Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
new file mode 100644
index 0000000..9cce833a
--- /dev/null
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -0,0 +1,373 @@
+/*
+ * Copyright (C) 2004 IBM Corporation
+ *
+ * Authors:
+ * Leendert van Doorn <leendert@watson.ibm.com>
+ * Dave Safford <safford@watson.ibm.com>
+ * Reiner Sailer <sailer@watson.ibm.com>
+ * Kylene Hall <kjhall@us.ibm.com>
+ *
+ * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ *
+ * Device driver for TCG/TCPA TPM (trusted platform module).
+ * Specifications at www.trustedcomputinggroup.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ */
+
+#include "tpm.h"
+
+/* National definitions */
+#define TPM_NSC_BASE 0x360
+#define TPM_NSC_IRQ 0x07
+
+#define NSC_LDN_INDEX 0x07
+#define NSC_SID_INDEX 0x20
+#define NSC_LDC_INDEX 0x30
+#define NSC_DIO_INDEX 0x60
+#define NSC_CIO_INDEX 0x62
+#define NSC_IRQ_INDEX 0x70
+#define NSC_ITS_INDEX 0x71
+
+#define NSC_STATUS 0x01
+#define NSC_COMMAND 0x01
+#define NSC_DATA 0x00
+
+/* status bits */
+#define NSC_STATUS_OBF 0x01 /* output buffer full */
+#define NSC_STATUS_IBF 0x02 /* input buffer full */
+#define NSC_STATUS_F0 0x04 /* F0 */
+#define NSC_STATUS_A2 0x08 /* A2 */
+#define NSC_STATUS_RDY 0x10 /* ready to receive command */
+#define NSC_STATUS_IBR 0x20 /* ready to receive data */
+
+/* command bits */
+#define NSC_COMMAND_NORMAL 0x01 /* normal mode */
+#define NSC_COMMAND_EOC 0x03
+#define NSC_COMMAND_CANCEL 0x22
+
+/*
+ * Wait for a certain status to appear
+ */
+static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data)
+{
+ int expired = 0;
+ struct timer_list status_timer =
+ TIMER_INITIALIZER(tpm_time_expired, jiffies + 10 * HZ,
+ (unsigned long) &expired);
+
+ /* status immediately available check */
+ *data = inb(chip->vendor->base + NSC_STATUS);
+ if ((*data & mask) == val)
+ return 0;
+
+ /* wait for status */
+ add_timer(&status_timer);
+ do {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(TPM_TIMEOUT);
+ *data = inb(chip->vendor->base + 1);
+ if ((*data & mask) == val) {
+ del_singleshot_timer_sync(&status_timer);
+ return 0;
+ }
+ }
+ while (!expired);
+
+ return -EBUSY;
+}
+
+static int nsc_wait_for_ready(struct tpm_chip *chip)
+{
+ int status;
+ int expired = 0;
+ struct timer_list status_timer =
+ TIMER_INITIALIZER(tpm_time_expired, jiffies + 100,
+ (unsigned long) &expired);
+
+ /* status immediately available check */
+ status = inb(chip->vendor->base + NSC_STATUS);
+ if (status & NSC_STATUS_OBF)
+ status = inb(chip->vendor->base + NSC_DATA);
+ if (status & NSC_STATUS_RDY)
+ return 0;
+
+ /* wait for status */
+ add_timer(&status_timer);
+ do {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(TPM_TIMEOUT);
+ status = inb(chip->vendor->base + NSC_STATUS);
+ if (status & NSC_STATUS_OBF)
+ status = inb(chip->vendor->base + NSC_DATA);
+ if (status & NSC_STATUS_RDY) {
+ del_singleshot_timer_sync(&status_timer);
+ return 0;
+ }
+ }
+ while (!expired);
+
+ dev_info(&chip->pci_dev->dev, "wait for ready failed\n");
+ return -EBUSY;
+}
+
+
+static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count)
+{
+ u8 *buffer = buf;
+ u8 data, *p;
+ u32 size;
+ __be32 *native_size;
+
+ if (count < 6)
+ return -EIO;
+
+ if (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0) {
+ dev_err(&chip->pci_dev->dev, "F0 timeout\n");
+ return -EIO;
+ }
+ if ((data =
+ inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_NORMAL) {
+ dev_err(&chip->pci_dev->dev, "not in normal mode (0x%x)\n",
+ data);
+ return -EIO;
+ }
+
+ /* read the whole packet */
+ for (p = buffer; p < &buffer[count]; p++) {
+ if (wait_for_stat
+ (chip, NSC_STATUS_OBF, NSC_STATUS_OBF, &data) < 0) {
+ dev_err(&chip->pci_dev->dev,
+ "OBF timeout (while reading data)\n");
+ return -EIO;
+ }
+ if (data & NSC_STATUS_F0)
+ break;
+ *p = inb(chip->vendor->base + NSC_DATA);
+ }
+
+ if ((data & NSC_STATUS_F0) == 0) {
+ dev_err(&chip->pci_dev->dev, "F0 not set\n");
+ return -EIO;
+ }
+ if ((data = inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_EOC) {
+ dev_err(&chip->pci_dev->dev,
+ "expected end of command(0x%x)\n", data);
+ return -EIO;
+ }
+
+ native_size = (__force __be32 *) (buf + 2);
+ size = be32_to_cpu(*native_size);
+
+ if (count < size)
+ return -EIO;
+
+ return size;
+}
+
+static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count)
+{
+ u8 data;
+ int i;
+
+ /*
+ * If we hit the chip with back to back commands it locks up
+ * and never set IBF. Hitting it with this "hammer" seems to
+ * fix it. Not sure why this is needed, we followed the flow
+ * chart in the manual to the letter.
+ */
+ outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND);
+
+ if (nsc_wait_for_ready(chip) != 0)
+ return -EIO;
+
+ if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
+ dev_err(&chip->pci_dev->dev, "IBF timeout\n");
+ return -EIO;
+ }
+
+ outb(NSC_COMMAND_NORMAL, chip->vendor->base + NSC_COMMAND);
+ if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) {
+ dev_err(&chip->pci_dev->dev, "IBR timeout\n");
+ return -EIO;
+ }
+
+ for (i = 0; i < count; i++) {
+ if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
+ dev_err(&chip->pci_dev->dev,
+ "IBF timeout (while writing data)\n");
+ return -EIO;
+ }
+ outb(buf[i], chip->vendor->base + NSC_DATA);
+ }
+
+ if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
+ dev_err(&chip->pci_dev->dev, "IBF timeout\n");
+ return -EIO;
+ }
+ outb(NSC_COMMAND_EOC, chip->vendor->base + NSC_COMMAND);
+
+ return count;
+}
+
+static void tpm_nsc_cancel(struct tpm_chip *chip)
+{
+ outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND);
+}
+
+static struct file_operations nsc_ops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .open = tpm_open,
+ .read = tpm_read,
+ .write = tpm_write,
+ .release = tpm_release,
+};
+
+static struct tpm_vendor_specific tpm_nsc = {
+ .recv = tpm_nsc_recv,
+ .send = tpm_nsc_send,
+ .cancel = tpm_nsc_cancel,
+ .req_complete_mask = NSC_STATUS_OBF,
+ .req_complete_val = NSC_STATUS_OBF,
+ .base = TPM_NSC_BASE,
+ .miscdev = { .fops = &nsc_ops, },
+
+};
+
+static int __devinit tpm_nsc_init(struct pci_dev *pci_dev,
+ const struct pci_device_id *pci_id)
+{
+ int rc = 0;
+
+ if (pci_enable_device(pci_dev))
+ return -EIO;
+
+ if (tpm_lpc_bus_init(pci_dev, TPM_NSC_BASE)) {
+ rc = -ENODEV;
+ goto out_err;
+ }
+
+ /* verify that it is a National part (SID) */
+ if (tpm_read_index(NSC_SID_INDEX) != 0xEF) {
+ rc = -ENODEV;
+ goto out_err;
+ }
+
+ dev_dbg(&pci_dev->dev, "NSC TPM detected\n");
+ dev_dbg(&pci_dev->dev,
+ "NSC LDN 0x%x, SID 0x%x, SRID 0x%x\n",
+ tpm_read_index(0x07), tpm_read_index(0x20),
+ tpm_read_index(0x27));
+ dev_dbg(&pci_dev->dev,
+ "NSC SIOCF1 0x%x SIOCF5 0x%x SIOCF6 0x%x SIOCF8 0x%x\n",
+ tpm_read_index(0x21), tpm_read_index(0x25),
+ tpm_read_index(0x26), tpm_read_index(0x28));
+ dev_dbg(&pci_dev->dev, "NSC IO Base0 0x%x\n",
+ (tpm_read_index(0x60) << 8) | tpm_read_index(0x61));
+ dev_dbg(&pci_dev->dev, "NSC IO Base1 0x%x\n",
+ (tpm_read_index(0x62) << 8) | tpm_read_index(0x63));
+ dev_dbg(&pci_dev->dev, "NSC Interrupt number and wakeup 0x%x\n",
+ tpm_read_index(0x70));
+ dev_dbg(&pci_dev->dev, "NSC IRQ type select 0x%x\n",
+ tpm_read_index(0x71));
+ dev_dbg(&pci_dev->dev,
+ "NSC DMA channel select0 0x%x, select1 0x%x\n",
+ tpm_read_index(0x74), tpm_read_index(0x75));
+ dev_dbg(&pci_dev->dev,
+ "NSC Config "
+ "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+ tpm_read_index(0xF0), tpm_read_index(0xF1),
+ tpm_read_index(0xF2), tpm_read_index(0xF3),
+ tpm_read_index(0xF4), tpm_read_index(0xF5),
+ tpm_read_index(0xF6), tpm_read_index(0xF7),
+ tpm_read_index(0xF8), tpm_read_index(0xF9));
+
+ dev_info(&pci_dev->dev,
+ "NSC PC21100 TPM revision %d\n",
+ tpm_read_index(0x27) & 0x1F);
+
+ if (tpm_read_index(NSC_LDC_INDEX) == 0)
+ dev_info(&pci_dev->dev, ": NSC TPM not active\n");
+
+ /* select PM channel 1 */
+ tpm_write_index(NSC_LDN_INDEX, 0x12);
+ tpm_read_index(NSC_LDN_INDEX);
+
+ /* disable the DPM module */
+ tpm_write_index(NSC_LDC_INDEX, 0);
+ tpm_read_index(NSC_LDC_INDEX);
+
+ /* set the data register base addresses */
+ tpm_write_index(NSC_DIO_INDEX, TPM_NSC_BASE >> 8);
+ tpm_write_index(NSC_DIO_INDEX + 1, TPM_NSC_BASE);
+ tpm_read_index(NSC_DIO_INDEX);
+ tpm_read_index(NSC_DIO_INDEX + 1);
+
+ /* set the command register base addresses */
+ tpm_write_index(NSC_CIO_INDEX, (TPM_NSC_BASE + 1) >> 8);
+ tpm_write_index(NSC_CIO_INDEX + 1, (TPM_NSC_BASE + 1));
+ tpm_read_index(NSC_DIO_INDEX);
+ tpm_read_index(NSC_DIO_INDEX + 1);
+
+ /* set the interrupt number to be used for the host interface */
+ tpm_write_index(NSC_IRQ_INDEX, TPM_NSC_IRQ);
+ tpm_write_index(NSC_ITS_INDEX, 0x00);
+ tpm_read_index(NSC_IRQ_INDEX);
+
+ /* enable the DPM module */
+ tpm_write_index(NSC_LDC_INDEX, 0x01);
+ tpm_read_index(NSC_LDC_INDEX);
+
+ if ((rc = tpm_register_hardware(pci_dev, &tpm_nsc)) < 0)
+ goto out_err;
+
+ return 0;
+
+out_err:
+ pci_disable_device(pci_dev);
+ return rc;
+}
+
+static struct pci_device_id tpm_pci_tbl[] __devinitdata = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)},
+ {PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_LPC)},
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, tpm_pci_tbl);
+
+static struct pci_driver nsc_pci_driver = {
+ .name = "tpm_nsc",
+ .id_table = tpm_pci_tbl,
+ .probe = tpm_nsc_init,
+ .remove = __devexit_p(tpm_remove),
+ .suspend = tpm_pm_suspend,
+ .resume = tpm_pm_resume,
+};
+
+static int __init init_nsc(void)
+{
+ return pci_register_driver(&nsc_pci_driver);
+}
+
+static void __exit cleanup_nsc(void)
+{
+ pci_unregister_driver(&nsc_pci_driver);
+}
+
+module_init(init_nsc);
+module_exit(cleanup_nsc);
+
+MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
+MODULE_DESCRIPTION("TPM Driver");
+MODULE_VERSION("2.0");
+MODULE_LICENSE("GPL");