Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c
new file mode 100644
index 0000000..3377e66
--- /dev/null
+++ b/arch/mips/mips-boards/malta/malta_setup.c
@@ -0,0 +1,231 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+
+#ifdef CONFIG_MTD
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#endif
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/malta.h>
+#include <asm/mips-boards/maltaint.h>
+#include <asm/dma.h>
+#include <asm/time.h>
+#include <asm/traps.h>
+#ifdef CONFIG_VT
+#include <linux/console.h>
+#endif
+
+extern void mips_reboot_setup(void);
+extern void mips_time_init(void);
+extern void mips_timer_setup(struct irqaction *irq);
+extern unsigned long mips_rtc_get_time(void);
+
+#ifdef CONFIG_KGDB
+extern void kgdb_config(void);
+#endif
+
+struct resource standard_io_resources[] = {
+	{ "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
+	{ "timer", 0x40, 0x5f, IORESOURCE_BUSY },
+	{ "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
+	{ "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
+	{ "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
+};
+
+#ifdef CONFIG_MTD
+static struct mtd_partition malta_mtd_partitions[] = {
+	{
+		.name =		"YAMON",
+		.offset =	0x0,
+		.size =		0x100000,
+		.mask_flags =	MTD_WRITEABLE
+	},
+	{
+		.name =		"User FS",
+		.offset = 	0x100000,
+		.size =		0x2e0000
+	},
+	{
+		.name =		"Board Config",
+		.offset =	0x3e0000,
+		.size =		0x020000,
+		.mask_flags =	MTD_WRITEABLE
+	}
+};
+
+#define number_partitions	(sizeof(malta_mtd_partitions)/sizeof(struct mtd_partition))
+#endif
+
+const char *get_system_type(void)
+{
+	return "MIPS Malta";
+}
+
+#ifdef CONFIG_BLK_DEV_FD
+void __init fd_activate(void)
+{
+	/*
+	 * Activate Floppy Controller in the SMSC FDC37M817 Super I/O
+	 * Controller.
+	 * Done by YAMON 2.00 onwards
+	 */
+	/* Entering config state. */
+	SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG);
+
+	/* Activate floppy controller. */
+	SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG);
+	SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG);
+	SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG);
+	SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG);
+
+	/* Exit config state. */
+	SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG);
+}
+#endif
+
+static int __init malta_setup(void)
+{
+	unsigned int i;
+
+	/* Request I/O space for devices used on the Malta board. */
+	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
+		request_resource(&ioport_resource, standard_io_resources+i);
+
+	/*
+	 * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge.
+	 */
+	enable_dma(4);
+
+#ifdef CONFIG_KGDB
+	kgdb_config ();
+#endif
+
+	if ((mips_revision_corid == MIPS_REVISION_CORID_BONITO64) ||
+	    (mips_revision_corid == MIPS_REVISION_CORID_CORE_20K) ||
+	    (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL_BON)) {
+		char *argptr;
+
+		argptr = prom_getcmdline();
+		if (strstr(argptr, "debug")) {
+			BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE;
+			printk ("Enabled Bonito debug mode\n");
+		}
+		else
+			BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE;
+
+#ifdef CONFIG_DMA_COHERENT
+		if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) {
+			BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN;
+			printk("Enabled Bonito CPU coherency\n");
+
+			argptr = prom_getcmdline();
+			if (strstr(argptr, "iobcuncached")) {
+				BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN;
+				BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & 
+					~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
+					  BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
+				printk("Disabled Bonito IOBC coherency\n");
+			}
+			else {
+				BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN;
+				BONITO_PCIMEMBASECFG |= 
+					(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | 
+					 BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
+				printk("Disabled Bonito IOBC coherency\n");
+			}
+		}
+		else
+			panic("Hardware DMA cache coherency not supported");
+
+#endif
+	}
+#ifdef CONFIG_DMA_COHERENT
+	else {
+		panic("Hardware DMA cache coherency not supported");
+	}
+#endif
+
+#ifdef CONFIG_BLK_DEV_IDE
+	/* Check PCI clock */
+	{
+		int jmpr = (*((volatile unsigned int *)ioremap(MALTA_JMPRS_REG, sizeof(unsigned int))) >> 2) & 0x07;
+		static const int pciclocks[] __initdata = {
+			33, 20, 25, 30, 12, 16, 37, 10
+		};
+		int pciclock = pciclocks[jmpr];
+		char *argptr = prom_getcmdline();
+
+		if (pciclock != 33 && !strstr (argptr, "idebus=")) {
+			printk("WARNING: PCI clock is %dMHz, setting idebus\n", pciclock);
+			argptr += strlen(argptr);
+			sprintf (argptr, " idebus=%d", pciclock);
+			if (pciclock < 20 || pciclock > 66)
+				printk ("WARNING: IDE timing calculations will be incorrect\n");
+		}
+	}
+#endif
+#ifdef CONFIG_BLK_DEV_FD
+	fd_activate ();
+#endif
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+	screen_info = (struct screen_info) {
+		0, 25,			/* orig-x, orig-y */
+		0,			/* unused */
+		0,			/* orig-video-page */
+		0,			/* orig-video-mode */
+		80,			/* orig-video-cols */
+		0,0,0,			/* ega_ax, ega_bx, ega_cx */
+		25,			/* orig-video-lines */
+		VIDEO_TYPE_VGAC,	/* orig-video-isVGA */
+		16			/* orig-video-points */
+	};
+#endif
+#endif
+
+#ifdef CONFIG_MTD
+	/*
+	 * Support for MTD on Malta. Use the generic physmap driver
+	 */
+	physmap_configure(0x1e000000, 0x400000, 4, NULL);
+	physmap_set_partitions(malta_mtd_partitions, number_partitions);
+#endif
+
+	mips_reboot_setup();
+
+	board_time_init = mips_time_init;
+	board_timer_setup = mips_timer_setup;
+	rtc_get_time = mips_rtc_get_time;
+
+	return 0;
+}
+
+early_initcall(malta_setup);