Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
new file mode 100644
index 0000000..80c38c5
--- /dev/null
+++ b/arch/x86_64/Kconfig
@@ -0,0 +1,477 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+# Note: ISA is disabled and will hopefully never be enabled.
+# If you managed to buy an ISA x86-64 box you'll have to fix all the
+# ISA drivers you need yourself.
+#
+
+mainmenu "Linux Kernel Configuration"
+
+config X86_64
+ bool
+ default y
+ help
+ Port to the x86-64 architecture. x86-64 is a 64-bit extension to the
+ classical 32-bit x86 architecture. For details see
+ <http://www.x86-64.org/>.
+
+config 64BIT
+ def_bool y
+
+config X86
+ bool
+ default y
+
+config MMU
+ bool
+ default y
+
+config ISA
+ bool
+
+config SBUS
+ bool
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config X86_CMPXCHG
+ bool
+ default y
+
+config EARLY_PRINTK
+ bool
+ default y
+
+config GENERIC_ISA_DMA
+ bool
+ default y
+
+config GENERIC_IOMAP
+ bool
+ default y
+
+source "init/Kconfig"
+
+
+menu "Processor type and features"
+
+choice
+ prompt "Processor family"
+ default MK8
+
+config MK8
+ bool "AMD-Opteron/Athlon64"
+ help
+ Optimize for AMD Opteron/Athlon64/Hammer/K8 CPUs.
+
+config MPSC
+ bool "Intel EM64T"
+ help
+ Optimize for Intel Pentium 4 and Xeon CPUs with Intel
+ Extended Memory 64 Technology(EM64T). For details see
+ <http://www.intel.com/technology/64bitextensions/>.
+
+config GENERIC_CPU
+ bool "Generic-x86-64"
+ help
+ Generic x86-64 CPU.
+
+endchoice
+
+#
+# Define implied options from the CPU selection here
+#
+config X86_L1_CACHE_BYTES
+ int
+ default "128" if GENERIC_CPU || MPSC
+ default "64" if MK8
+
+config X86_L1_CACHE_SHIFT
+ int
+ default "7" if GENERIC_CPU || MPSC
+ default "6" if MK8
+
+config X86_TSC
+ bool
+ default y
+
+config X86_GOOD_APIC
+ bool
+ default y
+
+config MICROCODE
+ tristate "/dev/cpu/microcode - Intel CPU microcode support"
+ ---help---
+ If you say Y here the 'File systems' section, you will be
+ able to update the microcode on Intel processors. You will
+ obviously need the actual microcode binary data itself which is
+ not shipped with the Linux kernel.
+
+ For latest news and information on obtaining all the required
+ ingredients for this driver, check:
+ <http://www.urbanmyth.org/microcode/>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called microcode.
+ If you use modprobe or kmod you may also want to add the line
+ 'alias char-major-10-184 microcode' to your /etc/modules.conf file.
+
+config X86_MSR
+ tristate "/dev/cpu/*/msr - Model-specific register support"
+ help
+ This device gives privileged processes access to the x86
+ Model-Specific Registers (MSRs). It is a character device with
+ major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
+ MSR accesses are directed to a specific CPU on multi-processor
+ systems.
+
+config X86_CPUID
+ tristate "/dev/cpu/*/cpuid - CPU information support"
+ help
+ This device gives processes access to the x86 CPUID instruction to
+ be executed on a specific processor. It is a character device
+ with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
+ /dev/cpu/31/cpuid.
+
+# disable it for opteron optimized builds because it pulls in ACPI_BOOT
+config X86_HT
+ bool
+ depends on SMP && !MK8
+ default y
+
+config MATH_EMULATION
+ bool
+
+config MCA
+ bool
+
+config EISA
+ bool
+
+config X86_IO_APIC
+ bool
+ default y
+
+config X86_LOCAL_APIC
+ bool
+ default y
+
+config MTRR
+ bool "MTRR (Memory Type Range Register) support"
+ ---help---
+ On Intel P6 family processors (Pentium Pro, Pentium II and later)
+ the Memory Type Range Registers (MTRRs) may be used to control
+ processor access to memory ranges. This is most useful if you have
+ a video (VGA) card on a PCI or AGP bus. Enabling write-combining
+ allows bus write transfers to be combined into a larger transfer
+ before bursting over the PCI/AGP bus. This can increase performance
+ of image write operations 2.5 times or more. Saying Y here creates a
+ /proc/mtrr file which may be used to manipulate your processor's
+ MTRRs. Typically the X server should use this.
+
+ This code has a reasonably generic interface so that similar
+ control registers on other processors can be easily supported
+ as well.
+
+ Saying Y here also fixes a problem with buggy SMP BIOSes which only
+ set the MTRRs for the boot CPU and not for the secondary CPUs. This
+ can lead to all sorts of problems, so it's good to say Y here.
+
+ Just say Y here, all x86-64 machines support MTRRs.
+
+ See <file:Documentation/mtrr.txt> for more information.
+
+config SMP
+ bool "Symmetric multi-processing support"
+ ---help---
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, like most personal computers, say N. If
+ you have a system with more than one CPU, say Y.
+
+ If you say N here, the kernel will run on single and multiprocessor
+ machines, but will use only one CPU of a multiprocessor machine. If
+ you say Y here, the kernel will run on many, but not all,
+ singleprocessor machines. On a singleprocessor machine, the kernel
+ will run faster if you say N here.
+
+ If you don't know what to do here, say N.
+
+config PREEMPT
+ bool "Preemptible Kernel"
+ ---help---
+ This option reduces the latency of the kernel when reacting to
+ real-time or interactive events by allowing a low priority process to
+ be preempted even if it is in kernel mode executing a system call.
+ This allows applications to run more reliably even when the system is
+ under load. On contrary it may also break your drivers and add
+ priority inheritance problems to your system. Don't select it if
+ you rely on a stable system or have slightly obscure hardware.
+ It's also not very well tested on x86-64 currently.
+ You have been warned.
+
+ Say Y here if you are feeling brave and building a kernel for a
+ desktop, embedded or real-time system. Say N if you are unsure.
+
+config PREEMPT_BKL
+ bool "Preempt The Big Kernel Lock"
+ depends on PREEMPT
+ default y
+ help
+ This option reduces the latency of the kernel by making the
+ big kernel lock preemptible.
+
+ Say Y here if you are building a kernel for a desktop system.
+ Say N if you are unsure.
+
+config SCHED_SMT
+ bool "SMT (Hyperthreading) scheduler support"
+ depends on SMP
+ default n
+ help
+ SMT scheduler support improves the CPU scheduler's decision making
+ when dealing with Intel Pentium 4 chips with HyperThreading at a
+ cost of slightly increased overhead in some places. If unsure say
+ N here.
+
+config K8_NUMA
+ bool "K8 NUMA support"
+ select NUMA
+ depends on SMP
+ help
+ Enable NUMA (Non Unified Memory Architecture) support for
+ AMD Opteron Multiprocessor systems. The kernel will try to allocate
+ memory used by a CPU on the local memory controller of the CPU
+ and add some more NUMA awareness to the kernel.
+ This code is recommended on all multiprocessor Opteron systems
+ and normally doesn't hurt on others.
+
+config NUMA_EMU
+ bool "NUMA emulation support"
+ select NUMA
+ depends on SMP
+ help
+ Enable NUMA emulation. A flat machine will be split
+ into virtual nodes when booted with "numa=fake=N", where N is the
+ number of nodes. This is only useful for debugging.
+
+config DISCONTIGMEM
+ bool
+ depends on NUMA
+ default y
+
+config NUMA
+ bool
+ default n
+
+config HAVE_DEC_LOCK
+ bool
+ depends on SMP
+ default y
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-256)"
+ range 2 256
+ depends on SMP
+ default "8"
+ help
+ This allows you to specify the maximum number of CPUs which this
+ kernel will support. Current maximum is 256 CPUs due to
+ APIC addressing limits. Less depending on the hardware.
+
+ This is purely to save memory - each supported CPU requires
+ memory in the static kernel configuration.
+
+config HPET_TIMER
+ bool
+ default y
+ help
+ Use the IA-PC HPET (High Precision Event Timer) to manage
+ time in preference to the PIT and RTC, if a HPET is
+ present. The HPET provides a stable time base on SMP
+ systems, unlike the TSC, but it is more expensive to access,
+ as it is off-chip. You can find the HPET spec at
+ <http://www.intel.com/labs/platcomp/hpet/hpetspec.htm>.
+
+config HPET_EMULATE_RTC
+ bool "Provide RTC interrupt"
+ depends on HPET_TIMER && RTC=y
+
+config GART_IOMMU
+ bool "IOMMU support"
+ depends on PCI
+ help
+ Support the K8 IOMMU. Needed to run systems with more than 4GB of memory
+ properly with 32-bit PCI devices that do not support DAC (Double Address
+ Cycle). The IOMMU can be turned off at runtime with the iommu=off parameter.
+ Normally the kernel will take the right choice by itself.
+ If unsure, say Y.
+
+# need this always enabled with GART_IOMMU for the VIA workaround
+config SWIOTLB
+ bool
+ depends on GART_IOMMU
+ default y
+
+config DUMMY_IOMMU
+ bool
+ depends on !GART_IOMMU && !SWIOTLB
+ default y
+ help
+ Don't use IOMMU code. This will cause problems when you have more than 4GB
+ of memory and any 32-bit devices. Don't turn on unless you know what you
+ are doing.
+
+config X86_MCE
+ bool "Machine check support" if EMBEDDED
+ default y
+ help
+ Include a machine check error handler to report hardware errors.
+ This version will require the mcelog utility to decode some
+ machine check error logs. See
+ ftp://ftp.x86-64.org/pub/linux/tools/mcelog
+
+config X86_MCE_INTEL
+ bool "Intel MCE features"
+ depends on X86_MCE && X86_LOCAL_APIC
+ default y
+ help
+ Additional support for intel specific MCE features such as
+ the thermal monitor.
+
+config SECCOMP
+ bool "Enable seccomp to safely compute untrusted bytecode"
+ depends on PROC_FS
+ default y
+ help
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via /proc/<pid>/seccomp, it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
+ If unsure, say Y. Only embedded should say N here.
+
+endmenu
+
+#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
+menu "Power management options"
+
+source kernel/power/Kconfig
+
+source "drivers/acpi/Kconfig"
+
+source "arch/x86_64/kernel/cpufreq/Kconfig"
+
+endmenu
+
+menu "Bus options (PCI etc.)"
+
+config PCI
+ bool "PCI support"
+
+# x86-64 doesn't support PCI BIOS access from long mode so always go direct.
+config PCI_DIRECT
+ bool
+ depends on PCI
+ default y
+
+config PCI_MMCONFIG
+ bool "Support mmconfig PCI config space access"
+ depends on PCI
+ select ACPI_BOOT
+
+config UNORDERED_IO
+ bool "Unordered IO mapping access"
+ depends on EXPERIMENTAL
+ help
+ Use unordered stores to access IO memory mappings in device drivers.
+ Still very experimental. When a driver works on IA64/ppc64/pa-risc it should
+ work with this option, but it makes the drivers behave differently
+ from i386. Requires that the driver writer used memory barriers
+ properly.
+
+source "drivers/pci/pcie/Kconfig"
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+
+menu "Executable file formats / Emulations"
+
+source "fs/Kconfig.binfmt"
+
+config IA32_EMULATION
+ bool "IA32 Emulation"
+ help
+ Include code to run 32-bit programs under a 64-bit kernel. You should likely
+ turn this on, unless you're 100% sure that you don't have any 32-bit programs
+ left.
+
+config IA32_AOUT
+ bool "IA32 a.out support"
+ depends on IA32_EMULATION
+ help
+ Support old a.out binaries in the 32bit emulation.
+
+config COMPAT
+ bool
+ depends on IA32_EMULATION
+ default y
+
+config SYSVIPC_COMPAT
+ bool
+ depends on COMPAT && SYSVIPC
+ default y
+
+config UID16
+ bool
+ depends on IA32_EMULATION
+ default y
+
+endmenu
+
+source drivers/Kconfig
+
+source "drivers/firmware/Kconfig"
+
+source fs/Kconfig
+
+source "arch/x86_64/oprofile/Kconfig"
+
+source "arch/x86_64/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"