Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
new file mode 100644
index 0000000..543f93e
--- /dev/null
+++ b/drivers/bluetooth/Kconfig
@@ -0,0 +1,168 @@
+
+menu "Bluetooth device drivers"
+ depends on BT
+
+config BT_HCIUSB
+ tristate "HCI USB driver"
+ depends on USB
+ help
+ Bluetooth HCI USB driver.
+ This driver is required if you want to use Bluetooth devices with
+ USB interface.
+
+ Say Y here to compile support for Bluetooth USB devices into the
+ kernel or say M to compile it as module (hci_usb).
+
+config BT_HCIUSB_SCO
+ bool "SCO (voice) support"
+ depends on BT_HCIUSB
+ help
+ This option enables the SCO support in the HCI USB driver. You need this
+ to transmit voice data with your Bluetooth USB device.
+
+ Say Y here to compile support for SCO over HCI USB.
+
+config BT_HCIUART
+ tristate "HCI UART driver"
+ help
+ Bluetooth HCI UART driver.
+ This driver is required if you want to use Bluetooth devices with
+ serial port interface. You will also need this driver if you have
+ UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
+ adapter and BrainBoxes Bluetooth PC Card.
+
+ Say Y here to compile support for Bluetooth UART devices into the
+ kernel or say M to compile it as module (hci_uart).
+
+config BT_HCIUART_H4
+ bool "UART (H4) protocol support"
+ depends on BT_HCIUART
+ help
+ UART (H4) is serial protocol for communication between Bluetooth
+ device and host. This protocol is required for most Bluetooth devices
+ with UART interface, including PCMCIA and CF cards.
+
+ Say Y here to compile support for HCI UART (H4) protocol.
+
+config BT_HCIUART_BCSP
+ bool "BCSP protocol support"
+ depends on BT_HCIUART
+ help
+ BCSP (BlueCore Serial Protocol) is serial protocol for communication
+ between Bluetooth device and host. This protocol is required for non
+ USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
+ CF cards.
+
+ Say Y here to compile support for HCI BCSP protocol.
+
+config BT_HCIUART_BCSP_TXCRC
+ bool "Transmit CRC with every BCSP packet"
+ depends on BT_HCIUART_BCSP
+ help
+ If you say Y here, a 16-bit CRC checksum will be transmitted along with
+ every BCSP (BlueCore Serial Protocol) packet sent to the Bluetooth chip.
+ This increases reliability, but slightly reduces efficiency.
+
+config BT_HCIBCM203X
+ tristate "HCI BCM203x USB driver"
+ depends on USB
+ select FW_LOADER
+ help
+ Bluetooth HCI BCM203x USB driver.
+ This driver provides the firmware loading mechanism for the Broadcom
+ Blutonium based devices.
+
+ Say Y here to compile support for HCI BCM203x devices into the
+ kernel or say M to compile it as module (bcm203x).
+
+config BT_HCIBPA10X
+ tristate "HCI BPA10x USB driver"
+ depends on USB
+ help
+ Bluetooth HCI BPA10x USB driver.
+ This driver provides support for the Digianswer BPA 100/105 Bluetooth
+ sniffer devices.
+
+ Say Y here to compile support for HCI BPA10x devices into the
+ kernel or say M to compile it as module (bpa10x).
+
+config BT_HCIBFUSB
+ tristate "HCI BlueFRITZ! USB driver"
+ depends on USB
+ select FW_LOADER
+ help
+ Bluetooth HCI BlueFRITZ! USB driver.
+ This driver provides support for Bluetooth USB devices with AVM
+ interface:
+ AVM BlueFRITZ! USB
+
+ Say Y here to compile support for HCI BFUSB devices into the
+ kernel or say M to compile it as module (bfusb).
+
+config BT_HCIDTL1
+ tristate "HCI DTL1 (PC Card) driver"
+ depends on PCMCIA
+ help
+ Bluetooth HCI DTL1 (PC Card) driver.
+ This driver provides support for Bluetooth PCMCIA devices with
+ Nokia DTL1 interface:
+ Nokia Bluetooth Card
+ Socket Bluetooth CF Card
+
+ Say Y here to compile support for HCI DTL1 devices into the
+ kernel or say M to compile it as module (dtl1_cs).
+
+config BT_HCIBT3C
+ tristate "HCI BT3C (PC Card) driver"
+ depends on PCMCIA
+ select FW_LOADER
+ help
+ Bluetooth HCI BT3C (PC Card) driver.
+ This driver provides support for Bluetooth PCMCIA devices with
+ 3Com BT3C interface:
+ 3Com Bluetooth Card (3CRWB6096)
+ HP Bluetooth Card
+
+ Say Y here to compile support for HCI BT3C devices into the
+ kernel or say M to compile it as module (bt3c_cs).
+
+config BT_HCIBLUECARD
+ tristate "HCI BlueCard (PC Card) driver"
+ depends on PCMCIA
+ help
+ Bluetooth HCI BlueCard (PC Card) driver.
+ This driver provides support for Bluetooth PCMCIA devices with
+ Anycom BlueCard interface:
+ Anycom Bluetooth PC Card
+ Anycom Bluetooth CF Card
+
+ Say Y here to compile support for HCI BlueCard devices into the
+ kernel or say M to compile it as module (bluecard_cs).
+
+config BT_HCIBTUART
+ tristate "HCI UART (PC Card) device driver"
+ depends on PCMCIA
+ help
+ Bluetooth HCI UART (PC Card) driver.
+ This driver provides support for Bluetooth PCMCIA devices with
+ an UART interface:
+ Xircom CreditCard Bluetooth Adapter
+ Xircom RealPort2 Bluetooth Adapter
+ Sphinx PICO Card
+ H-Soft blue+Card
+ Cyber-blue Compact Flash Card
+
+ Say Y here to compile support for HCI UART devices into the
+ kernel or say M to compile it as module (btuart_cs).
+
+config BT_HCIVHCI
+ tristate "HCI VHCI (Virtual HCI device) driver"
+ help
+ Bluetooth Virtual HCI device driver.
+ This driver is required if you want to use HCI Emulation software.
+
+ Say Y here to compile support for virtual HCI devices into the
+ kernel or say M to compile it as module (hci_vhci).
+
+endmenu
+