Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c
new file mode 100644
index 0000000..5b80d7c
--- /dev/null
+++ b/arch/m68k/mac/misc.c
@@ -0,0 +1,651 @@
+/*
+ * Miscellaneous Mac68K-specific stuff
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/mm.h>
+
+#include <linux/adb.h>
+#include <linux/cuda.h>
+#include <linux/pmu.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
+#include <asm/system.h>
+#include <asm/segment.h>
+#include <asm/setup.h>
+#include <asm/macintosh.h>
+#include <asm/mac_via.h>
+#include <asm/mac_oss.h>
+
+#define BOOTINFO_COMPAT_1_0
+#include <asm/bootinfo.h>
+#include <asm/machdep.h>
+
+/* Offset between Unix time (1970-based) and Mac time (1904-based) */
+
+#define RTC_OFFSET 2082844800
+
+extern struct mac_booter_data mac_bi_data;
+static void (*rom_reset)(void);
+
+#ifdef CONFIG_ADB
+/*
+ * Return the current time as the number of seconds since January 1, 1904.
+ */
+
+static long adb_read_time(void)
+{
+ volatile struct adb_request req;
+ long time;
+
+ adb_request((struct adb_request *) &req, NULL,
+ ADBREQ_RAW|ADBREQ_SYNC,
+ 2, CUDA_PACKET, CUDA_GET_TIME);
+
+ time = (req.reply[3] << 24) | (req.reply[4] << 16)
+ | (req.reply[5] << 8) | req.reply[6];
+ return time - RTC_OFFSET;
+}
+
+/*
+ * Set the current system time
+ */
+
+static void adb_write_time(long data)
+{
+ volatile struct adb_request req;
+
+ data += RTC_OFFSET;
+
+ adb_request((struct adb_request *) &req, NULL,
+ ADBREQ_RAW|ADBREQ_SYNC,
+ 6, CUDA_PACKET, CUDA_SET_TIME,
+ (data >> 24) & 0xFF, (data >> 16) & 0xFF,
+ (data >> 8) & 0xFF, data & 0xFF);
+}
+
+/*
+ * Get a byte from the NVRAM
+ */
+
+static __u8 adb_read_pram(int offset)
+{
+ volatile struct adb_request req;
+
+ adb_request((struct adb_request *) &req, NULL,
+ ADBREQ_RAW|ADBREQ_SYNC,
+ 4, CUDA_PACKET, CUDA_GET_PRAM,
+ (offset >> 8) & 0xFF, offset & 0xFF);
+ return req.reply[3];
+}
+
+/*
+ * Write a byte to the NVRAM
+ */
+
+static void adb_write_pram(int offset, __u8 data)
+{
+ volatile struct adb_request req;
+
+ adb_request((struct adb_request *) &req, NULL,
+ ADBREQ_RAW|ADBREQ_SYNC,
+ 5, CUDA_PACKET, CUDA_SET_PRAM,
+ (offset >> 8) & 0xFF, offset & 0xFF,
+ data);
+}
+#endif /* CONFIG_ADB */
+
+/*
+ * VIA PRAM/RTC access routines
+ *
+ * Must be called with interrupts disabled and
+ * the RTC should be enabled.
+ */
+
+static __u8 via_pram_readbyte(void)
+{
+ int i,reg;
+ __u8 data;
+
+ reg = via1[vBufB] & ~VIA1B_vRTCClk;
+
+ /* Set the RTC data line to be an input. */
+
+ via1[vDirB] &= ~VIA1B_vRTCData;
+
+ /* The bits of the byte come out in MSB order */
+
+ data = 0;
+ for (i = 0 ; i < 8 ; i++) {
+ via1[vBufB] = reg;
+ via1[vBufB] = reg | VIA1B_vRTCClk;
+ data = (data << 1) | (via1[vBufB] & VIA1B_vRTCData);
+ }
+
+ /* Return RTC data line to output state */
+
+ via1[vDirB] |= VIA1B_vRTCData;
+
+ return data;
+}
+
+static void via_pram_writebyte(__u8 data)
+{
+ int i,reg,bit;
+
+ reg = via1[vBufB] & ~(VIA1B_vRTCClk | VIA1B_vRTCData);
+
+ /* The bits of the byte go in in MSB order */
+
+ for (i = 0 ; i < 8 ; i++) {
+ bit = data & 0x80? 1 : 0;
+ data <<= 1;
+ via1[vBufB] = reg | bit;
+ via1[vBufB] = reg | bit | VIA1B_vRTCClk;
+ }
+}
+
+/*
+ * Execute a VIA PRAM/RTC command. For read commands
+ * data should point to a one-byte buffer for the
+ * resulting data. For write commands it should point
+ * to the data byte to for the command.
+ *
+ * This function disables all interrupts while running.
+ */
+
+static void via_pram_command(int command, __u8 *data)
+{
+ unsigned long flags;
+ int is_read;
+
+ local_irq_save(flags);
+
+ /* Enable the RTC and make sure the strobe line is high */
+
+ via1[vBufB] = (via1[vBufB] | VIA1B_vRTCClk) & ~VIA1B_vRTCEnb;
+
+ if (command & 0xFF00) { /* extended (two-byte) command */
+ via_pram_writebyte((command & 0xFF00) >> 8);
+ via_pram_writebyte(command & 0xFF);
+ is_read = command & 0x8000;
+ } else { /* one-byte command */
+ via_pram_writebyte(command);
+ is_read = command & 0x80;
+ }
+ if (is_read) {
+ *data = via_pram_readbyte();
+ } else {
+ via_pram_writebyte(*data);
+ }
+
+ /* All done, disable the RTC */
+
+ via1[vBufB] |= VIA1B_vRTCEnb;
+
+ local_irq_restore(flags);
+}
+
+static __u8 via_read_pram(int offset)
+{
+ return 0;
+}
+
+static void via_write_pram(int offset, __u8 data)
+{
+}
+
+/*
+ * Return the current time in seconds since January 1, 1904.
+ *
+ * This only works on machines with the VIA-based PRAM/RTC, which
+ * is basically any machine with Mac II-style ADB.
+ */
+
+static long via_read_time(void)
+{
+ union {
+ __u8 cdata[4];
+ long idata;
+ } result, last_result;
+ int ct;
+
+ /*
+ * The NetBSD guys say to loop until you get the same reading
+ * twice in a row.
+ */
+
+ ct = 0;
+ do {
+ if (++ct > 10) {
+ printk("via_read_time: couldn't get valid time, "
+ "last read = 0x%08lx and 0x%08lx\n",
+ last_result.idata, result.idata);
+ break;
+ }
+
+ last_result.idata = result.idata;
+ result.idata = 0;
+
+ via_pram_command(0x81, &result.cdata[3]);
+ via_pram_command(0x85, &result.cdata[2]);
+ via_pram_command(0x89, &result.cdata[1]);
+ via_pram_command(0x8D, &result.cdata[0]);
+ } while (result.idata != last_result.idata);
+
+ return result.idata - RTC_OFFSET;
+}
+
+/*
+ * Set the current time to a number of seconds since January 1, 1904.
+ *
+ * This only works on machines with the VIA-based PRAM/RTC, which
+ * is basically any machine with Mac II-style ADB.
+ */
+
+static void via_write_time(long time)
+{
+ union {
+ __u8 cdata[4];
+ long idata;
+ } data;
+ __u8 temp;
+
+ /* Clear the write protect bit */
+
+ temp = 0x55;
+ via_pram_command(0x35, &temp);
+
+ data.idata = time + RTC_OFFSET;
+ via_pram_command(0x01, &data.cdata[3]);
+ via_pram_command(0x05, &data.cdata[2]);
+ via_pram_command(0x09, &data.cdata[1]);
+ via_pram_command(0x0D, &data.cdata[0]);
+
+ /* Set the write protect bit */
+
+ temp = 0xD5;
+ via_pram_command(0x35, &temp);
+}
+
+static void via_shutdown(void)
+{
+ if (rbv_present) {
+ via2[rBufB] &= ~0x04;
+ } else {
+ /* Direction of vDirB is output */
+ via2[vDirB] |= 0x04;
+ /* Send a value of 0 on that line */
+ via2[vBufB] &= ~0x04;
+ mdelay(1000);
+ }
+}
+
+/*
+ * FIXME: not sure how this is supposed to work exactly...
+ */
+
+static void oss_shutdown(void)
+{
+ oss->rom_ctrl = OSS_POWEROFF;
+}
+
+#ifdef CONFIG_ADB_CUDA
+
+static void cuda_restart(void)
+{
+ adb_request(NULL, NULL, ADBREQ_RAW|ADBREQ_SYNC,
+ 2, CUDA_PACKET, CUDA_RESET_SYSTEM);
+}
+
+static void cuda_shutdown(void)
+{
+ adb_request(NULL, NULL, ADBREQ_RAW|ADBREQ_SYNC,
+ 2, CUDA_PACKET, CUDA_POWERDOWN);
+}
+
+#endif /* CONFIG_ADB_CUDA */
+
+#ifdef CONFIG_ADB_PMU
+
+void pmu_restart(void)
+{
+ adb_request(NULL, NULL, ADBREQ_RAW|ADBREQ_SYNC,
+ 3, PMU_PACKET, PMU_SET_INTR_MASK,
+ PMU_INT_ADB|PMU_INT_TICK);
+
+ adb_request(NULL, NULL, ADBREQ_RAW|ADBREQ_SYNC,
+ 2, PMU_PACKET, PMU_RESET);
+}
+
+void pmu_shutdown(void)
+{
+ adb_request(NULL, NULL, ADBREQ_RAW|ADBREQ_SYNC,
+ 3, PMU_PACKET, PMU_SET_INTR_MASK,
+ PMU_INT_ADB|PMU_INT_TICK);
+
+ adb_request(NULL, NULL, ADBREQ_RAW|ADBREQ_SYNC,
+ 6, PMU_PACKET, PMU_SHUTDOWN,
+ 'M', 'A', 'T', 'T');
+}
+
+#endif /* CONFIG_ADB_PMU */
+
+/*
+ *-------------------------------------------------------------------
+ * Below this point are the generic routines; they'll dispatch to the
+ * correct routine for the hardware on which we're running.
+ *-------------------------------------------------------------------
+ */
+
+void mac_pram_read(int offset, __u8 *buffer, int len)
+{
+ __u8 (*func)(int) = NULL;
+ int i;
+
+ if (macintosh_config->adb_type == MAC_ADB_IISI ||
+ macintosh_config->adb_type == MAC_ADB_PB1 ||
+ macintosh_config->adb_type == MAC_ADB_PB2 ||
+ macintosh_config->adb_type == MAC_ADB_CUDA) {
+#ifdef CONFIG_ADB
+ func = adb_read_pram;
+#else
+ return;
+#endif
+ } else {
+ func = via_read_pram;
+ }
+ for (i = 0 ; i < len ; i++) {
+ buffer[i] = (*func)(offset++);
+ }
+}
+
+void mac_pram_write(int offset, __u8 *buffer, int len)
+{
+ void (*func)(int, __u8) = NULL;
+ int i;
+
+ if (macintosh_config->adb_type == MAC_ADB_IISI ||
+ macintosh_config->adb_type == MAC_ADB_PB1 ||
+ macintosh_config->adb_type == MAC_ADB_PB2 ||
+ macintosh_config->adb_type == MAC_ADB_CUDA) {
+#ifdef CONFIG_ADB
+ func = adb_write_pram;
+#else
+ return;
+#endif
+ } else {
+ func = via_write_pram;
+ }
+ for (i = 0 ; i < len ; i++) {
+ (*func)(offset++, buffer[i]);
+ }
+}
+
+void mac_poweroff(void)
+{
+ /*
+ * MAC_ADB_IISI may need to be moved up here if it doesn't actually
+ * work using the ADB packet method. --David Kilzer
+ */
+
+ if (oss_present) {
+ oss_shutdown();
+ } else if (macintosh_config->adb_type == MAC_ADB_II) {
+ via_shutdown();
+#ifdef CONFIG_ADB_CUDA
+ } else if (macintosh_config->adb_type == MAC_ADB_CUDA) {
+ cuda_shutdown();
+#endif
+#ifdef CONFIG_ADB_PMU
+ } else if (macintosh_config->adb_type == MAC_ADB_PB1
+ || macintosh_config->adb_type == MAC_ADB_PB2) {
+ pmu_shutdown();
+#endif
+ }
+ local_irq_enable();
+ printk("It is now safe to turn off your Macintosh.\n");
+ while(1);
+}
+
+void mac_reset(void)
+{
+ if (macintosh_config->adb_type == MAC_ADB_II) {
+ unsigned long flags;
+
+ /* need ROMBASE in booter */
+ /* indeed, plus need to MAP THE ROM !! */
+
+ if (mac_bi_data.rombase == 0)
+ mac_bi_data.rombase = 0x40800000;
+
+ /* works on some */
+ rom_reset = (void *) (mac_bi_data.rombase + 0xa);
+
+ if (macintosh_config->ident == MAC_MODEL_SE30) {
+ /*
+ * MSch: Machines known to crash on ROM reset ...
+ */
+ } else {
+ local_irq_save(flags);
+
+ rom_reset();
+
+ local_irq_restore(flags);
+ }
+#ifdef CONFIG_ADB_CUDA
+ } else if (macintosh_config->adb_type == MAC_ADB_CUDA) {
+ cuda_restart();
+#endif
+#ifdef CONFIG_ADB_PMU
+ } else if (macintosh_config->adb_type == MAC_ADB_PB1
+ || macintosh_config->adb_type == MAC_ADB_PB2) {
+ pmu_restart();
+#endif
+ } else if (CPU_IS_030) {
+
+ /* 030-specific reset routine. The idea is general, but the
+ * specific registers to reset are '030-specific. Until I
+ * have a non-030 machine, I can't test anything else.
+ * -- C. Scott Ananian <cananian@alumni.princeton.edu>
+ */
+
+ unsigned long rombase = 0x40000000;
+
+ /* make a 1-to-1 mapping, using the transparent tran. reg. */
+ unsigned long virt = (unsigned long) mac_reset;
+ unsigned long phys = virt_to_phys(mac_reset);
+ unsigned long offset = phys-virt;
+ local_irq_disable(); /* lets not screw this up, ok? */
+ __asm__ __volatile__(".chip 68030\n\t"
+ "pmove %0,%/tt0\n\t"
+ ".chip 68k"
+ : : "m" ((phys&0xFF000000)|0x8777));
+ /* Now jump to physical address so we can disable MMU */
+ __asm__ __volatile__(
+ ".chip 68030\n\t"
+ "lea %/pc@(1f),%/a0\n\t"
+ "addl %0,%/a0\n\t"/* fixup target address and stack ptr */
+ "addl %0,%/sp\n\t"
+ "pflusha\n\t"
+ "jmp %/a0@\n\t" /* jump into physical memory */
+ "0:.long 0\n\t" /* a constant zero. */
+ /* OK. Now reset everything and jump to reset vector. */
+ "1:\n\t"
+ "lea %/pc@(0b),%/a0\n\t"
+ "pmove %/a0@, %/tc\n\t" /* disable mmu */
+ "pmove %/a0@, %/tt0\n\t" /* disable tt0 */
+ "pmove %/a0@, %/tt1\n\t" /* disable tt1 */
+ "movel #0, %/a0\n\t"
+ "movec %/a0, %/vbr\n\t" /* clear vector base register */
+ "movec %/a0, %/cacr\n\t" /* disable caches */
+ "movel #0x0808,%/a0\n\t"
+ "movec %/a0, %/cacr\n\t" /* flush i&d caches */
+ "movew #0x2700,%/sr\n\t" /* set up status register */
+ "movel %1@(0x0),%/a0\n\t"/* load interrupt stack pointer */
+ "movec %/a0, %/isp\n\t"
+ "movel %1@(0x4),%/a0\n\t" /* load reset vector */
+ "reset\n\t" /* reset external devices */
+ "jmp %/a0@\n\t" /* jump to the reset vector */
+ ".chip 68k"
+ : : "r" (offset), "a" (rombase) : "a0");
+ }
+
+ /* should never get here */
+ local_irq_enable();
+ printk ("Restart failed. Please restart manually.\n");
+ while(1);
+}
+
+/*
+ * This function translates seconds since 1970 into a proper date.
+ *
+ * Algorithm cribbed from glibc2.1, __offtime().
+ */
+#define SECS_PER_MINUTE (60)
+#define SECS_PER_HOUR (SECS_PER_MINUTE * 60)
+#define SECS_PER_DAY (SECS_PER_HOUR * 24)
+
+static void unmktime(unsigned long time, long offset,
+ int *yearp, int *monp, int *dayp,
+ int *hourp, int *minp, int *secp)
+{
+ /* How many days come before each month (0-12). */
+ static const unsigned short int __mon_yday[2][13] =
+ {
+ /* Normal years. */
+ { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
+ /* Leap years. */
+ { 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
+ };
+ long int days, rem, y, wday, yday;
+ const unsigned short int *ip;
+
+ days = time / SECS_PER_DAY;
+ rem = time % SECS_PER_DAY;
+ rem += offset;
+ while (rem < 0) {
+ rem += SECS_PER_DAY;
+ --days;
+ }
+ while (rem >= SECS_PER_DAY) {
+ rem -= SECS_PER_DAY;
+ ++days;
+ }
+ *hourp = rem / SECS_PER_HOUR;
+ rem %= SECS_PER_HOUR;
+ *minp = rem / SECS_PER_MINUTE;
+ *secp = rem % SECS_PER_MINUTE;
+ /* January 1, 1970 was a Thursday. */
+ wday = (4 + days) % 7; /* Day in the week. Not currently used */
+ if (wday < 0) wday += 7;
+ y = 1970;
+
+#define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
+#define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
+#define __isleap(year) \
+ ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
+
+ while (days < 0 || days >= (__isleap (y) ? 366 : 365))
+ {
+ /* Guess a corrected year, assuming 365 days per year. */
+ long int yg = y + days / 365 - (days % 365 < 0);
+
+ /* Adjust DAYS and Y to match the guessed year. */
+ days -= ((yg - y) * 365
+ + LEAPS_THRU_END_OF (yg - 1)
+ - LEAPS_THRU_END_OF (y - 1));
+ y = yg;
+ }
+ *yearp = y - 1900;
+ yday = days; /* day in the year. Not currently used. */
+ ip = __mon_yday[__isleap(y)];
+ for (y = 11; days < (long int) ip[y]; --y)
+ continue;
+ days -= ip[y];
+ *monp = y;
+ *dayp = days + 1; /* day in the month */
+ return;
+}
+
+/*
+ * Read/write the hardware clock.
+ */
+
+int mac_hwclk(int op, struct rtc_time *t)
+{
+ unsigned long now;
+
+ if (!op) { /* read */
+ if (macintosh_config->adb_type == MAC_ADB_II) {
+ now = via_read_time();
+ } else
+#ifdef CONFIG_ADB
+ if ((macintosh_config->adb_type == MAC_ADB_IISI) ||
+ (macintosh_config->adb_type == MAC_ADB_PB1) ||
+ (macintosh_config->adb_type == MAC_ADB_PB2) ||
+ (macintosh_config->adb_type == MAC_ADB_CUDA)) {
+ now = adb_read_time();
+ } else
+#endif
+ if (macintosh_config->adb_type == MAC_ADB_IOP) {
+ now = via_read_time();
+ } else {
+ now = 0;
+ }
+
+ t->tm_wday = 0;
+ unmktime(now, 0,
+ &t->tm_year, &t->tm_mon, &t->tm_mday,
+ &t->tm_hour, &t->tm_min, &t->tm_sec);
+ printk("mac_hwclk: read %04d-%02d-%-2d %02d:%02d:%02d\n",
+ t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
+ } else { /* write */
+ printk("mac_hwclk: tried to write %04d-%02d-%-2d %02d:%02d:%02d\n",
+ t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
+
+#if 0 /* it trashes my rtc */
+ now = mktime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
+ t->tm_hour, t->tm_min, t->tm_sec);
+
+ if (macintosh_config->adb_type == MAC_ADB_II) {
+ via_write_time(now);
+ } else if ((macintosh_config->adb_type == MAC_ADB_IISI) ||
+ (macintosh_config->adb_type == MAC_ADB_PB1) ||
+ (macintosh_config->adb_type == MAC_ADB_PB2) ||
+ (macintosh_config->adb_type == MAC_ADB_CUDA)) {
+ adb_write_time(now);
+ } else if (macintosh_config->adb_type == MAC_ADB_IOP) {
+ via_write_time(now);
+ }
+#endif
+ }
+ return 0;
+}
+
+/*
+ * Set minutes/seconds in the hardware clock
+ */
+
+int mac_set_clock_mmss (unsigned long nowtime)
+{
+ struct rtc_time now;
+
+ mac_hwclk(0, &now);
+ now.tm_sec = nowtime % 60;
+ now.tm_min = (nowtime / 60) % 60;
+ mac_hwclk(1, &now);
+
+ return 0;
+}