+  # 40MHz
+  set *(unsigned long *)($sfrbase + 0x5400) = 0x04048000
+  set *(unsigned long *)($sfrbase + 0x5404) = 0x00101103
+end
+
+# MMU enable
+define mmu_enable
+  set $evb=0x88000000
+  set *(unsigned long *)0xffff0024=1
+end
+
+# MMU disable
+define mmu_disable
+  set $evb=0
+  set *(unsigned long *)0xffff0024=0
+end
+
+# Show TLB entries
+define show_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  use_mon_code
+  while ($i < 0d32 )
+    set $tlb_tag = *(unsigned long*)$addr
+    set $tlb_data = *(unsigned long*)($addr + 4)
+    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define itlb
+  set $itlb=0xfe000000
+  show_tlb_entries $itlb
+end
+define dtlb
+  set $dtlb=0xfe000800
+  show_tlb_entries $dtlb
+end
+
+
+# Show current task structure
+define show_current
+  set $current = $spi & 0xffffe000
+  printf "$current=0x%08lX\n",$current
+  print *(struct task_struct *)$current
+end
+
+# Show user assigned task structure
+define show_task
+  set $task = $arg0 & 0xffffe000
+  printf "$task=0x%08lX\n",$task
+  print *(struct task_struct *)$task
+end
+document show_task
+  Show user assigned task structure
+  arg0 : task structure address
+end
+
+# Show M32R registers
+define show_regs
+  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
+  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
+  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
+  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$fp
+  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
+  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
+  printf "EVB[0x%08lX]\n",$evb
+end
+
+
+# Setup all
+define setup
+  use_mon_code
+  set *(unsigned int)0xfffffffc=0x60
+  shell sleep 0.1
+#  clock_init_on_1411
+  clock_init_on_1421
+#  clock_init_on_1821
+#  clock_init_on_1841
+#  clock_init_on_11681
+#  clock_init_off
+  shell sleep 0.1
+  port_init
+  sdram_init
+  lanc_init
+  dispc_init
+  set $evb=0x08000000
+end
+
+# Load modules
+define load_modules
+  use_debug_dma
+  load
+#  load ramdisk_082a0000.mot
+#  load romfs_082a0000.mot
+#  use_mon_code
+end
+
+# Set kernel parameters
+define set_kernel_parameters
+  set $param = (void*)0x08001000
+  # INITRD_START
+# set *(unsigned long *)($param + 0x0010) = 0x082a0000
+  # INITRD_SIZE
+#  set *(unsigned long *)($param + 0x0014) = 0x00000000
+  # M32R_CPUCLK
+  set *(unsigned long *)($param + 0x0018) = 0d160000000
+#  set *(unsigned long *)($param + 0x0018) = 0d80000000
+#  set *(unsigned long *)($param + 0x0018) = 0d40000000
+  # M32R_BUSCLK
+  set *(unsigned long *)($param + 0x001c) = 0d40000000
+
+  # M32R_TIMER_DIVIDE
+  set *(unsigned long *)($param + 0x0020) = 0d128
+
+  set {char[0x200]}($param + 0x100) = "console=tty1 console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.x nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0"
+#  set {char[0x200]}($param + 0x100) = "console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.x nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0"
+end
+
+# Boot
+define boot
+  set_kernel_parameters
+  set $pc=0x08002000
+  set *(unsigned char *)0x08001003=0x03
+  si
+  c
+end
+
+# Set breakpoints
+define set_breakpoints
+  b *0x08000030
+end
+
+## Boot MP
+define boot_mp
+  set_kernel_parameters
+  set *(unsigned long *)0x00f00000 = boot - 0x80000000
+  set *(unsigned long *)0x00eff2f8 = 0x2
+  x 0x00eff2f8
+
+  set $pc=0x08002000
+  si
+  c
+end
+document boot_mp
+  Boot BSP
+end
+
+## Boot UP
+define boot_up
+  set_kernel_parameters
+  set $pc=0x08002000
+  si
+  c
+end
+document boot_up
+  Boot BSP
+end
+
+# Restart
+define restart
+  sdireset
+  sdireset
+  setup
+  load_modules
+  boot_mp
+end
+
+sdireset
+sdireset
+file vmlinux
+target m32rsdi
+setup
diff --git a/arch/m32r/mappi2/defconfig.vdec2 b/arch/m32r/mappi2/defconfig.vdec2
new file mode 100644
index 0000000..c14791d
--- /dev/null
+++ b/arch/m32r/mappi2/defconfig.vdec2
@@ -0,0 +1,725 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:11:10 2005
+#
+CONFIG_M32R=y
+# CONFIG_UID16 is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor type and features
+#
+# CONFIG_PLAT_MAPPI is not set
+# CONFIG_PLAT_USRV is not set
+# CONFIG_PLAT_M32700UT is not set
+# CONFIG_PLAT_OPSPUT is not set
+# CONFIG_PLAT_OAKS32R is not set
+CONFIG_PLAT_MAPPI2=y
+# CONFIG_CHIP_M32700 is not set
+# CONFIG_CHIP_M32102 is not set
+CONFIG_CHIP_VDEC2=y
+# CONFIG_CHIP_OPSP is not set
+CONFIG_MMU=y
+CONFIG_TLB_ENTRIES=16
+CONFIG_ISA_M32R2=y
+CONFIG_BUS_CLOCK=50000000
+CONFIG_TIMER_DIVIDE=128
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_NOHIGHMEM=y
+# CONFIG_DISCONTIGMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PREEMPT=y
+# CONFIG_HAVE_DEC_LOCK is not set
+# CONFIG_SMP is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+# CONFIG_M32R_CFC is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_NE2000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_M32R_SIO=y
+CONFIG_SERIAL_M32R_SIO_CONSOLE=y
+# CONFIG_SERIAL_M32R_PLDSIO is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_M32R_AR is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+CONFIG_JBD_DEBUG=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/m32r/mappi2/dot.gdbinit.vdec2 b/arch/m32r/mappi2/dot.gdbinit.vdec2
new file mode 100644
index 0000000..797a830
--- /dev/null
+++ b/arch/m32r/mappi2/dot.gdbinit.vdec2
@@ -0,0 +1,233 @@
+# .gdbinit file
+# $Id: dot.gdbinit.vdec2,v 1.2 2004/11/11 02:03:15 takata Exp $
+
+# setting
+set width 0d70
+set radix 0d16
+use_debug_dma
+
+# Initialize SDRAM controller for Mappi
+define sdram_init
+  # SDIR0
+  set *(unsigned long *)0x00ef6008=0x00000182
+  # SDIR1
+  set *(unsigned long *)0x00ef600c=0x00000001
+  # Initialize wait
+  shell sleep 1
+  # Ch0-MOD
+  set *(unsigned long *)0x00ef602c=0x00000020
+  # Ch0-TR
+  set *(unsigned long *)0x00ef6028=0x00041302
+  # Ch0-ADR
+  set *(unsigned long *)0x00ef6020=0x08000004
+  # AutoRef On
+  set *(unsigned long *)0x00ef6004=0x00010705
+  # Access enable
+  set *(unsigned long *)0x00ef6024=0x00000001
+end
+document sdram_init
+  Mappi SDRAM controller initialization
+  0x08000000 - 0x0bffffff (64MB)
+end
+
+# Initialize SDRAM controller for Mappi
+define sdram_init2
+  # SDIR0
+  set *(unsigned long *)0x00ef6008=0x00000182
+  # Ch0-MOD
+  set *(unsigned long *)0x00ef602c=0x00000020
+  # Ch0-TR
+  set *(unsigned long *)0x00ef6028=0x00010002
+  # Ch0-ADR
+  set *(unsigned long *)0x00ef6020=0x08000004
+  # AutoRef On
+  set *(unsigned long *)0x00ef6004=0x00010107
+  # SDIR1
+  set *(unsigned long *)0x00ef600c=0x00000001
+  # Initialize wait
+  shell sleep 1
+  # Access enable
+  set *(unsigned long *)0x00ef6024=0x00000001
+  shell sleep 1
+end
+document sdram_init
+  Mappi SDRAM controller initialization
+  0x08000000 - 0x0bffffff (64MB)
+end
+
+# Initialize LAN controller for Mappi
+define lanc_init
+  # Set BSEL1 (BSEL3 for the Chaos's bselc)
+  #set *(unsigned long *)0x00ef5004 = 0x0fff330f
+  #set *(unsigned long *)0x00ef5004 = 0x01113301
+
+#  set *(unsigned long *)0x00ef5004 = 0x02011101
+#  set *(unsigned long *)0x00ef5004 = 0x04441104
+
+  # BSEL5
+#  set *(unsigned long *)0x00ef5014 = 0x0ccc310c
+#  set *(unsigned long *)0x00ef5014 = 0x0303310f
+#  set *(unsigned long *)0x00ef5014 = 0x01011102 -> NG
+#  set *(unsigned long *)0x00ef5014 = 0x03033103
+
+ set *(unsigned long *)0x00ef500c = 0x0b0b1304
+ set *(unsigned long *)0x00ef5010 = 0x03033302
+# set *(unsigned long *)0x00ef5018 = 0x02223302
+end
+
+# MMU enable
+define mmu_enable
+  set $evb=0x88000000
+  set *(unsigned long *)0xffff0024=1
+end
+
+# MMU disable
+define mmu_disable
+  set $evb=0
+  set *(unsigned long *)0xffff0024=0
+end
+
+# Show TLB entries
+define show_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  while ($i < 0d16 )
+    set $tlb_tag = *(unsigned long*)$addr
+    set $tlb_data = *(unsigned long*)($addr + 4)
+    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+end
+define itlb
+  set $itlb=0xfe000000
+  show_tlb_entries $itlb
+end
+define dtlb
+  set $dtlb=0xfe000800
+  show_tlb_entries $dtlb
+end
+
+# Cache ON
+define set_cache_type
+  set $mctype = (void*)0xfffffff8
+# chaos
+# set *(unsigned long *)($mctype) = 0x0000c000
+# m32102 i-cache only
+  set *(unsigned long *)($mctype) = 0x00008000
+# m32102 d-cache only
+#  set *(unsigned long *)($mctype) = 0x00004000
+end
+define cache_on
+  set $param = (void*)0x08001000
+  set *(unsigned long *)($param) = 0x60ff6102
+end
+
+
+# Show current task structure
+define show_current
+  set $current = $spi & 0xffffe000
+  printf "$current=0x%08lX\n",$current
+  print *(struct task_struct *)$current
+end
+
+# Show user assigned task structure
+define show_task
+  set $task = $arg0 & 0xffffe000
+  printf "$task=0x%08lX\n",$task
+  print *(struct task_struct *)$task
+end
+document show_task
+  Show user assigned task structure
+  arg0 : task structure address
+end
+
+# Show M32R registers
+define show_regs
+  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
+  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
+  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
+  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
+  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
+  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
+  printf "EVB[0x%08lX]\n",$evb
+
+  set $mests = *(unsigned long *)0xffff000c
+  set $mdeva = *(unsigned long *)0xffff0010
+  printf "MESTS[0x%08lX] MDEVA[0x%08lX]\n",$mests,$mdeva
+end
+
+
+# Setup all
+define setup
+  sdram_init
+#  lanc_init
+#  dispc_init
+#  set $evb=0x08000000
+end
+
+# Load modules
+define load_modules
+  use_debug_dma
+  load
+#  load busybox.mot
+end
+
+# Set kernel parameters
+define set_kernel_parameters
+  set $param = (void*)0x08001000
+
+  ## MOUNT_ROOT_RDONLY
+  set {long}($param+0x00)=0
+  ## RAMDISK_FLAGS
+  #set {long}($param+0x04)=0
+  ## ORIG_ROOT_DEV
+  #set {long}($param+0x08)=0x00000100
+  ## LOADER_TYPE
+  #set {long}($param+0x0C)=0
+  ## INITRD_START
+  set {long}($param+0x10)=0x082a0000
+  ## INITRD_SIZE
+  set {long}($param+0x14)=0d6200000
+
+  # M32R_CPUCLK
+  set *(unsigned long *)($param + 0x0018) = 0d25000000
+  # M32R_BUSCLK
+  set *(unsigned long *)($param + 0x001c) = 0d25000000
+  # M32R_TIMER_DIVIDE
+  set *(unsigned long *)($param + 0x0020) = 0d128
+
+
+ set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.2.6 nfsaddrs=192.168.0.102:192.168.0.1:192.168.0.1:255.255.255.0:mappi: \0"
+
+
+end
+
+# Boot
+define boot
+  set_kernel_parameters
+  debug_chaos
+  set $pc=0x08002000
+  set $fp=0
+  del b
+  si
+end
+
+# Restart
+define restart
+  sdireset
+  sdireset
+  setup
+  load_modules
+  boot
+end
+
+sdireset
+sdireset
+file vmlinux
+target m32rsdi
+
+restart
+boot
+
+
diff --git a/arch/m32r/mm/Makefile b/arch/m32r/mm/Makefile
new file mode 100644
index 0000000..c51c1c3
--- /dev/null
+++ b/arch/m32r/mm/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the Linux M32R-specific parts of the memory manager.
+#
+
+ifdef CONFIG_MMU
+obj-y	:= init.o fault.o mmu.o extable.o ioremap.o cache.o page.o
+else
+obj-y 	:= init.o fault-nommu.o mmu.o extable.o ioremap-nommu.o cache.o page.o
+endif
+
+obj-$(CONFIG_DISCONTIGMEM)	+= discontig.o
+
diff --git a/arch/m32r/mm/cache.c b/arch/m32r/mm/cache.c
new file mode 100644
index 0000000..31b0789
--- /dev/null
+++ b/arch/m32r/mm/cache.c
@@ -0,0 +1,65 @@
+/*
+ *  linux/arch/m32r/mm/cache.c
+ *
+ *  Copyright (C) 2002  Hirokazu Takata
+ */
+
+#include <linux/config.h>
+#include <asm/pgtable.h>
+
+#undef MCCR
+
+#if defined(CONFIG_CHIP_XNUX2) || defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_OPSP)
+/* Cache Control Register */
+#define MCCR		((volatile unsigned long*)0xfffffffc)
+#define MCCR_CC		(1UL << 7)	/* Cache mode modify bit */
+#define MCCR_IIV	(1UL << 6)	/* I-cache invalidate */
+#define MCCR_DIV	(1UL << 5)	/* D-cache invalidate */
+#define MCCR_DCB	(1UL << 4)	/* D-cache copy back */
+#define MCCR_ICM	(1UL << 1)	/* I-cache mode [0:off,1:on] */
+#define MCCR_DCM	(1UL << 0)	/* D-cache mode [0:off,1:on] */
+#define MCCR_ICACHE_INV		(MCCR_CC|MCCR_IIV)
+#define MCCR_DCACHE_CB		(MCCR_CC|MCCR_DCB)
+#define MCCR_DCACHE_CBINV	(MCCR_CC|MCCR_DIV|MCCR_DCB)
+#define CHECK_MCCR(mccr)	(mccr = *MCCR)
+#elif defined(CONFIG_CHIP_M32102)
+#define MCCR		((volatile unsigned char*)0xfffffffe)
+#define MCCR_IIV	(1UL << 0)	/* I-cache invalidate */
+#define MCCR_ICACHE_INV		MCCR_IIV
+#endif /* CONFIG_CHIP_XNUX2 || CONFIG_CHIP_M32700 */
+
+#ifndef MCCR
+#error Unknown cache type.
+#endif
+
+
+/* Copy back and invalidate D-cache and invalidate I-cache all */
+void _flush_cache_all(void)
+{
+#if defined(CONFIG_CHIP_M32102)
+	*MCCR = MCCR_ICACHE_INV;
+#else
+	unsigned long mccr;
+
+	/* Copyback and invalidate D-cache */
+	/* Invalidate I-cache */
+	*MCCR = MCCR_ICACHE_INV | MCCR_DCACHE_CBINV;
+	while ((mccr = *MCCR) & MCCR_IIV); /* loop while invalidating... */
+#endif
+}
+
+/* Copy back D-cache and invalidate I-cache all */
+void _flush_cache_copyback_all(void)
+{
+#if defined(CONFIG_CHIP_M32102)
+	*MCCR = MCCR_ICACHE_INV;
+#else
+	unsigned long mccr;
+
+	/* Copyback D-cache */
+	/* Invalidate I-cache */
+	*MCCR = MCCR_ICACHE_INV | MCCR_DCACHE_CB;
+	while ((mccr = *MCCR) & MCCR_IIV); /* loop while invalidating... */
+
+#endif
+}
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
new file mode 100644
index 0000000..1d1a01e
--- /dev/null
+++ b/arch/m32r/mm/discontig.c
@@ -0,0 +1,171 @@
+/*
+ *  linux/arch/m32r/mm/discontig.c
+ *
+ *  Discontig memory support
+ *
+ *  Copyright (c) 2003  Hitoshi Yamamoto
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/initrd.h>
+#include <linux/nodemask.h>
+
+#include <asm/setup.h>
+
+extern char _end[];
+
+struct pglist_data *node_data[MAX_NUMNODES];
+static bootmem_data_t node_bdata[MAX_NUMNODES] __initdata;
+
+pg_data_t m32r_node_data[MAX_NUMNODES];
+
+/* Memory profile */
+typedef struct {
+	unsigned long start_pfn;
+	unsigned long pages;
+	unsigned long holes;
+	unsigned long free_pfn;
+} mem_prof_t;
+static mem_prof_t mem_prof[MAX_NUMNODES];
+
+static void __init mem_prof_init(void)
+{
+	unsigned long start_pfn, holes, free_pfn;
+	const unsigned long zone_alignment = 1UL << (MAX_ORDER - 1);
+	unsigned long ul;
+	mem_prof_t *mp;
+
+	/* Node#0 SDRAM */
+	mp = &mem_prof[0];
+	mp->start_pfn = PFN_UP(CONFIG_MEMORY_START);
+	mp->pages = PFN_DOWN(CONFIG_MEMORY_SIZE);
+	mp->holes = 0;
+	mp->free_pfn = PFN_UP(__pa(_end));
+
+	/* Node#1 internal SRAM */
+	mp = &mem_prof[1];
+	start_pfn = free_pfn = PFN_UP(CONFIG_IRAM_START);
+	holes = 0;
+	if (start_pfn & (zone_alignment - 1)) {
+		ul = zone_alignment;
+		while (start_pfn >= ul)
+			ul += zone_alignment;
+
+		start_pfn = ul - zone_alignment;
+		holes = free_pfn - start_pfn;
+	}
+
+	mp->start_pfn = start_pfn;
+	mp->pages = PFN_DOWN(CONFIG_IRAM_SIZE) + holes;
+	mp->holes = holes;
+	mp->free_pfn = PFN_UP(CONFIG_IRAM_START);
+}
+
+unsigned long __init setup_memory(void)
+{
+	unsigned long bootmap_size;
+	unsigned long min_pfn;
+	int nid;
+	mem_prof_t *mp;
+
+	max_low_pfn = 0;
+	min_low_pfn = -1;
+
+	mem_prof_init();
+
+	for_each_online_node(nid) {
+		mp = &mem_prof[nid];
+		NODE_DATA(nid)=(pg_data_t *)&m32r_node_data[nid];
+		NODE_DATA(nid)->bdata = &node_bdata[nid];
+		min_pfn = mp->start_pfn;
+		max_pfn = mp->start_pfn + mp->pages;
+		bootmap_size = init_bootmem_node(NODE_DATA(nid), mp->free_pfn,
+			mp->start_pfn, max_pfn);
+
+		free_bootmem_node(NODE_DATA(nid), PFN_PHYS(mp->start_pfn),
+			PFN_PHYS(mp->pages));
+
+		reserve_bootmem_node(NODE_DATA(nid), PFN_PHYS(mp->start_pfn),
+			PFN_PHYS(mp->free_pfn - mp->start_pfn) + bootmap_size);
+
+		if (max_low_pfn < max_pfn)
+			max_low_pfn = max_pfn;
+
+		if (min_low_pfn > min_pfn)
+			min_low_pfn = min_pfn;
+	}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (LOADER_TYPE && INITRD_START) {
+		if (INITRD_START + INITRD_SIZE <= PFN_PHYS(max_low_pfn)) {
+			reserve_bootmem_node(NODE_DATA(0), INITRD_START,
+				INITRD_SIZE);
+			initrd_start = INITRD_START ?
+				INITRD_START + PAGE_OFFSET : 0;
+
+			initrd_end = initrd_start + INITRD_SIZE;
+			printk("initrd:start[%08lx],size[%08lx]\n",
+				initrd_start, INITRD_SIZE);
+		} else {
+			printk("initrd extends beyond end of memory "
+				"(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+				INITRD_START + INITRD_SIZE,
+				PFN_PHYS(max_low_pfn));
+
+			initrd_start = 0;
+		}
+	}
+#endif	/* CONFIG_BLK_DEV_INITRD */
+
+	return max_low_pfn;
+}
+
+#define START_PFN(nid)	\
+	(NODE_DATA(nid)->bdata->node_boot_start >> PAGE_SHIFT)
+#define MAX_LOW_PFN(nid)	(NODE_DATA(nid)->bdata->node_low_pfn)
+
+unsigned long __init zone_sizes_init(void)
+{
+	unsigned long zones_size[MAX_NR_ZONES], zholes_size[MAX_NR_ZONES];
+	unsigned long low, start_pfn;
+	unsigned long holes = 0;
+	int nid, i;
+	mem_prof_t *mp;
+
+	pgdat_list = NULL;
+	for (nid = num_online_nodes() - 1 ; nid >= 0 ; nid--) {
+		NODE_DATA(nid)->pgdat_next = pgdat_list;
+		pgdat_list = NODE_DATA(nid);
+	}
+
+	for_each_online_node(nid) {
+		mp = &mem_prof[nid];
+		for (i = 0 ; i < MAX_NR_ZONES ; i++) {
+			zones_size[i] = 0;
+			zholes_size[i] = 0;
+		}
+		start_pfn = START_PFN(nid);
+		low = MAX_LOW_PFN(nid);
+		zones_size[ZONE_DMA] = low - start_pfn;
+		zholes_size[ZONE_DMA] = mp->holes;
+		holes += zholes_size[ZONE_DMA];
+
+		free_area_init_node(nid, NODE_DATA(nid), zones_size,
+			start_pfn, zholes_size);
+	}
+
+	/*
+	 * For test
+	 *  Use all area of internal RAM.
+	 *  see __alloc_pages()
+	 */
+	NODE_DATA(1)->node_zones->pages_min = 0;
+	NODE_DATA(1)->node_zones->pages_low = 0;
+	NODE_DATA(1)->node_zones->pages_high = 0;
+
+	return holes;
+}
+
diff --git a/arch/m32r/mm/extable.c b/arch/m32r/mm/extable.c
new file mode 100644
index 0000000..9a97363
--- /dev/null
+++ b/arch/m32r/mm/extable.c
@@ -0,0 +1,22 @@
+/*
+ * linux/arch/i386/mm/extable.c
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *fixup;
+
+	fixup = search_exception_tables(regs->bpc);
+	if (fixup) {
+		regs->bpc = fixup->fixup;
+		return 1;
+	}
+
+	return 0;
+}
+
diff --git a/arch/m32r/mm/fault-nommu.c b/arch/m32r/mm/fault-nommu.c
new file mode 100644
index 0000000..d9d488d
--- /dev/null
+++ b/arch/m32r/mm/fault-nommu.c
@@ -0,0 +1,165 @@
+/*
+ *  linux/arch/m32r/mm/fault.c
+ *
+ *  Copyright (c) 2001, 2002  Hitoshi Yamamoto, and H. Kondo
+ *
+ *  Some code taken from i386 version.
+ *    Copyright (C) 1995  Linus Torvalds
+ */
+
+/* $Id: fault-nommu.c,v 1.1 2004/03/30 06:40:59 sakugawa Exp $ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/vt_kern.h>              /* For unblank_screen() */
+
+#include <asm/m32r.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+
+extern void die(const char *, struct pt_regs *, long);
+
+#ifndef CONFIG_SMP
+asmlinkage unsigned int tlb_entry_i_dat;
+asmlinkage unsigned int tlb_entry_d_dat;
+#define tlb_entry_i tlb_entry_i_dat
+#define tlb_entry_d tlb_entry_d_dat
+#else
+unsigned int tlb_entry_i_dat[NR_CPUS];
+unsigned int tlb_entry_d_dat[NR_CPUS];
+#define tlb_entry_i tlb_entry_i_dat[smp_processor_id()]
+#define tlb_entry_d tlb_entry_d_dat[smp_processor_id()]
+#endif
+
+/*
+ * Unlock any spinlocks which will prevent us from getting the
+ * message out
+ */
+void bust_spinlocks(int yes)
+{
+	int loglevel_save = console_loglevel;
+
+	if (yes) {
+		oops_in_progress = 1;
+		return;
+	}
+#ifdef CONFIG_VT
+	unblank_screen();
+#endif
+	oops_in_progress = 0;
+	/*
+	 * OK, the message is on the console.  Now we call printk()
+	 * without oops_in_progress set so that printk will give klogd
+	 * a poke.  Hold onto your hats...
+	 */
+	console_loglevel = 15;		/* NMI oopser may have shut the console up */
+	printk(" ");
+	console_loglevel = loglevel_save;
+}
+
+void do_BUG(const char *file, int line)
+{
+	bust_spinlocks(1);
+	printk("kernel BUG at %s:%d!\n", file, line);
+}
+
+/*======================================================================*
+ * do_page_fault()
+ *======================================================================*
+ * This routine handles page faults.  It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * ARGUMENT:
+ *  regs       : M32R SP reg.
+ *  error_code : See below
+ *  address    : M32R MMU MDEVA reg. (Operand ACE)
+ *             : M32R BPC reg. (Instruction ACE)
+ *
+ * error_code :
+ *  bit 0 == 0 means no page found, 1 means protection fault
+ *  bit 1 == 0 means read, 1 means write
+ *  bit 2 == 0 means kernel, 1 means user-mode
+ *======================================================================*/
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code,
+  unsigned long address)
+{
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+
+	bust_spinlocks(1);
+
+	if (address < PAGE_SIZE)
+		printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
+	else
+		printk(KERN_ALERT "Unable to handle kernel paging request");
+	printk(" at virtual address %08lx\n",address);
+	printk(" printing bpc:\n");
+	printk(KERN_ALERT "bpc = %08lx\n", regs->bpc);
+
+	die("Oops", regs, error_code);
+	bust_spinlocks(0);
+	do_exit(SIGKILL);
+}
+
+/*======================================================================*
+ * update_mmu_cache()
+ *======================================================================*/
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
+	pte_t pte)
+{
+	BUG();
+}
+
+/*======================================================================*
+ * flush_tlb_page() : flushes one page
+ *======================================================================*/
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+	BUG();
+}
+
+/*======================================================================*
+ * flush_tlb_range() : flushes a range of pages
+ *======================================================================*/
+void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+	unsigned long end)
+{
+	BUG();
+}
+
+/*======================================================================*
+ * flush_tlb_mm() : flushes the specified mm context TLB's
+ *======================================================================*/
+void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG();
+}
+
+/*======================================================================*
+ * flush_tlb_all() : flushes all processes TLBs
+ *======================================================================*/
+void local_flush_tlb_all(void)
+{
+	BUG();
+}
+
diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c
new file mode 100644
index 0000000..bf7fb58
--- /dev/null
+++ b/arch/m32r/mm/fault.c
@@ -0,0 +1,583 @@
+/*
+ *  linux/arch/m32r/mm/fault.c
+ *
+ *  Copyright (c) 2001, 2002  Hitoshi Yamamoto, and H. Kondo
+ *  Copyright (c) 2004  Naoto Sugai, NIIBE Yutaka
+ *
+ *  Some code taken from i386 version.
+ *    Copyright (C) 1995  Linus Torvalds
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/vt_kern.h>		/* For unblank_screen() */
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+#include <asm/m32r.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+extern void die(const char *, struct pt_regs *, long);
+
+#ifndef CONFIG_SMP
+asmlinkage unsigned int tlb_entry_i_dat;
+asmlinkage unsigned int tlb_entry_d_dat;
+#define tlb_entry_i tlb_entry_i_dat
+#define tlb_entry_d tlb_entry_d_dat
+#else
+unsigned int tlb_entry_i_dat[NR_CPUS];
+unsigned int tlb_entry_d_dat[NR_CPUS];
+#define tlb_entry_i tlb_entry_i_dat[smp_processor_id()]
+#define tlb_entry_d tlb_entry_d_dat[smp_processor_id()]
+#endif
+
+extern void init_tlb(void);
+
+/*
+ * Unlock any spinlocks which will prevent us from getting the
+ * message out
+ */
+void bust_spinlocks(int yes)
+{
+	int loglevel_save = console_loglevel;
+
+	if (yes) {
+		oops_in_progress = 1;
+		return;
+	}
+#ifdef CONFIG_VT
+	unblank_screen();
+#endif
+	oops_in_progress = 0;
+	/*
+	 * OK, the message is on the console.  Now we call printk()
+	 * without oops_in_progress set so that printk will give klogd
+	 * a poke.  Hold onto your hats...
+	 */
+	console_loglevel = 15;		/* NMI oopser may have shut the console up */
+	printk(" ");
+	console_loglevel = loglevel_save;
+}
+
+/*======================================================================*
+ * do_page_fault()
+ *======================================================================*
+ * This routine handles page faults.  It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * ARGUMENT:
+ *  regs       : M32R SP reg.
+ *  error_code : See below
+ *  address    : M32R MMU MDEVA reg. (Operand ACE)
+ *             : M32R BPC reg. (Instruction ACE)
+ *
+ * error_code :
+ *  bit 0 == 0 means no page found, 1 means protection fault
+ *  bit 1 == 0 means read, 1 means write
+ *  bit 2 == 0 means kernel, 1 means user-mode
+ *  bit 3 == 0 means data, 1 means instruction
+ *======================================================================*/
+#define ACE_PROTECTION		1
+#define ACE_WRITE		2
+#define ACE_USERMODE		4
+#define ACE_INSTRUCTION		8
+
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code,
+  unsigned long address)
+{
+	struct task_struct *tsk;
+	struct mm_struct *mm;
+	struct vm_area_struct * vma;
+	unsigned long page, addr;
+	int write;
+	siginfo_t info;
+
+	/*
+	 * If BPSW IE bit enable --> set PSW IE bit
+	 */
+	if (regs->psw & M32R_PSW_BIE)
+		local_irq_enable();
+
+	tsk = current;
+
+	info.si_code = SEGV_MAPERR;
+
+	/*
+	 * We fault-in kernel-space virtual memory on-demand. The
+	 * 'reference' page table is init_mm.pgd.
+	 *
+	 * NOTE! We MUST NOT take any locks for this case. We may
+	 * be in an interrupt or a critical region, and should
+	 * only copy the information from the master page table,
+	 * nothing more.
+	 *
+	 * This verifies that the fault happens in kernel space
+	 * (error_code & ACE_USERMODE) == 0, and that the fault was not a
+	 * protection error (error_code & ACE_PROTECTION) == 0.
+	 */
+	if (address >= TASK_SIZE && !(error_code & ACE_USERMODE))
+		goto vmalloc_fault;
+
+	mm = tsk->mm;
+
+	/*
+	 * If we're in an interrupt or have no user context or are running in an
+	 * atomic region then we must not take the fault..
+	 */
+	if (in_atomic() || !mm)
+		goto bad_area_nosemaphore;
+
+	/* When running in the kernel we expect faults to occur only to
+	 * addresses in user space.  All other faults represent errors in the
+	 * kernel and should generate an OOPS.  Unfortunatly, in the case of an
+	 * erroneous fault occuring in a code path which already holds mmap_sem
+	 * we will deadlock attempting to validate the fault against the
+	 * address space.  Luckily the kernel only validly references user
+	 * space from well defined areas of code, which are listed in the
+	 * exceptions table.
+	 *
+	 * As the vast majority of faults will be valid we will only perform
+	 * the source reference check when there is a possibilty of a deadlock.
+	 * Attempt to lock the address space, if we cannot we then validate the
+	 * source.  If this is invalid we can skip the address space check,
+	 * thus avoiding the deadlock.
+	 */
+	if (!down_read_trylock(&mm->mmap_sem)) {
+		if ((error_code & ACE_USERMODE) == 0 &&
+		    !search_exception_tables(regs->psw))
+			goto bad_area_nosemaphore;
+		down_read(&mm->mmap_sem);
+	}
+
+	vma = find_vma(mm, address);
+	if (!vma)
+		goto bad_area;
+	if (vma->vm_start <= address)
+		goto good_area;
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+#if 0
+	if (error_code & ACE_USERMODE) {
+		/*
+		 * accessing the stack below "spu" is always a bug.
+		 * The "+ 4" is there due to the push instruction
+		 * doing pre-decrement on the stack and that
+		 * doesn't show up until later..
+		 */
+		if (address + 4 < regs->spu)
+			goto bad_area;
+	}
+#endif
+	if (expand_stack(vma, address))
+		goto bad_area;
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+	info.si_code = SEGV_ACCERR;
+	write = 0;
+	switch (error_code & (ACE_WRITE|ACE_PROTECTION)) {
+		default:	/* 3: write, present */
+			/* fall through */
+		case ACE_WRITE:	/* write, not present */
+			if (!(vma->vm_flags & VM_WRITE))
+				goto bad_area;
+			write++;
+			break;
+		case ACE_PROTECTION:	/* read, present */
+		case 0:		/* read, not present */
+			if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+				goto bad_area;
+	}
+
+	/*
+	 * For instruction access exception, check if the area is executable
+	 */
+	if ((error_code & ACE_INSTRUCTION) && !(vma->vm_flags & VM_EXEC))
+	  goto bad_area;
+
+survive:
+	/*
+	 * If for any reason at all we couldn't handle the fault,
+	 * make sure we exit gracefully rather than endlessly redo
+	 * the fault.
+	 */
+	addr = (address & PAGE_MASK);
+	set_thread_fault_code(error_code);
+	switch (handle_mm_fault(mm, vma, addr, write)) {
+		case VM_FAULT_MINOR:
+			tsk->min_flt++;
+			break;
+		case VM_FAULT_MAJOR:
+			tsk->maj_flt++;
+			break;
+		case VM_FAULT_SIGBUS:
+			goto do_sigbus;
+		case VM_FAULT_OOM:
+			goto out_of_memory;
+		default:
+			BUG();
+	}
+	set_thread_fault_code(0);
+	up_read(&mm->mmap_sem);
+	return;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+bad_area:
+	up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+	/* User mode accesses just cause a SIGSEGV */
+	if (error_code & ACE_USERMODE) {
+		tsk->thread.address = address;
+		tsk->thread.error_code = error_code | (address >= TASK_SIZE);
+		tsk->thread.trap_no = 14;
+		info.si_signo = SIGSEGV;
+		info.si_errno = 0;
+		/* info.si_code has been set above */
+		info.si_addr = (void __user *)address;
+		force_sig_info(SIGSEGV, &info, tsk);
+		return;
+	}
+
+no_context:
+	/* Are we prepared to handle this kernel fault?  */
+	if (fixup_exception(regs))
+		return;
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+
+	bust_spinlocks(1);
+
+	if (address < PAGE_SIZE)
+		printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
+	else
+		printk(KERN_ALERT "Unable to handle kernel paging request");
+	printk(" at virtual address %08lx\n",address);
+	printk(KERN_ALERT " printing bpc:\n");
+	printk("%08lx\n", regs->bpc);
+	page = *(unsigned long *)MPTB;
+	page = ((unsigned long *) page)[address >> PGDIR_SHIFT];
+	printk(KERN_ALERT "*pde = %08lx\n", page);
+	if (page & _PAGE_PRESENT) {
+		page &= PAGE_MASK;
+		address &= 0x003ff000;
+		page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT];
+		printk(KERN_ALERT "*pte = %08lx\n", page);
+	}
+	die("Oops", regs, error_code);
+	bust_spinlocks(0);
+	do_exit(SIGKILL);
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+	up_read(&mm->mmap_sem);
+	if (tsk->pid == 1) {
+		yield();
+		down_read(&mm->mmap_sem);
+		goto survive;
+	}
+	printk("VM: killing process %s\n", tsk->comm);
+	if (error_code & ACE_USERMODE)
+		do_exit(SIGKILL);
+	goto no_context;
+
+do_sigbus:
+	up_read(&mm->mmap_sem);
+
+	/* Kernel mode? Handle exception or die */
+	if (!(error_code & ACE_USERMODE))
+		goto no_context;
+
+	tsk->thread.address = address;
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = 14;
+	info.si_signo = SIGBUS;
+	info.si_errno = 0;
+	info.si_code = BUS_ADRERR;
+	info.si_addr = (void __user *)address;
+	force_sig_info(SIGBUS, &info, tsk);
+	return;
+
+vmalloc_fault:
+	{
+		/*
+		 * Synchronize this task's top level page-table
+		 * with the 'reference' page table.
+		 *
+		 * Do _not_ use "tsk" here. We might be inside
+		 * an interrupt in the middle of a task switch..
+		 */
+		int offset = pgd_index(address);
+		pgd_t *pgd, *pgd_k;
+		pmd_t *pmd, *pmd_k;
+		pte_t *pte_k;
+
+		pgd = (pgd_t *)*(unsigned long *)MPTB;
+		pgd = offset + (pgd_t *)pgd;
+		pgd_k = init_mm.pgd + offset;
+
+		if (!pgd_present(*pgd_k))
+			goto no_context;
+
+		/*
+		 * set_pgd(pgd, *pgd_k); here would be useless on PAE
+		 * and redundant with the set_pmd() on non-PAE.
+		 */
+
+		pmd = pmd_offset(pgd, address);
+		pmd_k = pmd_offset(pgd_k, address);
+		if (!pmd_present(*pmd_k))
+			goto no_context;
+		set_pmd(pmd, *pmd_k);
+
+		pte_k = pte_offset_kernel(pmd_k, address);
+		if (!pte_present(*pte_k))
+			goto no_context;
+
+		addr = (address & PAGE_MASK) | (error_code & ACE_INSTRUCTION);
+		update_mmu_cache(NULL, addr, *pte_k);
+		return;
+	}
+}
+
+/*======================================================================*
+ * update_mmu_cache()
+ *======================================================================*/
+#define TLB_MASK	(NR_TLB_ENTRIES - 1)
+#define ITLB_END	(unsigned long *)(ITLB_BASE + (NR_TLB_ENTRIES * 8))
+#define DTLB_END	(unsigned long *)(DTLB_BASE + (NR_TLB_ENTRIES * 8))
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr,
+	pte_t pte)
+{
+	unsigned long *entry1, *entry2;
+	unsigned long pte_data, flags;
+	unsigned int *entry_dat;
+	int inst = get_thread_fault_code() & ACE_INSTRUCTION;
+	int i;
+
+	/* Ptrace may call this routine. */
+	if (vma && current->active_mm != vma->vm_mm)
+		return;
+
+	local_irq_save(flags);
+
+	vaddr = (vaddr & PAGE_MASK) | get_asid();
+
+#ifdef CONFIG_CHIP_OPSP
+	entry1 = (unsigned long *)ITLB_BASE;
+	for(i = 0 ; i < NR_TLB_ENTRIES; i++) {
+	        if(*entry1++ == vaddr) {
+	                pte_data = pte_val(pte);
+	                set_tlb_data(entry1, pte_data);
+	                break;
+	        }
+	        entry1++;
+	}
+	entry2 = (unsigned long *)DTLB_BASE;
+	for(i = 0 ; i < NR_TLB_ENTRIES ; i++) {
+	        if(*entry2++ == vaddr) {
+	                pte_data = pte_val(pte);
+	                set_tlb_data(entry2, pte_data);
+	                break;
+	        }
+	        entry2++;
+	}
+	local_irq_restore(flags);
+	return;
+#else
+	pte_data = pte_val(pte);
+
+	/*
+	 * Update TLB entries
+	 *  entry1: ITLB entry address
+	 *  entry2: DTLB entry address
+	 */
+	__asm__ __volatile__ (
+		"seth	%0, #high(%4)	\n\t"
+		"st	%2, @(%5, %0)	\n\t"
+		"ldi	%1, #1		\n\t"
+		"st	%1, @(%6, %0)	\n\t"
+		"add3	r4, %0, %7	\n\t"
+		".fillinsn		\n"
+		"1:			\n\t"
+		"ld	%1, @(%6, %0)	\n\t"
+		"bnez	%1, 1b		\n\t"
+		"ld	%0, @r4+	\n\t"
+		"ld	%1, @r4		\n\t"
+		"st	%3, @+%0	\n\t"
+		"st	%3, @+%1	\n\t"
+		: "=&r" (entry1), "=&r" (entry2)
+		: "r" (vaddr), "r" (pte_data), "i" (MMU_REG_BASE),
+		"i" (MSVA_offset), "i" (MTOP_offset), "i" (MIDXI_offset)
+		: "r4", "memory"
+	);
+
+	if ((!inst && entry2 >= DTLB_END) || (inst && entry1 >= ITLB_END))
+		goto notfound;
+
+found:
+	local_irq_restore(flags);
+
+	return;
+
+	/* Valid entry not found */
+notfound:
+	/*
+	 * Update ITLB or DTLB entry
+	 *  entry1: TLB entry address
+	 *  entry2: TLB base address
+	 */
+	if (!inst) {
+		entry2 = (unsigned long *)DTLB_BASE;
+		entry_dat = &tlb_entry_d;
+	} else {
+		entry2 = (unsigned long *)ITLB_BASE;
+		entry_dat = &tlb_entry_i;
+	}
+	entry1 = entry2 + (((*entry_dat - 1) & TLB_MASK) << 1);
+
+	for (i = 0 ; i < NR_TLB_ENTRIES ; i++) {
+		if (!(entry1[1] & 2))	/* Valid bit check */
+			break;
+
+		if (entry1 != entry2)
+			entry1 -= 2;
+		else
+			entry1 += TLB_MASK << 1;
+	}
+
+	if (i >= NR_TLB_ENTRIES) {	/* Empty entry not found */
+		entry1 = entry2 + (*entry_dat << 1);
+		*entry_dat = (*entry_dat + 1) & TLB_MASK;
+	}
+	*entry1++ = vaddr;	/* Set TLB tag */
+	set_tlb_data(entry1, pte_data);
+
+	goto found;
+#endif
+}
+
+/*======================================================================*
+ * flush_tlb_page() : flushes one page
+ *======================================================================*/
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+	if (vma->vm_mm && mm_context(vma->vm_mm) != NO_CONTEXT) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		page &= PAGE_MASK;
+		page |= (mm_context(vma->vm_mm) & MMU_CONTEXT_ASID_MASK);
+		__flush_tlb_page(page);
+		local_irq_restore(flags);
+	}
+}
+
+/*======================================================================*
+ * flush_tlb_range() : flushes a range of pages
+ *======================================================================*/
+void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+	unsigned long end)
+{
+	struct mm_struct *mm;
+
+	mm = vma->vm_mm;
+	if (mm_context(mm) != NO_CONTEXT) {
+		unsigned long flags;
+		int size;
+
+		local_irq_save(flags);
+		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+		if (size > (NR_TLB_ENTRIES / 4)) { /* Too many TLB to flush */
+			mm_context(mm) = NO_CONTEXT;
+			if (mm == current->mm)
+				activate_context(mm);
+		} else {
+			unsigned long asid;
+
+			asid = mm_context(mm) & MMU_CONTEXT_ASID_MASK;
+			start &= PAGE_MASK;
+			end += (PAGE_SIZE - 1);
+			end &= PAGE_MASK;
+
+			start |= asid;
+			end   |= asid;
+			while (start < end) {
+				__flush_tlb_page(start);
+				start += PAGE_SIZE;
+			}
+		}
+		local_irq_restore(flags);
+	}
+}
+
+/*======================================================================*
+ * flush_tlb_mm() : flushes the specified mm context TLB's
+ *======================================================================*/
+void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	/* Invalidate all TLB of this process. */
+	/* Instead of invalidating each TLB, we get new MMU context. */
+	if (mm_context(mm) != NO_CONTEXT) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		mm_context(mm) = NO_CONTEXT;
+		if (mm == current->mm)
+			activate_context(mm);
+		local_irq_restore(flags);
+	}
+}
+
+/*======================================================================*
+ * flush_tlb_all() : flushes all processes TLBs
+ *======================================================================*/
+void local_flush_tlb_all(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__flush_tlb_all();
+	local_irq_restore(flags);
+}
+
+/*======================================================================*
+ * init_mmu()
+ *======================================================================*/
+void __init init_mmu(void)
+{
+	tlb_entry_i = 0;
+	tlb_entry_d = 0;
+	mmu_context_cache = MMU_CONTEXT_FIRST_VERSION;
+	set_asid(mmu_context_cache & MMU_CONTEXT_ASID_MASK);
+	*(volatile unsigned long *)MPTB = (unsigned long)swapper_pg_dir;
+}
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
new file mode 100644
index 0000000..bc423d8
--- /dev/null
+++ b/arch/m32r/mm/init.c
@@ -0,0 +1,247 @@
+/*
+ *  linux/arch/m32r/mm/init.c
+ *
+ *  Copyright (c) 2001, 2002  Hitoshi Yamamoto
+ *
+ *  Some code taken from sh version.
+ *    Copyright (C) 1999  Niibe Yutaka
+ *    Based on linux/arch/i386/mm/init.c:
+ *      Copyright (C) 1995  Linus Torvalds
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/bootmem.h>
+#include <linux/swap.h>
+#include <linux/highmem.h>
+#include <linux/bitops.h>
+#include <linux/nodemask.h>
+#include <asm/types.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <asm/setup.h>
+#include <asm/tlb.h>
+
+/* References to section boundaries */
+extern char _text, _etext, _edata;
+extern char __init_begin, __init_end;
+
+pgd_t swapper_pg_dir[1024];
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+void show_mem(void)
+{
+	int total = 0, reserved = 0;
+	int shared = 0, cached = 0;
+	int highmem = 0;
+	struct page *page;
+	pg_data_t *pgdat;
+	unsigned long i;
+
+	printk("Mem-info:\n");
+	show_free_areas();
+	printk("Free swap:       %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
+	for_each_pgdat(pgdat) {
+		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
+			page = pgdat->node_mem_map + i;
+			total++;
+			if (PageHighMem(page))
+				highmem++;
+			if (PageReserved(page))
+				reserved++;
+			else if (PageSwapCache(page))
+				cached++;
+			else if (page_count(page))
+				shared += page_count(page) - 1;
+		}
+	}
+	printk("%d pages of RAM\n", total);
+	printk("%d pages of HIGHMEM\n",highmem);
+	printk("%d reserved pages\n",reserved);
+	printk("%d pages shared\n",shared);
+	printk("%d pages swap cached\n",cached);
+}
+
+/*
+ * Cache of MMU context last used.
+ */
+#ifndef CONFIG_SMP
+unsigned long mmu_context_cache_dat;
+#else
+unsigned long mmu_context_cache_dat[NR_CPUS];
+#endif
+static unsigned long hole_pages;
+
+/*
+ * function prototype
+ */
+void __init paging_init(void);
+void __init mem_init(void);
+void free_initmem(void);
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long, unsigned long);
+#endif
+
+/* It'd be good if these lines were in the standard header file. */
+#define START_PFN(nid)	\
+	(NODE_DATA(nid)->bdata->node_boot_start >> PAGE_SHIFT)
+#define MAX_LOW_PFN(nid)	(NODE_DATA(nid)->bdata->node_low_pfn)
+
+#ifndef CONFIG_DISCONTIGMEM
+unsigned long __init zone_sizes_init(void)
+{
+	unsigned long  zones_size[MAX_NR_ZONES] = {0, 0, 0};
+	unsigned long  max_dma;
+	unsigned long  low;
+	unsigned long  start_pfn;
+
+#ifdef CONFIG_MMU
+	start_pfn = START_PFN(0);
+	max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+	low = MAX_LOW_PFN(0);
+
+	if (low < max_dma){
+		zones_size[ZONE_DMA] = low - start_pfn;
+		zones_size[ZONE_NORMAL] = 0;
+	} else {
+		zones_size[ZONE_DMA] = low - start_pfn;
+		zones_size[ZONE_NORMAL] = low - max_dma;
+	}
+#else
+	zones_size[ZONE_DMA] = 0 >> PAGE_SHIFT;
+	zones_size[ZONE_NORMAL] = __MEMORY_SIZE >> PAGE_SHIFT;
+	start_pfn = __MEMORY_START >> PAGE_SHIFT;
+#endif /* CONFIG_MMU */
+
+	free_area_init_node(0, NODE_DATA(0), zones_size, start_pfn, 0);
+
+	return 0;
+}
+#else	/* CONFIG_DISCONTIGMEM */
+extern unsigned long zone_sizes_init(void);
+#endif	/* CONFIG_DISCONTIGMEM */
+
+/*======================================================================*
+ * paging_init() : sets up the page tables
+ *======================================================================*/
+void __init paging_init(void)
+{
+#ifdef CONFIG_MMU
+	int  i;
+	pgd_t *pg_dir;
+
+	/* We don't need kernel mapping as hardware support that. */
+	pg_dir = swapper_pg_dir;
+
+	for (i = 0 ; i < USER_PTRS_PER_PGD * 2 ; i++)
+		pgd_val(pg_dir[i]) = 0;
+#endif /* CONFIG_MMU */
+	hole_pages = zone_sizes_init();
+}
+
+int __init reservedpages_count(void)
+{
+	int reservedpages, nid, i;
+
+	reservedpages = 0;
+	for_each_online_node(nid)
+		for (i = 0 ; i < MAX_LOW_PFN(nid) - START_PFN(nid) ; i++)
+			if (PageReserved(NODE_DATA(nid)->node_mem_map + i))
+				reservedpages++;
+
+	return reservedpages;
+}
+
+/*======================================================================*
+ * mem_init() :
+ * orig : arch/sh/mm/init.c
+ *======================================================================*/
+void __init mem_init(void)
+{
+	int codesize, reservedpages, datasize, initsize;
+	int nid;
+#ifndef CONFIG_MMU
+	extern unsigned long memory_end;
+#endif
+
+	num_physpages = 0;
+	for_each_online_node(nid)
+		num_physpages += MAX_LOW_PFN(nid) - START_PFN(nid) + 1;
+
+	num_physpages -= hole_pages;
+
+#ifndef CONFIG_DISCONTIGMEM
+	max_mapnr = num_physpages;
+#endif	/* CONFIG_DISCONTIGMEM */
+
+#ifdef CONFIG_MMU
+	high_memory = (void *)__va(PFN_PHYS(MAX_LOW_PFN(0)));
+#else
+	high_memory = (void *)(memory_end & PAGE_MASK);
+#endif /* CONFIG_MMU */
+
+	/* clear the zero-page */
+	memset(empty_zero_page, 0, PAGE_SIZE);
+
+	/* this will put all low memory onto the freelists */
+	for_each_online_node(nid)
+		totalram_pages += free_all_bootmem_node(NODE_DATA(nid));
+
+	reservedpages = reservedpages_count() - hole_pages;
+	codesize = (unsigned long) &_etext - (unsigned long)&_text;
+	datasize = (unsigned long) &_edata - (unsigned long)&_etext;
+	initsize = (unsigned long) &__init_end - (unsigned long)&__init_begin;
+
+	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
+		"%dk reserved, %dk data, %dk init)\n",
+		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+		num_physpages << (PAGE_SHIFT-10),
+		codesize >> 10,
+		reservedpages << (PAGE_SHIFT-10),
+		datasize >> 10,
+		initsize >> 10);
+}
+
+/*======================================================================*
+ * free_initmem() :
+ * orig : arch/sh/mm/init.c
+ *======================================================================*/
+void free_initmem(void)
+{
+	unsigned long addr;
+
+	addr = (unsigned long)(&__init_begin);
+	for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) {
+		ClearPageReserved(virt_to_page(addr));
+		set_page_count(virt_to_page(addr), 1);
+		free_page(addr);
+		totalram_pages++;
+	}
+	printk (KERN_INFO "Freeing unused kernel memory: %dk freed\n", \
+	  (int)(&__init_end - &__init_begin) >> 10);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+/*======================================================================*
+ * free_initrd_mem() :
+ * orig : arch/sh/mm/init.c
+ *======================================================================*/
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+	unsigned long p;
+	for (p = start; p < end; p += PAGE_SIZE) {
+		ClearPageReserved(virt_to_page(p));
+		set_page_count(virt_to_page(p), 1);
+		free_page(p);
+		totalram_pages++;
+	}
+	printk (KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+}
+#endif
+
diff --git a/arch/m32r/mm/ioremap-nommu.c b/arch/m32r/mm/ioremap-nommu.c
new file mode 100644
index 0000000..2759f2d
--- /dev/null
+++ b/arch/m32r/mm/ioremap-nommu.c
@@ -0,0 +1,52 @@
+/*
+ *  linux/arch/m32r/mm/ioremap-nommu.c
+ *
+ *  Copyright (c) 2001, 2002  Hiroyuki Kondo
+ *
+ *  Taken from mips version.
+ *    (C) Copyright 1995 1996 Linus Torvalds
+ *    (C) Copyright 2001 Ralf Baechle
+ */
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <linux/vmalloc.h>
+#include <asm/io.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+
+/*
+ * Remap an arbitrary physical address space into the kernel virtual
+ * address space. Needed when the kernel wants to access high addresses
+ * directly.
+ *
+ * NOTE! We need to allow non-page-aligned mappings too: we will obviously
+ * have to convert them into an offset in a page-aligned mapping, but the
+ * caller shouldn't need to know that small detail.
+ */
+
+#define IS_LOW512(addr) (!((unsigned long)(addr) & ~0x1fffffffUL))
+
+void __iomem *
+__ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags)
+{
+	return (void *)phys_addr;
+}
+
+#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == KSEG1)
+
+void iounmap(volatile void __iomem *addr)
+{
+}
+
diff --git a/arch/m32r/mm/ioremap.c b/arch/m32r/mm/ioremap.c
new file mode 100644
index 0000000..70c5905
--- /dev/null
+++ b/arch/m32r/mm/ioremap.c
@@ -0,0 +1,192 @@
+/*
+ *  linux/arch/m32r/mm/ioremap.c
+ *
+ *  Copyright (c) 2001, 2002  Hiroyuki Kondo
+ *
+ *  Taken from mips version.
+ *    (C) Copyright 1995 1996 Linus Torvalds
+ *    (C) Copyright 2001 Ralf Baechle
+ */
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <linux/vmalloc.h>
+#include <asm/io.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+static inline void
+remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
+	       unsigned long phys_addr, unsigned long flags)
+{
+	unsigned long end;
+	unsigned long pfn;
+	pgprot_t pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_READ
+	                           | _PAGE_WRITE | flags);
+
+	address &= ~PMD_MASK;
+	end = address + size;
+	if (end > PMD_SIZE)
+		end = PMD_SIZE;
+	if (address >= end)
+		BUG();
+	pfn = phys_addr >> PAGE_SHIFT;
+	do {
+		if (!pte_none(*pte)) {
+			printk("remap_area_pte: page already exists\n");
+			BUG();
+		}
+		set_pte(pte, pfn_pte(pfn, pgprot));
+		address += PAGE_SIZE;
+		pfn++;
+		pte++;
+	} while (address && (address < end));
+}
+
+static inline int
+remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
+	       unsigned long phys_addr, unsigned long flags)
+{
+	unsigned long end;
+
+	address &= ~PGDIR_MASK;
+	end = address + size;
+	if (end > PGDIR_SIZE)
+		end = PGDIR_SIZE;
+	phys_addr -= address;
+	if (address >= end)
+		BUG();
+	do {
+		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		if (!pte)
+			return -ENOMEM;
+		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
+		address = (address + PMD_SIZE) & PMD_MASK;
+		pmd++;
+	} while (address && (address < end));
+	return 0;
+}
+
+static int
+remap_area_pages(unsigned long address, unsigned long phys_addr,
+		 unsigned long size, unsigned long flags)
+{
+	int error;
+	pgd_t * dir;
+	unsigned long end = address + size;
+
+	phys_addr -= address;
+	dir = pgd_offset(&init_mm, address);
+	flush_cache_all();
+	if (address >= end)
+		BUG();
+	spin_lock(&init_mm.page_table_lock);
+	do {
+		pmd_t *pmd;
+		pmd = pmd_alloc(&init_mm, dir, address);
+		error = -ENOMEM;
+		if (!pmd)
+			break;
+		if (remap_area_pmd(pmd, address, end - address,
+					 phys_addr + address, flags))
+			break;
+		error = 0;
+		address = (address + PGDIR_SIZE) & PGDIR_MASK;
+		dir++;
+	} while (address && (address < end));
+	spin_unlock(&init_mm.page_table_lock);
+	flush_tlb_all();
+	return error;
+}
+
+/*
+ * Generic mapping function (not visible outside):
+ */
+
+/*
+ * Remap an arbitrary physical address space into the kernel virtual
+ * address space. Needed when the kernel wants to access high addresses
+ * directly.
+ *
+ * NOTE! We need to allow non-page-aligned mappings too: we will obviously
+ * have to convert them into an offset in a page-aligned mapping, but the
+ * caller shouldn't need to know that small detail.
+ */
+
+#define IS_LOW512(addr) (!((unsigned long)(addr) & ~0x1fffffffUL))
+
+void __iomem *
+__ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags)
+{
+	void __iomem * addr;
+	struct vm_struct * area;
+	unsigned long offset, last_addr;
+
+	/* Don't allow wraparound or zero size */
+	last_addr = phys_addr + size - 1;
+	if (!size || last_addr < phys_addr)
+		return NULL;
+
+	/*
+	 * Map objects in the low 512mb of address space using KSEG1, otherwise
+	 * map using page tables.
+	 */
+	if (IS_LOW512(phys_addr) && IS_LOW512(phys_addr + size - 1))
+		return (void *) KSEG1ADDR(phys_addr);
+
+	/*
+	 * Don't allow anybody to remap normal RAM that we're using..
+	 */
+	if (phys_addr < virt_to_phys(high_memory)) {
+		char *t_addr, *t_end;
+		struct page *page;
+
+		t_addr = __va(phys_addr);
+		t_end = t_addr + (size - 1);
+
+		for(page = virt_to_page(t_addr); page <= virt_to_page(t_end); page++)
+			if(!PageReserved(page))
+				return NULL;
+	}
+
+	/*
+	 * Mappings have to be page-aligned
+	 */
+	offset = phys_addr & ~PAGE_MASK;
+	phys_addr &= PAGE_MASK;
+	size = PAGE_ALIGN(last_addr + 1) - phys_addr;
+
+	/*
+	 * Ok, go for it..
+	 */
+	area = get_vm_area(size, VM_IOREMAP);
+	if (!area)
+		return NULL;
+	area->phys_addr = phys_addr;
+	addr = (void __iomem *) area->addr;
+	if (remap_area_pages((unsigned long)addr, phys_addr, size, flags)) {
+		vunmap((void __force *) addr);
+		return NULL;
+	}
+
+	return (void __iomem *) (offset + (char __iomem *)addr);
+}
+
+#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == KSEG1)
+
+void iounmap(volatile void __iomem *addr)
+{
+	if (!IS_KSEG1(addr))
+		vfree((void *) (PAGE_MASK & (unsigned long) addr));
+}
+
diff --git a/arch/m32r/mm/mmu.S b/arch/m32r/mm/mmu.S
new file mode 100644
index 0000000..0c28f11
--- /dev/null
+++ b/arch/m32r/mm/mmu.S
@@ -0,0 +1,350 @@
+/*
+ *  linux/arch/m32r/mm/mmu.S
+ *
+ *  Copyright (C) 2001 by Hiroyuki Kondo
+ */
+
+/* $Id: mmu.S,v 1.15 2004/03/16 02:56:27 takata Exp $ */
+
+#include <linux/config.h>	/* CONFIG_MMU */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/smp.h>
+
+	.text
+#ifdef CONFIG_MMU
+
+#include <asm/mmu_context.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/m32r.h>
+
+/*
+ * TLB Miss Exception handler
+ */
+	.balign	16
+ENTRY(tme_handler)
+	.global	tlb_entry_i_dat
+	.global	tlb_entry_d_dat
+
+	SWITCH_TO_KERNEL_STACK
+
+#if defined(CONFIG_ISA_M32R2)
+	st	r0, @-sp
+	st	r1, @-sp
+	st	r2, @-sp
+	st	r3, @-sp
+
+	seth	r3, #high(MMU_REG_BASE)
+	ld	r1, @(MESTS_offset, r3)	; r1: status     (MESTS reg.)
+	ld	r0, @(MDEVP_offset, r3)	; r0: PFN + ASID (MDEVP reg.)
+	st	r1, @(MESTS_offset, r3)	; clear status   (MESTS reg.)
+	and3	r1, r1, #(MESTS_IT)
+	bnez	r1, 1f			; instruction TLB miss?
+
+;; data TLB miss
+;;  input
+;;   r0: PFN + ASID (MDEVP reg.)
+;;   r1 - r3: free
+;;  output
+;;   r0: PFN + ASID
+;;   r1: TLB entry base address
+;;   r2: &tlb_entry_{i|d}_dat
+;;   r3: free
+
+#ifndef CONFIG_SMP
+	seth	r2, #high(tlb_entry_d_dat)
+	or3	r2, r2, #low(tlb_entry_d_dat)
+#else	/* CONFIG_SMP */
+	ldi	r1, #-8192
+	seth	r2, #high(tlb_entry_d_dat)
+	or3	r2, r2, #low(tlb_entry_d_dat)
+	and	r1, sp
+	ld	r1, @(16, r1)		; current_thread_info->cpu
+	slli	r1, #2
+	add	r2, r1
+#endif	/* !CONFIG_SMP */
+	seth	r1, #high(DTLB_BASE)
+	or3	r1, r1, #low(DTLB_BASE)
+	bra	2f
+
+	.balign	16
+	.fillinsn
+1:
+;; instrucntion TLB miss
+;;  input
+;;   r0: MDEVP reg. (included ASID)
+;;   r1 - r3: free
+;;  output
+;;   r0: PFN + ASID
+;;   r1: TLB entry base address
+;;   r2: &tlb_entry_{i|d}_dat
+;;   r3: free
+	ldi	r3, #-4096
+	and3	r0, r0, #(MMU_CONTEXT_ASID_MASK)
+	mvfc	r1, bpc
+	and	r1, r3
+	or	r0, r1			; r0: PFN + ASID
+#ifndef CONFIG_SMP
+	seth	r2, #high(tlb_entry_i_dat)
+	or3	r2, r2, #low(tlb_entry_i_dat)
+#else	/* CONFIG_SMP */
+	ldi	r1, #-8192
+	seth	r2, #high(tlb_entry_i_dat)
+	or3	r2, r2, #low(tlb_entry_i_dat)
+	and	r1, sp
+	ld	r1, @(16, r1)		; current_thread_info->cpu
+	slli	r1, #2
+	add	r2, r1
+#endif	/* !CONFIG_SMP */
+	seth	r1, #high(ITLB_BASE)
+	or3	r1, r1, #low(ITLB_BASE)
+
+	.fillinsn
+2:
+;; select TLB entry
+;;  input
+;;   r0: PFN + ASID
+;;   r1: TLB entry base address
+;;   r2: &tlb_entry_{i|d}_dat
+;;   r3: free
+;;  output
+;;   r0: PFN + ASID
+;;   r1: TLB entry address
+;;   r2, r3: free
+#ifdef CONFIG_ISA_DUAL_ISSUE
+	ld	r3, @r2		||	srli	r1, #3
+#else
+	ld	r3, @r2
+	srli	r1, #3
+#endif
+	add	r1, r3
+	; tlb_entry_{d|i}_dat++;
+	addi	r3, #1
+	and3	r3, r3, #(NR_TLB_ENTRIES - 1)
+#ifdef CONFIG_ISA_DUAL_ISSUE
+	st	r3, @r2		||	slli	r1, #3
+#else
+	st	r3, @r2
+	slli	r1, #3
+#endif
+
+;; load pte
+;;  input
+;;   r0: PFN + ASID
+;;   r1: TLB entry address
+;;   r2, r3: free
+;;  output
+;;   r0: PFN + ASID
+;;   r1: TLB entry address
+;;   r2: pte_data
+;;   r3: free
+	; pgd = *(unsigned long *)MPTB;
+	ld24	r2, #(-MPTB - 1)
+	srl3	r3, r0, #22
+#ifdef CONFIG_ISA_DUAL_ISSUE
+	not	r2, r2		    ||	slli	r3, #2	; r3: pgd offset
+#else
+	not	r2, r2
+	slli	r3, #2
+#endif
+	ld	r2, @r2			; r2: pgd base addr (MPTB reg.)
+	or	r3, r2			; r3: pmd addr
+
+	; pmd = pmd_offset(pgd, address);
+	ld	r3, @r3			; r3: pmd data
+	ldi	r2, #-4096
+	beqz	r3, 3f			; pmd_none(*pmd) ?
+
+	; pte = pte_offset(pmd, address);
+	and	r2, r3			; r2: pte base addr
+	srl3	r3, r0, #10
+	and3	r3, r3, #0xffc		; r3: pte offset
+	or	r3, r2
+	seth	r2, #0x8000
+	or	r3, r2			; r3: pte addr
+
+	; pte_data = (unsigned long)pte_val(*pte);
+	ld	r2, @r3			; r2: pte data
+	or3	r2, r2, #2		; _PAGE_PRESENT(=2)
+
+	.fillinsn
+5:
+;; set tlb
+;;  input
+;;   r0: PFN + ASID
+;;   r1: TLB entry address
+;;   r2: pte_data
+;;   r3: free
+	st	r0, @r1			; set_tlb_tag(entry++, address);
+	st	r2, @+r1		; set_tlb_data(entry, pte_data);
+
+	.fillinsn
+6:
+	ld	r3, @sp+
+	ld	r2, @sp+
+	ld	r1, @sp+
+	ld	r0, @sp+
+	rte
+
+	.fillinsn
+3:
+;; error
+;;  input
+;;   r0: PFN + ASID
+;;   r1: TLB entry address
+;;   r2, r3: free
+;;  output
+;;   r0: PFN + ASID
+;;   r1: TLB entry address
+;;   r2: pte_data
+;;   r3: free
+#ifdef CONFIG_ISA_DUAL_ISSUE
+	bra	5b		    ||	ldi	r2, #2
+#else
+	ldi	r2, #2		; r2: pte_data = 0 | _PAGE_PRESENT(=2)
+	bra	5b
+#endif
+
+#elif defined (CONFIG_ISA_M32R)
+
+	st	sp, @-sp
+	st	r0, @-sp
+	st	r1, @-sp
+	st	r2, @-sp
+	st	r3, @-sp
+	st	r4, @-sp
+
+	seth	r3, #high(MMU_REG_BASE)
+	ld	r0, @(MDEVA_offset,r3)	; r0: address  (MDEVA reg.)
+	mvfc	r2, bpc			; r2: bpc
+	ld	r1, @(MESTS_offset,r3)	; r1: status   (MESTS reg.)
+	st	r1, @(MESTS_offset,r3)	; clear status (MESTS reg.)
+	and3	r1, r1, #(MESTS_IT)
+	beqz	r1, 1f			; data TLB miss?
+
+;; instrucntion TLB miss
+	mv	r0, r2			; address = bpc;
+	; entry = (unsigned long *)ITLB_BASE+tlb_entry_i*2;
+	seth	r3, #shigh(tlb_entry_i_dat)
+	ld	r4, @(low(tlb_entry_i_dat),r3)
+	sll3	r2, r4, #3
+	seth	r1, #high(ITLB_BASE)
+	or3	r1, r1, #low(ITLB_BASE)
+	add	r2, r1			; r2: entry
+	addi	r4, #1			; tlb_entry_i++;
+	and3	r4, r4, #(NR_TLB_ENTRIES-1)
+	st	r4, @(low(tlb_entry_i_dat),r3)
+	bra	2f
+	.fillinsn
+1:
+;; data TLB miss
+	; entry = (unsigned long *)DTLB_BASE+tlb_entry_d*2;
+	seth	r3, #shigh(tlb_entry_d_dat)
+	ld	r4, @(low(tlb_entry_d_dat),r3)
+	sll3	r2, r4, #3
+	seth	r1, #high(DTLB_BASE)
+	or3	r1, r1, #low(DTLB_BASE)
+	add	r2, r1			; r2: entry
+	addi	r4, #1			; tlb_entry_d++;
+	and3	r4, r4, #(NR_TLB_ENTRIES-1)
+	st	r4, @(low(tlb_entry_d_dat),r3)
+	.fillinsn
+2:
+;; load pte
+; r0: address, r2: entry
+; r1,r3,r4: (free)
+	; pgd = *(unsigned long *)MPTB;
+	ld24	r1, #(-MPTB-1)
+	not	r1, r1
+	ld	r1, @r1
+	srl3	r4, r0, #22
+	sll3	r3, r4, #2
+	add	r3, r1			; r3: pgd
+	; pmd = pmd_offset(pgd, address);
+	ld	r1, @r3			; r1: pmd
+	beqz	r1, 3f			; pmd_none(*pmd) ?
+;
+	and3	r1, r1, #0xeff
+	ldi	r4, #611		; _KERNPG_TABLE(=611)
+	beq	r1, r4, 4f		; !pmd_bad(*pmd) ?
+	.fillinsn
+3:
+	ldi	r1, #0			; r1: pte_data = 0
+	bra	5f
+	.fillinsn
+4:
+	; pte = pte_offset(pmd, address);
+	ld	r4, @r3			; r4: pte
+	ldi	r3, #-4096
+	and	r4, r3
+	srl3	r3, r0, #10
+	and3	r3, r3, #0xffc
+	add	r4, r3
+	seth	r3, #0x8000
+	add	r4, r3			; r4: pte
+	; pte_data = (unsigned long)pte_val(*pte);
+	ld	r1, @r4			; r1: pte_data
+	.fillinsn
+
+;; set tlb
+; r0: address, r1: pte_data, r2: entry
+; r3,r4: (free)
+5:
+	ldi	r3, #-4096		; set_tlb_tag(entry++, address);
+	and	r3, r0
+	seth	r4, #shigh(MASID)
+	ld	r4, @(low(MASID),r4)	; r4: MASID
+	and3	r4, r4, #(MMU_CONTEXT_ASID_MASK)
+	or	r3, r4
+	st	r3, @r2
+	or3	r4, r1, #2		; _PAGE_PRESENT(=2)
+	st	r4, @(4,r2)		; set_tlb_data(entry, pte_data);
+
+	ld	r4, @sp+
+	ld	r3, @sp+
+	ld	r2, @sp+
+	ld	r1, @sp+
+	ld	r0, @sp+
+	ld	sp, @sp+
+	rte
+
+#else
+#error unknown isa configuration
+#endif
+
+ENTRY(init_tlb)
+;; Set MMU Register
+	seth	r0, #high(MMU_REG_BASE)	 ; Set MMU_REG_BASE higher
+	or3	r0, r0, #low(MMU_REG_BASE)  ; Set MMU_REG_BASE lower
+	ldi	r1, #0
+	st	r1, @(MPSZ_offset,r0)	; Set MPSZ Reg(Page size 4KB:0 16KB:1 64KB:2)
+	ldi	r1, #0
+	st	r1, @(MASID_offset,r0)	; Set ASID Zero
+
+;; Set TLB
+	seth	r0, #high(ITLB_BASE)	; Set ITLB_BASE higher
+	or3	r0, r0, #low(ITLB_BASE)	; Set ITLB_BASE lower
+	seth	r1, #high(DTLB_BASE)	; Set DTLB_BASE higher
+	or3	r1, r1, #low(DTLB_BASE)	; Set DTLB_BASE lower
+	ldi	r2, #0
+	ldi	r3, #NR_TLB_ENTRIES
+	addi	r0, #-4
+	addi	r1, #-4
+clear_tlb:
+	st	r2, @+r0		; VPA <- 0
+	st	r2, @+r0		; PPA <- 0
+	st	r2, @+r1		; VPA <- 0
+	st	r2, @+r1		; PPA <- 0
+	addi	r3, #-1
+	bnez	r3, clear_tlb
+;;
+	jmp	r14
+
+ENTRY(m32r_itlb_entrys)
+ENTRY(m32r_otlb_entrys)
+
+#endif  /* CONFIG_MMU */
+
+.end
+
diff --git a/arch/m32r/mm/page.S b/arch/m32r/mm/page.S
new file mode 100644
index 0000000..a2e9367
--- /dev/null
+++ b/arch/m32r/mm/page.S
@@ -0,0 +1,82 @@
+/*
+ *  linux/arch/m32r/mm/page.S
+ *
+ *  Clear/Copy page with CPU
+ *
+ *  Copyright (C) 2004  The Free Software Initiative of Japan
+ *
+ *  Written by Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+	.text
+	.global	copy_page
+	/*
+	 * copy_page (to, from)
+	 *
+	 * PAGE_SIZE = 4096-byte
+	 * Cache line = 16-byte
+	 * 16 * 256
+	 */
+	.align	4
+copy_page:
+	ldi	r2, #255
+	ld	r3, @r0		/* cache line allocate */
+	ld	r4, @r1+
+	ld	r5, @r1+
+	ld	r6, @r1+
+	ld	r7, @r1+
+	.fillinsn
+0:
+	st	r4, @r0
+	st	r5, @+r0
+	st	r6, @+r0
+	st	r7, @+r0
+	ld	r4, @r1+
+	addi	r0, #4
+	ld	r5, @r1+
+	ld	r6, @r1+
+	ld	r7, @r1+
+	ld	r3, @r0		/* cache line allocate */
+	addi	r2, #-1
+	bnez	r2, 0b
+
+	st	r4, @r0
+	st	r5, @+r0
+	st	r6, @+r0
+	st	r7, @+r0
+	jmp	r14
+
+	.text
+	.global	clear_page
+	/*
+	 * clear_page (to)
+	 *
+	 * PAGE_SIZE = 4096-byte
+	 * Cache line = 16-byte
+	 * 16 * 256
+	 */
+	.align	4
+clear_page:
+	ldi	r2, #255
+	ldi	r4, #0
+	ld	r3, @r0		/* cache line allocate */
+	.fillinsn
+0:
+	st	r4, @r0
+	st	r4, @+r0
+	st	r4, @+r0
+	st	r4, @+r0
+	addi	r0, #4
+	ld	r3, @r0		/* cache line allocate */
+	addi	r2, #-1
+	bnez	r2, 0b
+
+	st	r4, @r0
+	st	r4, @+r0
+	st	r4, @+r0
+	st	r4, @+r0
+	jmp	r14
diff --git a/arch/m32r/oaks32r/defconfig.nommu b/arch/m32r/oaks32r/defconfig.nommu
new file mode 100644
index 0000000..f2da9be
--- /dev/null
+++ b/arch/m32r/oaks32r/defconfig.nommu
@@ -0,0 +1,602 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:11:13 2005
+#
+CONFIG_M32R=y
+# CONFIG_UID16 is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_TINY_SHMEM=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor type and features
+#
+# CONFIG_PLAT_MAPPI is not set
+# CONFIG_PLAT_USRV is not set
+# CONFIG_PLAT_M32700UT is not set
+# CONFIG_PLAT_OPSPUT is not set
+CONFIG_PLAT_OAKS32R=y
+# CONFIG_PLAT_MAPPI2 is not set
+# CONFIG_CHIP_M32700 is not set
+CONFIG_CHIP_M32102=y
+# CONFIG_CHIP_VDEC2 is not set
+# CONFIG_CHIP_OPSP is not set
+CONFIG_ISA_M32R=y
+CONFIG_BUS_CLOCK=33333333
+CONFIG_TIMER_DIVIDE=128
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_MEMORY_START=0x01000000
+CONFIG_MEMORY_SIZE=0x00800000
+CONFIG_NOHIGHMEM=y
+# CONFIG_DISCONTIGMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PREEMPT=y
+# CONFIG_HAVE_DEC_LOCK is not set
+# CONFIG_SMP is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NE2000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_M32R_SIO=y
+CONFIG_SERIAL_M32R_SIO_CONSOLE=y
+# CONFIG_SERIAL_M32R_PLDSIO is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+CONFIG_DEVPTS_FS_XATTR=y
+CONFIG_DEVPTS_FS_SECURITY=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/m32r/oaks32r/dot.gdbinit.nommu b/arch/m32r/oaks32r/dot.gdbinit.nommu
new file mode 100644
index 0000000..d481d97
--- /dev/null
+++ b/arch/m32r/oaks32r/dot.gdbinit.nommu
@@ -0,0 +1,154 @@
+# .gdbinit file
+# $Id: dot.gdbinit.oaks32r,v 1.4 2004/10/20 02:24:37 takata Exp $
+#-----
+# NOTE: this file is generated by a script, "gen_gdbinit.pl".
+# (Please type "gen_gdbinit.pl --help" and check the help message).
+# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
+#-----
+# target platform: oaks32r
+
+# setting
+set width 0d70
+set radix 0d16
+
+# clk xin:cpu:bus=16:66:33
+define clock_init
+  set *(unsigned long *)0x00ef4008 = 1
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4000 = 0x00020100
+end
+
+# Initialize programmable ports
+define port_init
+  set *(unsigned long *)0x00ef1000 = 0x1
+  set *(unsigned long *)0x00ef1060 = 0x01400001
+  set *(unsigned long *)0x00ef1064 = 0x00015555
+  set *(unsigned long *)0x00ef1068 = 0x55555050
+  set *(unsigned long *)0x00ef106c = 0x05150040
+end
+
+# Initialize SDRAM controller
+define sdram_init
+  set *(unsigned long *)0x00ef6008 = 0x00000182
+  set *(unsigned long *)0x00ef600c = 0x00000001
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef602c = 0x00000010
+  set *(unsigned long *)0x00ef6028 = 0x00000300
+  set *(unsigned long *)0x00ef6048 = 0x00000001
+  set *(unsigned long *)0x00ef6020 = 0x01000041
+  set *(unsigned long *)0x00ef6004 = 0x00010117
+  set *(unsigned long *)0x00ef6010 = 0x00000001
+  set *(unsigned long *)0x00ef6024 = 0x00000001
+end
+document sdram_init
+  SDRAM controller initialization
+  0x01000000 - 0x017fffff (8MB)
+end
+
+# Initialize LAN controller
+define lanc_init
+  set *(unsigned long *)0x00ef5008 = 0x03031303
+  #RST DRV (P64)
+  set *(unsigned char *)0x00ef1046 = 0x08
+  set *(unsigned char *)0x00ef1026 = 0xff
+  set *(unsigned char *)0x00ef1026 = 0x00
+  set *(unsigned short *)0x02000630 = 0xffff
+end
+
+# Show current task structure
+define show_current
+  set $current = $spi & 0xffffe000
+  printf "$current=0x%08lX\n",$current
+  print *(struct task_struct *)$current
+end
+
+# Show user assigned task structure
+define show_task
+  set  = $arg0 & 0xffffe000
+  printf "$task=0x%08lX\n",$task
+  print *(struct task_struct *)$task
+end
+document show_task
+  Show user assigned task structure
+  arg0 : task structure address
+end
+
+# Show M32R registers
+define show_regs
+  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
+  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
+  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
+  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
+  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
+  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
+end
+
+# Setup all
+define setup
+  use_mon_code
+  set *(unsigned int)0xfffffffc=0x60
+  shell sleep 0.1
+  clock_init
+  shell sleep 0.1
+  port_init
+  sdram_init
+  lanc_init
+end
+
+# Load modules
+define load_modules
+  use_debug_dma
+  load
+end
+
+# Set kernel parameters
+define set_kernel_parameters
+  set $param = (void*)0x01001000
+  # INITRD_START
+#  set *(unsigned long *)($param + 0x0010) = 0x00000000
+  # INITRD_SIZE
+#  set *(unsigned long *)($param + 0x0014) = 0x00000000
+  # M32R_CPUCLK
+  set *(unsigned long *)($param + 0x0018) = 0d66666667
+  # M32R_BUSCLK
+  set *(unsigned long *)($param + 0x001c) = 0d33333333
+
+  # M32R_TIMER_DIVIDE
+  set *(unsigned long *)($param + 0x0020) = 0d128
+
+  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0"
+end
+
+# Boot
+define boot
+  set_kernel_parameters
+  set $fp = 0
+  set $pc = 0x01002000
+  si
+  c
+end
+
+# Set breakpoints
+define set_breakpoints
+  b *0x00000020
+  b *0x00000030
+end
+
+# Restart
+define restart
+  sdireset
+  sdireset
+  setup
+  load_modules
+  boot
+end
+
+sdireset
+sdireset
+file vmlinux
+target m32rsdi
+setup
+#load_modules
+#set_breakpoints
+#boot
+
diff --git a/arch/m32r/oprofile/Kconfig b/arch/m32r/oprofile/Kconfig
new file mode 100644
index 0000000..19d3773
--- /dev/null
+++ b/arch/m32r/oprofile/Kconfig
@@ -0,0 +1,23 @@
+
+menu "Profiling support"
+	depends on EXPERIMENTAL
+
+config PROFILING
+	bool "Profiling support (EXPERIMENTAL)"
+	help
+	  Say Y here to enable the extended profiling support mechanisms used
+	  by profilers such as OProfile.
+
+
+config OPROFILE
+	tristate "OProfile system profiling (EXPERIMENTAL)"
+	depends on PROFILING
+	help
+	  OProfile is a profiling system capable of profiling the
+	  whole system, include the kernel, kernel modules, libraries,
+	  and applications.
+
+	  If unsure, say N.
+
+endmenu
+
diff --git a/arch/m32r/oprofile/Makefile b/arch/m32r/oprofile/Makefile
new file mode 100644
index 0000000..06e7c81
--- /dev/null
+++ b/arch/m32r/oprofile/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
+		oprof.o cpu_buffer.o buffer_sync.o \
+		event_buffer.o oprofile_files.o \
+		oprofilefs.o oprofile_stats.o \
+		timer_int.o )
+
+oprofile-y := $(DRIVER_OBJS) init.o
diff --git a/arch/m32r/oprofile/init.c b/arch/m32r/oprofile/init.c
new file mode 100644
index 0000000..b7773e4
--- /dev/null
+++ b/arch/m32r/oprofile/init.c
@@ -0,0 +1,22 @@
+/**
+ * @file init.c
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author John Levon <levon@movementarian.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/oprofile.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+int __init oprofile_arch_init(struct oprofile_operations * ops)
+{
+	return -ENODEV;
+}
+
+void oprofile_arch_exit(void)
+{
+}
diff --git a/arch/m32r/opsput/defconfig.opsput b/arch/m32r/opsput/defconfig.opsput
new file mode 100644
index 0000000..a87e1ea
--- /dev/null
+++ b/arch/m32r/opsput/defconfig.opsput
@@ -0,0 +1,692 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:11:41 2005
+#
+CONFIG_M32R=y
+# CONFIG_UID16 is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor type and features
+#
+# CONFIG_PLAT_MAPPI is not set
+# CONFIG_PLAT_USRV is not set
+# CONFIG_PLAT_M32700UT is not set
+CONFIG_PLAT_OPSPUT=y
+# CONFIG_PLAT_OAKS32R is not set
+# CONFIG_PLAT_MAPPI2 is not set
+# CONFIG_CHIP_M32700 is not set
+# CONFIG_CHIP_M32102 is not set
+# CONFIG_CHIP_VDEC2 is not set
+CONFIG_CHIP_OPSP=y
+CONFIG_MMU=y
+CONFIG_TLB_ENTRIES=32
+CONFIG_ISA_M32R2=y
+CONFIG_ISA_DSP_LEVEL2=y
+CONFIG_ISA_DUAL_ISSUE=y
+CONFIG_BUS_CLOCK=50000000
+CONFIG_TIMER_DIVIDE=128
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_NOHIGHMEM=y
+# CONFIG_DISCONTIGMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_SMP is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+CONFIG_M32R_CFC=y
+CONFIG_M32R_CFC_NUM=1
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_NE2000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_M32R_SIO=y
+CONFIG_SERIAL_M32R_SIO_CONSOLE=y
+CONFIG_SERIAL_M32R_PLDSIO=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_DS1302=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+CONFIG_JBD_DEBUG=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/m32r/opsput/dot.gdbinit b/arch/m32r/opsput/dot.gdbinit
new file mode 100644
index 0000000..b7e6c66
--- /dev/null
+++ b/arch/m32r/opsput/dot.gdbinit
@@ -0,0 +1,218 @@
+# .gdbinit file
+# $Id: dot.gdbinit,v 1.1 2004/07/27 06:54:20 sakugawa Exp $
+
+# setting
+set width 0d70
+set radix 0d16
+set height 0
+debug_chaos
+
+# clk xin:cpu:bus=1:8:1
+define clock_init_on_181
+  set *(unsigned long *)0x00ef400c = 0x2
+  set *(unsigned long *)0x00ef4004 = 0x1
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4000 = 0x101
+end
+# clk xin:cpu:bus=1:8:2
+define clock_init_on_182
+  set *(unsigned long *)0x00ef400c = 0x1
+  set *(unsigned long *)0x00ef4004 = 0x1
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4000 = 0x101
+end
+
+# clk xin:cpu:bus=1:8:4
+define clock_init_on_184
+  set *(unsigned long *)0x00ef400c = 0x0
+  set *(unsigned long *)0x00ef4004 = 0x1
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4000 = 0x101
+end
+
+# clk xin:cpu:bus=1:1:1
+define clock_init_off
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4000 = 0x0
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4004 = 0x0
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef400c = 0x0
+end
+
+define tlb_init
+  set $tlbbase = 0xfe000000
+  set *(unsigned long *)($tlbbase + 0x04) = 0x0
+  set *(unsigned long *)($tlbbase + 0x0c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x14) = 0x0
+  set *(unsigned long *)($tlbbase + 0x1c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x24) = 0x0
+  set *(unsigned long *)($tlbbase + 0x2c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x34) = 0x0
+  set *(unsigned long *)($tlbbase + 0x3c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x44) = 0x0
+  set *(unsigned long *)($tlbbase + 0x4c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x54) = 0x0
+  set *(unsigned long *)($tlbbase + 0x5c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x64) = 0x0
+  set *(unsigned long *)($tlbbase + 0x6c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x74) = 0x0
+  set *(unsigned long *)($tlbbase + 0x7c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x84) = 0x0
+  set *(unsigned long *)($tlbbase + 0x8c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x94) = 0x0
+  set *(unsigned long *)($tlbbase + 0x9c) = 0x0
+  set *(unsigned long *)($tlbbase + 0xa4) = 0x0
+  set *(unsigned long *)($tlbbase + 0xac) = 0x0
+  set *(unsigned long *)($tlbbase + 0xb4) = 0x0
+  set *(unsigned long *)($tlbbase + 0xbc) = 0x0
+  set *(unsigned long *)($tlbbase + 0xc4) = 0x0
+  set *(unsigned long *)($tlbbase + 0xcc) = 0x0
+  set *(unsigned long *)($tlbbase + 0xd4) = 0x0
+  set *(unsigned long *)($tlbbase + 0xdc) = 0x0
+  set *(unsigned long *)($tlbbase + 0xe4) = 0x0
+  set *(unsigned long *)($tlbbase + 0xec) = 0x0
+  set *(unsigned long *)($tlbbase + 0xf4) = 0x0
+  set *(unsigned long *)($tlbbase + 0xfc) = 0x0
+  set $tlbbase = 0xfe000800
+  set *(unsigned long *)($tlbbase + 0x04) = 0x0
+  set *(unsigned long *)($tlbbase + 0x0c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x14) = 0x0
+  set *(unsigned long *)($tlbbase + 0x1c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x24) = 0x0
+  set *(unsigned long *)($tlbbase + 0x2c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x34) = 0x0
+  set *(unsigned long *)($tlbbase + 0x3c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x44) = 0x0
+  set *(unsigned long *)($tlbbase + 0x4c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x54) = 0x0
+  set *(unsigned long *)($tlbbase + 0x5c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x64) = 0x0
+  set *(unsigned long *)($tlbbase + 0x6c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x74) = 0x0
+  set *(unsigned long *)($tlbbase + 0x7c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x84) = 0x0
+  set *(unsigned long *)($tlbbase + 0x8c) = 0x0
+  set *(unsigned long *)($tlbbase + 0x94) = 0x0
+  set *(unsigned long *)($tlbbase + 0x9c) = 0x0
+  set *(unsigned long *)($tlbbase + 0xa4) = 0x0
+  set *(unsigned long *)($tlbbase + 0xac) = 0x0
+  set *(unsigned long *)($tlbbase + 0xb4) = 0x0
+  set *(unsigned long *)($tlbbase + 0xbc) = 0x0
+  set *(unsigned long *)($tlbbase + 0xc4) = 0x0
+  set *(unsigned long *)($tlbbase + 0xcc) = 0x0
+  set *(unsigned long *)($tlbbase + 0xd4) = 0x0
+  set *(unsigned long *)($tlbbase + 0xdc) = 0x0
+  set *(unsigned long *)($tlbbase + 0xe4) = 0x0
+  set *(unsigned long *)($tlbbase + 0xec) = 0x0
+  set *(unsigned long *)($tlbbase + 0xf4) = 0x0
+  set *(unsigned long *)($tlbbase + 0xfc) = 0x0
+end
+
+define load_modules
+  use_debug_dma
+  load
+end
+
+# Set kernel parameters
+define set_kernel_parameters
+  set $param = (void*)0x88001000
+  # INITRD_START
+#  set *(unsigned long *)($param + 0x0010) = 0x08300000
+  # INITRD_SIZE
+#  set *(unsigned long *)($param + 0x0014) = 0x00400000
+  # M32R_CPUCLK
+  set *(unsigned long *)($param + 0x0018) = 0d200000000
+  # M32R_BUSCLK
+  set *(unsigned long *)($param + 0x001c) = 0d50000000
+#  set *(unsigned long *)($param + 0x001c) = 0d25000000
+
+  # M32R_TIMER_DIVIDE
+  set *(unsigned long *)($param + 0x0020) = 0d128
+
+  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 \
+  root=/dev/nfsroot \
+  nfsroot=192.168.0.1:/project/m32r-linux/export/root.2.6 \
+  nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \
+  mem=16m \0"
+end
+
+define boot
+  set_kernel_parameters
+  set $pc=0x88002000
+  set $fp=0
+  set $evb=0x88000000
+  si
+  c
+end
+
+# Show TLB entries
+define show_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  use_mon_code
+  while ($i < 0d32 )
+    set $tlb_tag = *(unsigned long*)$addr
+    set $tlb_data = *(unsigned long*)($addr + 4)
+    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+#  use_debug_dma
+end
+define itlb
+  set $itlb=0xfe000000
+  show_tlb_entries $itlb
+end
+define dtlb
+  set $dtlb=0xfe000800
+  show_tlb_entries $dtlb
+end
+
+define show_regs
+  printf " R0[%08lx]   R1[%08lx]   R2[%08lx]   R3[%08lx]\n",$r0,$r1,$r2,$r3
+  printf " R4[%08lx]   R5[%08lx]   R6[%08lx]   R7[%08lx]\n",$r4,$r5,$r6,$r7
+  printf " R8[%08lx]   R9[%08lx]  R10[%08lx]  R11[%08lx]\n",$r8,$r9,$r10,$r11
+  printf "R12[%08lx]   FP[%08lx]   LR[%08lx]   SP[%08lx]\n",$r12,$fp,$lr,$sp
+  printf "PSW[%08lx]  CBR[%08lx]  SPI[%08lx]  SPU[%08lx]\n",$psw,$cbr,$spi,$spu
+  printf "BPC[%08lx]   PC[%08lx] ACCL[%08lx] ACCH[%08lx]\n",$bpc,$pc,$accl,$acch
+  printf "EVB[%08lx]\n",$evb
+end
+
+define restart
+  sdireset
+  sdireset
+  en 1
+  set $pc=0x0
+  c
+  tlb_init
+  setup
+  load_modules
+  boot
+end
+
+define setup
+  debug_chaos
+# Clock
+#  shell sleep 0.1
+#  clock_init_off
+#  shell sleep 1
+#  clock_init_on_182
+#  shell sleep 0.1
+# SDRAM
+  set *(unsigned long *)0xa0ef6004 = 0x0001053f
+  set *(unsigned long *)0xa0ef6028 = 0x00031102
+end
+
+sdireset
+sdireset
+file vmlinux
+target m32rsdi
+set $pc=0x0
+b *0x30000
+c
+dis 1
+setup
+tlb_init
+load_modules
+boot