Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c
new file mode 100644
index 0000000..b9296d9
--- /dev/null
+++ b/arch/mips/pci/fixup-malta.c
@@ -0,0 +1,103 @@
+#include <linux/init.h>
+#include <linux/pci.h>
+
+/* PCI interrupt pins */
+#define PCIA 1
+#define PCIB 2
+#define PCIC 3
+#define PCID 4
+
+/* This table is filled in by interrogating the PIIX4 chip */
+static char pci_irq[5] __initdata;
+
+static char irq_tab[][5] __initdata = {
+ /* INTA INTB INTC INTD */
+ {0, 0, 0, 0, 0 }, /* 0: GT64120 PCI bridge */
+ {0, 0, 0, 0, 0 }, /* 1: Unused */
+ {0, 0, 0, 0, 0 }, /* 2: Unused */
+ {0, 0, 0, 0, 0 }, /* 3: Unused */
+ {0, 0, 0, 0, 0 }, /* 4: Unused */
+ {0, 0, 0, 0, 0 }, /* 5: Unused */
+ {0, 0, 0, 0, 0 }, /* 6: Unused */
+ {0, 0, 0, 0, 0 }, /* 7: Unused */
+ {0, 0, 0, 0, 0 }, /* 8: Unused */
+ {0, 0, 0, 0, 0 }, /* 9: Unused */
+ {0, 0, 0, 0, PCID }, /* 10: PIIX4 USB */
+ {0, PCIB, 0, 0, 0 }, /* 11: AMD 79C973 Ethernet */
+ {0, PCIC, 0, 0, 0 }, /* 12: Crystal 4281 Sound */
+ {0, 0, 0, 0, 0 }, /* 13: Unused */
+ {0, 0, 0, 0, 0 }, /* 14: Unused */
+ {0, 0, 0, 0, 0 }, /* 15: Unused */
+ {0, 0, 0, 0, 0 }, /* 16: Unused */
+ {0, 0, 0, 0, 0 }, /* 17: Bonito/SOC-it PCI Bridge*/
+ {0, PCIA, PCIB, PCIC, PCID }, /* 18: PCI Slot 1 */
+ {0, PCIB, PCIC, PCID, PCIA }, /* 19: PCI Slot 2 */
+ {0, PCIC, PCID, PCIA, PCIB }, /* 20: PCI Slot 3 */
+ {0, PCID, PCIA, PCIB, PCIC } /* 21: PCI Slot 4 */
+};
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int virq;
+ virq = irq_tab[slot][pin];
+ return pci_irq[virq];
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static void __init malta_piix_func0_fixup(struct pci_dev *pdev)
+{
+ unsigned char reg_val;
+ static int piixirqmap[16] __initdata = { /* PIIX PIRQC[A:D] irq mappings */
+ 0, 0, 0, 3,
+ 4, 5, 6, 7,
+ 0, 9, 10, 11,
+ 12, 0, 14, 15
+ };
+ int i;
+
+ /* Interrogate PIIX4 to get PCI IRQ mapping */
+ for (i = 0; i <= 3; i++) {
+ pci_read_config_byte(pdev, 0x60+i, ®_val);
+ if (reg_val & 0x80)
+ pci_irq[PCIA+i] = 0; /* Disabled */
+ else
+ pci_irq[PCIA+i] = piixirqmap[reg_val & 15];
+ }
+
+ /* Done by YAMON 2.00 onwards */
+ if (PCI_SLOT(pdev->devfn) == 10) {
+ /*
+ * Set top of main memory accessible by ISA or DMA
+ * devices to 16 Mb.
+ */
+ pci_read_config_byte(pdev, 0x69, ®_val);
+ pci_write_config_byte(pdev, 0x69, reg_val | 0xf0);
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
+ malta_piix_func0_fixup);
+
+static void __init malta_piix_func1_fixup(struct pci_dev *pdev)
+{
+ unsigned char reg_val;
+
+ /* Done by YAMON 2.02 onwards */
+ if (PCI_SLOT(pdev->devfn) == 10) {
+ /*
+ * IDE Decode enable.
+ */
+ pci_read_config_byte(pdev, 0x41, ®_val);
+ pci_write_config_byte(pdev, 0x41, reg_val|0x80);
+ pci_read_config_byte(pdev, 0x43, ®_val);
+ pci_write_config_byte(pdev, 0x43, reg_val|0x80);
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB,
+ malta_piix_func1_fixup);